From 9f408db29db649a69cb635c03825cdce22803ace Mon Sep 17 00:00:00 2001 From: Jonathan Dumaresq Date: Wed, 5 Jan 2011 11:47:58 -0500 Subject: [PATCH] Add the contrib file for the armv7m arch Signed-off-by: Jonathan Dumaresq --- contrib/loaders/flash/armv7m_cfi_span_16.s | 79 ++++++++++++++++++++++ 1 file changed, 79 insertions(+) create mode 100644 contrib/loaders/flash/armv7m_cfi_span_16.s diff --git a/contrib/loaders/flash/armv7m_cfi_span_16.s b/contrib/loaders/flash/armv7m_cfi_span_16.s new file mode 100644 index 0000000000..7a9923f07f --- /dev/null +++ b/contrib/loaders/flash/armv7m_cfi_span_16.s @@ -0,0 +1,79 @@ +/*************************************************************************** + * Copyright (C) 2005, 2007 by Dominic Rath * + * Dominic.Rath@gmx.de * + * Copyright (C) 2010 Spencer Oliver * + * spen@spen-soft.co.uk * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the * + * Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + ***************************************************************************/ + + .text + .arm + .arch armv4 + + .section .init + +/* input parameters - */ +/* R0 = source address */ +/* R1 = destination address */ +/* R2 = number of writes */ +/* R3 = flash write command */ +/* R4 = constant to mask DQ7 bits (also used for Dq5 with shift) */ +/* output parameters - */ +/* R5 = 0x80 ok 0x00 bad */ +/* temp registers - */ +/* R6 = value read from flash to test status */ +/* R7 = holding register */ +/* unlock registers - */ +/* R8 = unlock1_addr */ +/* R9 = unlock1_cmd */ +/* R10 = unlock2_addr */ +/* R11 = unlock2_cmd */ + +code: + ldrh r5, [r0], #2 + strh r9, [r8] + strh r11, [r10] + strh r3, [r8] + strh r5, [r1] + nop +busy: + ldrh r6, [r1] + eor r7, r5, r6 + ands r7, r4, r7 + beq cont /* b if DQ7 == Data7 */ + ands r6, r6, r4, lsr #2 + beq busy /* b if DQ5 low */ + ldrh r6, [r1] + eor r7, r5, r6 + ands r7, r4, r7 + beq cont /* b if DQ7 == Data7 */ + mov r5, #0 /* 0x0 - return 0x00, error */ + bne done +cont: + subs r2, r2, #1 /* 0x1 */ + beq success + add r1, r1, #2 /* 0x2 */ + b code + +success: + mov r5, #128 /* 0x80 */ + b done + +done: + bkpt #0 + + .end -- 2.30.2