From 0ace4d24dbdaca219741338c8c9ecb61df8dc965 Mon Sep 17 00:00:00 2001 From: duane Date: Wed, 24 Jun 2009 02:01:14 +0000 Subject: [PATCH] Add support for ATMEL AT91SAM3U - CortexM3 Family git-svn-id: svn://svn.berlios.de/openocd/trunk@2383 b42882b7-edfa-0310-969c-e2dbd0fdcd60 --- doc/openocd.texi | 68 +- src/flash/Makefile.am | 2 + src/flash/at91sam3.c | 2494 ++++++++++++++++++++++++++++++++++ src/flash/at91sam3.h | 23 + src/flash/flash.c | 2 + tcl/board/atmel_sam3u_ek.cfg | 1 + tcl/target/at91sam3u1c.cfg | 7 + tcl/target/at91sam3u1e.cfg | 7 + tcl/target/at91sam3u2c.cfg | 7 + tcl/target/at91sam3u2e.cfg | 7 + tcl/target/at91sam3u4c.cfg | 9 + tcl/target/at91sam3u4e.cfg | 9 + tcl/target/at91sam3uXX.cfg | 47 + 13 files changed, 2677 insertions(+), 6 deletions(-) create mode 100755 src/flash/at91sam3.c create mode 100755 src/flash/at91sam3.h create mode 100755 tcl/board/atmel_sam3u_ek.cfg create mode 100755 tcl/target/at91sam3u1c.cfg create mode 100755 tcl/target/at91sam3u1e.cfg create mode 100755 tcl/target/at91sam3u2c.cfg create mode 100755 tcl/target/at91sam3u2e.cfg create mode 100755 tcl/target/at91sam3u4c.cfg create mode 100755 tcl/target/at91sam3u4e.cfg create mode 100755 tcl/target/at91sam3uXX.cfg diff --git a/doc/openocd.texi b/doc/openocd.texi index 7a6b948dcb..c586592942 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -130,7 +130,7 @@ debugged via the GDB protocol. @b{Flash Programing:} Flash writing is supported for external CFI compatible NOR flashes (Intel and AMD/Spansion command set) and several -internal flashes (LPC2000, AT91SAM7, STR7x, STR9x, LM3, and +internal flashes (LPC2000, AT91SAM7, AT91SAM3U, STR7x, STR9x, LM3, and STM32x). Preliminary support for various NAND flash controllers (LPC3180, Orion, S3C24xx, more) controller is included. @@ -3374,11 +3374,68 @@ flash bank aduc702x 0 0 0 0 $_TARGETNAME @end example @end deffn +@deffn {Flash Driver} at91sam3 +@cindex at91sam3 +All members of the AT91SAM3 (cortex-M3) microcontroller family from +atmel include internal flash and use the Cortex-M3 core. The driver +currently (6/22/09) recognizes the AT91SAM3U[1/2/4][C/E] chips. Note +that the driver was orginaly developed and tested using the +AT91SAM3U4E, using a SAM3U-EK eval board. Support for other chips in +the family where cribbed from the data sheet [Note to future +readers/updaters: Please remove this worrysome comment after other +chips are confirmed]. + +The AT91SAM3U4[E/C] (256K) chips have 2 flash banks, the other chips +(3U[1/2][E/C]) have 1 flash bank, in all cases the flash banks are at +the following fixed locations. + +@example +# Flash bank 0 - all chips +flash bank at91sam3 0x000080000 0 1 1 $_TARGETNAME +# Flash bank 1 - only 256K chips +flash bank at91sam3 0x000100000 0 1 1 $_TARGETNAME +@end example + +Internally, the AT91SAM3 flash memory is organized as follows: + +@itemize +@item @var{N-Banks:} 256K chips have 2 banks, others have 1 bank. +@item @var{Bank Size:} 128K/64K Per flash bank +@item @var{Sectors:} 16 or 8 per bank +@item @var{SectorSize:} 8K Per Sector +@item @var{PageSize:} 256 bytes per page. Note that OpenOCD operates on 'sector' sizes, not page sizes. +@end itemize + +The AT91SAM3 driver adds an additional command: + +@deffn Command {at91sam3 gpnvm set|clear|show all|NUMBER} +This command allows you to set, clear, or show the state of the GPNVM bits. +@end deffn + +@deffn Command {at91sam3 info} +This command attempts to display information about the AT91SAM3 +chip. @b{First} it read the @var{CHIPID_CIDR} [address 0x400e0740, see +Section 28.2.1, page 505 of the AT91SAM3U 29/may/2009 datasheet, +document id: doc6430A] and decodes the values. @b{Second} it reads the +various clock configuration registers and attempts to display how it +believes the chip is configured. By default, the SLOWCLK is assumed to +be 32768 Hz, see the command @b{at91sam3 slowclk}. +@end deffn + +@deffn Command {at91sam3 slowclk [VALUE]} +This command shows/sets the slow clock frequency used in the +@b{at91sam3 info} command calculations above. +@end deffn + +@end deffn + @deffn {Flash Driver} at91sam7 -All members of the AT91SAM7 microcontroller family from Atmel -include internal flash and use ARM7TDMI cores. -The driver automatically recognizes a number of these chips using -the chip identification register, and autoconfigures itself. +All members of the AT91SAM7 microcontroller family from Atmel include +internal flash and use ARM7TDMI cores. The driver automatically +recognizes a number of these chips using the chip identification +register, and autoconfigures itself. +@end deffn + @example flash bank at91sam7 0 0 0 0 $_TARGETNAME @@ -3419,7 +3476,6 @@ This assumes that the first flash bank (number 0) is associated with the appropriate at91sam7 target. @end quotation @end deffn -@end deffn @deffn {Flash Driver} avr The AVR 8-bit microcontrollers from Atmel integrate flash memory. diff --git a/src/flash/Makefile.am b/src/flash/Makefile.am index 73f02bffc1..60a322aa6a 100644 --- a/src/flash/Makefile.am +++ b/src/flash/Makefile.am @@ -11,6 +11,7 @@ libflash_la_SOURCES = \ cfi.c \ non_cfi.c \ at91sam7.c \ + at91sam3.c \ davinci_nand.c \ str7x.c \ str9x.c \ @@ -42,6 +43,7 @@ noinst_HEADERS = \ cfi.h \ non_cfi.h \ at91sam7.h \ + at91sam3.h \ str7x.h \ str9x.h \ nand.h \ diff --git a/src/flash/at91sam3.c b/src/flash/at91sam3.c new file mode 100755 index 0000000000..0fedf6f1f8 --- /dev/null +++ b/src/flash/at91sam3.c @@ -0,0 +1,2494 @@ +/*************************************************************************** + * Copyright (C) 2009 by Duane Ellis * + * openocd@duaneellis.com * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS for A PARTICULAR PURPOSE. See the * + * GNU General public License for more details. * + * * + * You should have received a copy of the GNU General public License * + * along with this program; if not, write to the * + * Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * +****************************************************************************/ + +/* Some of the the lower level code was based on code supplied by + * ATMEL under this copyright. */ + +/* BEGIN ATMEL COPYRIGHT */ +/* ---------------------------------------------------------------------------- + * ATMEL Microcontroller Software Support + * ---------------------------------------------------------------------------- + * Copyright (c) 2009, Atmel Corporation + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * - Redistributions of source code must retain the above copyright notice, + * this list of conditions and the disclaimer below. + * + * Atmel's name may not be used to endorse or promote products derived from + * this software without specific prior written permission. + * + * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, + * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * ---------------------------------------------------------------------------- + */ +/* END ATMEL COPYRIGHT */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + + +#include +#include +#include +#include "log.h" +#include "types.h" +#include "flash.h" +#include "target.h" +#include "membuf.h" +#include "at91sam3.h" +#include "time_support.h" + +#define REG_NAME_WIDTH (12) + + +#define FLASH_BANK0_BASE 0x00080000 +#define FLASH_BANK1_BASE 0x00100000 + +#define AT91C_EFC_FCMD_GETD (0x0) // (EFC) Get Flash Descriptor +#define AT91C_EFC_FCMD_WP (0x1) // (EFC) Write Page +#define AT91C_EFC_FCMD_WPL (0x2) // (EFC) Write Page and Lock +#define AT91C_EFC_FCMD_EWP (0x3) // (EFC) Erase Page and Write Page +#define AT91C_EFC_FCMD_EWPL (0x4) // (EFC) Erase Page and Write Page then Lock +#define AT91C_EFC_FCMD_EA (0x5) // (EFC) Erase All +// cmd6 is not present int he at91sam3u4/2/1 data sheet table 17-2 +// #define AT91C_EFC_FCMD_EPL (0x6) // (EFC) Erase plane? +// cmd7 is not present int he at91sam3u4/2/1 data sheet table 17-2 +// #define AT91C_EFC_FCMD_EPA (0x7) // (EFC) Erase pages? +#define AT91C_EFC_FCMD_SLB (0x8) // (EFC) Set Lock Bit +#define AT91C_EFC_FCMD_CLB (0x9) // (EFC) Clear Lock Bit +#define AT91C_EFC_FCMD_GLB (0xA) // (EFC) Get Lock Bit +#define AT91C_EFC_FCMD_SFB (0xB) // (EFC) Set Fuse Bit +#define AT91C_EFC_FCMD_CFB (0xC) // (EFC) Clear Fuse Bit +#define AT91C_EFC_FCMD_GFB (0xD) // (EFC) Get Fuse Bit +#define AT91C_EFC_FCMD_STUI (0xE) // (EFC) Start Read Unique ID +#define AT91C_EFC_FCMD_SPUI (0xF) // (EFC) Stop Read Unique ID + +#define offset_EFC_FMR 0 +#define offset_EFC_FCR 4 +#define offset_EFC_FSR 8 +#define offset_EFC_FRR 12 + + +static float +_tomhz( uint32_t freq_hz ) +{ + float f; + + f = ((float)(freq_hz)) / 1000000.0; + return f; +} + +// How the chip is configured. +struct sam3_cfg { + uint32_t unique_id[4]; + + uint32_t slow_freq; + uint32_t rc_freq; + uint32_t mainosc_freq; + uint32_t plla_freq; + uint32_t mclk_freq; + uint32_t cpu_freq; + uint32_t fclk_freq; + uint32_t pclk0_freq; + uint32_t pclk1_freq; + uint32_t pclk2_freq; + + +#define SAM3_CHIPID_CIDR (0x400E0740) + uint32_t CHIPID_CIDR; +#define SAM3_CHIPID_EXID (0x400E0744) + uint32_t CHIPID_EXID; + +#define SAM3_SUPC_CR (0x400E1210) + uint32_t SUPC_CR; + +#define SAM3_PMC_BASE (0x400E0400) +#define SAM3_PMC_SCSR (SAM3_PMC_BASE + 0x0008) + uint32_t PMC_SCSR; +#define SAM3_PMC_PCSR (SAM3_PMC_BASE + 0x0018) + uint32_t PMC_PCSR; +#define SAM3_CKGR_UCKR (SAM3_PMC_BASE + 0x001c) + uint32_t CKGR_UCKR; +#define SAM3_CKGR_MOR (SAM3_PMC_BASE + 0x0020) + uint32_t CKGR_MOR; +#define SAM3_CKGR_MCFR (SAM3_PMC_BASE + 0x0024) + uint32_t CKGR_MCFR; +#define SAM3_CKGR_PLLAR (SAM3_PMC_BASE + 0x0028) + uint32_t CKGR_PLLAR; +#define SAM3_PMC_MCKR (SAM3_PMC_BASE + 0x0030) + uint32_t PMC_MCKR; +#define SAM3_PMC_PCK0 (SAM3_PMC_BASE + 0x0040) + uint32_t PMC_PCK0; +#define SAM3_PMC_PCK1 (SAM3_PMC_BASE + 0x0044) + uint32_t PMC_PCK1; +#define SAM3_PMC_PCK2 (SAM3_PMC_BASE + 0x0048) + uint32_t PMC_PCK2; +#define SAM3_PMC_SR (SAM3_PMC_BASE + 0x0068) + uint32_t PMC_SR; +#define SAM3_PMC_IMR (SAM3_PMC_BASE + 0x006c) + uint32_t PMC_IMR; +#define SAM3_PMC_FSMR (SAM3_PMC_BASE + 0x0070) + uint32_t PMC_FSMR; +#define SAM3_PMC_FSPR (SAM3_PMC_BASE + 0x0074) + uint32_t PMC_FSPR; +}; + + +struct sam3_bank_private { + int probed; + // DANGER: THERE ARE DRAGONS HERE.. + // NOTE: If you add more 'ghost' pointers + // be aware that you must *manually* update + // these pointers in the function sam3_GetDetails() + // See the comment "Here there be dragons" + + // so we can find the chip we belong to + struct sam3_chip *pChip; + // so we can find the orginal bank pointer + flash_bank_t *pBank; + unsigned bank_number; + uint32_t controller_address; + uint32_t base_address; + bool present; + unsigned size_bytes; + unsigned nsectors; + unsigned sector_size; + unsigned page_size; +}; + +struct sam3_chip_details { + // THERE ARE DRAGONS HERE.. + // note: If you add pointers here + // becareful about them as they + // may need to be updated inside + // the function: "sam3_GetDetails() + // which copy/overwrites the + // 'runtime' copy of this structure + uint32_t chipid_cidr; + const char *name; + + unsigned n_gpnvms; +#define SAM3_N_NVM_BITS 3 + unsigned gpnvm[SAM3_N_NVM_BITS]; + unsigned total_flash_size; + unsigned total_sram_size; + unsigned n_banks; +#define SAM3_MAX_FLASH_BANKS 2 + // these are "initialized" from the global const data + struct sam3_bank_private bank[SAM3_MAX_FLASH_BANKS]; +}; + + +struct sam3_chip { + struct sam3_chip *next; + int probed; + + // this is "initialized" from the global const structure + struct sam3_chip_details details; + target_t *target; + struct sam3_cfg cfg; + + struct membuf *mbuf; +}; + + +struct sam3_reg_list { + uint32_t address; size_t struct_offset; const char *name; + void (*explain_func)( struct sam3_chip *pInfo ); +}; + + +static struct sam3_chip *all_sam3_chips; + +static struct sam3_chip * +get_current_sam3(struct command_context_s *cmd_ctx ) +{ + target_t *t; + static struct sam3_chip *p; + + t = get_current_target( cmd_ctx ); + if( !t ){ + command_print( cmd_ctx, "No current target?"); + return NULL; + } + + p = all_sam3_chips; + if( !p ){ + // this should not happen + // the command is not registered until the chip is created? + command_print( cmd_ctx, "No SAM3 chips exist?"); + return NULL; + } + + while( p ){ + if( p->target == t ){ + return p; + } + p = p->next; + } + command_print( cmd_ctx, "Cannot find SAM3 chip?"); + return NULL; +} + + +// these are used to *initialize* the "pChip->details" structure. +static const struct sam3_chip_details all_sam3_details[] = { + { + .chipid_cidr = 0x28100960, + .name = "at91sam3u4e", + .total_flash_size = 256 * 1024, + .total_sram_size = 52 * 1024, + .n_gpnvms = 3, + .n_banks = 2, + + // System boots at address 0x0 + // gpnvm[1] = selects boot code + // if gpnvm[1] == 0 + // boot is via "SAMBA" (rom) + // else + // boot is via FLASH + // Selection is via gpnvm[2] + // endif + // + // NOTE: banks 0 & 1 switch places + // if gpnvm[2] == 0 + // Bank0 is the boot rom + // else + // Bank1 is the boot rom + // endif + .bank[0] = { + .probed = 0, + .pChip = NULL, + .pBank = NULL, + .bank_number = 0, + .base_address = FLASH_BANK0_BASE, + .controller_address = 0x400e0800, + .present = 1, + .size_bytes = 128 * 1024, + .nsectors = 16, + .sector_size = 8192, + .page_size = 256, + }, + + .bank[1] = { + .probed = 0, + .pChip = NULL, + .pBank = NULL, + .bank_number = 1, + .base_address = FLASH_BANK1_BASE, + .controller_address = 0x400e0a00, + .present = 1, + .size_bytes = 128 * 1024, + .nsectors = 16, + .sector_size = 8192, + .page_size = 256, + }, + }, + + { + .chipid_cidr = 0x281a0760, + .name = "at91sam3u2e", + .total_flash_size = 128 * 1024, + .total_sram_size = 36 * 1024, + .n_gpnvms = 2, + .n_banks = 1, + + // System boots at address 0x0 + // gpnvm[1] = selects boot code + // if gpnvm[1] == 0 + // boot is via "SAMBA" (rom) + // else + // boot is via FLASH + // Selection is via gpnvm[2] + // endif + .bank[0] = { + .probed = 0, + .pChip = NULL, + .pBank = NULL, + .bank_number = 0, + .base_address = FLASH_BANK0_BASE, + .controller_address = 0x400e0800, + .present = 1, + .size_bytes = 128 * 1024, + .nsectors = 16, + .sector_size = 8192, + .page_size = 256, + }, + + .bank[1] = { + .present = 0, + .probed = 0, + .bank_number = 1, + }, + }, + { + .chipid_cidr = 0x28190560, + .name = "at91sam3u1e", + .total_flash_size = 64 * 1024, + .total_sram_size = 20 * 1024, + .n_gpnvms = 2, + .n_banks = 1, + + // System boots at address 0x0 + // gpnvm[1] = selects boot code + // if gpnvm[1] == 0 + // boot is via "SAMBA" (rom) + // else + // boot is via FLASH + // Selection is via gpnvm[2] + // endif + // + + .bank[0] = { + .probed = 0, + .pChip = NULL, + .pBank = NULL, + .bank_number = 0, + .base_address = FLASH_BANK0_BASE, + .controller_address = 0x400e0800, + .present = 1, + .size_bytes = 64 * 1024, + .nsectors = 8, + .sector_size = 8192, + .page_size = 256, + }, + + .bank[1] = { + .present = 0, + .probed = 0, + .bank_number = 1, + }, + }, + + { + .chipid_cidr = 0x28000960, + .name = "at91sam3u4c", + .total_flash_size = 256 * 1024, + .total_sram_size = 52 * 1024, + .n_gpnvms = 3, + .n_banks = 2, + + // System boots at address 0x0 + // gpnvm[1] = selects boot code + // if gpnvm[1] == 0 + // boot is via "SAMBA" (rom) + // else + // boot is via FLASH + // Selection is via gpnvm[2] + // endif + // + // NOTE: banks 0 & 1 switch places + // if gpnvm[2] == 0 + // Bank0 is the boot rom + // else + // Bank1 is the boot rom + // endif + .bank[0] = { + .probed = 0, + .pChip = NULL, + .pBank = NULL, + .bank_number = 0, + .base_address = FLASH_BANK0_BASE, + .controller_address = 0x400e0800, + .present = 1, + .size_bytes = 128 * 1024, + .nsectors = 16, + .sector_size = 8192, + .page_size = 256, + }, + + .bank[1] = { + .probed = 0, + .pChip = NULL, + .pBank = NULL, + .bank_number = 1, + .base_address = FLASH_BANK1_BASE, + .controller_address = 0x400e0a00, + .present = 1, + .size_bytes = 128 * 1024, + .nsectors = 16, + .sector_size = 8192, + .page_size = 256, + }, + }, + + { + .chipid_cidr = 0x280a0760, + .name = "at91sam3u2c", + .total_flash_size = 128 * 1024, + .total_sram_size = 36 * 1024, + .n_gpnvms = 2, + .n_banks = 1, + + // System boots at address 0x0 + // gpnvm[1] = selects boot code + // if gpnvm[1] == 0 + // boot is via "SAMBA" (rom) + // else + // boot is via FLASH + // Selection is via gpnvm[2] + // endif + .bank[0] = { + .probed = 0, + .pChip = NULL, + .pBank = NULL, + .bank_number = 0, + .base_address = FLASH_BANK0_BASE, + .controller_address = 0x400e0800, + .present = 1, + .size_bytes = 128 * 1024, + .nsectors = 16, + .sector_size = 8192, + .page_size = 256, + }, + + .bank[1] = { + .present = 0, + .probed = 0, + .bank_number = 1, + }, + }, + { + .chipid_cidr = 0x28090560, + .name = "at91sam3u1c", + .total_flash_size = 64 * 1024, + .total_sram_size = 20 * 1024, + .n_gpnvms = 2, + .n_banks = 1, + + // System boots at address 0x0 + // gpnvm[1] = selects boot code + // if gpnvm[1] == 0 + // boot is via "SAMBA" (rom) + // else + // boot is via FLASH + // Selection is via gpnvm[2] + // endif + // + + .bank[0] = { + .probed = 0, + .pChip = NULL, + .pBank = NULL, + .bank_number = 0, + .base_address = FLASH_BANK0_BASE, + .controller_address = 0x400e0800, + .present = 1, + .size_bytes = 64 * 1024, + .nsectors = 8, + .sector_size = 8192, + .page_size = 256, + }, + + .bank[1] = { + .present = 0, + .probed = 0, + .bank_number = 1, + }, + }, + + // terminate + { + .chipid_cidr = 0, + .name = NULL, + } +}; + +/* Globals above */ +/*********************************************************************** + ********************************************************************** + ********************************************************************** + ********************************************************************** + ********************************************************************** + **********************************************************************/ +/* *ATMEL* style code - from the SAM3 driver code */ + +/** Get the current status of the EEFC + * + * the value of some status bits (LOCKE, PROGE). + * @param pPrivate - info about the bank + * @param v - result goes here + */ +static int +EFC_GetStatus( struct sam3_bank_private *pPrivate, uint32_t *v ) +{ + int r; + r = target_read_u32( pPrivate->pChip->target, pPrivate->controller_address + offset_EFC_FSR, v ); + LOG_DEBUG("Status: 0x%08x (lockerror: %d, cmderror: %d, ready: %d)", + (unsigned int)(*v), + ((unsigned int)((*v >> 2) & 1)), + ((unsigned int)((*v >> 1) & 1)), + ((unsigned int)((*v >> 0) & 1))); + + return r; +} + +/** Get the result of the last executed command. + * @param pPrivate - info about the bank + * @param v - result goes here + */ +static int +EFC_GetResult( struct sam3_bank_private *pPrivate, uint32_t *v ) +{ + int r; + uint32_t rv; + r = target_read_u32( pPrivate->pChip->target, pPrivate->controller_address + offset_EFC_FRR, &rv ); + if( v ){ + *v = rv; + } + LOG_DEBUG("Result: 0x%08x", ((unsigned int)(rv))); + return r; +} + +static int +EFC_StartCommand(struct sam3_bank_private *pPrivate, + unsigned command, unsigned argument ) +{ + uint32_t n,v; + int r; + int retry; + + retry = 0; + do_retry: + + // Check command & argument + switch (command) { + + case AT91C_EFC_FCMD_WP: + case AT91C_EFC_FCMD_WPL: + case AT91C_EFC_FCMD_EWP: + case AT91C_EFC_FCMD_EWPL: + // case AT91C_EFC_FCMD_EPL: + // case AT91C_EFC_FCMD_EPA: + case AT91C_EFC_FCMD_SLB: + case AT91C_EFC_FCMD_CLB: + n = (pPrivate->size_bytes / pPrivate->page_size); + if( argument >= n ){ + LOG_ERROR("*BUG*: Embedded flash has only %u pages", (unsigned)(n)); + } + break; + + case AT91C_EFC_FCMD_SFB: + case AT91C_EFC_FCMD_CFB: + if( argument >= pPrivate->pChip->details.n_gpnvms ){ + LOG_ERROR("*BUG*: Embedded flash has only %d GPNVMs", + pPrivate->pChip->details.n_gpnvms ); + } + break; + + case AT91C_EFC_FCMD_GETD: + case AT91C_EFC_FCMD_EA: + case AT91C_EFC_FCMD_GLB: + case AT91C_EFC_FCMD_GFB: + case AT91C_EFC_FCMD_STUI: + case AT91C_EFC_FCMD_SPUI: + if( argument != 0 ){ + LOG_ERROR("Argument is meaningless for cmd: %d", command ); + } + break; + default: + LOG_ERROR("Unknown command %d", command); + break; + } + + if( command == AT91C_EFC_FCMD_SPUI ){ + // this is a very special situation. + // Situation (1) - error/retry - see below + // And we are being called recursively + // Situation (2) - normal, finished reading unique id + } else { + // it should be "ready" + EFC_GetStatus( pPrivate, &v ); + if( v & 1 ){ + // then it is ready + // we go on + } else { + if( retry ){ + // we have done this before + // the controller is not responding. + LOG_ERROR("flash controller(%d) is not ready! Error", pPrivate->bank_number ); + return ERROR_FAIL; + } else { + retry++; + LOG_ERROR("Flash controller(%d) is not ready, attempting reset", + pPrivate->bank_number ); + // we do that by issuing the *STOP* command + EFC_StartCommand( pPrivate, AT91C_EFC_FCMD_SPUI, 0 ); + // above is recursive, and further recursion is blocked by + // if( command == AT91C_EFC_FCMD_SPUI ) above + goto do_retry; + } + } + } + + v = (0x5A << 24) | (argument << 8) | command; + LOG_DEBUG("Command: 0x%08x", ((unsigned int)(v)) ); + r = target_write_u32( pPrivate->pBank->target, + pPrivate->controller_address + offset_EFC_FCR, + v); + if( r != ERROR_OK ){ + LOG_DEBUG("Error Write failed"); + } + return r; +} + +/** Performs the given command and wait until its completion (or an error). + * + * @param pPrivate - info about the bank + * @param command - Command to perform. + * @param argument - Optional command argument. + * @param status - put command status bits here + */ +static int +EFC_PerformCommand( struct sam3_bank_private *pPrivate, + unsigned command, + unsigned argument, + uint32_t *status) +{ + + int r; + uint32_t v; + long long ms_now, ms_end; + + // default + if( status ){ + *status = 0; + } + + r = EFC_StartCommand( pPrivate, command, argument ); + if( r != ERROR_OK ){ + return r; + } + + ms_end = 500 + timeval_ms(); + + + do { + r = EFC_GetStatus( pPrivate, &v ); + if( r != ERROR_OK ){ + return r; + } + ms_now = timeval_ms(); + if( ms_now > ms_end ){ + // error + LOG_ERROR("Command timeout"); + return ERROR_FAIL; + } + } + while ( (v & 1) == 0 ) + ; + + // error bits.. + if( status ){ + *status = (v & 0x6); + } + return ERROR_OK; + +} + + + + + +/** Read the unique ID. + * + * \param pPrivate - info about the bank + * + * The unique ID is stored in the 'pPrivate' structure. + */ + +static int +FLASHD_ReadUniqueID ( struct sam3_bank_private *pPrivate ) +{ + int r; + uint32_t v; + int x; + // assume 0 + pPrivate->pChip->cfg.unique_id[0] = 0; + pPrivate->pChip->cfg.unique_id[1] = 0; + pPrivate->pChip->cfg.unique_id[2] = 0; + pPrivate->pChip->cfg.unique_id[3] = 0; + + LOG_DEBUG("Begin"); + r = EFC_StartCommand( pPrivate, AT91C_EFC_FCMD_STUI, 0); + if( r < 0 ){ + return r; + } + + for( x = 0 ; x < 4 ; x++ ){ + r = target_read_u32( pPrivate->pChip->target, + pPrivate->pBank->base + (x * 4), + &v ); + if( r < 0 ){ + return r; + } + pPrivate->pChip->cfg.unique_id[x] = v; + } + + r = EFC_PerformCommand( pPrivate, AT91C_EFC_FCMD_SPUI, 0, NULL ); + LOG_DEBUG("End: R=%d, id=0x%08x, 0x%08x, 0x%08x, 0x%08x", + r, + (unsigned int)(pPrivate->pChip->cfg.unique_id[0]), + (unsigned int)(pPrivate->pChip->cfg.unique_id[1]), + (unsigned int)(pPrivate->pChip->cfg.unique_id[2]), + (unsigned int)(pPrivate->pChip->cfg.unique_id[3])); + return r; + +} + +/** Erases the entire flash. + * @param pPrivate - the info about the bank. + */ +static int +FLASHD_EraseEntireBank( struct sam3_bank_private *pPrivate ) +{ + LOG_DEBUG("Here"); + return EFC_PerformCommand( pPrivate, AT91C_EFC_FCMD_EA, 0, NULL ); +} + + + +/** Gets current GPNVM state. + * @param pPrivate - info about the bank. + * @param gpnvm - GPNVM bit index. + * @param puthere - result stored here. + * + */ +//------------------------------------------------------------------------------ +static int +FLASHD_GetGPNVM( struct sam3_bank_private *pPrivate, unsigned gpnvm, unsigned *puthere) +{ + uint32_t v; + int r; + + LOG_DEBUG("Here"); + if( pPrivate->bank_number != 0 ){ + LOG_ERROR("GPNVM only works with Bank0"); + return ERROR_FAIL; + } + + if( gpnvm >= pPrivate->pChip->details.n_gpnvms ){ + LOG_ERROR("Invalid GPNVM %d, max: %d, ignored", + gpnvm,pPrivate->pChip->details.n_gpnvms ); + return ERROR_FAIL; + } + + // Get GPNVMs status + r = EFC_PerformCommand( pPrivate, AT91C_EFC_FCMD_GFB, 0, NULL ); + if( r != ERROR_OK ){ + LOG_ERROR("Failed"); + return r; + } + + r = EFC_GetResult(pPrivate, &v ); + + if( puthere ){ + // Check if GPNVM is set + // get the bit and make it a 0/1 + *puthere = (v >> gpnvm) & 1; + } + + return r; +} + + + + +/** Clears the selected GPNVM bit. + * @param gpnvm GPNVM index. + * + * Returns 0 if successful; otherwise returns an error code. + */ +static int +FLASHD_ClrGPNVM( struct sam3_bank_private *pPrivate, unsigned gpnvm) +{ + int r; + unsigned v; + + LOG_DEBUG("Here"); + if( pPrivate->bank_number != 0 ){ + LOG_ERROR("GPNVM only works with Bank0"); + return ERROR_FAIL; + } + + if( gpnvm >= pPrivate->pChip->details.n_gpnvms ){ + LOG_ERROR("Invalid GPNVM %d, max: %d, ignored", + gpnvm,pPrivate->pChip->details.n_gpnvms ); + return ERROR_FAIL; + } + + r = FLASHD_GetGPNVM( pPrivate, gpnvm, &v ); + if( r != ERROR_OK ){ + LOG_DEBUG("Failed: %d",r); + return r; + } + r = EFC_PerformCommand( pPrivate, AT91C_EFC_FCMD_CFB, gpnvm, NULL); + LOG_DEBUG("End: %d",r); + return r; +} + + + +/** Sets the selected GPNVM bit. + * @param gpnvm GPNVM index. + * + */ +static int +FLASHD_SetGPNVM( struct sam3_bank_private *pPrivate, unsigned gpnvm) +{ + int r; + unsigned v; + + if( pPrivate->bank_number != 0 ){ + LOG_ERROR("GPNVM only works with Bank0"); + return ERROR_FAIL; + } + + if( gpnvm >= pPrivate->pChip->details.n_gpnvms ){ + LOG_ERROR("Invalid GPNVM %d, max: %d, ignored", + gpnvm,pPrivate->pChip->details.n_gpnvms ); + return ERROR_FAIL; + } + + r = FLASHD_GetGPNVM( pPrivate, gpnvm, &v ); + if( r != ERROR_OK ){ + return r; + } + if( v ){ + // already set + r = ERROR_OK; + } else { + // set it + r = EFC_PerformCommand( pPrivate, AT91C_EFC_FCMD_SFB, gpnvm, NULL ); + } + return r; +} + + +/** Returns a bit field (at most 64) of locked regions within a page. + * @param pPrivate - info about the bank + * @param v - where to store locked bits + * \param end End address of range. + */ + +static int +FLASHD_GetLockBits(struct sam3_bank_private *pPrivate, uint32_t *v ) +{ + int r; + LOG_DEBUG("Here"); + r = EFC_PerformCommand( pPrivate, AT91C_EFC_FCMD_GLB, 0, NULL); + if( r == ERROR_OK ){ + r = EFC_GetResult(pPrivate, v ); + } + LOG_DEBUG("End: %d",r); + return r; +} + + +/**Unlocks all the regions in the given address range. + * + * \param start_sector - first sector to unlock + * \param end_sector - last (inclusive) to unlock + */ + +static int +FLASHD_Unlock( struct sam3_bank_private *pPrivate, + unsigned start_sector, + unsigned end_sector ) +{ + int r; + uint32_t status; + uint32_t pg; + uint32_t pages_per_sector; + + pages_per_sector = pPrivate->sector_size / pPrivate->page_size; + + /* Unlock all pages */ + while (start_sector <= end_sector){ + pg = start_sector * pages_per_sector; + + r = EFC_PerformCommand(pPrivate, AT91C_EFC_FCMD_CLB, pg, &status ); + if (r != ERROR_OK) { + return r; + } + start_sector++; + } + + return ERROR_OK; +} + + +/** Locks regions + * + * @param start_sector - first sector to lock + * @param end_sector - last sector (inclusive) to lock + */ + + +static int +FLASHD_Lock( struct sam3_bank_private *pPrivate, + unsigned start_sector, + unsigned end_sector ) +{ + uint32_t status; + uint32_t pg; + uint32_t pages_per_sector; + int r; + + pages_per_sector = pPrivate->sector_size / pPrivate->page_size; + + /* Lock all pages */ + while (start_sector <= end_sector){ + pg = start_sector * pages_per_sector; + + r = EFC_PerformCommand(pPrivate, AT91C_EFC_FCMD_SLB, pg, &status ); + if (r != ERROR_OK) { + return r; + } + start_sector++; + } + return ERROR_OK; +} + + +/****** END SAM3 CODE ********/ + +/* begin helpful debug code */ + +static void +sam3_sprintf( struct sam3_chip *pChip , const char *fmt, ... ) +{ + va_list ap; + va_start(ap,fmt); + if( pChip->mbuf == NULL ){ + return; + } + + membuf_vsprintf( pChip->mbuf, fmt, ap ); + va_end(ap); +} + +// print the fieldname, the field value, in dec & hex, and return field value +static uint32_t +sam3_reg_fieldname( struct sam3_chip *pChip, + const char *regname, + uint32_t value, + unsigned shift, + unsigned width) +{ + uint32_t v; + int hwidth, dwidth; + + + // extract the field + v = value >> shift; + v = v & ((1 << width)-1); + if( width <= 16 ){ + hwidth = 4; + dwidth = 5; + } else { + hwidth = 8; + dwidth = 12; + } + + // show the basics + sam3_sprintf( pChip, "\t%*s: %*d [0x%0*x] ", + REG_NAME_WIDTH, regname, + dwidth, v, + hwidth, v ); + return v; +} + + +static const char _unknown[] = "unknown"; +static const char * const eproc_names[] = { + _unknown, // 0 + "arm946es", // 1 + "arm7tdmi", // 2 + "cortex-m3", // 3 + "arm920t", // 4 + "arm926ejs", // 5 + _unknown, // 6 + _unknown, // 7 + _unknown, // 8 + _unknown, // 9 + _unknown, // 10 + _unknown, // 11 + _unknown, // 12 + _unknown, // 13 + _unknown, // 14 + _unknown, // 15 +}; + +#define nvpsize2 nvpsize // these two tables are identical +static const char * const nvpsize[] = { + "none", // 0 + "8K bytes", // 1 + "16K bytes", // 2 + "32K bytes", // 3 + _unknown, // 4 + "64K bytes", // 5 + _unknown, // 6 + "128K bytes", // 7 + _unknown, // 8 + "256K bytes", // 9 + "512K bytes", // 10 + _unknown, // 11 + "1024K bytes", // 12 + _unknown, // 13 + "2048K bytes", // 14 + _unknown, // 15 +}; + + +static const char * const sramsize[] = { + "48K Bytes", // 0 + "1K Bytes", // 1 + "2K Bytes", // 2 + "6K Bytes", // 3 + "112K Bytes", // 4 + "4K Bytes", // 5 + "80K Bytes", // 6 + "160K Bytes", // 7 + "8K Bytes", // 8 + "16K Bytes", // 9 + "32K Bytes", // 10 + "64K Bytes", // 11 + "128K Bytes", // 12 + "256K Bytes", // 13 + "96K Bytes", // 14 + "512K Bytes", // 15 + +}; + +static const struct archnames { unsigned value; const char *name; } archnames[] = { + { 0x19, "AT91SAM9xx Series" }, + { 0x29, "AT91SAM9XExx Series" }, + { 0x34, "AT91x34 Series" }, + { 0x37, "CAP7 Series" }, + { 0x39, "CAP9 Series" }, + { 0x3B, "CAP11 Series" }, + { 0x40, "AT91x40 Series" }, + { 0x42, "AT91x42 Series" }, + { 0x55, "AT91x55 Series" }, + { 0x60, "AT91SAM7Axx Series" }, + { 0x61, "AT91SAM7AQxx Series" }, + { 0x63, "AT91x63 Series" }, + { 0x70, "AT91SAM7Sxx Series" }, + { 0x71, "AT91SAM7XCxx Series" }, + { 0x72, "AT91SAM7SExx Series" }, + { 0x73, "AT91SAM7Lxx Series" }, + { 0x75, "AT91SAM7Xxx Series" }, + { 0x76, "AT91SAM7SLxx Series" }, + { 0x80, "ATSAM3UxC Series (100-pin version)" }, + { 0x81, "ATSAM3UxE Series (144-pin version)" }, + { 0x83, "ATSAM3AxC Series (100-pin version)" }, + { 0x84, "ATSAM3XxC Series (100-pin version)" }, + { 0x85, "ATSAM3XxE Series (144-pin version)" }, + { 0x86, "ATSAM3XxG Series (208/217-pin version)" }, + { 0x88, "ATSAM3SxA Series (48-pin version)" }, + { 0x89, "ATSAM3SxB Series (64-pin version)" }, + { 0x8A, "ATSAM3SxC Series (100-pin version)" }, + { 0x92, "AT91x92 Series" }, + { 0xF0, "AT75Cxx Series" }, + { -1, NULL }, + +}; + +static const char * const nvptype[] = { + "rom", // 0 + "romless or onchip flash", // 1 + "embedded flash memory", // 2 + "rom(nvpsiz) + embedded flash (nvpsiz2)", //3 + "sram emulating flash", // 4 + _unknown, // 5 + _unknown, // 6 + _unknown, // 7 + +}; + +static const char *_yes_or_no( uint32_t v ) +{ + if( v ){ + return "YES"; + } else { + return "NO"; + } +} + +static const char * const _rc_freq[] = { + "4 MHz", "8 MHz", "12 MHz", "reserved" +}; + +static void +sam3_explain_ckgr_mor( struct sam3_chip *pChip ) +{ + uint32_t v; + uint32_t rcen; + + v = sam3_reg_fieldname(pChip, "MOSCXTEN", pChip->cfg.CKGR_MOR, 0, 1 ); + sam3_sprintf( pChip, "(main xtal enabled: %s)\n", + _yes_or_no(v) ); + v = sam3_reg_fieldname(pChip, "MOSCXTBY", pChip->cfg.CKGR_MOR, 1, 1 ); + sam3_sprintf( pChip, "(main osc bypass: %s)\n", + _yes_or_no(v) ); + rcen = sam3_reg_fieldname(pChip, "MOSCRCEN", pChip->cfg.CKGR_MOR, 2, 1 ); + sam3_sprintf( pChip, "(onchip RC-OSC enabled: %s)\n", + _yes_or_no(rcen) ); + v = sam3_reg_fieldname(pChip, "MOSCRCF", pChip->cfg.CKGR_MOR, 4, 3 ); + sam3_sprintf( pChip, "(onchip RC-OSC freq: %s)\n", + _rc_freq[v] ); + + pChip->cfg.rc_freq = 0; + if( rcen ){ + switch( v ){ + default: + pChip->cfg.rc_freq = 0; + case 0: + pChip->cfg.rc_freq = 4 * 1000 * 1000; + break; + case 1: + pChip->cfg.rc_freq = 8 * 1000 * 1000; + break; + case 2: + pChip->cfg.rc_freq = 12* 1000 * 1000; + break; + } + } + + v = sam3_reg_fieldname(pChip,"MOSCXTST", pChip->cfg.CKGR_MOR, 8, 8 ); + sam3_sprintf( pChip, "(startup clks, time= %f uSecs)\n", + ((float)(v * 1000000)) / ((float)(pChip->cfg.slow_freq))); + v = sam3_reg_fieldname(pChip, "MOSCSEL", pChip->cfg.CKGR_MOR, 24, 1 ); + sam3_sprintf( pChip, "(mainosc source: %s)\n", + v ? "external xtal" : "internal RC"); + + v = sam3_reg_fieldname(pChip,"CFDEN", pChip->cfg.CKGR_MOR, 25, 1 ); + sam3_sprintf(pChip, "(clock failure enabled: %s)\n", + _yes_or_no(v)); +} + + + +static void +sam3_explain_chipid_cidr( struct sam3_chip *pChip ) +{ + int x; + uint32_t v; + const char *cp; + + sam3_reg_fieldname( pChip, "Version", pChip->cfg.CHIPID_CIDR, 0, 5 ); + sam3_sprintf(pChip,"\n"); + + v = sam3_reg_fieldname( pChip, "EPROC", pChip->cfg.CHIPID_CIDR, 5, 3 ); + sam3_sprintf( pChip, "%s\n", eproc_names[v]); + + v = sam3_reg_fieldname( pChip, "NVPSIZE", pChip->cfg.CHIPID_CIDR, 8, 4 ); + sam3_sprintf( pChip, "%s\n", nvpsize[v]); + + v = sam3_reg_fieldname( pChip, "NVPSIZE2", pChip->cfg.CHIPID_CIDR, 12, 4 ); + sam3_sprintf( pChip, "%s\n", nvpsize2[v]); + + v = sam3_reg_fieldname( pChip, "SRAMSIZE", pChip->cfg.CHIPID_CIDR, 16,4 ); + sam3_sprintf( pChip, "%s\n", sramsize[ v ] ); + + v = sam3_reg_fieldname( pChip, "ARCH", pChip->cfg.CHIPID_CIDR, 20, 8 ); + cp = _unknown; + for( x = 0 ; archnames[x].name ; x++ ){ + if( v == archnames[x].value ){ + cp = archnames[x].name; + break; + } + } + + sam3_sprintf( pChip, "%s\n", cp ); + + v = sam3_reg_fieldname( pChip, "NVPTYP", pChip->cfg.CHIPID_CIDR, 28, 3 ); + sam3_sprintf( pChip, "%s\n", nvptype[ v ] ); + + v = sam3_reg_fieldname( pChip, "EXTID", pChip->cfg.CHIPID_CIDR, 31, 1 ); + sam3_sprintf(pChip, "(exists: %s)\n", _yes_or_no(v)); +} + +static void +sam3_explain_ckgr_mcfr( struct sam3_chip *pChip ) +{ + uint32_t v; + + + v = sam3_reg_fieldname( pChip, "MAINFRDY", pChip->cfg.CKGR_MCFR, 16, 1 ); + sam3_sprintf( pChip, "(main ready: %s)\n", _yes_or_no( v )); + + v = sam3_reg_fieldname( pChip, "MAINF", pChip->cfg.CKGR_MCFR, 0, 16 ); + + v = (v * pChip->cfg.slow_freq) / 16; + pChip->cfg.mainosc_freq = v; + + sam3_sprintf(pChip, "(%3.03f Mhz (%d.%03dkhz slowclk)\n", + _tomhz( v ), + pChip->cfg.slow_freq / 1000, + pChip->cfg.slow_freq % 1000); + +} + +static void +sam3_explain_ckgr_plla( struct sam3_chip *pChip ) +{ + uint32_t mula,diva; + + diva = sam3_reg_fieldname( pChip, "DIVA", pChip->cfg.CKGR_PLLAR, 0, 8 ); + sam3_sprintf(pChip,"\n"); + mula = sam3_reg_fieldname( pChip, "MULA", pChip->cfg.CKGR_PLLAR, 16, 11 ); + sam3_sprintf(pChip,"\n"); + pChip->cfg.plla_freq = 0; + if( mula==0 ){ + sam3_sprintf(pChip,"\tPLLA Freq: (Disabled,mula=0)\n"); + } else if( diva == 0 ){ + sam3_sprintf(pChip,"\tPLLA Freq: (Disabled,diva=0)\n"); + } else if( diva == 1 ){ + pChip->cfg.plla_freq = (pChip->cfg.mainosc_freq * (mula+1)); + sam3_sprintf(pChip,"\tPLLA Freq: %3.03f MHz\n", + _tomhz( pChip->cfg.plla_freq )); + } +} + + +static void +sam3_explain_mckr( struct sam3_chip *pChip ) +{ + uint32_t css, pres,fin; + int pdiv; + const char *cp; + + css = sam3_reg_fieldname( pChip, "CSS", pChip->cfg.PMC_MCKR, 0, 2 ); + switch( css & 3 ){ + case 0: + fin = pChip->cfg.slow_freq; + cp = "slowclk"; + break; + case 1: + fin = pChip->cfg.mainosc_freq; + cp = "mainosc"; + break; + case 2: + fin = pChip->cfg.plla_freq; + cp = "plla"; + break; + case 3: + if( pChip->cfg.CKGR_UCKR & (1 << 16) ){ + fin = 480 * 1000 * 1000; + cp = "upll"; + } else { + fin = 0; + cp = "upll (*ERROR* UPLL is disabled)"; + } + break; + } + + sam3_sprintf( pChip, "%s (%3.03f Mhz)\n", + cp, + _tomhz( fin ) ); + pres = sam3_reg_fieldname(pChip, "PRES", pChip->cfg.PMC_MCKR, 4, 3 ); + switch( pres & 0x07 ){ + case 0: + pdiv = 1; + cp = "selected clock"; + case 1: + pdiv = 2; + cp = "clock/2"; + break; + case 2: + pdiv = 4; + cp = "clock/4"; + break; + case 3: + pdiv = 8; + cp = "clock/8"; + break; + case 4: + pdiv = 16; + cp = "clock/16"; + break; + case 5: + pdiv = 32; + cp = "clock/32"; + break; + case 6: + pdiv = 64; + cp = "clock/64"; + break; + case 7: + pdiv = 6; + cp = "clock/6"; + break; + } + sam3_sprintf( pChip, "(%s)\n", cp ); + fin = fin / pdiv; + // sam3 has a *SINGLE* clock - + // other at91 series parts have divisors for these. + pChip->cfg.cpu_freq = fin; + pChip->cfg.mclk_freq = fin; + pChip->cfg.fclk_freq = fin; + sam3_sprintf( pChip, "\t\tResult CPU Freq: %3.03f\n", + _tomhz( fin ) ); +} + +#if 0 +static struct sam3_chip * +target2sam3( target_t *pTarget ) +{ + struct sam3_chip *pChip; + + if(pTarget == NULL ){ + return NULL; + } + + pChip = all_sam3_chips; + while(pChip){ + if(pChip->target == pTarget ){ + break; // return below + } else { + pChip = pChip->next; + } + } + return pChip; +} +#endif + +static uint32_t * +sam3_get_reg_ptr( struct sam3_cfg *pCfg, const struct sam3_reg_list *pList ) +{ + // this function exists to help + // keep funky offsetof() errors + // and casting from causing bugs + + // By using prototypes - we can detect what would + // be casting errors. + + return ((uint32_t *)( ((char *)(pCfg)) + pList->struct_offset )); +} + + +#define SAM3_ENTRY( NAME, FUNC ) { .address = SAM3_ ## NAME, .struct_offset = offsetof( struct sam3_cfg, NAME ), #NAME, FUNC } +static const struct sam3_reg_list sam3_all_regs[] = { + SAM3_ENTRY( CKGR_MOR , sam3_explain_ckgr_mor ), + SAM3_ENTRY( CKGR_MCFR , sam3_explain_ckgr_mcfr ), + SAM3_ENTRY( CKGR_PLLAR , sam3_explain_ckgr_plla ), + SAM3_ENTRY( CKGR_UCKR , NULL ), + SAM3_ENTRY( PMC_FSMR , NULL ), + SAM3_ENTRY( PMC_FSPR , NULL ), + SAM3_ENTRY( PMC_IMR , NULL ), + SAM3_ENTRY( PMC_MCKR , sam3_explain_mckr ), + SAM3_ENTRY( PMC_PCK0 , NULL ), + SAM3_ENTRY( PMC_PCK1 , NULL ), + SAM3_ENTRY( PMC_PCK2 , NULL ), + SAM3_ENTRY( PMC_PCSR , NULL ), + SAM3_ENTRY( PMC_SCSR , NULL ), + SAM3_ENTRY( PMC_SR , NULL ), + SAM3_ENTRY( CHIPID_CIDR , sam3_explain_chipid_cidr ), + SAM3_ENTRY( CHIPID_EXID , NULL ), + SAM3_ENTRY( SUPC_CR, NULL ), + + // TERMINATE THE LIST + { .name = NULL } +}; +#undef SAM3_ENTRY + + + + +static struct sam3_bank_private * +get_sam3_bank_private( flash_bank_t *bank ) +{ + return (struct sam3_bank_private *)(bank->driver_priv); +} + +/* + * Given a pointer to where it goes in the structure.. + * Determine the register name, address from the all registers table. + */ +static const struct sam3_reg_list * +sam3_GetReg( struct sam3_chip *pChip, uint32_t *goes_here ) +{ + const struct sam3_reg_list *pReg; + + pReg = &(sam3_all_regs[0]); + while(pReg->name){ + uint32_t *pPossible; + + // calculate where this one go.. + // it is "possibly" this register. + + pPossible = ((uint32_t *)( ((char *)(&(pChip->cfg))) + pReg->struct_offset )); + + // well? Is it this register + if( pPossible == goes_here ){ + // Jump for joy! + return pReg; + } + + // next... + pReg++; + } + // This is *TOTAL*PANIC* - we are totally screwed. + LOG_ERROR("INVALID SAM3 REGISTER"); + return NULL; +} + + +static int +sam3_ReadThisReg( struct sam3_chip *pChip, uint32_t *goes_here ) +{ + const struct sam3_reg_list *pReg; + int r; + + pReg = sam3_GetReg( pChip, goes_here ); + if( !pReg ){ + return ERROR_FAIL; + } + + r = target_read_u32( pChip->target, pReg->address, goes_here ); + if( r != ERROR_OK ){ + LOG_ERROR("Cannot read SAM3 register: %s @ 0x%08x, Err: %d\n", + pReg->name, (unsigned)(pReg->address), r ); + } + return r; +} + + + +static int +sam3_ReadAllRegs( struct sam3_chip *pChip ) +{ + int r; + const struct sam3_reg_list *pReg; + + pReg = &(sam3_all_regs[0]); + while( pReg->name ){ + r = sam3_ReadThisReg( pChip, + sam3_get_reg_ptr( &(pChip->cfg), pReg ) ); + if( r != ERROR_OK ){ + LOG_ERROR("Cannot read SAM3 registere: %s @ 0x%08x, Error: %d\n", + pReg->name, ((unsigned)(pReg->address)), r ); + return r; + } + + pReg++; + } + + return ERROR_OK; +} + + +static int +sam3_GetInfo( struct sam3_chip *pChip ) +{ + const struct sam3_reg_list *pReg; + uint32_t regval; + + membuf_reset( pChip->mbuf ); + + + pReg = &(sam3_all_regs[0]); + while(pReg->name){ + // display all regs + LOG_DEBUG("Start: %s", pReg->name ); + regval = *sam3_get_reg_ptr( &(pChip->cfg), pReg ); + sam3_sprintf(pChip, "%*s: [0x%08x] -> 0x%08x\n", + REG_NAME_WIDTH, + pReg->name, + pReg->address, + regval ); + if( pReg->explain_func ){ + (*(pReg->explain_func))( pChip ); + } + LOG_DEBUG("End: %s", pReg->name ); + pReg++; + } + sam3_sprintf(pChip," rc-osc: %3.03f MHz\n", _tomhz( pChip->cfg.rc_freq )); + sam3_sprintf(pChip," mainosc: %3.03f MHz\n", _tomhz( pChip->cfg.mainosc_freq )); + sam3_sprintf(pChip," plla: %3.03f MHz\n", _tomhz( pChip->cfg.plla_freq )); + sam3_sprintf(pChip," cpu-freq: %3.03f MHz\n", _tomhz( pChip->cfg.cpu_freq )); + sam3_sprintf(pChip,"mclk-freq: %3.03f MHz\n", _tomhz( pChip->cfg.mclk_freq )); + + + sam3_sprintf( pChip, " UniqueId: 0x%08x 0x%08x 0x%08x 0x%08x\n", + pChip->cfg.unique_id[0], + pChip->cfg.unique_id[1], + pChip->cfg.unique_id[2], + pChip->cfg.unique_id[3]); + + + return ERROR_OK; +} + + +static int +sam3_erase_check(struct flash_bank_s *bank) +{ + int x; + + LOG_DEBUG("Here"); + if (bank->target->state != TARGET_HALTED) { + LOG_ERROR("Target not halted"); + return ERROR_TARGET_NOT_HALTED; + } + if( 0 == bank->num_sectors ){ + LOG_ERROR("Target: not supported/not probed\n"); + return ERROR_FAIL; + } + + LOG_INFO("sam3 - supports auto-erase, erase_check ignored"); + for( x = 0 ; x < bank->num_sectors ; x++ ){ + bank->sectors[x].is_erased = 1; + } + + LOG_DEBUG("Done"); + return ERROR_OK; +} + +static int +sam3_protect_check(struct flash_bank_s *bank) +{ + int r; + uint32_t v; + unsigned x; + struct sam3_bank_private *pPrivate; + + LOG_DEBUG("Begin"); + if (bank->target->state != TARGET_HALTED) { + LOG_ERROR("Target not halted"); + return ERROR_TARGET_NOT_HALTED; + } + + pPrivate = get_sam3_bank_private(bank); + if( !pPrivate ){ + LOG_ERROR("no private for this bank?"); + return ERROR_FAIL; + } + if( !(pPrivate->probed) ){ + return ERROR_FLASH_BANK_NOT_PROBED; + } + + r = FLASHD_GetLockBits( pPrivate , &v ); + if( r != ERROR_OK ){ + LOG_DEBUG("Failed: %d",r); + return r; + } + + for( x = 0 ; x < pPrivate->nsectors ; x++ ){ + bank->sectors[x].is_protected = (!!(v & (1 << x))); + } + LOG_DEBUG("Done"); + return ERROR_OK; +} + +static int +sam3_flash_bank_command(struct command_context_s *cmd_ctx, + char *cmd, + char **args, + int argc, + struct flash_bank_s *bank) +{ + struct sam3_chip *pChip; + + pChip = all_sam3_chips; + + // is this an existing chip? + while(pChip){ + if( pChip->target == bank->target ){ + break; + } + pChip = pChip->next; + } + + if( !pChip ){ + // this is a *NEW* chip + pChip = calloc( 1, sizeof(struct sam3_chip) ); + if( !pChip ){ + LOG_ERROR("NO RAM!"); + return ERROR_FAIL; + } + pChip->target = bank->target; + // insert at head + pChip->next = all_sam3_chips; + all_sam3_chips = pChip; + pChip->target = bank->target; + // assumption is this runs at 32khz + pChip->cfg.slow_freq = 32768; + pChip->probed = 0; + pChip->mbuf = membuf_new(); + if( !(pChip->mbuf) ){ + LOG_ERROR("no memory"); + return ERROR_FAIL; + } + } + + switch( bank->base ){ + default: + LOG_ERROR("Address 0x%08x invalid bank address (try 0x%08x or 0x%08x)", + ((unsigned int)(bank->base)), + ((unsigned int)(FLASH_BANK0_BASE)), + ((unsigned int)(FLASH_BANK1_BASE))); + return ERROR_FAIL; + break; + case FLASH_BANK0_BASE: + bank->driver_priv = &(pChip->details.bank[0]); + bank->bank_number = 0; + pChip->details.bank[0].pChip = pChip; + pChip->details.bank[0].pBank = bank; + break; + case FLASH_BANK1_BASE: + bank->driver_priv = &(pChip->details.bank[1]); + bank->bank_number = 1; + pChip->details.bank[1].pChip = pChip; + pChip->details.bank[1].pBank = bank; + break; + } + + // we initialize after probing. + return ERROR_OK; +} + +static int +sam3_GetDetails( struct sam3_bank_private *pPrivate ) +{ + const struct sam3_chip_details *pDetails; + struct sam3_chip *pChip; + void *vp; + flash_bank_t *saved_banks[SAM3_MAX_FLASH_BANKS]; + + unsigned x; + const char *cp; + + LOG_DEBUG("Begin"); + pDetails = all_sam3_details; + while( pDetails->name ){ + if( pDetails->chipid_cidr == pPrivate->pChip->cfg.CHIPID_CIDR ){ + break; + } else { + pDetails++; + } + } + if( pDetails->name == NULL ){ + LOG_ERROR("SAM3 ChipID 0x%08x not found in table (perhaps you can this chip?)", + (unsigned int)(pPrivate->pChip->cfg.CHIPID_CIDR) ); + // Help the victim, print details about the chip + membuf_reset( pPrivate->pChip->mbuf ); + membuf_sprintf( pPrivate->pChip->mbuf, + "SAM3 CHIPID_CIDR: 0x%08x decodes as follows\n", + pPrivate->pChip->cfg.CHIPID_CIDR ); + sam3_explain_chipid_cidr( pPrivate->pChip ); + cp = membuf_strtok( pPrivate->pChip->mbuf, "\n", &vp ); + while(cp){ + LOG_INFO("%s", cp ); + cp = membuf_strtok( NULL, "\n", &vp ); + } + return ERROR_FAIL; + } + + // DANGER: THERE ARE DRAGONS HERE + + // get our pChip - it is going + // to be over-written shortly + pChip = pPrivate->pChip; + + // Note that, in reality: + // + // pPrivate = &(pChip->details.bank[0]) + // or pPrivate = &(pChip->details.bank[1]) + // + + // save the "bank" pointers + for( x = 0 ; x < SAM3_MAX_FLASH_BANKS ; x++ ){ + saved_banks[ x ] = pChip->details.bank[x].pBank; + } + + // Overwrite the "details" structure. + memcpy( &(pPrivate->pChip->details), + pDetails, + sizeof(pPrivate->pChip->details)); + + // now fix the ghosted pointers + for( x = 0 ; x < SAM3_MAX_FLASH_BANKS ; x++ ){ + pChip->details.bank[x].pChip = pChip; + pChip->details.bank[x].pBank = saved_banks[x]; + } + + // update the *BANK*SIZE* + + LOG_DEBUG("End"); + return ERROR_OK; +} + + + +static int +_sam3_probe(struct flash_bank_s *bank, int noise) +{ + unsigned x; + int r; + struct sam3_bank_private *pPrivate; + + + LOG_DEBUG("Begin: Bank: %d, Noise: %d", bank->bank_number, noise ); + if (bank->target->state != TARGET_HALTED) + { + LOG_ERROR("Target not halted"); + return ERROR_TARGET_NOT_HALTED; + } + + pPrivate = get_sam3_bank_private( bank ); + if( !pPrivate ){ + LOG_ERROR("Invalid/unknown bank number\n"); + return ERROR_FAIL; + } + + r = sam3_ReadAllRegs(pPrivate->pChip); + if( r != ERROR_OK ){ + return r; + } + + + LOG_DEBUG("Here"); + r = sam3_GetInfo( pPrivate->pChip ); + if( r != ERROR_OK ){ + return r; + } + if( !(pPrivate->pChip->probed) ){ + pPrivate->pChip->probed = 1; + LOG_DEBUG("Here"); + r = sam3_GetDetails( pPrivate ); + if( r != ERROR_OK ){ + return r; + } + } + + // update the flash bank size + for( x = 0 ; x < SAM3_MAX_FLASH_BANKS ; x++ ){ + if( bank->base == pPrivate->pChip->details.bank[0].base_address ){ + bank->size = pPrivate->pChip->details.bank[0].size_bytes; + break; + } + } + + if( bank->sectors == NULL ){ + bank->sectors = calloc(pPrivate->nsectors, (sizeof( (bank->sectors)[0] ))); + if( bank->sectors == NULL ){ + LOG_ERROR("No memory!"); + return ERROR_FAIL; + } + bank->num_sectors = pPrivate->nsectors; + + for( x = 0 ; ((int)(x)) < bank->num_sectors ; x++ ){ + bank->sectors[x].size = pPrivate->sector_size; + bank->sectors[x].offset = x * (pPrivate->sector_size); + // mark as unknown + bank->sectors[x].is_erased = -1; + bank->sectors[x].is_protected = -1; + } + } + + pPrivate->probed = 1; + + r = sam3_protect_check( bank ); + if( r != ERROR_OK ){ + return r; + } + + LOG_DEBUG("Bank = %d, nbanks = %d", + pPrivate->bank_number , pPrivate->pChip->details.n_banks); + if( (pPrivate->bank_number+1) == pPrivate->pChip->details.n_banks ){ + // read unique id, + // it appears to be associated with the *last* flash bank. + FLASHD_ReadUniqueID(pPrivate); + } + + return r; +} + +static int +sam3_probe(struct flash_bank_s *bank) +{ + return _sam3_probe( bank, 1 ); +} + +static int +sam3_auto_probe(struct flash_bank_s *bank) +{ + return _sam3_probe( bank, 0 ); +} + + + +static int +sam3_erase(struct flash_bank_s *bank, int first, int last) +{ + struct sam3_bank_private *pPrivate; + int r; + + LOG_DEBUG("Here"); + if (bank->target->state != TARGET_HALTED) { + LOG_ERROR("Target not halted"); + return ERROR_TARGET_NOT_HALTED; + } + + r = sam3_auto_probe( bank ); + if( r != ERROR_OK ){ + LOG_DEBUG("Here,r=%d",r); + return r; + } + + pPrivate = get_sam3_bank_private( bank ); + if( !(pPrivate->probed) ){ + return ERROR_FLASH_BANK_NOT_PROBED; + } + + if( (first == 0) && ((last+1)== ((int)(pPrivate->nsectors))) ){ + // whole chip + LOG_DEBUG("Here"); + return FLASHD_EraseEntireBank( pPrivate ); + } + LOG_INFO("sam3 auto-erases while programing (request ignored)"); + return ERROR_OK; +} + +static int +sam3_protect(struct flash_bank_s *bank, int set, int first, int last) +{ + struct sam3_bank_private *pPrivate; + int r; + + LOG_DEBUG("Here"); + if (bank->target->state != TARGET_HALTED) { + LOG_ERROR("Target not halted"); + return ERROR_TARGET_NOT_HALTED; + } + + pPrivate = get_sam3_bank_private( bank ); + if( !(pPrivate->probed) ){ + return ERROR_FLASH_BANK_NOT_PROBED; + } + + if( set ){ + r = FLASHD_Lock( pPrivate, (unsigned)(first), (unsigned)(last)); + } else { + r = FLASHD_Unlock( pPrivate, (unsigned)(first), (unsigned)(last)); + } + LOG_DEBUG("End: r=%d",r); + + return r; + +} + + +static int +sam3_info( flash_bank_t *bank, char *buf, int buf_size ) +{ + if (bank->target->state != TARGET_HALTED) { + LOG_ERROR("Target not halted"); + return ERROR_TARGET_NOT_HALTED; + } + buf[ 0 ] = 0; + return ERROR_OK; +} + +static int +sam3_page_read( struct sam3_bank_private *pPrivate, unsigned pagenum, uint8_t *buf ) +{ + uint32_t adr; + int r; + + adr = pagenum * pPrivate->page_size; + adr += adr + pPrivate->base_address; + + r = target_read_memory( pPrivate->pChip->target, + adr, + 4, /* THIS*MUST*BE* in 32bit values */ + pPrivate->page_size / 4, + buf ); + if( r != ERROR_OK ){ + LOG_ERROR("SAM3: Flash program failed to read page phys address: 0x%08x", (unsigned int)(adr) ); + } + return r; +} + +// The code below is basically this: +// compiled with +// arm-none-eabi-gcc -mthumb -mcpu=cortex-m3 -O9 -S ./foobar.c -o foobar.s +// +// Only the *CPU* can write to the flash buffer. +// the DAP cannot... so - we download this 28byte thing +// Run the algorithm - (below) +// to program the device +// +// ======================================== +// #include +// +// struct foo { +// uint32_t *dst; +// const uint32_t *src; +// int n; +// volatile uint32_t *base; +// uint32_t cmd; +// }; +// +// +// uint32_t sam3_function( struct foo *p ) +// { +// volatile uint32_t *v; +// uint32_t *d; +// const uint32_t *s; +// int n; +// uint32_t r; +// +// d = p->dst; +// s = p->src; +// n = p->n; +// +// do { +// *d++ = *s++; +// } while( --n ) +// ; +// +// v = p->base; +// +// v[ 1 ] = p->cmd; +// do { +// r = v[8/4]; +// } while( !(r&1) ) +// ; +// return r; +// } +// ======================================== + + + +static const uint8_t +sam3_page_write_opcodes[] = { + // 24 0000 0446 mov r4, r0 + 0x04,0x46, + // 25 0002 6168 ldr r1, [r4, #4] + 0x61,0x68, + // 26 0004 0068 ldr r0, [r0, #0] + 0x00,0x68, + // 27 0006 A268 ldr r2, [r4, #8] + 0xa2,0x68, + // 28 @ lr needed for prologue + // 29 .L2: + // 30 0008 51F8043B ldr r3, [r1], #4 + 0x51,0xf8,0x04,0x3b, + // 31 000c 12F1FF32 adds r2, r2, #-1 + 0x12,0xf1,0xff,0x32, + // 32 0010 40F8043B str r3, [r0], #4 + 0x40,0xf8,0x04,0x3b, + // 33 0014 F8D1 bne .L2 + 0xf8,0xd1, + // 34 0016 E268 ldr r2, [r4, #12] + 0xe2,0x68, + // 35 0018 2369 ldr r3, [r4, #16] + 0x23,0x69, + // 36 001a 5360 str r3, [r2, #4] + 0x53,0x60, + // 37 001c 0832 adds r2, r2, #8 + 0x08,0x32, + // 38 .L4: + // 39 001e 1068 ldr r0, [r2, #0] + 0x10,0x68, + // 40 0020 10F0010F tst r0, #1 + 0x10,0xf0,0x01,0x0f, + // 41 0024 FBD0 beq .L4 + 0xfb,0xd0, + // 42 .done: + // 43 0026 FEE7 b .done + 0xfe,0xe7 +}; + + +static int +sam3_page_write( struct sam3_bank_private *pPrivate, unsigned pagenum, uint8_t *buf ) +{ + uint32_t adr; + uint32_t status; + int r; + + adr = pagenum * pPrivate->page_size; + adr += (adr + pPrivate->base_address); + + LOG_DEBUG("Wr Page %u @ phys address: 0x%08x", pagenum, (unsigned int)(adr) ); + r = target_write_memory( pPrivate->pChip->target, + adr, + 4, /* THIS*MUST*BE* in 32bit values */ + pPrivate->page_size / 4, + buf ); + if( r != ERROR_OK ){ + LOG_ERROR("SAM3: Failed to write (buffer) page at phys address 0x%08x", (unsigned int)(adr) ); + return r; + } + + r = EFC_PerformCommand( pPrivate, + // send Erase & Write Page + AT91C_EFC_FCMD_EWP, + pagenum, + &status ); + + if( r != ERROR_OK ){ + LOG_ERROR("SAM3: Error performing Erase & Write page @ phys address 0x%08x", (unsigned int)(adr) ); + } + if( status & (1 << 2) ){ + LOG_ERROR("SAM3: Page @ Phys address 0x%08x is locked", (unsigned int)(adr) ); + return ERROR_FAIL; + } + if( status & (1 << 1) ){ + LOG_ERROR("SAM3: Flash Command error @phys address 0x%08x", (unsigned int)(adr) ); + return ERROR_FAIL; + } + return ERROR_OK; +} + + + + + +static int +sam3_write(struct flash_bank_s *bank, + uint8_t *buffer, + uint32_t offset, + uint32_t count) +{ + int n; + unsigned page_cur; + unsigned page_end; + int r; + unsigned page_offset; + struct sam3_bank_private *pPrivate; + uint8_t *pagebuffer; + + // ignore dumb requests + if( count == 0 ){ + return ERROR_OK; + } + + if (bank->target->state != TARGET_HALTED) { + LOG_ERROR("Target not halted"); + return ERROR_TARGET_NOT_HALTED; + } + + pPrivate = get_sam3_bank_private(bank); + if( !(pPrivate->probed) ){ + return ERROR_FLASH_BANK_NOT_PROBED; + } + + + if( (offset + count) > pPrivate->size_bytes ){ + LOG_ERROR("Flash write error - past end of bank"); + LOG_ERROR(" offset: 0x%08x, count 0x%08x, BankEnd: 0x%08x", + (unsigned int)(offset), + (unsigned int)(count), + (unsigned int)(pPrivate->size_bytes) ); + return ERROR_FAIL; + } + + pagebuffer = alloca( pPrivate->page_size ); + + // what page do we start & end in? + page_cur = offset / pPrivate->page_size; + page_end = (offset + count - 1) / pPrivate->page_size; + + LOG_DEBUG("Offset: 0x%08x, Count: 0x%08x", (unsigned int)(offset), (unsigned int)(count)); + LOG_DEBUG("Page start: %d, Page End: %d", (int)(page_cur), (int)(page_end) ); + + // Special case: all one page + // + // Otherwise: + // (1) non-aligned start + // (2) body pages + // (3) non-aligned end. + + // Handle special case - all one page. + if( page_cur == page_end ){ + LOG_DEBUG("Special case, all in one page"); + r = sam3_page_read( pPrivate, page_cur, pagebuffer ); + if( r != ERROR_OK ){ + return r; + } + + page_offset = (offset & (pPrivate->page_size-1)); + memcpy( pagebuffer + page_offset, + buffer, + count ); + + r = sam3_page_write( pPrivate, page_cur, pagebuffer ); + if( r != ERROR_OK ){ + return r; + } + return ERROR_OK; + } + + // non-aligned start + page_offset = offset & (pPrivate->page_size - 1); + if( page_offset ){ + LOG_DEBUG("Not-Aligned start"); + // read the partial + r = sam3_page_read( pPrivate, page_cur, pagebuffer ); + if( r != ERROR_OK ){ + return r; + } + + // over-write with new data + n = (pPrivate->page_size - page_offset ); + memcpy( pagebuffer + page_offset, + buffer, + n ); + + r = sam3_page_write( pPrivate, page_cur, pagebuffer ); + if( r != ERROR_OK ){ + return r; + } + + count -= n; + offset += n; + buffer += n; + page_cur++; + } + + // intermediate large pages + // also - the final *terminal* + // if that terminal page is a full page + LOG_DEBUG("Full Page Loop: cur=%d, end=%d, count=0x%08x", + (int)page_cur, (int)page_end, (unsigned int)(count) ); + + while( (page_cur < page_end) && + (count >= pPrivate->page_size) ){ + r = sam3_page_write( pPrivate, page_cur, buffer ); + if( r != ERROR_OK ){ + return r; + } + count -= pPrivate->page_size; + buffer += pPrivate->page_size; + page_cur += 1; + } + + // terminal partial page? + if( count ){ + LOG_DEBUG("Terminal partial page, count=0x%08x", (unsigned int)(count)); + // we have a partial page + r = sam3_page_read( pPrivate, page_cur, pagebuffer ); + if( r != ERROR_OK ){ + return r; + } + // data goes at start + memcpy( pagebuffer, buffer, count ); + r = sam3_page_write( pPrivate, page_cur, pagebuffer ); + if( r != ERROR_OK ){ + return r; + } + buffer += count; + count -= count; + } + LOG_DEBUG("Done!"); + return ERROR_OK; +} + +static int +sam3_handle_info_command( struct command_context_s *cmd_ctx, char *cmd, char **argv, int argc ) +{ + struct sam3_chip *pChip; + void *vp; + const char *cp; + unsigned x; + int r; + + pChip = get_current_sam3(cmd_ctx); + if( !pChip ){ + return ERROR_OK; + } + + r = 0; + + // bank0 must exist before we can do anything + if( pChip->details.bank[0].pBank == NULL ){ + x = 0; + need_define: + command_print( cmd_ctx, + "Please define bank %d via command: flash bank %s ... ", + x, + at91sam3_flash.name ); + return ERROR_FAIL; + } + + // if bank 0 is not probed, then probe it + if( !(pChip->details.bank[0].probed) ){ + r = sam3_auto_probe( pChip->details.bank[0].pBank ); + if( r != ERROR_OK ){ + return ERROR_FAIL; + } + } + // above garentees the "chip details" structure is valid + // and thus, bank private areas are valid + // and we have a SAM3 chip, what a concept! + + + // auto-probe other banks, 0 done above + for( x = 1 ; x < SAM3_MAX_FLASH_BANKS ; x++ ){ + // skip banks not present + if( !(pChip->details.bank[x].present) ){ + continue; + } + + if( pChip->details.bank[x].pBank == NULL ){ + goto need_define; + } + + if( pChip->details.bank[x].probed ){ + continue; + } + + r = sam3_auto_probe( pChip->details.bank[x].pBank ); + if( r != ERROR_OK ){ + return r; + } + } + + + r = sam3_GetInfo( pChip ); + if( r != ERROR_OK ){ + LOG_DEBUG("Sam3Info, Failed %d\n",r); + return r; + } + + + // print results + cp = membuf_strtok( pChip->mbuf, "\n", &vp ); + while(cp){ + command_print(cmd_ctx,"%s", cp ); + cp = membuf_strtok( NULL, "\n", &vp ); + } + return ERROR_OK; +} + +static int +sam3_handle_gpnvm_command( struct command_context_s *cmd_ctx, char *cmd, char **argv, int argc) +{ + unsigned x,v; + uint32_t v32; + int r,who; + struct sam3_chip *pChip; + + pChip = get_current_sam3(cmd_ctx); + if( !pChip ){ + return ERROR_OK; + } + + if ( pChip->target->state != TARGET_HALTED ){ + LOG_ERROR("sam3 - target not halted"); + return ERROR_TARGET_NOT_HALTED; + } + + + if( pChip->details.bank[0].pBank == NULL ){ + command_print( cmd_ctx, "Bank0 must be defined first via: flash bank %s ...", + at91sam3_flash.name ); + return ERROR_FAIL; + } + if( !pChip->details.bank[0].probed ){ + r = sam3_auto_probe( pChip->details.bank[0].pBank ); + if( r != ERROR_OK ){ + return r; + } + } + + + switch( argc ){ + default: + command_print(cmd_ctx,"Too many parameters\n"); + return ERROR_COMMAND_SYNTAX_ERROR; + break; + case 0: + who = -1; + goto showall; + break; + case 1: + who = -1; + break; + case 2: + if( (0 == strcmp( argv[0], "show" )) && (0 == strcmp( argv[1], "all" )) ){ + who = -1; + } else { + r = parse_u32( argv[1], &v32 ); + if( r != ERROR_OK ){ + command_print( cmd_ctx, "Not a number: %s", argv[1] ); + return r; + } + who = v32; + } + break; + } + + if( 0 == strcmp( "show", argv[0] ) ){ + if( who == -1 ){ + showall: + for( x = 0 ; x < pChip->details.n_gpnvms ; x++ ){ + r = FLASHD_GetGPNVM( &(pChip->details.bank[0]), x, &v ); + if( r != ERROR_OK ){ + break; + } + command_print(cmd_ctx, "sam3-gpnvm%u: %u", x, v ); + } + return r; + } + if( (who >= 0) && (((unsigned)(who)) < pChip->details.n_gpnvms) ){ + r = FLASHD_GetGPNVM( &(pChip->details.bank[0]), who, &v ); + command_print(cmd_ctx, "sam3-gpnvm%u: %u", who, v ); + return r; + } else { + command_print(cmd_ctx, "sam3-gpnvm invalid GPNVM: %u", who ); + return ERROR_COMMAND_SYNTAX_ERROR; + } + } + + if( who == -1 ){ + command_print( cmd_ctx, "Missing GPNVM number"); + return ERROR_COMMAND_SYNTAX_ERROR; + } + + if( 0 == strcmp( "set", argv[0] ) ){ + r = FLASHD_SetGPNVM( &(pChip->details.bank[0]), who ); + } else if( (0 == strcmp( "clr", argv[0] )) || + (0 == strcmp( "clear", argv[0])) ){ // quietly accept both + r = FLASHD_ClrGPNVM( &(pChip->details.bank[0]), who ); + } else { + command_print( cmd_ctx, "Unkown command: %s", argv[0] ); + r = ERROR_COMMAND_SYNTAX_ERROR; + } + return r; +} + +static int +sam3_handle_slowclk_command( struct command_context_s *cmd_ctx, char *cmd, char **argv, int argc) +{ + uint32_t v; + int r; + + struct sam3_chip *pChip; + + pChip = get_current_sam3(cmd_ctx); + if( !pChip ){ + return ERROR_OK; + } + + + switch( argc ){ + case 0: + // show + break; + case 1: + // set + r = parse_u32( argv[0], &v ); + if( v > 200000 ){ + // absurd slow clock of 200Khz? + command_print(cmd_ctx,"Absurd/illegal slow clock freq: %d\n", (int)(v)); + return ERROR_COMMAND_SYNTAX_ERROR; + } + pChip->cfg.slow_freq = v; + break; + + default: + // error + command_print( cmd_ctx,"Too many parameters"); + return ERROR_COMMAND_SYNTAX_ERROR; + break; + } + command_print( cmd_ctx, "Slowclk freq: %d.%03dkhz", + (int)(pChip->cfg.slow_freq/ 1000), + (int)(pChip->cfg.slow_freq% 1000)); + return ERROR_OK; +} + + +static int sam3_registered; +static int +sam3_register_commands( struct command_context_s *cmd_ctx) +{ + command_t *pCmd; + + // only register once + if( !sam3_registered ){ + sam3_registered++; + + pCmd = register_command( cmd_ctx, NULL, "at91sam3", NULL, COMMAND_ANY, NULL ); + register_command( cmd_ctx, pCmd, + "gpnvm", + sam3_handle_gpnvm_command, + COMMAND_EXEC, + "at91sam3 gpnvm [action [], by default 'show', otherwise set|clear BIT"); + register_command( cmd_ctx, pCmd, + "info", + sam3_handle_info_command, + COMMAND_EXEC, + "at91sam3 info - print information about the current sam3 chip"); + register_command( cmd_ctx, pCmd, + "slowclk", + sam3_handle_slowclk_command, + COMMAND_EXEC, + "at91sam3 slowclk [VALUE] set the slowclock frequency (default 32768hz)"); + } + return ERROR_OK; +} + + +flash_driver_t at91sam3_flash = +{ + .name = "at91sam3", + .register_commands = sam3_register_commands, + + .flash_bank_command = sam3_flash_bank_command, + .erase = sam3_erase, + .protect = sam3_protect, + .write = sam3_write, + .probe = sam3_probe, + .auto_probe = sam3_auto_probe, + .erase_check = sam3_erase_check, + .protect_check = sam3_protect_check, + .info = sam3_info +}; + + + +/** + * Local Variables: ** + * mode: c ** + * c-basic-offset: 4 ** + * tab-width: 4 ** + * End: ** + */ diff --git a/src/flash/at91sam3.h b/src/flash/at91sam3.h new file mode 100755 index 0000000000..b137737d4a --- /dev/null +++ b/src/flash/at91sam3.h @@ -0,0 +1,23 @@ +/*************************************************************************** + * Copyright (C) 2009 by Duane Ellis * + * openocd@duaneellis.com * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the * + * Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + ***************************************************************************/ + + +// nothing to do here other then export this. +extern flash_driver_t at91sam3_flash; diff --git a/src/flash/flash.c b/src/flash/flash.c index 20d213ce0e..403aabf451 100644 --- a/src/flash/flash.c +++ b/src/flash/flash.c @@ -30,6 +30,7 @@ #include "flash.h" #include "image.h" #include "time_support.h" +#include "at91sam3.h" /* command handlers */ static int handle_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc); @@ -66,6 +67,7 @@ flash_driver_t *flash_drivers[] = { &lpc2000_flash, &cfi_flash, &at91sam7_flash, + &at91sam3_flash, &str7x_flash, &str9x_flash, &aduc702x_flash, diff --git a/tcl/board/atmel_sam3u_ek.cfg b/tcl/board/atmel_sam3u_ek.cfg new file mode 100755 index 0000000000..53c8d3483e --- /dev/null +++ b/tcl/board/atmel_sam3u_ek.cfg @@ -0,0 +1 @@ +source [find target/at91sam3u4e.cfg] diff --git a/tcl/target/at91sam3u1c.cfg b/tcl/target/at91sam3u1c.cfg new file mode 100755 index 0000000000..d338f305b2 --- /dev/null +++ b/tcl/target/at91sam3u1c.cfg @@ -0,0 +1,7 @@ +# common stuff +source [find target/at91sam3uxx.cfg] + +# size is automatically "calculated" by probing +flash bank at91sam3 0x000080000 0 1 1 $_TARGETNAME + + diff --git a/tcl/target/at91sam3u1e.cfg b/tcl/target/at91sam3u1e.cfg new file mode 100755 index 0000000000..d338f305b2 --- /dev/null +++ b/tcl/target/at91sam3u1e.cfg @@ -0,0 +1,7 @@ +# common stuff +source [find target/at91sam3uxx.cfg] + +# size is automatically "calculated" by probing +flash bank at91sam3 0x000080000 0 1 1 $_TARGETNAME + + diff --git a/tcl/target/at91sam3u2c.cfg b/tcl/target/at91sam3u2c.cfg new file mode 100755 index 0000000000..d338f305b2 --- /dev/null +++ b/tcl/target/at91sam3u2c.cfg @@ -0,0 +1,7 @@ +# common stuff +source [find target/at91sam3uxx.cfg] + +# size is automatically "calculated" by probing +flash bank at91sam3 0x000080000 0 1 1 $_TARGETNAME + + diff --git a/tcl/target/at91sam3u2e.cfg b/tcl/target/at91sam3u2e.cfg new file mode 100755 index 0000000000..d338f305b2 --- /dev/null +++ b/tcl/target/at91sam3u2e.cfg @@ -0,0 +1,7 @@ +# common stuff +source [find target/at91sam3uxx.cfg] + +# size is automatically "calculated" by probing +flash bank at91sam3 0x000080000 0 1 1 $_TARGETNAME + + diff --git a/tcl/target/at91sam3u4c.cfg b/tcl/target/at91sam3u4c.cfg new file mode 100755 index 0000000000..e8fdababaf --- /dev/null +++ b/tcl/target/at91sam3u4c.cfg @@ -0,0 +1,9 @@ +# common stuff +source [find target/at91sam3uxx.cfg] + +# size is automatically "calculated" by probing +flash bank at91sam3 0x000080000 0 1 1 $_TARGETNAME +# This is a 256K chip, it has the 2nd bank +flash bank at91sam3 0x000100000 0 1 1 $_TARGETNAME + + diff --git a/tcl/target/at91sam3u4e.cfg b/tcl/target/at91sam3u4e.cfg new file mode 100755 index 0000000000..9477ad0079 --- /dev/null +++ b/tcl/target/at91sam3u4e.cfg @@ -0,0 +1,9 @@ +# common stuff +source [find target/at91sam3uxx.cfg] + +# size is automatically "calculated" by probing +flash bank at91sam3 0x000080000 0 1 1 $_TARGETNAME +# This is a 256K chip - it has the 2nd bank +flash bank at91sam3 0x000100000 0 1 1 $_TARGETNAME + + diff --git a/tcl/target/at91sam3uXX.cfg b/tcl/target/at91sam3uXX.cfg new file mode 100755 index 0000000000..37f6b8ef25 --- /dev/null +++ b/tcl/target/at91sam3uXX.cfg @@ -0,0 +1,47 @@ +# script for ATMEL sam3, a CORTEX-M3 chip +# +# at91sam3u4e +# at91sam3u2e +# at91sam3u1e +# at91sam3u4c +# at91sam3u2c +# at91sam3u1c + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME sam3 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + + +#jtag scan chain +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + set _CPUTAPID 0x4ba00477 +} + +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID + +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME + +# 16K is plenty, the smallest chip has this much +$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size 16384 -work-area-backup 0 + +reset_config srst_only + +# GDB can use this +gdb_memory_map enable +# And GDB can flash the chip +gdb_flash_program enable + +$_TARGETNAME configure -event gdb-flash-erase-start { + halt +} -- 2.30.2