flash/nor: update support for TI MSP432 devices

Added fixes for issues found in additional code reviews.

Fixed host Endianness issues with using buffer reads
and writes instead of the *_u32 variants.

Changed code that tried to ID banks by hardcode
bank_number values to use instead the bank base
address. This fixes problems using configurations
with multiple devices.

Note that this replaces Change 4786 which has
been abandoned because of extensive changes to
the code to stop IDing banks by name.  And I
think I really messed up a rebase/merge on the
document file.

Tested on MSP432P401R, MSP432P4111, and MSP432E401Y
Launchpads.

Change-Id: Id05798b3aa78ae5cbe725ee762a164d673ee5767
Signed-off-by: Edward Fewell <efewell@ti.com>
Reviewed-on: http://openocd.zylin.com/5481
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

bluenrg-x: simplyfied the driver

Adopted only fast algorithm for flash programming:
- write_word and write_byte methods have been removed.
- start and end write alignments have been defined.
Moved flash controller registers offsets in a common file
shared with the flash algorithm.
- the flash base address is passed to the flash algorithm
  as a parameter.
Removed unused functions

Change-Id: I80aeab3994e477044bbcf02e66d9525dae0cb491
Signed-off-by: luca vinci <luca.vinci@st.com>
Reviewed-on: http://openocd.zylin.com/5393
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Michele Sardo <msmttchr@gmail.com>

bluenrg-x: added support for BlueNRG-LP device

Extended bluenrg-x flash driver with BlueNRG-LP flash controller.
Changes include:
- register set for the flash controller
- made software structure prone to support more easily future devices
- updated target config file

Change-Id: I2e2dc70db32cf98c62e3a43f2e44a4600a25ac5b
Signed-off-by: luca vinci <luca.vinci@st.com>
Reviewed-on: http://openocd.zylin.com/5343
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

helper/binarybuffer: fix clang static analyzer warnings

Writing bits to an uninitialized buffer generated false warnings.
Zero buffers before setting them by buf_set_u32|64()
(do it only if bit-by-bit copy loop is used,
zeroed buffer is not necessary if a fast path write is used)

Change-Id: I2f7f8ddb45b0cbd08d3e249534fc51f4b5cc6694
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/5383
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>

target/arm920t: fix clang static analyzer warning

Change-Id: I570dfb8b20a3f187f1fe660343cf0b75691e2c30
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/5375
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>

rtos/linux: fix use of memory after it is freed

Discovered by clang static analyzer

Change-Id: I9f64a67f281b95562d8fd6e2ebb0ae3f79ae8039
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/5371
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>

jtag/drivers/openjtag: fix clang static analyzer warnings

Change-Id: I900ce8157b3e220a4647871080bb9abc772446d1
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/5369
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>

jtag/aice: fix clang static analyzer warnings

Change-Id: I6c801c2406cd117f2bcf930a5b329c441ab5f1ff
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/5368
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>

flash/nor/numicro: use flash infrastructure to align write

The aligning code generated a clang static analyzer warning and
imposed huge memory leak. This part of code was removed and
flash infrastructure to alignment is used instead.

Not tested on hw!

Change-Id: I7c71da87547e71d595a7e7071ae5adcc1cecc827
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/5367
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>

flash/nor/fm4,tms470: fix clang static analyzer warnings

Change-Id: I18c1501918d40453fea6aeeb6f035e46d41fc524
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/5366
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>

src/flash/nor/at91sam3|4l|7: fix clang static analyzer warnings

Change-Id: I5cd2b2ebb2bd1980bdd1632b5c35bda9718a1089
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/5365
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>

flash/nor/stm32f1x: Group and cleanup device list

Group device list based on the device family and add clear
device family names.

Change-Id: I7a2dab1d1c0c8d141df02656c1964cb2c3fcbcd1
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/5423
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>

drivers: Rename 'libusb1_common' to 'libusb_helper'

The name 'common' does not make sense anymore. While at it,
remove some unnecessary #includes.

Change-Id: If9798a5cce179438d89428a598d8ca05c8e5f20c
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/5434
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>

drivers: libusb1_common code cleanup

Remove unncessary wrapper functions and 'jtag_' prefixes.

Change-Id: I0fd866ff1e1cf7386c4d58a808dfda2c1c0a1518
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/5433
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>

tcl/target: Drop old Renesas Gen2 SoC configs

Drop old Renesas Gen2 SoC configurations, as they were superseded by
the new unified config.

Change-Id: I7c2ccbdc13b01a552ce9cafdc1538f226beaa9f2
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Reviewed-on: http://openocd.zylin.com/5399
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>

remove libusb0_common support

Supporting two libusb versions provides additional development challenges
without additional advantage. In most cases we need to patch libusb0_common and
libusb1_common without real ability to test libusb0_common.

Change-Id: Icbb19c6809b14533fe2acf7a877377b3be4cbd61
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-on: http://openocd.zylin.com/5432
Tested-by: jenkins

tcl/target: Switch Renesas R-Car Gen2 boards to new config

Switch Renesas R-Car Gen2 boards which are currently supported from
the old ad-hoc SoC configuration to the new unified configuration.

Change-Id: I8a67bceb3ae92d840ae4dbac20868c75e83f7d58
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Reviewed-on: http://openocd.zylin.com/5398
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>

tcl/target: Add unified config for Renesas R-Car Gen2 targets

Add configuration for the Renesas R-Car Generation 2 targets.
These are SoCs with Cortex A15s and A7s. All cores currently
supported by OpenOCD are supported here as well as two new
cores, M2N and V2H, for the sake of support completeness.

Change-Id: Ib6fe70a91360b4f8bd69822ee28b6dea530cfa0a
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Reviewed-on: http://openocd.zylin.com/5397
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>

tcl/target: Abort on invalid SoC selection on R-Car Gen3

Instead of printing error message and continue, abort on invalid SoC
selection right away.

Change-Id: I9c7a7111b590c6c49a0826562380b881a162a8dc
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Reviewed-on: http://openocd.zylin.com/5439
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>

flash/stm32h7x: add support of STM32H7Ax/H7Bx devices

this new device has the following features:
 - single core cortex-M7
 - 2MB flash - dual bank
    - page size 8k
    - write protection grouped by 4 sectors
    - write block size 128 bits (16 bytes)

the bit definition of FLASH_CR is different than STM32H74x,
that's why we introduced a helper to compute the FLASH_CR value

Change-Id: I4da10cde8dd215b1b0f2645f0efdba9d198038d1
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: http://openocd.zylin.com/5441
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

Add support for SAMD21E17D device

Change-Id: Id0a533f8899b20cc87e3a9143383ddf279c86301
Signed-off-by: Michael Stoll <michael.stoll@meadow-robotics.com>
Reviewed-on: http://openocd.zylin.com/5458
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

target/arc: fix clang static analyzer warnings

Fixes:
* Removed typo in *bitfields initializations.
* Removed potentional memory leak allocating
  reg_data_type_struct_field/reg_data_type_flags_field objects.
* Initialize buffers with "0" before usage in buf_set_u32().
* Removed memory leak in jim_arc_add_reg().

Change-Id: Iefde57cd4a48c4f3350c376475df8642607f52ff
Signed-off-by: Evgeniy Didin <didin@synopsys.com>
Reviewed-on: http://openocd.zylin.com/5480
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>

Introduce ARCv2 architecture related code

This patch is an initial bump of ARC-specific code
which implements the ARCv2 target(EMSK board) initializing
routine and some basic remote connection/load/continue
functionality.

Changes:
03.12.2019:
-Add return value checks.
-Using static code analizer next fixes were made:
        Mem leak in functions:
                arc_jtag_read_memory,arc_jtag_read_memory,
                arc_jtag_write_registers, arc_jtag_read_registers,
                jim_arc_add_reg_type_flags, jim_arc_add_reg_type_struct,
                arc_build_reg_cache, arc_mem_read.
        Dead code in "arc_mem_read";
        In arc_save_context, arc_restore_context correct arguments
        in"memset" calls.
        In "build_bcr_reg_cache", "arc_build_reg_cache" check
        if list is not empty.

29.12.2019
-Moved code from arc_v2.c to arc.c
-Added checks of the result of calloc/malloc calls
-Reworked arc_cmd.c: replaced spagetty code with functions
-Moved to one style in if statements - to "if(!bla)"
-Changed Licence headers

22.01.2020
-Removed unused variables in arc_common
-Renamed register operation functions
-Introduced arc_deinit_target function
-Fixed interrupt handling in halt/resume:
        * add irq_state field in arc_common
        * fix irq enable/disable calls ( now STATUS32 register is used)
-Switched from buf_set(get)_us32() usage to target_buffer_set(get)_u32()
-Made some cleanup

30.01.2020
-Removed redundant arc_register struct, moved target link to arc_reg_desc
-Introduced link to BCR reg cache in arc_common for freeing memory.
-Now arc_deinit_target frees all arc-related allocated memory.
Valgrind shows no memory leaks.
-Inroduced arch description in arc.c

01.02.2020
-Remove small memory allocations in arc_init_reg. Instead created reg_value
and feature fields in arc_reg_desc.
-Add return value for arc_init_reg() func.
-Replaced some integer constants(61,62,63) with defines.
-Removed redundant conversions in arc_reg_get_field().
-Moved iccm/dccm configuration code from arc_configure()
to separate functions.

19.02.2020
-Change sizeof(struct) to sizeof(*ptr) in allocations
-Changed if/while(ptr != NULL) to if/while(ptr)
-Removed unused variables from struct arc_jtag
-Add additional structs to arc_reg_data_type
 to reduce amount of memory allocations calls
 and simplifying memory freeing.
-Add helper arc_reg_bitfield_t struct which includes
 reg_data_type_bitfield object and char[] name. Reduces
 memory allocations calls.
-Add limit for reg_type/reg_type_field names(20 symbols).
-Add in jim_arc_add_reg_type*() functions additional
 argnument checks(amount of field/name size).
-In jim_arc_add_reg_type*() reduced amount of memory allocations.
-Cleanup of jim_arc_add_reg_type*() functions.
-For commands update ".usage" fields according docopt.
-Cleanup in arc_jtag.c
-Renamed functions which require jtag_exeutre_queue() to arc_jtag_enque_*()
-Add arc_jtag_enque_register_rw() function, which r/w to jtag ir/dr regs
 during regiter r/w.

24.02:
-Change include guards in arc* files according coding style
-Remove _t suffix in struct arc_reg_bitfield_t
-Some cleanup

Change-Id: I6ab0e82b12e6ddb683c9d13dfb7dd6f49a30cb9f
Signed-off-by: Evgeniy Didin <didin@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Reviewed-on: http://openocd.zylin.com/5332
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>

coding style: doc: remove empty lines at end of text files

Empty lines at end of text files are useless.
Remove them.

Change-Id: I30e4d3d03c4ce846aa7bcefa7366f88732275557
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5170
Tested-by: jenkins

coding style: testing: remove empty lines at end of text files

Empty lines at end of text files are useless.
Remove them.

Change-Id: Id05a7bd944edccaa03ed9eb48599b2e262664cf0
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5169
Tested-by: jenkins

coding style: tools: remove empty lines at end of text files

Empty lines at end of text files are useless.
Remove them.

Change-Id: Iea4c8425e137d6252fb2e5b62e0b124c73a01cb6
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5168
Tested-by: jenkins

coding style: add newline at end of text files

Some text file is missing newline at EOF.
Add it.

Change-Id: Ieebc790096f40961283c644642e56fde975e957f
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5167
Tested-by: jenkins

coding style: fix space around pointer's asterisk

The script checkpatch available in new Linux kernel offers an
experimental feature for automatically fix the code in place.
While still experimental, the feature works quite well for simple
fixes, like spacing.

This patch has been created automatically with the script under
review for inclusion in OpenOCD, using the command
find src/ -type f -exec ./tools/scripts/checkpatch.pl \
-q --types POINTER_LOCATION --fix-inplace -f {} \;
then manually reviewed.

OpenOCD coding style does not mention the space around pointer's
asterisk, so no check is enforced. This patch only makes the style
uniform across the files.

The patch only changes amount and position of whitespace, thus
the following commands show empty diff
git diff -w
git log -w -p
git log -w --stat

Change-Id: Iefb4998e69bebdfe0d1ae65cadfc8d2c4f166d13
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5197
Tested-by: jenkins

log: let command "log_output" to set back its default

The default log output is stderr. After the command "log_output"
has been used to set an output log file, it is possible to return
back to stderr only on *NIX hosts specifying a new log output file
as "/dev/stderr", but this is not intuitive, not documented and
not portable out of *NIX.

Make command "log_output" able to set back the default output to
stderr when the parameter is either "default" or is missing.
While there, add debug message to log the change and make the
command return error on incorrect syntax.

Change-Id: I8c7c929780f58e2c23936737c8e7274a96734786
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5233
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

adi_v5_dapdirect: fix connect under reset

Deassert the reset only if connect under reset is not required;
otherwise, assert the reset.
This fix aligns the behavior of connect under reset in dapdirect
with the behavior in jtag and swd.

Change-Id: I937ef4320b44e51ef6cb0e349e12348dbfbe4abb
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5415
Tested-by: jenkins

flash/nor/stm32l4x: Minor code cleanups

Change-Id: I3053bbe888ac1f0a0593ef51bf9ca564f1cc27ec
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/5449
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

flash/nor/stm32h7x: Minor code cleanups

Change-Id: Ia212b1877abeda27f507de29a3aee2b171c1b8c6
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/5448
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Christopher Head <chead@zaber.com>

Support bitbanging on 64-bit ARM CPUs.

The configure.ac file restricted this to only 'arm' CPUs, but
${host_cpu} is 'aarch64' (not 'arm') for 64 bit ARM CPUs.

Tested on a Raspberry Pi compute module 3.

Change-Id: I6cb1d7e7fadc51dbb12419176f1faf0a0cb0b228
Signed-off-by: Mara Bos <m-ou.se@m-ou.se>
Reviewed-on: http://openocd.zylin.com/5274
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

tcl/board: update ST NUCLEO-H745ZI-Q configuration file to use dapdirect

this board embeds and STLINK DAP capable firmware

Change-Id: I276e9f44ad6cf7d1ff664898bbc884676bdbc967
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: http://openocd.zylin.com/5316
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

target/adi_v5_swd: fix clang static analyzer warning

Change-Id: I24b3e74b62fad469e3150ad97a10a9ab69c2793b
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/5374
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>

flash/nor/tcl.c: add filld command to write double-word with 64-bit value

Change-Id: I2eeda7af7d855ed1284083d025994f8fa9531969
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: http://openocd.zylin.com/5443
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

flash/nor/stm32l4x: lock flash after error

Also add locking after option write, it was missing at all.

Change-Id: I0227c6a74866f0fe8e40aa58616f0b3115ad5af0
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/5361
Tested-by: jenkins
Reviewed-by: Andreas Bolsch <hyphen0break@gmail.com>
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>

tcl/board: Add imx8mp-evk

Board includes an internal adapter (interface/ftdi/imx8mp-evk.cfg) and a
standard external ARM-10 connector.

Change-Id: Ibb301011665b1edfb95be1213d8100143f6839dd
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-on: http://openocd.zylin.com/5427
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

tcl/interface/ftdi: Add imx8mp-evk internal JTAG interface

The imx8mp-evk board has a FT4232H chip connected to the chip's JTAG
pins.

Switching between this on-board interface and the external ARM-10
connector is controlled by an GPIO which is behind an i2c expander
connected to the same FTDI chip.

Switching can be performed using the NXP bcu tool:

https://github.com/NXPmicro/bcu

Change-Id: Ic910515f76eaf09ea6d0f755b026fb09cf09ccfc
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-on: http://openocd.zylin.com/5426
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

flash/stm32h7x: use alignment infrastructure

Report the 32-byte alignemnt requirement via the bank structure rather
than enforcing it ad-hoc in the write routine. This allows people to do
non-32-byte-aligned writes if they want, with the infrastructure fixing
up the addresses passed to the low-level driver.

Change-Id: I2c4f532f2000435954a900224dbc9f2c30d1cc94
Signed-off-by: Christopher Head <chead@zaber.com>
Reviewed-on: http://openocd.zylin.com/5388
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

flash/nor/stm32f1x: Some small code cleanups

Change-Id: I1fc08b96b179a1376af233b713ae50d6ad7867a0
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/5404
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>

flash/nor/stm32h7x: check OPTCHANGEERR

Without this, a failed attempt to change option bytes will silently
appear to succeed but without actually changing the option bytes
(confusingly, the option bytes will still read back as if they had been
changed until a reboot as well!).

Change-Id: Id529c6c384a8a16be75f5702310670d99d8fac79
Signed-off-by: Christopher Head <chead@zaber.com>
Reviewed-on: http://openocd.zylin.com/5418
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>

flash/nor/stm32h7x: fix incorrect array indexing

Change-Id: Iec2246df284953d1442dfefdad8e70041690dfe2
Signed-off-by: Christopher Head <chead@zaber.com>
Reviewed-on: http://openocd.zylin.com/5417
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>

stlink: add trace support in DAP direct mode

Reuse the existing tracing functionality of HLA mode to support
tracing in DAP direct mode.

Change-Id: I75a01e88ba5d3e45717e4108b99697ac3225db9e
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5409
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>

armv8: check the core state to pass the correct arch to gdb

Commit 3799eded6761 ("target/aarch64: add support for
multi-architecture gdb") passes the constant string "aarch64" as
architecture to gdb. This is not working if the core is running
in 32 bits mode; gdb reports:
Truncated register 8 in remote 'g' packet
then closes the connection with OpenOCD.

Make the architecture string dependant from the current state of
the core.

Change-Id: I16e1614ea02ba29bf87f450b3dfe25c83c9a3612
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5234
Tested-by: jenkins
Reviewed-by: Muhammad Omair Javaid <omair.javaid@linaro.org>

coding style: use ARRAY_SIZE() when possible

We have the macro ARRAY_SIZE() already available. Use it!

Issue identified by checkpatch script from Linux kernel v5.1 using
the command

find src/ -type f -exec ./tools/scripts/checkpatch.pl \
-q --types ARRAY_SIZE -f {} \;

Change-Id: Ic7da9b710edf118eacb08f9e222f34208c580842
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5198
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

coding style: remove unnecessary parentheses

Identified by checkpatch script from Linux kernel v5.1 using the
command

find src/ -type f -exec ./tools/scripts/checkpatch.pl \
-q --types UNNECESSARY_PARENTHESES -f {} \;

then fixed manually.

Change-Id: Ia2d9a0953d9b89fc87dc1195aa05c7f63c068c48
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5196
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

jtag/startup.tcl: remove trailing whitespaces

Change-Id: I1d6f4f47ee6f8985c84ddb2647e029c5f4e6a55a
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5194
Tested-by: jenkins
Reviewed-by: Marc Schink <dev@zapb.de>

target/nds32: fix type of magic number

The macro NDS32_COMMON_MAGIC was cast-ed to int to avoid compile
time error for comparison type mismatch while comparing it with
the field common_magic.
This is incorrect because the macro value is a 32 bit unsigned
value; better changing the type of the field common_magic to keep
the unsigned value.

Issue identified by checkpatch script from Linux kernel v5.1 using
the command

find src/ -type f -exec ./tools/scripts/checkpatch.pl \
-q --types TYPECAST_INT_CONSTANT -f {} \;

Change-Id: Ib5924b6cecdffe70ab5c78d3b30a9c8e4deb7c7b
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5193
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

flash/nor/stm32lx: Minor code cleanups

Change-Id: I6440a4eb1f65a2f8ae2914b38f21a59955e85e0d
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/5438
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

jtag_vpi: added an option to stop simulation on exit

Command CMD_STOP_SIMU had been defined in jtag_vpi for a long time
(since the beginning?) but has not been utilized until now.
Its purpose is to signal to the jtag_vpi server (i.e. the RTL
simulation software) that the simulation shall be stopped.

This commit adds a TCL configuration command that selects whether
CMD_STOP_SIMU will be sent to the jtag_vpi server when OpenOCD is
about to exit. This functionality is off by default to maintain
identical behavior as in previous OpenOCD versions, unless the user
enables it explicitly.

Change-Id: If3894af6efa61038ccf6c9191f664e2128f2ef11
Signed-off-by: Jan Matyas <matyas@codasip.com>
Reviewed-on: http://openocd.zylin.com/5407
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

Include start-of-region address

When $ADDRESS == $BASE that address used to be excluded.

After this commit $ADDRESS == $BASE is within the range.

Now the rule for "iswithin" is:
$BASE <= $ADDRESS < ($BASE + $LEN)

Thanks to Antonio Borneo <borneo.antonio@gmail.com> for noticing this.

Change-Id: I74373c6010e069372d886fa7ecd8120892616834
Signed-off-by: Piotr Kasprzyk <ciri@ciri.pl>
Reviewed-on: http://openocd.zylin.com/4799
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

flash/stm32lx: mention explicitly that this driver covers STM32 L0 and L1

this is to avoid confusion with STM32 L4, L4+ and L5 families

also:
 - a warning message is changed to error
 - stm32l0x and stm32l1x aliases has been created to permit
   the usage of either names

Change-Id: If3f16d2a3b7d1369959aa7407da37a9076ea91d7
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: http://openocd.zylin.com/5437
Reviewed-by: Marc Schink <dev@zapb.de>
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

flash/startup.tcl: update stm32 flash driver aliases

This will enable us to use either name when calling flash driver commands.

For example the stm32wbx family use the same flash driver as the stm32l4x, so
the user has to use 'stm32l4x lock 0' which can be confusing.
Now the user can also use 'stm32wbx lock 0' with the same result.

Change-Id: Ic0d8da9afc202d7cc82d9b9949827e958a1cc824
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: http://openocd.zylin.com/5436
Tested-by: jenkins
Reviewed-by: Marc Schink <dev@zapb.de>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

jtag: Fix copy-paste error in 'irscan' help

Replace "Instruction Register (DR)" with "Instruction Register (IR)",
that is sed "s@DR@IR@", which was likely a copy-paste error.

Change-Id: I3e625872c855d655485b3efa5f50fe1c00ecbf52
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Reviewed-on: http://openocd.zylin.com/5446
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins

tcl: Remove executable bit

Change-Id: Ib452435b13c3cb8d14453d983151936238b9601d
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/5419
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Tested-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

efm32: add EFR32ZG13P and EFR32ZG14P parts

This adds the EFR32 Zen Gecko Family parts. The device family values are
found in table 4.7.11 of
https://www.silabs.com/documents/public/reference-manuals/efr32xg14-rm.pdf.

Change-Id: I3858b7ba815784b1150e2214a2833e8ff7d249e1
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Reviewed-on: http://openocd.zylin.com/5364
Tested-by: jenkins
Reviewed-by: Marc Schink <dev@zapb.de>

stlink: fix max packet size for 8 bit R/W on stlink-v3

While ST internal documentation for STLINK-V3 reports that 8 bits
read/write commands handle 512 bytes of data, a firmware bug makes
it crashing on high data size.
This is fixed with firmware V3J6 (shipped together with V2J36).

Check for firmware version to use the proper data size.

Change-Id: Iaba6cd26bbe130097c1c19de610680e0e8b69bfc
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: https://sourceforge.net/p/openocd/tickets/259/
Reviewed-on: http://openocd.zylin.com/5408
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

jtag: flush jtag queue after jtag_add_tlr()

If the TLR sequence is sent as result of the command "adapter
assert trst" while polling is off, the TLR sequence is not sent out
until a following jtag operation.

Flush the jtag queue before return.

Change-Id: I20efd7137cb7b1d1c4f73c1362cbe4e57aeaae49
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5405
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

Switch to HTTPS for submodules

repo.or.cz already redirects HTTP requests to HTTPS. There is therefore
no possible benefit to keeping the submodule URLs using HTTP—anyone who
can’t access via HTTPS will fail anyway, immediately after the redirect.
Changing the submodule URLs eliminates one unnecessary HTTP request and,
more importantly, eliminates SSLStrip-style attacks.

Change-Id: I9faf1ec8aa87bcfd1acafe2c445a0baf2abfbd09
Signed-off-by: Christopher Head <chead@zaber.com>
Reviewed-on: http://openocd.zylin.com/5406
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

tcl: fix remaining scripts after rework adapter commands

Some script have been added or modified after the patches for
reworking the adapter commands were pushed in gerrit.
Such scripts use the old command syntax and trigger a "deprecated"
warning at runtime.

Fix them with the same sed commands used for the other scripts:
sed -i 's/^interface /adapter driver /' $(find tcl/ -type f)
sed -i 's/adapter_khz/adapter speed/g' $(find tcl/ -type f)
sed -i 's/adapter_nsrst_delay/adapter srst delay/g' $(find tcl/ -type f)
sed -i 's/adapter_nsrst_assert_width/adapter srst pulse_width/g' $(find tcl/ -type f)

Change-Id: I0824d6c506a9af3eb9129b74c02a92b4eb1b100d
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5424
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
Tested-by: jenkins

tcl: Add interface config for isodebug isolated JTAG/SWD+UART

Currently only used internally at Unjo.

Change-Id: I7786e95e1bd755a73156ecad5b6d7f6273d8ddef
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/5251
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

jtag: drivers: xlnx-pcie-xvc: fix build on Linux pre v4.10

The macro PCI_CFG_SPACE_EXP_SIZE is exposed to userspace from
Linux kernel v4.10, with commit cc10385b6fde ("PCI: Move config
space size macros to pci_regs.h")
http://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=cc10385b6fde

Define the macro in the driver code, if not already defined.

Change-Id: I610219a2587eff2c142102b9f7830e3da882af78
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5435
Reviewed-by: Moritz Fischer <moritzf@google.com>
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Tested-by: jenkins

flash/nor: Add Renesas RPC HF driver

Add driver for the RPC block in HF mode on Renesas R-Car Gen3 SoCs.
This driver allows operating the on-SIP HF memory.

Note that HF is CFI compliant flash, but it is not memory mapped,
hence the need to replace all the memory accessors and read/write
functions. The write function is entirely replaced to increase
performance and is Spansion/AMD specific, since there is no known
SIP with other HF from another vendor.

Add the following two lines to board TCL file to bind the driver on
R-Car Gen3 SoC using HyperFlash:

  set _FLASHNAME $_CHIPNAME.flash
  flash bank $_FLASHNAME rpchf 0x08000000 0x4000000 2 2 $_CHIPNAME.a57.0

Change-Id: Ie18729d017eeb46e1363333ffe002d010dfc5ead
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Reviewed-on: http://openocd.zylin.com/5149
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>

flash/nor: Export various functions from the CFI core

Export various functions needed by other driver, specifically the
upcoming Renesas RPC HF driver. No functional change.

Change-Id: I551258979a7221288fb4f4382f857db5cfe0b0de
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Reviewed-on: http://openocd.zylin.com/5148
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>

jtag: Fix jtag_reset fallback

The fallback provided for the jtag_reset command always fails with a
strange message: 'Error: invalid command name "de"'

This is caused by incorrect quoting inside the warning message.

Fixes: c07b774e8f49 ("jtag: replace command "jtag_reset" with "adapter [de]assert"")
Change-Id: Icd47fca2b5a7b33474bfb0040e88193a0968f301
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-on: http://openocd.zylin.com/5416
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

tcl: replace the deprecated commands with "adapter ..."

Avoid annoying "deprecated" messages while running the scripts
distributed with OpenOCD code.
Change automatically created with commands
sed -i 's/adapter_khz/adapter speed/g' $(find tcl/ -type f)
sed -i 's/adapter_nsrst_delay/adapter srst delay/g' $(find tcl/ -type f)
sed -i 's/adapter_nsrst_assert_width/adapter srst pulse_width/g' $(find tcl/ -type f)

Minor indentation issue fixed manually in
tcl/board/at91sam9g20-ek.cfg
tcl/target/at91sam9260_ext_RAM_ext_flash.cfg

Change-Id: I425fd56c0c88cd6b06124621306eeb89166dfe71
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5284
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>

doc: replace example command "interface" with "adapter driver"

Keep documentation consisted after commands renaming.

Change-Id: I97b43887cae9d7c224b07e4ba0b7d04915a19fc4
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5285
Tested-by: jenkins
Reviewed-by: Marc Schink <dev@zapb.de>
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>

tcl: replace command "interface" with "adapter driver"

Avoid annoying "deprecated" messages while running the scripts
distributed with OpenOCD code.
Change automatically created with command
sed -i 's/^interface /adapter driver /' $(find tcl/ -type f)

Change-Id: I2291dfb96e164beecbeb3366ce83f9df2ad6c197
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5283
Reviewed-by: Marc Schink <dev@zapb.de>
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>

openocd: fix minor inconsistencies after renaming "adapter" command

Replace in the code any reference to the deprecated commands.

Change-Id: I75d28064017d664990b4024967900f32e196230a
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5282
Tested-by: jenkins
Reviewed-by: Marc Schink <dev@zapb.de>
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>

move ftdi_location deprecation helper to proper place

Change-Id: I927d4e918acbf321aea1dd7a8de95fbaa8fbbbf0
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-on: http://openocd.zylin.com/5278
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

jtag: adapter: rework adapter related commands

currently we have different types of same command group:
- starting with adapter_*
- starting with interface*
- without adapter or interface prefix.

Since interface name is already used, we can only use "adapter" command
group by keeping old commands as well.

Change-Id: Id0a1cb63a2ea6860c67ae1e7a3a06a37ddf464f4
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-on: http://openocd.zylin.com/4774
Reviewed-by: Marc Schink <dev@zapb.de>
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>

flash/nor/stm32l4x: fix minor errors in flash write/async algo

Fix comment of tested errors in asm src.

List all relevant errors in FLASH_ERROR mask: FLASH_PROGERR was missing
and any trial to re-program already programmed double word ended up
in the error bit held uncleared and flash write permanetly repeating
the error message until reset.

Lock the bank also after unsuccesfull write_block run.

Set async target algo block size to size of double word.

Remove warning in case of write_block success. In case of error
use LOG_ERROR instead of warning.

Change-Id: Ibf6d5e306a4c2eaa43de67d636b4902c737f02f3
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/5360
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>

flash/nor/stm32l4x: use flash infrastructure to align write

The original code paded the write chunk with random bytes by overrunning
the buffer. An user can easily regard the random bytes to
be a programming error.

Change-Id: Ib0f47b5bc406bc6a7c32f3d929bf324a17c7c1e1
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/5359
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>

tcl/board: Add config for STM32WB Nucleo board

Change-Id: Ic29802306c706bcf3e261c60facd01d101c9e1ce
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/5358
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Ilya Kharin <akscram@gmail.com>

target/arm_cti: fix regression from Tcl_return_values series

Since commit 7f260f5009a774f2d66b5f3037f8f595c6881d4d native OpenOCD
command handlers should not directly use Jim_SetResult functions.
The Tcl result of a native command is built as concatenation of
command_print() strings and Jim_SetResult() is called after return
of the command handler.

Replace "wrong number of args" error messages (now not delivered to user)
by simply return ERROR_COMMAND_SYNTAX_ERROR

Change-Id: I40c1374a13859cefbdef68e0f1c13ab93538bd50
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/5363
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>

flash/nor/nrf5: Fix build error on OSX

The chip->hwid is uint32_t , fix the print format.
This was detected by TravisCI on OSX, where this triggers a build error.

Change-Id: I776a7bb50e396c8fccc24500dec4750190da7982
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Reviewed-on: http://openocd.zylin.com/5401
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Ilya Kharin <akscram@gmail.com>

jtag: drivers: xlnx-pcie-xvc: fix build after merge

Commit [1] was submitted in gerrit well before the conflicting
commit [2] get merged in master branch. While it was fine
committing in master branch [1] alone, it should not be
committed "as is" after [2].
Unfortunately gerrit did not complained committing [1] after [2].
The result is that master branch does not build anymore when the
driver xlnx-pcie-xvc is enabled at configure time by the optional
flag --enable-xlnx-pcie-xvc.

Apply to the driver the required changes as in [2].
While there, remove the duplicated struct xlnx_pcie_xvc_transports
and the struct field already implicitly initialized to zero.

[1] ff6d0704ecd6 ("jtag: drivers: xlnx-pcie-xvc: Add support for
    Xilinx XVC/PCIe")
[2] efd1d642220a ("adapter: switch from struct jtag_interface to
    adapter_driver")

Change-Id: I5498479b802a231afbee1b845ae9775e1da7c728
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5402
Reviewed-by: Moritz Fischer <moritzf@google.com>
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>

flash/nor/sh_qspi: Add SH QSPI driver

Add driver for the SH QSPI controller. This SPI controller is often
connected to the boot SPI NOR flash on R-Car Gen2 platforms.

Add the following two lines to board TCL file to bind the driver on
R-Car Gen2 SoC and make SRAM work area available:

  flash bank flash0 sh_qspi 0xe6b10000 0 0 0 ${_TARGETNAME}0 cs0
  ${_TARGETNAME}0 configure -work-area-phys 0xe6300000 -work-area-virt 0xe6300000 -work-area-size 0x10000 -work-area-backup 0

To install mainline U-Boot on the board, use the following procedure:

  proc update_uboot {} {
    # SPL
    flash erase_sector 0 0x0 0x0
    flash write_bank 0 /u-boot/spl/u-boot-spl.bin 0x0
    # U-Boot
    flash erase_sector 0 0x5 0x6
    flash write_bank 0 /u-boot/u-boot.img 0x140000
  }

Change-Id: Ief22f61e93bcabae37f6e371156dece6c4be3459
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
---
V2: - Add Makefile and linker script for the SH QSPI IO algorithm
    - Include the algorithm code instead of hard-coding it
Reviewed-on: http://openocd.zylin.com/5143
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>

jtag_libusb_bulk_read|write: return error code instead of size

A USB bulk write/read operation may fail with different errors:
 LIBUSB_ERROR_TIMEOUT if the transfer timed out (and populates transferred)
 LIBUSB_ERROR_PIPE if the endpoint halted
 LIBUSB_ERROR_OVERFLOW if the device offered more data, see Packets and overflows
 LIBUSB_ERROR_NO_DEVICE if the device has been disconnected
 another LIBUSB_ERROR code on other failures

Current OpenOCD code is using the transfer size based error detection.
Which may not always work. For example for LIBUSB_ERROR_OVERFLOW as libusb
documentation says:
"Problems may occur if the device attempts to send more data than can fit in
the buffer. libusb reports LIBUSB_TRANSFER_OVERFLOW for this condition but
other behaviour is largely undefined: actual_length may or may not be accurate,
the chunk of data that can fit in the buffer (before overflow) may or may not
have been transferred."

This patch is refactoring code to use actual error return value for
error detection instead of size.

Change-Id: Iec0798438ca7b5c76e2e2912af21d9aa76ee0217
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-on: http://openocd.zylin.com/4590
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>

mips_ejtag: there is no DCR.MIPS64 bit

available revisions (2.60, 3.10, 5.06 and 6.10) of
MD00047 (EJTAG specification), have only in IMPCODE
MIPS32/MIPS64 bit/flag.

Change-Id: If9191b6ced760c59bb7551bb041cd72b0a060bb1
Signed-off-by: Jiri Kastner <cz172638@gmail.com>
Reviewed-on: http://openocd.zylin.com/4628
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
Tested-by: jenkins

jtag: drivers: xlnx-pcie-xvc: Add support for Xilinx XVC/PCIe

Add support for Xilinx Virtual Cable over PCIe JTAG controller.
It is commonly used in Xilinx based PCI Express designs with JTAG IP
in the FPGA fabric.

Access to the JTAG registers happens via the PCI Express extended
configuration space.

This can be used to debug soft-cores instantiated in the FPGA fabric.

The clang static checker doesn't find any new problems with this change.

Change-Id: Ib12ede0d1f26dacfda808d5e05b947b640c5bde7
Signed-off-by: Moritz Fischer <moritzf@google.com>
Reviewed-on: http://openocd.zylin.com/5314
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Marex
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>

flash/nor: Rename flash_address() to cfi_flash_address()

This is a preparatory change, align the function name with the rest
of the API, no functional change.

Change-Id: I6a810d2a54edcd13ad9a87d24a7334802c41623b
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Reviewed-on: http://openocd.zylin.com/5391
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

flash/nor: Rename get_cfi_info() to cfi_get_info()

This is a preparatory change, align the function name with the rest
of the API, no functional change.

Change-Id: Ib967520f027b03eb1792b36ede52335df8e23941
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Reviewed-on: http://openocd.zylin.com/5390
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

flash/nor: Allow CFI memory read/write functions be overriden

Add possibility to supply custom CFI memory accessors via cfi_info
and override the default memory-mapped ones.

Change-Id: I1b6bc1db69fc33e8cdef96c41742c40e6d8917e9
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Reviewed-on: http://openocd.zylin.com/5147
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

flash/nor: Drop size argument of cfi_target_{read,write}_memory()

The size argument is always set to bank->bus_width and bank pointer
is now passed into cfi_target_{read,write}_memory(), so the size
can be accessed through the bank pointer inside the function instead
of being explicitly passed in.

Change-Id: I0abc1cc3bf513281c10cb5de7a21cb0e75cb7676
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Reviewed-on: http://openocd.zylin.com/5389
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

flash/nor: Pass flash_bank to memory accessors

Replace passing in struct target with passing in struct flash_bank,
so that the later can contain function pointers to custom per-driver
memory accessor functions.

Change-Id: Id2573a6d5f1a73ed9c4f73c53592a9a335a11c99
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Reviewed-on: http://openocd.zylin.com/5146
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

target/xscale: remove duplicated command

Reported by clang static analyzer.

Change-Id: I893af10852af4885507ed62d024008159a80dd56
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/5382
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>

target/etm: add check for calloc error

and fix one more clang static analyzer warning.

Change-Id: I17f03e318e1cf7617e7f753e7ca960552be547e5
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/5381
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>

target/semihosting_common: fix minor memory leak

Reported by clang static analyzer.

Change-Id: Ie663f49d92588c0d8b502cfdd8fc34004b308066
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/5380
Reviewed-by: Liviu Ionescu <ilg@livius.net>
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>

target/target: fix clang static analyzer warnings

Change-Id: I23e6586be60915f21a7179a994a1ec93fb9b2c36
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/5379
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>

target/avr32_jtag: fix error returns

Fixed only 2 error returns discovered by clang static analyzer.
There are obviously many more missing error tests in avr32_jtag.c
These was not fixed to keep this change minimal.
Not tested with hw.

Change-Id: I6c79f6248db774990ddb42c0dacdb621651ed69e
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/5378
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>

target/arm_dpm: add missing error returns

Discoverd by clang static analyzer.

Change-Id: I93d5de0a36216e62b170fe8cc870431226a7777f
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/5377
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>

target/arm946e: add missing error detection

Discoverd by clang static analyzer.
While on it remove useless type casts from arm946e_read_cp15() parameter.

Change-Id: I549e19685b431400243800ee0f7d1bbe6cdb14b4
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/5376
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>

server/server: fix clang static analyzer warning

Change-Id: I317e189b62540e3688a20d88a95f551280317f14
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/5373
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>

xsvf: fix memory leak

Discovered by clang static analyzer.

Change-Id: I2980586aea5ee43226adb1f4cf72e7ba1dfddd83
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/5372
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>

flash/nor/stm32l4x: add support of STM32L4P5/L4Q5x devices

STM32L4P/Q devices have:
 - similar flash layout as STM32L4R/S devices
 - 1024K of flash memory (some parts have 512K only)

tested on NUCLEO-L4P5ZG using board/st_nucleo_l4.cfg

Change-Id: I77047351bc7dcd7c76d0f31a77be73005104a06f
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: http://openocd.zylin.com/5392
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

flash/nor: add support of STM32WB on top STM32L4 flash driver

Change-Id: I9fb6700085d817d35a691f6484193f67939a4e0f
Signed-off-by: Laurent LEMELE <laurent.lemele@st.com>
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: http://openocd.zylin.com/4933
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

flash/nor: add support of STM32L41/L42xx

tested using STM32L412KB

Change-Id: I1e2ae93d8c740db219f0fb579940de7f2fffac15
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: http://openocd.zylin.com/4934
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

flash/nor/stm32l4x : add structure containers to hold devices' information

This rework is inspired from the 'flash/nor/stm32h7x.c'
This rework will ease the support of new devices on top of this driver:
  for example: STM32WB have different flash base and size addresses

Notes:
 - stm32l4_probe modified in order to charge the correct part_info from
   the defined stm32l4_parts according to the device id
 - stm32l4_flash_bank.bank2_start is replaced by .part_info->bank1_sectors
 - STM32_FLASH_BASE is removed , part_info->flash_regs_base will be used instead
   based on that flash register addresses are changed to offsets,
   >> stm32l4_get_flash_reg was modified accordingly
 - stm32l4_read_option and stm32l4_write_option was modified to accept an
   offset instead of an absolute address, luckily this is the commands'
   argument by default
 - stm32l4_mass_erase modifications :
     - use MER2 only on top of dual bank devices
     - wait for BUSY bit before starting the mass erase

Change-Id: Ib35bfc3cbadc76bbeaaaba9005b82077b9e1e744
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: http://openocd.zylin.com/4932
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Andreas Bolsch <hyphen0break@gmail.com>

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)