From 5fd1cb0e5b4ec60d34109febac25443a9394b8f1 Mon Sep 17 00:00:00 2001 From: Edward Fewell Date: Wed, 5 Dec 2018 17:54:42 -0600 Subject: [PATCH] icepick.cfg: add cancel reset bit to TAP register writes The Agama family of devices (CC26x2/CC13x2) required an additional bit to be set when adding the core's TAP into the scan chain. The cancel reset bit 0x10000 tells the ICEPick to take the bus out of reset so that the other bits will take effect. This bit is a NOP on other devices and ICEPicks, so the change shouldn't adversely affect other devices. Change-Id: I9245eef0936ea7eea28ae84ab5e8ce05fa63af40 Signed-off-by: Edward Fewell Reviewed-on: http://openocd.zylin.com/4789 Tested-by: jenkins Reviewed-by: Spencer Oliver --- tcl/target/icepick.cfg | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/tcl/target/icepick.cfg b/tcl/target/icepick.cfg index 0f160bb107..a945bea8a1 100644 --- a/tcl/target/icepick.cfg +++ b/tcl/target/icepick.cfg @@ -90,18 +90,18 @@ proc icepick_c_tapenable {jrc port} { # And never to enter RESET, which will disable the TAPs. # first enable power and clock for TAP - icepick_c_router $jrc 1 0x2 $port 0x100048 + icepick_c_router $jrc 1 0x2 $port 0x110048 # TRM states that the register should be read back here, skipped for now # enable debug "default" mode - icepick_c_router $jrc 1 0x2 $port 0x102048 + icepick_c_router $jrc 1 0x2 $port 0x112048 # TRM states that debug enable and debug mode should be read back and # confirmed - skipped for now # Finally select the tap - icepick_c_router $jrc 1 0x2 $port 0x102148 + icepick_c_router $jrc 1 0x2 $port 0x112148 # Enter the bypass state irscan $jrc [CONST IR_BYPASS] -endstate RUN/IDLE -- 2.30.2