From 2fdc1db30481279e39cdb1928a7455f75e34eb3f Mon Sep 17 00:00:00 2001 From: David Brownell Date: Sat, 17 Jul 2010 02:59:23 -0400 Subject: [PATCH] lm3s811-ek uses generic stellaris target config There's no point in an lm3s811-specific target file, so remove it in favor of the generic "stellaris.cfg". Signed-off-by: David Brownell --- NEWS | 1 + tcl/board/ek-lm3s811.cfg | 7 ++++--- tcl/target/lm3s811.cfg | 29 ----------------------------- 3 files changed, 5 insertions(+), 32 deletions(-) delete mode 100644 tcl/target/lm3s811.cfg diff --git a/NEWS b/NEWS index 2dd14cc60e..bb746fa1ca 100644 --- a/NEWS +++ b/NEWS @@ -49,6 +49,7 @@ Board, Target, and Interface Configuration Scripts: Support Voipac PXA270/PXA270M module. New $PARPORTADDR tcl variable used to change default parallel port address used. + Remove lm3s811.cfg; use "stellaris.cfg" instead Core Jim/TCL Scripting: New "add_script_search_dir" command, behaviour is the same diff --git a/tcl/board/ek-lm3s811.cfg b/tcl/board/ek-lm3s811.cfg index 7d3f2ce345..66519f674f 100644 --- a/tcl/board/ek-lm3s811.cfg +++ b/tcl/board/ek-lm3s811.cfg @@ -4,13 +4,14 @@ # http://www.luminarymicro.com/products/stellaris_811_evaluation_kits.html # include the FT2232 interface config for on-board JTAG interface +# NOTE: older '811-EK boards (before rev C) shouldn't use this. source [find interface/luminary.cfg] + set CHIPNAME lm3s811 + # include the target config -source [find target/lm3s811.cfg] +source [find target/stellaris.cfg] -# jtag speed -adapter_khz 500 adapter_nsrst_delay 100 diff --git a/tcl/target/lm3s811.cfg b/tcl/target/lm3s811.cfg deleted file mode 100644 index 49879d09f0..0000000000 --- a/tcl/target/lm3s811.cfg +++ /dev/null @@ -1,29 +0,0 @@ -# Script for TI/Luminary Stellaris LM3S811 - -if { [info exists CHIPNAME] } { - set _CHIPNAME $CHIPNAME -} else { - set _CHIPNAME lm3s811 -} - -if { [info exists CPUTAPID ] } { - set _CPUTAPID $CPUTAPID -} else { - set _CPUTAPID 0x3ba00477 -} - -#jtag scan chain -jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 1 -irmask 0xf -expected-id $_CPUTAPID - -# the luminary variant causes a software reset rather than asserting SRST -# this stops the debug registers from being cleared -# this will be fixed in later revisions of silicon -set _TARGETNAME $_CHIPNAME.cpu -target create $_TARGETNAME cortex_m3 -chain-position $_CHIPNAME.cpu -variant lm3s - -# 8k working area at base of ram, not backed up -$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size 0x2000 - -#flash configuration -set _FLASHNAME $_CHIPNAME.flash -flash bank $_FLASHNAME stellaris 0 0 0 0 $_TARGETNAME -- 2.30.2