From 7e78c04f1c275176bdee8f9d2553300218164577 Mon Sep 17 00:00:00 2001 From: Alistair Francis Date: Wed, 13 May 2020 15:04:16 -0700 Subject: [PATCH] board: Add the HiFive1 revB board configuration Change-Id: If186afcfd2c87414b9323569a16aed9a6054c883 Signed-off-by: Alistair Francis Reviewed-on: http://openocd.zylin.com/5680 Tested-by: jenkins Reviewed-by: Antonio Borneo Reviewed-by: Tim Newsome --- tcl/board/sifive-hifive1-revb.cfg | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) create mode 100644 tcl/board/sifive-hifive1-revb.cfg diff --git a/tcl/board/sifive-hifive1-revb.cfg b/tcl/board/sifive-hifive1-revb.cfg new file mode 100644 index 0000000000..292f1027aa --- /dev/null +++ b/tcl/board/sifive-hifive1-revb.cfg @@ -0,0 +1,21 @@ +adapter speed 4000 + +adapter driver jlink +transport select jtag + +set _CHIPNAME riscv +jtag newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x20000913 + +set _TARGETNAME $_CHIPNAME.cpu +target create $_TARGETNAME.0 riscv -chain-position $_TARGETNAME +$_TARGETNAME.0 configure -work-area-phys 0x80000000 -work-area-size 0x4000 -work-area-backup 0 + +flash bank onboard_spi_flash fespi 0x20000000 0 0 0 $_TARGETNAME.0 + +init + +jlink jtag 3 + +halt +flash protect 0 1 last off +echo "Ready for Remote Connections" -- 2.30.2