From 23bf724e048df62181e744245af42d3694989749 Mon Sep 17 00:00:00 2001 From: Michael Schwingen Date: Sun, 19 Dec 2010 16:17:46 +0100 Subject: [PATCH] update IXP42x target / XBA board config --- tcl/board/actux3.cfg | 47 +++++++++++++++++++++ tcl/target/ixp42x.cfg | 91 ++++++++++++++++++++++++++++++++++++---- tcl/target/xba_revA3.cfg | 88 -------------------------------------- 3 files changed, 130 insertions(+), 96 deletions(-) create mode 100644 tcl/board/actux3.cfg delete mode 100644 tcl/target/xba_revA3.cfg diff --git a/tcl/board/actux3.cfg b/tcl/board/actux3.cfg new file mode 100644 index 0000000000..922d4fcf2b --- /dev/null +++ b/tcl/board/actux3.cfg @@ -0,0 +1,47 @@ +# board config file for AcTux3/XBA IXP42x board +# Date: 2010-12-16 +# Author: Michael Schwingen + +reset_config trst_and_srst separate + +adapter_nsrst_delay 100 +jtag_ntrst_delay 100 + +source [find target/ixp42x.cfg] + +$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size 0x10000 -work-area-backup 0 + +$_TARGETNAME configure -event reset-init { init_actux3 } + +proc init_actux3 { } { + ########################################################################## + # setup expansion bus CS + ########################################################################## + mww 0xc4000000 0xbd113842 ;#CS0 : Flash, write enabled @0x50000000 + mww 0xc4000004 0x94d10013 ;#CS1 + mww 0xc4000008 0x95960003 ;#CS2 + mww 0xc400000c 0x00000000 ;#CS3 + mww 0xc4000010 0x80900003 ;#CS4 + mww 0xc4000014 0x9d520003 ;#CS5 + mww 0xc4000018 0x81860001 ;#CS6 + mww 0xc400001c 0x80900003 ;#CS7 + + ixp42x_init_sdram $::IXP42x_SDRAM_16MB_4Mx16_1BANK 2100 3 + + #mww 0xc4000020 0xffffee ;# CFG0: remove expansion bus boot flash mirror at 0x00000000 + + ixp42x_set_bigendian + + flash probe 0 +} + +proc flash_boot { {FILE "/tftpboot/actux3/u-boot.bin"} } { + echo "writing bootloader: $FILE" + flash write_image erase $FILE 0x50000000 bin +} + +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME cfi 0x50000000 0x400000 2 2 $_TARGETNAME + +init +reset init diff --git a/tcl/target/ixp42x.cfg b/tcl/target/ixp42x.cfg index 6d2ecb7040..6e5857a57e 100644 --- a/tcl/target/ixp42x.cfg +++ b/tcl/target/ixp42x.cfg @@ -1,6 +1,5 @@ #xscale ixp42x CPU - if { [info exists CHIPNAME] } { set _CHIPNAME $CHIPNAME } else { @@ -17,16 +16,92 @@ if { [info exists ENDIAN] } { if { [info exists CPUTAPID ] } { set _CPUTAPID $CPUTAPID } else { - # force an error till we get a good number - set _CPUTAPID 0xffffffff + set _CPUTAPID 0x19274013 } +set _CPUTAPID2 0x19275013 +set _CPUTAPID3 0x19277013 +set _CPUTAPID4 0x29274013 +set _CPUTAPID5 0x29275013 +set _CPUTAPID6 0x29277013 -#use combined on interfaces or targets that can?t set TRST/SRST separately -reset_config srst_only srst_pulls_trst -#jtag scan chain - -jtag newtap $_CHIPNAME cpu -irlen 7 -ircapture 0x1 -irmask 0x7f -expected-id $_CPUTAPID +jtag newtap $_CHIPNAME cpu -irlen 7 -ircapture 0x1 -irmask 0x7f -expected-id $_CPUTAPID -expected-id $_CPUTAPID2 -expected-id $_CPUTAPID3 -expected-id $_CPUTAPID4 -expected-id $_CPUTAPID5 -expected-id $_CPUTAPID6 set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME xscale -endian $_ENDIAN -chain-position $_TARGETNAME -variant ixp42x + +# register constants for IXP42x SDRAM controller +global IXP425_SDRAM_IR_MODE_SET_CAS2_CMD +global IXP425_SDRAM_IR_MODE_SET_CAS3_CMD +set IXP425_SDRAM_IR_MODE_SET_CAS2_CMD 0x0000 +set IXP425_SDRAM_IR_MODE_SET_CAS3_CMD 0x0001 + +global IXP42x_SDRAM_CL3 +global IXP42x_SDRAM_CL2 +set IXP42x_SDRAM_CL3 0x0008 +set IXP42x_SDRAM_CL2 0x0000 + +global IXP42x_SDRAM_8MB_2Mx32_1BANK +global IXP42x_SDRAM_16MB_2Mx32_2BANK +global IXP42x_SDRAM_16MB_4Mx16_1BANK +global IXP42x_SDRAM_32MB_4Mx16_2BANK +global IXP42x_SDRAM_32MB_8Mx16_1BANK +global IXP42x_SDRAM_64MB_8Mx16_2BANK +global IXP42x_SDRAM_64MB_16Mx16_1BANK +global IXP42x_SDRAM_128MB_16Mx16_2BANK +global IXP42x_SDRAM_128MB_32Mx16_1BANK +global IXP42x_SDRAM_256MB_32Mx16_2BANK + +set IXP42x_SDRAM_8MB_2Mx32_1BANK 0x0030 +set IXP42x_SDRAM_16MB_2Mx32_2BANK 0x0031 +set IXP42x_SDRAM_16MB_4Mx16_1BANK 0x0032 +set IXP42x_SDRAM_32MB_4Mx16_2BANK 0x0033 +set IXP42x_SDRAM_32MB_8Mx16_1BANK 0x0010 +set IXP42x_SDRAM_64MB_8Mx16_2BANK 0x0011 +set IXP42x_SDRAM_64MB_16Mx16_1BANK 0x0012 +set IXP42x_SDRAM_128MB_16Mx16_2BANK 0x0013 +set IXP42x_SDRAM_128MB_32Mx16_1BANK 0x0014 +set IXP42x_SDRAM_256MB_32Mx16_2BANK 0x0015 + + +# helper function to init SDRAM on IXP42x. +# SDRAM_CFG: one of IXP42X_SDRAM_xxx +# REFRESH: refresh counter reload value (integer) +# CASLAT: 2 or 3 +proc ixp42x_init_sdram { SDRAM_CFG REFRESH CASLAT } { + + switch $CASLAT { + 2 { + set SDRAM_CFG [expr $SDRAM_CFG | $::IXP42x_SDRAM_CL2 ] + set CASCMD $::IXP425_SDRAM_IR_MODE_SET_CAS2_CMD + } + 3 { + set SDRAM_CFG [expr $SDRAM_CFG | $::IXP42x_SDRAM_CL3 ] + set CASCMD $::IXP425_SDRAM_IR_MODE_SET_CAS3_CMD + } + default { error [format "unsupported cas latency \"%s\" " $CASLAT] } + } + echo [format "\tIXP42x SDRAM Config: 0x%x, Refresh %d " $SDRAM_CFG $REFRESH] + + mww 0xCC000000 $SDRAM_CFG ;# SDRAM_CFG: 0x2A: 64MBit, CL3 + mww 0xCC000004 0 ;# disable refresh + mww 0xCC000008 3 ;# NOP + sleep 100 + mww 0xCC000004 $REFRESH ;# set refresh counter + mww 0xCC000008 2 ;# Precharge All Banks + sleep 100 + mww 0xCC000008 4 ;# Auto Refresh + mww 0xCC000008 4 ;# Auto Refresh + mww 0xCC000008 4 ;# Auto Refresh + mww 0xCC000008 4 ;# Auto Refresh + mww 0xCC000008 4 ;# Auto Refresh + mww 0xCC000008 4 ;# Auto Refresh + mww 0xCC000008 4 ;# Auto Refresh + mww 0xCC000008 4 ;# Auto Refresh + mww 0xCC000008 $CASCMD ;# Mode Select CL2/CL3 +} + +proc ixp42x_set_bigendian { } { + reg XSCALE_CTRL 0xF8 +} + diff --git a/tcl/target/xba_revA3.cfg b/tcl/target/xba_revA3.cfg deleted file mode 100644 index 71e7353d31..0000000000 --- a/tcl/target/xba_revA3.cfg +++ /dev/null @@ -1,88 +0,0 @@ -#Written by: Michael Schwingen - -if { [info exists CHIPNAME] } { - set _CHIPNAME $CHIPNAME -} else { - set _CHIPNAME xba_reva3 -} - -if { [info exists ENDIAN] } { - set _ENDIAN $ENDIAN -} else { - # default to big endian - set _ENDIAN big -} - -if { [info exists CPUTAPID ] } { - set _CPUTAPID $CPUTAPID -} else { - # force an error till we get a good number - set _CPUTAPID 0xffffffff -} - -reset_config trst_and_srst separate - -adapter_nsrst_delay 100 -jtag_ntrst_delay 100 - -#jtag scan chain -jtag newtap $_CHIPNAME cpu -irlen 7 -ircapture 0x1 -irmask 0x7f -expected-id $_CPUTAPID - -set _TARGETNAME $_CHIPNAME.cpu -target create $_TARGETNAME xscale -endian $_ENDIAN -chain-position $_TARGETNAME -variant ixp42x - -$_TARGETNAME configure -event reset-init { - ############################################################################# - # setup expansion bus CS, disable external wdt - ############################################################################# - mww 0xc4000000 0xbd113842 ;#CS0 : Flash, write enabled @0x50000000 - mww 0xc4000004 0x94d10013 ;#CS1 - mww 0xc4000008 0x95960003 ;#CS2 - mww 0xc400000c 0x00000000 ;#CS3 - mww 0xc4000010 0x80900003 ;#CS4 - mww 0xc4000014 0x9d520003 ;#CS5 - mww 0xc4000018 0x81860001 ;#CS6 - mww 0xc400001c 0x80900003 ;#CS7 - - ############################################################################# - # init SDRAM controller: 16MB, one bank, CL3 - ############################################################################# - mww 0xCC000000 0x2A ;# SDRAM_CFG: 64MBit, CL3 - mww 0xCC000004 0 ;# disable refresh - mww 0xCC000008 3 ;# NOP - sleep 100 - mww 0xCC000004 2100 ;# set refresh counter - mww 0xCC000008 2 ;# Precharge All Banks - sleep 100 - mww 0xCC000008 4 ;# Auto Refresh - mww 0xCC000008 4 ;# Auto Refresh - mww 0xCC000008 4 ;# Auto Refresh - mww 0xCC000008 4 ;# Auto Refresh - mww 0xCC000008 4 ;# Auto Refresh - mww 0xCC000008 4 ;# Auto Refresh - mww 0xCC000008 4 ;# Auto Refresh - mww 0xCC000008 4 ;# Auto Refresh - mww 0xCC000008 1 ;# Mode Select CL3 - - #mww 0xc4000020 0xffffee ;# CFG0: remove expansion bus boot flash - #mirror at 0x00000000 - - #big endian - reg XSCALE_CTRL 0xF8 - - # - # detect flash - # - flash probe 0 -} - -$_TARGETNAME configure -work-area-phys 0x20010000 -work-area-size 0x8060 -work-area-backup 0 - - -set _FLASHNAME $_CHIPNAME.flash -flash bank $_FLASHNAME cfi 0x50000000 0x400000 2 2 $_TARGETNAME - -init -reset init -# set big endian mode -reg XSCALE_CTRL 0xF8 -- 2.30.2