From 307ee6db473b3e92597ee69863f5428a37a8a941 Mon Sep 17 00:00:00 2001 From: Antonio Borneo Date: Mon, 27 Apr 2020 16:52:31 +0200 Subject: [PATCH] doc: fix texinfo warning on @deffn not at the line beginning Commit 87a4158acf56 ("drivers: xds110: Clean up command syntax and documentation") does not follow the documentation structure that lists the adapters in cpt 2 "Debug Adapter Hardware" then lists the adapter commands in cpt 8.2 "Interface Drivers"; it puts all in cpt 2. While doing that, uses an incorrect texinfo syntax that causes the following warnings at compile time: doc/openocd.texi:543: warning: @deffn should only appear at the beginning of a line doc/openocd.texi:547: warning: @deffn should only appear at the beginning of a line doc/openocd.texi:552: warning: @deffn should only appear at the beginning of a line Move the documentation of xds110 commands in the proper chapter and fix the texinfo syntax. Change-Id: I0b3f0fe0c687f194bb02e2d81aca86fcd4fdd718 Signed-off-by: Antonio Borneo Fixes: 87a4158acf56 ("drivers: xds110: Clean up command syntax and documentation") Reviewed-on: http://openocd.zylin.com/5613 Tested-by: jenkins Reviewed-by: Andreas Fritiofson Reviewed-by: Edward Fewell --- doc/openocd.texi | 41 +++++++++++++++++++++++------------------ 1 file changed, 23 insertions(+), 18 deletions(-) diff --git a/doc/openocd.texi b/doc/openocd.texi index 2dbe770ad2..f3f963ecdf 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -536,24 +536,6 @@ debuggers to ARM Cortex based targets @url{http://www.keil.com/support/man/docs/ @* Link: @url{http://www.keil.com/ulink1/} @item @b{TI XDS110 Debug Probe} -@* The XDS110 is included as the embedded debug probe on many Texas Instruments -LaunchPad evaluation boards. The XDS110 is also available as a stand-alone USB -debug probe with the added capability to supply power to the target board. The -following commands are supported by the XDS110 driver: -@*@deffn {Config Command} {xds110 serial} serial_string -Specifies the serial number of which XDS110 probe to use. Otherwise, the first -XDS110 found will be used. -@end deffn -@*@deffn {Config Command} {xds110 supply} voltage_in_millivolts -Available only on the XDS110 stand-alone probe. Sets the voltage level of the -XDS110 power supply. A value of 0 leaves the supply off. Otherwise, the supply -can be set to any value in the range 1800 to 3600 millivolts. -@end deffn -@*@deffn {Command} {xds110 info} -Displays information about the connected XDS110 debug probe (e.g. firmware -version). -@end deffn -@* Further information can be found at the following sites: @* Link: @url{https://software-dl.ti.com/ccs/esd/documents/xdsdebugprobes/emu_xds110.html} @* Link: @url{https://software-dl.ti.com/ccs/esd/documents/xdsdebugprobes/emu_xds_software_package_download.html#xds110-support-utilities} @end itemize @@ -3141,6 +3123,29 @@ opendous-jtag is a freely programmable USB adapter. This is the Keil ULINK v1 JTAG debugger. @end deffn +@deffn {Interface Driver} {xds110} +The XDS110 is included as the embedded debug probe on many Texas Instruments +LaunchPad evaluation boards. The XDS110 is also available as a stand-alone USB +debug probe with the added capability to supply power to the target board. The +following commands are supported by the XDS110 driver: + +@deffn {Config Command} {xds110 serial} serial_string +Specifies the serial number of which XDS110 probe to use. Otherwise, the first +XDS110 found will be used. +@end deffn + +@deffn {Config Command} {xds110 supply} voltage_in_millivolts +Available only on the XDS110 stand-alone probe. Sets the voltage level of the +XDS110 power supply. A value of 0 leaves the supply off. Otherwise, the supply +can be set to any value in the range 1800 to 3600 millivolts. +@end deffn + +@deffn {Command} {xds110 info} +Displays information about the connected XDS110 debug probe (e.g. firmware +version). +@end deffn +@end deffn + @deffn {Interface Driver} {xlnx_pcie_xvc} This driver supports the Xilinx Virtual Cable (XVC) over PCI Express. It is commonly found in Xilinx based PCI Express designs. It allows debugging -- 2.30.2