From 5da746fa09dc1fbc28b4b4431035f5058a7e76a2 Mon Sep 17 00:00:00 2001 From: Tomas Vanek Date: Sun, 13 Jan 2019 09:31:03 +0100 Subject: [PATCH 1/1] flash/nor/nrf5: detect newer devices without HWID table nrf5 flash driver detected devices by looking up the HWID in the table of known devices. Unfortunately chips are produced with many different HWIDs for each type. All nRF52 devices have FICR INFO field suitable for device identification without need of HWID lookup. Some newer nRF51 devices have FICR INFO too although undocumented. Use this information to identify the device. nrf5_info() is reworked to show just concise info. Decoding FICR and UICR registers was moved from nrf5_info() to a new command 'nrf5 info' without functional changes. The flash bank for UICR page has the same size as program flash sector. Change-Id: I900095b9ae23ee995f8e2bef8539b75d00300da5 Signed-off-by: Tomas Vanek Reviewed-on: http://openocd.zylin.com/4848 Tested-by: jenkins --- doc/openocd.texi | 4 + src/flash/nor/nrf5.c | 255 +++++++++++++++++++++++++++++++++++-------- 2 files changed, 215 insertions(+), 44 deletions(-) diff --git a/doc/openocd.texi b/doc/openocd.texi index 440f434541..af1684d00d 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -6363,6 +6363,10 @@ works only for chips that do not have factory pre-programmed region 0 code. @end deffn +@deffn Command {nrf5 info} +Decodes and shows informations from FICR and UICR registers. +@end deffn + @end deffn @deffn {Flash Driver} ocl diff --git a/src/flash/nor/nrf5.c b/src/flash/nor/nrf5.c index 4addb61d42..426f287332 100644 --- a/src/flash/nor/nrf5.c +++ b/src/flash/nor/nrf5.c @@ -71,14 +71,19 @@ enum nrf5_ficr_registers { NRF5_FICR_BLE_1MBIT2 = NRF5_FICR_REG(0x0F4), NRF5_FICR_BLE_1MBIT3 = NRF5_FICR_REG(0x0F8), NRF5_FICR_BLE_1MBIT4 = NRF5_FICR_REG(0x0FC), + + /* Following registers are available on nRF52 and on nRF51 since rev 3 */ + NRF5_FICR_INFO_PART = NRF5_FICR_REG(0x100), + NRF5_FICR_INFO_VARIANT = NRF5_FICR_REG(0x104), + NRF5_FICR_INFO_PACKAGE = NRF5_FICR_REG(0x108), + NRF5_FICR_INFO_RAM = NRF5_FICR_REG(0x10C), + NRF5_FICR_INFO_FLASH = NRF5_FICR_REG(0x110), }; enum nrf5_uicr_registers { NRF5_UICR_BASE = 0x10001000, /* User Information * Configuration Regsters */ - NRF5_UICR_SIZE = 0x100, - #define NRF5_UICR_REG(offset) (NRF5_UICR_BASE + offset) NRF5_UICR_CLENR0 = NRF5_UICR_REG(0x000), @@ -107,8 +112,23 @@ enum nrf5_nvmc_config_bits { }; +struct nrf52_ficr_info { + uint32_t part; + uint32_t variant; + uint32_t package; + uint32_t ram; + uint32_t flash; +}; + +struct nrf5_device_spec { + uint16_t hwid; + const char *part; + const char *variant; + const char *build_code; + unsigned int flash_size_kb; +}; + struct nrf5_info { - uint32_t code_page_size; uint32_t refcount; struct nrf5_bank { @@ -116,13 +136,12 @@ struct nrf5_info { bool probed; } bank[2]; struct target *target; -}; -struct nrf5_device_spec { - uint16_t hwid; - const char *part; - const char *variant; - const char *build_code; + /* chip identification stored in nrf5_probe() for use in nrf5_info() */ + bool ficr_info_valid; + struct nrf52_ficr_info ficr_info; + const struct nrf5_device_spec *spec; + uint32_t hwid; unsigned int flash_size_kb; }; @@ -207,6 +226,9 @@ static const struct nrf5_device_spec nrf5_known_devices_table[] = { NRF5_DEVICE_DEF(0x007A, "51422", "CEAA", "C0", 256), NRF5_DEVICE_DEF(0x0088, "51422", "CFAC", "A0", 256), + /* The driver fully autodects nRF52 series devices by FICR INFO, + * no need for nRF52xxx HWIDs in this table */ +#if 0 /* nRF52810 Devices */ NRF5_DEVICE_DEF(0x0142, "52810", "QFAA", "B0", 192), NRF5_DEVICE_DEF(0x0143, "52810", "QCAA", "C0", 192), @@ -218,6 +240,21 @@ static const struct nrf5_device_spec nrf5_known_devices_table[] = { /* nRF52840 Devices */ NRF5_DEVICE_DEF(0x0150, "52840", "QIAA", "C0", 1024), +#endif +}; + +struct nrf5_device_package { + uint32_t package; + const char *code; +}; + +/* Newer devices have FICR INFO.PACKAGE. + * This table converts its value to two character code */ +static const struct nrf5_device_package nrf5_packages_table[] = { + { 0x2000, "QF" }, + { 0x2001, "CH" }, + { 0x2002, "CI" }, + { 0x2005, "CK" }, }; static int nrf5_bank_is_probed(struct flash_bank *bank) @@ -463,62 +500,177 @@ static int nrf5_protect(struct flash_bank *bank, int set, int first, int last) return ERROR_OK; } +static bool nrf5_info_variant_to_str(uint32_t variant, char *bf) +{ + h_u32_to_be((uint8_t *)bf, variant); + bf[4] = '\0'; + if (isalnum(bf[0]) && isalnum(bf[1]) && isalnum(bf[2]) && isalnum(bf[3])) + return true; + + strcpy(bf, "xxxx"); + return false; +} + +static const char *nrf5_decode_info_package(uint32_t package) +{ + for (size_t i = 0; i < ARRAY_SIZE(nrf5_packages_table); i++) { + if (nrf5_packages_table[i].package == package) + return nrf5_packages_table[i].code; + } + return "xx"; +} + +static int nrf5_info(struct flash_bank *bank, char *buf, int buf_size) +{ + struct nrf5_bank *nbank = bank->driver_priv; + struct nrf5_info *chip = nbank->chip; + + if (chip->spec) { + snprintf(buf, buf_size, + "nRF%s-%s(build code: %s) %ukB Flash", + chip->spec->part, chip->spec->variant, chip->spec->build_code, + chip->flash_size_kb); + + } else if (chip->ficr_info_valid) { + char variant[5]; + nrf5_info_variant_to_str(chip->ficr_info.variant, variant); + snprintf(buf, buf_size, + "nRF%" PRIx32 "-%s%.2s(build code: %s) %" PRIu32 + "kB Flash, %" PRIu32 "kB RAM", + chip->ficr_info.part, + nrf5_decode_info_package(chip->ficr_info.package), + variant, &variant[2], + chip->flash_size_kb, + chip->ficr_info.ram); + + } else { + snprintf(buf, buf_size, "nRF51xxx (HWID 0x%04" PRIx16 ") %ukB Flash", + chip->hwid, chip->flash_size_kb); + } + return ERROR_OK; +} + +static int nrf5_read_ficr_info(struct nrf5_info *chip) +{ + int res; + struct target *target = chip->target; + + chip->ficr_info_valid = false; + + res = target_read_u32(target, NRF5_FICR_INFO_PART, &chip->ficr_info.part); + if (res != ERROR_OK) { + LOG_DEBUG("Couldn't read FICR INFO.PART register"); + return res; + } + + uint32_t series = chip->ficr_info.part & 0xfffff000; + if (!(series == 0x51000 || series == 0x52000)) { + LOG_DEBUG("FICR INFO likely not implemented. Invalid PART value 0x%08" + PRIx32, chip->ficr_info.part); + return ERROR_TARGET_RESOURCE_NOT_AVAILABLE; + } + + /* Now we know the device has FICR INFO filled by something relevant: + * Although it is not documented, the tested nRF51 rev 3 devices + * have FICR INFO.PART, RAM and FLASH of the same format as nRF52. + * VARIANT and PACKAGE coding is unknown for a nRF51 device. + * nRF52 devices have FICR INFO documented and always filled. */ + + res = target_read_u32(target, NRF5_FICR_INFO_VARIANT, &chip->ficr_info.variant); + if (res != ERROR_OK) + return res; + + res = target_read_u32(target, NRF5_FICR_INFO_PACKAGE, &chip->ficr_info.package); + if (res != ERROR_OK) + return res; + + res = target_read_u32(target, NRF5_FICR_INFO_RAM, &chip->ficr_info.ram); + if (res != ERROR_OK) + return res; + + res = target_read_u32(target, NRF5_FICR_INFO_FLASH, &chip->ficr_info.flash); + if (res != ERROR_OK) + return res; + + chip->ficr_info_valid = true; + return ERROR_OK; +} + static int nrf5_probe(struct flash_bank *bank) { - uint32_t hwid; int res; struct nrf5_bank *nbank = bank->driver_priv; struct nrf5_info *chip = nbank->chip; + struct target *target = chip->target; - res = target_read_u32(chip->target, NRF5_FICR_CONFIGID, &hwid); + res = target_read_u32(target, NRF5_FICR_CONFIGID, &chip->hwid); if (res != ERROR_OK) { LOG_ERROR("Couldn't read CONFIGID register"); return res; } - hwid &= 0xFFFF; /* HWID is stored in the lower two + chip->hwid &= 0xFFFF; /* HWID is stored in the lower two * bytes of the CONFIGID register */ - const struct nrf5_device_spec *spec = NULL; + chip->spec = NULL; for (size_t i = 0; i < ARRAY_SIZE(nrf5_known_devices_table); i++) { - if (hwid == nrf5_known_devices_table[i].hwid) { - spec = &nrf5_known_devices_table[i]; + if (chip->hwid == nrf5_known_devices_table[i].hwid) { + chip->spec = &nrf5_known_devices_table[i]; break; } } - if (!chip->bank[0].probed && !chip->bank[1].probed) { - if (spec) - LOG_INFO("nRF%s-%s(build code: %s) %ukB Flash", - spec->part, spec->variant, spec->build_code, - spec->flash_size_kb); - else - LOG_WARNING("Unknown device (HWID 0x%08" PRIx32 ")", hwid); + /* Don't bail out on error for the case that some old engineering + * sample has FICR INFO registers unreadable. We can proceed anyway. */ + (void)nrf5_read_ficr_info(chip); + + if (chip->spec && chip->ficr_info_valid) { + /* check if HWID table gives the same part as FICR INFO */ + if (chip->ficr_info.part != strtoul(chip->spec->part, NULL, 16)) + LOG_WARNING("HWID 0x%04" PRIx32 " mismatch: FICR INFO.PART %" + PRIx32, chip->hwid, chip->ficr_info.part); } - if (bank->base == NRF5_FLASH_BASE) { - /* The value stored in NRF5_FICR_CODEPAGESIZE is the number of bytes in one page of FLASH. */ - res = target_read_u32(chip->target, NRF5_FICR_CODEPAGESIZE, - &chip->code_page_size); - if (res != ERROR_OK) { - LOG_ERROR("Couldn't read code page size"); - return res; - } + /* The value stored in NRF5_FICR_CODEPAGESIZE is the number of bytes in one page of FLASH. */ + uint32_t flash_page_size; + res = target_read_u32(chip->target, NRF5_FICR_CODEPAGESIZE, + &flash_page_size); + if (res != ERROR_OK) { + LOG_ERROR("Couldn't read code page size"); + return res; + } - /* Note the register name is misleading, - * NRF5_FICR_CODESIZE is the number of pages in flash memory, not the number of bytes! */ - uint32_t num_sectors; - res = target_read_u32(chip->target, NRF5_FICR_CODESIZE, &num_sectors); - if (res != ERROR_OK) { - LOG_ERROR("Couldn't read code memory size"); - return res; + /* Note the register name is misleading, + * NRF5_FICR_CODESIZE is the number of pages in flash memory, not the number of bytes! */ + uint32_t num_sectors; + res = target_read_u32(chip->target, NRF5_FICR_CODESIZE, &num_sectors); + if (res != ERROR_OK) { + LOG_ERROR("Couldn't read code memory size"); + return res; + } + + chip->flash_size_kb = num_sectors * flash_page_size / 1024; + + if (!chip->bank[0].probed && !chip->bank[1].probed) { + char buf[80]; + nrf5_info(bank, buf, sizeof(buf)); + if (!chip->spec && !chip->ficr_info_valid) { + LOG_INFO("Unknown device: %s", buf); + } else { + LOG_INFO("%s", buf); } + } + + if (bank->base == NRF5_FLASH_BASE) { bank->num_sectors = num_sectors; - bank->size = num_sectors * chip->code_page_size; + bank->size = num_sectors * flash_page_size; - if (spec && bank->size / 1024 != spec->flash_size_kb) + /* Sanity check */ + if (chip->spec && chip->flash_size_kb != chip->spec->flash_size_kb) LOG_WARNING("Chip's reported Flash capacity does not match expected one"); + if (chip->ficr_info_valid && chip->flash_size_kb != chip->ficr_info.flash) + LOG_WARNING("Chip's reported Flash capacity does not match FICR INFO.FLASH"); bank->sectors = calloc(bank->num_sectors, sizeof((bank->sectors)[0])); @@ -528,8 +680,8 @@ static int nrf5_probe(struct flash_bank *bank) /* Fill out the sector information: all NRF5 sectors are the same size and * there is always a fixed number of them. */ for (int i = 0; i < bank->num_sectors; i++) { - bank->sectors[i].size = chip->code_page_size; - bank->sectors[i].offset = i * chip->code_page_size; + bank->sectors[i].size = flash_page_size; + bank->sectors[i].offset = i * flash_page_size; /* mark as unknown */ bank->sectors[i].is_erased = -1; @@ -540,7 +692,7 @@ static int nrf5_probe(struct flash_bank *bank) chip->bank[0].probed = true; } else { - bank->size = NRF5_UICR_SIZE; + bank->size = flash_page_size; bank->num_sectors = 1; bank->sectors = calloc(bank->num_sectors, sizeof((bank->sectors)[0])); @@ -887,9 +1039,17 @@ COMMAND_HANDLER(nrf5_handle_mass_erase_command) return ERROR_OK; } -static int nrf5_info(struct flash_bank *bank, char *buf, int buf_size) +COMMAND_HANDLER(nrf5_handle_info_command) { int res; + struct flash_bank *bank = NULL; + struct target *target = get_current_target(CMD_CTX); + + res = get_flash_bank_by_addr(target, NRF5_FLASH_BASE, true, &bank); + if (res != ERROR_OK) + return res; + + assert(bank != NULL); struct nrf5_info *chip; @@ -960,7 +1120,7 @@ static int nrf5_info(struct flash_bank *bank, char *buf, int buf_size) } } - snprintf(buf, buf_size, + command_print(CMD, "\n[factory information control block]\n\n" "code page size: %"PRIu32"B\n" "code memory size: %"PRIu32"kB\n" @@ -1019,6 +1179,13 @@ static const struct command_registration nrf5_exec_command_handlers[] = { .help = "Erase all flash contents of the chip.", .usage = "", }, + { + .name = "info", + .handler = nrf5_handle_info_command, + .mode = COMMAND_EXEC, + .help = "Show FICR and UICR info.", + .usage = "", + }, COMMAND_REGISTRATION_DONE }; -- 2.30.2