From f75345b9150ad4b7079dd924540a871c5a4e71c1 Mon Sep 17 00:00:00 2001 From: Andreas Fritiofson Date: Thu, 24 Jul 2014 23:14:03 +0200 Subject: [PATCH] drivers/jlink: Revert old workaround This workaround broke usage with at least the I.MX6Q. The comment implies that talking to the J-Link dongle itself should fail if the target isn't reset, which sounds really strange. I'm guessing it just triggered another bug in OpenOCD or Segger FW which might have been fixed since. Revert and wait and see if there are any failure reports. Tested with Kwikstik (J-Link + Kinetis K40), not with the mentioned adapter. Change-Id: I97f555efe079bd99c098bf483491d9509b2363ad Signed-off-by: Roy Spliet Signed-off-by: Andreas Fritiofson Reviewed-on: http://openocd.zylin.com/2147 Tested-by: jenkins Reviewed-by: Paul Fertser --- src/jtag/drivers/jlink.c | 22 ---------------------- 1 file changed, 22 deletions(-) diff --git a/src/jtag/drivers/jlink.c b/src/jtag/drivers/jlink.c index 9d25eb42bf..e7bda1dc50 100644 --- a/src/jtag/drivers/jlink.c +++ b/src/jtag/drivers/jlink.c @@ -507,28 +507,6 @@ static int jlink_init(void) return ERROR_JTAG_INIT_FAILED; } - /* - * The next three instructions were added after discovering a problem - * while using an oscilloscope. - * For the V8 SAM-ICE dongle (and likely other j-link device variants), - * the reset line to the target microprocessor was found to cycle only - * intermittently during emulator startup (even after encountering the - * downstream reset instruction later in the code). - * This was found to create two issues: - * 1) In general it is a bad practice to not reset a CPU to a known - * state when starting an emulator and - * 2) something critical happens inside the dongle when it does the - * first read following a new USB session. - * Keeping the processor in reset during the first read collecting - * version information seems to prevent errant - * "J-Link command EMU_CMD_VERSION failed" issues. - */ - - LOG_INFO("J-Link initialization started / target CPU reset initiated"); - jlink_simple_command(EMU_CMD_HW_TRST0); - jlink_simple_command(EMU_CMD_HW_RESET0); - usleep(1000); - jlink_hw_jtag_version = 2; if (jlink_get_version_info() == ERROR_OK) { -- 2.30.2