From 56de276d91ea47cfbcaef7abd72be898609f9207 Mon Sep 17 00:00:00 2001 From: Marc Schink Date: Wed, 5 Jun 2019 13:34:29 +0200 Subject: [PATCH] tcl/target: Add initial Microchip SAML1x support There is not flash bank support at the moment. Change-Id: I833c009d9d21cdeb70b57d67eb557d50ed0fb4de Signed-off-by: Marc Schink Reviewed-on: http://openocd.zylin.com/5205 Tested-by: jenkins Reviewed-by: Tomas Vanek Reviewed-by: Matthias Welwarsky --- tcl/target/atsaml1x.cfg | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) create mode 100644 tcl/target/atsaml1x.cfg diff --git a/tcl/target/atsaml1x.cfg b/tcl/target/atsaml1x.cfg new file mode 100644 index 0000000000..3486746f77 --- /dev/null +++ b/tcl/target/atsaml1x.cfg @@ -0,0 +1,31 @@ +# +# Microchip (formerly Atmel) SAM L1x target +# +# Note: These devices support SWD only. +# + +transport select swd + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME saml1x +} + +if { [info exists WORKAREASIZE] } { + set _WORKAREASIZE $WORKAREASIZE +} else { + set _WORKAREASIZE 0x800 +} + +swd newdap $_CHIPNAME cpu -expected-id 0x0bf11477 +dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu + +set _TARGETNAME $_CHIPNAME.cpu +target create $_TARGETNAME cortex_m -dap $_CHIPNAME.dap + +$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0 + +if {![using_hla]} { + cortex_m reset_config sysresetreq +} -- 2.30.2