From eb427864e8b7f12fffe85327b03b9b9cdf397c1d Mon Sep 17 00:00:00 2001 From: Edward Fewell Date: Tue, 10 Mar 2020 15:11:43 -0500 Subject: [PATCH] tcl/target: Use vectreset for CC13xx/CC26xx targets. nSRST and sysreqreset are both broken for these targets. Upon a hard reset, the target disables the TDO/TDI pins and the ICEPick router will remove the target's TAP from the scan chain. The scripts to do these tasks are run, but then OpenOCD throws the reset again breaking the debug connection. Until that issue can be resolved, vectreset is the only reset that works without breaking the debug connection. Update: original patch didn't have the correct reset command. Change-Id: If7c985b703c87399a13364609d370d6222f4a66c Signed-off-by: Edward Fewell Reviewed-on: http://openocd.zylin.com/5511 Tested-by: jenkins Reviewed-by: Tomas Vanek --- tcl/target/ti_cc26x0.cfg | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/tcl/target/ti_cc26x0.cfg b/tcl/target/ti_cc26x0.cfg index 8d8a0df4ea..f95d7b2fca 100644 --- a/tcl/target/ti_cc26x0.cfg +++ b/tcl/target/ti_cc26x0.cfg @@ -52,5 +52,4 @@ $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE set _FLASHNAME $_CHIPNAME.flash flash bank $_FLASHNAME cc26xx 0 0 0 0 $_TARGETNAME -reset_config srst_only -adapter srst delay 100 +cortex_m reset_config vectreset -- 2.30.2