From be87994d60457ac846740dd9e5df3c8f63cf646e Mon Sep 17 00:00:00 2001 From: Stefan Arnold Date: Tue, 17 Oct 2017 10:50:13 +0200 Subject: [PATCH] flash/nor/at91samd: Add "nvmuserrow" command. Add option "nvmuserrow" to "at91samd" for changing and reading the register at 0x804000 which represents various fuses. Change-Id: I6382cc4ac15e6b9681e2f30b0ae60397a6289c3b Signed-off-by: Stefan Arnold Reviewed-on: http://openocd.zylin.com/4260 Tested-by: jenkins Reviewed-by: Tomas Vanek --- doc/openocd.texi | 20 +++ src/flash/nor/at91samd.c | 332 +++++++++++++++++++++++++++++---------- 2 files changed, 266 insertions(+), 86 deletions(-) diff --git a/doc/openocd.texi b/doc/openocd.texi index f6795e15b9..d0a3d49b8d 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -5319,6 +5319,26 @@ and prepares reset vector catch in case of reset halt. Command is used internally in event event reset-deassert-post. @end deffn +@deffn Command {at91samd nvmuserrow} +Writes or reads the entire 64 bit wide NVM user row register which is located at +0x804000. This register includes various fuses lock-bits and factory calibration +data. Reading the register is done by invoking this command without any +arguments. Writing is possible by giving 1 or 2 hex values. The first argument +is the register value to be written and the second one is an optional changemask. +Every bit which value in changemask is 0 will stay unchanged. The lock- and +reserved-bits are masked out and cannot be changed. + +@example +# Read user row +>at91samd nvmuserrow +NVMUSERROW: 0xFFFFFC5DD8E0C788 +# Write 0xFFFFFC5DD8E0C788 to user row +>at91samd nvmuserrow 0xFFFFFC5DD8E0C788 +# Write 0x12300 to user row but leave other bits and low byte unchanged +>at91samd nvmuserrow 0x12345 0xFFF00 +@end example +@end deffn + @end deffn @anchor{at91sam3} diff --git a/src/flash/nor/at91samd.c b/src/flash/nor/at91samd.c index 449a283ca7..64716d96ff 100644 --- a/src/flash/nor/at91samd.c +++ b/src/flash/nor/at91samd.c @@ -83,6 +83,9 @@ #define SAMD_GET_SERIES(id) (((id >> 16) & 0x3F)) #define SAMD_GET_DEVSEL(id) (id & 0xFF) +/* Bits to mask out lockbits in user row */ +#define NVMUSERROW_LOCKBIT_MASK ((uint64_t)0x0000FFFFFFFFFFFF) + struct samd_part { uint8_t id; const char *name; @@ -259,28 +262,38 @@ struct samd_family { uint8_t series; const struct samd_part *parts; size_t num_parts; + uint64_t nvm_userrow_res_mask; /* protect bits which are reserved, 0 -> protect */ }; /* Known SAMD families */ static const struct samd_family samd_families[] = { { SAMD_PROCESSOR_M0, SAMD_FAMILY_D, SAMD_SERIES_20, - samd20_parts, ARRAY_SIZE(samd20_parts) }, + samd20_parts, ARRAY_SIZE(samd20_parts), + (uint64_t)0xFFFF01FFFE01FF77 }, { SAMD_PROCESSOR_M0, SAMD_FAMILY_D, SAMD_SERIES_21, - samd21_parts, ARRAY_SIZE(samd21_parts) }, + samd21_parts, ARRAY_SIZE(samd21_parts), + (uint64_t)0xFFFF01FFFE01FF77 }, { SAMD_PROCESSOR_M0, SAMD_FAMILY_D, SAMD_SERIES_09, - samd09_parts, ARRAY_SIZE(samd09_parts) }, + samd09_parts, ARRAY_SIZE(samd09_parts), + (uint64_t)0xFFFF01FFFE01FF77 }, { SAMD_PROCESSOR_M0, SAMD_FAMILY_D, SAMD_SERIES_10, - samd10_parts, ARRAY_SIZE(samd10_parts) }, + samd10_parts, ARRAY_SIZE(samd10_parts), + (uint64_t)0xFFFF01FFFE01FF77 }, { SAMD_PROCESSOR_M0, SAMD_FAMILY_D, SAMD_SERIES_11, - samd11_parts, ARRAY_SIZE(samd11_parts) }, + samd11_parts, ARRAY_SIZE(samd11_parts), + (uint64_t)0xFFFF01FFFE01FF77 }, { SAMD_PROCESSOR_M0, SAMD_FAMILY_L, SAMD_SERIES_21, - saml21_parts, ARRAY_SIZE(saml21_parts) }, + saml21_parts, ARRAY_SIZE(saml21_parts), + (uint64_t)0xFFFF03FFFC01FF77 }, { SAMD_PROCESSOR_M0, SAMD_FAMILY_L, SAMD_SERIES_22, - saml22_parts, ARRAY_SIZE(saml22_parts) }, + saml22_parts, ARRAY_SIZE(saml22_parts), + (uint64_t)0xFFFF03FFFC01FF77 }, { SAMD_PROCESSOR_M0, SAMD_FAMILY_C, SAMD_SERIES_20, - samc20_parts, ARRAY_SIZE(samc20_parts) }, + samc20_parts, ARRAY_SIZE(samc20_parts), + (uint64_t)0xFFFF03FFFC01FF77 }, { SAMD_PROCESSOR_M0, SAMD_FAMILY_C, SAMD_SERIES_21, - samc21_parts, ARRAY_SIZE(samc21_parts) }, + samc21_parts, ARRAY_SIZE(samc21_parts), + (uint64_t)0xFFFF03FFFC01FF77 }, }; struct samd_info { @@ -296,24 +309,42 @@ struct samd_info { static struct samd_info *samd_chips; - - -static const struct samd_part *samd_find_part(uint32_t id) +/** + * Gives the family structure to specific device id. + * @param id The id of the device. + * @return On failure NULL, otherwise a pointer to the structure. + */ +static const struct samd_family *samd_find_family(uint32_t id) { uint8_t processor = SAMD_GET_PROCESSOR(id); uint8_t family = SAMD_GET_FAMILY(id); uint8_t series = SAMD_GET_SERIES(id); - uint8_t devsel = SAMD_GET_DEVSEL(id); for (unsigned i = 0; i < ARRAY_SIZE(samd_families); i++) { if (samd_families[i].processor == processor && samd_families[i].series == series && - samd_families[i].family == family) { - for (unsigned j = 0; j < samd_families[i].num_parts; j++) { - if (samd_families[i].parts[j].id == devsel) - return &samd_families[i].parts[j]; - } - } + samd_families[i].family == family) + return &samd_families[i]; + } + + return NULL; +} + +/** + * Gives the part structure to specific device id. + * @param id The id of the device. + * @return On failure NULL, otherwise a pointer to the structure. + */ +static const struct samd_part *samd_find_part(uint32_t id) +{ + uint8_t devsel = SAMD_GET_DEVSEL(id); + const struct samd_family *family = samd_find_family(id); + if (family == NULL) + return NULL; + + for (unsigned i = 0; i < family->num_parts; i++) { + if (family->parts[i].id == devsel) + return &family->parts[i]; } return NULL; @@ -484,6 +515,12 @@ static int samd_issue_nvmctrl_command(struct target *target, uint16_t cmd) return samd_check_error(target); } +/** + * Erases a flash-row at the given address. + * @param target Pointer to the target structure. + * @param address The address of the row. + * @return On success ERROR_OK, on failure an errorcode. + */ static int samd_erase_row(struct target *target, uint32_t address) { int res; @@ -505,49 +542,62 @@ static int samd_erase_row(struct target *target, uint32_t address) return ERROR_OK; } -static bool is_user_row_reserved_bit(uint8_t bit) +/** + * Returns the bitmask of reserved bits in register. + * @param target Pointer to the target structure. + * @param mask Bitmask, 0 -> value stays untouched. + * @return On success ERROR_OK, on failure an errorcode. + */ +static int samd_get_reservedmask(struct target *target, uint64_t *mask) { - /* See Table 9-3 in the SAMD20 datasheet for more information. */ - switch (bit) { - /* Reserved bits */ - case 3: - case 7: - /* Voltage regulator internal configuration with default value of 0x70, - * may not be changed. */ - case 17 ... 24: - /* 41 is voltage regulator internal configuration and must not be - * changed. 42 through 47 are reserved. */ - case 41 ... 47: - return true; - default: - break; + int res; + /* Get the devicetype */ + uint32_t id; + res = target_read_u32(target, SAMD_DSU + SAMD_DSU_DID, &id); + if (res != ERROR_OK) { + LOG_ERROR("Couldn't read Device ID register"); + return res; + } + const struct samd_family *family; + family = samd_find_family(id); + if (family == NULL) { + LOG_ERROR("Couldn't determine device family"); + return ERROR_FAIL; } + *mask = family->nvm_userrow_res_mask; + return ERROR_OK; +} - return false; +static int read_userrow(struct target *target, uint64_t *userrow) +{ + int res; + uint8_t buffer[8]; + + res = target_read_memory(target, SAMD_USER_ROW, 4, 2, buffer); + if (res != ERROR_OK) + return res; + + *userrow = target_buffer_get_u64(target, buffer); + return ERROR_OK; } -/* Modify the contents of the User Row in Flash. These are described in Table - * 9-3 of the SAMD20 datasheet. The User Row itself has a size of one page - * and contains a combination of "fuses" and calibration data in bits 24:17. - * We therefore try not to erase the row's contents unless we absolutely have - * to and we don't permit modifying reserved bits. */ -static int samd_modify_user_row(struct target *target, uint32_t value, - uint8_t startb, uint8_t endb) +/** + * Modify the contents of the User Row in Flash. The User Row itself + * has a size of one page and contains a combination of "fuses" and + * calibration data. Bits which have a value of zero in the mask will + * not be changed. Up to now devices only use the first 64 bits. + * @param target Pointer to the target structure. + * @param value_input The value to write. + * @param value_mask Bitmask, 0 -> value stays untouched. + * @return On success ERROR_OK, on failure an errorcode. + */ +static int samd_modify_user_row_masked(struct target *target, + uint64_t value_input, uint64_t value_mask) { int res; uint32_t nvm_ctrlb; bool manual_wp = true; - if (is_user_row_reserved_bit(startb) || is_user_row_reserved_bit(endb)) { - LOG_ERROR("Can't modify bits in the requested range"); - return ERROR_FAIL; - } - - /* Check if we need to do manual page write commands */ - res = target_read_u32(target, SAMD_NVMCTRL + SAMD_NVMCTRL_CTRLB, &nvm_ctrlb); - if (res == ERROR_OK) - manual_wp = (nvm_ctrlb & SAMD_NVM_CTRLB_MANW) != 0; - /* Retrieve the MCU's page size, in bytes. This is also the size of the * entire User Row. */ uint32_t page_size; @@ -557,44 +607,49 @@ static int samd_modify_user_row(struct target *target, uint32_t value, return res; } - /* Make sure the size is sane before we allocate. */ - assert(page_size > 0 && page_size <= SAMD_PAGE_SIZE_MAX); - - /* Make sure we're within the single page that comprises the User Row. */ - if (startb >= (page_size * 8) || endb >= (page_size * 8)) { - LOG_ERROR("Can't modify bits outside the User Row page range"); - return ERROR_FAIL; - } - - uint8_t *buf = malloc(page_size); - if (!buf) - return ERROR_FAIL; + /* Make sure the size is sane. */ + assert(page_size <= SAMD_PAGE_SIZE_MAX && + page_size >= sizeof(value_input)); + uint8_t buf[SAMD_PAGE_SIZE_MAX]; /* Read the user row (comprising one page) by words. */ res = target_read_memory(target, SAMD_USER_ROW, 4, page_size / 4, buf); if (res != ERROR_OK) - goto out_user_row; + return res; + + uint64_t value_device; + res = read_userrow(target, &value_device); + if (res != ERROR_OK) + return res; + uint64_t value_new = (value_input & value_mask) | (value_device & ~value_mask); /* We will need to erase before writing if the new value needs a '1' in any * position for which the current value had a '0'. Otherwise we can avoid * erasing. */ - uint32_t cur = buf_get_u32(buf, startb, endb - startb + 1); - if ((~cur) & value) { + if ((~value_device) & value_new) { res = samd_erase_row(target, SAMD_USER_ROW); if (res != ERROR_OK) { LOG_ERROR("Couldn't erase user row"); - goto out_user_row; + return res; } } /* Modify */ - buf_set_u32(buf, startb, endb - startb + 1, value); + target_buffer_set_u64(target, buf, value_new); /* Write the page buffer back out to the target. */ res = target_write_memory(target, SAMD_USER_ROW, 4, page_size / 4, buf); if (res != ERROR_OK) - goto out_user_row; + return res; + /* Check if we need to do manual page write commands */ + res = target_read_u32(target, SAMD_NVMCTRL + SAMD_NVMCTRL_CTRLB, &nvm_ctrlb); + if (res == ERROR_OK) + manual_wp = (nvm_ctrlb & SAMD_NVM_CTRLB_MANW) != 0; + else { + LOG_ERROR("Read of NVM register CTRKB failed."); + return ERROR_FAIL; + } if (manual_wp) { /* Trigger flash write */ res = samd_issue_nvmctrl_command(target, SAMD_NVM_CMD_WAP); @@ -602,12 +657,28 @@ static int samd_modify_user_row(struct target *target, uint32_t value, res = samd_check_error(target); } -out_user_row: - free(buf); - return res; } +/** + * Modifies the user row register to the given value. + * @param target Pointer to the target structure. + * @param value The value to write. + * @param startb The bit-offset by which the given value is shifted. + * @param endb The bit-offset of the last bit in value to write. + * @return On success ERROR_OK, on failure an errorcode. + */ +static int samd_modify_user_row(struct target *target, uint64_t value, + uint8_t startb, uint8_t endb) +{ + uint64_t mask = 0; + int i; + for (i = startb ; i <= endb ; i++) + mask |= ((uint64_t)1) << i; + + return samd_modify_user_row_masked(target, value << startb, mask); +} + static int samd_protect(struct flash_bank *bank, int set, int first_prot_bl, int last_prot_bl) { int res = ERROR_OK; @@ -644,7 +715,8 @@ static int samd_protect(struct flash_bank *bank, int set, int first_prot_bl, int * corresponding to Sector 15. A '1' means unlocked and a '0' means * locked. See Table 9-3 in the SAMD20 datasheet for more details. */ - res = samd_modify_user_row(bank->target, set ? 0x0000 : 0xFFFF, + res = samd_modify_user_row(bank->target, + set ? (uint64_t)0 : (uint64_t)UINT64_MAX, 48 + first_prot_bl, 48 + last_prot_bl); if (res != ERROR_OK) LOG_WARNING("SAMD: protect settings were not made persistent!"); @@ -945,6 +1017,83 @@ COMMAND_HANDLER(samd_handle_eeprom_command) return res; } +static COMMAND_HELPER(get_u64_from_hexarg, unsigned int num, uint64_t *value) +{ + if (num >= CMD_ARGC) { + command_print(CMD_CTX, "Too few Arguments."); + return ERROR_COMMAND_SYNTAX_ERROR; + } + + if (strlen(CMD_ARGV[num]) >= 3 && + CMD_ARGV[num][0] == '0' && + CMD_ARGV[num][1] == 'x') { + char *check = NULL; + *value = strtoull(&(CMD_ARGV[num][2]), &check, 16); + if ((value == 0 && errno == ERANGE) || + check == NULL || *check != 0) { + command_print(CMD_CTX, "Invalid 64-bit hex value in argument %d.", + num + 1); + return ERROR_COMMAND_SYNTAX_ERROR; + } + } else { + command_print(CMD_CTX, "Argument %d needs to be a hex value.", num + 1); + return ERROR_COMMAND_SYNTAX_ERROR; + } + return ERROR_OK; +} + +COMMAND_HANDLER(samd_handle_nvmuserrow_command) +{ + int res = ERROR_OK; + struct target *target = get_current_target(CMD_CTX); + + if (target) { + if (CMD_ARGC > 2) { + command_print(CMD_CTX, "Too much Arguments given."); + return ERROR_COMMAND_SYNTAX_ERROR; + } + + if (CMD_ARGC > 0) { + if (target->state != TARGET_HALTED) { + LOG_ERROR("Target not halted."); + return ERROR_TARGET_NOT_HALTED; + } + + uint64_t mask; + res = samd_get_reservedmask(target, &mask); + if (res != ERROR_OK) { + LOG_ERROR("Couldn't determine the mask for reserved bits."); + return ERROR_FAIL; + } + mask &= NVMUSERROW_LOCKBIT_MASK; + + uint64_t value; + res = CALL_COMMAND_HANDLER(get_u64_from_hexarg, 0, &value); + if (res != ERROR_OK) + return res; + if (CMD_ARGC == 2) { + uint64_t mask_temp; + res = CALL_COMMAND_HANDLER(get_u64_from_hexarg, 1, &mask_temp); + if (res != ERROR_OK) + return res; + mask &= mask_temp; + } + res = samd_modify_user_row_masked(target, value, mask); + if (res != ERROR_OK) + return res; + } + + /* read register */ + uint64_t value; + res = read_userrow(target, &value); + if (res == ERROR_OK) + command_print(CMD_CTX, "NVMUSERROW: 0x%016"PRIX64, value); + else + LOG_ERROR("NVMUSERROW could not be read."); + } + return res; +} + COMMAND_HANDLER(samd_handle_bootloader_command) { int res = ERROR_OK; @@ -1050,29 +1199,29 @@ static const struct command_registration at91samd_exec_command_handlers[] = { .name = "dsu_reset_deassert", .handler = samd_handle_reset_deassert, .mode = COMMAND_EXEC, - .help = "deasert internal reset held by DSU" + .help = "Deasert internal reset held by DSU." }, { .name = "info", .handler = samd_handle_info_command, .mode = COMMAND_EXEC, - .help = "Print information about the current at91samd chip" + .help = "Print information about the current at91samd chip " "and its flash configuration.", }, { .name = "chip-erase", .handler = samd_handle_chip_erase_command, .mode = COMMAND_EXEC, - .help = "Erase the entire Flash by using the Chip" + .help = "Erase the entire Flash by using the Chip-" "Erase feature in the Device Service Unit (DSU).", }, { .name = "set-security", .handler = samd_handle_set_security_command, .mode = COMMAND_EXEC, - .help = "Secure the chip's Flash by setting the Security Bit." - "This makes it impossible to read the Flash contents." - "The only way to undo this is to issue the chip-erase" + .help = "Secure the chip's Flash by setting the Security Bit. " + "This makes it impossible to read the Flash contents. " + "The only way to undo this is to issue the chip-erase " "command.", }, { @@ -1080,9 +1229,9 @@ static const struct command_registration at91samd_exec_command_handlers[] = { .usage = "[size_in_bytes]", .handler = samd_handle_eeprom_command, .mode = COMMAND_EXEC, - .help = "Show or set the EEPROM size setting, stored in the User Row." - "Please see Table 20-3 of the SAMD20 datasheet for allowed values." - "Changes are stored immediately but take affect after the MCU is" + .help = "Show or set the EEPROM size setting, stored in the User Row. " + "Please see Table 20-3 of the SAMD20 datasheet for allowed values. " + "Changes are stored immediately but take affect after the MCU is " "reset.", }, { @@ -1090,11 +1239,22 @@ static const struct command_registration at91samd_exec_command_handlers[] = { .usage = "[size_in_bytes]", .handler = samd_handle_bootloader_command, .mode = COMMAND_EXEC, - .help = "Show or set the bootloader size, stored in the User Row." - "Please see Table 20-2 of the SAMD20 datasheet for allowed values." - "Changes are stored immediately but take affect after the MCU is" + .help = "Show or set the bootloader size, stored in the User Row. " + "Please see Table 20-2 of the SAMD20 datasheet for allowed values. " + "Changes are stored immediately but take affect after the MCU is " "reset.", }, + { + .name = "nvmuserrow", + .usage = "[value] [mask]", + .handler = samd_handle_nvmuserrow_command, + .mode = COMMAND_EXEC, + .help = "Show or set the nvmuserrow register. It is 64 bit wide " + "and located at address 0x804000. Use the optional mask argument " + "to prevent changes at positions where the bitvalue is zero. " + "For security reasons the lock- and reserved-bits are masked out " + "in background and therefore cannot be changed.", + }, COMMAND_REGISTRATION_DONE }; -- 2.30.2