From 6cb5ba6f1136df2986850f5c176cb38e34ca1795 Mon Sep 17 00:00:00 2001 From: Antonio Borneo Date: Wed, 3 Apr 2019 10:37:24 +0200 Subject: [PATCH] helper/command: change prototype of command_print/command_print_sameline To prepare for handling TCL return values consistently, all calls to command_print/command_print_sameline should switch to CMD as first parameter. Change prototype of command_print() and command_print_sameline() to pass CMD instead of CMD_CTX. Since the first parameter is currently not used, the change can be done though scripts without manual coding. This patch is created using the command: sed -i PATTERN $(find src/ doc/ -type f) with all the following patters: 's/\(command_print(cmd\)->ctx,/\1,/' 's/\(command_print(CMD\)_CTX,/\1,/' 's/\(command_print(struct command_\)context \*context,/\1invocation *cmd,/' 's/\(command_print_sameline(cmd\)->ctx,/\1,/' 's/\(command_print_sameline(CMD\)_CTX,/\1,/' 's/\(command_print_sameline(struct command_\)context \*context,/\1invocation *cmd,/' This change is inspired by http://openocd.zylin.com/1815 from Paul Fertser but is now done through scripting. Change-Id: I3386d8f96cdc477e7a2308dd18269de3bed04385 Signed-off-by: Antonio Borneo Signed-off-by: Paul Fertser Reviewed-on: http://openocd.zylin.com/5081 Tested-by: jenkins Reviewed-by: Tomas Vanek --- doc/manual/primer/commands.txt | 2 +- src/flash/mflash.c | 6 +- src/flash/nand/at91sam9.c | 10 +- src/flash/nand/core.c | 2 +- src/flash/nand/fileio.c | 10 +- src/flash/nand/lpc3180.c | 6 +- src/flash/nand/lpc32xx.c | 4 +- src/flash/nand/mxc.c | 6 +- src/flash/nand/tcl.c | 44 ++++---- src/flash/nor/ambiqmicro.c | 10 +- src/flash/nor/at91sam3.c | 26 ++--- src/flash/nor/at91sam4.c | 26 ++--- src/flash/nor/at91sam7.c | 4 +- src/flash/nor/at91samd.c | 30 +++--- src/flash/nor/atsame5.c | 12 +-- src/flash/nor/atsamv.c | 10 +- src/flash/nor/avrf.c | 4 +- src/flash/nor/efm32.c | 2 +- src/flash/nor/em357.c | 16 +-- src/flash/nor/esirisc_flash.c | 4 +- src/flash/nor/fm3.c | 4 +- src/flash/nor/kinetis.c | 26 ++--- src/flash/nor/lpc2000.c | 6 +- src/flash/nor/lpc2900.c | 16 +-- src/flash/nor/max32xxx.c | 28 ++--- src/flash/nor/niietcm4.c | 46 ++++---- src/flash/nor/numicro.c | 4 +- src/flash/nor/pic32mx.c | 12 +-- src/flash/nor/psoc4.c | 4 +- src/flash/nor/psoc5lp.c | 4 +- src/flash/nor/stellaris.c | 4 +- src/flash/nor/stm32f1x.c | 40 +++---- src/flash/nor/stm32f2x.c | 56 +++++----- src/flash/nor/stm32h7x.c | 18 ++-- src/flash/nor/stm32l4x.c | 20 ++-- src/flash/nor/stm32lx.c | 12 +-- src/flash/nor/str9xpec.c | 32 +++--- src/flash/nor/tcl.c | 56 +++++----- src/flash/nor/tms470.c | 14 +-- src/flash/nor/xmc4xxx.c | 6 +- src/hello.c | 2 +- src/helper/command.c | 4 +- src/helper/command.h | 10 +- src/helper/ioutil.c | 14 +-- src/helper/log.c | 2 +- src/jtag/adapter.c | 16 +-- src/jtag/aice/aice_interface.c | 6 +- src/jtag/aice/aice_transport.c | 8 +- src/jtag/drivers/amt_jtagaccel.c | 4 +- src/jtag/drivers/bcm2835gpio.c | 20 ++-- src/jtag/drivers/ft232r.c | 16 +-- src/jtag/drivers/ftdi.c | 2 +- src/jtag/drivers/gw16012.c | 2 +- src/jtag/drivers/imx_gpio.c | 20 ++-- src/jtag/drivers/jlink.c | 108 +++++++++---------- src/jtag/drivers/opendous.c | 2 +- src/jtag/drivers/parport.c | 4 +- src/jtag/drivers/sysfsgpio.c | 20 ++-- src/jtag/tcl.c | 24 ++--- src/pld/pld.c | 10 +- src/pld/virtex2.c | 6 +- src/server/gdb_server.c | 2 +- src/server/server.c | 6 +- src/svf/svf.c | 10 +- src/target/aarch64.c | 2 +- src/target/arm720t.c | 12 +-- src/target/arm7_9_common.c | 12 +-- src/target/arm920t.c | 30 +++--- src/target/arm926ejs.c | 2 +- src/target/arm946e.c | 18 ++-- src/target/arm966e.c | 12 +-- src/target/arm9tdmi.c | 6 +- src/target/arm_adi_v5.c | 70 ++++++------ src/target/arm_cti.c | 4 +- src/target/armv4_5.c | 24 ++--- src/target/armv4_5_cache.c | 8 +- src/target/armv7a.c | 10 +- src/target/armv7a_cache.c | 2 +- src/target/armv7a_cache_l2x.c | 6 +- src/target/armv8.c | 4 +- src/target/armv8_cache.c | 6 +- src/target/cortex_a.c | 4 +- src/target/cortex_m.c | 10 +- src/target/dsp563xx.c | 2 +- src/target/esirisc.c | 6 +- src/target/esirisc_trace.c | 106 +++++++++--------- src/target/etb.c | 14 +-- src/target/etm.c | 178 +++++++++++++++---------------- src/target/etm_dummy.c | 2 +- src/target/mips32.c | 18 ++-- src/target/mips_m4k.c | 18 ++-- src/target/nds32_cmd.c | 120 ++++++++++----------- src/target/oocd_trace.c | 20 ++-- src/target/openrisc/or1k.c | 4 +- src/target/riscv/riscv.c | 4 +- src/target/semihosting_common.c | 20 ++-- src/target/smp.c | 4 +- src/target/stm8.c | 4 +- src/target/target.c | 128 +++++++++++----------- src/target/target_request.c | 2 +- src/target/trace.c | 10 +- src/target/x86_32_common.c | 2 +- src/target/xscale.c | 46 ++++---- src/transport/transport.c | 4 +- src/xsvf/xsvf.c | 12 +-- 105 files changed, 963 insertions(+), 963 deletions(-) diff --git a/doc/manual/primer/commands.txt b/doc/manual/primer/commands.txt index a626f56b56..8ea228205b 100644 --- a/doc/manual/primer/commands.txt +++ b/doc/manual/primer/commands.txt @@ -16,7 +16,7 @@ COMMAND_HANDLER(handle_hello_command) const char *sep, *name; int retval = CALL_COMMAND_HANDLER(handle_hello_args); if (ERROR_OK == retval) - command_print(CMD_CTX, "Greetings%s%s!", sep, name); + command_print(CMD, "Greetings%s%s!", sep, name); return retval; } @endcode diff --git a/src/flash/mflash.c b/src/flash/mflash.c index 1ad7290fa5..acf1441b7e 100644 --- a/src/flash/mflash.c +++ b/src/flash/mflash.c @@ -423,7 +423,7 @@ COMMAND_HANDLER(mg_probe_cmd) ret = mg_mflash_probe(); if (ret == ERROR_OK) { - command_print(CMD_CTX, + command_print(CMD, "mflash (total %" PRIu32 " sectors) found at 0x%8.8" PRIx32 "", mflash_bank->drv_info->tot_sects, mflash_bank->base); @@ -799,7 +799,7 @@ COMMAND_HANDLER(mg_write_cmd) } if (duration_measure(&bench) == ERROR_OK) { - command_print(CMD_CTX, "wrote %zu bytes from file %s " + command_print(CMD, "wrote %zu bytes from file %s " "in %fs (%0.3f kB/s)", filesize, CMD_ARGV[1], duration_elapsed(&bench), duration_kbps(&bench, filesize)); } @@ -866,7 +866,7 @@ COMMAND_HANDLER(mg_dump_cmd) } if (duration_measure(&bench) == ERROR_OK) { - command_print(CMD_CTX, "dump image (address 0x%8.8" PRIx32 " " + command_print(CMD, "dump image (address 0x%8.8" PRIx32 " " "size %" PRIu32 ") to file %s in %fs (%0.3f kB/s)", address, size, CMD_ARGV[1], duration_elapsed(&bench), duration_kbps(&bench, size)); diff --git a/src/flash/nand/at91sam9.c b/src/flash/nand/at91sam9.c index 0af12b20c7..47c0505630 100644 --- a/src/flash/nand/at91sam9.c +++ b/src/flash/nand/at91sam9.c @@ -547,14 +547,14 @@ COMMAND_HANDLER(handle_at91sam9_cle_command) unsigned num, address_line; if (CMD_ARGC != 2) { - command_print(CMD_CTX, "incorrect number of arguments for 'at91sam9 cle' command"); + command_print(CMD, "incorrect number of arguments for 'at91sam9 cle' command"); return ERROR_OK; } COMMAND_PARSE_NUMBER(uint, CMD_ARGV[0], num); nand = get_nand_device_by_num(num); if (!nand) { - command_print(CMD_CTX, "invalid nand device number: %s", CMD_ARGV[0]); + command_print(CMD, "invalid nand device number: %s", CMD_ARGV[0]); return ERROR_OK; } @@ -582,7 +582,7 @@ COMMAND_HANDLER(handle_at91sam9_ale_command) COMMAND_PARSE_NUMBER(uint, CMD_ARGV[0], num); nand = get_nand_device_by_num(num); if (!nand) { - command_print(CMD_CTX, "invalid nand device number: %s", CMD_ARGV[0]); + command_print(CMD, "invalid nand device number: %s", CMD_ARGV[0]); return ERROR_COMMAND_ARGUMENT_INVALID; } @@ -610,7 +610,7 @@ COMMAND_HANDLER(handle_at91sam9_rdy_busy_command) COMMAND_PARSE_NUMBER(uint, CMD_ARGV[0], num); nand = get_nand_device_by_num(num); if (!nand) { - command_print(CMD_CTX, "invalid nand device number: %s", CMD_ARGV[0]); + command_print(CMD, "invalid nand device number: %s", CMD_ARGV[0]); return ERROR_COMMAND_ARGUMENT_INVALID; } @@ -641,7 +641,7 @@ COMMAND_HANDLER(handle_at91sam9_ce_command) COMMAND_PARSE_NUMBER(uint, CMD_ARGV[0], num); nand = get_nand_device_by_num(num); if (!nand) { - command_print(CMD_CTX, "invalid nand device number: %s", CMD_ARGV[0]); + command_print(CMD, "invalid nand device number: %s", CMD_ARGV[0]); return ERROR_COMMAND_ARGUMENT_INVALID; } diff --git a/src/flash/nand/core.c b/src/flash/nand/core.c index 7428d2253a..b9ac793f23 100644 --- a/src/flash/nand/core.c +++ b/src/flash/nand/core.c @@ -217,7 +217,7 @@ COMMAND_HELPER(nand_command_get_device, unsigned name_index, COMMAND_PARSE_NUMBER(uint, str, num); *nand = get_nand_device_by_num(num); if (!*nand) { - command_print(CMD_CTX, "NAND flash device '%s' not found", str); + command_print(CMD, "NAND flash device '%s' not found", str); return ERROR_COMMAND_SYNTAX_ERROR; } return ERROR_OK; diff --git a/src/flash/nand/fileio.c b/src/flash/nand/fileio.c index 76f6e104a4..f65f957bf2 100644 --- a/src/flash/nand/fileio.c +++ b/src/flash/nand/fileio.c @@ -59,7 +59,7 @@ int nand_fileio_start(struct command_invocation *cmd, struct nand_fileio_state *state) { if (state->address % nand->page_size) { - command_print(cmd->ctx, "only page-aligned addresses are supported"); + command_print(cmd, "only page-aligned addresses are supported"); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -69,7 +69,7 @@ int nand_fileio_start(struct command_invocation *cmd, int retval = fileio_open(&state->fileio, filename, filemode, FILEIO_BINARY); if (ERROR_OK != retval) { const char *msg = (FILEIO_READ == filemode) ? "read" : "write"; - command_print(cmd->ctx, "failed to open '%s' for %s access", + command_print(cmd, "failed to open '%s' for %s access", filename, msg); return retval; } @@ -131,7 +131,7 @@ COMMAND_HELPER(nand_fileio_parse_args, struct nand_fileio_state *state, return retval; if (NULL == nand->device) { - command_print(CMD_CTX, "#%s: not probed", CMD_ARGV[0]); + command_print(CMD, "#%s: not probed", CMD_ARGV[0]); return ERROR_NAND_DEVICE_NOT_PROBED; } @@ -139,7 +139,7 @@ COMMAND_HELPER(nand_fileio_parse_args, struct nand_fileio_state *state, if (need_size) { COMMAND_PARSE_NUMBER(u32, CMD_ARGV[3], state->size); if (state->size % nand->page_size) { - command_print(CMD_CTX, "only page-aligned sizes are supported"); + command_print(CMD, "only page-aligned sizes are supported"); return ERROR_COMMAND_SYNTAX_ERROR; } } @@ -155,7 +155,7 @@ COMMAND_HELPER(nand_fileio_parse_args, struct nand_fileio_state *state, else if (sw_ecc && !strcmp(CMD_ARGV[i], "oob_softecc_kw")) state->oob_format |= NAND_OOB_SW_ECC_KW; else { - command_print(CMD_CTX, "unknown option: %s", CMD_ARGV[i]); + command_print(CMD, "unknown option: %s", CMD_ARGV[i]); return ERROR_COMMAND_SYNTAX_ERROR; } } diff --git a/src/flash/nand/lpc3180.c b/src/flash/nand/lpc3180.c index d15fdce384..436580e373 100644 --- a/src/flash/nand/lpc3180.c +++ b/src/flash/nand/lpc3180.c @@ -1290,7 +1290,7 @@ COMMAND_HANDLER(handle_lpc3180_select_command) COMMAND_PARSE_NUMBER(uint, CMD_ARGV[0], num); struct nand_device *nand = get_nand_device_by_num(num); if (!nand) { - command_print(CMD_CTX, "nand device '#%s' is out of bounds", CMD_ARGV[0]); + command_print(CMD, "nand device '#%s' is out of bounds", CMD_ARGV[0]); return ERROR_OK; } @@ -1310,10 +1310,10 @@ COMMAND_HANDLER(handle_lpc3180_select_command) } if (lpc3180_info->selected_controller == LPC3180_MLC_CONTROLLER) - command_print(CMD_CTX, "%s controller selected", + command_print(CMD, "%s controller selected", selected[lpc3180_info->selected_controller]); else - command_print(CMD_CTX, + command_print(CMD, lpc3180_info->is_bulk ? "%s controller selected bulk mode is available" : "%s controller selected bulk mode is not available", selected[lpc3180_info->selected_controller]); diff --git a/src/flash/nand/lpc32xx.c b/src/flash/nand/lpc32xx.c index 1ed16dfd0f..6febe16a1b 100644 --- a/src/flash/nand/lpc32xx.c +++ b/src/flash/nand/lpc32xx.c @@ -1760,7 +1760,7 @@ COMMAND_HANDLER(handle_lpc32xx_select_command) COMMAND_PARSE_NUMBER(uint, CMD_ARGV[0], num); struct nand_device *nand = get_nand_device_by_num(num); if (!nand) { - command_print(CMD_CTX, "nand device '#%s' is out of bounds", + command_print(CMD, "nand device '#%s' is out of bounds", CMD_ARGV[0]); return ERROR_OK; } @@ -1778,7 +1778,7 @@ COMMAND_HANDLER(handle_lpc32xx_select_command) return ERROR_COMMAND_SYNTAX_ERROR; } - command_print(CMD_CTX, "%s controller selected", + command_print(CMD, "%s controller selected", selected[lpc32xx_info->selected_controller]); return ERROR_OK; diff --git a/src/flash/nand/mxc.c b/src/flash/nand/mxc.c index 6069c62685..b54115731b 100644 --- a/src/flash/nand/mxc.c +++ b/src/flash/nand/mxc.c @@ -157,7 +157,7 @@ COMMAND_HANDLER(handle_mxc_biswap_command) int retval = CALL_COMMAND_HANDLER(nand_command_get_device, 0, &nand); if (retval != ERROR_OK) { - command_print(CMD_CTX, "invalid nand device number or name: %s", CMD_ARGV[0]); + command_print(CMD, "invalid nand device number or name: %s", CMD_ARGV[0]); return ERROR_COMMAND_ARGUMENT_INVALID; } @@ -169,9 +169,9 @@ COMMAND_HANDLER(handle_mxc_biswap_command) mxc_nf_info->flags.biswap_enabled = false; } if (mxc_nf_info->flags.biswap_enabled) - command_print(CMD_CTX, "BI-swapping enabled on %s", nand->name); + command_print(CMD, "BI-swapping enabled on %s", nand->name); else - command_print(CMD_CTX, "BI-swapping disabled on %s", nand->name); + command_print(CMD, "BI-swapping disabled on %s", nand->name); return ERROR_OK; } diff --git a/src/flash/nand/tcl.c b/src/flash/nand/tcl.c index 8a7022aebb..5480e0d61e 100644 --- a/src/flash/nand/tcl.c +++ b/src/flash/nand/tcl.c @@ -37,20 +37,20 @@ COMMAND_HANDLER(handle_nand_list_command) int i; if (!nand_devices) { - command_print(CMD_CTX, "no NAND flash devices configured"); + command_print(CMD, "no NAND flash devices configured"); return ERROR_OK; } for (p = nand_devices, i = 0; p; p = p->next, i++) { if (p->device) - command_print(CMD_CTX, "#%i: %s (%s) " + command_print(CMD, "#%i: %s (%s) " "pagesize: %i, buswidth: %i,\n\t" "blocksize: %i, blocks: %i", i, p->device->name, p->manufacturer->name, p->page_size, p->bus_width, p->erase_size, p->num_blocks); else - command_print(CMD_CTX, "#%i: not probed", i); + command_print(CMD, "#%i: not probed", i); } return ERROR_OK; @@ -87,7 +87,7 @@ COMMAND_HANDLER(handle_nand_info_command) return retval; if (NULL == p->device) { - command_print(CMD_CTX, "#%s: not probed", CMD_ARGV[0]); + command_print(CMD, "#%s: not probed", CMD_ARGV[0]); return ERROR_OK; } @@ -97,7 +97,7 @@ COMMAND_HANDLER(handle_nand_info_command) if (last >= p->num_blocks) last = p->num_blocks - 1; - command_print(CMD_CTX, + command_print(CMD, "#%i: %s (%s) pagesize: %i, buswidth: %i, erasesize: %i", i++, p->device->name, @@ -123,7 +123,7 @@ COMMAND_HANDLER(handle_nand_info_command) else bad_state = " (block condition unknown)"; - command_print(CMD_CTX, + command_print(CMD, "\t#%i: 0x%8.8" PRIx32 " (%" PRId32 "kB) %s%s", j, p->blocks[j].offset, @@ -147,7 +147,7 @@ COMMAND_HANDLER(handle_nand_probe_command) retval = nand_probe(p); if (retval == ERROR_OK) { - command_print(CMD_CTX, "NAND flash device '%s (%s)' found", + command_print(CMD, "NAND flash device '%s (%s)' found", p->device->name, p->manufacturer->name); } @@ -189,7 +189,7 @@ COMMAND_HANDLER(handle_nand_erase_command) retval = nand_erase(p, offset, offset + length - 1); if (retval == ERROR_OK) { - command_print(CMD_CTX, "erased blocks %lu to %lu " + command_print(CMD, "erased blocks %lu to %lu " "on NAND flash device #%s '%s'", offset, offset + length - 1, CMD_ARGV[0], p->device->name); @@ -233,7 +233,7 @@ COMMAND_HANDLER(handle_nand_check_bad_blocks_command) retval = nand_build_bbt(p, first, last); if (retval == ERROR_OK) { - command_print(CMD_CTX, "checked NAND flash device for bad blocks, " + command_print(CMD, "checked NAND flash device for bad blocks, " "use \"nand info\" command to list blocks"); } @@ -253,7 +253,7 @@ COMMAND_HANDLER(handle_nand_write_command) while (s.size > 0) { int bytes_read = nand_fileio_read(nand, &s); if (bytes_read <= 0) { - command_print(CMD_CTX, "error while reading file"); + command_print(CMD, "error while reading file"); nand_fileio_cleanup(&s); return ERROR_FAIL; } @@ -262,7 +262,7 @@ COMMAND_HANDLER(handle_nand_write_command) retval = nand_write_page(nand, s.address / nand->page_size, s.page, s.page_size, s.oob, s.oob_size); if (ERROR_OK != retval) { - command_print(CMD_CTX, "failed writing file %s " + command_print(CMD, "failed writing file %s " "to NAND flash %s at offset 0x%8.8" PRIx32, CMD_ARGV[1], CMD_ARGV[0], s.address); nand_fileio_cleanup(&s); @@ -272,7 +272,7 @@ COMMAND_HANDLER(handle_nand_write_command) } if (nand_fileio_finish(&s) == ERROR_OK) { - command_print(CMD_CTX, "wrote file %s to NAND flash %s up to " + command_print(CMD, "wrote file %s to NAND flash %s up to " "offset 0x%8.8" PRIx32 " in %fs (%0.3f KiB/s)", CMD_ARGV[1], CMD_ARGV[0], s.address, duration_elapsed(&s.bench), duration_kbps(&s.bench, total_bytes)); @@ -302,7 +302,7 @@ COMMAND_HANDLER(handle_nand_verify_command) retval = nand_read_page(nand, dev.address / dev.page_size, dev.page, dev.page_size, dev.oob, dev.oob_size); if (ERROR_OK != retval) { - command_print(CMD_CTX, "reading NAND flash page failed"); + command_print(CMD, "reading NAND flash page failed"); nand_fileio_cleanup(&dev); nand_fileio_cleanup(&file); return retval; @@ -310,7 +310,7 @@ COMMAND_HANDLER(handle_nand_verify_command) int bytes_read = nand_fileio_read(nand, &file); if (bytes_read <= 0) { - command_print(CMD_CTX, "error while reading file"); + command_print(CMD, "error while reading file"); nand_fileio_cleanup(&dev); nand_fileio_cleanup(&file); return ERROR_FAIL; @@ -318,7 +318,7 @@ COMMAND_HANDLER(handle_nand_verify_command) if ((dev.page && memcmp(dev.page, file.page, dev.page_size)) || (dev.oob && memcmp(dev.oob, file.oob, dev.oob_size))) { - command_print(CMD_CTX, "NAND flash contents differ " + command_print(CMD, "NAND flash contents differ " "at 0x%8.8" PRIx32, dev.address); nand_fileio_cleanup(&dev); nand_fileio_cleanup(&file); @@ -330,7 +330,7 @@ COMMAND_HANDLER(handle_nand_verify_command) } if (nand_fileio_finish(&file) == ERROR_OK) { - command_print(CMD_CTX, "verified file %s in NAND flash %s " + command_print(CMD, "verified file %s in NAND flash %s " "up to offset 0x%8.8" PRIx32 " in %fs (%0.3f KiB/s)", CMD_ARGV[1], CMD_ARGV[0], dev.address, duration_elapsed(&file.bench), duration_kbps(&file.bench, dev.size)); @@ -354,7 +354,7 @@ COMMAND_HANDLER(handle_nand_dump_command) retval = nand_read_page(nand, s.address / nand->page_size, s.page, s.page_size, s.oob, s.oob_size); if (ERROR_OK != retval) { - command_print(CMD_CTX, "reading NAND flash page failed"); + command_print(CMD, "reading NAND flash page failed"); nand_fileio_cleanup(&s); return retval; } @@ -374,7 +374,7 @@ COMMAND_HANDLER(handle_nand_dump_command) return retval; if (nand_fileio_finish(&s) == ERROR_OK) { - command_print(CMD_CTX, "dumped %zu bytes in %fs (%0.3f KiB/s)", + command_print(CMD, "dumped %zu bytes in %fs (%0.3f KiB/s)", filesize, duration_elapsed(&s.bench), duration_kbps(&s.bench, filesize)); } @@ -392,7 +392,7 @@ COMMAND_HANDLER(handle_nand_raw_access_command) return retval; if (NULL == p->device) { - command_print(CMD_CTX, "#%s: not probed", CMD_ARGV[0]); + command_print(CMD, "#%s: not probed", CMD_ARGV[0]); return ERROR_OK; } @@ -400,7 +400,7 @@ COMMAND_HANDLER(handle_nand_raw_access_command) COMMAND_PARSE_ENABLE(CMD_ARGV[1], p->use_raw); const char *msg = p->use_raw ? "enabled" : "disabled"; - command_print(CMD_CTX, "raw access is %s", msg); + command_print(CMD, "raw access is %s", msg); return ERROR_OK; } @@ -502,13 +502,13 @@ COMMAND_HANDLER(handle_nand_init_command) static int nand_list_walker(struct nand_flash_controller *c, void *x) { struct command_invocation *cmd = x; - command_print(cmd->ctx, " %s", c->name); + command_print(cmd, " %s", c->name); return ERROR_OK; } COMMAND_HANDLER(handle_nand_list_drivers) { - command_print(CMD_CTX, "Available NAND flash controller drivers:"); + command_print(CMD, "Available NAND flash controller drivers:"); return nand_driver_walk(&nand_list_walker, CMD); } diff --git a/src/flash/nor/ambiqmicro.c b/src/flash/nor/ambiqmicro.c index a536d54562..b1e3e72a95 100644 --- a/src/flash/nor/ambiqmicro.c +++ b/src/flash/nor/ambiqmicro.c @@ -791,9 +791,9 @@ COMMAND_HANDLER(ambiqmicro_handle_mass_erase_command) for (i = 0; i < bank->num_sectors; i++) bank->sectors[i].is_erased = 1; - command_print(CMD_CTX, "ambiqmicro mass erase complete"); + command_print(CMD, "ambiqmicro mass erase complete"); } else - command_print(CMD_CTX, "ambiqmicro mass erase failed"); + command_print(CMD, "ambiqmicro mass erase failed"); return ERROR_OK; } @@ -815,9 +815,9 @@ COMMAND_HANDLER(ambiqmicro_handle_page_erase_command) return retval; if (ambiqmicro_erase(bank, first, last) == ERROR_OK) - command_print(CMD_CTX, "ambiqmicro page erase complete"); + command_print(CMD, "ambiqmicro page erase complete"); else - command_print(CMD_CTX, "ambiqmicro page erase failed"); + command_print(CMD, "ambiqmicro page erase failed"); return ERROR_OK; } @@ -838,7 +838,7 @@ COMMAND_HANDLER(ambiqmicro_handle_program_otp_command) COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], offset); COMMAND_PARSE_NUMBER(u32, CMD_ARGV[2], count); - command_print(CMD_CTX, "offset=0x%08x count=%d", offset, count); + command_print(CMD, "offset=0x%08x count=%d", offset, count); CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank); diff --git a/src/flash/nor/at91sam3.c b/src/flash/nor/at91sam3.c index 616c3fe9d7..2457c15f36 100644 --- a/src/flash/nor/at91sam3.c +++ b/src/flash/nor/at91sam3.c @@ -256,7 +256,7 @@ static struct sam3_chip *get_current_sam3(struct command_invocation *cmd) t = get_current_target(cmd->ctx); if (!t) { - command_print(cmd->ctx, "No current target?"); + command_print(cmd, "No current target?"); return NULL; } @@ -264,7 +264,7 @@ static struct sam3_chip *get_current_sam3(struct command_invocation *cmd) if (!p) { /* this should not happen */ /* the command is not registered until the chip is created? */ - command_print(cmd->ctx, "No SAM3 chips exist?"); + command_print(cmd, "No SAM3 chips exist?"); return NULL; } @@ -273,7 +273,7 @@ static struct sam3_chip *get_current_sam3(struct command_invocation *cmd) return p; p = p->next; } - command_print(cmd->ctx, "Cannot find SAM3 chip?"); + command_print(cmd, "Cannot find SAM3 chip?"); return NULL; } @@ -3549,7 +3549,7 @@ COMMAND_HANDLER(sam3_handle_info_command) if (pChip->details.bank[0].pBank == NULL) { x = 0; need_define: - command_print(CMD_CTX, + command_print(CMD, "Please define bank %d via command: flash bank %s ... ", x, at91sam3_flash.name); @@ -3608,7 +3608,7 @@ COMMAND_HANDLER(sam3_handle_gpnvm_command) } if (pChip->details.bank[0].pBank == NULL) { - command_print(CMD_CTX, "Bank0 must be defined first via: flash bank %s ...", + command_print(CMD, "Bank0 must be defined first via: flash bank %s ...", at91sam3_flash.name); return ERROR_FAIL; } @@ -3647,22 +3647,22 @@ showall: r = FLASHD_GetGPNVM(&(pChip->details.bank[0]), x, &v); if (r != ERROR_OK) break; - command_print(CMD_CTX, "sam3-gpnvm%u: %u", x, v); + command_print(CMD, "sam3-gpnvm%u: %u", x, v); } return r; } if ((who >= 0) && (((unsigned)(who)) < pChip->details.n_gpnvms)) { r = FLASHD_GetGPNVM(&(pChip->details.bank[0]), who, &v); - command_print(CMD_CTX, "sam3-gpnvm%u: %u", who, v); + command_print(CMD, "sam3-gpnvm%u: %u", who, v); return r; } else { - command_print(CMD_CTX, "sam3-gpnvm invalid GPNVM: %u", who); + command_print(CMD, "sam3-gpnvm invalid GPNVM: %u", who); return ERROR_COMMAND_SYNTAX_ERROR; } } if (who == -1) { - command_print(CMD_CTX, "Missing GPNVM number"); + command_print(CMD, "Missing GPNVM number"); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -3672,7 +3672,7 @@ showall: (0 == strcmp("clear", CMD_ARGV[0]))) /* quietly accept both */ r = FLASHD_ClrGPNVM(&(pChip->details.bank[0]), who); else { - command_print(CMD_CTX, "Unknown command: %s", CMD_ARGV[0]); + command_print(CMD, "Unknown command: %s", CMD_ARGV[0]); r = ERROR_COMMAND_SYNTAX_ERROR; } return r; @@ -3697,7 +3697,7 @@ COMMAND_HANDLER(sam3_handle_slowclk_command) COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], v); if (v > 200000) { /* absurd slow clock of 200Khz? */ - command_print(CMD_CTX, "Absurd/illegal slow clock freq: %d\n", (int)(v)); + command_print(CMD, "Absurd/illegal slow clock freq: %d\n", (int)(v)); return ERROR_COMMAND_SYNTAX_ERROR; } pChip->cfg.slow_freq = v; @@ -3705,11 +3705,11 @@ COMMAND_HANDLER(sam3_handle_slowclk_command) } default: /* error */ - command_print(CMD_CTX, "Too many parameters"); + command_print(CMD, "Too many parameters"); return ERROR_COMMAND_SYNTAX_ERROR; break; } - command_print(CMD_CTX, "Slowclk freq: %d.%03dkhz", + command_print(CMD, "Slowclk freq: %d.%03dkhz", (int)(pChip->cfg.slow_freq / 1000), (int)(pChip->cfg.slow_freq % 1000)); return ERROR_OK; diff --git a/src/flash/nor/at91sam4.c b/src/flash/nor/at91sam4.c index 719da2bb2d..621754c90e 100644 --- a/src/flash/nor/at91sam4.c +++ b/src/flash/nor/at91sam4.c @@ -235,7 +235,7 @@ static struct sam4_chip *get_current_sam4(struct command_invocation *cmd) t = get_current_target(cmd->ctx); if (!t) { - command_print(cmd->ctx, "No current target?"); + command_print(cmd, "No current target?"); return NULL; } @@ -243,7 +243,7 @@ static struct sam4_chip *get_current_sam4(struct command_invocation *cmd) if (!p) { /* this should not happen */ /* the command is not registered until the chip is created? */ - command_print(cmd->ctx, "No SAM4 chips exist?"); + command_print(cmd, "No SAM4 chips exist?"); return NULL; } @@ -252,7 +252,7 @@ static struct sam4_chip *get_current_sam4(struct command_invocation *cmd) return p; p = p->next; } - command_print(cmd->ctx, "Cannot find SAM4 chip?"); + command_print(cmd, "Cannot find SAM4 chip?"); return NULL; } @@ -3029,7 +3029,7 @@ COMMAND_HANDLER(sam4_handle_info_command) if (pChip->details.bank[0].pBank == NULL) { x = 0; need_define: - command_print(CMD_CTX, + command_print(CMD, "Please define bank %d via command: flash bank %s ... ", x, at91sam4_flash.name); @@ -3088,7 +3088,7 @@ COMMAND_HANDLER(sam4_handle_gpnvm_command) } if (pChip->details.bank[0].pBank == NULL) { - command_print(CMD_CTX, "Bank0 must be defined first via: flash bank %s ...", + command_print(CMD, "Bank0 must be defined first via: flash bank %s ...", at91sam4_flash.name); return ERROR_FAIL; } @@ -3127,23 +3127,23 @@ showall: r = FLASHD_GetGPNVM(&(pChip->details.bank[0]), x, &v); if (r != ERROR_OK) break; - command_print(CMD_CTX, "sam4-gpnvm%u: %u", x, v); + command_print(CMD, "sam4-gpnvm%u: %u", x, v); } return r; } if ((who >= 0) && (((unsigned)(who)) < pChip->details.n_gpnvms)) { r = FLASHD_GetGPNVM(&(pChip->details.bank[0]), who, &v); if (r == ERROR_OK) - command_print(CMD_CTX, "sam4-gpnvm%u: %u", who, v); + command_print(CMD, "sam4-gpnvm%u: %u", who, v); return r; } else { - command_print(CMD_CTX, "sam4-gpnvm invalid GPNVM: %u", who); + command_print(CMD, "sam4-gpnvm invalid GPNVM: %u", who); return ERROR_COMMAND_SYNTAX_ERROR; } } if (who == -1) { - command_print(CMD_CTX, "Missing GPNVM number"); + command_print(CMD, "Missing GPNVM number"); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -3153,7 +3153,7 @@ showall: (0 == strcmp("clear", CMD_ARGV[0]))) /* quietly accept both */ r = FLASHD_ClrGPNVM(&(pChip->details.bank[0]), who); else { - command_print(CMD_CTX, "Unknown command: %s", CMD_ARGV[0]); + command_print(CMD, "Unknown command: %s", CMD_ARGV[0]); r = ERROR_COMMAND_SYNTAX_ERROR; } return r; @@ -3178,7 +3178,7 @@ COMMAND_HANDLER(sam4_handle_slowclk_command) COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], v); if (v > 200000) { /* absurd slow clock of 200Khz? */ - command_print(CMD_CTX, "Absurd/illegal slow clock freq: %d\n", (int)(v)); + command_print(CMD, "Absurd/illegal slow clock freq: %d\n", (int)(v)); return ERROR_COMMAND_SYNTAX_ERROR; } pChip->cfg.slow_freq = v; @@ -3186,11 +3186,11 @@ COMMAND_HANDLER(sam4_handle_slowclk_command) } default: /* error */ - command_print(CMD_CTX, "Too many parameters"); + command_print(CMD, "Too many parameters"); return ERROR_COMMAND_SYNTAX_ERROR; break; } - command_print(CMD_CTX, "Slowclk freq: %d.%03dkhz", + command_print(CMD, "Slowclk freq: %d.%03dkhz", (int)(pChip->cfg.slow_freq / 1000), (int)(pChip->cfg.slow_freq % 1000)); return ERROR_OK; diff --git a/src/flash/nor/at91sam7.c b/src/flash/nor/at91sam7.c index 15b93a29f4..232260b93f 100644 --- a/src/flash/nor/at91sam7.c +++ b/src/flash/nor/at91sam7.c @@ -1067,7 +1067,7 @@ COMMAND_HANDLER(at91sam7_handle_gpnvm_command) if (bank == NULL) return ERROR_FLASH_BANK_INVALID; if (strcmp(bank->driver->name, "at91sam7")) { - command_print(CMD_CTX, "not an at91sam7 flash bank '%s'", CMD_ARGV[0]); + command_print(CMD, "not an at91sam7 flash bank '%s'", CMD_ARGV[0]); return ERROR_FLASH_BANK_INVALID; } if (bank->target->state != TARGET_HALTED) { @@ -1091,7 +1091,7 @@ COMMAND_HANDLER(at91sam7_handle_gpnvm_command) COMMAND_PARSE_NUMBER(int, CMD_ARGV[0], bit); if ((bit < 0) || (bit >= at91sam7_info->num_nvmbits)) { - command_print(CMD_CTX, + command_print(CMD, "gpnvm bit '#%s' is out of bounds for target %s", CMD_ARGV[0], at91sam7_info->target_name); diff --git a/src/flash/nor/at91samd.c b/src/flash/nor/at91samd.c index c325194ede..b6cff9a672 100644 --- a/src/flash/nor/at91samd.c +++ b/src/flash/nor/at91samd.c @@ -947,9 +947,9 @@ COMMAND_HANDLER(samd_handle_chip_erase_command) * perform the erase. */ res = target_write_u8(target, SAMD_DSU + SAMD_DSU_CTRL_EXT, (1<<4)); if (res == ERROR_OK) - command_print(CMD_CTX, "chip erase started"); + command_print(CMD, "chip erase started"); else - command_print(CMD_CTX, "write to DSU CTRL failed"); + command_print(CMD, "write to DSU CTRL failed"); } return res; @@ -961,7 +961,7 @@ COMMAND_HANDLER(samd_handle_set_security_command) struct target *target = get_current_target(CMD_CTX); if (CMD_ARGC < 1 || (CMD_ARGC >= 1 && (strcmp(CMD_ARGV[0], "enable")))) { - command_print(CMD_CTX, "supply the \"enable\" argument to proceed."); + command_print(CMD, "supply the \"enable\" argument to proceed."); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -975,9 +975,9 @@ COMMAND_HANDLER(samd_handle_set_security_command) /* Check (and clear) error conditions */ if (res == ERROR_OK) - command_print(CMD_CTX, "chip secured on next power-cycle"); + command_print(CMD, "chip secured on next power-cycle"); else - command_print(CMD_CTX, "failed to secure chip"); + command_print(CMD, "failed to secure chip"); } return res; @@ -1008,7 +1008,7 @@ COMMAND_HANDLER(samd_handle_eeprom_command) } if (code > 6) { - command_print(CMD_CTX, "Invalid EEPROM size. Please see " + command_print(CMD, "Invalid EEPROM size. Please see " "datasheet for a list valid sizes."); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -1022,10 +1022,10 @@ COMMAND_HANDLER(samd_handle_eeprom_command) uint32_t size = ((val >> 4) & 0x7); /* grab size code */ if (size == 0x7) - command_print(CMD_CTX, "EEPROM is disabled"); + command_print(CMD, "EEPROM is disabled"); else { /* Otherwise, 6 is 256B, 0 is 16KB */ - command_print(CMD_CTX, "EEPROM size is %u bytes", + command_print(CMD, "EEPROM size is %u bytes", (2 << (13 - size))); } } @@ -1038,7 +1038,7 @@ COMMAND_HANDLER(samd_handle_eeprom_command) static COMMAND_HELPER(get_u64_from_hexarg, unsigned int num, uint64_t *value) { if (num >= CMD_ARGC) { - command_print(CMD_CTX, "Too few Arguments."); + command_print(CMD, "Too few Arguments."); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -1049,12 +1049,12 @@ static COMMAND_HELPER(get_u64_from_hexarg, unsigned int num, uint64_t *value) *value = strtoull(&(CMD_ARGV[num][2]), &check, 16); if ((value == 0 && errno == ERANGE) || check == NULL || *check != 0) { - command_print(CMD_CTX, "Invalid 64-bit hex value in argument %d.", + command_print(CMD, "Invalid 64-bit hex value in argument %d.", num + 1); return ERROR_COMMAND_SYNTAX_ERROR; } } else { - command_print(CMD_CTX, "Argument %d needs to be a hex value.", num + 1); + command_print(CMD, "Argument %d needs to be a hex value.", num + 1); return ERROR_COMMAND_SYNTAX_ERROR; } return ERROR_OK; @@ -1067,7 +1067,7 @@ COMMAND_HANDLER(samd_handle_nvmuserrow_command) if (target) { if (CMD_ARGC > 2) { - command_print(CMD_CTX, "Too much Arguments given."); + command_print(CMD, "Too much Arguments given."); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -1105,7 +1105,7 @@ COMMAND_HANDLER(samd_handle_nvmuserrow_command) uint64_t value; res = read_userrow(target, &value); if (res == ERROR_OK) - command_print(CMD_CTX, "NVMUSERROW: 0x%016"PRIX64, value); + command_print(CMD, "NVMUSERROW: 0x%016"PRIX64, value); else LOG_ERROR("NVMUSERROW could not be read."); } @@ -1145,7 +1145,7 @@ COMMAND_HANDLER(samd_handle_bootloader_command) } if (code > 6) { - command_print(CMD_CTX, "Invalid bootloader size. Please " + command_print(CMD, "Invalid bootloader size. Please " "see datasheet for a list valid sizes."); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -1166,7 +1166,7 @@ COMMAND_HANDLER(samd_handle_bootloader_command) nb = (2 << (8 - size)) * page_size; /* There are 4 pages per row */ - command_print(CMD_CTX, "Bootloader size is %" PRIu32 " bytes (%" PRIu32 " rows)", + command_print(CMD, "Bootloader size is %" PRIu32 " bytes (%" PRIu32 " rows)", nb, (uint32_t)(nb / (page_size * 4))); } } diff --git a/src/flash/nor/atsame5.c b/src/flash/nor/atsame5.c index 4a114a35f1..eac7847dca 100644 --- a/src/flash/nor/atsame5.c +++ b/src/flash/nor/atsame5.c @@ -765,9 +765,9 @@ COMMAND_HANDLER(same5_handle_chip_erase_command) * perform the erase. */ int res = target_write_u8(target, SAMD_DSU + SAMD_DSU_CTRL_EXT, (1<<4)); if (res == ERROR_OK) - command_print(CMD_CTX, "chip erase started"); + command_print(CMD, "chip erase started"); else - command_print(CMD_CTX, "write to DSU CTRL failed"); + command_print(CMD, "write to DSU CTRL failed"); return res; } @@ -781,7 +781,7 @@ COMMAND_HANDLER(same5_handle_userpage_command) return ERROR_FAIL; if (CMD_ARGC > 2) { - command_print(CMD_CTX, "Too much Arguments given."); + command_print(CMD, "Too much Arguments given."); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -806,7 +806,7 @@ COMMAND_HANDLER(same5_handle_userpage_command) int res2 = target_read_memory(target, SAMD_USER_ROW, 4, 2, buffer); if (res2 == ERROR_OK) { uint64_t value = target_buffer_get_u64(target, buffer); - command_print(CMD_CTX, "USER PAGE: 0x%016"PRIX64, value); + command_print(CMD, "USER PAGE: 0x%016"PRIX64, value); } else { LOG_ERROR("USER PAGE could not be read."); } @@ -829,7 +829,7 @@ COMMAND_HANDLER(same5_handle_bootloader_command) unsigned long size = strtoul(CMD_ARGV[0], NULL, 0); uint32_t code = (size + 8191) / 8192; if (code > 15) { - command_print(CMD_CTX, "Invalid bootloader size. Please " + command_print(CMD, "Invalid bootloader size. Please " "see datasheet for a list valid sizes."); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -842,7 +842,7 @@ COMMAND_HANDLER(same5_handle_bootloader_command) if (res2 == ERROR_OK) { uint32_t code = (val >> 26) & 0xf; /* grab size code */ uint32_t size = (15 - code) * 8192; - command_print(CMD_CTX, "Bootloader protected in the first %" + command_print(CMD, "Bootloader protected in the first %" PRIu32 " bytes", size); } diff --git a/src/flash/nor/atsamv.c b/src/flash/nor/atsamv.c index 5beeefc5ab..d6f1a0a48f 100644 --- a/src/flash/nor/atsamv.c +++ b/src/flash/nor/atsamv.c @@ -672,22 +672,22 @@ showall: r = samv_get_gpnvm(target, x, &v); if (r != ERROR_OK) break; - command_print(CMD_CTX, "samv-gpnvm%u: %u", x, v); + command_print(CMD, "samv-gpnvm%u: %u", x, v); } return r; } if ((who >= 0) && (((unsigned)who) < SAMV_NUM_GPNVM_BITS)) { r = samv_get_gpnvm(target, who, &v); - command_print(CMD_CTX, "samv-gpnvm%u: %u", who, v); + command_print(CMD, "samv-gpnvm%u: %u", who, v); return r; } else { - command_print(CMD_CTX, "invalid gpnvm: %u", who); + command_print(CMD, "invalid gpnvm: %u", who); return ERROR_COMMAND_SYNTAX_ERROR; } } if (who == -1) { - command_print(CMD_CTX, "missing gpnvm number"); + command_print(CMD, "missing gpnvm number"); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -696,7 +696,7 @@ showall: else if (!strcmp("clr", CMD_ARGV[0]) || !strcmp("clear", CMD_ARGV[0])) r = samv_clear_gpnvm(target, who); else { - command_print(CMD_CTX, "unknown command: %s", CMD_ARGV[0]); + command_print(CMD, "unknown command: %s", CMD_ARGV[0]); r = ERROR_COMMAND_SYNTAX_ERROR; } return r; diff --git a/src/flash/nor/avrf.c b/src/flash/nor/avrf.c index 6969f77410..178567e6b4 100644 --- a/src/flash/nor/avrf.c +++ b/src/flash/nor/avrf.c @@ -433,9 +433,9 @@ COMMAND_HANDLER(avrf_handle_mass_erase_command) for (i = 0; i < bank->num_sectors; i++) bank->sectors[i].is_erased = 1; - command_print(CMD_CTX, "avr mass erase complete"); + command_print(CMD, "avr mass erase complete"); } else - command_print(CMD_CTX, "avr mass erase failed"); + command_print(CMD, "avr mass erase failed"); LOG_DEBUG("%s", __func__); return ERROR_OK; diff --git a/src/flash/nor/efm32.c b/src/flash/nor/efm32.c index d2ac3a8fb1..83d133ff61 100644 --- a/src/flash/nor/efm32.c +++ b/src/flash/nor/efm32.c @@ -1093,7 +1093,7 @@ COMMAND_HANDLER(efm32x_handle_debuglock_command) return retval; } - command_print(CMD_CTX, "efm32x debug interface locked, reset the device to apply"); + command_print(CMD, "efm32x debug interface locked, reset the device to apply"); return ERROR_OK; } diff --git a/src/flash/nor/em357.c b/src/flash/nor/em357.c index e6b27283ba..38fb73189a 100644 --- a/src/flash/nor/em357.c +++ b/src/flash/nor/em357.c @@ -776,7 +776,7 @@ COMMAND_HANDLER(em357_handle_lock_command) } if (em357_erase_options(bank) != ERROR_OK) { - command_print(CMD_CTX, "em357 failed to erase options"); + command_print(CMD, "em357 failed to erase options"); return ERROR_OK; } @@ -784,11 +784,11 @@ COMMAND_HANDLER(em357_handle_lock_command) em357_info->option_bytes.RDP = 0; if (em357_write_options(bank) != ERROR_OK) { - command_print(CMD_CTX, "em357 failed to lock device"); + command_print(CMD, "em357 failed to lock device"); return ERROR_OK; } - command_print(CMD_CTX, "em357 locked"); + command_print(CMD, "em357 locked"); return ERROR_OK; } @@ -813,16 +813,16 @@ COMMAND_HANDLER(em357_handle_unlock_command) } if (em357_erase_options(bank) != ERROR_OK) { - command_print(CMD_CTX, "em357 failed to unlock device"); + command_print(CMD, "em357 failed to unlock device"); return ERROR_OK; } if (em357_write_options(bank) != ERROR_OK) { - command_print(CMD_CTX, "em357 failed to lock device"); + command_print(CMD, "em357 failed to lock device"); return ERROR_OK; } - command_print(CMD_CTX, "em357 unlocked.\n" + command_print(CMD, "em357 unlocked.\n" "INFO: a reset or power cycle is required " "for the new settings to take effect."); @@ -886,9 +886,9 @@ COMMAND_HANDLER(em357_handle_mass_erase_command) for (i = 0; i < bank->num_sectors; i++) bank->sectors[i].is_erased = 1; - command_print(CMD_CTX, "em357 mass erase complete"); + command_print(CMD, "em357 mass erase complete"); } else - command_print(CMD_CTX, "em357 mass erase failed"); + command_print(CMD, "em357 mass erase failed"); return retval; } diff --git a/src/flash/nor/esirisc_flash.c b/src/flash/nor/esirisc_flash.c index 948d001a06..4e33b94299 100644 --- a/src/flash/nor/esirisc_flash.c +++ b/src/flash/nor/esirisc_flash.c @@ -516,7 +516,7 @@ COMMAND_HANDLER(handle_esirisc_flash_mass_erase_command) retval = esirisc_flash_mass_erase(bank); - command_print(CMD_CTX, "mass erase %s", + command_print(CMD, "mass erase %s", (retval == ERROR_OK) ? "successful" : "failed"); return retval; @@ -536,7 +536,7 @@ COMMAND_HANDLER(handle_esirisc_flash_ref_erase_command) retval = esirisc_flash_ref_erase(bank); - command_print(CMD_CTX, "erase reference cell %s", + command_print(CMD, "erase reference cell %s", (retval == ERROR_OK) ? "successful" : "failed"); return retval; diff --git a/src/flash/nor/fm3.c b/src/flash/nor/fm3.c index f2da2af8ae..eeefa3f43e 100644 --- a/src/flash/nor/fm3.c +++ b/src/flash/nor/fm3.c @@ -958,9 +958,9 @@ COMMAND_HANDLER(fm3_handle_chip_erase_command) for (i = 0; i < bank->num_sectors; i++) bank->sectors[i].is_erased = 1; - command_print(CMD_CTX, "fm3 chip erase complete"); + command_print(CMD, "fm3 chip erase complete"); } else { - command_print(CMD_CTX, "fm3 chip erase failed"); + command_print(CMD, "fm3 chip erase failed"); } return ERROR_OK; diff --git a/src/flash/nor/kinetis.c b/src/flash/nor/kinetis.c index 847513502a..687a3370b3 100644 --- a/src/flash/nor/kinetis.c +++ b/src/flash/nor/kinetis.c @@ -2895,7 +2895,7 @@ COMMAND_HANDLER(kinetis_nvm_partition) flex_nvm_partition_code = (uint8_t)((sim_fcfg1 >> 8) & 0x0f); switch (flex_nvm_partition_code) { case 0: - command_print(CMD_CTX, "No EEPROM backup, data flash only"); + command_print(CMD, "No EEPROM backup, data flash only"); break; case 1: case 2: @@ -2903,10 +2903,10 @@ COMMAND_HANDLER(kinetis_nvm_partition) case 4: case 5: case 6: - command_print(CMD_CTX, "EEPROM backup %d KB", 4 << flex_nvm_partition_code); + command_print(CMD, "EEPROM backup %d KB", 4 << flex_nvm_partition_code); break; case 8: - command_print(CMD_CTX, "No data flash, EEPROM backup only"); + command_print(CMD, "No data flash, EEPROM backup only"); break; case 0x9: case 0xA: @@ -2914,13 +2914,13 @@ COMMAND_HANDLER(kinetis_nvm_partition) case 0xC: case 0xD: case 0xE: - command_print(CMD_CTX, "data flash %d KB", 4 << (flex_nvm_partition_code & 7)); + command_print(CMD, "data flash %d KB", 4 << (flex_nvm_partition_code & 7)); break; case 0xf: - command_print(CMD_CTX, "No EEPROM backup, data flash only (DEPART not set)"); + command_print(CMD, "No EEPROM backup, data flash only (DEPART not set)"); break; default: - command_print(CMD_CTX, "Unsupported EEPROM backup size code 0x%02" PRIx8, flex_nvm_partition_code); + command_print(CMD, "Unsupported EEPROM backup size code 0x%02" PRIx8, flex_nvm_partition_code); } return ERROR_OK; @@ -2986,7 +2986,7 @@ COMMAND_HANDLER(kinetis_nvm_partition) if (result != ERROR_OK) return result; - command_print(CMD_CTX, "FlexNVM partition set. Please reset MCU."); + command_print(CMD, "FlexNVM partition set. Please reset MCU."); if (k_chip) { first_nvm_bank = k_chip->num_pflash_blocks; @@ -2996,7 +2996,7 @@ COMMAND_HANDLER(kinetis_nvm_partition) k_chip->probed = false; } - command_print(CMD_CTX, "FlexNVM banks will be re-probed to set new data flash size."); + command_print(CMD, "FlexNVM banks will be re-probed to set new data flash size."); return ERROR_OK; } @@ -3015,12 +3015,12 @@ COMMAND_HANDLER(kinetis_fcf_source_handler) } if (allow_fcf_writes) { - command_print(CMD_CTX, "Arbitrary Flash Configuration Field writes enabled."); - command_print(CMD_CTX, "Protection info writes to FCF disabled."); + command_print(CMD, "Arbitrary Flash Configuration Field writes enabled."); + command_print(CMD, "Protection info writes to FCF disabled."); LOG_WARNING("BEWARE: incorrect flash configuration may permanently lock the device."); } else { - command_print(CMD_CTX, "Protection info writes to Flash Configuration Field enabled."); - command_print(CMD_CTX, "Arbitrary FCF writes disabled. Mode safe from unwanted locking of the device."); + command_print(CMD, "Protection info writes to Flash Configuration Field enabled."); + command_print(CMD, "Arbitrary FCF writes disabled. Mode safe from unwanted locking of the device."); } return ERROR_OK; @@ -3035,7 +3035,7 @@ COMMAND_HANDLER(kinetis_fopt_handler) fcf_fopt = (uint8_t)strtoul(CMD_ARGV[0], NULL, 0); fcf_fopt_configured = true; } else { - command_print(CMD_CTX, "FCF_FOPT 0x%02" PRIx8, fcf_fopt); + command_print(CMD, "FCF_FOPT 0x%02" PRIx8, fcf_fopt); } return ERROR_OK; diff --git a/src/flash/nor/lpc2000.c b/src/flash/nor/lpc2000.c index cb3f58e870..2a69af6920 100644 --- a/src/flash/nor/lpc2000.c +++ b/src/flash/nor/lpc2000.c @@ -1579,11 +1579,11 @@ COMMAND_HANDLER(lpc2000_handle_part_id_command) int status_code = get_lpc2000_part_id(bank, &part_id); if (status_code != 0x0) { if (status_code == ERROR_FLASH_OPERATION_FAILED) { - command_print(CMD_CTX, "no sufficient working area specified, can't access LPC2000 IAP interface"); + command_print(CMD, "no sufficient working area specified, can't access LPC2000 IAP interface"); } else - command_print(CMD_CTX, "lpc2000 IAP returned status code %i", status_code); + command_print(CMD, "lpc2000 IAP returned status code %i", status_code); } else - command_print(CMD_CTX, "lpc2000 part id: 0x%8.8" PRIx32, part_id); + command_print(CMD, "lpc2000 part id: 0x%8.8" PRIx32, part_id); return retval; } diff --git a/src/flash/nor/lpc2900.c b/src/flash/nor/lpc2900.c index c798e44555..5412c93def 100644 --- a/src/flash/nor/lpc2900.c +++ b/src/flash/nor/lpc2900.c @@ -501,7 +501,7 @@ COMMAND_HANDLER(lpc2900_handle_signature_command) if (status != ERROR_OK) return status; - command_print(CMD_CTX, "signature: 0x%8.8" PRIx32 + command_print(CMD, "signature: 0x%8.8" PRIx32 ":0x%8.8" PRIx32 ":0x%8.8" PRIx32 ":0x%8.8" PRIx32, @@ -595,11 +595,11 @@ COMMAND_HANDLER(lpc2900_handle_password_command) lpc2900_info->risky = !strcmp(CMD_ARGV[1], ISS_PASSWORD); if (!lpc2900_info->risky) { - command_print(CMD_CTX, "Wrong password (use '%s')", ISS_PASSWORD); + command_print(CMD, "Wrong password (use '%s')", ISS_PASSWORD); return ERROR_COMMAND_ARGUMENT_INVALID; } - command_print(CMD_CTX, + command_print(CMD, "Potentially dangerous operation allowed in next command!"); return ERROR_OK; @@ -622,7 +622,7 @@ COMMAND_HANDLER(lpc2900_handle_write_custom_command) /* Check if command execution is allowed. */ if (!lpc2900_info->risky) { - command_print(CMD_CTX, "Command execution not allowed!"); + command_print(CMD, "Command execution not allowed!"); return ERROR_COMMAND_ARGUMENT_INVALID; } lpc2900_info->risky = 0; @@ -721,7 +721,7 @@ COMMAND_HANDLER(lpc2900_handle_secure_sector_command) /* Check if command execution is allowed. */ if (!lpc2900_info->risky) { - command_print(CMD_CTX, "Command execution not allowed! " + command_print(CMD, "Command execution not allowed! " "(use 'password' command first)"); return ERROR_COMMAND_ARGUMENT_INVALID; } @@ -734,7 +734,7 @@ COMMAND_HANDLER(lpc2900_handle_secure_sector_command) if ((first >= bank->num_sectors) || (last >= bank->num_sectors) || (first > last)) { - command_print(CMD_CTX, "Illegal sector range"); + command_print(CMD, "Illegal sector range"); return ERROR_COMMAND_ARGUMENT_INVALID; } @@ -773,7 +773,7 @@ COMMAND_HANDLER(lpc2900_handle_secure_sector_command) } } - command_print(CMD_CTX, + command_print(CMD, "Sectors security will become effective after next power cycle"); /* Update the sector security status */ @@ -803,7 +803,7 @@ COMMAND_HANDLER(lpc2900_handle_secure_jtag_command) /* Check if command execution is allowed. */ if (!lpc2900_info->risky) { - command_print(CMD_CTX, "Command execution not allowed! " + command_print(CMD, "Command execution not allowed! " "(use 'password' command first)"); return ERROR_COMMAND_ARGUMENT_INVALID; } diff --git a/src/flash/nor/max32xxx.c b/src/flash/nor/max32xxx.c index f51f6e2a99..3bf4b22ff1 100644 --- a/src/flash/nor/max32xxx.c +++ b/src/flash/nor/max32xxx.c @@ -772,7 +772,7 @@ COMMAND_HANDLER(max32xxx_handle_mass_erase_command) int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank); if (CMD_ARGC < 1) { - command_print(CMD_CTX, "max32xxx mass_erase "); + command_print(CMD, "max32xxx mass_erase "); return ERROR_OK; } @@ -784,9 +784,9 @@ COMMAND_HANDLER(max32xxx_handle_mass_erase_command) for (i = 0; i < bank->num_sectors; i++) bank->sectors[i].is_erased = 1; - command_print(CMD_CTX, "max32xxx mass erase complete"); + command_print(CMD, "max32xxx mass erase complete"); } else - command_print(CMD_CTX, "max32xxx mass erase failed"); + command_print(CMD, "max32xxx mass erase failed"); return ERROR_OK; } @@ -799,7 +799,7 @@ COMMAND_HANDLER(max32xxx_handle_protection_set_command) uint32_t addr, len; if (CMD_ARGC != 3) { - command_print(CMD_CTX, "max32xxx protection_set "); + command_print(CMD, "max32xxx protection_set "); return ERROR_OK; } @@ -811,7 +811,7 @@ COMMAND_HANDLER(max32xxx_handle_protection_set_command) /* Convert the range to the page numbers */ if (1 != sscanf(CMD_ARGV[1], "0x%"SCNx32, &addr)) { LOG_WARNING("Error parsing address"); - command_print(CMD_CTX, "max32xxx protection_set "); + command_print(CMD, "max32xxx protection_set "); return ERROR_FAIL; } /* Mask off the top portion on the address */ @@ -819,7 +819,7 @@ COMMAND_HANDLER(max32xxx_handle_protection_set_command) if (1 != sscanf(CMD_ARGV[2], "0x%"SCNx32, &len)) { LOG_WARNING("Error parsing length"); - command_print(CMD_CTX, "max32xxx protection_set "); + command_print(CMD, "max32xxx protection_set "); return ERROR_FAIL; } @@ -840,9 +840,9 @@ COMMAND_HANDLER(max32xxx_handle_protection_set_command) len = addr + (len / info->sector_size) - 1; if (max32xxx_protect(bank, 1, addr, len) == ERROR_OK) - command_print(CMD_CTX, "max32xxx protection set complete"); + command_print(CMD, "max32xxx protection set complete"); else - command_print(CMD_CTX, "max32xxx protection set failed"); + command_print(CMD, "max32xxx protection set failed"); return ERROR_OK; } @@ -855,7 +855,7 @@ COMMAND_HANDLER(max32xxx_handle_protection_clr_command) uint32_t addr, len; if (CMD_ARGC != 3) { - command_print(CMD_CTX, "max32xxx protection_clr "); + command_print(CMD, "max32xxx protection_clr "); return ERROR_OK; } @@ -867,7 +867,7 @@ COMMAND_HANDLER(max32xxx_handle_protection_clr_command) /* Convert the range to the page numbers */ if (1 != sscanf(CMD_ARGV[1], "0x%"SCNx32, &addr)) { LOG_WARNING("Error parsing address"); - command_print(CMD_CTX, "max32xxx protection_clr "); + command_print(CMD, "max32xxx protection_clr "); return ERROR_FAIL; } /* Mask off the top portion on the address */ @@ -875,7 +875,7 @@ COMMAND_HANDLER(max32xxx_handle_protection_clr_command) if (1 != sscanf(CMD_ARGV[2], "0x%"SCNx32, &len)) { LOG_WARNING("Error parsing length"); - command_print(CMD_CTX, "max32xxx protection_clr "); + command_print(CMD, "max32xxx protection_clr "); return ERROR_FAIL; } @@ -896,9 +896,9 @@ COMMAND_HANDLER(max32xxx_handle_protection_clr_command) len = addr + (len / info->sector_size) - 1; if (max32xxx_protect(bank, 0, addr, len) == ERROR_OK) - command_print(CMD_CTX, "max32xxx protection clear complete"); + command_print(CMD, "max32xxx protection clear complete"); else - command_print(CMD_CTX, "max32xxx protection clear failed"); + command_print(CMD, "max32xxx protection clear failed"); return ERROR_OK; } @@ -911,7 +911,7 @@ COMMAND_HANDLER(max32xxx_handle_protection_check_command) int i; if (CMD_ARGC < 1) { - command_print(CMD_CTX, "max32xxx protection_check "); + command_print(CMD, "max32xxx protection_check "); return ERROR_OK; } diff --git a/src/flash/nor/niietcm4.c b/src/flash/nor/niietcm4.c index b034ee1278..62549f206b 100644 --- a/src/flash/nor/niietcm4.c +++ b/src/flash/nor/niietcm4.c @@ -425,7 +425,7 @@ COMMAND_HANDLER(niietcm4_handle_uflash_read_byte_command) retval = target_read_u32(target, UFMD, &uflash_data); if (retval != ERROR_OK) return retval; - command_print(CMD_CTX, "Read userflash %s region:\n" + command_print(CMD, "Read userflash %s region:\n" "address = 0x%04x,\n" "value = 0x%02x.", CMD_ARGV[0], uflash_addr, uflash_data); return retval; @@ -467,7 +467,7 @@ COMMAND_HANDLER(niietcm4_handle_uflash_write_byte_command) int page_num = uflash_addr/USERFLASH_PAGE_SIZE; - command_print(CMD_CTX, "Write userflash %s region:\n" + command_print(CMD, "Write userflash %s region:\n" "address = 0x%04x,\n" "value = 0x%02x.\n" "Please wait ... ", CMD_ARGV[0], uflash_addr, uflash_data); @@ -483,7 +483,7 @@ COMMAND_HANDLER(niietcm4_handle_uflash_write_byte_command) /* write dump to userflash */ niietcm4_load_uflash_page(bank, uflash_dump, page_num, mem_type); - command_print(CMD_CTX, "done!"); + command_print(CMD, "done!"); return retval; } @@ -520,7 +520,7 @@ COMMAND_HANDLER(niietcm4_handle_uflash_full_erase_command) retval = niietcm4_uopstatus_check(bank); if (retval != ERROR_OK) return retval; - command_print(CMD_CTX, "Userflash full erase done!"); + command_print(CMD, "Userflash full erase done!"); return retval; } @@ -563,7 +563,7 @@ COMMAND_HANDLER(niietcm4_handle_uflash_erase_command) return retval; } - command_print(CMD_CTX, "Erase %s userflash pages %d through %d done!", CMD_ARGV[0], first, last); + command_print(CMD, "Erase %s userflash pages %d through %d done!", CMD_ARGV[0], first, last); return retval; } @@ -621,9 +621,9 @@ COMMAND_HANDLER(niietcm4_handle_uflash_protect_check_command) return retval; if (uflash_data & INFOWORD3_LOCK_IFB_UF) - command_print(CMD_CTX, "All sectors of info userflash are not protected!"); + command_print(CMD, "All sectors of info userflash are not protected!"); else - command_print(CMD_CTX, "All sectors of info userflash are protected!"); + command_print(CMD, "All sectors of info userflash are protected!"); } else { uflash_addr = UF_LOCK_ADDR; uflash_cmd = UFMC_MAGIC_KEY | UFMC_READ_IFB; @@ -645,10 +645,10 @@ COMMAND_HANDLER(niietcm4_handle_uflash_protect_check_command) for (j = 0; j < 8; j++) { if (uflash_data & 0x1) - command_print(CMD_CTX, "Userflash sector #%03d: 0x%04x (0x100) is not protected!", + command_print(CMD, "Userflash sector #%03d: 0x%04x (0x100) is not protected!", i*8+j, (i*8+j)*USERFLASH_PAGE_SIZE); else - command_print(CMD_CTX, "Userflash sector #%03d: 0x%04x (0x100) is protected!", + command_print(CMD, "Userflash sector #%03d: 0x%04x (0x100) is protected!", i*8+j, (i*8+j)*USERFLASH_PAGE_SIZE); uflash_data = uflash_data >> 1; } @@ -693,11 +693,11 @@ COMMAND_HANDLER(niietcm4_handle_uflash_protect_command) int set; if (strcmp("on", CMD_ARGV[3]) == 0) { - command_print(CMD_CTX, "Try to enable %s userflash sectors %d through %d protection. Please wait ... ", + command_print(CMD, "Try to enable %s userflash sectors %d through %d protection. Please wait ... ", CMD_ARGV[0], first, last); set = 1; } else if (strcmp("off", CMD_ARGV[3]) == 0) { - command_print(CMD_CTX, "Try to disable %s userflash sectors %d through %d protection. Please wait ... ", + command_print(CMD, "Try to disable %s userflash sectors %d through %d protection. Please wait ... ", CMD_ARGV[0], first, last); set = 0; } else @@ -707,7 +707,7 @@ COMMAND_HANDLER(niietcm4_handle_uflash_protect_command) if (retval != ERROR_OK) return retval; - command_print(CMD_CTX, "done!"); + command_print(CMD, "done!"); return retval; } @@ -733,10 +733,10 @@ COMMAND_HANDLER(niietcm4_handle_bflash_info_remap_command) int set; if (strcmp("on", CMD_ARGV[0]) == 0) { - command_print(CMD_CTX, "Try to enable bootflash info region remap. Please wait ..."); + command_print(CMD, "Try to enable bootflash info region remap. Please wait ..."); set = 1; } else if (strcmp("off", CMD_ARGV[0]) == 0) { - command_print(CMD_CTX, "Try to disable bootflash info region remap. Please wait ..."); + command_print(CMD, "Try to disable bootflash info region remap. Please wait ..."); set = 0; } else return ERROR_COMMAND_SYNTAX_ERROR; @@ -756,7 +756,7 @@ COMMAND_HANDLER(niietcm4_handle_bflash_info_remap_command) /* write dump to userflash */ niietcm4_load_uflash_page(bank, uflash_dump, 0, 1); - command_print(CMD_CTX, "done!"); + command_print(CMD, "done!"); return retval; } @@ -814,7 +814,7 @@ COMMAND_HANDLER(niietcm4_handle_extmem_cfg_command) else return ERROR_COMMAND_SYNTAX_ERROR; - command_print(CMD_CTX, "Try to configure external memory boot interface:\n" + command_print(CMD, "Try to configure external memory boot interface:\n" "port = %s\n" "pin = %s\n" "func = %s\n" @@ -833,7 +833,7 @@ COMMAND_HANDLER(niietcm4_handle_extmem_cfg_command) /* write dump to userflash */ niietcm4_load_uflash_page(bank, uflash_dump, 0, 1); - command_print(CMD_CTX, "done!"); + command_print(CMD, "done!"); return retval; } @@ -861,10 +861,10 @@ COMMAND_HANDLER(niietcm4_handle_extmem_boot_command) int set; if (strcmp("on", CMD_ARGV[0]) == 0) { - command_print(CMD_CTX, "Try to enable boot from external memory. Please wait ..."); + command_print(CMD, "Try to enable boot from external memory. Please wait ..."); set = 1; } else if (strcmp("off", CMD_ARGV[0]) == 0) { - command_print(CMD_CTX, "Try to disable boot from external memory. Please wait ..."); + command_print(CMD, "Try to disable boot from external memory. Please wait ..."); set = 0; } else return ERROR_COMMAND_SYNTAX_ERROR; @@ -884,7 +884,7 @@ COMMAND_HANDLER(niietcm4_handle_extmem_boot_command) /* write dump to userflash */ niietcm4_load_uflash_page(bank, uflash_dump, 0, 1); - command_print(CMD_CTX, "done!"); + command_print(CMD, "done!"); return retval; } @@ -900,7 +900,7 @@ COMMAND_HANDLER(niietcm4_handle_service_mode_erase_command) return retval; struct target *target = bank->target; - command_print(CMD_CTX, "Try to perform service mode erase. Please wait ..."); + command_print(CMD, "Try to perform service mode erase. Please wait ..."); retval = target_write_u32(target, SERVICE_MODE_ERASE_ADDR, 1); if (retval != ERROR_OK) @@ -923,7 +923,7 @@ COMMAND_HANDLER(niietcm4_handle_service_mode_erase_command) } busy_sleep(1); /* can use busy sleep for short times. */ } - command_print(CMD_CTX, "done! All data erased."); + command_print(CMD, "done! All data erased."); return retval; } @@ -938,7 +938,7 @@ COMMAND_HANDLER(niietcm4_handle_driver_info_command) if (retval != ERROR_OK) return retval; - command_print(CMD_CTX, "niietcm4 flash driver\n" + command_print(CMD, "niietcm4 flash driver\n" "version: %d.%d\n" "author: Bogdan Kolbov\n" "mail: kolbov@niiet.ru", diff --git a/src/flash/nor/numicro.c b/src/flash/nor/numicro.c index 47f9a8826c..c62af04bf2 100644 --- a/src/flash/nor/numicro.c +++ b/src/flash/nor/numicro.c @@ -1827,11 +1827,11 @@ COMMAND_HANDLER(numicro_handle_chip_erase_command) retval = numicro_fmc_cmd(target, ISPCMD_CHIPERASE, 0, 0, &rdat); if (retval != ERROR_OK) { - command_print(CMD_CTX, "numicro chip_erase failed"); + command_print(CMD, "numicro chip_erase failed"); return retval; } - command_print(CMD_CTX, "numicro chip_erase complete"); + command_print(CMD, "numicro chip_erase complete"); return ERROR_OK; } diff --git a/src/flash/nor/pic32mx.c b/src/flash/nor/pic32mx.c index 5ad4cb7e5b..81ffdc400c 100644 --- a/src/flash/nor/pic32mx.c +++ b/src/flash/nor/pic32mx.c @@ -858,7 +858,7 @@ COMMAND_HANDLER(pic32mx_handle_pgm_word_command) return retval; if (address < bank->base || address >= (bank->base + bank->size)) { - command_print(CMD_CTX, "flash address '%s' is out of bounds", CMD_ARGV[0]); + command_print(CMD, "flash address '%s' is out of bounds", CMD_ARGV[0]); return ERROR_OK; } @@ -870,9 +870,9 @@ COMMAND_HANDLER(pic32mx_handle_pgm_word_command) res = ERROR_FLASH_OPERATION_FAILED; if (res == ERROR_OK) - command_print(CMD_CTX, "pic32mx pgm word complete"); + command_print(CMD, "pic32mx pgm word complete"); else - command_print(CMD_CTX, "pic32mx pgm word failed (status = 0x%x)", status); + command_print(CMD, "pic32mx pgm word failed (status = 0x%x)", status); return ERROR_OK; } @@ -885,7 +885,7 @@ COMMAND_HANDLER(pic32mx_handle_unlock_command) int timeout = 10; if (CMD_ARGC < 1) { - command_print(CMD_CTX, "pic32mx unlock "); + command_print(CMD, "pic32mx unlock "); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -907,7 +907,7 @@ COMMAND_HANDLER(pic32mx_handle_unlock_command) mips_ejtag_drscan_8(ejtag_info, &mchip_cmd); if (mchip_cmd & (1 << 7)) { /* device is not locked */ - command_print(CMD_CTX, "pic32mx is already unlocked, erasing anyway"); + command_print(CMD, "pic32mx is already unlocked, erasing anyway"); } /* unlock/erase device */ @@ -931,7 +931,7 @@ COMMAND_HANDLER(pic32mx_handle_unlock_command) /* select ejtag tap */ mips_ejtag_set_instr(ejtag_info, MTAP_SW_ETAP); - command_print(CMD_CTX, "pic32mx unlocked.\n" + command_print(CMD, "pic32mx unlocked.\n" "INFO: a reset or power cycle is required " "for the new settings to take effect."); diff --git a/src/flash/nor/psoc4.c b/src/flash/nor/psoc4.c index 0058f2dadf..1eb6a26eda 100644 --- a/src/flash/nor/psoc4.c +++ b/src/flash/nor/psoc4.c @@ -913,9 +913,9 @@ COMMAND_HANDLER(psoc4_handle_mass_erase_command) retval = psoc4_mass_erase(bank); if (retval == ERROR_OK) - command_print(CMD_CTX, "psoc mass erase complete"); + command_print(CMD, "psoc mass erase complete"); else - command_print(CMD_CTX, "psoc mass erase failed"); + command_print(CMD, "psoc mass erase failed"); return retval; } diff --git a/src/flash/nor/psoc5lp.c b/src/flash/nor/psoc5lp.c index 66e2b071ef..7f801f294a 100644 --- a/src/flash/nor/psoc5lp.c +++ b/src/flash/nor/psoc5lp.c @@ -1501,9 +1501,9 @@ COMMAND_HANDLER(psoc5lp_handle_mass_erase_command) retval = psoc5lp_spc_erase_all(bank->target); if (retval == ERROR_OK) - command_print(CMD_CTX, "PSoC 5LP erase succeeded"); + command_print(CMD, "PSoC 5LP erase succeeded"); else - command_print(CMD_CTX, "PSoC 5LP erase failed"); + command_print(CMD, "PSoC 5LP erase failed"); return retval; } diff --git a/src/flash/nor/stellaris.c b/src/flash/nor/stellaris.c index 6b6f6e802b..9c4c4bc89c 100644 --- a/src/flash/nor/stellaris.c +++ b/src/flash/nor/stellaris.c @@ -1336,9 +1336,9 @@ COMMAND_HANDLER(stellaris_handle_mass_erase_command) for (i = 0; i < bank->num_sectors; i++) bank->sectors[i].is_erased = 1; - command_print(CMD_CTX, "stellaris mass erase complete"); + command_print(CMD, "stellaris mass erase complete"); } else - command_print(CMD_CTX, "stellaris mass erase failed"); + command_print(CMD, "stellaris mass erase failed"); return ERROR_OK; } diff --git a/src/flash/nor/stm32f1x.c b/src/flash/nor/stm32f1x.c index d5d59c6113..cf10e3747a 100644 --- a/src/flash/nor/stm32f1x.c +++ b/src/flash/nor/stm32f1x.c @@ -1186,7 +1186,7 @@ COMMAND_HANDLER(stm32x_handle_lock_command) return retval; if (stm32x_erase_options(bank) != ERROR_OK) { - command_print(CMD_CTX, "stm32x failed to erase options"); + command_print(CMD, "stm32x failed to erase options"); return ERROR_OK; } @@ -1194,11 +1194,11 @@ COMMAND_HANDLER(stm32x_handle_lock_command) stm32x_info->option_bytes.rdp = 0; if (stm32x_write_options(bank) != ERROR_OK) { - command_print(CMD_CTX, "stm32x failed to lock device"); + command_print(CMD, "stm32x failed to lock device"); return ERROR_OK; } - command_print(CMD_CTX, "stm32x locked"); + command_print(CMD, "stm32x locked"); return ERROR_OK; } @@ -1227,16 +1227,16 @@ COMMAND_HANDLER(stm32x_handle_unlock_command) return retval; if (stm32x_erase_options(bank) != ERROR_OK) { - command_print(CMD_CTX, "stm32x failed to erase options"); + command_print(CMD, "stm32x failed to erase options"); return ERROR_OK; } if (stm32x_write_options(bank) != ERROR_OK) { - command_print(CMD_CTX, "stm32x failed to unlock device"); + command_print(CMD, "stm32x failed to unlock device"); return ERROR_OK; } - command_print(CMD_CTX, "stm32x unlocked.\n" + command_print(CMD, "stm32x unlocked.\n" "INFO: a reset or power cycle is required " "for the new settings to take effect."); @@ -1281,30 +1281,30 @@ COMMAND_HANDLER(stm32x_handle_options_read_command) return retval; if (optionbyte & (1 << OPT_ERROR)) - command_print(CMD_CTX, "option byte complement error"); + command_print(CMD, "option byte complement error"); - command_print(CMD_CTX, "option byte register = 0x%" PRIx32 "", optionbyte); - command_print(CMD_CTX, "write protection register = 0x%" PRIx32 "", protection); + command_print(CMD, "option byte register = 0x%" PRIx32 "", optionbyte); + command_print(CMD, "write protection register = 0x%" PRIx32 "", protection); - command_print(CMD_CTX, "read protection: %s", + command_print(CMD, "read protection: %s", (optionbyte & (1 << OPT_READOUT)) ? "on" : "off"); /* user option bytes are offset depending on variant */ optionbyte >>= stm32x_info->option_offset; - command_print(CMD_CTX, "watchdog: %sware", + command_print(CMD, "watchdog: %sware", (optionbyte & (1 << OPT_RDWDGSW)) ? "soft" : "hard"); - command_print(CMD_CTX, "stop mode: %sreset generated upon entry", + command_print(CMD, "stop mode: %sreset generated upon entry", (optionbyte & (1 << OPT_RDRSTSTOP)) ? "no " : ""); - command_print(CMD_CTX, "standby mode: %sreset generated upon entry", + command_print(CMD, "standby mode: %sreset generated upon entry", (optionbyte & (1 << OPT_RDRSTSTDBY)) ? "no " : ""); if (stm32x_info->has_dual_banks) - command_print(CMD_CTX, "boot: bank %d", (optionbyte & (1 << OPT_BFB2)) ? 0 : 1); + command_print(CMD, "boot: bank %d", (optionbyte & (1 << OPT_BFB2)) ? 0 : 1); - command_print(CMD_CTX, "user data = 0x%02" PRIx16 "", user_data); + command_print(CMD, "user data = 0x%02" PRIx16 "", user_data); return ERROR_OK; } @@ -1383,7 +1383,7 @@ COMMAND_HANDLER(stm32x_handle_options_write_command) } if (stm32x_erase_options(bank) != ERROR_OK) { - command_print(CMD_CTX, "stm32x failed to erase options"); + command_print(CMD, "stm32x failed to erase options"); return ERROR_OK; } @@ -1391,11 +1391,11 @@ COMMAND_HANDLER(stm32x_handle_options_write_command) stm32x_info->option_bytes.data = useropt; if (stm32x_write_options(bank) != ERROR_OK) { - command_print(CMD_CTX, "stm32x failed to write options"); + command_print(CMD, "stm32x failed to write options"); return ERROR_OK; } - command_print(CMD_CTX, "stm32x write options complete.\n" + command_print(CMD, "stm32x write options complete.\n" "INFO: %spower cycle is required " "for the new settings to take effect.", stm32x_info->can_load_options @@ -1504,9 +1504,9 @@ COMMAND_HANDLER(stm32x_handle_mass_erase_command) for (i = 0; i < bank->num_sectors; i++) bank->sectors[i].is_erased = 1; - command_print(CMD_CTX, "stm32x mass erase complete"); + command_print(CMD, "stm32x mass erase complete"); } else - command_print(CMD_CTX, "stm32x mass erase failed"); + command_print(CMD, "stm32x mass erase failed"); return retval; } diff --git a/src/flash/nor/stm32f2x.c b/src/flash/nor/stm32f2x.c index 23f0030851..b49e76e321 100644 --- a/src/flash/nor/stm32f2x.c +++ b/src/flash/nor/stm32f2x.c @@ -1415,7 +1415,7 @@ COMMAND_HANDLER(stm32x_handle_lock_command) } if (stm32x_read_options(bank) != ERROR_OK) { - command_print(CMD_CTX, "%s failed to read options", bank->driver->name); + command_print(CMD, "%s failed to read options", bank->driver->name); return ERROR_OK; } @@ -1423,11 +1423,11 @@ COMMAND_HANDLER(stm32x_handle_lock_command) stm32x_info->option_bytes.RDP = 0; if (stm32x_write_options(bank) != ERROR_OK) { - command_print(CMD_CTX, "%s failed to lock device", bank->driver->name); + command_print(CMD, "%s failed to lock device", bank->driver->name); return ERROR_OK; } - command_print(CMD_CTX, "%s locked", bank->driver->name); + command_print(CMD, "%s locked", bank->driver->name); return ERROR_OK; } @@ -1454,7 +1454,7 @@ COMMAND_HANDLER(stm32x_handle_unlock_command) } if (stm32x_read_options(bank) != ERROR_OK) { - command_print(CMD_CTX, "%s failed to read options", bank->driver->name); + command_print(CMD, "%s failed to read options", bank->driver->name); return ERROR_OK; } @@ -1466,11 +1466,11 @@ COMMAND_HANDLER(stm32x_handle_unlock_command) } if (stm32x_write_options(bank) != ERROR_OK) { - command_print(CMD_CTX, "%s failed to unlock device", bank->driver->name); + command_print(CMD, "%s failed to unlock device", bank->driver->name); return ERROR_OK; } - command_print(CMD_CTX, "%s unlocked.\n" + command_print(CMD, "%s unlocked.\n" "INFO: a reset or power cycle is required " "for the new settings to take effect.", bank->driver->name); @@ -1525,7 +1525,7 @@ COMMAND_HANDLER(stm32x_handle_mass_erase_command) int i; if (CMD_ARGC < 1) { - command_print(CMD_CTX, "stm32x mass_erase "); + command_print(CMD, "stm32x mass_erase "); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -1540,9 +1540,9 @@ COMMAND_HANDLER(stm32x_handle_mass_erase_command) for (i = 0; i < bank->num_sectors; i++) bank->sectors[i].is_erased = 1; - command_print(CMD_CTX, "stm32x mass erase complete"); + command_print(CMD, "stm32x mass erase complete"); } else { - command_print(CMD_CTX, "stm32x mass erase failed"); + command_print(CMD, "stm32x mass erase failed"); } return retval; @@ -1555,7 +1555,7 @@ COMMAND_HANDLER(stm32f2x_handle_options_read_command) struct stm32x_flash_bank *stm32x_info = NULL; if (CMD_ARGC != 1) { - command_print(CMD_CTX, "stm32f2x options_read "); + command_print(CMD, "stm32f2x options_read "); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -1572,20 +1572,20 @@ COMMAND_HANDLER(stm32f2x_handle_options_read_command) if (stm32x_info->has_boot_addr) { uint32_t boot_addr = stm32x_info->option_bytes.boot_addr; - command_print(CMD_CTX, "stm32f2x user_options 0x%03X," + command_print(CMD, "stm32f2x user_options 0x%03X," " boot_add0 0x%04X, boot_add1 0x%04X", stm32x_info->option_bytes.user_options, boot_addr & 0xffff, (boot_addr & 0xffff0000) >> 16); if (stm32x_info->has_optcr2_pcrop) { - command_print(CMD_CTX, "stm32f2x optcr2_pcrop 0x%08X", + command_print(CMD, "stm32f2x optcr2_pcrop 0x%08X", stm32x_info->option_bytes.optcr2_pcrop); } } else { - command_print(CMD_CTX, "stm32f2x user_options 0x%03X", + command_print(CMD, "stm32f2x user_options 0x%03X", stm32x_info->option_bytes.user_options); } } else { - command_print(CMD_CTX, "stm32f2x user_options 0x%02X", + command_print(CMD, "stm32f2x user_options 0x%02X", stm32x_info->option_bytes.user_options); } @@ -1601,7 +1601,7 @@ COMMAND_HANDLER(stm32f2x_handle_options_write_command) uint16_t user_options, boot_addr0, boot_addr1, options_mask; if (CMD_ARGC < 1) { - command_print(CMD_CTX, "stm32f2x options_write ..."); + command_print(CMD, "stm32f2x options_write ..."); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -1616,7 +1616,7 @@ COMMAND_HANDLER(stm32f2x_handle_options_write_command) stm32x_info = bank->driver_priv; if (stm32x_info->has_boot_addr) { if (CMD_ARGC != 4) { - command_print(CMD_CTX, "stm32f2x options_write " + command_print(CMD, "stm32f2x options_write " " "); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -1625,7 +1625,7 @@ COMMAND_HANDLER(stm32f2x_handle_options_write_command) stm32x_info->option_bytes.boot_addr = boot_addr0 | (((uint32_t) boot_addr1) << 16); } else { if (CMD_ARGC != 2) { - command_print(CMD_CTX, "stm32f2x options_write "); + command_print(CMD, "stm32f2x options_write "); return ERROR_COMMAND_SYNTAX_ERROR; } } @@ -1634,14 +1634,14 @@ COMMAND_HANDLER(stm32f2x_handle_options_write_command) options_mask = !stm32x_info->has_extra_options ? ~0xfc : ~(((0xf00 << (stm32x_info->protection_bits - 12)) | 0xff) & 0xffc); if (user_options & options_mask) { - command_print(CMD_CTX, "stm32f2x invalid user_options"); + command_print(CMD, "stm32f2x invalid user_options"); return ERROR_COMMAND_ARGUMENT_INVALID; } stm32x_info->option_bytes.user_options = user_options; if (stm32x_write_options(bank) != ERROR_OK) { - command_print(CMD_CTX, "stm32f2x failed to write options"); + command_print(CMD, "stm32f2x failed to write options"); return ERROR_OK; } @@ -1649,7 +1649,7 @@ COMMAND_HANDLER(stm32f2x_handle_options_write_command) /* ... and reprogramming of whole flash */ stm32x_info->probed = false; - command_print(CMD_CTX, "stm32f2x write options complete.\n" + command_print(CMD, "stm32f2x write options complete.\n" "INFO: a reset or power cycle is required " "for the new settings to take effect."); return retval; @@ -1663,7 +1663,7 @@ COMMAND_HANDLER(stm32f2x_handle_optcr2_write_command) uint32_t optcr2_pcrop; if (CMD_ARGC != 2) { - command_print(CMD_CTX, "stm32f2x optcr2_write "); + command_print(CMD, "stm32f2x optcr2_write "); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -1673,11 +1673,11 @@ COMMAND_HANDLER(stm32f2x_handle_optcr2_write_command) stm32x_info = bank->driver_priv; if (!stm32x_info->has_optcr2_pcrop) { - command_print(CMD_CTX, "no optcr2 register"); + command_print(CMD, "no optcr2 register"); return ERROR_COMMAND_ARGUMENT_INVALID; } - command_print(CMD_CTX, "INFO: To disable PCROP, set PCROP_RDP" + command_print(CMD, "INFO: To disable PCROP, set PCROP_RDP" " with PCROPi bits STILL SET, then\nlock device and" " finally unlock it. Clears PCROP and mass erases flash."); @@ -1689,18 +1689,18 @@ COMMAND_HANDLER(stm32f2x_handle_optcr2_write_command) stm32x_info->option_bytes.optcr2_pcrop = optcr2_pcrop; if (stm32x_write_options(bank) != ERROR_OK) { - command_print(CMD_CTX, "stm32f2x failed to write options"); + command_print(CMD, "stm32f2x failed to write options"); return ERROR_OK; } - command_print(CMD_CTX, "stm32f2x optcr2_write complete."); + command_print(CMD, "stm32f2x optcr2_write complete."); return retval; } COMMAND_HANDLER(stm32x_handle_otp_command) { if (CMD_ARGC < 2) { - command_print(CMD_CTX, "stm32x otp (enable|disable|show)"); + command_print(CMD, "stm32x otp (enable|disable|show)"); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -1714,7 +1714,7 @@ COMMAND_HANDLER(stm32x_handle_otp_command) } else if (strcmp(CMD_ARGV[1], "disable") == 0) { stm32x_otp_disable(bank); } else if (strcmp(CMD_ARGV[1], "show") == 0) { - command_print(CMD_CTX, + command_print(CMD, "OTP memory bank #%d is %s for write commands.", bank->bank_number, stm32x_is_otp_unlocked(bank) ? "enabled" : "disabled"); @@ -1722,7 +1722,7 @@ COMMAND_HANDLER(stm32x_handle_otp_command) return ERROR_COMMAND_SYNTAX_ERROR; } } else { - command_print(CMD_CTX, "Failed: not an OTP bank."); + command_print(CMD, "Failed: not an OTP bank."); } return retval; diff --git a/src/flash/nor/stm32h7x.c b/src/flash/nor/stm32h7x.c index 90bc8f393d..cb96cf265d 100644 --- a/src/flash/nor/stm32h7x.c +++ b/src/flash/nor/stm32h7x.c @@ -952,7 +952,7 @@ COMMAND_HANDLER(stm32x_handle_lock_command) } if (stm32x_read_options(bank) != ERROR_OK) { - command_print(CMD_CTX, "%s failed to read options", + command_print(CMD, "%s failed to read options", bank->driver->name); return ERROR_OK; } @@ -960,11 +960,11 @@ COMMAND_HANDLER(stm32x_handle_lock_command) stm32x_info->option_bytes.RDP = 0; if (stm32x_write_options(bank) != ERROR_OK) { - command_print(CMD_CTX, "%s failed to lock device", + command_print(CMD, "%s failed to lock device", bank->driver->name); return ERROR_OK; } - command_print(CMD_CTX, "%s locked", bank->driver->name); + command_print(CMD, "%s locked", bank->driver->name); return ERROR_OK; } @@ -998,7 +998,7 @@ COMMAND_HANDLER(stm32x_handle_unlock_command) } if (stm32x_read_options(bank) != ERROR_OK) { - command_print(CMD_CTX, "%s failed to read options", bank->driver->name); + command_print(CMD, "%s failed to read options", bank->driver->name); return ERROR_OK; } @@ -1007,10 +1007,10 @@ COMMAND_HANDLER(stm32x_handle_unlock_command) stm32x_info->option_bytes.RDP = 0xAA; if (stm32x_write_options(bank) != ERROR_OK) { - command_print(CMD_CTX, "%s failed to unlock device", bank->driver->name); + command_print(CMD, "%s failed to unlock device", bank->driver->name); return ERROR_OK; } - command_print(CMD_CTX, "%s unlocked.\n", bank->driver->name); + command_print(CMD, "%s unlocked.\n", bank->driver->name); return ERROR_OK; } @@ -1056,7 +1056,7 @@ COMMAND_HANDLER(stm32x_handle_mass_erase_command) int i; if (CMD_ARGC < 1) { - command_print(CMD_CTX, "stm32h7x mass_erase "); + command_print(CMD, "stm32h7x mass_erase "); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -1071,9 +1071,9 @@ COMMAND_HANDLER(stm32x_handle_mass_erase_command) for (i = 0; i < bank->num_sectors; i++) bank->sectors[i].is_erased = 1; - command_print(CMD_CTX, "stm32h7x mass erase complete"); + command_print(CMD, "stm32h7x mass erase complete"); } else { - command_print(CMD_CTX, "stm32h7x mass erase failed"); + command_print(CMD, "stm32h7x mass erase failed"); } return retval; diff --git a/src/flash/nor/stm32l4x.c b/src/flash/nor/stm32l4x.c index 3d4303beed..f680542c7e 100644 --- a/src/flash/nor/stm32l4x.c +++ b/src/flash/nor/stm32l4x.c @@ -835,7 +835,7 @@ COMMAND_HANDLER(stm32l4_handle_mass_erase_command) uint32_t action; if (CMD_ARGC < 1) { - command_print(CMD_CTX, "stm32l4x mass_erase "); + command_print(CMD, "stm32l4x mass_erase "); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -851,9 +851,9 @@ COMMAND_HANDLER(stm32l4_handle_mass_erase_command) for (i = 0; i < bank->num_sectors; i++) bank->sectors[i].is_erased = 1; - command_print(CMD_CTX, "stm32l4x mass erase complete"); + command_print(CMD, "stm32l4x mass erase complete"); } else { - command_print(CMD_CTX, "stm32l4x mass erase failed"); + command_print(CMD, "stm32l4x mass erase failed"); } return retval; @@ -862,7 +862,7 @@ COMMAND_HANDLER(stm32l4_handle_mass_erase_command) COMMAND_HANDLER(stm32l4_handle_option_read_command) { if (CMD_ARGC < 2) { - command_print(CMD_CTX, "stm32l4x option_read "); + command_print(CMD, "stm32l4x option_read "); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -880,7 +880,7 @@ COMMAND_HANDLER(stm32l4_handle_option_read_command) if (ERROR_OK != retval) return retval; - command_print(CMD_CTX, "Option Register: <0x%" PRIx32 "> = 0x%" PRIx32 "", reg_addr, value); + command_print(CMD, "Option Register: <0x%" PRIx32 "> = 0x%" PRIx32 "", reg_addr, value); return retval; } @@ -888,7 +888,7 @@ COMMAND_HANDLER(stm32l4_handle_option_read_command) COMMAND_HANDLER(stm32l4_handle_option_write_command) { if (CMD_ARGC < 3) { - command_print(CMD_CTX, "stm32l4x option_write [mask]"); + command_print(CMD, "stm32l4x option_write [mask]"); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -906,7 +906,7 @@ COMMAND_HANDLER(stm32l4_handle_option_write_command) if (CMD_ARGC > 3) mask = strtoul(CMD_ARGV[3], NULL, 16); - command_print(CMD_CTX, "%s Option written.\n" + command_print(CMD, "%s Option written.\n" "INFO: a reset or power cycle is required " "for the new settings to take effect.", bank->driver->name); @@ -937,7 +937,7 @@ COMMAND_HANDLER(stm32l4_handle_option_load_command) /* Write the OBLLAUNCH bit in CR -> Cause device "POR" and option bytes reload */ retval = target_write_u32(target, stm32l4_get_flash_reg(bank, STM32_FLASH_CR), FLASH_OBLLAUNCH); - command_print(CMD_CTX, "stm32l4x option load (POR) completed."); + command_print(CMD, "stm32l4x option load (POR) completed."); return retval; } @@ -962,7 +962,7 @@ COMMAND_HANDLER(stm32l4_handle_lock_command) /* set readout protection level 1 by erasing the RDP option byte */ if (stm32l4_write_option(bank, STM32_FLASH_OPTR, 0, 0x000000FF) != ERROR_OK) { - command_print(CMD_CTX, "%s failed to lock device", bank->driver->name); + command_print(CMD, "%s failed to lock device", bank->driver->name); return ERROR_OK; } @@ -989,7 +989,7 @@ COMMAND_HANDLER(stm32l4_handle_unlock_command) } if (stm32l4_write_option(bank, STM32_FLASH_OPTR, RDP_LEVEL_0, 0x000000FF) != ERROR_OK) { - command_print(CMD_CTX, "%s failed to unlock device", bank->driver->name); + command_print(CMD, "%s failed to unlock device", bank->driver->name); return ERROR_OK; } diff --git a/src/flash/nor/stm32lx.c b/src/flash/nor/stm32lx.c index 27780103ee..e6473f8c26 100644 --- a/src/flash/nor/stm32lx.c +++ b/src/flash/nor/stm32lx.c @@ -324,9 +324,9 @@ COMMAND_HANDLER(stm32lx_handle_mass_erase_command) for (i = 0; i < bank->num_sectors; i++) bank->sectors[i].is_erased = 1; - command_print(CMD_CTX, "stm32lx mass erase complete"); + command_print(CMD, "stm32lx mass erase complete"); } else { - command_print(CMD_CTX, "stm32lx mass erase failed"); + command_print(CMD, "stm32lx mass erase failed"); } return retval; @@ -345,9 +345,9 @@ COMMAND_HANDLER(stm32lx_handle_lock_command) retval = stm32lx_lock(bank); if (retval == ERROR_OK) - command_print(CMD_CTX, "STM32Lx locked, takes effect after power cycle."); + command_print(CMD, "STM32Lx locked, takes effect after power cycle."); else - command_print(CMD_CTX, "STM32Lx lock failed"); + command_print(CMD, "STM32Lx lock failed"); return retval; } @@ -365,9 +365,9 @@ COMMAND_HANDLER(stm32lx_handle_unlock_command) retval = stm32lx_unlock(bank); if (retval == ERROR_OK) - command_print(CMD_CTX, "STM32Lx unlocked, takes effect after power cycle."); + command_print(CMD, "STM32Lx unlocked, takes effect after power cycle."); else - command_print(CMD_CTX, "STM32Lx unlock failed"); + command_print(CMD, "STM32Lx unlock failed"); return retval; } diff --git a/src/flash/nor/str9xpec.c b/src/flash/nor/str9xpec.c index 37d805344c..6e1ecf3476 100644 --- a/src/flash/nor/str9xpec.c +++ b/src/flash/nor/str9xpec.c @@ -746,7 +746,7 @@ COMMAND_HANDLER(str9xpec_handle_part_id_command) idcode = buf_get_u32(buffer, 0, 32); - command_print(CMD_CTX, "str9xpec part id: 0x%8.8" PRIx32 "", idcode); + command_print(CMD, "str9xpec part id: 0x%8.8" PRIx32 "", idcode); free(buffer); @@ -780,33 +780,33 @@ COMMAND_HANDLER(str9xpec_handle_flash_options_read_command) /* boot bank */ if (buf_get_u32(str9xpec_info->options, STR9XPEC_OPT_CSMAPBIT, 1)) - command_print(CMD_CTX, "CS Map: bank1"); + command_print(CMD, "CS Map: bank1"); else - command_print(CMD_CTX, "CS Map: bank0"); + command_print(CMD, "CS Map: bank0"); /* OTP lock */ if (buf_get_u32(str9xpec_info->options, STR9XPEC_OPT_OTPBIT, 1)) - command_print(CMD_CTX, "OTP Lock: OTP Locked"); + command_print(CMD, "OTP Lock: OTP Locked"); else - command_print(CMD_CTX, "OTP Lock: OTP Unlocked"); + command_print(CMD, "OTP Lock: OTP Unlocked"); /* LVD Threshold */ if (buf_get_u32(str9xpec_info->options, STR9XPEC_OPT_LVDTHRESBIT, 1)) - command_print(CMD_CTX, "LVD Threshold: 2.7v"); + command_print(CMD, "LVD Threshold: 2.7v"); else - command_print(CMD_CTX, "LVD Threshold: 2.4v"); + command_print(CMD, "LVD Threshold: 2.4v"); /* LVD reset warning */ if (buf_get_u32(str9xpec_info->options, STR9XPEC_OPT_LVDWARNBIT, 1)) - command_print(CMD_CTX, "LVD Reset Warning: VDD or VDDQ Inputs"); + command_print(CMD, "LVD Reset Warning: VDD or VDDQ Inputs"); else - command_print(CMD_CTX, "LVD Reset Warning: VDD Input Only"); + command_print(CMD, "LVD Reset Warning: VDD Input Only"); /* LVD reset select */ if (buf_get_u32(str9xpec_info->options, STR9XPEC_OPT_LVDSELBIT, 1)) - command_print(CMD_CTX, "LVD Reset Selection: VDD or VDDQ Inputs"); + command_print(CMD, "LVD Reset Selection: VDD or VDDQ Inputs"); else - command_print(CMD_CTX, "LVD Reset Selection: VDD Input Only"); + command_print(CMD, "LVD Reset Selection: VDD Input Only"); return ERROR_OK; } @@ -885,7 +885,7 @@ COMMAND_HANDLER(str9xpec_handle_flash_options_write_command) if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS) return ERROR_FLASH_OPERATION_FAILED; - command_print(CMD_CTX, "str9xpec write options complete.\n" + command_print(CMD, "str9xpec write options complete.\n" "INFO: a reset or power cycle is required " "for the new settings to take effect."); @@ -1017,7 +1017,7 @@ COMMAND_HANDLER(str9xpec_handle_flash_unlock_command) if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS) return ERROR_FLASH_OPERATION_FAILED; - command_print(CMD_CTX, "str9xpec unlocked.\n" + command_print(CMD, "str9xpec unlocked.\n" "INFO: a reset or power cycle is required " "for the new settings to take effect."); @@ -1045,19 +1045,19 @@ COMMAND_HANDLER(str9xpec_handle_flash_enable_turbo_command) tap0 = str9xpec_info->tap; if (tap0 == NULL) { /* things are *WRONG* */ - command_print(CMD_CTX, "**STR9FLASH** (tap0) invalid chain?"); + command_print(CMD, "**STR9FLASH** (tap0) invalid chain?"); return ERROR_FAIL; } tap1 = tap0->next_tap; if (tap1 == NULL) { /* things are *WRONG* */ - command_print(CMD_CTX, "**STR9FLASH** (tap1) invalid chain?"); + command_print(CMD, "**STR9FLASH** (tap1) invalid chain?"); return ERROR_FAIL; } tap2 = tap1->next_tap; if (tap2 == NULL) { /* things are *WRONG* */ - command_print(CMD_CTX, "**STR9FLASH** (tap2) invalid chain?"); + command_print(CMD, "**STR9FLASH** (tap2) invalid chain?"); return ERROR_FAIL; } diff --git a/src/flash/nor/tcl.c b/src/flash/nor/tcl.c index 87d599a59c..0daa531b8f 100644 --- a/src/flash/nor/tcl.c +++ b/src/flash/nor/tcl.c @@ -111,7 +111,7 @@ COMMAND_HANDLER(handle_flash_info_command) if (retval == ERROR_FLASH_OPER_UNSUPPORTED) LOG_WARNING("Flash protection check is not implemented."); - command_print(CMD_CTX, + command_print(CMD, "#%d : %s at " TARGET_ADDR_FMT ", size 0x%8.8" PRIx32 ", buswidth %i, chipwidth %i", p->bank_number, @@ -140,7 +140,7 @@ COMMAND_HANDLER(handle_flash_info_command) else if (!show_sectors || !prot_block_available) protect_state = "protection state unknown"; - command_print(CMD_CTX, + command_print(CMD, "\t#%3i: 0x%8.8" PRIx32 " (0x%" PRIx32 " %" PRIi32 "kB) %s", j, block_array[j].offset, @@ -152,7 +152,7 @@ COMMAND_HANDLER(handle_flash_info_command) if (p->driver->info != NULL) { retval = p->driver->info(p, buf, sizeof(buf)); if (retval == ERROR_OK) - command_print(CMD_CTX, "%s", buf); + command_print(CMD, "%s", buf); else LOG_ERROR("error retrieving flash info"); } @@ -176,12 +176,12 @@ COMMAND_HANDLER(handle_flash_probe_command) if (p) { retval = p->driver->probe(p); if (retval == ERROR_OK) - command_print(CMD_CTX, + command_print(CMD, "flash '%s' found at " TARGET_ADDR_FMT, p->driver->name, p->base); } else { - command_print(CMD_CTX, "flash bank '#%s' is out of bounds", CMD_ARGV[0]); + command_print(CMD, "flash bank '#%s' is out of bounds", CMD_ARGV[0]); retval = ERROR_FAIL; } @@ -202,9 +202,9 @@ COMMAND_HANDLER(handle_flash_erase_check_command) int j; retval = p->driver->erase_check(p); if (retval == ERROR_OK) - command_print(CMD_CTX, "successfully checked erase state"); + command_print(CMD, "successfully checked erase state"); else { - command_print(CMD_CTX, + command_print(CMD, "unknown error when checking erase state of flash bank #%s at " TARGET_ADDR_FMT, CMD_ARGV[0], @@ -222,7 +222,7 @@ COMMAND_HANDLER(handle_flash_erase_check_command) erase_state = "erase state unknown"; blank = false; - command_print(CMD_CTX, + command_print(CMD, "\t#%3i: 0x%8.8" PRIx32 " (0x%" PRIx32 " %" PRIi32 "kB) %s", j, p->sectors[j].offset, @@ -232,7 +232,7 @@ COMMAND_HANDLER(handle_flash_erase_check_command) } if (blank) - command_print(CMD_CTX, "\tBank is erased"); + command_print(CMD, "\tBank is erased"); return retval; } @@ -267,7 +267,7 @@ COMMAND_HANDLER(handle_flash_erase_address_command) COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], length); if (length <= 0) { - command_print(CMD_CTX, "Length must be >0"); + command_print(CMD, "Length must be >0"); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -289,7 +289,7 @@ COMMAND_HANDLER(handle_flash_erase_address_command) retval = flash_erase_address_range(target, do_pad, address, length); if ((ERROR_OK == retval) && (duration_measure(&bench) == ERROR_OK)) { - command_print(CMD_CTX, "erased address " TARGET_ADDR_FMT " (length %" + command_print(CMD, "erased address " TARGET_ADDR_FMT " (length %" PRIi32 ")" " in %fs (%0.3f KiB/s)", address, length, duration_elapsed(&bench), duration_kbps(&bench, length)); @@ -320,13 +320,13 @@ COMMAND_HANDLER(handle_flash_erase_command) COMMAND_PARSE_NUMBER(u32, CMD_ARGV[2], last); if (!(first <= last)) { - command_print(CMD_CTX, "ERROR: " + command_print(CMD, "ERROR: " "first sector must be <= last"); return ERROR_FAIL; } if (!(last <= (uint32_t)(p->num_sectors - 1))) { - command_print(CMD_CTX, "ERROR: " + command_print(CMD, "ERROR: " "last sector must be <= %" PRIu32, p->num_sectors - 1); return ERROR_FAIL; @@ -338,7 +338,7 @@ COMMAND_HANDLER(handle_flash_erase_command) retval = flash_driver_erase(p, first, last); if ((ERROR_OK == retval) && (duration_measure(&bench) == ERROR_OK)) { - command_print(CMD_CTX, "erased sectors %" PRIu32 " " + command_print(CMD, "erased sectors %" PRIu32 " " "through %" PRIu32 " on flash bank %d " "in %fs", first, last, p->bank_number, duration_elapsed(&bench)); } @@ -377,14 +377,14 @@ COMMAND_HANDLER(handle_flash_protect_command) COMMAND_PARSE_ON_OFF(CMD_ARGV[3], set); if (!(first <= last)) { - command_print(CMD_CTX, "ERROR: " + command_print(CMD, "ERROR: " "first %s must be <= last", (p->num_prot_blocks) ? "block" : "sector"); return ERROR_FAIL; } if (!(last <= (uint32_t)(num_blocks - 1))) { - command_print(CMD_CTX, "ERROR: " + command_print(CMD, "ERROR: " "last %s must be <= %" PRIu32, (p->num_prot_blocks) ? "block" : "sector", num_blocks - 1); @@ -393,7 +393,7 @@ COMMAND_HANDLER(handle_flash_protect_command) retval = flash_driver_protect(p, set, first, last); if (retval == ERROR_OK) { - command_print(CMD_CTX, "%s protection for %s %" PRIu32 + command_print(CMD, "%s protection for %s %" PRIu32 " through %" PRIu32 " on flash bank %d", (set) ? "set" : "cleared", (p->num_prot_blocks) ? "blocks" : "sectors", @@ -421,12 +421,12 @@ COMMAND_HANDLER(handle_flash_write_image_command) auto_erase = 1; CMD_ARGV++; CMD_ARGC--; - command_print(CMD_CTX, "auto erase enabled"); + command_print(CMD, "auto erase enabled"); } else if (strcmp(CMD_ARGV[0], "unlock") == 0) { auto_unlock = true; CMD_ARGV++; CMD_ARGC--; - command_print(CMD_CTX, "auto unlock enabled"); + command_print(CMD, "auto unlock enabled"); } else break; } @@ -463,7 +463,7 @@ COMMAND_HANDLER(handle_flash_write_image_command) } if ((ERROR_OK == retval) && (duration_measure(&bench) == ERROR_OK)) { - command_print(CMD_CTX, "wrote %" PRIu32 " bytes from file %s " + command_print(CMD, "wrote %" PRIu32 " bytes from file %s " "in %fs (%0.3f KiB/s)", written, CMD_ARGV[0], duration_elapsed(&bench), duration_kbps(&bench, written)); } @@ -602,7 +602,7 @@ COMMAND_HANDLER(handle_flash_fill_command) } if ((retval == ERROR_OK) && (duration_measure(&bench) == ERROR_OK)) { - command_print(CMD_CTX, "wrote %" PRIu32 " bytes to " TARGET_ADDR_FMT + command_print(CMD, "wrote %" PRIu32 " bytes to " TARGET_ADDR_FMT " in %fs (%0.3f KiB/s)", size_bytes, address, duration_elapsed(&bench), duration_kbps(&bench, size_bytes)); } @@ -716,7 +716,7 @@ COMMAND_HANDLER(handle_flash_write_bank_command) free(buffer); if ((ERROR_OK == retval) && (duration_measure(&bench) == ERROR_OK)) { - command_print(CMD_CTX, "wrote %zu bytes from file %s to flash bank %u" + command_print(CMD, "wrote %zu bytes from file %s to flash bank %u" " at offset 0x%8.8" PRIx32 " in %fs (%0.3f KiB/s)", length, CMD_ARGV[1], bank->bank_number, offset, duration_elapsed(&bench), duration_kbps(&bench, length)); @@ -798,7 +798,7 @@ COMMAND_HANDLER(handle_flash_read_bank_command) } if (duration_measure(&bench) == ERROR_OK) - command_print(CMD_CTX, "wrote %zd bytes to file %s from flash bank %u" + command_print(CMD, "wrote %zd bytes to file %s from flash bank %u" " at offset 0x%8.8" PRIx32 " in %fs (%0.3f KiB/s)", written, CMD_ARGV[1], p->bank_number, offset, duration_elapsed(&bench), duration_kbps(&bench, written)); @@ -900,23 +900,23 @@ COMMAND_HANDLER(handle_flash_verify_bank_command) } if (duration_measure(&bench) == ERROR_OK) - command_print(CMD_CTX, "read %zd bytes from file %s and flash bank %u" + command_print(CMD, "read %zd bytes from file %s and flash bank %u" " at offset 0x%8.8" PRIx32 " in %fs (%0.3f KiB/s)", length, CMD_ARGV[1], p->bank_number, offset, duration_elapsed(&bench), duration_kbps(&bench, length)); differ = memcmp(buffer_file, buffer_flash, length); - command_print(CMD_CTX, "contents %s", differ ? "differ" : "match"); + command_print(CMD, "contents %s", differ ? "differ" : "match"); if (differ) { uint32_t t; int diffs = 0; for (t = 0; t < length; t++) { if (buffer_flash[t] == buffer_file[t]) continue; - command_print(CMD_CTX, "diff %d address 0x%08x. Was 0x%02x instead of 0x%02x", + command_print(CMD, "diff %d address 0x%08x. Was 0x%02x instead of 0x%02x", diffs, t + offset, buffer_flash[t], buffer_file[t]); if (diffs++ >= 127) { - command_print(CMD_CTX, "More than 128 errors, the rest are not printed."); + command_print(CMD, "More than 128 errors, the rest are not printed."); break; } keep_alive(); @@ -952,7 +952,7 @@ COMMAND_HANDLER(handle_flash_padded_value_command) COMMAND_PARSE_NUMBER(u8, CMD_ARGV[1], p->default_padded_value); - command_print(CMD_CTX, "Default padded value set to 0x%" PRIx8 " for flash bank %u", \ + command_print(CMD, "Default padded value set to 0x%" PRIx8 " for flash bank %u", \ p->default_padded_value, p->bank_number); return retval; diff --git a/src/flash/nor/tms470.c b/src/flash/nor/tms470.c index 195d1ae1f2..90557b8f16 100644 --- a/src/flash/nor/tms470.c +++ b/src/flash/nor/tms470.c @@ -301,7 +301,7 @@ COMMAND_HANDLER(tms470_handle_flash_keyset_command) int start = (0 == strncmp(CMD_ARGV[i], "0x", 2)) ? 2 : 0; if (1 != sscanf(&CMD_ARGV[i][start], "%" SCNx32 "", &flashKeys[i])) { - command_print(CMD_CTX, "could not process flash key %s", + command_print(CMD, "could not process flash key %s", CMD_ARGV[i]); LOG_ERROR("could not process flash key %s", CMD_ARGV[i]); return ERROR_COMMAND_SYNTAX_ERROR; @@ -310,19 +310,19 @@ COMMAND_HANDLER(tms470_handle_flash_keyset_command) keysSet = 1; } else if (CMD_ARGC != 0) { - command_print(CMD_CTX, "tms470 flash_keyset "); + command_print(CMD, "tms470 flash_keyset "); return ERROR_COMMAND_SYNTAX_ERROR; } if (keysSet) { - command_print(CMD_CTX, + command_print(CMD, "using flash keys 0x%08" PRIx32 ", 0x%08" PRIx32 ", 0x%08" PRIx32 ", 0x%08" PRIx32 "", flashKeys[0], flashKeys[1], flashKeys[2], flashKeys[3]); } else - command_print(CMD_CTX, "flash keys not set"); + command_print(CMD, "flash keys not set"); return ERROR_OK; } @@ -352,12 +352,12 @@ COMMAND_HANDLER(tms470_handle_osc_megahertz_command) if (oscMHz <= 0) { LOG_ERROR("osc_megahertz must be positive and non-zero!"); - command_print(CMD_CTX, "osc_megahertz must be positive and non-zero!"); + command_print(CMD, "osc_megahertz must be positive and non-zero!"); oscMHz = 12; return ERROR_COMMAND_SYNTAX_ERROR; } - command_print(CMD_CTX, "osc_megahertz=%d", oscMHz); + command_print(CMD, "osc_megahertz=%d", oscMHz); return ERROR_OK; } @@ -375,7 +375,7 @@ COMMAND_HANDLER(tms470_handle_plldis_command) plldis = plldis ? 1 : 0; } - command_print(CMD_CTX, "plldis=%d", plldis); + command_print(CMD, "plldis=%d", plldis); return ERROR_OK; } diff --git a/src/flash/nor/xmc4xxx.c b/src/flash/nor/xmc4xxx.c index d85be6214d..d6a1ad453f 100644 --- a/src/flash/nor/xmc4xxx.c +++ b/src/flash/nor/xmc4xxx.c @@ -1284,9 +1284,9 @@ COMMAND_HANDLER(xmc4xxx_handle_flash_password_command) fb->pw_set = true; - command_print(CMD_CTX, "XMC4xxx flash passwords set to:\n"); - command_print(CMD_CTX, "-0x%08"PRIx32"\n", fb->pw1); - command_print(CMD_CTX, "-0x%08"PRIx32"\n", fb->pw2); + command_print(CMD, "XMC4xxx flash passwords set to:\n"); + command_print(CMD, "-0x%08"PRIx32"\n", fb->pw1); + command_print(CMD, "-0x%08"PRIx32"\n", fb->pw2); return ERROR_OK; } diff --git a/src/hello.c b/src/hello.c index 2afbba3a3e..a1c00c0ddf 100644 --- a/src/hello.c +++ b/src/hello.c @@ -89,7 +89,7 @@ COMMAND_HANDLER(handle_hello_command) const char *sep, *name; int retval = CALL_COMMAND_HANDLER(handle_hello_args, &sep, &name); if (ERROR_OK == retval) - command_print(CMD_CTX, "Greetings%s%s!", sep, name); + command_print(CMD, "Greetings%s%s!", sep, name); return retval; } diff --git a/src/helper/command.c b/src/helper/command.c index aadc072fa0..be131bb3b9 100644 --- a/src/helper/command.c +++ b/src/helper/command.c @@ -502,7 +502,7 @@ void command_output_text(struct command_context *context, const char *data) context->output_handler(context, data); } -void command_print_sameline(struct command_context *context, const char *format, ...) +void command_print_sameline(struct command_invocation *cmd, const char *format, ...) { char *string; @@ -525,7 +525,7 @@ void command_print_sameline(struct command_context *context, const char *format, va_end(ap); } -void command_print(struct command_context *context, const char *format, ...) +void command_print(struct command_invocation *cmd, const char *format, ...) { char *string; diff --git a/src/helper/command.h b/src/helper/command.h index 9aed2827c3..41cdc0b9d2 100644 --- a/src/helper/command.h +++ b/src/helper/command.h @@ -353,9 +353,9 @@ struct command_context *copy_command_context(struct command_context *cmd_ctx); */ void command_done(struct command_context *context); -void command_print(struct command_context *context, const char *format, ...) +void command_print(struct command_invocation *cmd, const char *format, ...) __attribute__ ((format (PRINTF_ATTRIBUTE_FORMAT, 2, 3))); -void command_print_sameline(struct command_context *context, const char *format, ...) +void command_print_sameline(struct command_invocation *cmd, const char *format, ...) __attribute__ ((format (PRINTF_ATTRIBUTE_FORMAT, 2, 3))); int command_run_line(struct command_context *context, char *line); int command_run_linef(struct command_context *context, const char *format, ...) @@ -409,7 +409,7 @@ DECLARE_PARSE_WRAPPER(_target_addr, target_addr_t); do { \ int retval_macro_tmp = parse_ ## type(in, &(out)); \ if (ERROR_OK != retval_macro_tmp) { \ - command_print(CMD_CTX, stringify(out) \ + command_print(CMD, stringify(out) \ " option value ('%s') is not valid", in); \ return retval_macro_tmp; \ } \ @@ -429,9 +429,9 @@ DECLARE_PARSE_WRAPPER(_target_addr, target_addr_t); bool value; \ int retval_macro_tmp = command_parse_bool_arg(in, &value); \ if (ERROR_OK != retval_macro_tmp) { \ - command_print(CMD_CTX, stringify(out) \ + command_print(CMD, stringify(out) \ " option value ('%s') is not valid", in); \ - command_print(CMD_CTX, " choices are '%s' or '%s'", \ + command_print(CMD, " choices are '%s' or '%s'", \ on, off); \ return retval_macro_tmp; \ } \ diff --git a/src/helper/ioutil.c b/src/helper/ioutil.c index a48879905a..d4f39e242b 100644 --- a/src/helper/ioutil.c +++ b/src/helper/ioutil.c @@ -113,10 +113,10 @@ COMMAND_HANDLER(handle_cat_command) int retval = load_file(CMD_ARGV[0], &data, &len); if (retval == ERROR_OK) { - command_print(CMD_CTX, "%s", data); + command_print(CMD, "%s", data); free(data); } else - command_print(CMD_CTX, "%s not found", CMD_ARGV[0]); + command_print(CMD, "%s not found", CMD_ARGV[0]); return ERROR_OK; } @@ -146,10 +146,10 @@ COMMAND_HANDLER(handle_meminfo_command) info = mallinfo(); if (prev > 0) - command_print(CMD_CTX, "Diff: %d", prev - info.fordblks); + command_print(CMD, "Diff: %d", prev - info.fordblks); prev = info.fordblks; - command_print(CMD_CTX, "Available ram: %d", info.fordblks); + command_print(CMD, "Available ram: %d", info.fordblks); return ERROR_OK; } @@ -217,7 +217,7 @@ COMMAND_HANDLER(handle_cp_command) if (retval != ERROR_OK) break; - command_print(CMD_CTX, "%zu", len - pos); + command_print(CMD, "%zu", len - pos); pos += chunk; @@ -226,9 +226,9 @@ COMMAND_HANDLER(handle_cp_command) } if (retval == ERROR_OK) - command_print(CMD_CTX, "Copied %s to %s", CMD_ARGV[0], CMD_ARGV[1]); + command_print(CMD, "Copied %s to %s", CMD_ARGV[0], CMD_ARGV[1]); else - command_print(CMD_CTX, "copy failed"); + command_print(CMD, "copy failed"); if (data != NULL) free(data); diff --git a/src/helper/log.c b/src/helper/log.c index 90653c41d4..d65430c500 100644 --- a/src/helper/log.c +++ b/src/helper/log.c @@ -213,7 +213,7 @@ COMMAND_HANDLER(handle_debug_level_command) } else if (CMD_ARGC > 1) return ERROR_COMMAND_SYNTAX_ERROR; - command_print(CMD_CTX, "debug_level: %i", debug_level); + command_print(CMD, "debug_level: %i", debug_level); return ERROR_OK; } diff --git a/src/jtag/adapter.c b/src/jtag/adapter.c index 24706f5624..0a887ef20d 100644 --- a/src/jtag/adapter.c +++ b/src/jtag/adapter.c @@ -114,10 +114,10 @@ COMMAND_HANDLER(handle_interface_list_command) if (strcmp(CMD_NAME, "interface_list") == 0 && CMD_ARGC > 0) return ERROR_COMMAND_SYNTAX_ERROR; - command_print(CMD_CTX, "The following debug interfaces are available:"); + command_print(CMD, "The following debug interfaces are available:"); for (unsigned i = 0; NULL != jtag_interfaces[i]; i++) { const char *name = jtag_interfaces[i]->name; - command_print(CMD_CTX, "%u: %s", i + 1, name); + command_print(CMD, "%u: %s", i + 1, name); } return ERROR_OK; @@ -394,7 +394,7 @@ next: modes[5] = ""; } - command_print(CMD_CTX, "%s %s%s%s%s%s", + command_print(CMD, "%s %s%s%s%s%s", modes[0], modes[1], modes[2], modes[3], modes[4], modes[5]); @@ -411,7 +411,7 @@ COMMAND_HANDLER(handle_adapter_nsrst_delay_command) jtag_set_nsrst_delay(delay); } - command_print(CMD_CTX, "adapter_nsrst_delay: %u", jtag_get_nsrst_delay()); + command_print(CMD, "adapter_nsrst_delay: %u", jtag_get_nsrst_delay()); return ERROR_OK; } @@ -425,7 +425,7 @@ COMMAND_HANDLER(handle_adapter_nsrst_assert_width_command) jtag_set_nsrst_assert_width(width); } - command_print(CMD_CTX, "adapter_nsrst_assert_width: %u", jtag_get_nsrst_assert_width()); + command_print(CMD, "adapter_nsrst_assert_width: %u", jtag_get_nsrst_assert_width()); return ERROR_OK; } @@ -450,9 +450,9 @@ COMMAND_HANDLER(handle_adapter_khz_command) return retval; if (cur_speed) - command_print(CMD_CTX, "adapter speed: %d kHz", cur_speed); + command_print(CMD, "adapter speed: %d kHz", cur_speed); else - command_print(CMD_CTX, "adapter speed: RCLK - adaptive"); + command_print(CMD, "adapter speed: RCLK - adaptive"); return retval; } @@ -464,7 +464,7 @@ COMMAND_HANDLER(handle_usb_location_command) if (CMD_ARGC == 1) jtag_usb_set_location(CMD_ARGV[0]); - command_print(CMD_CTX, "adapter usb location: %s", jtag_usb_get_location()); + command_print(CMD, "adapter usb location: %s", jtag_usb_get_location()); return ERROR_OK; } diff --git a/src/jtag/aice/aice_interface.c b/src/jtag/aice/aice_interface.c index c758bb43b9..2aac5e93ac 100644 --- a/src/jtag/aice/aice_interface.c +++ b/src/jtag/aice/aice_interface.c @@ -269,10 +269,10 @@ COMMAND_HANDLER(aice_handle_aice_info_command) { LOG_DEBUG("aice_handle_aice_info_command"); - command_print(CMD_CTX, "Description: %s", param.device_desc); - command_print(CMD_CTX, "Serial number: %s", param.serial); + command_print(CMD, "Description: %s", param.device_desc); + command_print(CMD, "Serial number: %s", param.serial); if (strncmp(aice_port->name, "aice_pipe", 9) == 0) - command_print(CMD_CTX, "Adapter: %s", param.adapter_name); + command_print(CMD, "Adapter: %s", param.adapter_name); return ERROR_OK; } diff --git a/src/jtag/aice/aice_transport.c b/src/jtag/aice/aice_transport.c index 06583183d2..15ebcac972 100644 --- a/src/jtag/aice/aice_transport.c +++ b/src/jtag/aice/aice_transport.c @@ -165,9 +165,9 @@ COMMAND_HANDLER(handle_scan_chain_command) aice_scan_jtag_chain(); tap = jtag_all_taps(); - command_print(CMD_CTX, + command_print(CMD, " TapName Enabled IdCode Expected IrLen IrCap IrMask"); - command_print(CMD_CTX, + command_print(CMD, "-- ------------------- -------- ---------- ---------- ----- ----- ------"); while (tap) { @@ -183,7 +183,7 @@ COMMAND_HANDLER(handle_scan_chain_command) expected = buf_get_u32(tap->expected, 0, tap->ir_length); expected_mask = buf_get_u32(tap->expected_mask, 0, tap->ir_length); - command_print(CMD_CTX, + command_print(CMD, "%2d %-18s %c 0x%08x %s %5d 0x%02x 0x%02x", tap->abs_chain_position, tap->dotted_name, @@ -200,7 +200,7 @@ COMMAND_HANDLER(handle_scan_chain_command) if (tap->ignore_version) expected_id[2] = '*'; - command_print(CMD_CTX, + command_print(CMD, " %s", expected_id); } diff --git a/src/jtag/drivers/amt_jtagaccel.c b/src/jtag/drivers/amt_jtagaccel.c index 57c0ce6005..9808e34b73 100644 --- a/src/jtag/drivers/amt_jtagaccel.c +++ b/src/jtag/drivers/amt_jtagaccel.c @@ -548,7 +548,7 @@ COMMAND_HANDLER(amt_jtagaccel_handle_parport_port_command) } } - command_print(CMD_CTX, "parport port = %u", amt_jtagaccel_port); + command_print(CMD, "parport port = %u", amt_jtagaccel_port); return ERROR_OK; } @@ -556,7 +556,7 @@ COMMAND_HANDLER(amt_jtagaccel_handle_parport_port_command) COMMAND_HANDLER(amt_jtagaccel_handle_rtck_command) { if (CMD_ARGC == 0) { - command_print(CMD_CTX, + command_print(CMD, "amt_jtagaccel RTCK feature %s", (rtck_enabled) ? "enabled" : "disabled"); return ERROR_OK; diff --git a/src/jtag/drivers/bcm2835gpio.c b/src/jtag/drivers/bcm2835gpio.c index 926bd89d33..edec4beffd 100644 --- a/src/jtag/drivers/bcm2835gpio.c +++ b/src/jtag/drivers/bcm2835gpio.c @@ -199,7 +199,7 @@ COMMAND_HANDLER(bcm2835gpio_handle_jtag_gpionums) return ERROR_COMMAND_SYNTAX_ERROR; } - command_print(CMD_CTX, + command_print(CMD, "BCM2835 GPIO config: tck = %d, tms = %d, tdi = %d, tdo = %d", tck_gpio, tms_gpio, tdi_gpio, tdo_gpio); @@ -211,7 +211,7 @@ COMMAND_HANDLER(bcm2835gpio_handle_jtag_gpionum_tck) if (CMD_ARGC == 1) COMMAND_PARSE_NUMBER(int, CMD_ARGV[0], tck_gpio); - command_print(CMD_CTX, "BCM2835 GPIO config: tck = %d", tck_gpio); + command_print(CMD, "BCM2835 GPIO config: tck = %d", tck_gpio); return ERROR_OK; } @@ -220,7 +220,7 @@ COMMAND_HANDLER(bcm2835gpio_handle_jtag_gpionum_tms) if (CMD_ARGC == 1) COMMAND_PARSE_NUMBER(int, CMD_ARGV[0], tms_gpio); - command_print(CMD_CTX, "BCM2835 GPIO config: tms = %d", tms_gpio); + command_print(CMD, "BCM2835 GPIO config: tms = %d", tms_gpio); return ERROR_OK; } @@ -229,7 +229,7 @@ COMMAND_HANDLER(bcm2835gpio_handle_jtag_gpionum_tdo) if (CMD_ARGC == 1) COMMAND_PARSE_NUMBER(int, CMD_ARGV[0], tdo_gpio); - command_print(CMD_CTX, "BCM2835 GPIO config: tdo = %d", tdo_gpio); + command_print(CMD, "BCM2835 GPIO config: tdo = %d", tdo_gpio); return ERROR_OK; } @@ -238,7 +238,7 @@ COMMAND_HANDLER(bcm2835gpio_handle_jtag_gpionum_tdi) if (CMD_ARGC == 1) COMMAND_PARSE_NUMBER(int, CMD_ARGV[0], tdi_gpio); - command_print(CMD_CTX, "BCM2835 GPIO config: tdi = %d", tdi_gpio); + command_print(CMD, "BCM2835 GPIO config: tdi = %d", tdi_gpio); return ERROR_OK; } @@ -247,7 +247,7 @@ COMMAND_HANDLER(bcm2835gpio_handle_jtag_gpionum_srst) if (CMD_ARGC == 1) COMMAND_PARSE_NUMBER(int, CMD_ARGV[0], srst_gpio); - command_print(CMD_CTX, "BCM2835 GPIO config: srst = %d", srst_gpio); + command_print(CMD, "BCM2835 GPIO config: srst = %d", srst_gpio); return ERROR_OK; } @@ -256,7 +256,7 @@ COMMAND_HANDLER(bcm2835gpio_handle_jtag_gpionum_trst) if (CMD_ARGC == 1) COMMAND_PARSE_NUMBER(int, CMD_ARGV[0], trst_gpio); - command_print(CMD_CTX, "BCM2835 GPIO config: trst = %d", trst_gpio); + command_print(CMD, "BCM2835 GPIO config: trst = %d", trst_gpio); return ERROR_OK; } @@ -269,7 +269,7 @@ COMMAND_HANDLER(bcm2835gpio_handle_swd_gpionums) return ERROR_COMMAND_SYNTAX_ERROR; } - command_print(CMD_CTX, + command_print(CMD, "BCM2835 GPIO nums: swclk = %d, swdio = %d", swclk_gpio, swdio_gpio); @@ -281,7 +281,7 @@ COMMAND_HANDLER(bcm2835gpio_handle_swd_gpionum_swclk) if (CMD_ARGC == 1) COMMAND_PARSE_NUMBER(int, CMD_ARGV[0], swclk_gpio); - command_print(CMD_CTX, "BCM2835 num: swclk = %d", swclk_gpio); + command_print(CMD, "BCM2835 num: swclk = %d", swclk_gpio); return ERROR_OK; } @@ -290,7 +290,7 @@ COMMAND_HANDLER(bcm2835gpio_handle_swd_gpionum_swdio) if (CMD_ARGC == 1) COMMAND_PARSE_NUMBER(int, CMD_ARGV[0], swdio_gpio); - command_print(CMD_CTX, "BCM2835 num: swdio = %d", swdio_gpio); + command_print(CMD, "BCM2835 num: swdio = %d", swdio_gpio); return ERROR_OK; } diff --git a/src/jtag/drivers/ft232r.c b/src/jtag/drivers/ft232r.c index e16bcdcbfe..0389427d88 100644 --- a/src/jtag/drivers/ft232r.c +++ b/src/jtag/drivers/ft232r.c @@ -442,7 +442,7 @@ COMMAND_HANDLER(ft232r_handle_jtag_nums_command) if (tdo_gpio < 0) return ERROR_COMMAND_SYNTAX_ERROR; - command_print(CMD_CTX, + command_print(CMD, "FT232R nums: TCK = %d %s, TMS = %d %s, TDI = %d %s, TDO = %d %s", tck_gpio, ft232r_bit_number_to_name(tck_gpio), tms_gpio, ft232r_bit_number_to_name(tms_gpio), @@ -462,7 +462,7 @@ COMMAND_HANDLER(ft232r_handle_tck_num_command) if (tck_gpio < 0) return ERROR_COMMAND_SYNTAX_ERROR; - command_print(CMD_CTX, + command_print(CMD, "FT232R num: TCK = %d %s", tck_gpio, ft232r_bit_number_to_name(tck_gpio)); return ERROR_OK; @@ -478,7 +478,7 @@ COMMAND_HANDLER(ft232r_handle_tms_num_command) if (tms_gpio < 0) return ERROR_COMMAND_SYNTAX_ERROR; - command_print(CMD_CTX, + command_print(CMD, "FT232R num: TMS = %d %s", tms_gpio, ft232r_bit_number_to_name(tms_gpio)); return ERROR_OK; @@ -494,7 +494,7 @@ COMMAND_HANDLER(ft232r_handle_tdo_num_command) if (tdo_gpio < 0) return ERROR_COMMAND_SYNTAX_ERROR; - command_print(CMD_CTX, + command_print(CMD, "FT232R num: TDO = %d %s", tdo_gpio, ft232r_bit_number_to_name(tdo_gpio)); return ERROR_OK; @@ -510,7 +510,7 @@ COMMAND_HANDLER(ft232r_handle_tdi_num_command) if (tdi_gpio < 0) return ERROR_COMMAND_SYNTAX_ERROR; - command_print(CMD_CTX, + command_print(CMD, "FT232R num: TDI = %d %s", tdi_gpio, ft232r_bit_number_to_name(tdi_gpio)); return ERROR_OK; @@ -526,7 +526,7 @@ COMMAND_HANDLER(ft232r_handle_trst_num_command) if (ntrst_gpio < 0) return ERROR_COMMAND_SYNTAX_ERROR; - command_print(CMD_CTX, + command_print(CMD, "FT232R num: TRST = %d %s", ntrst_gpio, ft232r_bit_number_to_name(ntrst_gpio)); return ERROR_OK; @@ -542,7 +542,7 @@ COMMAND_HANDLER(ft232r_handle_srst_num_command) if (nsysrst_gpio < 0) return ERROR_COMMAND_SYNTAX_ERROR; - command_print(CMD_CTX, + command_print(CMD, "FT232R num: SRST = %d %s", nsysrst_gpio, ft232r_bit_number_to_name(nsysrst_gpio)); return ERROR_OK; @@ -555,7 +555,7 @@ COMMAND_HANDLER(ft232r_handle_restore_serial_command) else if (CMD_ARGC != 0) return ERROR_COMMAND_SYNTAX_ERROR; - command_print(CMD_CTX, + command_print(CMD, "FT232R restore serial: 0x%04X (%s)", ft232r_restore_bitmode, ft232r_restore_bitmode == 0xFFFF ? "disabled" : "enabled"); diff --git a/src/jtag/drivers/ftdi.c b/src/jtag/drivers/ftdi.c index e7f3c3dcea..00ae8d0e01 100644 --- a/src/jtag/drivers/ftdi.c +++ b/src/jtag/drivers/ftdi.c @@ -930,7 +930,7 @@ COMMAND_HANDLER(ftdi_handle_tdo_sample_edge_command) } n = Jim_Nvp_value2name_simple(nvp_ftdi_jtag_modes, ftdi_jtag_mode); - command_print(CMD_CTX, "ftdi samples TDO on %s edge of TCK", n->name); + command_print(CMD, "ftdi samples TDO on %s edge of TCK", n->name); return ERROR_OK; } diff --git a/src/jtag/drivers/gw16012.c b/src/jtag/drivers/gw16012.c index f6689969af..f91f7ac113 100644 --- a/src/jtag/drivers/gw16012.c +++ b/src/jtag/drivers/gw16012.c @@ -515,7 +515,7 @@ COMMAND_HANDLER(gw16012_handle_parport_port_command) } } - command_print(CMD_CTX, "parport port = %u", gw16012_port); + command_print(CMD, "parport port = %u", gw16012_port); return ERROR_OK; } diff --git a/src/jtag/drivers/imx_gpio.c b/src/jtag/drivers/imx_gpio.c index 8f172c26ce..196d0e4a1a 100644 --- a/src/jtag/drivers/imx_gpio.c +++ b/src/jtag/drivers/imx_gpio.c @@ -221,7 +221,7 @@ COMMAND_HANDLER(imx_gpio_handle_jtag_gpionums) return ERROR_COMMAND_SYNTAX_ERROR; } - command_print(CMD_CTX, + command_print(CMD, "imx_gpio GPIO config: tck = %d, tms = %d, tdi = %d, tdo = %d", tck_gpio, tms_gpio, tdi_gpio, tdo_gpio); @@ -233,7 +233,7 @@ COMMAND_HANDLER(imx_gpio_handle_jtag_gpionum_tck) if (CMD_ARGC == 1) COMMAND_PARSE_NUMBER(int, CMD_ARGV[0], tck_gpio); - command_print(CMD_CTX, "imx_gpio GPIO config: tck = %d", tck_gpio); + command_print(CMD, "imx_gpio GPIO config: tck = %d", tck_gpio); return ERROR_OK; } @@ -242,7 +242,7 @@ COMMAND_HANDLER(imx_gpio_handle_jtag_gpionum_tms) if (CMD_ARGC == 1) COMMAND_PARSE_NUMBER(int, CMD_ARGV[0], tms_gpio); - command_print(CMD_CTX, "imx_gpio GPIO config: tms = %d", tms_gpio); + command_print(CMD, "imx_gpio GPIO config: tms = %d", tms_gpio); return ERROR_OK; } @@ -251,7 +251,7 @@ COMMAND_HANDLER(imx_gpio_handle_jtag_gpionum_tdo) if (CMD_ARGC == 1) COMMAND_PARSE_NUMBER(int, CMD_ARGV[0], tdo_gpio); - command_print(CMD_CTX, "imx_gpio GPIO config: tdo = %d", tdo_gpio); + command_print(CMD, "imx_gpio GPIO config: tdo = %d", tdo_gpio); return ERROR_OK; } @@ -260,7 +260,7 @@ COMMAND_HANDLER(imx_gpio_handle_jtag_gpionum_tdi) if (CMD_ARGC == 1) COMMAND_PARSE_NUMBER(int, CMD_ARGV[0], tdi_gpio); - command_print(CMD_CTX, "imx_gpio GPIO config: tdi = %d", tdi_gpio); + command_print(CMD, "imx_gpio GPIO config: tdi = %d", tdi_gpio); return ERROR_OK; } @@ -269,7 +269,7 @@ COMMAND_HANDLER(imx_gpio_handle_jtag_gpionum_srst) if (CMD_ARGC == 1) COMMAND_PARSE_NUMBER(int, CMD_ARGV[0], srst_gpio); - command_print(CMD_CTX, "imx_gpio GPIO config: srst = %d", srst_gpio); + command_print(CMD, "imx_gpio GPIO config: srst = %d", srst_gpio); return ERROR_OK; } @@ -278,7 +278,7 @@ COMMAND_HANDLER(imx_gpio_handle_jtag_gpionum_trst) if (CMD_ARGC == 1) COMMAND_PARSE_NUMBER(int, CMD_ARGV[0], trst_gpio); - command_print(CMD_CTX, "imx_gpio GPIO config: trst = %d", trst_gpio); + command_print(CMD, "imx_gpio GPIO config: trst = %d", trst_gpio); return ERROR_OK; } @@ -291,7 +291,7 @@ COMMAND_HANDLER(imx_gpio_handle_swd_gpionums) return ERROR_COMMAND_SYNTAX_ERROR; } - command_print(CMD_CTX, + command_print(CMD, "imx_gpio GPIO nums: swclk = %d, swdio = %d", swclk_gpio, swdio_gpio); @@ -303,7 +303,7 @@ COMMAND_HANDLER(imx_gpio_handle_swd_gpionum_swclk) if (CMD_ARGC == 1) COMMAND_PARSE_NUMBER(int, CMD_ARGV[0], swclk_gpio); - command_print(CMD_CTX, "imx_gpio num: swclk = %d", swclk_gpio); + command_print(CMD, "imx_gpio num: swclk = %d", swclk_gpio); return ERROR_OK; } @@ -312,7 +312,7 @@ COMMAND_HANDLER(imx_gpio_handle_swd_gpionum_swdio) if (CMD_ARGC == 1) COMMAND_PARSE_NUMBER(int, CMD_ARGV[0], swdio_gpio); - command_print(CMD_CTX, "imx_gpio num: swdio = %d", swdio_gpio); + command_print(CMD, "imx_gpio num: swdio = %d", swdio_gpio); return ERROR_OK; } diff --git a/src/jtag/drivers/jlink.c b/src/jtag/drivers/jlink.c index 090eeaa640..cc04953cd6 100644 --- a/src/jtag/drivers/jlink.c +++ b/src/jtag/drivers/jlink.c @@ -923,17 +923,17 @@ COMMAND_HANDLER(jlink_usb_command) int tmp; if (CMD_ARGC != 1) { - command_print(CMD_CTX, "Need exactly one argument for jlink usb."); + command_print(CMD, "Need exactly one argument for jlink usb."); return ERROR_COMMAND_SYNTAX_ERROR; } if (sscanf(CMD_ARGV[0], "%i", &tmp) != 1) { - command_print(CMD_CTX, "Invalid USB address: %s.", CMD_ARGV[0]); + command_print(CMD, "Invalid USB address: %s.", CMD_ARGV[0]); return ERROR_FAIL; } if (tmp < JAYLINK_USB_ADDRESS_0 || tmp > JAYLINK_USB_ADDRESS_3) { - command_print(CMD_CTX, "Invalid USB address: %s.", CMD_ARGV[0]); + command_print(CMD, "Invalid USB address: %s.", CMD_ARGV[0]); return ERROR_FAIL; } @@ -950,17 +950,17 @@ COMMAND_HANDLER(jlink_serial_command) int ret; if (CMD_ARGC != 1) { - command_print(CMD_CTX, "Need exactly one argument for jlink serial."); + command_print(CMD, "Need exactly one argument for jlink serial."); return ERROR_COMMAND_SYNTAX_ERROR; } ret = jaylink_parse_serial_number(CMD_ARGV[0], &serial_number); if (ret == JAYLINK_ERR) { - command_print(CMD_CTX, "Invalid serial number: %s.", CMD_ARGV[0]); + command_print(CMD, "Invalid serial number: %s.", CMD_ARGV[0]); return ERROR_FAIL; } else if (ret != JAYLINK_OK) { - command_print(CMD_CTX, "jaylink_parse_serial_number() failed: %s.", + command_print(CMD, "jaylink_parse_serial_number() failed: %s.", jaylink_strerror(ret)); return ERROR_FAIL; } @@ -979,20 +979,20 @@ COMMAND_HANDLER(jlink_handle_hwstatus_command) ret = jaylink_get_hardware_status(devh, &status); if (ret != JAYLINK_OK) { - command_print(CMD_CTX, "jaylink_get_hardware_status() failed: %s.", + command_print(CMD, "jaylink_get_hardware_status() failed: %s.", jaylink_strerror(ret)); return ERROR_FAIL; } - command_print(CMD_CTX, "VTarget = %u.%03u V", + command_print(CMD, "VTarget = %u.%03u V", status.target_voltage / 1000, status.target_voltage % 1000); - command_print(CMD_CTX, "TCK = %u TDI = %u TDO = %u TMS = %u SRST = %u " + command_print(CMD, "TCK = %u TDI = %u TDO = %u TMS = %u SRST = %u " "TRST = %u", status.tck, status.tdi, status.tdo, status.tms, status.tres, status.trst); if (status.target_voltage < 1500) - command_print(CMD_CTX, "Target voltage too low. Check target power."); + command_print(CMD, "Target voltage too low. Check target power."); return ERROR_OK; } @@ -1003,7 +1003,7 @@ COMMAND_HANDLER(jlink_handle_free_memory_command) uint32_t tmp; if (!jaylink_has_cap(caps, JAYLINK_DEV_CAP_GET_FREE_MEMORY)) { - command_print(CMD_CTX, "Retrieval of free memory is not supported by " + command_print(CMD, "Retrieval of free memory is not supported by " "the device."); return ERROR_OK; } @@ -1011,12 +1011,12 @@ COMMAND_HANDLER(jlink_handle_free_memory_command) ret = jaylink_get_free_memory(devh, &tmp); if (ret != JAYLINK_OK) { - command_print(CMD_CTX, "jaylink_get_free_memory() failed: %s.", + command_print(CMD, "jaylink_get_free_memory() failed: %s.", jaylink_strerror(ret)); return ERROR_FAIL; } - command_print(CMD_CTX, "Device has %u bytes of free memory.", tmp); + command_print(CMD, "Device has %u bytes of free memory.", tmp); return ERROR_OK; } @@ -1038,10 +1038,10 @@ COMMAND_HANDLER(jlink_handle_jlink_jtag_command) return ERROR_FAIL; } - command_print(CMD_CTX, "JTAG command version: %i", version); + command_print(CMD, "JTAG command version: %i", version); } else if (CMD_ARGC == 1) { if (sscanf(CMD_ARGV[0], "%i", &tmp) != 1) { - command_print(CMD_CTX, "Invalid argument: %s.", CMD_ARGV[0]); + command_print(CMD, "Invalid argument: %s.", CMD_ARGV[0]); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -1053,11 +1053,11 @@ COMMAND_HANDLER(jlink_handle_jlink_jtag_command) jtag_command_version = JAYLINK_JTAG_VERSION_3; break; default: - command_print(CMD_CTX, "Invalid argument: %s.", CMD_ARGV[0]); + command_print(CMD, "Invalid argument: %s.", CMD_ARGV[0]); return ERROR_COMMAND_SYNTAX_ERROR; } } else { - command_print(CMD_CTX, "Need exactly one argument for jlink jtag."); + command_print(CMD, "Need exactly one argument for jlink jtag."); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -1070,13 +1070,13 @@ COMMAND_HANDLER(jlink_handle_target_power_command) int enable; if (CMD_ARGC != 1) { - command_print(CMD_CTX, "Need exactly one argument for jlink " + command_print(CMD, "Need exactly one argument for jlink " "targetpower."); return ERROR_COMMAND_SYNTAX_ERROR; } if (!jaylink_has_cap(caps, JAYLINK_DEV_CAP_SET_TARGET_POWER)) { - command_print(CMD_CTX, "Target power supply is not supported by the " + command_print(CMD, "Target power supply is not supported by the " "device."); return ERROR_OK; } @@ -1086,14 +1086,14 @@ COMMAND_HANDLER(jlink_handle_target_power_command) } else if (!strcmp(CMD_ARGV[0], "off")) { enable = false; } else { - command_print(CMD_CTX, "Invalid argument: %s.", CMD_ARGV[0]); + command_print(CMD, "Invalid argument: %s.", CMD_ARGV[0]); return ERROR_FAIL; } ret = jaylink_set_target_power(devh, enable); if (ret != JAYLINK_OK) { - command_print(CMD_CTX, "jaylink_set_target_power() failed: %s.", + command_print(CMD, "jaylink_set_target_power() failed: %s.", jaylink_strerror(ret)); return ERROR_FAIL; } @@ -1104,31 +1104,31 @@ COMMAND_HANDLER(jlink_handle_target_power_command) static void show_config_usb_address(struct command_invocation *cmd) { if (config.usb_address != tmp_config.usb_address) - command_print(cmd->ctx, "USB address: %u [%u]", config.usb_address, + command_print(cmd, "USB address: %u [%u]", config.usb_address, tmp_config.usb_address); else - command_print(cmd->ctx, "USB address: %u", config.usb_address); + command_print(cmd, "USB address: %u", config.usb_address); } static void show_config_ip_address(struct command_invocation *cmd) { if (!memcmp(config.ip_address, tmp_config.ip_address, 4)) - command_print(cmd->ctx, "IP address: %d.%d.%d.%d", + command_print(cmd, "IP address: %d.%d.%d.%d", config.ip_address[3], config.ip_address[2], config.ip_address[1], config.ip_address[0]); else - command_print(cmd->ctx, "IP address: %d.%d.%d.%d [%d.%d.%d.%d]", + command_print(cmd, "IP address: %d.%d.%d.%d [%d.%d.%d.%d]", config.ip_address[3], config.ip_address[2], config.ip_address[1], config.ip_address[0], tmp_config.ip_address[3], tmp_config.ip_address[2], tmp_config.ip_address[1], tmp_config.ip_address[0]); if (!memcmp(config.subnet_mask, tmp_config.subnet_mask, 4)) - command_print(cmd->ctx, "Subnet mask: %d.%d.%d.%d", + command_print(cmd, "Subnet mask: %d.%d.%d.%d", config.subnet_mask[3], config.subnet_mask[2], config.subnet_mask[1], config.subnet_mask[0]); else - command_print(cmd->ctx, "Subnet mask: %d.%d.%d.%d [%d.%d.%d.%d]", + command_print(cmd, "Subnet mask: %d.%d.%d.%d [%d.%d.%d.%d]", config.subnet_mask[3], config.subnet_mask[2], config.subnet_mask[1], config.subnet_mask[0], tmp_config.subnet_mask[3], tmp_config.subnet_mask[2], @@ -1138,12 +1138,12 @@ static void show_config_ip_address(struct command_invocation *cmd) static void show_config_mac_address(struct command_invocation *cmd) { if (!memcmp(config.mac_address, tmp_config.mac_address, 6)) - command_print(cmd->ctx, "MAC address: %.02x:%.02x:%.02x:%.02x:%.02x:%.02x", + command_print(cmd, "MAC address: %.02x:%.02x:%.02x:%.02x:%.02x:%.02x", config.mac_address[5], config.mac_address[4], config.mac_address[3], config.mac_address[2], config.mac_address[1], config.mac_address[0]); else - command_print(cmd->ctx, "MAC address: %.02x:%.02x:%.02x:%.02x:%.02x:%.02x " + command_print(cmd, "MAC address: %.02x:%.02x:%.02x:%.02x:%.02x:%.02x " "[%.02x:%.02x:%.02x:%.02x:%.02x:%.02x]", config.mac_address[5], config.mac_address[4], config.mac_address[3], config.mac_address[2], @@ -1169,15 +1169,15 @@ static void show_config_target_power(struct command_invocation *cmd) current_target_power = "on"; if (config.target_power != tmp_config.target_power) - command_print(cmd->ctx, "Target power supply: %s [%s]", target_power, + command_print(cmd, "Target power supply: %s [%s]", target_power, current_target_power); else - command_print(cmd->ctx, "Target power supply: %s", target_power); + command_print(cmd, "Target power supply: %s", target_power); } static void show_config(struct command_invocation *cmd) { - command_print(cmd->ctx, "J-Link device configuration:"); + command_print(cmd, "J-Link device configuration:"); show_config_usb_address(cmd); @@ -1346,7 +1346,7 @@ COMMAND_HANDLER(jlink_handle_config_usb_address_command) uint8_t tmp; if (!jaylink_has_cap(caps, JAYLINK_DEV_CAP_READ_CONFIG)) { - command_print(CMD_CTX, "Reading configuration is not supported by the " + command_print(CMD, "Reading configuration is not supported by the " "device."); return ERROR_OK; } @@ -1355,18 +1355,18 @@ COMMAND_HANDLER(jlink_handle_config_usb_address_command) show_config_usb_address(CMD); } else if (CMD_ARGC == 1) { if (sscanf(CMD_ARGV[0], "%" SCNd8, &tmp) != 1) { - command_print(CMD_CTX, "Invalid USB address: %s.", CMD_ARGV[0]); + command_print(CMD, "Invalid USB address: %s.", CMD_ARGV[0]); return ERROR_FAIL; } if (tmp > JAYLINK_USB_ADDRESS_3) { - command_print(CMD_CTX, "Invalid USB address: %u.", tmp); + command_print(CMD, "Invalid USB address: %u.", tmp); return ERROR_FAIL; } tmp_config.usb_address = tmp; } else { - command_print(CMD_CTX, "Need exactly one argument for jlink config " + command_print(CMD, "Need exactly one argument for jlink config " "usb."); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -1379,13 +1379,13 @@ COMMAND_HANDLER(jlink_handle_config_target_power_command) int enable; if (!jaylink_has_cap(caps, JAYLINK_DEV_CAP_READ_CONFIG)) { - command_print(CMD_CTX, "Reading configuration is not supported by the " + command_print(CMD, "Reading configuration is not supported by the " "device."); return ERROR_OK; } if (!jaylink_has_cap(caps, JAYLINK_DEV_CAP_SET_TARGET_POWER)) { - command_print(CMD_CTX, "Target power supply is not supported by the " + command_print(CMD, "Target power supply is not supported by the " "device."); return ERROR_OK; } @@ -1398,13 +1398,13 @@ COMMAND_HANDLER(jlink_handle_config_target_power_command) } else if (!strcmp(CMD_ARGV[0], "off")) { enable = false; } else { - command_print(CMD_CTX, "Invalid argument: %s.", CMD_ARGV[0]); + command_print(CMD, "Invalid argument: %s.", CMD_ARGV[0]); return ERROR_FAIL; } tmp_config.target_power = enable; } else { - command_print(CMD_CTX, "Need exactly one argument for jlink config " + command_print(CMD, "Need exactly one argument for jlink config " "targetpower."); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -1420,13 +1420,13 @@ COMMAND_HANDLER(jlink_handle_config_mac_address_command) const char *str; if (!jaylink_has_cap(caps, JAYLINK_DEV_CAP_READ_CONFIG)) { - command_print(CMD_CTX, "Reading configuration is not supported by the " + command_print(CMD, "Reading configuration is not supported by the " "device."); return ERROR_OK; } if (!jaylink_has_cap(caps, JAYLINK_DEV_CAP_ETHERNET)) { - command_print(CMD_CTX, "Ethernet connectivity is not supported by the " + command_print(CMD, "Ethernet connectivity is not supported by the " "device."); return ERROR_OK; } @@ -1438,7 +1438,7 @@ COMMAND_HANDLER(jlink_handle_config_mac_address_command) if ((strlen(str) != 17) || (str[2] != ':' || str[5] != ':' || \ str[8] != ':' || str[11] != ':' || str[14] != ':')) { - command_print(CMD_CTX, "Invalid MAC address format."); + command_print(CMD, "Invalid MAC address format."); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -1448,18 +1448,18 @@ COMMAND_HANDLER(jlink_handle_config_mac_address_command) } if (!(addr[0] | addr[1] | addr[2] | addr[3] | addr[4] | addr[5])) { - command_print(CMD_CTX, "Invalid MAC address: zero address."); + command_print(CMD, "Invalid MAC address: zero address."); return ERROR_COMMAND_SYNTAX_ERROR; } if (!(0x01 & addr[0])) { - command_print(CMD_CTX, "Invalid MAC address: multicast address."); + command_print(CMD, "Invalid MAC address: multicast address."); return ERROR_COMMAND_SYNTAX_ERROR; } memcpy(tmp_config.mac_address, addr, sizeof(addr)); } else { - command_print(CMD_CTX, "Need exactly one argument for jlink config " + command_print(CMD, "Need exactly one argument for jlink config " " mac."); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -1508,13 +1508,13 @@ COMMAND_HANDLER(jlink_handle_config_ip_address_command) uint8_t subnet_bits = 24; if (!jaylink_has_cap(caps, JAYLINK_DEV_CAP_READ_CONFIG)) { - command_print(CMD_CTX, "Reading configuration is not supported by the " + command_print(CMD, "Reading configuration is not supported by the " "device."); return ERROR_OK; } if (!jaylink_has_cap(caps, JAYLINK_DEV_CAP_ETHERNET)) { - command_print(CMD_CTX, "Ethernet connectivity is not supported by the " + command_print(CMD, "Ethernet connectivity is not supported by the " "device."); return ERROR_OK; } @@ -1565,19 +1565,19 @@ COMMAND_HANDLER(jlink_handle_config_write_command) int ret; if (!jaylink_has_cap(caps, JAYLINK_DEV_CAP_READ_CONFIG)) { - command_print(CMD_CTX, "Reading configuration is not supported by the " + command_print(CMD, "Reading configuration is not supported by the " "device."); return ERROR_OK; } if (!jaylink_has_cap(caps, JAYLINK_DEV_CAP_WRITE_CONFIG)) { - command_print(CMD_CTX, "Writing configuration is not supported by the " + command_print(CMD, "Writing configuration is not supported by the " "device."); return ERROR_OK; } if (!memcmp(&config, &tmp_config, sizeof(struct device_config))) { - command_print(CMD_CTX, "Operation not performed due to no changes in " + command_print(CMD, "Operation not performed due to no changes in " "the configuration."); return ERROR_OK; } @@ -1602,7 +1602,7 @@ COMMAND_HANDLER(jlink_handle_config_write_command) } memcpy(&tmp_config, &config, sizeof(struct device_config)); - command_print(CMD_CTX, "The new device configuration applies after power " + command_print(CMD, "The new device configuration applies after power " "cycling the J-Link device."); return ERROR_OK; @@ -1611,7 +1611,7 @@ COMMAND_HANDLER(jlink_handle_config_write_command) COMMAND_HANDLER(jlink_handle_config_command) { if (!jaylink_has_cap(caps, JAYLINK_DEV_CAP_READ_CONFIG)) { - command_print(CMD_CTX, "Device doesn't support reading configuration."); + command_print(CMD, "Device doesn't support reading configuration."); return ERROR_OK; } @@ -1732,7 +1732,7 @@ COMMAND_HANDLER(jlink_handle_emucom_read_command) return ERROR_FAIL; } - command_print(CMD_CTX, "%s", buf + length); + command_print(CMD, "%s", buf + length); free(buf); return ERROR_OK; diff --git a/src/jtag/drivers/opendous.c b/src/jtag/drivers/opendous.c index cec453dd98..2f8b524f7c 100644 --- a/src/jtag/drivers/opendous.c +++ b/src/jtag/drivers/opendous.c @@ -185,7 +185,7 @@ COMMAND_HANDLER(opendous_handle_opendous_hw_jtag_command) { switch (CMD_ARGC) { case 0: - command_print(CMD_CTX, "opendous hw jtag %i", opendous_hw_jtag_version); + command_print(CMD, "opendous hw jtag %i", opendous_hw_jtag_version); break; case 1: { diff --git a/src/jtag/drivers/parport.c b/src/jtag/drivers/parport.c index 14fa9df9f7..0e7992fe9a 100644 --- a/src/jtag/drivers/parport.c +++ b/src/jtag/drivers/parport.c @@ -413,7 +413,7 @@ COMMAND_HANDLER(parport_handle_parport_port_command) } } - command_print(CMD_CTX, "parport port = 0x%" PRIx16 "", parport_port); + command_print(CMD, "parport port = 0x%" PRIx16 "", parport_port); return ERROR_OK; } @@ -470,7 +470,7 @@ COMMAND_HANDLER(parport_handle_parport_toggling_time_command) } } - command_print(CMD_CTX, "parport toggling time = %" PRIu32 " ns", + command_print(CMD, "parport toggling time = %" PRIu32 " ns", parport_toggling_time_ns); return ERROR_OK; diff --git a/src/jtag/drivers/sysfsgpio.c b/src/jtag/drivers/sysfsgpio.c index 90e93f5a66..eb4941e6b2 100644 --- a/src/jtag/drivers/sysfsgpio.c +++ b/src/jtag/drivers/sysfsgpio.c @@ -356,7 +356,7 @@ COMMAND_HANDLER(sysfsgpio_handle_jtag_gpionums) return ERROR_COMMAND_SYNTAX_ERROR; } - command_print(CMD_CTX, + command_print(CMD, "SysfsGPIO nums: tck = %d, tms = %d, tdi = %d, tdo = %d", tck_gpio, tms_gpio, tdi_gpio, tdo_gpio); @@ -368,7 +368,7 @@ COMMAND_HANDLER(sysfsgpio_handle_jtag_gpionum_tck) if (CMD_ARGC == 1) COMMAND_PARSE_NUMBER(int, CMD_ARGV[0], tck_gpio); - command_print(CMD_CTX, "SysfsGPIO num: tck = %d", tck_gpio); + command_print(CMD, "SysfsGPIO num: tck = %d", tck_gpio); return ERROR_OK; } @@ -377,7 +377,7 @@ COMMAND_HANDLER(sysfsgpio_handle_jtag_gpionum_tms) if (CMD_ARGC == 1) COMMAND_PARSE_NUMBER(int, CMD_ARGV[0], tms_gpio); - command_print(CMD_CTX, "SysfsGPIO num: tms = %d", tms_gpio); + command_print(CMD, "SysfsGPIO num: tms = %d", tms_gpio); return ERROR_OK; } @@ -386,7 +386,7 @@ COMMAND_HANDLER(sysfsgpio_handle_jtag_gpionum_tdo) if (CMD_ARGC == 1) COMMAND_PARSE_NUMBER(int, CMD_ARGV[0], tdo_gpio); - command_print(CMD_CTX, "SysfsGPIO num: tdo = %d", tdo_gpio); + command_print(CMD, "SysfsGPIO num: tdo = %d", tdo_gpio); return ERROR_OK; } @@ -395,7 +395,7 @@ COMMAND_HANDLER(sysfsgpio_handle_jtag_gpionum_tdi) if (CMD_ARGC == 1) COMMAND_PARSE_NUMBER(int, CMD_ARGV[0], tdi_gpio); - command_print(CMD_CTX, "SysfsGPIO num: tdi = %d", tdi_gpio); + command_print(CMD, "SysfsGPIO num: tdi = %d", tdi_gpio); return ERROR_OK; } @@ -404,7 +404,7 @@ COMMAND_HANDLER(sysfsgpio_handle_jtag_gpionum_srst) if (CMD_ARGC == 1) COMMAND_PARSE_NUMBER(int, CMD_ARGV[0], srst_gpio); - command_print(CMD_CTX, "SysfsGPIO num: srst = %d", srst_gpio); + command_print(CMD, "SysfsGPIO num: srst = %d", srst_gpio); return ERROR_OK; } @@ -413,7 +413,7 @@ COMMAND_HANDLER(sysfsgpio_handle_jtag_gpionum_trst) if (CMD_ARGC == 1) COMMAND_PARSE_NUMBER(int, CMD_ARGV[0], trst_gpio); - command_print(CMD_CTX, "SysfsGPIO num: trst = %d", trst_gpio); + command_print(CMD, "SysfsGPIO num: trst = %d", trst_gpio); return ERROR_OK; } @@ -426,7 +426,7 @@ COMMAND_HANDLER(sysfsgpio_handle_swd_gpionums) return ERROR_COMMAND_SYNTAX_ERROR; } - command_print(CMD_CTX, + command_print(CMD, "SysfsGPIO nums: swclk = %d, swdio = %d", swclk_gpio, swdio_gpio); @@ -438,7 +438,7 @@ COMMAND_HANDLER(sysfsgpio_handle_swd_gpionum_swclk) if (CMD_ARGC == 1) COMMAND_PARSE_NUMBER(int, CMD_ARGV[0], swclk_gpio); - command_print(CMD_CTX, "SysfsGPIO num: swclk = %d", swclk_gpio); + command_print(CMD, "SysfsGPIO num: swclk = %d", swclk_gpio); return ERROR_OK; } @@ -447,7 +447,7 @@ COMMAND_HANDLER(sysfsgpio_handle_swd_gpionum_swdio) if (CMD_ARGC == 1) COMMAND_PARSE_NUMBER(int, CMD_ARGV[0], swdio_gpio); - command_print(CMD_CTX, "SysfsGPIO num: swdio = %d", swdio_gpio); + command_print(CMD, "SysfsGPIO num: swdio = %d", swdio_gpio); return ERROR_OK; } diff --git a/src/jtag/tcl.c b/src/jtag/tcl.c index 71d220b82c..0161b28074 100644 --- a/src/jtag/tcl.c +++ b/src/jtag/tcl.c @@ -952,9 +952,9 @@ COMMAND_HANDLER(handle_scan_chain_command) char expected_id[12]; tap = jtag_all_taps(); - command_print(CMD_CTX, + command_print(CMD, " TapName Enabled IdCode Expected IrLen IrCap IrMask"); - command_print(CMD_CTX, + command_print(CMD, "-- ------------------- -------- ---------- ---------- ----- ----- ------"); while (tap) { @@ -970,7 +970,7 @@ COMMAND_HANDLER(handle_scan_chain_command) expected = buf_get_u32(tap->expected, 0, tap->ir_length); expected_mask = buf_get_u32(tap->expected_mask, 0, tap->ir_length); - command_print(CMD_CTX, + command_print(CMD, "%2d %-18s %c 0x%08x %s %5d 0x%02x 0x%02x", tap->abs_chain_position, tap->dotted_name, @@ -987,7 +987,7 @@ COMMAND_HANDLER(handle_scan_chain_command) if (tap->ignore_version) expected_id[2] = '*'; - command_print(CMD_CTX, + command_print(CMD, " %s", expected_id); } @@ -1008,7 +1008,7 @@ COMMAND_HANDLER(handle_jtag_ntrst_delay_command) jtag_set_ntrst_delay(delay); } - command_print(CMD_CTX, "jtag_ntrst_delay: %u", jtag_get_ntrst_delay()); + command_print(CMD, "jtag_ntrst_delay: %u", jtag_get_ntrst_delay()); return ERROR_OK; } @@ -1022,7 +1022,7 @@ COMMAND_HANDLER(handle_jtag_ntrst_assert_width_command) jtag_set_ntrst_assert_width(delay); } - command_print(CMD_CTX, "jtag_ntrst_assert_width: %u", jtag_get_ntrst_assert_width()); + command_print(CMD, "jtag_ntrst_assert_width: %u", jtag_get_ntrst_assert_width()); return ERROR_OK; } @@ -1047,9 +1047,9 @@ COMMAND_HANDLER(handle_jtag_rclk_command) return retval; if (cur_khz) - command_print(CMD_CTX, "RCLK not supported - fallback to %d kHz", cur_khz); + command_print(CMD, "RCLK not supported - fallback to %d kHz", cur_khz); else - command_print(CMD_CTX, "RCLK - adaptive"); + command_print(CMD, "RCLK - adaptive"); return retval; } @@ -1148,7 +1148,7 @@ COMMAND_HANDLER(handle_irscan_command) tap = jtag_tap_by_string(CMD_ARGV[i*2]); if (tap == NULL) { free(fields); - command_print(CMD_CTX, "Tap: %s unknown", CMD_ARGV[i*2]); + command_print(CMD, "Tap: %s unknown", CMD_ARGV[i*2]); return ERROR_FAIL; } @@ -1193,7 +1193,7 @@ COMMAND_HANDLER(handle_verify_ircapture_command) } const char *status = jtag_will_verify_capture_ir() ? "enabled" : "disabled"; - command_print(CMD_CTX, "verify Capture-IR is %s", status); + command_print(CMD, "verify Capture-IR is %s", status); return ERROR_OK; } @@ -1210,7 +1210,7 @@ COMMAND_HANDLER(handle_verify_jtag_command) } const char *status = jtag_will_verify() ? "enabled" : "disabled"; - command_print(CMD_CTX, "verify jtag capture is %s", status); + command_print(CMD, "verify jtag capture is %s", status); return ERROR_OK; } @@ -1232,7 +1232,7 @@ COMMAND_HANDLER(handle_tms_sequence_command) tap_use_new_tms_table(use_new_table); } - command_print(CMD_CTX, "tms sequence is %s", + command_print(CMD, "tms sequence is %s", tap_uses_new_tms_table() ? "short" : "long"); return ERROR_OK; diff --git a/src/pld/pld.c b/src/pld/pld.c index 3f23f6a00c..ef7993c5d4 100644 --- a/src/pld/pld.c +++ b/src/pld/pld.c @@ -116,12 +116,12 @@ COMMAND_HANDLER(handle_pld_devices_command) int i = 0; if (!pld_devices) { - command_print(CMD_CTX, "no pld devices configured"); + command_print(CMD, "no pld devices configured"); return ERROR_OK; } for (p = pld_devices; p; p = p->next) - command_print(CMD_CTX, "#%i: %s", i++, p->driver->name); + command_print(CMD, "#%i: %s", i++, p->driver->name); return ERROR_OK; } @@ -141,13 +141,13 @@ COMMAND_HANDLER(handle_pld_load_command) COMMAND_PARSE_NUMBER(uint, CMD_ARGV[0], dev_id); p = get_pld_device_by_num(dev_id); if (!p) { - command_print(CMD_CTX, "pld device '#%s' is out of bounds", CMD_ARGV[0]); + command_print(CMD, "pld device '#%s' is out of bounds", CMD_ARGV[0]); return ERROR_OK; } retval = p->driver->load(p, CMD_ARGV[1]); if (retval != ERROR_OK) { - command_print(CMD_CTX, "failed loading file %s to pld device %u", + command_print(CMD, "failed loading file %s to pld device %u", CMD_ARGV[1], dev_id); switch (retval) { } @@ -156,7 +156,7 @@ COMMAND_HANDLER(handle_pld_load_command) gettimeofday(&end, NULL); timeval_subtract(&duration, &end, &start); - command_print(CMD_CTX, "loaded file %s to pld device %u in %jis %jius", + command_print(CMD, "loaded file %s to pld device %u in %jis %jius", CMD_ARGV[1], dev_id, (intmax_t)duration.tv_sec, (intmax_t)duration.tv_usec); } diff --git a/src/pld/virtex2.c b/src/pld/virtex2.c index 4e385e97b1..934a6807c3 100644 --- a/src/pld/virtex2.c +++ b/src/pld/virtex2.c @@ -183,13 +183,13 @@ COMMAND_HANDLER(virtex2_handle_read_stat_command) COMMAND_PARSE_NUMBER(uint, CMD_ARGV[0], dev_id); device = get_pld_device_by_num(dev_id); if (!device) { - command_print(CMD_CTX, "pld device '#%s' is out of bounds", CMD_ARGV[0]); + command_print(CMD, "pld device '#%s' is out of bounds", CMD_ARGV[0]); return ERROR_OK; } virtex2_read_stat(device, &status); - command_print(CMD_CTX, "virtex2 status register: 0x%8.8" PRIx32 "", status); + command_print(CMD, "virtex2 status register: 0x%8.8" PRIx32 "", status); return ERROR_OK; } @@ -205,7 +205,7 @@ PLD_DEVICE_COMMAND_HANDLER(virtex2_pld_device_command) tap = jtag_tap_by_string(CMD_ARGV[1]); if (tap == NULL) { - command_print(CMD_CTX, "Tap: %s does not exist", CMD_ARGV[1]); + command_print(CMD, "Tap: %s does not exist", CMD_ARGV[1]); return ERROR_OK; } diff --git a/src/server/gdb_server.c b/src/server/gdb_server.c index 95e6c04914..c6cf7d350e 100644 --- a/src/server/gdb_server.c +++ b/src/server/gdb_server.c @@ -3494,7 +3494,7 @@ COMMAND_HANDLER(handle_gdb_sync_command) return ERROR_COMMAND_SYNTAX_ERROR; if (current_gdb_connection == NULL) { - command_print(CMD_CTX, + command_print(CMD, "gdb_sync command can only be run from within gdb using \"monitor gdb_sync\""); return ERROR_FAIL; } diff --git a/src/server/server.c b/src/server/server.c index 539bdaf825..9e63f74f41 100644 --- a/src/server/server.c +++ b/src/server/server.c @@ -769,7 +769,7 @@ COMMAND_HANDLER(handle_bindto_command) { switch (CMD_ARGC) { case 0: - command_print(CMD_CTX, "bindto name: %s", bindto_name); + command_print(CMD, "bindto name: %s", bindto_name); break; case 1: free(bindto_name); @@ -828,7 +828,7 @@ COMMAND_HELPER(server_port_command, unsigned short *out) { switch (CMD_ARGC) { case 0: - command_print(CMD_CTX, "%d", *out); + command_print(CMD, "%d", *out); break; case 1: { @@ -847,7 +847,7 @@ COMMAND_HELPER(server_pipe_command, char **out) { switch (CMD_ARGC) { case 0: - command_print(CMD_CTX, "%s", *out); + command_print(CMD, "%s", *out); break; case 1: { diff --git a/src/svf/svf.c b/src/svf/svf.c index 223af7e182..759ba52638 100644 --- a/src/svf/svf.c +++ b/src/svf/svf.c @@ -382,7 +382,7 @@ COMMAND_HANDLER(handle_svf_command) if (strcmp(CMD_ARGV[i], "-tap") == 0) { tap = jtag_tap_by_string(CMD_ARGV[i+1]); if (!tap) { - command_print(CMD_CTX, "Tap: %s unknown", CMD_ARGV[i+1]); + command_print(CMD, "Tap: %s unknown", CMD_ARGV[i+1]); return ERROR_FAIL; } i++; @@ -401,7 +401,7 @@ COMMAND_HANDLER(handle_svf_command) svf_fd = fopen(CMD_ARGV[i], "r"); if (svf_fd == NULL) { int err = errno; - command_print(CMD_CTX, "open(\"%s\"): %s", CMD_ARGV[i], strerror(err)); + command_print(CMD, "open(\"%s\"): %s", CMD_ARGV[i], strerror(err)); /* no need to free anything now */ return ERROR_COMMAND_SYNTAX_ERROR; } else @@ -534,7 +534,7 @@ COMMAND_HANDLER(handle_svf_command) time_measure_m = time_measure_s / 60; time_measure_s %= 60; if (time_measure_ms < 1000) - command_print(CMD_CTX, + command_print(CMD, "\r\nTime used: %dm%ds%" PRId64 "ms ", time_measure_m, time_measure_s, @@ -579,13 +579,13 @@ free_all: svf_free_xxd_para(&svf_para.sir_para); if (ERROR_OK == ret) - command_print(CMD_CTX, + command_print(CMD, "svf file programmed %s for %d commands with %d errors", (svf_ignore_error > 1) ? "unsuccessfully" : "successfully", command_num, (svf_ignore_error > 1) ? (svf_ignore_error - 1) : 0); else - command_print(CMD_CTX, "svf file programmed failed"); + command_print(CMD, "svf file programmed failed"); svf_ignore_error = 0; return ret; diff --git a/src/target/aarch64.c b/src/target/aarch64.c index 68ae9f1bf7..9e8983f3f3 100644 --- a/src/target/aarch64.c +++ b/src/target/aarch64.c @@ -2572,7 +2572,7 @@ COMMAND_HANDLER(aarch64_mask_interrupts_command) } n = Jim_Nvp_value2name_simple(nvp_maskisr_modes, aarch64->isrmasking_mode); - command_print(CMD_CTX, "aarch64 interrupt mask %s", n->name); + command_print(CMD, "aarch64 interrupt mask %s", n->name); return ERROR_OK; } diff --git a/src/target/arm720t.c b/src/target/arm720t.c index e8ad852c93..abe5f1cea0 100644 --- a/src/target/arm720t.c +++ b/src/target/arm720t.c @@ -237,7 +237,7 @@ static int arm720t_verify_pointer(struct command_invocation *cmd, struct arm720t_common *arm720t) { if (arm720t->common_magic != ARM720T_COMMON_MAGIC) { - command_print(cmd->ctx, "target is not an ARM720"); + command_print(cmd, "target is not an ARM720"); return ERROR_TARGET_INVALID; } return ERROR_OK; @@ -447,7 +447,7 @@ COMMAND_HANDLER(arm720t_handle_cp15_command) return retval; if (target->state != TARGET_HALTED) { - command_print(CMD_CTX, "target must be stopped for \"%s\" command", CMD_NAME); + command_print(CMD, "target must be stopped for \"%s\" command", CMD_NAME); return ERROR_OK; } @@ -460,7 +460,7 @@ COMMAND_HANDLER(arm720t_handle_cp15_command) uint32_t value; retval = arm720t_read_cp15(target, opcode, &value); if (retval != ERROR_OK) { - command_print(CMD_CTX, "couldn't access cp15 with opcode 0x%8.8" PRIx32 "", opcode); + command_print(CMD, "couldn't access cp15 with opcode 0x%8.8" PRIx32 "", opcode); return ERROR_OK; } @@ -468,17 +468,17 @@ COMMAND_HANDLER(arm720t_handle_cp15_command) if (retval != ERROR_OK) return retval; - command_print(CMD_CTX, "0x%8.8" PRIx32 ": 0x%8.8" PRIx32 "", opcode, value); + command_print(CMD, "0x%8.8" PRIx32 ": 0x%8.8" PRIx32 "", opcode, value); } else if (CMD_ARGC == 2) { uint32_t value; COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], value); retval = arm720t_write_cp15(target, opcode, value); if (retval != ERROR_OK) { - command_print(CMD_CTX, "couldn't access cp15 with opcode 0x%8.8" PRIx32 "", opcode); + command_print(CMD, "couldn't access cp15 with opcode 0x%8.8" PRIx32 "", opcode); return ERROR_OK; } - command_print(CMD_CTX, "0x%8.8" PRIx32 ": 0x%8.8" PRIx32 "", opcode, value); + command_print(CMD, "0x%8.8" PRIx32 ": 0x%8.8" PRIx32 "", opcode, value); } } diff --git a/src/target/arm7_9_common.c b/src/target/arm7_9_common.c index 4fedc0d8fc..b2962d1c46 100644 --- a/src/target/arm7_9_common.c +++ b/src/target/arm7_9_common.c @@ -2747,14 +2747,14 @@ COMMAND_HANDLER(handle_arm7_9_dbgrq_command) struct arm7_9_common *arm7_9 = target_to_arm7_9(target); if (!is_arm7_9(arm7_9)) { - command_print(CMD_CTX, "current target isn't an ARM7/ARM9 target"); + command_print(CMD, "current target isn't an ARM7/ARM9 target"); return ERROR_TARGET_INVALID; } if (CMD_ARGC > 0) COMMAND_PARSE_ENABLE(CMD_ARGV[0], arm7_9->use_dbgrq); - command_print(CMD_CTX, + command_print(CMD, "use of EmbeddedICE dbgrq instead of breakpoint for target halt %s", (arm7_9->use_dbgrq) ? "enabled" : "disabled"); @@ -2767,14 +2767,14 @@ COMMAND_HANDLER(handle_arm7_9_fast_memory_access_command) struct arm7_9_common *arm7_9 = target_to_arm7_9(target); if (!is_arm7_9(arm7_9)) { - command_print(CMD_CTX, "current target isn't an ARM7/ARM9 target"); + command_print(CMD, "current target isn't an ARM7/ARM9 target"); return ERROR_TARGET_INVALID; } if (CMD_ARGC > 0) COMMAND_PARSE_ENABLE(CMD_ARGV[0], arm7_9->fast_memory_access); - command_print(CMD_CTX, + command_print(CMD, "fast memory access is %s", (arm7_9->fast_memory_access) ? "enabled" : "disabled"); @@ -2787,14 +2787,14 @@ COMMAND_HANDLER(handle_arm7_9_dcc_downloads_command) struct arm7_9_common *arm7_9 = target_to_arm7_9(target); if (!is_arm7_9(arm7_9)) { - command_print(CMD_CTX, "current target isn't an ARM7/ARM9 target"); + command_print(CMD, "current target isn't an ARM7/ARM9 target"); return ERROR_TARGET_INVALID; } if (CMD_ARGC > 0) COMMAND_PARSE_ENABLE(CMD_ARGV[0], arm7_9->dcc_downloads); - command_print(CMD_CTX, + command_print(CMD, "dcc downloads are %s", (arm7_9->dcc_downloads) ? "enabled" : "disabled"); diff --git a/src/target/arm920t.c b/src/target/arm920t.c index 88a03952d2..2ecf218fdb 100644 --- a/src/target/arm920t.c +++ b/src/target/arm920t.c @@ -511,7 +511,7 @@ static int arm920t_verify_pointer(struct command_invocation *cmd, struct arm920t_common *arm920t) { if (arm920t->common_magic != ARM920T_COMMON_MAGIC) { - command_print(cmd->ctx, arm920_not); + command_print(cmd, arm920_not); return ERROR_TARGET_INVALID; } @@ -1103,7 +1103,7 @@ COMMAND_HANDLER(arm920t_handle_read_cache_command) /* restore CP15 MMU and Cache settings */ arm920t_write_cp15_physical(target, CP15PHYS_CTRL, cp15_ctrl_saved); - command_print(CMD_CTX, "cache content successfully output to %s", + command_print(CMD, "cache content successfully output to %s", CMD_ARGV[0]); fclose(output); @@ -1415,7 +1415,7 @@ COMMAND_HANDLER(arm920t_handle_read_mmu_command) (i_tlb[i].cam & 0x20) ? "(valid)" : "(invalid)"); } - command_print(CMD_CTX, "mmu content successfully output to %s", + command_print(CMD, "mmu content successfully output to %s", CMD_ARGV[0]); fclose(output); @@ -1456,7 +1456,7 @@ COMMAND_HANDLER(arm920t_handle_cp15_command) return retval; if (target->state != TARGET_HALTED) { - command_print(CMD_CTX, "target must be stopped for " + command_print(CMD, "target must be stopped for " "\"%s\" command", CMD_NAME); return ERROR_OK; } @@ -1472,7 +1472,7 @@ COMMAND_HANDLER(arm920t_handle_cp15_command) uint32_t value; retval = arm920t_read_cp15_physical(target, address, &value); if (retval != ERROR_OK) { - command_print(CMD_CTX, + command_print(CMD, "couldn't access reg %i", address); return ERROR_OK; } @@ -1480,7 +1480,7 @@ COMMAND_HANDLER(arm920t_handle_cp15_command) if (retval != ERROR_OK) return retval; - command_print(CMD_CTX, "%i: %8.8" PRIx32, + command_print(CMD, "%i: %8.8" PRIx32, address, value); } else if (CMD_ARGC == 2) { uint32_t value; @@ -1488,12 +1488,12 @@ COMMAND_HANDLER(arm920t_handle_cp15_command) retval = arm920t_write_cp15_physical(target, address, value); if (retval != ERROR_OK) { - command_print(CMD_CTX, + command_print(CMD, "couldn't access reg %i", address); /* REVISIT why lie? "return retval"? */ return ERROR_OK; } - command_print(CMD_CTX, "%i: %8.8" PRIx32, + command_print(CMD, "%i: %8.8" PRIx32, address, value); } } @@ -1513,7 +1513,7 @@ COMMAND_HANDLER(arm920t_handle_cp15i_command) if (target->state != TARGET_HALTED) { - command_print(CMD_CTX, "target must be stopped for " + command_print(CMD, "target must be stopped for " "\"%s\" command", CMD_NAME); return ERROR_OK; } @@ -1530,14 +1530,14 @@ COMMAND_HANDLER(arm920t_handle_cp15i_command) retval = arm920t_read_cp15_interpreted(target, opcode, 0x0, &value); if (retval != ERROR_OK) { - command_print(CMD_CTX, + command_print(CMD, "couldn't execute %8.8" PRIx32, opcode); /* REVISIT why lie? "return retval"? */ return ERROR_OK; } - command_print(CMD_CTX, "%8.8" PRIx32 ": %8.8" PRIx32, + command_print(CMD, "%8.8" PRIx32 ": %8.8" PRIx32, opcode, value); } else if (CMD_ARGC == 2) { uint32_t value; @@ -1545,13 +1545,13 @@ COMMAND_HANDLER(arm920t_handle_cp15i_command) retval = arm920t_write_cp15_interpreted(target, opcode, value, 0); if (retval != ERROR_OK) { - command_print(CMD_CTX, + command_print(CMD, "couldn't execute %8.8" PRIx32, opcode); /* REVISIT why lie? "return retval"? */ return ERROR_OK; } - command_print(CMD_CTX, "%8.8" PRIx32 ": %8.8" PRIx32, + command_print(CMD, "%8.8" PRIx32 ": %8.8" PRIx32, opcode, value); } else if (CMD_ARGC == 3) { uint32_t value; @@ -1561,12 +1561,12 @@ COMMAND_HANDLER(arm920t_handle_cp15i_command) retval = arm920t_write_cp15_interpreted(target, opcode, value, address); if (retval != ERROR_OK) { - command_print(CMD_CTX, + command_print(CMD, "couldn't execute %8.8" PRIx32, opcode); /* REVISIT why lie? "return retval"? */ return ERROR_OK; } - command_print(CMD_CTX, "%8.8" PRIx32 ": %8.8" PRIx32 + command_print(CMD, "%8.8" PRIx32 ": %8.8" PRIx32 " %8.8" PRIx32, opcode, value, address); } } else diff --git a/src/target/arm926ejs.c b/src/target/arm926ejs.c index 01ce176637..ac30485b8e 100644 --- a/src/target/arm926ejs.c +++ b/src/target/arm926ejs.c @@ -505,7 +505,7 @@ static int arm926ejs_verify_pointer(struct command_invocation *cmd, struct arm926ejs_common *arm926) { if (arm926->common_magic != ARM926EJS_COMMON_MAGIC) { - command_print(cmd->ctx, arm926_not); + command_print(cmd, arm926_not); return ERROR_TARGET_INVALID; } return ERROR_OK; diff --git a/src/target/arm946e.c b/src/target/arm946e.c index 278a70ca24..112631a7c4 100644 --- a/src/target/arm946e.c +++ b/src/target/arm946e.c @@ -103,7 +103,7 @@ static int arm946e_verify_pointer(struct command_invocation *cmd, struct arm946e_common *arm946e) { if (arm946e->common_magic != ARM946E_COMMON_MAGIC) { - command_print(cmd->ctx, "target is not an ARM946"); + command_print(cmd, "target is not an ARM946"); return ERROR_TARGET_INVALID; } return ERROR_OK; @@ -563,7 +563,7 @@ COMMAND_HANDLER(arm946e_handle_cp15) return retval; if (target->state != TARGET_HALTED) { - command_print(CMD_CTX, "target must be stopped for \"%s\" command", CMD_NAME); + command_print(CMD, "target must be stopped for \"%s\" command", CMD_NAME); return ERROR_TARGET_NOT_HALTED; } @@ -574,7 +574,7 @@ COMMAND_HANDLER(arm946e_handle_cp15) uint32_t value; retval = arm946e_read_cp15(target, address, &value); if (retval != ERROR_OK) { - command_print(CMD_CTX, "%s cp15 reg %" PRIi32 " access failed", target_name(target), address); + command_print(CMD, "%s cp15 reg %" PRIi32 " access failed", target_name(target), address); return retval; } retval = jtag_execute_queue(); @@ -582,14 +582,14 @@ COMMAND_HANDLER(arm946e_handle_cp15) return retval; /* Return value in hex format */ - command_print(CMD_CTX, "0x%08" PRIx32, value); + command_print(CMD, "0x%08" PRIx32, value); } else if (CMD_ARGC == 2) { uint32_t value; COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], value); retval = arm946e_write_cp15(target, address, value); if (retval != ERROR_OK) { - command_print(CMD_CTX, "%s cp15 reg %" PRIi32 " access failed", target_name(target), address); + command_print(CMD, "%s cp15 reg %" PRIi32 " access failed", target_name(target), address); return retval; } if (address == CP15_CTL) @@ -613,7 +613,7 @@ COMMAND_HANDLER(arm946e_handle_idcache) return retval; if (target->state != TARGET_HALTED) { - command_print(CMD_CTX, "target must be stopped for \"%s\" command", CMD_NAME); + command_print(CMD, "target must be stopped for \"%s\" command", CMD_NAME); return ERROR_TARGET_NOT_HALTED; } @@ -623,9 +623,9 @@ COMMAND_HANDLER(arm946e_handle_idcache) bool bena = ((arm946e->cp15_control_reg & (icache ? CP15_CTL_ICACHE : CP15_CTL_DCACHE)) != 0) && (arm946e->cp15_control_reg & 0x1); if (csize == 0) - command_print(CMD_CTX, "%s-cache absent", icache ? "I" : "D"); + command_print(CMD, "%s-cache absent", icache ? "I" : "D"); else - command_print(CMD_CTX, "%s-cache size: %" PRIu32 "K, %s", + command_print(CMD, "%s-cache size: %" PRIu32 "K, %s", icache ? "I" : "D", csize, bena ? "enabled" : "disabled"); return ERROR_OK; } @@ -643,7 +643,7 @@ COMMAND_HANDLER(arm946e_handle_idcache) /* Do not invalidate or change state, if cache is absent */ if (csize == 0) { - command_print(CMD_CTX, "%s-cache absent, '%s' operation undefined", icache ? "I" : "D", CMD_ARGV[0]); + command_print(CMD, "%s-cache absent, '%s' operation undefined", icache ? "I" : "D", CMD_ARGV[0]); return ERROR_TARGET_RESOURCE_NOT_AVAILABLE; } diff --git a/src/target/arm966e.c b/src/target/arm966e.c index 98c62745f2..8462f546e6 100644 --- a/src/target/arm966e.c +++ b/src/target/arm966e.c @@ -60,7 +60,7 @@ static int arm966e_verify_pointer(struct command_invocation *cmd, struct arm966e_common *arm966e) { if (arm966e->common_magic != ARM966E_COMMON_MAGIC) { - command_print(cmd->ctx, "target is not an ARM966"); + command_print(cmd, "target is not an ARM966"); return ERROR_TARGET_INVALID; } return ERROR_OK; @@ -175,7 +175,7 @@ COMMAND_HANDLER(arm966e_handle_cp15_command) return retval; if (target->state != TARGET_HALTED) { - command_print(CMD_CTX, "target must be stopped for \"%s\" command", CMD_NAME); + command_print(CMD, "target must be stopped for \"%s\" command", CMD_NAME); return ERROR_OK; } @@ -188,7 +188,7 @@ COMMAND_HANDLER(arm966e_handle_cp15_command) uint32_t value; retval = arm966e_read_cp15(target, address, &value); if (retval != ERROR_OK) { - command_print(CMD_CTX, + command_print(CMD, "couldn't access reg %" PRIi32, address); return ERROR_OK; @@ -197,19 +197,19 @@ COMMAND_HANDLER(arm966e_handle_cp15_command) if (retval != ERROR_OK) return retval; - command_print(CMD_CTX, "%" PRIi32 ": %8.8" PRIx32, + command_print(CMD, "%" PRIi32 ": %8.8" PRIx32, address, value); } else if (CMD_ARGC == 2) { uint32_t value; COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], value); retval = arm966e_write_cp15(target, address, value); if (retval != ERROR_OK) { - command_print(CMD_CTX, + command_print(CMD, "couldn't access reg %" PRIi32, address); return ERROR_OK; } - command_print(CMD_CTX, "%" PRIi32 ": %8.8" PRIx32, + command_print(CMD, "%" PRIi32 ": %8.8" PRIx32, address, value); } } diff --git a/src/target/arm9tdmi.c b/src/target/arm9tdmi.c index 6425027f49..6ab06edf94 100644 --- a/src/target/arm9tdmi.c +++ b/src/target/arm9tdmi.c @@ -801,7 +801,7 @@ COMMAND_HANDLER(handle_arm9tdmi_catch_vectors_command) /* it's uncommon, but some ARM7 chips can support this */ if (arm7_9->common_magic != ARM7_9_COMMON_MAGIC || !arm7_9->has_vector_catch) { - command_print(CMD_CTX, "target doesn't have EmbeddedICE " + command_print(CMD, "target doesn't have EmbeddedICE " "with vector_catch"); return ERROR_TARGET_INVALID; } @@ -834,7 +834,7 @@ COMMAND_HANDLER(handle_arm9tdmi_catch_vectors_command) /* complain if vector wasn't found */ if (!arm9tdmi_vectors[j].name) { - command_print(CMD_CTX, "vector '%s' not found, leaving current setting unchanged", CMD_ARGV[i]); + command_print(CMD, "vector '%s' not found, leaving current setting unchanged", CMD_ARGV[i]); /* reread current setting */ vector_catch_value = buf_get_u32( @@ -852,7 +852,7 @@ COMMAND_HANDLER(handle_arm9tdmi_catch_vectors_command) /* output current settings */ for (unsigned i = 0; arm9tdmi_vectors[i].name; i++) { - command_print(CMD_CTX, "%s: %s", arm9tdmi_vectors[i].name, + command_print(CMD, "%s: %s", arm9tdmi_vectors[i].name, (vector_catch_value & arm9tdmi_vectors[i].value) ? "catch" : "don't catch"); } diff --git a/src/target/arm_adi_v5.c b/src/target/arm_adi_v5.c index f9eb8f4cbb..8ff5efd7af 100644 --- a/src/target/arm_adi_v5.c +++ b/src/target/arm_adi_v5.c @@ -1199,7 +1199,7 @@ static int dap_rom_display(struct command_invocation *cmd, char tabs[16] = ""; if (depth > 16) { - command_print(cmd->ctx, "\tTables too deep"); + command_print(cmd, "\tTables too deep"); return ERROR_FAIL; } @@ -1207,25 +1207,25 @@ static int dap_rom_display(struct command_invocation *cmd, snprintf(tabs, sizeof(tabs), "[L%02d] ", depth); uint32_t base_addr = dbgbase & 0xFFFFF000; - command_print(cmd->ctx, "\t\tComponent base address 0x%08" PRIx32, base_addr); + command_print(cmd, "\t\tComponent base address 0x%08" PRIx32, base_addr); retval = dap_read_part_id(ap, base_addr, &cid, &pid); if (retval != ERROR_OK) { - command_print(cmd->ctx, "\t\tCan't read component, the corresponding core might be turned off"); + command_print(cmd, "\t\tCan't read component, the corresponding core might be turned off"); return ERROR_OK; /* Don't abort recursion */ } if (!is_dap_cid_ok(cid)) { - command_print(cmd->ctx, "\t\tInvalid CID 0x%08" PRIx32, cid); + command_print(cmd, "\t\tInvalid CID 0x%08" PRIx32, cid); return ERROR_OK; /* Don't abort recursion */ } /* component may take multiple 4K pages */ uint32_t size = (pid >> 36) & 0xf; if (size > 0) - command_print(cmd->ctx, "\t\tStart address 0x%08" PRIx32, (uint32_t)(base_addr - 0x1000 * size)); + command_print(cmd, "\t\tStart address 0x%08" PRIx32, (uint32_t)(base_addr - 0x1000 * size)); - command_print(cmd->ctx, "\t\tPeripheral ID 0x%010" PRIx64, pid); + command_print(cmd, "\t\tPeripheral ID 0x%010" PRIx64, pid); uint8_t class = (cid >> 12) & 0xf; uint16_t part_num = pid & 0xfff; @@ -1233,12 +1233,12 @@ static int dap_rom_display(struct command_invocation *cmd, if (designer_id & 0x80) { /* JEP106 code */ - command_print(cmd->ctx, "\t\tDesigner is 0x%03" PRIx16 ", %s", + command_print(cmd, "\t\tDesigner is 0x%03" PRIx16 ", %s", designer_id, jep106_manufacturer(designer_id >> 8, designer_id & 0x7f)); } else { /* Legacy ASCII ID, clear invalid bits */ designer_id &= 0x7f; - command_print(cmd->ctx, "\t\tDesigner ASCII code 0x%02" PRIx16 ", %s", + command_print(cmd, "\t\tDesigner ASCII code 0x%02" PRIx16 ", %s", designer_id, designer_id == 0x41 ? "ARM" : ""); } @@ -1260,8 +1260,8 @@ static int dap_rom_display(struct command_invocation *cmd, break; } - command_print(cmd->ctx, "\t\tPart is 0x%" PRIx16", %s %s", part_num, type, full); - command_print(cmd->ctx, "\t\tComponent class is 0x%" PRIx8 ", %s", class, class_description[class]); + command_print(cmd, "\t\tPart is 0x%" PRIx16", %s %s", part_num, type, full); + command_print(cmd, "\t\tComponent class is 0x%" PRIx8 ", %s", class, class_description[class]); if (class == 1) { /* ROM Table */ uint32_t memtype; @@ -1270,9 +1270,9 @@ static int dap_rom_display(struct command_invocation *cmd, return retval; if (memtype & 0x01) - command_print(cmd->ctx, "\t\tMEMTYPE system memory present on bus"); + command_print(cmd, "\t\tMEMTYPE system memory present on bus"); else - command_print(cmd->ctx, "\t\tMEMTYPE system memory not present: dedicated debug bus"); + command_print(cmd, "\t\tMEMTYPE system memory not present: dedicated debug bus"); /* Read ROM table entries from base address until we get 0x00000000 or reach the reserved area */ for (uint16_t entry_offset = 0; entry_offset < 0xF00; entry_offset += 4) { @@ -1280,7 +1280,7 @@ static int dap_rom_display(struct command_invocation *cmd, retval = mem_ap_read_atomic_u32(ap, base_addr | entry_offset, &romentry); if (retval != ERROR_OK) return retval; - command_print(cmd->ctx, "\t%sROMTABLE[0x%x] = 0x%" PRIx32 "", + command_print(cmd, "\t%sROMTABLE[0x%x] = 0x%" PRIx32 "", tabs, entry_offset, romentry); if (romentry & 0x01) { /* Recurse */ @@ -1288,9 +1288,9 @@ static int dap_rom_display(struct command_invocation *cmd, if (retval != ERROR_OK) return retval; } else if (romentry != 0) { - command_print(cmd->ctx, "\t\tComponent not present"); + command_print(cmd, "\t\tComponent not present"); } else { - command_print(cmd->ctx, "\t%s\tEnd of ROM table", tabs); + command_print(cmd, "\t%s\tEnd of ROM table", tabs); break; } } @@ -1435,7 +1435,7 @@ static int dap_rom_display(struct command_invocation *cmd, } break; } - command_print(cmd->ctx, "\t\tType is 0x%02" PRIx8 ", %s, %s", + command_print(cmd, "\t\tType is 0x%02" PRIx8 ", %s, %s", (uint8_t)(devtype & 0xff), major, subtype); /* REVISIT also show 0xfc8 DevId */ @@ -1456,27 +1456,27 @@ int dap_info_command(struct command_invocation *cmd, if (retval != ERROR_OK) return retval; - command_print(cmd->ctx, "AP ID register 0x%8.8" PRIx32, apid); + command_print(cmd, "AP ID register 0x%8.8" PRIx32, apid); if (apid == 0) { - command_print(cmd->ctx, "No AP found at this ap 0x%x", ap->ap_num); + command_print(cmd, "No AP found at this ap 0x%x", ap->ap_num); return ERROR_FAIL; } switch (apid & (IDR_JEP106 | IDR_TYPE)) { case IDR_JEP106_ARM | AP_TYPE_JTAG_AP: - command_print(cmd->ctx, "\tType is JTAG-AP"); + command_print(cmd, "\tType is JTAG-AP"); break; case IDR_JEP106_ARM | AP_TYPE_AHB_AP: - command_print(cmd->ctx, "\tType is MEM-AP AHB"); + command_print(cmd, "\tType is MEM-AP AHB"); break; case IDR_JEP106_ARM | AP_TYPE_APB_AP: - command_print(cmd->ctx, "\tType is MEM-AP APB"); + command_print(cmd, "\tType is MEM-AP APB"); break; case IDR_JEP106_ARM | AP_TYPE_AXI_AP: - command_print(cmd->ctx, "\tType is MEM-AP AXI"); + command_print(cmd, "\tType is MEM-AP AXI"); break; default: - command_print(cmd->ctx, "\tUnknown AP type"); + command_print(cmd, "\tUnknown AP type"); break; } @@ -1485,15 +1485,15 @@ int dap_info_command(struct command_invocation *cmd, */ mem_ap = (apid & IDR_CLASS) == AP_CLASS_MEM_AP; if (mem_ap) { - command_print(cmd->ctx, "MEM-AP BASE 0x%8.8" PRIx32, dbgbase); + command_print(cmd, "MEM-AP BASE 0x%8.8" PRIx32, dbgbase); if (dbgbase == 0xFFFFFFFF || (dbgbase & 0x3) == 0x2) { - command_print(cmd->ctx, "\tNo ROM table present"); + command_print(cmd, "\tNo ROM table present"); } else { if (dbgbase & 0x01) - command_print(cmd->ctx, "\tValid ROM table present"); + command_print(cmd, "\tValid ROM table present"); else - command_print(cmd->ctx, "\tROM table in legacy format"); + command_print(cmd, "\tROM table in legacy format"); dap_rom_display(cmd, ap, dbgbase & 0xFFFFF000, 0); } @@ -1681,7 +1681,7 @@ COMMAND_HANDLER(dap_baseaddr_command) if (retval != ERROR_OK) return retval; - command_print(CMD_CTX, "0x%8.8" PRIx32, baseaddr); + command_print(CMD, "0x%8.8" PRIx32, baseaddr); return retval; } @@ -1703,7 +1703,7 @@ COMMAND_HANDLER(dap_memaccess_command) } dap->ap[dap->apsel].memaccess_tck = memaccess_tck; - command_print(CMD_CTX, "memory bus access delay set to %" PRIi32 " tck", + command_print(CMD, "memory bus access delay set to %" PRIi32 " tck", dap->ap[dap->apsel].memaccess_tck); return ERROR_OK; @@ -1716,7 +1716,7 @@ COMMAND_HANDLER(dap_apsel_command) switch (CMD_ARGC) { case 0: - command_print(CMD_CTX, "%" PRIi32, dap->apsel); + command_print(CMD, "%" PRIi32, dap->apsel); return ERROR_OK; case 1: COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], apsel); @@ -1740,7 +1740,7 @@ COMMAND_HANDLER(dap_apcsw_command) switch (CMD_ARGC) { case 0: - command_print(CMD_CTX, "ap %" PRIi32 " selected, csw 0x%8.8" PRIx32, + command_print(CMD, "ap %" PRIi32 " selected, csw 0x%8.8" PRIx32, dap->apsel, apcsw); return ERROR_OK; case 1: @@ -1801,7 +1801,7 @@ COMMAND_HANDLER(dap_apid_command) if (retval != ERROR_OK) return retval; - command_print(CMD_CTX, "0x%8.8" PRIx32, apid); + command_print(CMD, "0x%8.8" PRIx32, apid); return retval; } @@ -1853,7 +1853,7 @@ COMMAND_HANDLER(dap_apreg_command) return retval; if (CMD_ARGC == 2) - command_print(CMD_CTX, "0x%08" PRIx32, value); + command_print(CMD, "0x%08" PRIx32, value); return retval; } @@ -1884,7 +1884,7 @@ COMMAND_HANDLER(dap_dpreg_command) return retval; if (CMD_ARGC == 1) - command_print(CMD_CTX, "0x%08" PRIx32, value); + command_print(CMD, "0x%08" PRIx32, value); return retval; } @@ -1906,7 +1906,7 @@ COMMAND_HANDLER(dap_ti_be_32_quirks_command) return ERROR_COMMAND_SYNTAX_ERROR; } dap->ti_be_32_quirks = enable; - command_print(CMD_CTX, "TI BE-32 quirks mode %s", + command_print(CMD, "TI BE-32 quirks mode %s", enable ? "enabled" : "disabled"); return 0; diff --git a/src/target/arm_cti.c b/src/target/arm_cti.c index 3fa54d69c4..3f063b8942 100644 --- a/src/target/arm_cti.c +++ b/src/target/arm_cti.c @@ -252,7 +252,7 @@ COMMAND_HANDLER(handle_cti_dump) return JIM_ERR; for (int i = 0; i < (int)ARRAY_SIZE(cti_names); i++) - command_print(CMD_CTX, "%8.8s (0x%04"PRIx32") 0x%08"PRIx32, + command_print(CMD, "%8.8s (0x%04"PRIx32") 0x%08"PRIx32, cti_names[i].label, cti_names[i].offset, *cti_names[i].p_val); return JIM_OK; @@ -336,7 +336,7 @@ COMMAND_HANDLER(handle_cti_read) if (retval != ERROR_OK) return retval; - command_print(CMD_CTX, "0x%08"PRIx32, value); + command_print(CMD, "0x%08"PRIx32, value); return ERROR_OK; } diff --git a/src/target/armv4_5.c b/src/target/armv4_5.c index d04b17973d..53a6b22290 100644 --- a/src/target/armv4_5.c +++ b/src/target/armv4_5.c @@ -778,17 +778,17 @@ COMMAND_HANDLER(handle_armv4_5_reg_command) struct reg *regs; if (!is_arm(arm)) { - command_print(CMD_CTX, "current target isn't an ARM"); + command_print(CMD, "current target isn't an ARM"); return ERROR_FAIL; } if (target->state != TARGET_HALTED) { - command_print(CMD_CTX, "error: target must be halted for register accesses"); + command_print(CMD, "error: target must be halted for register accesses"); return ERROR_FAIL; } if (arm->core_type != ARM_MODE_ANY) { - command_print(CMD_CTX, + command_print(CMD, "Microcontroller Profile not supported - use standard reg cmd"); return ERROR_OK; } @@ -799,7 +799,7 @@ COMMAND_HANDLER(handle_armv4_5_reg_command) } if (!arm->full_context) { - command_print(CMD_CTX, "error: target doesn't support %s", + command_print(CMD, "error: target doesn't support %s", CMD_NAME); return ERROR_FAIL; } @@ -828,7 +828,7 @@ COMMAND_HANDLER(handle_armv4_5_reg_command) shadow = "shadow "; break; } - command_print(CMD_CTX, "%s%s mode %sregisters", + command_print(CMD, "%s%s mode %sregisters", sep, name, shadow); /* display N rows of up to 4 registers each */ @@ -855,7 +855,7 @@ COMMAND_HANDLER(handle_armv4_5_reg_command) "%8s: %8.8" PRIx32 " ", reg->name, value); } - command_print(CMD_CTX, "%s", output); + command_print(CMD, "%s", output); } } @@ -868,13 +868,13 @@ COMMAND_HANDLER(handle_armv4_5_core_state_command) struct arm *arm = target_to_arm(target); if (!is_arm(arm)) { - command_print(CMD_CTX, "current target isn't an ARM"); + command_print(CMD, "current target isn't an ARM"); return ERROR_FAIL; } if (arm->core_type == ARM_MODE_THREAD) { /* armv7m not supported */ - command_print(CMD_CTX, "Unsupported Command"); + command_print(CMD, "Unsupported Command"); return ERROR_OK; } @@ -885,7 +885,7 @@ COMMAND_HANDLER(handle_armv4_5_core_state_command) arm->core_state = ARM_STATE_THUMB; } - command_print(CMD_CTX, "core state: %s", arm_state_strings[arm->core_state]); + command_print(CMD, "core state: %s", arm_state_strings[arm->core_state]); return ERROR_OK; } @@ -906,7 +906,7 @@ COMMAND_HANDLER(handle_arm_disassemble_command) int thumb = 0; if (!is_arm(arm)) { - command_print(CMD_CTX, "current target isn't an ARM"); + command_print(CMD, "current target isn't an ARM"); return ERROR_FAIL; } @@ -928,7 +928,7 @@ COMMAND_HANDLER(handle_arm_disassemble_command) COMMAND_PARSE_ADDRESS(CMD_ARGV[0], address); if (address & 0x01) { if (!thumb) { - command_print(CMD_CTX, "Disassemble as Thumb"); + command_print(CMD, "Disassemble as Thumb"); thumb = 1; } address &= ~1; @@ -963,7 +963,7 @@ usage: if (retval != ERROR_OK) break; } - command_print(CMD_CTX, "%s", cur_instruction.text); + command_print(CMD, "%s", cur_instruction.text); address += cur_instruction.instruction_size; } diff --git a/src/target/armv4_5_cache.c b/src/target/armv4_5_cache.c index 6a169253e7..eda8cb7c6a 100644 --- a/src/target/armv4_5_cache.c +++ b/src/target/armv4_5_cache.c @@ -79,20 +79,20 @@ int armv4_5_identify_cache(uint32_t cache_type_reg, struct armv4_5_cache_common int armv4_5_handle_cache_info_command(struct command_invocation *cmd, struct armv4_5_cache_common *armv4_5_cache) { if (armv4_5_cache->ctype == -1) { - command_print(cmd->ctx, "cache not yet identified"); + command_print(cmd, "cache not yet identified"); return ERROR_OK; } - command_print(cmd->ctx, "cache type: 0x%1.1x, %s", armv4_5_cache->ctype, + command_print(cmd, "cache type: 0x%1.1x, %s", armv4_5_cache->ctype, (armv4_5_cache->separate) ? "separate caches" : "unified cache"); - command_print(cmd->ctx, "D-Cache: linelen %i, associativity %i, nsets %i, cachesize 0x%x", + command_print(cmd, "D-Cache: linelen %i, associativity %i, nsets %i, cachesize 0x%x", armv4_5_cache->d_u_size.linelen, armv4_5_cache->d_u_size.associativity, armv4_5_cache->d_u_size.nsets, armv4_5_cache->d_u_size.cachesize); - command_print(cmd->ctx, "I-Cache: linelen %i, associativity %i, nsets %i, cachesize 0x%x", + command_print(cmd, "I-Cache: linelen %i, associativity %i, nsets %i, cachesize 0x%x", armv4_5_cache->i_size.linelen, armv4_5_cache->i_size.associativity, armv4_5_cache->i_size.nsets, diff --git a/src/target/armv7a.c b/src/target/armv7a.c index 7f51990af3..2be70b78b0 100644 --- a/src/target/armv7a.c +++ b/src/target/armv7a.c @@ -229,7 +229,7 @@ COMMAND_HANDLER(handle_cache_l2x) if (CMD_ARGC != 2) return ERROR_COMMAND_SYNTAX_ERROR; - /* command_print(CMD_CTX, "%s %s", CMD_ARGV[0], CMD_ARGV[1]); */ + /* command_print(CMD, "%s %s", CMD_ARGV[0], CMD_ARGV[1]); */ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], base); COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], way); @@ -248,7 +248,7 @@ int armv7a_handle_cache_info_command(struct command_invocation *cmd, int cl; if (armv7a_cache->info == -1) { - command_print(cmd->ctx, "cache not yet identified"); + command_print(cmd, "cache not yet identified"); return ERROR_OK; } @@ -256,7 +256,7 @@ int armv7a_handle_cache_info_command(struct command_invocation *cmd, struct armv7a_arch_cache *arch = &(armv7a_cache->arch[cl]); if (arch->ctype & 1) { - command_print(cmd->ctx, + command_print(cmd, "L%d I-Cache: linelen %" PRIi32 ", associativity %" PRIi32 ", nsets %" PRIi32 @@ -269,7 +269,7 @@ int armv7a_handle_cache_info_command(struct command_invocation *cmd, } if (arch->ctype >= 2) { - command_print(cmd->ctx, + command_print(cmd, "L%d D-Cache: linelen %" PRIi32 ", associativity %" PRIi32 ", nsets %" PRIi32 @@ -283,7 +283,7 @@ int armv7a_handle_cache_info_command(struct command_invocation *cmd, } if (l2x_cache != NULL) - command_print(cmd->ctx, "Outer unified cache Base Address 0x%" PRIx32 ", %" PRId32 " ways", + command_print(cmd, "Outer unified cache Base Address 0x%" PRIx32 ", %" PRId32 " ways", l2x_cache->base, l2x_cache->way); return ERROR_OK; diff --git a/src/target/armv7a_cache.c b/src/target/armv7a_cache.c index fca195c298..921ba9be94 100644 --- a/src/target/armv7a_cache.c +++ b/src/target/armv7a_cache.c @@ -513,7 +513,7 @@ COMMAND_HANDLER(arm7a_cache_disable_auto_cmd) struct armv7a_common *armv7a = target_to_armv7a(target); if (CMD_ARGC == 0) { - command_print(CMD_CTX, "auto cache is %s", + command_print(CMD, "auto cache is %s", armv7a->armv7a_mmu.armv7a_cache.auto_cache_enabled ? "enabled" : "disabled"); return ERROR_OK; } diff --git a/src/target/armv7a_cache_l2x.c b/src/target/armv7a_cache_l2x.c index 0aa6953828..72e12b42ba 100644 --- a/src/target/armv7a_cache_l2x.c +++ b/src/target/armv7a_cache_l2x.c @@ -180,11 +180,11 @@ static int arm7a_handle_l2x_cache_info_command(struct command_invocation *cmd, (armv7a_cache->outer_cache); if (armv7a_cache->info == -1) { - command_print(cmd->ctx, "cache not yet identified"); + command_print(cmd, "cache not yet identified"); return ERROR_OK; } - command_print(cmd->ctx, + command_print(cmd, "L2 unified cache Base Address 0x%" PRIx32 ", %" PRId32 " ways", l2x_cache->base, l2x_cache->way); @@ -312,7 +312,7 @@ COMMAND_HANDLER(armv7a_l2x_cache_conf_cmd) if (CMD_ARGC != 2) return ERROR_COMMAND_SYNTAX_ERROR; - /* command_print(CMD_CTX, "%s %s", CMD_ARGV[0], CMD_ARGV[1]); */ + /* command_print(CMD, "%s %s", CMD_ARGV[0], CMD_ARGV[1]); */ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], base); COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], way); diff --git a/src/target/armv8.c b/src/target/armv8.c index 4054c954fb..e7369372ab 100644 --- a/src/target/armv8.c +++ b/src/target/armv8.c @@ -1054,7 +1054,7 @@ COMMAND_HANDLER(armv8_handle_exception_catch_command) return ERROR_FAIL; } - command_print(CMD_CTX, "Exception Catch: Secure: %s, Non-Secure: %s", sec, nsec); + command_print(CMD, "Exception Catch: Secure: %s, Non-Secure: %s", sec, nsec); return ERROR_OK; } @@ -1083,7 +1083,7 @@ int armv8_handle_cache_info_command(struct command_invocation *cmd, struct armv8_cache_common *armv8_cache) { if (armv8_cache->info == -1) { - command_print(cmd->ctx, "cache not yet identified"); + command_print(cmd, "cache not yet identified"); return ERROR_OK; } diff --git a/src/target/armv8_cache.c b/src/target/armv8_cache.c index a641d04ab5..41c85c9ab0 100644 --- a/src/target/armv8_cache.c +++ b/src/target/armv8_cache.c @@ -194,7 +194,7 @@ static int armv8_handle_inner_cache_info_command(struct command_invocation *cmd, int cl; if (armv8_cache->info == -1) { - command_print(cmd->ctx, "cache not yet identified"); + command_print(cmd, "cache not yet identified"); return ERROR_OK; } @@ -202,7 +202,7 @@ static int armv8_handle_inner_cache_info_command(struct command_invocation *cmd, struct armv8_arch_cache *arch = &(armv8_cache->arch[cl]); if (arch->ctype & 1) { - command_print(cmd->ctx, + command_print(cmd, "L%d I-Cache: linelen %" PRIi32 ", associativity %" PRIi32 ", nsets %" PRIi32 @@ -215,7 +215,7 @@ static int armv8_handle_inner_cache_info_command(struct command_invocation *cmd, } if (arch->ctype >= 2) { - command_print(cmd->ctx, + command_print(cmd, "L%d D-Cache: linelen %" PRIi32 ", associativity %" PRIi32 ", nsets %" PRIi32 diff --git a/src/target/cortex_a.c b/src/target/cortex_a.c index 5d1d42af98..9fc265288c 100644 --- a/src/target/cortex_a.c +++ b/src/target/cortex_a.c @@ -2969,7 +2969,7 @@ COMMAND_HANDLER(handle_cortex_a_mask_interrupts_command) } n = Jim_Nvp_value2name_simple(nvp_maskisr_modes, cortex_a->isrmasking_mode); - command_print(CMD_CTX, "cortex_a interrupt mask %s", n->name); + command_print(CMD, "cortex_a interrupt mask %s", n->name); return ERROR_OK; } @@ -2995,7 +2995,7 @@ COMMAND_HANDLER(handle_cortex_a_dacrfixup_command) } n = Jim_Nvp_value2name_simple(nvp_dacrfixup_modes, cortex_a->dacrfixup_mode); - command_print(CMD_CTX, "cortex_a domain access control fixup %s", n->name); + command_print(CMD, "cortex_a domain access control fixup %s", n->name); return ERROR_OK; } diff --git a/src/target/cortex_m.c b/src/target/cortex_m.c index 639e09f7eb..fba832c787 100644 --- a/src/target/cortex_m.c +++ b/src/target/cortex_m.c @@ -2370,7 +2370,7 @@ static int cortex_m_verify_pointer(struct command_invocation *cmd, struct cortex_m_common *cm) { if (cm->common_magic != CORTEX_M_COMMON_MAGIC) { - command_print(cmd->ctx, "target is not a Cortex-M"); + command_print(cmd, "target is not a Cortex-M"); return ERROR_TARGET_INVALID; } return ERROR_OK; @@ -2459,7 +2459,7 @@ write: } for (unsigned i = 0; i < ARRAY_SIZE(vec_ids); i++) { - command_print(CMD_CTX, "%9s: %s", vec_ids[i].name, + command_print(CMD, "%9s: %s", vec_ids[i].name, (demcr & vec_ids[i].mask) ? "catch" : "ignore"); } @@ -2487,7 +2487,7 @@ COMMAND_HANDLER(handle_cortex_m_mask_interrupts_command) return retval; if (target->state != TARGET_HALTED) { - command_print(CMD_CTX, "target must be stopped for \"%s\" command", CMD_NAME); + command_print(CMD, "target must be stopped for \"%s\" command", CMD_NAME); return ERROR_OK; } @@ -2500,7 +2500,7 @@ COMMAND_HANDLER(handle_cortex_m_mask_interrupts_command) } n = Jim_Nvp_value2name_simple(nvp_maskisr_modes, cortex_m->isrmasking_mode); - command_print(CMD_CTX, "cortex_m interrupt mask %s", n->name); + command_print(CMD, "cortex_m interrupt mask %s", n->name); return ERROR_OK; } @@ -2545,7 +2545,7 @@ COMMAND_HANDLER(handle_cortex_m_reset_config_command) break; } - command_print(CMD_CTX, "cortex_m reset_config %s", reset_config); + command_print(CMD, "cortex_m reset_config %s", reset_config); return ERROR_OK; } diff --git a/src/target/dsp563xx.c b/src/target/dsp563xx.c index 28fb8594d4..d8285e49c8 100644 --- a/src/target/dsp563xx.c +++ b/src/target/dsp563xx.c @@ -1930,7 +1930,7 @@ static void handle_md_output(struct command_invocation *cmd, value); if ((i % line_modulo == line_modulo - 1) || (i == count - 1)) { - command_print(cmd->ctx, "%s", output); + command_print(cmd, "%s", output); output_len = 0; } } diff --git a/src/target/esirisc.c b/src/target/esirisc.c index 3d2954fac4..c928445ccf 100644 --- a/src/target/esirisc.c +++ b/src/target/esirisc.c @@ -1680,7 +1680,7 @@ COMMAND_HANDLER(handle_esirisc_cache_arch_command) } } - command_print(CMD_CTX, "esirisc cache_arch %s", esirisc_cache_arch_name(esirisc)); + command_print(CMD, "esirisc cache_arch %s", esirisc_cache_arch_name(esirisc)); return ERROR_OK; } @@ -1698,7 +1698,7 @@ COMMAND_HANDLER(handle_esirisc_flush_caches_command) retval = esirisc_flush_caches(target); - command_print(CMD_CTX, "cache flush %s", + command_print(CMD, "cache flush %s", (retval == ERROR_OK) ? "successful" : "failed"); return retval; @@ -1748,7 +1748,7 @@ COMMAND_HANDLER(handle_esirisc_hwdc_command) } for (size_t i = 0; i < ARRAY_SIZE(esirisc_hwdc_masks); ++i) - command_print(CMD_CTX, "%9s: %s", esirisc_hwdc_masks[i].name, + command_print(CMD, "%9s: %s", esirisc_hwdc_masks[i].name, (esirisc->hwdc_save & esirisc_hwdc_masks[i].mask) ? "enabled" : "disabled"); return ERROR_OK; diff --git a/src/target/esirisc_trace.c b/src/target/esirisc_trace.c index d07a0da9c7..6a7d5a29d9 100644 --- a/src/target/esirisc_trace.c +++ b/src/target/esirisc_trace.c @@ -403,7 +403,7 @@ static int esirisc_trace_analyze_full(struct command_invocation *cmd, uint8_t *b case ESIRISC_TRACE_ID_EXECUTE: case ESIRISC_TRACE_ID_STALL: case ESIRISC_TRACE_ID_BRANCH: - command_print(cmd->ctx, "%s", esirisc_trace_id_strings[id]); + command_print(cmd, "%s", esirisc_trace_id_strings[id]); break; case ESIRISC_TRACE_ID_EXTENDED: { @@ -417,7 +417,7 @@ static int esirisc_trace_analyze_full(struct command_invocation *cmd, uint8_t *b case ESIRISC_TRACE_EXT_ID_STOP: case ESIRISC_TRACE_EXT_ID_WAIT: case ESIRISC_TRACE_EXT_ID_MULTICYCLE: - command_print(cmd->ctx, "%s", esirisc_trace_ext_id_strings[ext_id]); + command_print(cmd, "%s", esirisc_trace_ext_id_strings[ext_id]); break; case ESIRISC_TRACE_EXT_ID_ERET: @@ -430,11 +430,11 @@ static int esirisc_trace_analyze_full(struct command_invocation *cmd, uint8_t *b if (retval != ERROR_OK) goto fail; - command_print(cmd->ctx, "%s PC: 0x%" PRIx32, + command_print(cmd, "%s PC: 0x%" PRIx32, esirisc_trace_ext_id_strings[ext_id], pc); if (ext_id == ESIRISC_TRACE_EXT_ID_END_PC) { - command_print(cmd->ctx, "--- end of trace ---"); + command_print(cmd, "--- end of trace ---"); return ERROR_OK; } break; @@ -450,7 +450,7 @@ static int esirisc_trace_analyze_full(struct command_invocation *cmd, uint8_t *b if (retval != ERROR_OK) goto fail; - command_print(cmd->ctx, "%s EID: 0x%" PRIx32 ", EPC: 0x%" PRIx32, + command_print(cmd, "%s EID: 0x%" PRIx32 ", EPC: 0x%" PRIx32, esirisc_trace_ext_id_strings[ext_id], eid, epc); break; } @@ -461,28 +461,28 @@ static int esirisc_trace_analyze_full(struct command_invocation *cmd, uint8_t *b if (retval != ERROR_OK) goto fail; - command_print(cmd->ctx, "repeats %" PRId32 " %s", count, + command_print(cmd, "repeats %" PRId32 " %s", count, (count == 1) ? "time" : "times"); break; } case ESIRISC_TRACE_EXT_ID_END: - command_print(cmd->ctx, "--- end of trace ---"); + command_print(cmd, "--- end of trace ---"); return ERROR_OK; default: - command_print(cmd->ctx, "invalid extended trace ID: %" PRId32, ext_id); + command_print(cmd, "invalid extended trace ID: %" PRId32, ext_id); return ERROR_FAIL; } break; } default: - command_print(cmd->ctx, "invalid trace ID: %" PRId32, id); + command_print(cmd, "invalid trace ID: %" PRId32, id); return ERROR_FAIL; } } fail: - command_print(cmd->ctx, "trace buffer too small"); + command_print(cmd, "trace buffer too small"); return ERROR_BUF_TOO_SMALL; } @@ -504,14 +504,14 @@ static int esirisc_trace_analyze_simple(struct command_invocation *cmd, uint8_t break; if (pc == end_of_trace) { - command_print(cmd->ctx, "--- end of trace ---"); + command_print(cmd, "--- end of trace ---"); return ERROR_OK; } - command_print(cmd->ctx, "PC: 0x%" PRIx32, pc); + command_print(cmd, "PC: 0x%" PRIx32, pc); } - command_print(cmd->ctx, "trace buffer too small"); + command_print(cmd, "trace buffer too small"); return ERROR_BUF_TOO_SMALL; } @@ -523,19 +523,19 @@ static int esirisc_trace_analyze(struct command_invocation *cmd, uint8_t *buffer switch (trace_info->format) { case ESIRISC_TRACE_FORMAT_FULL: - command_print(cmd->ctx, "--- full pipeline ---"); + command_print(cmd, "--- full pipeline ---"); return esirisc_trace_analyze_full(cmd, buffer, size); case ESIRISC_TRACE_FORMAT_BRANCH: - command_print(cmd->ctx, "--- branches taken ---"); + command_print(cmd, "--- branches taken ---"); return esirisc_trace_analyze_full(cmd, buffer, size); case ESIRISC_TRACE_FORMAT_ICACHE: - command_print(cmd->ctx, "--- icache misses ---"); + command_print(cmd, "--- icache misses ---"); return esirisc_trace_analyze_simple(cmd, buffer, size); default: - command_print(cmd->ctx, "invalid trace format: %i", trace_info->format); + command_print(cmd, "invalid trace format: %i", trace_info->format); return ERROR_FAIL; } } @@ -552,7 +552,7 @@ static int esirisc_trace_analyze_buffer(struct command_invocation *cmd) size = esirisc_trace_buffer_size(trace_info); buffer = calloc(1, size); if (buffer == NULL) { - command_print(cmd->ctx, "out of memory"); + command_print(cmd, "out of memory"); return ERROR_FAIL; } @@ -577,7 +577,7 @@ static int esirisc_trace_analyze_memory(struct command_invocation *cmd, buffer = calloc(1, size); if (buffer == NULL) { - command_print(cmd->ctx, "out of memory"); + command_print(cmd, "out of memory"); return ERROR_FAIL; } @@ -602,15 +602,15 @@ static int esirisc_trace_dump(struct command_invocation *cmd, const char *filena retval = fileio_open(&fileio, filename, FILEIO_WRITE, FILEIO_BINARY); if (retval != ERROR_OK) { - command_print(cmd->ctx, "could not open dump file: %s", filename); + command_print(cmd, "could not open dump file: %s", filename); return retval; } retval = fileio_write(fileio, size, buffer, &size_written); if (retval == ERROR_OK) - command_print(cmd->ctx, "trace data dumped to: %s", filename); + command_print(cmd, "trace data dumped to: %s", filename); else - command_print(cmd->ctx, "could not write dump file: %s", filename); + command_print(cmd, "could not write dump file: %s", filename); fileio_close(fileio); @@ -629,7 +629,7 @@ static int esirisc_trace_dump_buffer(struct command_invocation *cmd, const char size = esirisc_trace_buffer_size(trace_info); buffer = calloc(1, size); if (buffer == NULL) { - command_print(cmd->ctx, "out of memory"); + command_print(cmd, "out of memory"); return ERROR_FAIL; } @@ -654,7 +654,7 @@ static int esirisc_trace_dump_memory(struct command_invocation *cmd, const char buffer = calloc(1, size); if (buffer == NULL) { - command_print(cmd->ctx, "out of memory"); + command_print(cmd, "out of memory"); return ERROR_FAIL; } @@ -676,13 +676,13 @@ COMMAND_HANDLER(handle_esirisc_trace_init_command) struct esirisc_common *esirisc = target_to_esirisc(target); if (!esirisc->has_trace) { - command_print(CMD_CTX, "target does not support trace"); + command_print(CMD, "target does not support trace"); return ERROR_FAIL; } int retval = esirisc_trace_init(target); if (retval == ERROR_OK) - command_print(CMD_CTX, "trace initialized"); + command_print(CMD, "trace initialized"); return retval; } @@ -694,42 +694,42 @@ COMMAND_HANDLER(handle_esirisc_trace_info_command) struct esirisc_trace *trace_info = &esirisc->trace_info; if (!esirisc->has_trace) { - command_print(CMD_CTX, "target does not support trace"); + command_print(CMD, "target does not support trace"); return ERROR_FAIL; } if (esirisc_trace_is_fifo(trace_info)) - command_print(CMD_CTX, "trace FIFO address: 0x%" TARGET_PRIxADDR, + command_print(CMD, "trace FIFO address: 0x%" TARGET_PRIxADDR, trace_info->buffer_start); else { - command_print(CMD_CTX, "trace buffer start: 0x%" TARGET_PRIxADDR, + command_print(CMD, "trace buffer start: 0x%" TARGET_PRIxADDR, trace_info->buffer_start); - command_print(CMD_CTX, "trace buffer end: 0x%" TARGET_PRIxADDR, + command_print(CMD, "trace buffer end: 0x%" TARGET_PRIxADDR, trace_info->buffer_end); - command_print(CMD_CTX, "trace buffer will %swrap", + command_print(CMD, "trace buffer will %swrap", trace_info->buffer_wrap ? "" : "not "); } - command_print(CMD_CTX, "flow control: %s", + command_print(CMD, "flow control: %s", trace_info->flow_control ? "enabled" : "disabled"); - command_print(CMD_CTX, "trace format: %s", + command_print(CMD, "trace format: %s", esirisc_trace_format_strings[trace_info->format]); - command_print(CMD_CTX, "number of PC bits: %i", trace_info->pc_bits); + command_print(CMD, "number of PC bits: %i", trace_info->pc_bits); - command_print(CMD_CTX, "start trigger: %s", + command_print(CMD, "start trigger: %s", esirisc_trace_trigger_strings[trace_info->start_trigger]); - command_print(CMD_CTX, "start data: 0x%" PRIx32, trace_info->start_data); - command_print(CMD_CTX, "start mask: 0x%" PRIx32, trace_info->start_mask); + command_print(CMD, "start data: 0x%" PRIx32, trace_info->start_data); + command_print(CMD, "start mask: 0x%" PRIx32, trace_info->start_mask); - command_print(CMD_CTX, "stop trigger: %s", + command_print(CMD, "stop trigger: %s", esirisc_trace_trigger_strings[trace_info->stop_trigger]); - command_print(CMD_CTX, "stop data: 0x%" PRIx32, trace_info->stop_data); - command_print(CMD_CTX, "stop mask: 0x%" PRIx32, trace_info->stop_mask); + command_print(CMD, "stop data: 0x%" PRIx32, trace_info->stop_data); + command_print(CMD, "stop mask: 0x%" PRIx32, trace_info->stop_mask); - command_print(CMD_CTX, "trigger delay: %s", + command_print(CMD, "trigger delay: %s", esirisc_trace_delay_strings[trace_info->delay]); - command_print(CMD_CTX, "trigger delay cycles: %i", trace_info->delay_cycles); + command_print(CMD, "trigger delay cycles: %i", trace_info->delay_cycles); return ERROR_OK; } @@ -741,7 +741,7 @@ COMMAND_HANDLER(handle_esirisc_trace_status_command) uint32_t status; if (!esirisc->has_trace) { - command_print(CMD_CTX, "target does not support trace"); + command_print(CMD, "target does not support trace"); return ERROR_FAIL; } @@ -749,7 +749,7 @@ COMMAND_HANDLER(handle_esirisc_trace_status_command) if (retval != ERROR_OK) return retval; - command_print(CMD_CTX, "trace is %s%s%s%s", + command_print(CMD, "trace is %s%s%s%s", (status & STATUS_T) ? "started" : "stopped", (status & STATUS_TD) ? ", disabled" : "", (status & STATUS_W) ? ", wrapped" : "", @@ -764,13 +764,13 @@ COMMAND_HANDLER(handle_esirisc_trace_start_command) struct esirisc_common *esirisc = target_to_esirisc(target); if (!esirisc->has_trace) { - command_print(CMD_CTX, "target does not support trace"); + command_print(CMD, "target does not support trace"); return ERROR_FAIL; } int retval = esirisc_trace_start(target); if (retval == ERROR_OK) - command_print(CMD_CTX, "trace started"); + command_print(CMD, "trace started"); return retval; } @@ -781,13 +781,13 @@ COMMAND_HANDLER(handle_esirisc_trace_stop_command) struct esirisc_common *esirisc = target_to_esirisc(target); if (!esirisc->has_trace) { - command_print(CMD_CTX, "target does not support trace"); + command_print(CMD, "target does not support trace"); return ERROR_FAIL; } int retval = esirisc_trace_stop(target); if (retval == ERROR_OK) - command_print(CMD_CTX, "trace stopped"); + command_print(CMD, "trace stopped"); return retval; } @@ -801,7 +801,7 @@ COMMAND_HANDLER(handle_esirisc_trace_analyze_command) uint32_t size; if (!esirisc->has_trace) { - command_print(CMD_CTX, "target does not support trace"); + command_print(CMD, "target does not support trace"); return ERROR_FAIL; } @@ -817,7 +817,7 @@ COMMAND_HANDLER(handle_esirisc_trace_analyze_command) * as arguments as a workaround. */ if (esirisc_trace_is_fifo(trace_info)) { - command_print(CMD_CTX, "analyze from FIFO not supported"); + command_print(CMD, "analyze from FIFO not supported"); return ERROR_FAIL; } @@ -839,7 +839,7 @@ COMMAND_HANDLER(handle_esirisc_trace_dump_command) uint32_t size; if (!esirisc->has_trace) { - command_print(CMD_CTX, "target does not support trace"); + command_print(CMD, "target does not support trace"); return ERROR_FAIL; } @@ -849,7 +849,7 @@ COMMAND_HANDLER(handle_esirisc_trace_dump_command) if (CMD_ARGC == 1) { /* also see: handle_esirisc_trace_analyze_command() */ if (esirisc_trace_is_fifo(trace_info)) { - command_print(CMD_CTX, "dump from FIFO not supported"); + command_print(CMD, "dump from FIFO not supported"); return ERROR_FAIL; } @@ -946,7 +946,7 @@ COMMAND_HANDLER(handle_esirisc_trace_format_command) COMMAND_PARSE_NUMBER(int, CMD_ARGV[1], pc_bits); if (pc_bits < 1 || pc_bits > 31) { - command_print(CMD_CTX, "invalid pc_bits: %i; must be 1..31", pc_bits); + command_print(CMD, "invalid pc_bits: %i; must be 1..31", pc_bits); return ERROR_COMMAND_SYNTAX_ERROR; } diff --git a/src/target/etb.c b/src/target/etb.c index 7cd8b6cd5c..392c6ad7fe 100644 --- a/src/target/etb.c +++ b/src/target/etb.c @@ -344,13 +344,13 @@ COMMAND_HANDLER(handle_etb_config_command) arm = target_to_arm(target); if (!is_arm(arm)) { - command_print(CMD_CTX, "ETB: '%s' isn't an ARM", CMD_ARGV[0]); + command_print(CMD, "ETB: '%s' isn't an ARM", CMD_ARGV[0]); return ERROR_FAIL; } tap = jtag_tap_by_string(CMD_ARGV[1]); if (tap == NULL) { - command_print(CMD_CTX, "ETB: TAP %s does not exist", CMD_ARGV[1]); + command_print(CMD, "ETB: TAP %s does not exist", CMD_ARGV[1]); return ERROR_FAIL; } @@ -382,17 +382,17 @@ COMMAND_HANDLER(handle_etb_trigger_percent_command) target = get_current_target(CMD_CTX); arm = target_to_arm(target); if (!is_arm(arm)) { - command_print(CMD_CTX, "ETB: current target isn't an ARM"); + command_print(CMD, "ETB: current target isn't an ARM"); return ERROR_FAIL; } etm = arm->etm; if (!etm) { - command_print(CMD_CTX, "ETB: target has no ETM configured"); + command_print(CMD, "ETB: target has no ETM configured"); return ERROR_FAIL; } if (etm->capture_driver != &etb_capture_driver) { - command_print(CMD_CTX, "ETB: target not using ETB"); + command_print(CMD, "ETB: target not using ETB"); return ERROR_FAIL; } etb = arm->etm->capture_driver_priv; @@ -402,13 +402,13 @@ COMMAND_HANDLER(handle_etb_trigger_percent_command) COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], new_value); if ((new_value < 2) || (new_value > 100)) - command_print(CMD_CTX, + command_print(CMD, "valid percentages are 2%% to 100%%"); else etb->trigger_percent = (unsigned) new_value; } - command_print(CMD_CTX, "%d percent of tracebuffer fills after trigger", + command_print(CMD, "%d percent of tracebuffer fills after trigger", etb->trigger_percent); return ERROR_OK; diff --git a/src/target/etm.c b/src/target/etm.c index 4c95626f99..5751348e71 100644 --- a/src/target/etm.c +++ b/src/target/etm.c @@ -869,7 +869,7 @@ static int etmv1_analyze_trace(struct etm_context *ctx, struct command_invocatio ctx->capture_driver->read_trace(ctx); if (ctx->trace_depth == 0) { - command_print(cmd->ctx, "Trace is empty."); + command_print(cmd, "Trace is empty."); return ERROR_OK; } @@ -893,7 +893,7 @@ static int etmv1_analyze_trace(struct etm_context *ctx, struct command_invocatio int current_pc_ok = ctx->pc_ok; if (ctx->trace_data[ctx->pipe_index].flags & ETMV1_TRIGGER_CYCLE) - command_print(cmd->ctx, "--- trigger ---"); + command_print(cmd, "--- trigger ---"); /* instructions execute in IE/D or BE/D cycles */ if ((pipestat == STAT_IE) || (pipestat == STAT_ID)) @@ -942,7 +942,7 @@ static int etmv1_analyze_trace(struct etm_context *ctx, struct command_invocatio next_pc = ctx->last_branch; break; case 0x1: /* tracing enabled */ - command_print(cmd->ctx, + command_print(cmd, "--- tracing enabled at 0x%8.8" PRIx32 " ---", ctx->last_branch); ctx->current_pc = ctx->last_branch; @@ -950,7 +950,7 @@ static int etmv1_analyze_trace(struct etm_context *ctx, struct command_invocatio continue; break; case 0x2: /* trace restarted after FIFO overflow */ - command_print(cmd->ctx, + command_print(cmd, "--- trace restarted after FIFO overflow at 0x%8.8" PRIx32 " ---", ctx->last_branch); ctx->current_pc = ctx->last_branch; @@ -958,7 +958,7 @@ static int etmv1_analyze_trace(struct etm_context *ctx, struct command_invocatio continue; break; case 0x3: /* exit from debug state */ - command_print(cmd->ctx, + command_print(cmd, "--- exit from debug state at 0x%8.8" PRIx32 " ---", ctx->last_branch); ctx->current_pc = ctx->last_branch; @@ -971,7 +971,7 @@ static int etmv1_analyze_trace(struct etm_context *ctx, struct command_invocatio * we have to move on with the next trace cycle */ if (!current_pc_ok) { - command_print(cmd->ctx, + command_print(cmd, "--- periodic synchronization point at 0x%8.8" PRIx32 " ---", next_pc); ctx->current_pc = next_pc; @@ -998,9 +998,9 @@ static int etmv1_analyze_trace(struct etm_context *ctx, struct command_invocatio || ((ctx->last_branch >= 0xffff0000) && (ctx->last_branch <= 0xffff0020))) { if ((ctx->last_branch & 0xff) == 0x10) - command_print(cmd->ctx, "data abort"); + command_print(cmd, "data abort"); else { - command_print(cmd->ctx, + command_print(cmd, "exception vector 0x%2.2" PRIx32 "", ctx->last_branch); ctx->current_pc = ctx->last_branch; @@ -1058,7 +1058,7 @@ static int etmv1_analyze_trace(struct etm_context *ctx, struct command_invocatio ctx->ptr_ok = 1; if (ctx->ptr_ok) - command_print(cmd->ctx, + command_print(cmd, "address: 0x%8.8" PRIx32 "", ctx->last_ptr); } @@ -1073,7 +1073,7 @@ static int etmv1_analyze_trace(struct etm_context *ctx, struct command_invocatio uint32_t data; if (etmv1_data(ctx, 4, &data) != 0) return ERROR_ETM_ANALYSIS_FAILED; - command_print(cmd->ctx, + command_print(cmd, "data: 0x%8.8" PRIx32 "", data); } @@ -1084,7 +1084,7 @@ static int etmv1_analyze_trace(struct etm_context *ctx, struct command_invocatio if (etmv1_data(ctx, arm_access_size(&instruction), &data) != 0) return ERROR_ETM_ANALYSIS_FAILED; - command_print(cmd->ctx, "data: 0x%8.8" PRIx32 "", data); + command_print(cmd, "data: 0x%8.8" PRIx32 "", data); } } @@ -1119,7 +1119,7 @@ static int etmv1_analyze_trace(struct etm_context *ctx, struct command_invocatio (cycles == 1) ? "cycle" : "cycles"); } - command_print(cmd->ctx, "%s%s%s", + command_print(cmd, "%s%s%s", instruction.text, (pipestat == STAT_IN) ? " (not executed)" : "", cycles_text); @@ -1156,7 +1156,7 @@ static COMMAND_HELPER(handle_etm_tracemode_command_update, else if (strcmp(CMD_ARGV[0], "all") == 0) tracemode = ETM_CTRL_TRACE_DATA | ETM_CTRL_TRACE_ADDR; else { - command_print(CMD_CTX, "invalid option '%s'", CMD_ARGV[0]); + command_print(CMD, "invalid option '%s'", CMD_ARGV[0]); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -1176,7 +1176,7 @@ static COMMAND_HELPER(handle_etm_tracemode_command_update, tracemode |= ETM_CTRL_CONTEXTID_32; break; default: - command_print(CMD_CTX, "invalid option '%s'", CMD_ARGV[1]); + command_print(CMD, "invalid option '%s'", CMD_ARGV[1]); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -1207,13 +1207,13 @@ COMMAND_HANDLER(handle_etm_tracemode_command) struct etm_context *etm; if (!is_arm(arm)) { - command_print(CMD_CTX, "ETM: current target isn't an ARM"); + command_print(CMD, "ETM: current target isn't an ARM"); return ERROR_FAIL; } etm = arm->etm; if (!etm) { - command_print(CMD_CTX, "current target doesn't have an ETM configured"); + command_print(CMD, "current target doesn't have an ETM configured"); return ERROR_FAIL; } @@ -1235,47 +1235,47 @@ COMMAND_HANDLER(handle_etm_tracemode_command) * or couldn't be written; display actual hardware state... */ - command_print(CMD_CTX, "current tracemode configuration:"); + command_print(CMD, "current tracemode configuration:"); switch (tracemode & ETM_CTRL_TRACE_MASK) { default: - command_print(CMD_CTX, "data tracing: none"); + command_print(CMD, "data tracing: none"); break; case ETM_CTRL_TRACE_DATA: - command_print(CMD_CTX, "data tracing: data only"); + command_print(CMD, "data tracing: data only"); break; case ETM_CTRL_TRACE_ADDR: - command_print(CMD_CTX, "data tracing: address only"); + command_print(CMD, "data tracing: address only"); break; case ETM_CTRL_TRACE_DATA | ETM_CTRL_TRACE_ADDR: - command_print(CMD_CTX, "data tracing: address and data"); + command_print(CMD, "data tracing: address and data"); break; } switch (tracemode & ETM_CTRL_CONTEXTID_MASK) { case ETM_CTRL_CONTEXTID_NONE: - command_print(CMD_CTX, "contextid tracing: none"); + command_print(CMD, "contextid tracing: none"); break; case ETM_CTRL_CONTEXTID_8: - command_print(CMD_CTX, "contextid tracing: 8 bit"); + command_print(CMD, "contextid tracing: 8 bit"); break; case ETM_CTRL_CONTEXTID_16: - command_print(CMD_CTX, "contextid tracing: 16 bit"); + command_print(CMD, "contextid tracing: 16 bit"); break; case ETM_CTRL_CONTEXTID_32: - command_print(CMD_CTX, "contextid tracing: 32 bit"); + command_print(CMD, "contextid tracing: 32 bit"); break; } if (tracemode & ETM_CTRL_CYCLE_ACCURATE) - command_print(CMD_CTX, "cycle-accurate tracing enabled"); + command_print(CMD, "cycle-accurate tracing enabled"); else - command_print(CMD_CTX, "cycle-accurate tracing disabled"); + command_print(CMD, "cycle-accurate tracing disabled"); if (tracemode & ETM_CTRL_BRANCH_OUTPUT) - command_print(CMD_CTX, "full branch address output enabled"); + command_print(CMD, "full branch address output enabled"); else - command_print(CMD_CTX, "full branch address output disabled"); + command_print(CMD, "full branch address output disabled"); #define TRACEMODE_MASK ( \ ETM_CTRL_CONTEXTID_MASK \ @@ -1331,7 +1331,7 @@ COMMAND_HANDLER(handle_etm_config_command) arm = target_to_arm(target); if (!is_arm(arm)) { - command_print(CMD_CTX, "target '%s' is '%s'; not an ARM", + command_print(CMD, "target '%s' is '%s'; not an ARM", target_name(target), target_type_name(target)); return ERROR_FAIL; @@ -1382,7 +1382,7 @@ COMMAND_HANDLER(handle_etm_config_command) portmode |= ETM_PORT_2BIT; break; default: - command_print(CMD_CTX, + command_print(CMD, "unsupported ETM port width '%s'", CMD_ARGV[1]); return ERROR_FAIL; } @@ -1394,7 +1394,7 @@ COMMAND_HANDLER(handle_etm_config_command) else if (strcmp("demultiplexed", CMD_ARGV[2]) == 0) portmode |= ETM_PORT_DEMUXED; else { - command_print(CMD_CTX, + command_print(CMD, "unsupported ETM port mode '%s', must be 'normal', 'multiplexed' or 'demultiplexed'", CMD_ARGV[2]); return ERROR_FAIL; @@ -1405,7 +1405,7 @@ COMMAND_HANDLER(handle_etm_config_command) else if (strcmp("full", CMD_ARGV[3]) == 0) portmode |= ETM_PORT_FULL_CLOCK; else { - command_print(CMD_CTX, + command_print(CMD, "unsupported ETM port clocking '%s', must be 'full' or 'half'", CMD_ARGV[3]); return ERROR_FAIL; @@ -1461,44 +1461,44 @@ COMMAND_HANDLER(handle_etm_info_command) target = get_current_target(CMD_CTX); arm = target_to_arm(target); if (!is_arm(arm)) { - command_print(CMD_CTX, "ETM: current target isn't an ARM"); + command_print(CMD, "ETM: current target isn't an ARM"); return ERROR_FAIL; } etm = arm->etm; if (!etm) { - command_print(CMD_CTX, "current target doesn't have an ETM configured"); + command_print(CMD, "current target doesn't have an ETM configured"); return ERROR_FAIL; } - command_print(CMD_CTX, "ETM v%d.%d", + command_print(CMD, "ETM v%d.%d", etm->bcd_vers >> 4, etm->bcd_vers & 0xf); - command_print(CMD_CTX, "pairs of address comparators: %i", + command_print(CMD, "pairs of address comparators: %i", (int) (etm->config >> 0) & 0x0f); - command_print(CMD_CTX, "data comparators: %i", + command_print(CMD, "data comparators: %i", (int) (etm->config >> 4) & 0x0f); - command_print(CMD_CTX, "memory map decoders: %i", + command_print(CMD, "memory map decoders: %i", (int) (etm->config >> 8) & 0x1f); - command_print(CMD_CTX, "number of counters: %i", + command_print(CMD, "number of counters: %i", (int) (etm->config >> 13) & 0x07); - command_print(CMD_CTX, "sequencer %spresent", + command_print(CMD, "sequencer %spresent", (int) (etm->config & (1 << 16)) ? "" : "not "); - command_print(CMD_CTX, "number of ext. inputs: %i", + command_print(CMD, "number of ext. inputs: %i", (int) (etm->config >> 17) & 0x07); - command_print(CMD_CTX, "number of ext. outputs: %i", + command_print(CMD, "number of ext. outputs: %i", (int) (etm->config >> 20) & 0x07); - command_print(CMD_CTX, "FIFO full %spresent", + command_print(CMD, "FIFO full %spresent", (int) (etm->config & (1 << 23)) ? "" : "not "); if (etm->bcd_vers < 0x20) - command_print(CMD_CTX, "protocol version: %i", + command_print(CMD, "protocol version: %i", (int) (etm->config >> 28) & 0x07); else { - command_print(CMD_CTX, + command_print(CMD, "coprocessor and memory access %ssupported", (etm->config & (1 << 26)) ? "" : "not "); - command_print(CMD_CTX, "trace start/stop %spresent", + command_print(CMD, "trace start/stop %spresent", (etm->config & (1 << 26)) ? "" : "not "); - command_print(CMD_CTX, "number of context comparators: %i", + command_print(CMD, "number of context comparators: %i", (int) (etm->config >> 24) & 0x03); } @@ -1549,30 +1549,30 @@ COMMAND_HANDLER(handle_etm_info_command) LOG_ERROR("Illegal max_port_size"); return ERROR_FAIL; } - command_print(CMD_CTX, "max. port size: %i", max_port_size); + command_print(CMD, "max. port size: %i", max_port_size); if (etm->bcd_vers < 0x30) { - command_print(CMD_CTX, "half-rate clocking %ssupported", + command_print(CMD, "half-rate clocking %ssupported", (config & (1 << 3)) ? "" : "not "); - command_print(CMD_CTX, "full-rate clocking %ssupported", + command_print(CMD, "full-rate clocking %ssupported", (config & (1 << 4)) ? "" : "not "); - command_print(CMD_CTX, "normal trace format %ssupported", + command_print(CMD, "normal trace format %ssupported", (config & (1 << 5)) ? "" : "not "); - command_print(CMD_CTX, "multiplex trace format %ssupported", + command_print(CMD, "multiplex trace format %ssupported", (config & (1 << 6)) ? "" : "not "); - command_print(CMD_CTX, "demultiplex trace format %ssupported", + command_print(CMD, "demultiplex trace format %ssupported", (config & (1 << 7)) ? "" : "not "); } else { /* REVISIT show which size and format are selected ... */ - command_print(CMD_CTX, "current port size %ssupported", + command_print(CMD, "current port size %ssupported", (config & (1 << 10)) ? "" : "not "); - command_print(CMD_CTX, "current trace format %ssupported", + command_print(CMD, "current trace format %ssupported", (config & (1 << 11)) ? "" : "not "); } if (etm->bcd_vers >= 0x21) - command_print(CMD_CTX, "fetch comparisons %ssupported", + command_print(CMD, "fetch comparisons %ssupported", (config & (1 << 17)) ? "not " : ""); - command_print(CMD_CTX, "FIFO full %ssupported", + command_print(CMD, "FIFO full %ssupported", (config & (1 << 8)) ? "" : "not "); return ERROR_OK; @@ -1588,13 +1588,13 @@ COMMAND_HANDLER(handle_etm_status_command) target = get_current_target(CMD_CTX); arm = target_to_arm(target); if (!is_arm(arm)) { - command_print(CMD_CTX, "ETM: current target isn't an ARM"); + command_print(CMD, "ETM: current target isn't an ARM"); return ERROR_FAIL; } etm = arm->etm; if (!etm) { - command_print(CMD_CTX, "current target doesn't have an ETM configured"); + command_print(CMD, "current target doesn't have an ETM configured"); return ERROR_FAIL; } @@ -1608,7 +1608,7 @@ COMMAND_HANDLER(handle_etm_status_command) if (etm_get_reg(reg) == ERROR_OK) { unsigned s = buf_get_u32(reg->value, 0, reg->size); - command_print(CMD_CTX, "etm: %s%s%s%s", + command_print(CMD, "etm: %s%s%s%s", /* bit(1) == progbit */ (etm->bcd_vers >= 0x12) ? ((s & (1 << 1)) @@ -1626,21 +1626,21 @@ COMMAND_HANDLER(handle_etm_status_command) /* Trace Port Driver status */ trace_status = etm->capture_driver->status(etm); if (trace_status == TRACE_IDLE) - command_print(CMD_CTX, "%s: idle", etm->capture_driver->name); + command_print(CMD, "%s: idle", etm->capture_driver->name); else { static char *completed = " completed"; static char *running = " is running"; static char *overflowed = ", overflowed"; static char *triggered = ", triggered"; - command_print(CMD_CTX, "%s: trace collection%s%s%s", + command_print(CMD, "%s: trace collection%s%s%s", etm->capture_driver->name, (trace_status & TRACE_RUNNING) ? running : completed, (trace_status & TRACE_OVERFLOWED) ? overflowed : "", (trace_status & TRACE_TRIGGERED) ? triggered : ""); if (etm->trace_depth > 0) { - command_print(CMD_CTX, "%i frames of trace data read", + command_print(CMD, "%i frames of trace data read", (int)(etm->trace_depth)); } } @@ -1660,20 +1660,20 @@ COMMAND_HANDLER(handle_etm_image_command) target = get_current_target(CMD_CTX); arm = target_to_arm(target); if (!is_arm(arm)) { - command_print(CMD_CTX, "ETM: current target isn't an ARM"); + command_print(CMD, "ETM: current target isn't an ARM"); return ERROR_FAIL; } etm_ctx = arm->etm; if (!etm_ctx) { - command_print(CMD_CTX, "current target doesn't have an ETM configured"); + command_print(CMD, "current target doesn't have an ETM configured"); return ERROR_FAIL; } if (etm_ctx->image) { image_close(etm_ctx->image); free(etm_ctx->image); - command_print(CMD_CTX, "previously loaded image found and closed"); + command_print(CMD, "previously loaded image found and closed"); } etm_ctx->image = malloc(sizeof(struct image)); @@ -1711,24 +1711,24 @@ COMMAND_HANDLER(handle_etm_dump_command) target = get_current_target(CMD_CTX); arm = target_to_arm(target); if (!is_arm(arm)) { - command_print(CMD_CTX, "ETM: current target isn't an ARM"); + command_print(CMD, "ETM: current target isn't an ARM"); return ERROR_FAIL; } etm_ctx = arm->etm; if (!etm_ctx) { - command_print(CMD_CTX, "current target doesn't have an ETM configured"); + command_print(CMD, "current target doesn't have an ETM configured"); return ERROR_FAIL; } if (etm_ctx->capture_driver->status == TRACE_IDLE) { - command_print(CMD_CTX, "trace capture wasn't enabled, no trace data captured"); + command_print(CMD, "trace capture wasn't enabled, no trace data captured"); return ERROR_OK; } if (etm_ctx->capture_driver->status(etm_ctx) & TRACE_RUNNING) { /* TODO: if on-the-fly capture is to be supported, this needs to be changed */ - command_print(CMD_CTX, "trace capture not completed"); + command_print(CMD, "trace capture not completed"); return ERROR_FAIL; } @@ -1768,18 +1768,18 @@ COMMAND_HANDLER(handle_etm_load_command) target = get_current_target(CMD_CTX); arm = target_to_arm(target); if (!is_arm(arm)) { - command_print(CMD_CTX, "ETM: current target isn't an ARM"); + command_print(CMD, "ETM: current target isn't an ARM"); return ERROR_FAIL; } etm_ctx = arm->etm; if (!etm_ctx) { - command_print(CMD_CTX, "current target doesn't have an ETM configured"); + command_print(CMD, "current target doesn't have an ETM configured"); return ERROR_FAIL; } if (etm_ctx->capture_driver->status(etm_ctx) & TRACE_RUNNING) { - command_print(CMD_CTX, "trace capture running, stop first"); + command_print(CMD, "trace capture running, stop first"); return ERROR_FAIL; } @@ -1794,7 +1794,7 @@ COMMAND_HANDLER(handle_etm_load_command) } if (filesize % 4) { - command_print(CMD_CTX, "size isn't a multiple of 4, no valid trace data"); + command_print(CMD, "size isn't a multiple of 4, no valid trace data"); fileio_close(file); return ERROR_FAIL; } @@ -1812,7 +1812,7 @@ COMMAND_HANDLER(handle_etm_load_command) } etm_ctx->trace_data = malloc(sizeof(struct etmv1_trace_data) * etm_ctx->trace_depth); if (etm_ctx->trace_data == NULL) { - command_print(CMD_CTX, "not enough memory to perform operation"); + command_print(CMD, "not enough memory to perform operation"); fileio_close(file); return ERROR_FAIL; } @@ -1842,13 +1842,13 @@ COMMAND_HANDLER(handle_etm_start_command) target = get_current_target(CMD_CTX); arm = target_to_arm(target); if (!is_arm(arm)) { - command_print(CMD_CTX, "ETM: current target isn't an ARM"); + command_print(CMD, "ETM: current target isn't an ARM"); return ERROR_FAIL; } etm_ctx = arm->etm; if (!etm_ctx) { - command_print(CMD_CTX, "current target doesn't have an ETM configured"); + command_print(CMD, "current target doesn't have an ETM configured"); return ERROR_FAIL; } @@ -1887,13 +1887,13 @@ COMMAND_HANDLER(handle_etm_stop_command) target = get_current_target(CMD_CTX); arm = target_to_arm(target); if (!is_arm(arm)) { - command_print(CMD_CTX, "ETM: current target isn't an ARM"); + command_print(CMD, "ETM: current target isn't an ARM"); return ERROR_FAIL; } etm_ctx = arm->etm; if (!etm_ctx) { - command_print(CMD_CTX, "current target doesn't have an ETM configured"); + command_print(CMD, "current target doesn't have an ETM configured"); return ERROR_FAIL; } @@ -1923,14 +1923,14 @@ COMMAND_HANDLER(handle_etm_trigger_debug_command) target = get_current_target(CMD_CTX); arm = target_to_arm(target); if (!is_arm(arm)) { - command_print(CMD_CTX, "ETM: %s isn't an ARM", + command_print(CMD, "ETM: %s isn't an ARM", target_name(target)); return ERROR_FAIL; } etm = arm->etm; if (!etm) { - command_print(CMD_CTX, "ETM: no ETM configured for %s", + command_print(CMD, "ETM: no ETM configured for %s", target_name(target)); return ERROR_FAIL; } @@ -1955,7 +1955,7 @@ COMMAND_HANDLER(handle_etm_trigger_debug_command) buf_set_u32(etm_ctrl_reg->value, 0, 32, etm->control); } - command_print(CMD_CTX, "ETM: %s debug halt", + command_print(CMD, "ETM: %s debug halt", (etm->control & ETM_CTRL_DBGRQ) ? "triggers" : "does not trigger"); @@ -1972,13 +1972,13 @@ COMMAND_HANDLER(handle_etm_analyze_command) target = get_current_target(CMD_CTX); arm = target_to_arm(target); if (!is_arm(arm)) { - command_print(CMD_CTX, "ETM: current target isn't an ARM"); + command_print(CMD, "ETM: current target isn't an ARM"); return ERROR_FAIL; } etm_ctx = arm->etm; if (!etm_ctx) { - command_print(CMD_CTX, "current target doesn't have an ETM configured"); + command_print(CMD, "current target doesn't have an ETM configured"); return ERROR_FAIL; } @@ -1987,18 +1987,18 @@ COMMAND_HANDLER(handle_etm_analyze_command) /* FIX! error should be reported inside etmv1_analyze_trace() */ switch (retval) { case ERROR_ETM_ANALYSIS_FAILED: - command_print(CMD_CTX, + command_print(CMD, "further analysis failed (corrupted trace data or just end of data"); break; case ERROR_TRACE_INSTRUCTION_UNAVAILABLE: - command_print(CMD_CTX, + command_print(CMD, "no instruction for current address available, analysis aborted"); break; case ERROR_TRACE_IMAGE_UNAVAILABLE: - command_print(CMD_CTX, "no image available for trace analysis"); + command_print(CMD, "no image available for trace analysis"); break; default: - command_print(CMD_CTX, "unknown error"); + command_print(CMD, "unknown error"); } } diff --git a/src/target/etm_dummy.c b/src/target/etm_dummy.c index 9f18d84a19..ba53c7a828 100644 --- a/src/target/etm_dummy.c +++ b/src/target/etm_dummy.c @@ -37,7 +37,7 @@ COMMAND_HANDLER(handle_etm_dummy_config_command) arm = target_to_arm(target); if (!is_arm(arm)) { - command_print(CMD_CTX, "target '%s' isn't an ARM", CMD_ARGV[0]); + command_print(CMD, "target '%s' isn't an ARM", CMD_ARGV[0]); return ERROR_FAIL; } diff --git a/src/target/mips32.c b/src/target/mips32.c index 9cb24a4472..5260032164 100644 --- a/src/target/mips32.c +++ b/src/target/mips32.c @@ -909,7 +909,7 @@ static int mips32_verify_pointer(struct command_invocation *cmd, struct mips32_common *mips32) { if (mips32->common_magic != MIPS32_COMMON_MAGIC) { - command_print(cmd->ctx, "target is not an MIPS32"); + command_print(cmd, "target is not an MIPS32"); return ERROR_TARGET_INVALID; } return ERROR_OK; @@ -932,7 +932,7 @@ COMMAND_HANDLER(mips32_handle_cp0_command) return retval; if (target->state != TARGET_HALTED) { - command_print(CMD_CTX, "target must be stopped for \"%s\" command", CMD_NAME); + command_print(CMD, "target must be stopped for \"%s\" command", CMD_NAME); return ERROR_OK; } @@ -949,12 +949,12 @@ COMMAND_HANDLER(mips32_handle_cp0_command) retval = mips32_cp0_read(ejtag_info, &value, cp0_reg, cp0_sel); if (retval != ERROR_OK) { - command_print(CMD_CTX, + command_print(CMD, "couldn't access reg %" PRIi32, cp0_reg); return ERROR_OK; } - command_print(CMD_CTX, "cp0 reg %" PRIi32 ", select %" PRIi32 ": %8.8" PRIx32, + command_print(CMD, "cp0 reg %" PRIi32 ", select %" PRIi32 ": %8.8" PRIx32, cp0_reg, cp0_sel, value); } else if (CMD_ARGC == 3) { @@ -962,12 +962,12 @@ COMMAND_HANDLER(mips32_handle_cp0_command) COMMAND_PARSE_NUMBER(u32, CMD_ARGV[2], value); retval = mips32_cp0_write(ejtag_info, value, cp0_reg, cp0_sel); if (retval != ERROR_OK) { - command_print(CMD_CTX, + command_print(CMD, "couldn't access cp0 reg %" PRIi32 ", select %" PRIi32, cp0_reg, cp0_sel); return ERROR_OK; } - command_print(CMD_CTX, "cp0 reg %" PRIi32 ", select %" PRIi32 ": %8.8" PRIx32, + command_print(CMD, "cp0 reg %" PRIi32 ", select %" PRIi32 ": %8.8" PRIx32, cp0_reg, cp0_sel, value); } } @@ -986,13 +986,13 @@ COMMAND_HANDLER(mips32_handle_scan_delay_command) else if (CMD_ARGC > 1) return ERROR_COMMAND_SYNTAX_ERROR; - command_print(CMD_CTX, "scan delay: %d nsec", ejtag_info->scan_delay); + command_print(CMD, "scan delay: %d nsec", ejtag_info->scan_delay); if (ejtag_info->scan_delay >= MIPS32_SCAN_DELAY_LEGACY_MODE) { ejtag_info->mode = 0; - command_print(CMD_CTX, "running in legacy mode"); + command_print(CMD, "running in legacy mode"); } else { ejtag_info->mode = 1; - command_print(CMD_CTX, "running in fast queued mode"); + command_print(CMD, "running in fast queued mode"); } return ERROR_OK; diff --git a/src/target/mips_m4k.c b/src/target/mips_m4k.c index 755ed72e68..ad27520c80 100644 --- a/src/target/mips_m4k.c +++ b/src/target/mips_m4k.c @@ -1274,7 +1274,7 @@ static int mips_m4k_verify_pointer(struct command_invocation *cmd, struct mips_m4k_common *mips_m4k) { if (mips_m4k->common_magic != MIPSM4K_COMMON_MAGIC) { - command_print(cmd->ctx, "target is not an MIPS_M4K"); + command_print(cmd, "target is not an MIPS_M4K"); return ERROR_TARGET_INVALID; } return ERROR_OK; @@ -1292,7 +1292,7 @@ COMMAND_HANDLER(mips_m4k_handle_cp0_command) return retval; if (target->state != TARGET_HALTED) { - command_print(CMD_CTX, "target must be stopped for \"%s\" command", CMD_NAME); + command_print(CMD, "target must be stopped for \"%s\" command", CMD_NAME); return ERROR_OK; } @@ -1308,12 +1308,12 @@ COMMAND_HANDLER(mips_m4k_handle_cp0_command) uint32_t value; retval = mips32_cp0_read(ejtag_info, &value, cp0_reg, cp0_sel); if (retval != ERROR_OK) { - command_print(CMD_CTX, + command_print(CMD, "couldn't access reg %" PRIi32, cp0_reg); return ERROR_OK; } - command_print(CMD_CTX, "cp0 reg %" PRIi32 ", select %" PRIi32 ": %8.8" PRIx32, + command_print(CMD, "cp0 reg %" PRIi32 ", select %" PRIi32 ": %8.8" PRIx32, cp0_reg, cp0_sel, value); } else if (CMD_ARGC == 3) { @@ -1321,12 +1321,12 @@ COMMAND_HANDLER(mips_m4k_handle_cp0_command) COMMAND_PARSE_NUMBER(u32, CMD_ARGV[2], value); retval = mips32_cp0_write(ejtag_info, value, cp0_reg, cp0_sel); if (retval != ERROR_OK) { - command_print(CMD_CTX, + command_print(CMD, "couldn't access cp0 reg %" PRIi32 ", select %" PRIi32, cp0_reg, cp0_sel); return ERROR_OK; } - command_print(CMD_CTX, "cp0 reg %" PRIi32 ", select %" PRIi32 ": %8.8" PRIx32, + command_print(CMD, "cp0 reg %" PRIi32 ", select %" PRIi32 ": %8.8" PRIx32, cp0_reg, cp0_sel, value); } } @@ -1345,13 +1345,13 @@ COMMAND_HANDLER(mips_m4k_handle_scan_delay_command) else if (CMD_ARGC > 1) return ERROR_COMMAND_SYNTAX_ERROR; - command_print(CMD_CTX, "scan delay: %d nsec", ejtag_info->scan_delay); + command_print(CMD, "scan delay: %d nsec", ejtag_info->scan_delay); if (ejtag_info->scan_delay >= MIPS32_SCAN_DELAY_LEGACY_MODE) { ejtag_info->mode = 0; - command_print(CMD_CTX, "running in legacy mode"); + command_print(CMD, "running in legacy mode"); } else { ejtag_info->mode = 1; - command_print(CMD_CTX, "running in fast queued mode"); + command_print(CMD, "running in fast queued mode"); } return ERROR_OK; diff --git a/src/target/nds32_cmd.c b/src/target/nds32_cmd.c index 500651dbc8..1accf6f83c 100644 --- a/src/target/nds32_cmd.c +++ b/src/target/nds32_cmd.c @@ -46,7 +46,7 @@ COMMAND_HANDLER(handle_nds32_dssim_command) struct nds32 *nds32 = target_to_nds32(target); if (!is_nds32(nds32)) { - command_print(CMD_CTX, "current target isn't an Andes core"); + command_print(CMD, "current target isn't an Andes core"); return ERROR_FAIL; } @@ -57,7 +57,7 @@ COMMAND_HANDLER(handle_nds32_dssim_command) nds32->step_isr_enable = false; } - command_print(CMD_CTX, "%s: $INT_MASK.DSSIM: %d", target_name(target), + command_print(CMD, "%s: $INT_MASK.DSSIM: %d", target_name(target), nds32->step_isr_enable); return ERROR_OK; @@ -71,7 +71,7 @@ COMMAND_HANDLER(handle_nds32_memory_access_command) struct nds32_memory *memory = &(nds32->memory); if (!is_nds32(nds32)) { - command_print(CMD_CTX, "current target isn't an Andes core"); + command_print(CMD, "current target isn't an Andes core"); return ERROR_FAIL; } @@ -88,7 +88,7 @@ COMMAND_HANDLER(handle_nds32_memory_access_command) aice_memory_access(aice, memory->access_channel); } else { - command_print(CMD_CTX, "%s: memory access channel: %s", + command_print(CMD, "%s: memory access channel: %s", target_name(target), NDS_MEMORY_ACCESS_NAME[memory->access_channel]); } @@ -103,18 +103,18 @@ COMMAND_HANDLER(handle_nds32_memory_mode_command) struct aice_port_s *aice = target_to_aice(target); if (!is_nds32(nds32)) { - command_print(CMD_CTX, "current target isn't an Andes core"); + command_print(CMD, "current target isn't an Andes core"); return ERROR_FAIL; } if (CMD_ARGC > 0) { if (nds32->edm.access_control == false) { - command_print(CMD_CTX, "%s does not support ACC_CTL. " + command_print(CMD, "%s does not support ACC_CTL. " "Set memory mode to MEMORY", target_name(target)); nds32->memory.mode = NDS_MEMORY_SELECT_MEM; } else if (nds32->edm.direct_access_local_memory == false) { - command_print(CMD_CTX, "%s does not support direct access " + command_print(CMD, "%s does not support direct access " "local memory. Set memory mode to MEMORY", target_name(target)); nds32->memory.mode = NDS_MEMORY_SELECT_MEM; @@ -128,13 +128,13 @@ COMMAND_HANDLER(handle_nds32_memory_mode_command) nds32->memory.mode = NDS_MEMORY_SELECT_MEM; } else if (strcmp(CMD_ARGV[0], "ilm") == 0) { if (nds32->memory.ilm_base == 0) - command_print(CMD_CTX, "%s does not support ILM", + command_print(CMD, "%s does not support ILM", target_name(target)); else nds32->memory.mode = NDS_MEMORY_SELECT_ILM; } else if (strcmp(CMD_ARGV[0], "dlm") == 0) { if (nds32->memory.dlm_base == 0) - command_print(CMD_CTX, "%s does not support DLM", + command_print(CMD, "%s does not support DLM", target_name(target)); else nds32->memory.mode = NDS_MEMORY_SELECT_DLM; @@ -145,7 +145,7 @@ COMMAND_HANDLER(handle_nds32_memory_mode_command) } } - command_print(CMD_CTX, "%s: memory mode: %s", + command_print(CMD, "%s: memory mode: %s", target_name(target), NDS_MEMORY_SELECT_NAME[nds32->memory.mode]); @@ -162,7 +162,7 @@ COMMAND_HANDLER(handle_nds32_cache_command) int result; if (!is_nds32(nds32)) { - command_print(CMD_CTX, "current target isn't an Andes core"); + command_print(CMD, "current target isn't an Andes core"); return ERROR_FAIL; } @@ -173,30 +173,30 @@ COMMAND_HANDLER(handle_nds32_cache_command) /* D$ write back */ result = aice_cache_ctl(aice, AICE_CACHE_CTL_L1D_WBALL, 0); if (result != ERROR_OK) { - command_print(CMD_CTX, "%s: Write back data cache...failed", + command_print(CMD, "%s: Write back data cache...failed", target_name(target)); return result; } - command_print(CMD_CTX, "%s: Write back data cache...done", + command_print(CMD, "%s: Write back data cache...done", target_name(target)); /* D$ invalidate */ result = aice_cache_ctl(aice, AICE_CACHE_CTL_L1D_INVALALL, 0); if (result != ERROR_OK) { - command_print(CMD_CTX, "%s: Invalidate data cache...failed", + command_print(CMD, "%s: Invalidate data cache...failed", target_name(target)); return result; } - command_print(CMD_CTX, "%s: Invalidate data cache...done", + command_print(CMD, "%s: Invalidate data cache...done", target_name(target)); } else { if (dcache->line_size == 0) - command_print(CMD_CTX, "%s: No data cache", + command_print(CMD, "%s: No data cache", target_name(target)); else - command_print(CMD_CTX, "%s: Data cache disabled", + command_print(CMD, "%s: Data cache disabled", target_name(target)); } @@ -204,23 +204,23 @@ COMMAND_HANDLER(handle_nds32_cache_command) /* I$ invalidate */ result = aice_cache_ctl(aice, AICE_CACHE_CTL_L1I_INVALALL, 0); if (result != ERROR_OK) { - command_print(CMD_CTX, "%s: Invalidate instruction cache...failed", + command_print(CMD, "%s: Invalidate instruction cache...failed", target_name(target)); return result; } - command_print(CMD_CTX, "%s: Invalidate instruction cache...done", + command_print(CMD, "%s: Invalidate instruction cache...done", target_name(target)); } else { if (icache->line_size == 0) - command_print(CMD_CTX, "%s: No instruction cache", + command_print(CMD, "%s: No instruction cache", target_name(target)); else - command_print(CMD_CTX, "%s: Instruction cache disabled", + command_print(CMD, "%s: Instruction cache disabled", target_name(target)); } } else - command_print(CMD_CTX, "No valid parameter"); + command_print(CMD, "No valid parameter"); } return ERROR_OK; @@ -235,14 +235,14 @@ COMMAND_HANDLER(handle_nds32_icache_command) int result; if (!is_nds32(nds32)) { - command_print(CMD_CTX, "current target isn't an Andes core"); + command_print(CMD, "current target isn't an Andes core"); return ERROR_FAIL; } if (CMD_ARGC > 0) { if (icache->line_size == 0) { - command_print(CMD_CTX, "%s: No instruction cache", + command_print(CMD, "%s: No instruction cache", target_name(target)); return ERROR_OK; } @@ -252,15 +252,15 @@ COMMAND_HANDLER(handle_nds32_icache_command) /* I$ invalidate */ result = aice_cache_ctl(aice, AICE_CACHE_CTL_L1I_INVALALL, 0); if (result != ERROR_OK) { - command_print(CMD_CTX, "%s: Invalidate instruction cache...failed", + command_print(CMD, "%s: Invalidate instruction cache...failed", target_name(target)); return result; } - command_print(CMD_CTX, "%s: Invalidate instruction cache...done", + command_print(CMD, "%s: Invalidate instruction cache...done", target_name(target)); } else { - command_print(CMD_CTX, "%s: Instruction cache disabled", + command_print(CMD, "%s: Instruction cache disabled", target_name(target)); } } else if (strcmp(CMD_ARGV[0], "enable") == 0) { @@ -274,7 +274,7 @@ COMMAND_HANDLER(handle_nds32_icache_command) } else if (strcmp(CMD_ARGV[0], "dump") == 0) { /* TODO: dump cache content */ } else { - command_print(CMD_CTX, "%s: No valid parameter", target_name(target)); + command_print(CMD, "%s: No valid parameter", target_name(target)); } } @@ -290,14 +290,14 @@ COMMAND_HANDLER(handle_nds32_dcache_command) int result; if (!is_nds32(nds32)) { - command_print(CMD_CTX, "current target isn't an Andes core"); + command_print(CMD, "current target isn't an Andes core"); return ERROR_FAIL; } if (CMD_ARGC > 0) { if (dcache->line_size == 0) { - command_print(CMD_CTX, "%s: No data cache", target_name(target)); + command_print(CMD, "%s: No data cache", target_name(target)); return ERROR_OK; } @@ -306,26 +306,26 @@ COMMAND_HANDLER(handle_nds32_dcache_command) /* D$ write back */ result = aice_cache_ctl(aice, AICE_CACHE_CTL_L1D_WBALL, 0); if (result != ERROR_OK) { - command_print(CMD_CTX, "%s: Write back data cache...failed", + command_print(CMD, "%s: Write back data cache...failed", target_name(target)); return result; } - command_print(CMD_CTX, "%s: Write back data cache...done", + command_print(CMD, "%s: Write back data cache...done", target_name(target)); /* D$ invalidate */ result = aice_cache_ctl(aice, AICE_CACHE_CTL_L1D_INVALALL, 0); if (result != ERROR_OK) { - command_print(CMD_CTX, "%s: Invalidate data cache...failed", + command_print(CMD, "%s: Invalidate data cache...failed", target_name(target)); return result; } - command_print(CMD_CTX, "%s: Invalidate data cache...done", + command_print(CMD, "%s: Invalidate data cache...done", target_name(target)); } else { - command_print(CMD_CTX, "%s: Data cache disabled", + command_print(CMD, "%s: Data cache disabled", target_name(target)); } } else if (strcmp(CMD_ARGV[0], "enable") == 0) { @@ -339,7 +339,7 @@ COMMAND_HANDLER(handle_nds32_dcache_command) } else if (strcmp(CMD_ARGV[0], "dump") == 0) { /* TODO: dump cache content */ } else { - command_print(CMD_CTX, "%s: No valid parameter", target_name(target)); + command_print(CMD, "%s: No valid parameter", target_name(target)); } } @@ -352,7 +352,7 @@ COMMAND_HANDLER(handle_nds32_auto_break_command) struct nds32 *nds32 = target_to_nds32(target); if (!is_nds32(nds32)) { - command_print(CMD_CTX, "current target isn't an Andes core"); + command_print(CMD, "current target isn't an Andes core"); return ERROR_FAIL; } @@ -364,10 +364,10 @@ COMMAND_HANDLER(handle_nds32_auto_break_command) } if (nds32->auto_convert_hw_bp) - command_print(CMD_CTX, "%s: convert sw break to hw break on ROM: on", + command_print(CMD, "%s: convert sw break to hw break on ROM: on", target_name(target)); else - command_print(CMD_CTX, "%s: convert sw break to hw break on ROM: off", + command_print(CMD, "%s: convert sw break to hw break on ROM: off", target_name(target)); return ERROR_OK; @@ -379,7 +379,7 @@ COMMAND_HANDLER(handle_nds32_virtual_hosting_command) struct nds32 *nds32 = target_to_nds32(target); if (!is_nds32(nds32)) { - command_print(CMD_CTX, "current target isn't an Andes core"); + command_print(CMD, "current target isn't an Andes core"); return ERROR_FAIL; } @@ -391,9 +391,9 @@ COMMAND_HANDLER(handle_nds32_virtual_hosting_command) } if (nds32->virtual_hosting) - command_print(CMD_CTX, "%s: virtual hosting: on", target_name(target)); + command_print(CMD, "%s: virtual hosting: on", target_name(target)); else - command_print(CMD_CTX, "%s: virtual hosting: off", target_name(target)); + command_print(CMD, "%s: virtual hosting: off", target_name(target)); return ERROR_OK; } @@ -404,7 +404,7 @@ COMMAND_HANDLER(handle_nds32_global_stop_command) struct nds32 *nds32 = target_to_nds32(target); if (!is_nds32(nds32)) { - command_print(CMD_CTX, "current target isn't an Andes core"); + command_print(CMD, "current target isn't an Andes core"); return ERROR_FAIL; } @@ -429,7 +429,7 @@ COMMAND_HANDLER(handle_nds32_soft_reset_halt_command) struct nds32 *nds32 = target_to_nds32(target); if (!is_nds32(nds32)) { - command_print(CMD_CTX, "current target isn't an Andes core"); + command_print(CMD, "current target isn't an Andes core"); return ERROR_FAIL; } @@ -454,7 +454,7 @@ COMMAND_HANDLER(handle_nds32_boot_time_command) struct nds32 *nds32 = target_to_nds32(target); if (!is_nds32(nds32)) { - command_print(CMD_CTX, "current target isn't an Andes core"); + command_print(CMD, "current target isn't an Andes core"); return ERROR_FAIL; } @@ -470,7 +470,7 @@ COMMAND_HANDLER(handle_nds32_login_edm_passcode_command) struct nds32 *nds32 = target_to_nds32(target); if (!is_nds32(nds32)) { - command_print(CMD_CTX, "current target isn't an Andes core"); + command_print(CMD, "current target isn't an Andes core"); return ERROR_FAIL; } @@ -485,7 +485,7 @@ COMMAND_HANDLER(handle_nds32_login_edm_operation_command) struct nds32 *nds32 = target_to_nds32(target); if (!is_nds32(nds32)) { - command_print(CMD_CTX, "current target isn't an Andes core"); + command_print(CMD, "current target isn't an Andes core"); return ERROR_FAIL; } @@ -516,7 +516,7 @@ COMMAND_HANDLER(handle_nds32_reset_halt_as_init_command) struct nds32 *nds32 = target_to_nds32(target); if (!is_nds32(nds32)) { - command_print(CMD_CTX, "current target isn't an Andes core"); + command_print(CMD, "current target isn't an Andes core"); return ERROR_FAIL; } @@ -536,7 +536,7 @@ COMMAND_HANDLER(handle_nds32_keep_target_edm_ctl_command) struct nds32 *nds32 = target_to_nds32(target); if (!is_nds32(nds32)) { - command_print(CMD_CTX, "current target isn't an Andes core"); + command_print(CMD, "current target isn't an Andes core"); return ERROR_FAIL; } @@ -556,7 +556,7 @@ COMMAND_HANDLER(handle_nds32_decode_command) struct nds32 *nds32 = target_to_nds32(target); if (!is_nds32(nds32)) { - command_print(CMD_CTX, "current target isn't an Andes core"); + command_print(CMD, "current target isn't an Andes core"); return ERROR_FAIL; } @@ -581,7 +581,7 @@ COMMAND_HANDLER(handle_nds32_decode_command) read_addr, &instruction)) return ERROR_FAIL; - command_print(CMD_CTX, "%s", instruction.text); + command_print(CMD, "%s", instruction.text); read_addr += instruction.instruction_size; i++; @@ -599,7 +599,7 @@ COMMAND_HANDLER(handle_nds32_decode_command) if (ERROR_OK != nds32_evaluate_opcode(nds32, opcode, addr, &instruction)) return ERROR_FAIL; - command_print(CMD_CTX, "%s", instruction.text); + command_print(CMD, "%s", instruction.text); } else return ERROR_FAIL; @@ -612,7 +612,7 @@ COMMAND_HANDLER(handle_nds32_word_access_mem_command) struct nds32 *nds32 = target_to_nds32(target); if (!is_nds32(nds32)) { - command_print(CMD_CTX, "current target isn't an Andes core"); + command_print(CMD, "current target isn't an Andes core"); return ERROR_FAIL; } @@ -632,11 +632,11 @@ COMMAND_HANDLER(handle_nds32_query_target_command) struct nds32 *nds32 = target_to_nds32(target); if (!is_nds32(nds32)) { - command_print(CMD_CTX, "current target isn't an Andes core"); + command_print(CMD, "current target isn't an Andes core"); return ERROR_FAIL; } - command_print(CMD_CTX, "OCD"); + command_print(CMD, "OCD"); return ERROR_OK; } @@ -647,7 +647,7 @@ COMMAND_HANDLER(handle_nds32_query_endian_command) struct nds32 *nds32 = target_to_nds32(target); if (!is_nds32(nds32)) { - command_print(CMD_CTX, "current target isn't an Andes core"); + command_print(CMD, "current target isn't an Andes core"); return ERROR_FAIL; } @@ -655,9 +655,9 @@ COMMAND_HANDLER(handle_nds32_query_endian_command) nds32_get_mapped_reg(nds32, IR0, &value_psw); if (value_psw & 0x20) - command_print(CMD_CTX, "%s: BE", target_name(target)); + command_print(CMD, "%s: BE", target_name(target)); else - command_print(CMD_CTX, "%s: LE", target_name(target)); + command_print(CMD, "%s: LE", target_name(target)); return ERROR_OK; } @@ -668,11 +668,11 @@ COMMAND_HANDLER(handle_nds32_query_cpuid_command) struct nds32 *nds32 = target_to_nds32(target); if (!is_nds32(nds32)) { - command_print(CMD_CTX, "current target isn't an Andes core"); + command_print(CMD, "current target isn't an Andes core"); return ERROR_FAIL; } - command_print(CMD_CTX, "CPUID: %s", target_name(target)); + command_print(CMD, "CPUID: %s", target_name(target)); return ERROR_OK; } diff --git a/src/target/oocd_trace.c b/src/target/oocd_trace.c index 627366d5d4..f38916a0ba 100644 --- a/src/target/oocd_trace.c +++ b/src/target/oocd_trace.c @@ -277,7 +277,7 @@ COMMAND_HANDLER(handle_oocd_trace_config_command) target = get_current_target(CMD_CTX); arm = target_to_arm(target); if (!is_arm(arm)) { - command_print(CMD_CTX, "current target isn't an ARM"); + command_print(CMD, "current target isn't an ARM"); return ERROR_FAIL; } @@ -306,17 +306,17 @@ COMMAND_HANDLER(handle_oocd_trace_status_command) arm = target_to_arm(target); if (!is_arm(arm)) { - command_print(CMD_CTX, "current target isn't an ARM"); + command_print(CMD, "current target isn't an ARM"); return ERROR_FAIL; } if (!arm->etm) { - command_print(CMD_CTX, "current target doesn't have an ETM configured"); + command_print(CMD, "current target doesn't have an ETM configured"); return ERROR_FAIL; } if (strcmp(arm->etm->capture_driver->name, "oocd_trace") != 0) { - command_print(CMD_CTX, "current target's ETM capture driver isn't 'oocd_trace'"); + command_print(CMD, "current target's ETM capture driver isn't 'oocd_trace'"); return ERROR_FAIL; } @@ -325,9 +325,9 @@ COMMAND_HANDLER(handle_oocd_trace_status_command) oocd_trace_read_reg(oocd_trace, OOCD_TRACE_STATUS, &status); if (status & 0x8) - command_print(CMD_CTX, "trace clock locked"); + command_print(CMD, "trace clock locked"); else - command_print(CMD_CTX, "no trace clock"); + command_print(CMD, "no trace clock"); return ERROR_OK; } @@ -344,17 +344,17 @@ COMMAND_HANDLER(handle_oocd_trace_resync_command) arm = target_to_arm(target); if (!is_arm(arm)) { - command_print(CMD_CTX, "current target isn't an ARM"); + command_print(CMD, "current target isn't an ARM"); return ERROR_FAIL; } if (!arm->etm) { - command_print(CMD_CTX, "current target doesn't have an ETM configured"); + command_print(CMD, "current target doesn't have an ETM configured"); return ERROR_FAIL; } if (strcmp(arm->etm->capture_driver->name, "oocd_trace") != 0) { - command_print(CMD_CTX, "current target's ETM capture driver isn't 'oocd_trace'"); + command_print(CMD, "current target's ETM capture driver isn't 'oocd_trace'"); return ERROR_FAIL; } @@ -366,7 +366,7 @@ COMMAND_HANDLER(handle_oocd_trace_resync_command) if (bytes_written < 1) return ERROR_FAIL; - command_print(CMD_CTX, "requesting traceclock resync"); + command_print(CMD, "requesting traceclock resync"); LOG_DEBUG("resyncing traceclk pll"); return ERROR_OK; diff --git a/src/target/openrisc/or1k.c b/src/target/openrisc/or1k.c index 1cecebd306..1e5db8c619 100644 --- a/src/target/openrisc/or1k.c +++ b/src/target/openrisc/or1k.c @@ -1291,7 +1291,7 @@ COMMAND_HANDLER(or1k_tap_list_command_handler) list_for_each_entry(or1k_tap, &tap_list, list) { if (or1k_tap->name) - command_print(CMD_CTX, "%s", or1k_tap->name); + command_print(CMD, "%s", or1k_tap->name); } return ERROR_OK; @@ -1339,7 +1339,7 @@ COMMAND_HANDLER(or1k_du_list_command_handler) list_for_each_entry(or1k_du, &du_list, list) { if (or1k_du->name) - command_print(CMD_CTX, "%s", or1k_du->name); + command_print(CMD, "%s", or1k_du->name); } return ERROR_OK; diff --git a/src/target/riscv/riscv.c b/src/target/riscv/riscv.c index 44da5a9e65..8b5a361bb8 100644 --- a/src/target/riscv/riscv.c +++ b/src/target/riscv/riscv.c @@ -1623,7 +1623,7 @@ COMMAND_HANDLER(riscv_authdata_read) uint32_t value; if (r->authdata_read(target, &value) != ERROR_OK) return ERROR_FAIL; - command_print(CMD_CTX, "0x%" PRIx32, value); + command_print(CMD, "0x%" PRIx32, value); return ERROR_OK; } else { LOG_ERROR("authdata_read is not implemented for this target."); @@ -1676,7 +1676,7 @@ COMMAND_HANDLER(riscv_dmi_read) COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], address); if (r->dmi_read(target, &value, address) != ERROR_OK) return ERROR_FAIL; - command_print(CMD_CTX, "0x%" PRIx32, value); + command_print(CMD, "0x%" PRIx32, value); return ERROR_OK; } else { LOG_ERROR("dmi_read is not implemented for this target."); diff --git a/src/target/semihosting_common.c b/src/target/semihosting_common.c index 59207897a4..ce6a791717 100644 --- a/src/target/semihosting_common.c +++ b/src/target/semihosting_common.c @@ -1470,7 +1470,7 @@ __COMMAND_HANDLER(handle_common_semihosting_command) struct semihosting *semihosting = target->semihosting; if (!semihosting) { - command_print(CMD_CTX, "semihosting not supported for current target"); + command_print(CMD, "semihosting not supported for current target"); return ERROR_FAIL; } @@ -1493,7 +1493,7 @@ __COMMAND_HANDLER(handle_common_semihosting_command) semihosting->is_active = is_active; } - command_print(CMD_CTX, "semihosting is %s", + command_print(CMD, "semihosting is %s", semihosting->is_active ? "enabled" : "disabled"); @@ -1512,19 +1512,19 @@ __COMMAND_HANDLER(handle_common_semihosting_fileio_command) struct semihosting *semihosting = target->semihosting; if (!semihosting) { - command_print(CMD_CTX, "semihosting not supported for current target"); + command_print(CMD, "semihosting not supported for current target"); return ERROR_FAIL; } if (!semihosting->is_active) { - command_print(CMD_CTX, "semihosting not yet enabled for current target"); + command_print(CMD, "semihosting not yet enabled for current target"); return ERROR_FAIL; } if (CMD_ARGC > 0) COMMAND_PARSE_ENABLE(CMD_ARGV[0], semihosting->is_fileio); - command_print(CMD_CTX, "semihosting fileio is %s", + command_print(CMD, "semihosting fileio is %s", semihosting->is_fileio ? "enabled" : "disabled"); @@ -1543,7 +1543,7 @@ __COMMAND_HANDLER(handle_common_semihosting_cmdline) struct semihosting *semihosting = target->semihosting; if (!semihosting) { - command_print(CMD_CTX, "semihosting not supported for current target"); + command_print(CMD, "semihosting not supported for current target"); return ERROR_FAIL; } @@ -1558,7 +1558,7 @@ __COMMAND_HANDLER(handle_common_semihosting_cmdline) semihosting->cmdline = cmdline; } - command_print(CMD_CTX, "semihosting command line is [%s]", + command_print(CMD, "semihosting command line is [%s]", semihosting->cmdline); return ERROR_OK; @@ -1575,19 +1575,19 @@ __COMMAND_HANDLER(handle_common_semihosting_resumable_exit_command) struct semihosting *semihosting = target->semihosting; if (!semihosting) { - command_print(CMD_CTX, "semihosting not supported for current target"); + command_print(CMD, "semihosting not supported for current target"); return ERROR_FAIL; } if (!semihosting->is_active) { - command_print(CMD_CTX, "semihosting not yet enabled for current target"); + command_print(CMD, "semihosting not yet enabled for current target"); return ERROR_FAIL; } if (CMD_ARGC > 0) COMMAND_PARSE_ENABLE(CMD_ARGV[0], semihosting->has_resumable_exit); - command_print(CMD_CTX, "semihosting resumable exit is %s", + command_print(CMD, "semihosting resumable exit is %s", semihosting->has_resumable_exit ? "enabled" : "disabled"); diff --git a/src/target/smp.c b/src/target/smp.c index f42d8abedc..acd4628e2e 100644 --- a/src/target/smp.c +++ b/src/target/smp.c @@ -106,7 +106,7 @@ COMMAND_HANDLER(default_handle_smp_command) return ERROR_COMMAND_SYNTAX_ERROR; if (!CMD_ARGC) { - command_print(CMD_CTX, "%s", target->smp ? "on" : "off"); + command_print(CMD, "%s", target->smp ? "on" : "off"); return ERROR_OK; } @@ -166,7 +166,7 @@ COMMAND_HANDLER(handle_smp_gdb_command) target->gdb_service->core[1] = coreid; } - command_print(CMD_CTX, "gdb coreid %" PRId32 " -> %" PRId32, target->gdb_service->core[0] + command_print(CMD, "gdb coreid %" PRId32 " -> %" PRId32, target->gdb_service->core[0] , target->gdb_service->core[1]); } return ERROR_OK; diff --git a/src/target/stm8.c b/src/target/stm8.c index b62ff131de..fcfc1707e0 100644 --- a/src/target/stm8.c +++ b/src/target/stm8.c @@ -2147,7 +2147,7 @@ COMMAND_HANDLER(stm8_handle_enable_step_irq_command) stm8->enable_step_irq = enable; } msg = stm8->enable_step_irq ? "enabled" : "disabled"; - command_print(CMD_CTX, "enable_step_irq = %s", msg); + command_print(CMD, "enable_step_irq = %s", msg); return ERROR_OK; } @@ -2163,7 +2163,7 @@ COMMAND_HANDLER(stm8_handle_enable_stm8l_command) stm8->enable_stm8l = enable; } msg = stm8->enable_stm8l ? "enabled" : "disabled"; - command_print(CMD_CTX, "enable_stm8l = %s", msg); + command_print(CMD, "enable_stm8l = %s", msg); stm8_init_flash_regs(stm8->enable_stm8l, stm8); return ERROR_OK; } diff --git a/src/target/target.c b/src/target/target.c index 58864ce2c9..20bf26b5dd 100644 --- a/src/target/target.c +++ b/src/target/target.c @@ -670,7 +670,7 @@ static int target_process_reset(struct command_invocation *cmd, enum target_rese if (retval != JIM_OK) { Jim_MakeErrorMessage(cmd->ctx->interp); - command_print(cmd->ctx, "%s", Jim_GetString(Jim_GetResult(cmd->ctx->interp), NULL)); + command_print(cmd, "%s", Jim_GetString(Jim_GetResult(cmd->ctx->interp), NULL)); return ERROR_FAIL; } @@ -2612,8 +2612,8 @@ COMMAND_HANDLER(handle_targets_command) } struct target *target = all_targets; - command_print(CMD_CTX, " TargetName Type Endian TapName State "); - command_print(CMD_CTX, "-- ------------------ ---------- ------ ------------------ ------------"); + command_print(CMD, " TargetName Type Endian TapName State "); + command_print(CMD, "-- ------------------ ---------- ------ ------------------ ------------"); while (target) { const char *state; char marker = ' '; @@ -2627,7 +2627,7 @@ COMMAND_HANDLER(handle_targets_command) marker = '*'; /* keep columns lined up to match the headers above */ - command_print(CMD_CTX, + command_print(CMD, "%2d%c %-18s %-10s %-6s %-18s %s", target->target_number, marker, @@ -2837,7 +2837,7 @@ COMMAND_HANDLER(handle_reg_command) while (cache) { unsigned i; - command_print(CMD_CTX, "===== %s", cache->name); + command_print(CMD, "===== %s", cache->name); for (i = 0, reg = cache->reg_list; i < cache->num_regs; @@ -2848,7 +2848,7 @@ COMMAND_HANDLER(handle_reg_command) if (reg->valid) { value = buf_to_str(reg->value, reg->size, 16); - command_print(CMD_CTX, + command_print(CMD, "(%i) %s (/%" PRIu32 "): 0x%s%s", count, reg->name, reg->size, value, @@ -2857,7 +2857,7 @@ COMMAND_HANDLER(handle_reg_command) : ""); free(value); } else { - command_print(CMD_CTX, "(%i) %s (/%" PRIu32 ")", + command_print(CMD, "(%i) %s (/%" PRIu32 ")", count, reg->name, reg->size) ; } @@ -2889,7 +2889,7 @@ COMMAND_HANDLER(handle_reg_command) } if (!reg) { - command_print(CMD_CTX, "%i is out of bounds, the current target " + command_print(CMD, "%i is out of bounds, the current target " "has only %i registers (0 - %i)", num, count, count - 1); return ERROR_OK; } @@ -2915,7 +2915,7 @@ COMMAND_HANDLER(handle_reg_command) if (reg->valid == 0) reg->type->get(reg); value = buf_to_str(reg->value, reg->size, 16); - command_print(CMD_CTX, "%s (/%i): 0x%s", reg->name, (int)(reg->size), value); + command_print(CMD, "%s (/%i): 0x%s", reg->name, (int)(reg->size), value); free(value); return ERROR_OK; } @@ -2930,7 +2930,7 @@ COMMAND_HANDLER(handle_reg_command) reg->type->set(reg, buf); value = buf_to_str(reg->value, reg->size, 16); - command_print(CMD_CTX, "%s (/%i): 0x%s", reg->name, (int)(reg->size), value); + command_print(CMD, "%s (/%i): 0x%s", reg->name, (int)(reg->size), value); free(value); free(buf); @@ -2941,7 +2941,7 @@ COMMAND_HANDLER(handle_reg_command) return ERROR_COMMAND_SYNTAX_ERROR; not_found: - command_print(CMD_CTX, "register %s not found in current target", CMD_ARGV[0]); + command_print(CMD, "register %s not found in current target", CMD_ARGV[0]); return ERROR_OK; } @@ -2951,9 +2951,9 @@ COMMAND_HANDLER(handle_poll_command) struct target *target = get_current_target(CMD_CTX); if (CMD_ARGC == 0) { - command_print(CMD_CTX, "background polling: %s", + command_print(CMD, "background polling: %s", jtag_poll_get_enabled() ? "on" : "off"); - command_print(CMD_CTX, "TAP: %s (%s)", + command_print(CMD, "TAP: %s (%s)", target->tap->dotted_name, target->tap->enabled ? "enabled" : "disabled"); if (!target->tap->enabled) @@ -3183,7 +3183,7 @@ static void handle_md_output(struct command_invocation *cmd, value_fmt, value); if ((i % line_modulo == line_modulo - 1) || (i == count - 1)) { - command_print(cmd->ctx, "%s", output); + command_print(cmd, "%s", output); output_len = 0; } } @@ -3413,7 +3413,7 @@ COMMAND_HANDLER(handle_load_image_command) for (i = 0; i < image.num_sections; i++) { buffer = malloc(image.sections[i].size); if (buffer == NULL) { - command_print(CMD_CTX, + command_print(CMD, "error allocating buffer for section (%d bytes)", (int)(image.sections[i].size)); retval = ERROR_FAIL; @@ -3450,7 +3450,7 @@ COMMAND_HANDLER(handle_load_image_command) break; } image_size += length; - command_print(CMD_CTX, "%u bytes written at address " TARGET_ADDR_FMT "", + command_print(CMD, "%u bytes written at address " TARGET_ADDR_FMT "", (unsigned int)length, image.sections[i].base_address + offset); } @@ -3459,7 +3459,7 @@ COMMAND_HANDLER(handle_load_image_command) } if ((ERROR_OK == retval) && (duration_measure(&bench) == ERROR_OK)) { - command_print(CMD_CTX, "downloaded %" PRIu32 " bytes " + command_print(CMD, "downloaded %" PRIu32 " bytes " "in %fs (%0.3f KiB/s)", image_size, duration_elapsed(&bench), duration_kbps(&bench, image_size)); } @@ -3520,7 +3520,7 @@ COMMAND_HANDLER(handle_dump_image_command) retval = fileio_size(fileio, &filesize); if (retval != ERROR_OK) return retval; - command_print(CMD_CTX, + command_print(CMD, "dumped %zu bytes in %fs (%0.3f KiB/s)", filesize, duration_elapsed(&bench), duration_kbps(&bench, filesize)); } @@ -3585,7 +3585,7 @@ static COMMAND_HELPER(handle_verify_image_command_internal, enum verify_mode ver for (i = 0; i < image.num_sections; i++) { buffer = malloc(image.sections[i].size); if (buffer == NULL) { - command_print(CMD_CTX, + command_print(CMD, "error allocating buffer for section (%d bytes)", (int)(image.sections[i].size)); break; @@ -3636,14 +3636,14 @@ static COMMAND_HELPER(handle_verify_image_command_internal, enum verify_mode ver uint32_t t; for (t = 0; t < buf_cnt; t++) { if (data[t] != buffer[t]) { - command_print(CMD_CTX, + command_print(CMD, "diff %d address 0x%08x. Was 0x%02x instead of 0x%02x", diffs, (unsigned)(t + image.sections[i].base_address), data[t], buffer[t]); if (diffs++ >= 127) { - command_print(CMD_CTX, "More than 128 errors, the rest are not printed."); + command_print(CMD, "More than 128 errors, the rest are not printed."); free(data); free(buffer); goto done; @@ -3655,7 +3655,7 @@ static COMMAND_HELPER(handle_verify_image_command_internal, enum verify_mode ver free(data); } } else { - command_print(CMD_CTX, "address " TARGET_ADDR_FMT " length 0x%08zx", + command_print(CMD, "address " TARGET_ADDR_FMT " length 0x%08zx", image.sections[i].base_address, buf_cnt); } @@ -3664,12 +3664,12 @@ static COMMAND_HELPER(handle_verify_image_command_internal, enum verify_mode ver image_size += buf_cnt; } if (diffs > 0) - command_print(CMD_CTX, "No more differences found."); + command_print(CMD, "No more differences found."); done: if (diffs > 0) retval = ERROR_FAIL; if ((ERROR_OK == retval) && (duration_measure(&bench) == ERROR_OK)) { - command_print(CMD_CTX, "verified %" PRIu32 " bytes " + command_print(CMD, "verified %" PRIu32 " bytes " "in %fs (%0.3f KiB/s)", image_size, duration_elapsed(&bench), duration_kbps(&bench, image_size)); } @@ -3702,24 +3702,24 @@ static int handle_bp_command_list(struct command_invocation *cmd) if (breakpoint->type == BKPT_SOFT) { char *buf = buf_to_str(breakpoint->orig_instr, breakpoint->length, 16); - command_print(cmd->ctx, "IVA breakpoint: " TARGET_ADDR_FMT ", 0x%x, %i, 0x%s", + command_print(cmd, "IVA breakpoint: " TARGET_ADDR_FMT ", 0x%x, %i, 0x%s", breakpoint->address, breakpoint->length, breakpoint->set, buf); free(buf); } else { if ((breakpoint->address == 0) && (breakpoint->asid != 0)) - command_print(cmd->ctx, "Context breakpoint: 0x%8.8" PRIx32 ", 0x%x, %i", + command_print(cmd, "Context breakpoint: 0x%8.8" PRIx32 ", 0x%x, %i", breakpoint->asid, breakpoint->length, breakpoint->set); else if ((breakpoint->address != 0) && (breakpoint->asid != 0)) { - command_print(cmd->ctx, "Hybrid breakpoint(IVA): " TARGET_ADDR_FMT ", 0x%x, %i", + command_print(cmd, "Hybrid breakpoint(IVA): " TARGET_ADDR_FMT ", 0x%x, %i", breakpoint->address, breakpoint->length, breakpoint->set); - command_print(cmd->ctx, "\t|--->linked with ContextID: 0x%8.8" PRIx32, + command_print(cmd, "\t|--->linked with ContextID: 0x%8.8" PRIx32, breakpoint->asid); } else - command_print(cmd->ctx, "Breakpoint(IVA): " TARGET_ADDR_FMT ", 0x%x, %i", + command_print(cmd, "Breakpoint(IVA): " TARGET_ADDR_FMT ", 0x%x, %i", breakpoint->address, breakpoint->length, breakpoint->set); } @@ -3739,7 +3739,7 @@ static int handle_bp_command_set(struct command_invocation *cmd, retval = breakpoint_add(target, addr, length, hw); /* error is always logged in breakpoint_add(), do not print it again */ if (ERROR_OK == retval) - command_print(cmd->ctx, "breakpoint set at " TARGET_ADDR_FMT "", addr); + command_print(cmd, "breakpoint set at " TARGET_ADDR_FMT "", addr); } else if (addr == 0) { if (target->type->add_context_breakpoint == NULL) { @@ -3749,7 +3749,7 @@ static int handle_bp_command_set(struct command_invocation *cmd, retval = context_breakpoint_add(target, asid, length, hw); /* error is always logged in context_breakpoint_add(), do not print it again */ if (ERROR_OK == retval) - command_print(cmd->ctx, "Context breakpoint set at 0x%8.8" PRIx32 "", asid); + command_print(cmd, "Context breakpoint set at 0x%8.8" PRIx32 "", asid); } else { if (target->type->add_hybrid_breakpoint == NULL) { @@ -3759,7 +3759,7 @@ static int handle_bp_command_set(struct command_invocation *cmd, retval = hybrid_breakpoint_add(target, addr, asid, length, hw); /* error is always logged in hybrid_breakpoint_add(), do not print it again */ if (ERROR_OK == retval) - command_print(cmd->ctx, "Hybrid breakpoint set at 0x%8.8" PRIx32 "", asid); + command_print(cmd, "Hybrid breakpoint set at 0x%8.8" PRIx32 "", asid); } return retval; } @@ -3830,7 +3830,7 @@ COMMAND_HANDLER(handle_wp_command) struct watchpoint *watchpoint = target->watchpoints; while (watchpoint) { - command_print(CMD_CTX, "address: " TARGET_ADDR_FMT + command_print(CMD, "address: " TARGET_ADDR_FMT ", len: 0x%8.8" PRIx32 ", r/w/a: %i, value: 0x%8.8" PRIx32 ", mask: 0x%8.8" PRIx32, @@ -3922,7 +3922,7 @@ COMMAND_HANDLER(handle_virt2phys_command) struct target *target = get_current_target(CMD_CTX); int retval = target->type->virt2phys(target, va, &pa); if (retval == ERROR_OK) - command_print(CMD_CTX, "Physical address " TARGET_ADDR_FMT "", pa); + command_print(CMD, "Physical address " TARGET_ADDR_FMT "", pa); return retval; } @@ -4115,7 +4115,7 @@ COMMAND_HANDLER(handle_profile_command) write_gmon(samples, num_of_samples, CMD_ARGV[1], with_range, start_address, end_address, target, duration_ms); - command_print(CMD_CTX, "Wrote %s", CMD_ARGV[1]); + command_print(CMD, "Wrote %s", CMD_ARGV[1]); free(samples); return retval; @@ -5152,19 +5152,19 @@ COMMAND_HANDLER(handle_target_event_list) struct target *target = get_current_target(CMD_CTX); struct target_event_action *teap = target->event_action; - command_print(CMD_CTX, "Event actions for target (%d) %s\n", + command_print(CMD, "Event actions for target (%d) %s\n", target->target_number, target_name(target)); - command_print(CMD_CTX, "%-25s | Body", "Event"); - command_print(CMD_CTX, "------------------------- | " + command_print(CMD, "%-25s | Body", "Event"); + command_print(CMD, "------------------------- | " "----------------------------------------"); while (teap) { Jim_Nvp *opt = Jim_Nvp_value2name_simple(nvp_target_event, teap->event); - command_print(CMD_CTX, "%-25s | %s", + command_print(CMD, "%-25s | %s", opt->name, Jim_GetString(teap->body, NULL)); teap = teap->next; } - command_print(CMD_CTX, "***END***"); + command_print(CMD, "***END***"); return ERROR_OK; } static int jim_target_current_state(Jim_Interp *interp, int argc, Jim_Obj *const *argv) @@ -5776,7 +5776,7 @@ COMMAND_HANDLER(handle_fast_load_image_command) fastload_num = image.num_sections; fastload = malloc(sizeof(struct FastLoad)*image.num_sections); if (fastload == NULL) { - command_print(CMD_CTX, "out of memory"); + command_print(CMD, "out of memory"); image_close(&image); return ERROR_FAIL; } @@ -5784,7 +5784,7 @@ COMMAND_HANDLER(handle_fast_load_image_command) for (i = 0; i < image.num_sections; i++) { buffer = malloc(image.sections[i].size); if (buffer == NULL) { - command_print(CMD_CTX, "error allocating buffer for section (%d bytes)", + command_print(CMD, "error allocating buffer for section (%d bytes)", (int)(image.sections[i].size)); retval = ERROR_FAIL; break; @@ -5816,7 +5816,7 @@ COMMAND_HANDLER(handle_fast_load_image_command) fastload[i].data = malloc(length); if (fastload[i].data == NULL) { free(buffer); - command_print(CMD_CTX, "error allocating buffer for section (%" PRIu32 " bytes)", + command_print(CMD, "error allocating buffer for section (%" PRIu32 " bytes)", length); retval = ERROR_FAIL; break; @@ -5825,7 +5825,7 @@ COMMAND_HANDLER(handle_fast_load_image_command) fastload[i].length = length; image_size += length; - command_print(CMD_CTX, "%u bytes written at address 0x%8.8x", + command_print(CMD, "%u bytes written at address 0x%8.8x", (unsigned int)length, ((unsigned int)(image.sections[i].base_address + offset))); } @@ -5834,11 +5834,11 @@ COMMAND_HANDLER(handle_fast_load_image_command) } if ((ERROR_OK == retval) && (duration_measure(&bench) == ERROR_OK)) { - command_print(CMD_CTX, "Loaded %" PRIu32 " bytes " + command_print(CMD, "Loaded %" PRIu32 " bytes " "in %fs (%0.3f KiB/s)", image_size, duration_elapsed(&bench), duration_kbps(&bench, image_size)); - command_print(CMD_CTX, + command_print(CMD, "WARNING: image has not been loaded to target!" "You can issue a 'fast_load' to finish loading."); } @@ -5865,7 +5865,7 @@ COMMAND_HANDLER(handle_fast_load_command) int retval = ERROR_OK; for (i = 0; i < fastload_num; i++) { struct target *target = get_current_target(CMD_CTX); - command_print(CMD_CTX, "Write to 0x%08x, length 0x%08x", + command_print(CMD, "Write to 0x%08x, length 0x%08x", (unsigned int)(fastload[i].address), (unsigned int)(fastload[i].length)); retval = target_write_buffer(target, fastload[i].address, fastload[i].length, fastload[i].data); @@ -5875,7 +5875,7 @@ COMMAND_HANDLER(handle_fast_load_command) } if (retval == ERROR_OK) { int64_t after = timeval_ms(); - command_print(CMD_CTX, "Loaded image %f kBytes/s", (float)(size/1024.0)/((float)(after-ms)/1000.0)); + command_print(CMD, "Loaded image %f kBytes/s", (float)(size/1024.0)/((float)(after-ms)/1000.0)); } return retval; } @@ -5930,7 +5930,7 @@ COMMAND_HANDLER(handle_ps_command) if ((target->rtos) && (target->rtos->type) && (target->rtos->type->ps_command)) { display = target->rtos->type->ps_command(target); - command_print(CMD_CTX, "%s", display); + command_print(CMD, "%s", display); free(display); return ERROR_OK; } else { @@ -5942,10 +5942,10 @@ COMMAND_HANDLER(handle_ps_command) static void binprint(struct command_invocation *cmd, const char *text, const uint8_t *buf, int size) { if (text != NULL) - command_print_sameline(cmd->ctx, "%s", text); + command_print_sameline(cmd, "%s", text); for (int i = 0; i < size; i++) - command_print_sameline(cmd->ctx, " %02x", buf[i]); - command_print(cmd->ctx, " "); + command_print_sameline(cmd, " %02x", buf[i]); + command_print(cmd, " "); } COMMAND_HANDLER(handle_test_mem_access_command) @@ -5997,7 +5997,7 @@ COMMAND_HANDLER(handle_test_mem_access_command) read_ref[i] = rand(); read_buf[i] = read_ref[i]; } - command_print_sameline(CMD_CTX, + command_print_sameline(CMD, "Test read %" PRIu32 " x %d @ %d to %saligned buffer: ", count, size, offset, host_offset ? "un" : ""); @@ -6010,10 +6010,10 @@ COMMAND_HANDLER(handle_test_mem_access_command) duration_measure(&bench); if (retval == ERROR_TARGET_UNALIGNED_ACCESS) { - command_print(CMD_CTX, "Unsupported alignment"); + command_print(CMD, "Unsupported alignment"); goto next; } else if (retval != ERROR_OK) { - command_print(CMD_CTX, "Memory read failed"); + command_print(CMD, "Memory read failed"); goto next; } @@ -6023,11 +6023,11 @@ COMMAND_HANDLER(handle_test_mem_access_command) /* check result */ int result = memcmp(read_ref, read_buf, host_bufsiz); if (result == 0) { - command_print(CMD_CTX, "Pass in %fs (%0.3f KiB/s)", + command_print(CMD, "Pass in %fs (%0.3f KiB/s)", duration_elapsed(&bench), duration_kbps(&bench, count * size)); } else { - command_print(CMD_CTX, "Compare failed"); + command_print(CMD, "Compare failed"); binprint(CMD, "ref:", read_ref, host_bufsiz); binprint(CMD, "buf:", read_buf, host_bufsiz); } @@ -6069,13 +6069,13 @@ out: for (size_t i = 0; i < host_bufsiz; i++) write_buf[i] = rand(); - command_print_sameline(CMD_CTX, + command_print_sameline(CMD, "Test write %" PRIu32 " x %d @ %d from %saligned buffer: ", count, size, offset, host_offset ? "un" : ""); retval = target_write_memory(target, wa->address, 1, num_bytes, test_pattern); if (retval != ERROR_OK) { - command_print(CMD_CTX, "Test pattern write failed"); + command_print(CMD, "Test pattern write failed"); goto nextw; } @@ -6092,28 +6092,28 @@ out: duration_measure(&bench); if (retval == ERROR_TARGET_UNALIGNED_ACCESS) { - command_print(CMD_CTX, "Unsupported alignment"); + command_print(CMD, "Unsupported alignment"); goto nextw; } else if (retval != ERROR_OK) { - command_print(CMD_CTX, "Memory write failed"); + command_print(CMD, "Memory write failed"); goto nextw; } /* read back */ retval = target_read_memory(target, wa->address, 1, num_bytes, read_buf); if (retval != ERROR_OK) { - command_print(CMD_CTX, "Test pattern write failed"); + command_print(CMD, "Test pattern write failed"); goto nextw; } /* check result */ int result = memcmp(read_ref, read_buf, num_bytes); if (result == 0) { - command_print(CMD_CTX, "Pass in %fs (%0.3f KiB/s)", + command_print(CMD, "Pass in %fs (%0.3f KiB/s)", duration_elapsed(&bench), duration_kbps(&bench, count * size)); } else { - command_print(CMD_CTX, "Compare failed"); + command_print(CMD, "Compare failed"); binprint(CMD, "ref:", read_ref, num_bytes); binprint(CMD, "buf:", read_buf, num_bytes); } diff --git a/src/target/target_request.c b/src/target/target_request.c index 2df29587fc..c1da1a20e9 100644 --- a/src/target/target_request.c +++ b/src/target/target_request.c @@ -283,7 +283,7 @@ COMMAND_HANDLER(handle_target_request_debugmsgs_command) return ERROR_COMMAND_SYNTAX_ERROR; } - command_print(CMD_CTX, "receiving debug messages from current target %s", + command_print(CMD, "receiving debug messages from current target %s", (receiving) ? (charmsg_mode ? "charmsg" : "enabled") : "disabled"); return ERROR_OK; } diff --git a/src/target/trace.c b/src/target/trace.c index 63c477fbfc..943bf1f4fd 100644 --- a/src/target/trace.c +++ b/src/target/trace.c @@ -53,7 +53,7 @@ COMMAND_HANDLER(handle_trace_point_command) uint32_t i; for (i = 0; i < trace->num_trace_points; i++) { - command_print(CMD_CTX, "trace point 0x%8.8" PRIx32 " (%lld times hit)", + command_print(CMD, "trace point 0x%8.8" PRIx32 " (%lld times hit)", trace->trace_points[i].address, (long long)trace->trace_points[i].hit_counter); } @@ -108,14 +108,14 @@ COMMAND_HANDLER(handle_trace_history_command) COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], trace->trace_history_size); trace->trace_history = malloc(sizeof(uint32_t) * trace->trace_history_size); - command_print(CMD_CTX, "new trace history size: %i", (int)(trace->trace_history_size)); + command_print(CMD, "new trace history size: %i", (int)(trace->trace_history_size)); } else { uint32_t i; uint32_t first = 0; uint32_t last = trace->trace_history_pos; if (!trace->trace_history_size) { - command_print(CMD_CTX, "trace history buffer is not allocated"); + command_print(CMD, "trace history buffer is not allocated"); return ERROR_OK; } @@ -128,11 +128,11 @@ COMMAND_HANDLER(handle_trace_history_command) if (trace->trace_history[i % trace->trace_history_size] < trace->num_trace_points) { uint32_t address; address = trace->trace_points[trace->trace_history[i % trace->trace_history_size]].address; - command_print(CMD_CTX, "trace point %i: 0x%8.8" PRIx32 "", + command_print(CMD, "trace point %i: 0x%8.8" PRIx32 "", (int)(trace->trace_history[i % trace->trace_history_size]), address); } else - command_print(CMD_CTX, "trace point %i: -not defined-", + command_print(CMD, "trace point %i: -not defined-", (int)(trace->trace_history[i % trace->trace_history_size])); } } diff --git a/src/target/x86_32_common.c b/src/target/x86_32_common.c index a641ca94f7..b85e451194 100644 --- a/src/target/x86_32_common.c +++ b/src/target/x86_32_common.c @@ -1392,7 +1392,7 @@ static void handle_iod_output(struct command_invocation *cmd, value_fmt, value); if ((i % line_modulo == line_modulo - 1) || (i == count - 1)) { - command_print(cmd->ctx, "%s", output); + command_print(cmd, "%s", output); output_len = 0; } } diff --git a/src/target/xscale.c b/src/target/xscale.c index a090c4b391..093925b627 100644 --- a/src/target/xscale.c +++ b/src/target/xscale.c @@ -142,7 +142,7 @@ static int xscale_verify_pointer(struct command_invocation *cmd, struct xscale_common *xscale) { if (xscale->common_magic != XSCALE_COMMON_MAGIC) { - command_print(cmd->ctx, xscale_not); + command_print(cmd, xscale_not); return ERROR_TARGET_INVALID; } return ERROR_OK; @@ -2658,9 +2658,9 @@ static inline void xscale_display_instruction(struct target *target, uint32_t pc { int retval = xscale_read_instruction(target, pc, instruction); if (retval == ERROR_OK) - command_print(cmd->ctx, "%s", instruction->text); + command_print(cmd, "%s", instruction->text); else - command_print(cmd->ctx, "0x%8.8" PRIx32 "\t", pc); + command_print(cmd, "0x%8.8" PRIx32 "\t", pc); } static int xscale_analyze_trace(struct target *target, struct command_invocation *cmd) @@ -2787,7 +2787,7 @@ static int xscale_analyze_trace(struct target *target, struct command_invocation continue; if (exception) { - command_print(cmd->ctx, "--- exception %i ---", exception); + command_print(cmd, "--- exception %i ---", exception); continue; } @@ -2813,7 +2813,7 @@ static int xscale_analyze_trace(struct target *target, struct command_invocation } if (current_pc == 0) - command_print(cmd->ctx, "address unknown"); + command_print(cmd, "address unknown"); continue; } @@ -3136,7 +3136,7 @@ COMMAND_HANDLER(xscale_handle_mmu_command) return retval; if (target->state != TARGET_HALTED) { - command_print(CMD_CTX, "target must be stopped for \"%s\" command", CMD_NAME); + command_print(CMD, "target must be stopped for \"%s\" command", CMD_NAME); return ERROR_OK; } @@ -3150,7 +3150,7 @@ COMMAND_HANDLER(xscale_handle_mmu_command) xscale->armv4_5_mmu.mmu_enabled = enable; } - command_print(CMD_CTX, "mmu %s", + command_print(CMD, "mmu %s", (xscale->armv4_5_mmu.mmu_enabled) ? "enabled" : "disabled"); return ERROR_OK; @@ -3166,7 +3166,7 @@ COMMAND_HANDLER(xscale_handle_idcache_command) return retval; if (target->state != TARGET_HALTED) { - command_print(CMD_CTX, "target must be stopped for \"%s\" command", CMD_NAME); + command_print(CMD, "target must be stopped for \"%s\" command", CMD_NAME); return ERROR_OK; } @@ -3195,7 +3195,7 @@ COMMAND_HANDLER(xscale_handle_idcache_command) xscale->armv4_5_mmu.armv4_5_cache.i_cache_enabled : xscale->armv4_5_mmu.armv4_5_cache.d_u_cache_enabled; const char *msg = enabled ? "enabled" : "disabled"; - command_print(CMD_CTX, "%s %s", CMD_NAME, msg); + command_print(CMD, "%s %s", CMD_NAME, msg); return ERROR_OK; } @@ -3257,7 +3257,7 @@ COMMAND_HANDLER(xscale_handle_vector_catch_command) dcsr_value = buf_get_u32(dcsr_reg->value, 0, 32); for (unsigned i = 0; i < ARRAY_SIZE(vec_ids); i++) { - command_print(CMD_CTX, "%15s: %s", vec_ids[i].name, + command_print(CMD, "%15s: %s", vec_ids[i].name, (dcsr_value & vec_ids[i].mask) ? "catch" : "ignore"); } @@ -3279,16 +3279,16 @@ COMMAND_HANDLER(xscale_handle_vector_table_command) if (CMD_ARGC == 0) { /* print current settings */ int idx; - command_print(CMD_CTX, "active user-set static vectors:"); + command_print(CMD, "active user-set static vectors:"); for (idx = 1; idx < 8; idx++) if (xscale->static_low_vectors_set & (1 << idx)) - command_print(CMD_CTX, + command_print(CMD, "low %d: 0x%" PRIx32, idx, xscale->static_low_vectors[idx]); for (idx = 1; idx < 8; idx++) if (xscale->static_high_vectors_set & (1 << idx)) - command_print(CMD_CTX, + command_print(CMD, "high %d: 0x%" PRIx32, idx, xscale->static_high_vectors[idx]); @@ -3335,7 +3335,7 @@ COMMAND_HANDLER(xscale_handle_trace_buffer_command) return retval; if (target->state != TARGET_HALTED) { - command_print(CMD_CTX, "target must be stopped for \"%s\" command", CMD_NAME); + command_print(CMD, "target must be stopped for \"%s\" command", CMD_NAME); return ERROR_OK; } @@ -3354,7 +3354,7 @@ COMMAND_HANDLER(xscale_handle_trace_buffer_command) if (CMD_ARGC >= 3) COMMAND_PARSE_NUMBER(int, CMD_ARGV[2], buffcount); if (buffcount < 1) { /* invalid */ - command_print(CMD_CTX, "fill buffer count must be > 0"); + command_print(CMD, "fill buffer count must be > 0"); xscale->trace.mode = XSCALE_TRACE_DISABLED; return ERROR_COMMAND_SYNTAX_ERROR; } @@ -3371,11 +3371,11 @@ COMMAND_HANDLER(xscale_handle_trace_buffer_command) if (xscale->trace.mode != XSCALE_TRACE_DISABLED) { char fill_string[12]; sprintf(fill_string, "fill %d", xscale->trace.buffer_fill); - command_print(CMD_CTX, "trace buffer enabled (%s)", + command_print(CMD, "trace buffer enabled (%s)", (xscale->trace.mode == XSCALE_TRACE_FILL) ? fill_string : "wrap"); } else - command_print(CMD_CTX, "trace buffer disabled"); + command_print(CMD, "trace buffer disabled"); dcsr_value = buf_get_u32(xscale->reg_cache->reg_list[XSCALE_DCSR].value, 0, 32); if (xscale->trace.mode == XSCALE_TRACE_FILL) @@ -3402,7 +3402,7 @@ COMMAND_HANDLER(xscale_handle_trace_image_command) if (xscale->trace.image) { image_close(xscale->trace.image); free(xscale->trace.image); - command_print(CMD_CTX, "previously loaded image found and closed"); + command_print(CMD, "previously loaded image found and closed"); } xscale->trace.image = malloc(sizeof(struct image)); @@ -3439,7 +3439,7 @@ COMMAND_HANDLER(xscale_handle_dump_trace_command) return retval; if (target->state != TARGET_HALTED) { - command_print(CMD_CTX, "target must be stopped for \"%s\" command", CMD_NAME); + command_print(CMD, "target must be stopped for \"%s\" command", CMD_NAME); return ERROR_OK; } @@ -3449,7 +3449,7 @@ COMMAND_HANDLER(xscale_handle_dump_trace_command) trace_data = xscale->trace.data; if (!trace_data) { - command_print(CMD_CTX, "no trace data collected"); + command_print(CMD, "no trace data collected"); return ERROR_OK; } @@ -3502,7 +3502,7 @@ COMMAND_HANDLER(xscale_handle_cp15) return retval; if (target->state != TARGET_HALTED) { - command_print(CMD_CTX, "target must be stopped for \"%s\" command", CMD_NAME); + command_print(CMD, "target must be stopped for \"%s\" command", CMD_NAME); return ERROR_OK; } uint32_t reg_no = 0; @@ -3536,7 +3536,7 @@ COMMAND_HANDLER(xscale_handle_cp15) reg_no = XSCALE_CPACCESS; break; default: - command_print(CMD_CTX, "invalid register number"); + command_print(CMD, "invalid register number"); return ERROR_COMMAND_SYNTAX_ERROR; } reg = &xscale->reg_cache->reg_list[reg_no]; @@ -3548,7 +3548,7 @@ COMMAND_HANDLER(xscale_handle_cp15) /* read cp15 control register */ xscale_get_reg(reg); value = buf_get_u32(reg->value, 0, 32); - command_print(CMD_CTX, "%s (/%i): 0x%" PRIx32 "", reg->name, (int)(reg->size), + command_print(CMD, "%s (/%i): 0x%" PRIx32 "", reg->name, (int)(reg->size), value); } else if (CMD_ARGC == 2) { uint32_t value; diff --git a/src/transport/transport.c b/src/transport/transport.c index 708594712b..77db9e2109 100644 --- a/src/transport/transport.c +++ b/src/transport/transport.c @@ -258,10 +258,10 @@ COMMAND_HANDLER(handle_transport_list) if (CMD_ARGC != 0) return ERROR_COMMAND_SYNTAX_ERROR; - command_print(CMD_CTX, "The following transports are available:"); + command_print(CMD, "The following transports are available:"); for (struct transport *t = transport_list; t; t = t->next) - command_print(CMD_CTX, "\t%s", t->name); + command_print(CMD, "\t%s", t->name); return ERROR_OK; } diff --git a/src/xsvf/xsvf.c b/src/xsvf/xsvf.c index 63c891511e..e574c6f0e4 100644 --- a/src/xsvf/xsvf.c +++ b/src/xsvf/xsvf.c @@ -249,14 +249,14 @@ COMMAND_HANDLER(handle_xsvf_command) if (strcmp(CMD_ARGV[0], "plain") != 0) { tap = jtag_tap_by_string(CMD_ARGV[0]); if (!tap) { - command_print(CMD_CTX, "Tap: %s unknown", CMD_ARGV[0]); + command_print(CMD, "Tap: %s unknown", CMD_ARGV[0]); return ERROR_FAIL; } } xsvf_fd = open(filename, O_RDONLY); if (xsvf_fd < 0) { - command_print(CMD_CTX, "file \"%s\" not found", filename); + command_print(CMD, "file \"%s\" not found", filename); return ERROR_FAIL; } @@ -1005,7 +1005,7 @@ COMMAND_HANDLER(handle_xsvf_command) } if (tdo_mismatch) { - command_print(CMD_CTX, + command_print(CMD, "TDO mismatch, somewhere near offset %lu in xsvf file, aborting", file_offset); @@ -1014,14 +1014,14 @@ COMMAND_HANDLER(handle_xsvf_command) if (unsupported) { off_t offset = lseek(xsvf_fd, 0, SEEK_CUR) - 1; - command_print(CMD_CTX, + command_print(CMD, "unsupported xsvf command (0x%02X) at offset %jd, aborting", uc, (intmax_t)offset); return ERROR_FAIL; } if (do_abort) { - command_print(CMD_CTX, "premature end of xsvf file detected, aborting"); + command_print(CMD, "premature end of xsvf file detected, aborting"); return ERROR_FAIL; } @@ -1036,7 +1036,7 @@ COMMAND_HANDLER(handle_xsvf_command) close(xsvf_fd); - command_print(CMD_CTX, "XSVF file programmed successfully"); + command_print(CMD, "XSVF file programmed successfully"); return ERROR_OK; } -- 2.30.2