From 87a4158acf56863d4e5e70afc33791f631b6c693 Mon Sep 17 00:00:00 2001 From: Edward Fewell Date: Wed, 4 Mar 2020 17:24:33 -0600 Subject: [PATCH] drivers: xds110: Clean up command syntax and documentation Arrange all commands under a top level xds110 command. Fix documentation to properly reflect the current functionality. Also updated the links in the document to the new permanent links for the XDS110 only support. Patch updated for comments from code review. Return ERROR_COMMAND_SYNTAX_ERROR for wrong number of args in commands. Added deprecated commands to src/jtag/startup.tcl. Change-Id: Ica45f65e1fdf7fa72866f4e28c4f6bce428d8ac9 Signed-off-by: Edward Fewell Reviewed-on: http://openocd.zylin.com/5495 Tested-by: jenkins Reviewed-by: Antonio Borneo --- doc/openocd.texi | 28 +++++++++++++++++-------- src/jtag/drivers/xds110.c | 44 +++++++++++++++++---------------------- src/jtag/startup.tcl | 10 +++++++++ 3 files changed, 48 insertions(+), 34 deletions(-) diff --git a/doc/openocd.texi b/doc/openocd.texi index 25554f87a4..4665092d15 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -537,15 +537,25 @@ debuggers to ARM Cortex based targets @url{http://www.keil.com/support/man/docs/ @item @b{TI XDS110 Debug Probe} @* The XDS110 is included as the embedded debug probe on many Texas Instruments -LaunchPad evaluation boards. -@* The XDS110 is also available as a stand-alone USB debug probe. The XDS110 -stand-alone probe has the additional ability to supply voltage to the target -board via its AUX FUNCTIONS port. Use the -@command{xds110_supply_voltage } command to set the voltage. 0 turns -off the supply. Otherwise, the supply can be set to any value in the range 1800 -to 3600 millivolts. -@* Link: @url{http://processors.wiki.ti.com/index.php/XDS110} -@* Link: @url{http://processors.wiki.ti.com/index.php/XDS_Emulation_Software_Package#XDS110_Support_Utilities} +LaunchPad evaluation boards. The XDS110 is also available as a stand-alone USB +debug probe with the added capability to supply power to the target board. The +following commands are supported by the XDS110 driver: +@*@deffn {Config Command} {xds110 serial} serial_string +Specifies the serial number of which XDS110 probe to use. Otherwise, the first +XDS110 found will be used. +@end deffn +@*@deffn {Config Command} {xds110 supply} voltage_in_millivolts +Available only on the XDS110 stand-alone probe. Sets the voltage level of the +XDS110 power supply. A value of 0 leaves the supply off. Otherwise, the supply +can be set to any value in the range 1800 to 3600 millivolts. +@end deffn +@*@deffn {Command} {xds110 info} +Displays information about the connected XDS110 debug probe (e.g. firmware +version). +@end deffn +@* Further information can be found at the following sites: +@* Link: @url{https://software-dl.ti.com/ccs/esd/documents/xdsdebugprobes/emu_xds110.html} +@* Link: @url{https://software-dl.ti.com/ccs/esd/documents/xdsdebugprobes/emu_xds_software_package_download.html#xds110-support-utilities} @end itemize @section IBM PC Parallel Printer Port Based diff --git a/src/jtag/drivers/xds110.c b/src/jtag/drivers/xds110.c index 085d85f4c3..9ca200e79b 100644 --- a/src/jtag/drivers/xds110.c +++ b/src/jtag/drivers/xds110.c @@ -2028,11 +2028,8 @@ COMMAND_HANDLER(xds110_handle_serial_command) xds110.serial[i] = (char)serial[i]; xds110.serial[len] = 0; - } else { - LOG_ERROR("XDS110: expected exactly one argument to xds110_serial " - ""); - return ERROR_FAIL; - } + } else + return ERROR_COMMAND_SYNTAX_ERROR; return ERROR_OK; } @@ -2053,11 +2050,8 @@ COMMAND_HANDLER(xds110_handle_supply_voltage_command) return ERROR_FAIL; } xds110.voltage = voltage; - } else { - LOG_ERROR("XDS110: expected one argument to xds110_supply_voltage " - ""); - return ERROR_FAIL; - } + } else + return ERROR_COMMAND_SYNTAX_ERROR; return ERROR_OK; } @@ -2067,33 +2061,33 @@ static const struct command_registration xds110_subcommand_handlers[] = { .name = "info", .handler = &xds110_handle_info_command, .mode = COMMAND_EXEC, - .usage = "", .help = "show XDS110 info", - }, - COMMAND_REGISTRATION_DONE -}; - -static const struct command_registration xds110_command_handlers[] = { - { - .name = "xds110", - .mode = COMMAND_ANY, - .help = "perform XDS110 management", - .usage = "", - .chain = xds110_subcommand_handlers, + .usage = "", }, { - .name = "xds110_serial", + .name = "serial", .handler = &xds110_handle_serial_command, .mode = COMMAND_CONFIG, .help = "set the XDS110 probe serial number", .usage = "serial_string", }, { - .name = "xds110_supply_voltage", + .name = "supply", .handler = &xds110_handle_supply_voltage_command, .mode = COMMAND_CONFIG, .help = "set the XDS110 probe supply voltage", - .usage = "supply_voltage (millivolts)", + .usage = "voltage_in_millivolts", + }, + COMMAND_REGISTRATION_DONE +}; + +static const struct command_registration xds110_command_handlers[] = { + { + .name = "xds110", + .mode = COMMAND_ANY, + .help = "perform XDS110 management", + .usage = "", + .chain = xds110_subcommand_handlers, }, COMMAND_REGISTRATION_DONE }; diff --git a/src/jtag/startup.tcl b/src/jtag/startup.tcl index 8fc3ad5efb..f8c4ca0bf4 100644 --- a/src/jtag/startup.tcl +++ b/src/jtag/startup.tcl @@ -216,4 +216,14 @@ proc ftdi_location args { eval adapter usb location $args } +proc xds110_serial args { + echo "DEPRECATED! use 'xds110 serial' not 'xds110_serial'" + eval xds110 serial $args +} + +proc xds110_supply_voltage args { + echo "DEPRECATED! use 'xds110 supply' not 'xds110_supply_voltage'" + eval xds110 supply $args +} + # END MIGRATION AIDS -- 2.30.2