From b3d29cb5441ee5d38e8f7b561a58f03eb269dbe4 Mon Sep 17 00:00:00 2001 From: Matthias Welwarsky Date: Mon, 27 Feb 2017 17:10:19 +0100 Subject: [PATCH] aarch64: add 'maskisr' command Allow to configure ISR masking during single-step and add handling for stepping over WFI with ISR masked. Change-Id: I7918be7bcda6a1d9badac44fc36c59b52f662fef Signed-off-by: Matthias Welwarsky Reviewed-on: http://openocd.zylin.com/4023 Tested-by: jenkins Reviewed-by: Matthias Welwarsky --- doc/openocd.texi | 5 ++++ src/target/aarch64.c | 60 ++++++++++++++++++++++++++++++++++++++------ src/target/aarch64.h | 7 ++++++ 3 files changed, 64 insertions(+), 8 deletions(-) diff --git a/doc/openocd.texi b/doc/openocd.texi index 431f11cb2b..483b27b7f1 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -8418,6 +8418,11 @@ halting or resuming of all cores in the group. The command @code{target smp} def group. With SMP handling disabled, all targets need to be treated individually. @end deffn +@deffn Command {aarch64 maskisr} [@option{on}|@option{off}] +Selects whether interrupts will be processed when single stepping. The default configuration is +@option{on}. +@end deffn + @section Intel Architecture Intel Quark X10xx is the first product in the Quark family of SoCs. It is an IA-32 diff --git a/src/target/aarch64.c b/src/target/aarch64.c index b18a12a4c6..f1ce91459d 100644 --- a/src/target/aarch64.c +++ b/src/target/aarch64.c @@ -1049,6 +1049,7 @@ static int aarch64_step(struct target *target, int current, target_addr_t addres int handle_breakpoints) { struct armv8_common *armv8 = target_to_armv8(target); + struct aarch64_common *aarch64 = target_to_aarch64(target); int saved_retval = ERROR_OK; int retval; uint32_t edecr; @@ -1069,7 +1070,7 @@ static int aarch64_step(struct target *target, int current, target_addr_t addres armv8->debug_base + CPUV8_DBG_EDECR, (edecr|0x4)); } /* disable interrupts while stepping */ - if (retval == ERROR_OK) + if (retval == ERROR_OK && aarch64->isrmasking_mode == AARCH64_ISRMASK_ON) retval = aarch64_set_dscr_bits(target, 0x3 << 22, 0x3 << 22); /* bail out if stepping setup has failed */ if (retval != ERROR_OK) @@ -1113,7 +1114,7 @@ static int aarch64_step(struct target *target, int current, target_addr_t addres if (retval != ERROR_OK || stepped) break; - if (timeval_ms() > then + 1000) { + if (timeval_ms() > then + 100) { LOG_ERROR("timeout waiting for target %s halt after step", target_name(target)); retval = ERROR_TARGET_TIMEOUT; @@ -1121,8 +1122,14 @@ static int aarch64_step(struct target *target, int current, target_addr_t addres } } + /* + * At least on one SoC (Renesas R8A7795) stepping over a WFI instruction + * causes a timeout. The core takes the step but doesn't complete it and so + * debug state is never entered. However, you can manually halt the core + * as an external debug even is also a WFI wakeup event. + */ if (retval == ERROR_TARGET_TIMEOUT) - saved_retval = retval; + saved_retval = aarch64_halt_one(target, HALT_SYNC); /* restore EDECR */ retval = mem_ap_write_atomic_u32(armv8->debug_ap, @@ -1131,9 +1138,11 @@ static int aarch64_step(struct target *target, int current, target_addr_t addres return retval; /* restore interrupts */ - retval = aarch64_set_dscr_bits(target, 0x3 << 22, 0); - if (retval != ERROR_OK) - return ERROR_OK; + if (aarch64->isrmasking_mode == AARCH64_ISRMASK_ON) { + retval = aarch64_set_dscr_bits(target, 0x3 << 22, 0); + if (retval != ERROR_OK) + return ERROR_OK; + } if (saved_retval != ERROR_OK) return saved_retval; @@ -2303,9 +2312,9 @@ static int aarch64_examine_first(struct target *target) LOG_DEBUG("Configured %i hw breakpoints", aarch64->brp_num); - target->state = TARGET_RUNNING; + target->state = TARGET_UNKNOWN; target->debug_reason = DBG_REASON_NOTHALTED; - + aarch64->isrmasking_mode = AARCH64_ISRMASK_ON; target_set_examined(target); return ERROR_OK; } @@ -2443,6 +2452,34 @@ COMMAND_HANDLER(aarch64_handle_smp_on_command) return ERROR_OK; } +COMMAND_HANDLER(aarch64_mask_interrupts_command) +{ + struct target *target = get_current_target(CMD_CTX); + struct aarch64_common *aarch64 = target_to_aarch64(target); + + static const Jim_Nvp nvp_maskisr_modes[] = { + { .name = "off", .value = AARCH64_ISRMASK_OFF }, + { .name = "on", .value = AARCH64_ISRMASK_ON }, + { .name = NULL, .value = -1 }, + }; + const Jim_Nvp *n; + + if (CMD_ARGC > 0) { + n = Jim_Nvp_name2value_simple(nvp_maskisr_modes, CMD_ARGV[0]); + if (n->name == NULL) { + LOG_ERROR("Unknown parameter: %s - should be off or on", CMD_ARGV[0]); + return ERROR_COMMAND_SYNTAX_ERROR; + } + + aarch64->isrmasking_mode = n->value; + } + + n = Jim_Nvp_value2name_simple(nvp_maskisr_modes, aarch64->isrmasking_mode); + command_print(CMD_CTX, "aarch64 interrupt mask %s", n->name); + + return ERROR_OK; +} + static const struct command_registration aarch64_exec_command_handlers[] = { { .name = "cache_info", @@ -2471,6 +2508,13 @@ static const struct command_registration aarch64_exec_command_handlers[] = { .help = "Restart smp handling", .usage = "", }, + { + .name = "maskisr", + .handler = aarch64_mask_interrupts_command, + .mode = COMMAND_ANY, + .help = "mask aarch64 interrupts during single-step", + .usage = "['on'|'off']", + }, COMMAND_REGISTRATION_DONE }; diff --git a/src/target/aarch64.h b/src/target/aarch64.h index c9ec02dbbf..d7886a3d76 100644 --- a/src/target/aarch64.h +++ b/src/target/aarch64.h @@ -36,6 +36,11 @@ #define AARCH64_PADDRDBG_CPU_SHIFT 13 +enum aarch64_isrmasking_mode { + AARCH64_ISRMASK_OFF, + AARCH64_ISRMASK_ON, +}; + struct aarch64_brp { int used; int type; @@ -58,6 +63,8 @@ struct aarch64_common { struct aarch64_brp *brp_list; struct armv8_common armv8_common; + + enum aarch64_isrmasking_mode isrmasking_mode; }; static inline struct aarch64_common * -- 2.30.2