openocd.git
14 months agotarget/cortex_m: fix incorrect comment 20/4620/2
Christopher Head [Tue, 31 Jul 2018 17:05:36 +0000 (10:05 -0700)]
target/cortex_m: fix incorrect comment

The code sets C_MASKINTS if that bit is not already set (correctly). Fix
the comment to agree.

Change-Id: If4543e2660a9fa2cdabb2d2698427a6c8d9a274c
Signed-off-by: Christopher Head <chead@zaber.com>
Reviewed-on: http://openocd.zylin.com/4620
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
14 months agoserver/server: Add ability to remove services 54/4054/5
Marc Schink [Mon, 19 Dec 2016 19:09:08 +0000 (20:09 +0100)]
server/server: Add ability to remove services

Add the ability to remove services while OpenOCD is running.

Change-Id: I4067916fda6d03485463fa40901b40484d94e24e
Signed-off-by: Marc Schink <openocd-dev@marcschink.de>
Reviewed-on: http://openocd.zylin.com/4054
Tested-by: jenkins
Reviewed-by: Fredrik Hederstierna <fredrik@hederstierna.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
14 months agortos: add support for NuttX 03/4103/16
Masatoshi Tateishi [Sun, 9 Apr 2017 23:48:44 +0000 (08:48 +0900)]
rtos: add support for NuttX

This patch introduces RTOS support for NuttX. Currently,
only ARM Cortex-M (both FPU and FPU-less) targets are supported.

To use, add the following lines to ~/.gdbinit.

define hookpost-file
  eval "monitor nuttx.pid_offset %d", &((struct tcb_s *)(0))->pid
  eval "monitor nuttx.xcpreg_offset %d", &((struct tcb_s *)(0))->xcp.regs
  eval "monitor nuttx.state_offset %d", &((struct tcb_s *)(0))->task_state
  eval "monitor nuttx.name_offset %d", &((struct tcb_s *)(0))->name
  eval "monitor nuttx.name_size %d", sizeof(((struct tcb_s *)(0))->name)
end

And please make sure the above values are the same as in
src/rtos/nuttx_header.h

Change-Id: I2aaf8644d24dfb84b500516a9685382d5d8fe48f
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Signed-off-by: Masatoshi Tateishi <Masatoshi.Tateishi@jp.sony.com>
Signed-off-by: Nobuto Kobayashi <Nobuto.Kobayashi@sony.com>
Reviewed-on: http://openocd.zylin.com/4103
Tested-by: jenkins
Reviewed-by: Alan Carvalho de Assis <acassis@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
14 months agonrf5: add free_driver_priv 08/4608/4
Jim Paris [Fri, 20 Jul 2018 15:14:34 +0000 (11:14 -0400)]
nrf5: add free_driver_priv

Change-Id: I429a9868deb0c4b51f47a4bbad844bdc348e8d21
Signed-off-by: Jim Paris <jim@jtan.com>
Reviewed-on: http://openocd.zylin.com/4608
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
14 months agotarget/arm_adi_v5: add command "dpreg" 12/4612/2
Antonio Borneo [Tue, 22 May 2018 22:55:03 +0000 (00:55 +0200)]
target/arm_adi_v5: add command "dpreg"

For very low level debug or development around DAP, it is useful
to have direct access to DP registers.

Add command "dpreg" by mimic the syntax of the existing "apreg"
command:
$dap_name dpreg reg [value]

Change-Id: Ic4ab451eb5e74453133adee61050b4c6f656ffa3
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4612
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
14 months agoflash/nor/tcl.c: fix flash bank bounds check in 'flash fill' command handler 16/4516/3
Bohdan Tymkiv [Thu, 3 May 2018 19:50:58 +0000 (22:50 +0300)]
flash/nor/tcl.c: fix flash bank bounds check in 'flash fill' command handler

Steps to reproduce ( STM32F103 'Blue Pill', 128KiB of flash ):
> flash fillh 0x0801FFFE 00 1
wrote 2 bytes to 0x0801fffe in 0.019088s (0.102 KiB/s)
> flash fillw 0x0801FFFE 00 1
Error: stm32f1x.cpu -- clearing lockup after double fault
Error: error waiting for target flash write algorithm
Error: error writing to flash at address 0x08000000 at offset 0x0001fffe

Change-Id: I145092ec5e45bc586b3df48bf37c38c9226915c1
Signed-off-by: Bohdan Tymkiv <bhdt@cypress.com>
Reviewed-on: http://openocd.zylin.com/4516
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
14 months agozy1000: fix compile error with gcc 8.1.1 14/4614/2
Antonio Borneo [Thu, 19 Jul 2018 07:38:05 +0000 (09:38 +0200)]
zy1000: fix compile error with gcc 8.1.1

The fall-through comment is not taken in consideration by gcc 8.1.1
because it is inside the braces of a C-code block.

Move the comment outside the C block.

Change-Id: I22d87b2dee109fb8bcf2071ac55fdf7171ffcf4b
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4614
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
14 months agoserver: explicitly call "shutdown" when catch CTRL-C or a signal 51/4551/3
Antonio Borneo [Fri, 1 Jun 2018 16:31:49 +0000 (18:31 +0200)]
server: explicitly call "shutdown" when catch CTRL-C or a signal

Every TCL command can be renamed (or deleted) and then replaced by
a TCL proc that has the same name of the original TCL command.
This can be used either to completely replace an existing command
or to wrap the original command to extend its functionality.
This applies also to the OpenOCD command "shutdown" and can be
useful, for example, to set back some default value to the target
before quitting OpenOCD.
E.g. (TCL code):
rename shutdown original_shutdown
proc shutdown {} {
puts "This is my implementation of shutdown"
# my own stuff before exit OpenOCD
original_shutdown
}

Unfortunately, sending a signal (or pressing CTRL-C) to terminate
OpenOCD doesn't trigger calling the original "shutdown" command
nor its (eventual) replacement.

Detect if the main loop is terminated by an external signal and
in such case execute explicitly the command "shutdown".
Replace with enum the magic numbers assumed by "shutdown_openocd".

Please notice that it's possible to write a custom "shutdown" TCL
proc that does not call the original "shutdown" command. This is
useful, for example, to prevent the user to quit OpenOCD by typing
"shutdown" in the telnet session.
Such case will not prevent OpenOCD to terminate when receiving a
signal; OpenOCD will quit after executing the custom "shutdown"
command.

Change-Id: I86b8f9eab8dbd7a28dad58b8cafd97caa7a82f43
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4551
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
14 months agotarget/riscv: fix compile error with gcc 8.1.1 18/4618/2
Antonio Borneo [Wed, 25 Jul 2018 20:51:51 +0000 (22:51 +0200)]
target/riscv: fix compile error with gcc 8.1.1

Fix compile error:
src/target/riscv/riscv-011.c: In function ‘slot_offset’:
src/target/riscv/riscv-011.c:238:4: error: this statement may fall through
 [-Werror=implicit-fallthrough=]
    switch (slot) {
    ^~~~~~
src/target/riscv/riscv-011.c:243:3: note: here
   case 64:
   ^~~~

Fixes: a51ab8ddf63a ("Add RISC-V support.")
Change-Id: I7fa86b305bd90cc590fd4359c3698632d44712e5
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4618
Tested-by: jenkins
Reviewed-by: Jiri Kastner <cz172638@gmail.com>
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-by: Tim Newsome <tim@sifive.com>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
14 months agotarget|board: Add Intel (Altera) Arria 10 target and related board 83/4583/7
Oleksij Rempel [Thu, 28 Jun 2018 10:18:07 +0000 (12:18 +0200)]
target|board: Add Intel (Altera) Arria 10 target and related board

Target information about this SoC can be found here:
https://www.altera.com/products/fpga/arria-series/arria-10/overview.html

Achilles Instant-Development Kit Arria 10 SoC SoM:
https://www.reflexces.com/products-solutions/development-kits/arria-10/achilles-instant-development-kit-arria-10-soc-som

Change-Id: Id78c741be6a8b7d3a70f37d41088e47ee61b437a
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-on: http://openocd.zylin.com/4583
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
14 months agofpga/altera-10m50: add all device id 98/4598/2
Oleksij Rempel [Tue, 10 Jul 2018 07:55:54 +0000 (09:55 +0200)]
fpga/altera-10m50: add all device id

add all currently know Intel (Alter) MAX 10 device ids

Change-Id: I6a88fef222c8e206812499d41be863c3d89fa944
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-on: http://openocd.zylin.com/4598
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
14 months agotcl/board: add DPTechnics DPT-Board-v1 24/4424/2
Oleksij Rempel [Mon, 19 Feb 2018 16:00:17 +0000 (17:00 +0100)]
tcl/board: add DPTechnics DPT-Board-v1

it is Atheros AR9331 based IoT dev board.

Change-Id: I6fc3cdea1bef49c53045018ff5acfec4d5610ba6
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-on: http://openocd.zylin.com/4424
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
14 months agotcl/target/atheros_ar9331: add documentation and extra helpers 23/4423/2
Oleksij Rempel [Sat, 2 Dec 2017 18:55:11 +0000 (19:55 +0100)]
tcl/target/atheros_ar9331: add documentation and extra helpers

Sync it with experience gathered on Qualcomm QCA4531 SoC. This
chips are in many ways similar.

Change-Id: I06b9c85e5985a09a9be3cb6cc0ce3b37695d2e54
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-on: http://openocd.zylin.com/4423
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
14 months agotcl/target/atheros_ar9331: add DDR2 helper 22/4422/2
Oleksij Rempel [Mon, 19 Feb 2018 14:49:31 +0000 (15:49 +0100)]
tcl/target/atheros_ar9331: add DDR2 helper

this helper works on many different boards, so it is
good to have it in target config

Change-Id: I068deac36fdd73dbbcedffc87865cc5b9d992c1d
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-on: http://openocd.zylin.com/4422
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
14 months agotcl/target|board: move common AR9331 code to atheros_ar9331.cfg 99/2999/5
Antony Pavlov [Sun, 20 Sep 2015 13:52:37 +0000 (16:52 +0300)]
tcl/target|board: move common AR9331 code to atheros_ar9331.cfg

The ar9331_25mhz_pll_init and ar9331_ddr1_init routines
can be used not only for TP-Link MR3020 board,
so move them to the common atheros_ar9331.cfg file.

Change-Id: I04090856b08151d6bb0f5ef9cc654efae1c81835
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Reviewed-on: http://openocd.zylin.com/2999
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
14 months agotcl/board: add config for 8devices LIMA board 06/4406/4
Oleksij Rempel [Wed, 31 Jan 2018 10:58:50 +0000 (11:58 +0100)]
tcl/board: add config for 8devices LIMA board

More information about this board can be found here:
https://www.8devices.com/products/lima

Change-Id: Id35a35d3e986630d58d37b47828870afd107cc6a
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-on: http://openocd.zylin.com/4406
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
14 months agotcl/target: add config for Qualcomm QCA4531 05/4405/4
Oleksij Rempel [Wed, 31 Jan 2018 10:54:39 +0000 (11:54 +0100)]
tcl/target: add config for Qualcomm QCA4531

The QCA4531 is a two stream (2x2) 802.11b/g/n single-band programmable
Wi-Fi System-on-Chip (SoC) for the Internet of Things (IoT).
https://www.qualcomm.com/products/qca4531

Change-Id: I58398c00943b005cfaf0ac1eaad92d1fa4e2cba7
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-on: http://openocd.zylin.com/4405
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
14 months agomips_m4k: add optional reset handler 04/4404/2
Oleksij Rempel [Sat, 10 Feb 2018 15:37:31 +0000 (16:37 +0100)]
mips_m4k: add optional reset handler

In some cases by using SRST we can't halt CPU early enough. And
option PrRst is not available too. In this case the only way is
to set BOOT flag over EJTAG and reset CPU or SoC from CPU itself.
For example by writing to some reset register.

This patch is providing possibility to use user defined reset-assert
handler which will be enabled only in case SRST is disabled. It is
needed to be able switch between two different reset variants on run
time.

Change-Id: I6ef98f1871ea657115877190f7cc7a5e8f3233e4
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-on: http://openocd.zylin.com/4404
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
14 months agotarget/cortex_a: fix compile error for uninitialized variable 19/4619/2
Paul Bartholomew [Wed, 25 Jul 2018 20:59:01 +0000 (22:59 +0200)]
target/cortex_a: fix compile error for uninitialized variable

Commit ad6c71e151590f9d07eb07eda978a8d2a845259c introduced the
variable "mmu_enabled" whose pointer is passed to cortex_a_mmu()
that initialises it.
This initialization is not visible to the compiler that issue
a compile error.
The same situation is common across the same file and the usual
workaround is to initialize it to zero; thus the same fix i
applied here.

Ticket: https://sourceforge.net/p/openocd/tickets/197/
Fixes: commit ad6c71e15159 ("cortex_a: fix virt2phys when mmu is disabled")
Change-Id: I77dec41acdf4c715b45ae37b72e36719d96d9283
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4619
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
14 months agotarget/cortex_m: make a variable local 06/4606/2
Christopher Head [Tue, 17 Jul 2018 20:59:38 +0000 (13:59 -0700)]
target/cortex_m: make a variable local

The vec_ids variable is not referenced anywhere other than the vector
catch command handler. Make it local to that function.

Change-Id: Ie5865e8f78698c19a09f0b9d58269ced1c9db440
Signed-off-by: Christopher Head <chead@zaber.com>
Reviewed-on: http://openocd.zylin.com/4606
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
14 months agodrivers: cmsis-dap: print serial if available 05/3405/3
Karl Palsson [Wed, 13 Apr 2016 23:45:12 +0000 (23:45 +0000)]
drivers: cmsis-dap: print serial if available

Helpful for sanity checking connections

Change-Id: Ife0d8b4e12d4c03685aac8115c9739a4c1e994fe
Signed-off-by: Karl Palsson <karlp@tweak.net.au>
Reviewed-on: http://openocd.zylin.com/3405
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
14 months agocortex_a: fix virt2phys when mmu is disabled 80/4480/6
Matthias Welwarsky [Fri, 15 Jul 2016 12:23:25 +0000 (14:23 +0200)]
cortex_a: fix virt2phys when mmu is disabled

When the MMU is not enabled on debug state entry, virt2phys cannot
perform a translation since it is unknown whether a valid MMU
configuration existed before. In this case, return the virtual
address as physical address.

Change-Id: I6f85a7a5dbc200be1a4b5badf10a1a717f1c79c0
Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com>
Reviewed-on: http://openocd.zylin.com/4480
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
14 months agousb_blaster: Don't unnecessarily go through DR-/IR-Pause 45/4245/3
Daniel Glöckner [Wed, 4 Oct 2017 21:07:53 +0000 (23:07 +0200)]
usb_blaster: Don't unnecessarily go through DR-/IR-Pause

There is no need to pass through DR-/IR-Pause after a scan if we want to
go to DR-/IR-Update. We just have to skip the first step of the path to
the end state because we already did that step when shifting the last
bit.

v2:
 - Fix comments as remarked in review of v1

Change-Id: I3c10f02794b2233f63d2150934e2768430873caa
Signed-off-by: Daniel Glöckner <daniel-gl@gmx.net>
Reviewed-on: http://openocd.zylin.com/4245
Tested-by: jenkins
Reviewed-by: Christopher Head <chead@zaber.com>
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
14 months agoAdd RISC-V support. 78/4578/5
Tim Newsome [Wed, 18 Jul 2018 20:34:23 +0000 (13:34 -0700)]
Add RISC-V support.

This supports both 0.11 and 0.13 versions of the debug spec.

Support for `-rtos riscv` will come in a separate commit since it was
easy to separate out, and is likely to be more controversial.

Flash support for the SiFive boards will also come in a later commit.

Change-Id: I1d38fe669c2041b4e21a5c54a091594aac3e2190
Signed-off-by: Tim Newsome <tim@sifive.com>
Reviewed-on: http://openocd.zylin.com/4578
Tested-by: jenkins
Reviewed-by: Liviu Ionescu <ilg@livius.net>
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
14 months agoarm_adi_v5: put SWJ-DP back to JTAG mode at exit 93/4493/5
Antonio Borneo [Sun, 10 Jun 2018 12:39:26 +0000 (14:39 +0200)]
arm_adi_v5: put SWJ-DP back to JTAG mode at exit

When SWD mode is used, current OpenOCD code left the SWJ-DP in
SWD mode at exit. Also, current code is unable to switch back the
SWJ-DP in JTAG at next run, thus a power cycle of both target and
interface is required in order to run OpenOCD in JTAG mode again.

Put the SWJ-DP back to JTAG mode before exit from OpenOCD.

Use switch_seq(SWD_TO_JTAG) instead of dap_to_jtag(), because the
latter is not implemented on some interfaces. This is aligned
with the use of switch_seq(JTAG_TO_SWD) in swd_connect().

Change-Id: I55d3faebe60d6402037ec39dd9700dc5f17c53b0
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4493
Tested-by: jenkins
Reviewed-by: Bohdan Tymkiv <bhdt@cypress.com>
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
14 months agodrivers: cmsis_dap_usb: implement cmd JTAG_TMS 17/4517/2
Antonio Borneo [Mon, 16 Apr 2018 20:54:22 +0000 (22:54 +0200)]
drivers: cmsis_dap_usb: implement cmd JTAG_TMS

Simply add a wrapper around cmsis_dap_cmd_DAP_SWJ_Sequence()

Change-Id: Icf86f84b24e9fec56e2f9e155396aac34b0e06d2
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4517
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
14 months agoRemove FSF mailing address. 59/4559/2
Tim Newsome [Mon, 11 Jun 2018 19:47:52 +0000 (12:47 -0700)]
Remove FSF mailing address.

Checkpatch complains about this (FSF_MAILING_ADDRESS).

Change-Id: Ib46a7704f9aed4ed16ce7733d43c58254a094149
Signed-off-by: Tim Newsome <tim@sifive.com>
Reviewed-on: http://openocd.zylin.com/4559
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
14 months agoAvoid dereferencing NULL pointer. 50/4550/3
Darius Rad [Tue, 22 May 2018 20:38:57 +0000 (16:38 -0400)]
Avoid dereferencing NULL pointer.

If a NULL pointer is passed, don't attempt to increment it.  This avoids
passing the now not-NULL pointer on and eventually segfaulting.  Also
remove some unnecessary temporary variables.

Change-Id: I268e225121aa283d59179bfae407ebf6959d3a4e
Signed-off-by: Darius Rad <darius@bluespec.com>
Reviewed-on: http://openocd.zylin.com/4550
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
14 months agoarmv7a: read ttbcr and ttb0/1 at every entry in debug state 01/4601/2
Antonio Borneo [Thu, 12 Jul 2018 14:15:45 +0000 (16:15 +0200)]
armv7a: read ttbcr and ttb0/1 at every entry in debug state

Commit bfc5c764df145f68835543119865eabe462e19c2 avoids reading
ttbcr and ttb0/1 at every virt2phys translation by caching them,
and it updates the cached values in armv7a_arch_state().
But the purpose of any (*arch_state)() method, thus including
armv7a_arch_state(), is to only print out and inform the user
about some architecture specific status.
Moreover, to reduce the verbosity during a GDB session, the
method (*arch_state)() is not executed anymore at debug state
entry (check use of target->verbose_halt_msg in src/openocd.c),
thus the state of translation table gets out-of-sync triggering
Error: Address translation failure
or even using a wrong address in the memory R/W operation.

In addition, the commit above breaks the case of armv7r by
calling armv7a_read_ttbcr() unconditionally.

Fixed by moving in cortex_a_post_debug_entry() the call to
armv7a_read_ttbcr() on armv7a case only.
Remove the call to armv7a_read_ttbcr() in armv7a_identify_cache()
since it is (conditionally) called only in the same procedure
cortex_a_post_debug_entry().

Fixes: bfc5c764df14 ("armv7a: cache ttbcr and ttb0/1 on debug
state entry")
Change-Id: Ifc20eca190111832e339a01b7f85d28c1547c8ba
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4601
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
14 months agoserver: Improve signal handling under Linux 63/3963/7
Brent Roman [Thu, 2 Feb 2017 04:49:18 +0000 (20:49 -0800)]
server: Improve signal handling under Linux

Commit 5087a955 added custom signal handlers for the openocd
server process.

Before this commit, when openocd is run as a background process
having the same controlling terminal as gdb, Control-C would be
handled by gdb to stop target execution and return to the gdb prompt.

However, after commit 5087a955, the SIGINT caused by pressing
Control-C also terminates openocd, effectively crashing the
debugging session.  The only way to avoid this is run openocd in
a different controling terminal or to detach openocd from its
controlling terminal,
thus losing all job control for the openocd process.

This patch improves the server's handling of POSIX signals:
1) Keyboard generated signals (INT and QUIT) are ignored
   when server process has is no controlling terminal.
2) SIGHUP and SIGPIPE are handled to ensure that .quit functions
   for each interface are called if user's logs out of X
   session or there is a network failure.

SIG_INT & SIG_QUIT still stop openocd
when it is running in the foreground.

Change-Id: I03ad645e62408fdaf4edc49a3550b89b287eda10
Signed-off-by: Brent Roman <genosensor@gmail.com>
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/3963
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
14 months agotarget/aarch64: Call aarch64_init_debug_access() earlier in aarch64_deassert_reset() 07/4607/2
Dennis Ostermann [Wed, 18 Jul 2018 09:21:17 +0000 (11:21 +0200)]
target/aarch64: Call aarch64_init_debug_access() earlier in aarch64_deassert_reset()

On Renesas R-Car, calling 'reset halt' and 'reset init' always made DAP inaccessible. Calling 'reset' and 'halt' seperatly worked fine.
The only differences seems to be the point in time when aarch64_init_debug_access() is called. This patch aligns the behaviour.

Change-Id: I2296c65e48414a7d9846f12a395e5eca315b49ca
Signed-off-by: Dennis Ostermann <dennis.ostermann@renesas.com>
Reviewed-on: http://openocd.zylin.com/4607
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
14 months agotarget/armv7m_trace: Use prefix for enums 05/3905/3
Marc Schink [Sat, 10 Dec 2016 11:59:27 +0000 (12:59 +0100)]
target/armv7m_trace: Use prefix for enums

Change-Id: I3f199e6053146a1094d96b98ea174b41bb021599
Signed-off-by: Marc Schink <openocd-dev@marcschink.de>
Reviewed-on: http://openocd.zylin.com/3905
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
14 months agotarget/armv7m_trace: Fix typo in enum 04/3904/3
Marc Schink [Sat, 10 Dec 2016 11:48:44 +0000 (12:48 +0100)]
target/armv7m_trace: Fix typo in enum

Change-Id: I6364ee5011ef2d55c59674e3b97504a285de0cb2
Signed-off-by: Marc Schink <openocd-dev@marcschink.de>
Reviewed-on: http://openocd.zylin.com/3904
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
14 months agotarget: Fix segfault for 'mem2array' 34/4534/3
Marc Schink [Wed, 4 Apr 2018 07:50:40 +0000 (09:50 +0200)]
target: Fix segfault for 'mem2array'

Call 'mem2array' without arguments to reproduce the segmentation
fault.

Change-Id: I02bf46cc8bd317abbb721a8c75d7cbfac99eb34e
Signed-off-by: Marc Schink <openocd-dev@marcschink.de>
Reviewed-on: http://openocd.zylin.com/4534
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Christopher Head <chead@zaber.com>
14 months agonrf5: Add HWID 0x139 (52832 rev E0) 04/4604/2
James Jacobsson [Mon, 16 Jul 2018 08:27:03 +0000 (10:27 +0200)]
nrf5: Add HWID 0x139 (52832 rev E0)

Change-Id: I71b7471ccfcb8fcc6de30da57ce4165c7fb1f73f
Signed-off-by: James Jacobsson <slowcoder@gmail.com>
Reviewed-on: http://openocd.zylin.com/4604
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
14 months agoAvoid null target->semihosting references. 03/4603/2
Liviu Ionescu [Sun, 15 Jul 2018 06:45:13 +0000 (09:45 +0300)]
Avoid null target->semihosting references.

The new common semihosting code introduced a bug,
in certain conditions target->semihosting was
used without semihosting being initialised.

The solution was to explicitly test for
target->semihosting before dereferencing it.

Change-Id: I4c83e596140c68fe4ab32e586e51f7e981a40798
Signed-off-by: Liviu Ionescu <ilg@livius.net>
Reviewed-on: http://openocd.zylin.com/4603
Tested-by: jenkins
Reviewed-by: Jonathan Larmour <jifl@eCosCentric.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
14 months agoflash/nor/stm32lx: Add revision 'V' for STM32L1xx Cat.3 devices 00/4600/2
Marc Schink [Mon, 2 Jul 2018 17:44:45 +0000 (19:44 +0200)]
flash/nor/stm32lx: Add revision 'V' for STM32L1xx Cat.3 devices

Change-Id: Ic92b0fb5b738af3bec79ae335876aa9e26f5f4cd
Signed-off-by: Marc Schink <openocd-dev@marcschink.de>
Reviewed-on: http://openocd.zylin.com/4600
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
14 months agoflash/nor/at91sam4: fix sam4sa16c flash banks and its gpnvms count 99/4599/3
Erwin Oegema [Fri, 13 Jul 2018 13:50:40 +0000 (15:50 +0200)]
flash/nor/at91sam4: fix sam4sa16c flash banks and its gpnvms count

There was already a github fork that had this fixed, but as we try
to use the latest, non-modified version of all software we use,
I would like to have this fix in the next releases of OpenOCD so
that if people uses $packagemanager, they will not have issues flashing
the last part of the flash of sam4sa16c chips.

Additionally, I've added some more logging related to the flash
bank that was used, and the chip ID that was detected.

Change-Id: I7ea5970105906e4560b727e46222ae9a91e41559
Signed-off-by: Erwin Oegema <blablaechthema@hotmail.com>
Reviewed-on: http://openocd.zylin.com/4599
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
14 months agoflash/nor: add support for TI MSP432 devices 53/4153/10
Edward Fewell [Sat, 3 Jun 2017 02:20:26 +0000 (21:20 -0500)]
flash/nor: add support for TI MSP432 devices

Added msp432 flash driver to support the TI MSP432P4x and
MSP432E4x microcontrollers. Implemented the flash algo
helper as used in the TI debug and flash tools. This
implemention supports the MSP432E4, Falcon, and Falcon 2M
variants. The flash driver automatically detects the
connected variant and configures itself appropriately.
Added command to mass erase device for consistency with
TI tools and added command to unlock the protected BSL
region.

Tested using MSP432E401Y, MSP432P401R, and MSP432P4111
LaunchPads.
Tested with embedded XDS110 debug probe in CMSIS-DAP
mode and with external SEGGER J-Link probe.

Removed ti_msp432p4xx.cfg file made obsolete by this
patch.
Change-Id: I3b29d39ccc492524ef2c4a1733f7f9942c2684c0
Signed-off-by: Edward Fewell <efewell@ti.com>
Reviewed-on: http://openocd.zylin.com/4153
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
14 months agodrivers: cmsis-dap: Print version info when available 04/3404/3
Karl Palsson [Wed, 13 Apr 2016 23:44:14 +0000 (23:44 +0000)]
drivers: cmsis-dap: Print version info when available

No need to wait until after connecting, might help diagnose part information by
printing earlier.

Change-Id: I51eb0d584be306baa811fbeb1ad6a604773e602c
Signed-off-by: Karl Palsson <karlp@tweak.net.au>
Reviewed-on: http://openocd.zylin.com/3404
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
14 months agodrivers: cmsis-dap: pull up common connect code 03/3403/3
Karl Palsson [Wed, 13 Apr 2016 23:42:48 +0000 (23:42 +0000)]
drivers: cmsis-dap: pull up common connect code

Just a minor deduplication

Change-Id: Idd256883e5f6d4bd4dcc18462dd5468991f507b3
Signed-off-by: Karl Palsson <karlp@tweak.net.au>
Reviewed-on: http://openocd.zylin.com/3403
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
14 months agoflash/nor/tcl: Distinguish between sectors and blocks in status messages 73/4573/9
Dominik Peklo [Sun, 24 Jun 2018 02:35:53 +0000 (12:35 +1000)]
flash/nor/tcl: Distinguish between sectors and blocks in status messages

Use the right word in flash protect command status messages based on
whether the target bank defines num_prot_blocks. Minor message style
tidy-up.

Change-Id: I5f40fb5627422536ce737f242fbf80feafe7a1fc
Signed-off-by: Dominik Peklo <dom.peklo@gmail.com>
Reviewed-on: http://openocd.zylin.com/4573
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Christopher Head <chead@zaber.com>
14 months agonds32: Avoid detected JTAG clock 92/4292/6
Hellosun Wu [Wed, 8 Nov 2017 09:04:11 +0000 (17:04 +0800)]
nds32: Avoid detected JTAG clock

AICE2 doesn't support scan for the maximum clock frequency of
JTAG chain. It will cause USB command timeout.

Change-Id: I41d1e3be387b6ed5a4dd0be663385a5f053fbcf9
Signed-off-by: Hellosun Wu <wujiheng.tw@gmail.com>
Reviewed-on: http://openocd.zylin.com/4292
Tested-by: jenkins
Reviewed-by: Hsiangkai Wang <hsiangkai@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
14 months agoAdds SAMD11D14AU flash support. 97/4597/2
Christopher Hoover [Tue, 10 Jul 2018 09:35:02 +0000 (02:35 -0700)]
Adds SAMD11D14AU flash support.

Corrects names of SAMD11D14AM and SAMD11D14ASS per datasheet.

Change-Id: I8beb15d5376966a4f8d7de76bfb2cbda2db440dc
Signed-off-by: Christopher Hoover <ch@murgatroid.com>
Reviewed-on: http://openocd.zylin.com/4597
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
14 months agotcl/board: add SAMD11 Xplained Pro evaluation board 07/4507/2
Peter Lawrence [Sat, 28 Apr 2018 22:49:13 +0000 (17:49 -0500)]
tcl/board: add SAMD11 Xplained Pro evaluation board

Change-Id: Id996c4de6dc9f25f71424017bf07689fea7bd3af
Signed-off-by: Peter Lawrence <majbthrd@gmail.com>
Reviewed-on: http://openocd.zylin.com/4507
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
14 months agotarget: atmel samd10 xplained mini 02/3402/3
Karl Palsson [Wed, 13 Apr 2016 23:35:32 +0000 (23:35 +0000)]
target: atmel samd10 xplained mini

cortex m0+ on a tiny board, with an mEDBG (CMSIS-DAP) debug interface.

Change-Id: Iaedfab578b4eb4aa2d923bd80f220f59b34e6ef9
Signed-off-by: Karl Palsson <karlp@tweak.net.au>
Reviewed-on: http://openocd.zylin.com/3402
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
14 months agopsoc5lp: fix erase check, add free_driver_priv 69/4569/3
Tomas Vanek [Fri, 22 Jun 2018 08:09:53 +0000 (10:09 +0200)]
psoc5lp: fix erase check, add free_driver_priv

psoc5lp_erase_check() was not properly adapted to the new
armv7m_blank_check_memory() in the hot fix 53376dbbede4f0bf42e724ff
This change fixes handling of num_sectors in dependecy of ecc_enabled.
Also add comments how ecc_enabled influences num_sectors.

Add pointer to default_flash_free_driver_priv() to all psoc5lp flash
drivers to keep valgrind happy.

Change-Id: Ie1806538becd364fe0efb7a414f0fe6a84b2055b
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/4569
Tested-by: jenkins
15 months agotarget/stm32f7x: Clear stuck HSE clock with CSS 70/4570/3
Christopher Head [Mon, 30 Apr 2018 17:28:21 +0000 (10:28 -0700)]
target/stm32f7x: Clear stuck HSE clock with CSS

Change-Id: Ica0025ea465910dd664ab546b66f4f25b271f1f5
Signed-off-by: Christopher Head <chead@zaber.com>
Reviewed-on: http://openocd.zylin.com/4570
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
15 months agotarget/image: make i/j unsigned to avoid ubsan runtime error 84/4584/3
Cody Schafer [Mon, 2 Jul 2018 19:56:53 +0000 (15:56 -0400)]
target/image: make i/j unsigned to avoid ubsan runtime error

src/target/image.c:1055:15: runtime error: left shift of 128 by 24 places cannot be represented in type 'int'

Change-Id: I322fd391cf3f242beffc8a274824763c8c5e69a4
Signed-off-by: Cody Schafer <openocd@codyps.com>
Reviewed-on: http://openocd.zylin.com/4584
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Christopher Head <chead@zaber.com>
15 months agogdb_server: set current_target from connection's one 86/4586/2
Antonio Borneo [Mon, 2 Jul 2018 16:47:34 +0000 (18:47 +0200)]
gdb_server: set current_target from connection's one

In a multi-target environment we are supposed to have a single
gdb server for each target (or for each group of targets within
a SMP node).
By default, the gdb attached to a server sends its command to
the target (or to the SMP node targets) linked to that server.

This is working fine for the normal gdb commands, but it is
broken for the native OpenOCD commands executed through gdb
"monitor" command. In the latter case, gdb "monitor" commands
will be executed on the current target of OpenOCD configuration
script (that is either the last target created or the target
specified in a "targets" command).

Fixed in gdb_new_connection() by replacing the current target
in the connection's copy of command context.

Change-Id: If7c8f2dce4a3138f0907d3000dd0b15e670cfa80
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4586
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Christopher Head <chead@zaber.com>
15 months agogdb_server: only trigger once the event gdb-detach at gdb quit 85/4585/2
Antonio Borneo [Mon, 25 Jun 2018 13:09:31 +0000 (15:09 +0200)]
gdb_server: only trigger once the event gdb-detach at gdb quit

When GDB quits (e.g. with "quit" command) we first execute
gdb_detach() to reply "OK" then, at GDB disconnect (either TCP
or pipe connection type), we execute gdb_connection_closed().
In case GDB is killed or it crashes, OpenOCD only executes the
latter when detects the disconnection.
Both gdb_detach() and gdb_connection_closed() trigger the event
TARGET_EVENT_GDB_DETACH thus getting it triggered twice on clean
GDB quit.

Do not trigger the event TARGET_EVENT_GDB_DETACH in gdb_detach()
and let only gdb_connection_closed() to handle it.

Change-Id: Iacf035c855b8b3e2239c1c0e259c279688b418ee
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4585
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
15 months agotcl: board: Add NXP Freedom FRDM-LS1012A config 95/4595/2
Andreas Färber [Sun, 8 Jul 2018 22:37:51 +0000 (00:37 +0200)]
tcl: board: Add NXP Freedom FRDM-LS1012A config

An update for the K20 CMSIS-DAP firmware can be found here:
https://community.nxp.com/thread/387080?commentID=840141#comment-840141

Change-Id: I149d7f8610aa56daf1aeb95f14ee1bf88f7cb647
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/4595
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
15 months agotcl: target: Add NXP LS1012A config 94/4594/2
Andreas Färber [Sun, 8 Jul 2018 22:32:54 +0000 (00:32 +0200)]
tcl: target: Add NXP LS1012A config

As seen on the FRDM-LS1012A board.

Change-Id: Ifc9074b3f7535167b9ded5f544501ec2879f5db7
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/4594
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
15 months agotarget: armv8: Avoid semihosting segfault on halt 93/4593/2
Andreas Färber [Sun, 8 Jul 2018 17:52:06 +0000 (19:52 +0200)]
target: armv8: Avoid semihosting segfault on halt

Avoid a NULL pointer dereference when halting an aarch64 core.

Change-Id: I333d40475ab26e2f0dca5c27302a5fa4d817a12f
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/4593
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
15 months agoGDB fileIO stdout support 38/4538/5
Omair Javaid [Thu, 31 May 2018 00:26:49 +0000 (05:26 +0500)]
GDB fileIO stdout support

This patch fixes gdb fileio support to allow gdb console to be used as stdout.

Now we can do something like
gdb <inferior file>

(gdb) tar ext :3333
(gdb) load
(gdb) monitor arm semihosting enable
(gdb) monitor arm semihosting_fileio enable
(gdb) continue

Here: Output from inferior using puts, printf etc will be routed to gdb console.

Change-Id: I9cb0dddda1de58038c84f5b035c38229828cd744
Signed-off-by: Omair Javaid <omair.javaid@linaro.org>
Reviewed-on: http://openocd.zylin.com/4538
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
15 months agoAdd ARM v8 AArch64 semihosting support 37/4537/5
Omair Javaid [Wed, 23 May 2018 12:43:47 +0000 (17:43 +0500)]
Add ARM v8 AArch64 semihosting support

This patch implements semihosting support for AArch64. This picks
code from previously submitted AArch64 semihosting support patch
and rebases on top of reworked semihosting code. Tested in AArch64
mode on a Lemaker Hikey Board with NewLib and GDB.

Change-Id: I228a38f1de24f79e49ba99d8514d822a28c2950b
Signed-off-by: Omair Javaid <omair.javaid@linaro.org>
Reviewed-on: http://openocd.zylin.com/4537
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
15 months agotarget: fix 'bp' command help message 11/4511/2
Antonio Borneo [Thu, 22 Jan 2015 15:12:46 +0000 (23:12 +0800)]
target: fix 'bp' command help message

"asid" and "length" are separate arguments of the command.
Put space between them.

Change-Id: I36cfc1e3a01caafef4fc3b26972a0cc192b0b963
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4511
Tested-by: jenkins
Reviewed-by: Christopher Head <chead@zaber.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
15 months agoflash/nor/stm32h7: Fix incorrect comment 21/4521/2
Christopher Head [Mon, 14 May 2018 20:08:24 +0000 (13:08 -0700)]
flash/nor/stm32h7: Fix incorrect comment

The name of the bit according to the reference manual is inconsistency
error, not increment error.

Change-Id: Ie3b73c0312db586e35519e03fd1a5cb225673d97
Signed-off-by: Christopher Head <chead@zaber.com>
Reviewed-on: http://openocd.zylin.com/4521
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
15 months agoflash/nor/stm32: Eliminate working area leak 20/4520/2
Christopher Head [Mon, 14 May 2018 20:06:39 +0000 (13:06 -0700)]
flash/nor/stm32: Eliminate working area leak

On a specific early-return path, an allocated working area was not
freed. Free it.

Change-Id: I7c8fe51ff475f191624086996be1c77251780b77
Signed-off-by: Christopher Head <chead@zaber.com>
Reviewed-on: http://openocd.zylin.com/4520
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
15 months agoflash/nor/stm32: Report errors in wait_status_busy 19/4519/3
Christopher Head [Mon, 14 May 2018 18:56:56 +0000 (11:56 -0700)]
flash/nor/stm32: Report errors in wait_status_busy

Flash operation errors that occur during algorithm programming are
reported via the algorithm return value. However, Flash operation
errors that occur during non-algorithm work (erasing, programming
without a work area, programming the last non-multiple-of-32-bytes on
an H7, etc.) generally end with a call to stm32x_wait_status_busy,
which reads the status register and clears the error flags but fails
to actually report that something went wrong should an error flag
(other than WRPERR) be set. Return an error status from
stm32x_wait_status_busy in those cases. Correct a log message
accordingly.

Change-Id: I09369ea5f924fe58833aec1f45e52320ab4aaf43
Signed-off-by: Christopher Head <chead@zaber.com>
Reviewed-on: http://openocd.zylin.com/4519
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
15 months agotarget/cortex_m: return error if breakpoint address is out of range 35/4535/3
Antonio Borneo [Tue, 29 May 2018 21:40:36 +0000 (23:40 +0200)]
target/cortex_m: return error if breakpoint address is out of range

If the "Flash Patch and Breakpoint" unit is rev.1 then it can only
accept breakpoint addresses below 0x1FFFFFFF.
Detailed info in "ARM v7-M Architecture Reference Manual", DDI0403E
at chapter "C1.11 Flash Patch and Breakpoint unit".

Print a message and return error if the address of hardware
breakpoint cannot be handled by the breakpoint unit.

Change-Id: I95c92b1f058f0dfc568bf03015f99e439b27c59b
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4535
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Christopher Head <chead@zaber.com>
15 months agojtag/drivers/cmsis-dap: fix connect in cmsis_dap_swd_switch_seq() 71/4571/2
Antonio Borneo [Sat, 23 Jun 2018 13:12:46 +0000 (15:12 +0200)]
jtag/drivers/cmsis-dap: fix connect in cmsis_dap_swd_switch_seq()

The proc cmsis_dap_swd_switch_seq() is part of the SWD API for
this interface driver. It is valid only when the interface is
used in SWD mode.
In this proc there is the need to call, in sequence, first
cmsis_dap_cmd_DAP_Disconnect() then cmsis_dap_cmd_DAP_Connect().
The latter call requires the connection mode as parameter, that
inside cmsis_dap_swd_switch_seq() can only be CONNECT_SWD.

The current implementation is not correct and in some cases can
pass mode CONNECT_JTAG. Moreover, JTAG is optional in CMSIS-DAP
and passing mode CONNECT_JTAG triggers an error with SWD-only
interfaces.

Use mode CONNECT_SWD in SWD specific cmsis_dap_swd_switch_seq().

Change-Id: Ib455bf5b69cb2a2d146a6c8875387b00c27a5690
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4571
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
15 months agotcl/board: Factor out common R-Car Gen2 code 33/4533/3
Marek Vasut [Wed, 23 May 2018 13:10:12 +0000 (15:10 +0200)]
tcl/board: Factor out common R-Car Gen2 code

Factor out the code shared by all R-Car Gen2 boards into a single
file to get rid of the duplication.

Change-Id: I70b302c2e71f4e6fdccb2817dd65a5493bb393d8
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Reviewed-on: http://openocd.zylin.com/4533
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
15 months agotcl/board: Add Renesas R-Car R8A7794 E2 Silk board 32/4532/2
Marek Vasut [Sat, 21 Apr 2018 13:59:23 +0000 (15:59 +0200)]
tcl/board: Add Renesas R-Car R8A7794 E2 Silk board

Add configuration for the Renesas R-Car R8A7794 E2
based Silk evaluation board.

Change-Id: I504b5630b1a2791ed6967c6c2af8851ceef9723f
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
---
NOTE: This requires SW7[1] in position 1 (default is 0)
Reviewed-on: http://openocd.zylin.com/4532
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
15 months agotcl/board: Add Renesas R-Car R8A7791 M2W Porter board 98/4498/3
Marek Vasut [Mon, 16 Apr 2018 19:20:27 +0000 (21:20 +0200)]
tcl/board: Add Renesas R-Car R8A7791 M2W Porter board

Add configuration for the Renesas R-Car R8A7791 M2W
based Porter evaluation board.

Change-Id: Iaadb18f29748f890ebb68519ea9ddbd18e7649af
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Reviewed-on: http://openocd.zylin.com/4498
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
15 months agotcl/board: Add Renesas R-Car R8A7790 H2 Stout board 97/4497/3
Marek Vasut [Mon, 16 Apr 2018 19:22:04 +0000 (21:22 +0200)]
tcl/board: Add Renesas R-Car R8A7790 H2 Stout board

Add configuration for the Renesas R-Car R8A7790 H2
based Stout ADAS board.

Change-Id: Ib880b5d2e1fab5c8c0bc0dbcedcdce8055463fe2
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Reviewed-on: http://openocd.zylin.com/4497
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
15 months agotcl/target: Add Renesas R-Car R8A7794 E2 target 31/4531/2
Marek Vasut [Sat, 21 Apr 2018 13:59:17 +0000 (15:59 +0200)]
tcl/target: Add Renesas R-Car R8A7794 E2 target

Add configuration for the Renesas R-Car R8A7794 E2 target.
This is an SoC with two Cortex A7 ARMv7a cores, both A7
cores are supported.

Change-Id: Ic1c81840e3bfcef8ee1de5acedffae5c83612a5e
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Reviewed-on: http://openocd.zylin.com/4531
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
15 months agotarget/arm_adi_v5: keep CSW and TAR cache updated 64/4564/2
Antonio Borneo [Fri, 15 Jun 2018 14:37:18 +0000 (16:37 +0200)]
target/arm_adi_v5: keep CSW and TAR cache updated

The call to dap_queue_ap_write() can fail and the value in CSW and
TAR becomes unknown.

Invalidate the OpenOCD cache if dap_queue_ap_write() fails.

Change-Id: Id6ec370b4c5ad07e454464780c1a1c8ae34ac870
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4564
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
15 months agotarget/arm_adi_v5: sync CSW and TAR cache on apreg write 65/4565/3
Antonio Borneo [Fri, 15 Jun 2018 14:30:41 +0000 (16:30 +0200)]
target/arm_adi_v5: sync CSW and TAR cache on apreg write

When using apreg to change AP registers CSW or TAR we get internal
cached value not valid anymore.

Reuse the setup functions for CSW and TAR to write them.
Invalidate the cached value before the call to force the write, thus
keeping original apreg behaviour.

Change-Id: Ib14fafd5e584345de94f2e983de55406c588ac1c
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4565
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
15 months agomips_m4k.c: Fix build with --disable-target64 66/4566/2
Liviu Ionescu [Wed, 20 Jun 2018 09:30:33 +0000 (12:30 +0300)]
mips_m4k.c: Fix build with --disable-target64

Replace PRIx64 with TARGET_PRIxADDR to avoid build problems
when --disable-target64 is used during configure.

Change-Id: I054a27a491e86c42c9386a0488194320b808ba96
Signed-off-by: Liviu Ionescu <ilg@livius.net>
Reviewed-on: http://openocd.zylin.com/4566
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Tim Newsome <tim@sifive.com>
15 months agotarget/arm: Add PLD command to ARM disassembler. 48/4348/4
James Marshall [Wed, 17 Jan 2018 02:08:16 +0000 (21:08 -0500)]
target/arm: Add PLD command to ARM disassembler.

Updates the ARM disassembler to handle PLD (PreLoad Data) commands.
Previously handled by printing a TODO message. There are three forms of
the command: literal, register, and immediate. Simply decode based off
of the A1 encoding for the instructions in the ARM ARM. Also fixes mask
to handle PLDW commands.

Change-Id: I63bf97f16af254e838462c7cfac80f6c4681c556
Signed-off-by: James Marshall <jcmarsh@gwmail.gwu.edu>
Reviewed-on: http://openocd.zylin.com/4348
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
16 months agoflash/nor/psoc5lp: fix compile issue on GCC 8.1.0 63/4563/2
Antonio Borneo [Mon, 11 Jun 2018 08:29:52 +0000 (10:29 +0200)]
flash/nor/psoc5lp: fix compile issue on GCC 8.1.0

Issue already identified by Alex https://sourceforge.net/u/alexbour/
in ticket #191 https://sourceforge.net/p/openocd/tickets/191/

src/flash/nor/psoc5lp.c:237:2: error: ‘strncpy’ output
truncated before terminating nul copying 2 bytes from a
string of the same length [-Werror=stringop-truncation]

Fix it by assigning the value to the array elements.

Change-Id: I22468e5700efa64ea48ae8cdec930c48b4a7d8fb
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4563
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
16 months agotcl/target/stm32f7x: configure faster system clock in reset-init 64/4464/6
Tomas Vanek [Mon, 12 Mar 2018 22:42:23 +0000 (23:42 +0100)]
tcl/target/stm32f7x: configure faster system clock in reset-init

STM32F7xx devices need faster clock for flash programming
over JTAG transport. Using reset default 16 MHz clock
resulted in lot of DAP WAITs and substantial decrease
of flashing performance.

Adapted to the restructured dap support
(see 2231da8ec4e7d7ae9b652f3dd1a7104f5a110f3f).

Change-Id: Ida6915331dd924c9c0d08822fd94c04ad408cdc5
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/4464
Tested-by: jenkins
Reviewed-by: Christopher Head <chead@zaber.com>
16 months agosrc/flash/tms470: remove testing of sectors[].is_erased state 01/4401/4
Tomas Vanek [Fri, 9 Feb 2018 16:51:27 +0000 (17:51 +0100)]
src/flash/tms470: remove testing of sectors[].is_erased state

The erase check routine checked sectors only if is_erased != 1

Check sector unconditionally.

While on it fix clang static analyzer warnings.

Change-Id: I9988615fd8530c55a9b0c54b1900f89b550345e9
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/4401
Tested-by: jenkins
16 months agoflash/nor/nrf5: remove is_erased setting and autoerase before write 00/4400/3
Tomas Vanek [Fri, 9 Feb 2018 16:24:05 +0000 (17:24 +0100)]
flash/nor/nrf5: remove is_erased setting and autoerase before write

Cached flash erase state in sectors[].is_erased is not reliable as running
target can change the flash.

Autoerase was issued before flash write on condition is_erased != 1
Remove autoerase completely as it is a quite non-standard feature.

Change-Id: I19bef459e6afdc4c5fcaa2ccd194cf05be8a42b6
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/4400
Tested-by: jenkins
16 months agoflash/nor: Add support for TI CC26xx/CC13xx flash 58/4358/6
Edward Fewell [Fri, 19 Jan 2018 02:48:11 +0000 (20:48 -0600)]
flash/nor: Add support for TI CC26xx/CC13xx flash

Added cc26xx flash driver to support the TI CC26xx and CC13xx
microcontrollers. Driver is capable of determining which MCU
is connected and configures itself accordingly. Added config
files for four specific variants: CC26x0, CC13x0, CC26x2, and
CC13x2.

Note that the flash loader code is based on the sources used
to support flash in Code Composer Studio and Uniflash from TI.

Removed cc26xx.cfg file made obsolete by this patch.

Change-Id: Ie2b0f74f8af7517a9184704b839677d1c9787862
Signed-off-by: Edward Fewell <efewell@ti.com>
Reviewed-on: http://openocd.zylin.com/4358
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Fredrik Hederstierna <fredrik@hederstierna.com>
16 months agopsoc5lp: Add NV Latch flash driver 34/3434/22
Andreas Färber [Tue, 3 May 2016 21:47:54 +0000 (23:47 +0200)]
psoc5lp: Add NV Latch flash driver

Erasing is not supported by the hardware, it can be written directly.

Tested on CY8CKIT-059, except modifying-write.

Change-Id: I6e920ed930dcd5c7f0b10c5b1b4791a828d9080a
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/3434
Tested-by: jenkins
16 months agoflash/nor/psoc5lp: fix bad commit 2d5f2ede55150235352773a976166c3ab68297bc 57/4557/3
Tomas Vanek [Wed, 6 Jun 2018 15:53:32 +0000 (17:53 +0200)]
flash/nor/psoc5lp: fix bad commit 2d5f2ede55150235352773a976166c3ab68297bc

Change #3432 was merged into git master without adapting it
to #4297 "prepare infrastructure for multi-block blank check".
This is a fast fix of PSoC5LP specific blank check.
Not tested on real PSoC5LP device.

Change-Id: I7dc13ee7bd1f07b2bfe5a93a5030c0c482d30f00
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/4557
Tested-by: jenkins
16 months agodrivers: xds110: Remove unnecessary and deprecated libusb function. 53/4553/2
Edward Fewell [Tue, 5 Jun 2018 16:17:40 +0000 (11:17 -0500)]
drivers: xds110: Remove unnecessary and deprecated libusb function.

libusb-1.0.22 has deprecated the libusb_set_debug function. This
function was present in the XDS110 driver as an artifact left over
from early debugging. It isn't required because logging is disabled
by default. Removing it to simplify the code and no longer need to
have libusb version specific #if's in the code.

Change-Id: I9c3f16c039da3f3fad9c4a1169978b0d85a1b45c
Signed-off-by: Edward Fewell <efewell@ti.com>
Reviewed-on: http://openocd.zylin.com/4553
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
16 months agopsoc5lp: Add EEPROM flash driver 33/3433/19
Andreas Färber [Mon, 2 May 2016 23:47:54 +0000 (01:47 +0200)]
psoc5lp: Add EEPROM flash driver

Tested on CY8CKIT-059.

Change-Id: Ib02262e8eebf0df3d29492b8a7daa65b262da580
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/3433
Tested-by: jenkins
16 months agoflash/nor: Add PSoC 5LP flash driver 32/3432/27
Andreas Färber [Sat, 30 Apr 2016 13:10:05 +0000 (15:10 +0200)]
flash/nor: Add PSoC 5LP flash driver

Always probe for ECC mode and display ECC sectors if disabled.
Non-ECC write is implemented as zeroing the ECC/config bytes.
Erasing ECC sectors is ignored, erase-checking takes them into account.

Tested with CY8CKIT-059 (CY8C5888), except ECC mode.

Change-Id: If63b9ffca7ad8de038be3c086c49712b629ec554
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Signed-off-by: Forest Crossman <cyrozap@gmail.com>
Reviewed-on: http://openocd.zylin.com/3432
Tested-by: jenkins
16 months agoflash/nor: Add support for TI CC3220SF internal flash 19/4319/9
Edward Fewell [Thu, 28 Dec 2017 23:38:21 +0000 (17:38 -0600)]
flash/nor: Add support for TI CC3220SF internal flash

Added cc3220sf flash driver to support the TI CC3220SF
microcontrollers. Implemented flash driver to support the
internal flash of the CC3220SF. The implementation does not
support the serial flash of the CC32xx family that requires
connection over UART, and not via JTAG/SWD debug. Added config
files for both CC32xx devices (no flash) and CC3220SF (with
flash).

Updated to implement comments from code review.
Additional updates to handle remaining comments from review.
Additional updates per review.

Added code to only request aligned writes and full 32-bit
words down to flash helper algorithm. Updated for recent
changes in OpenOCD flash code.

Removed cc32xx.cfg file made obsolete by this patch.
Change-Id: I58fc1478d07238d39c7ef02339f1097a91668c47
Signed-off-by: Edward Fewell <efewell@ti.com>
Reviewed-on: http://openocd.zylin.com/4319
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
16 months agoFix Semihosting FileIO for targets using vcont packet 39/4539/3
Omair Javaid [Thu, 31 May 2018 00:36:53 +0000 (05:36 +0500)]
Fix Semihosting FileIO for targets using vcont packet

This patch fixes a bug where target fails to resume after completing GDB FileIO.
We need to update target last run control information to decide resumption. This
was not being done for vcont packets.

Change-Id: I44bea31720f8b877dba97d77a202303d546ea5bd
Signed-off-by: Omair Javaid <omair.javaid@linaro.org>
Reviewed-on: http://openocd.zylin.com/4539
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
16 months agotarget/target.c: free semihosting member 52/4552/2
Liviu Ionescu [Tue, 5 Jun 2018 14:34:47 +0000 (17:34 +0300)]
target/target.c: free semihosting member

When destroying the target, if the semihosting
pointer is set, free it.

Change-Id: I07d34918bb3fddab1eee11219dd66f4842708ec1
Signed-off-by: Liviu Ionescu <ilg@livius.net>
Reviewed-on: http://openocd.zylin.com/4552
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
16 months agoFix libusb-1.0.22 deprecated libusb_set_debug with libusb_set_option 40/4540/3
Khem Raj [Fri, 1 Jun 2018 04:06:46 +0000 (21:06 -0700)]
Fix libusb-1.0.22 deprecated libusb_set_debug with libusb_set_option

libusb_set_debug is deprecated in libusb >= 1.0.22 therefore replace
with equivalent libusb_set_option()  API

Change-Id: Ic0287a1bc0ccc90afe8e4c688085f0b25a7fb004
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Reviewed-on: http://openocd.zylin.com/4540
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
16 months agotarget/cortex_m: constify some variables 03/4503/2
Christopher Head [Fri, 27 Apr 2018 01:09:36 +0000 (18:09 -0700)]
target/cortex_m: constify some variables

Change-Id: I1f3fddd89597333fc1bb9535c0cd76ca3e008324
Signed-off-by: Christopher Head <chead@zaber.com>
Reviewed-on: http://openocd.zylin.com/4503
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
16 months agoflash/nor/virtual: copy missing fields from master flash_bank structure 05/4505/2
Bohdan Tymkiv [Fri, 27 Apr 2018 13:09:51 +0000 (16:09 +0300)]
flash/nor/virtual: copy missing fields from master flash_bank structure

Change-Id: I4ac71ad4b46ed613192310d85eb385b727649a11
Signed-off-by: Bohdan Tymkiv <bhdt@cypress.com>
Reviewed-on: http://openocd.zylin.com/4505
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
16 months agoflash/nor/core: fix double-free crash with 'virtual' flash banks 04/4504/2
Bohdan Tymkiv [Fri, 27 Apr 2018 12:37:28 +0000 (15:37 +0300)]
flash/nor/core: fix double-free crash with 'virtual' flash banks

flash_bank structure of 'virtual' flash driver is a full copy of
the master flash_bank structure including bank->sectors and
bank->prot_blocks pointers. These pointers point to memory
locations allocated by the master driver and thus master driver
is responsible for deallocating them.
Do not free bank->sectors and bank->prot_blocks of 'virtual'
driver since they were already released by master flash driver.

Change-Id: I01f373d4adb3fc79e2724964926b9276442c5c52
Signed-off-by: Bohdan Tymkiv <bhdt@cypress.com>
Reviewed-on: http://openocd.zylin.com/4504
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
16 months agobreakpoints: simplify the test to find a breakpoint 12/4512/2
Antonio Borneo [Thu, 22 Jan 2015 15:22:07 +0000 (23:22 +0800)]
breakpoints: simplify the test to find a breakpoint

The test is overly complicated and unreadable.
Simplify it while keeping the exact same behaviour.

Change-Id: I6b22291ca454e1eddeeab4024d3983dc4c603d3a
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4512
Tested-by: jenkins
Reviewed-by: Christopher Head <chead@zaber.com>
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
16 months agotarget: fix syntax in help message 36/4536/2
Antonio Borneo [Sun, 27 May 2018 15:37:38 +0000 (17:37 +0200)]
target: fix syntax in help message

The name of the command is already printed before the string
in ->usage, thus it appears twice.
E.g.
> help examine
  stm32f4x.cpu arp_examine arp_examine ['allow-defer']
        used internally for reset processing
  stm32f4x.cpu examine_deferred examine_deferred
        used internally for reset processing
  stm32f4x.cpu was_examined was_examined
        used internally for reset processing

Remove the command name from the string in ->usage.

Change-Id: If3b1368ffff8a94eb629ae3679e2e5f2f11ae92e
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4536
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
16 months agotarget: aarch64: Adding mcr, mrc 32-bit coprocesor read/write support 83/4483/4
Kamal Dasu [Fri, 23 Feb 2018 18:01:53 +0000 (13:01 -0500)]
target: aarch64: Adding mcr, mrc 32-bit coprocesor read/write support

Adding mrc and mcr support for 32-bit boot mode on aarch64 target.

Change-Id: I3879908253ccdf79509dcad752871f422526ec64
Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
Reviewed-on: http://openocd.zylin.com/4483
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
16 months agoRework/update ARM semihosting 18/4518/18
Liviu Ionescu [Sun, 13 May 2018 15:39:06 +0000 (18:39 +0300)]
Rework/update ARM semihosting

In 2016, ARM released the second edition of the semihosting specs
("Semihosting for AArch32 and AArch64"), adding support for 64-bits.

To ease the reuse of the semihosting logic for other platforms
(like RISC-V), the semihosting code was isolated from the ARM
target and updated to the latest specs.

The new code is already in use since January (in GNU MCU Eclipse
OpenOCD) and no problems were reported, neither for ARM nor for
RISC-V targets, after more than 7K downloads.

The 2 new files were formatted with uncrustify.

Change-Id: Ie84dbd86a547323bb8a5d24eab68fc7dad013d96
Signed-off-by: Liviu Ionescu <ilg@livius.net>
Reviewed-on: http://openocd.zylin.com/4518
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
16 months agojtag: drivers: sysfsgpio: lift upper gpio number limit 02/4502/3
Paul Fertser [Thu, 26 Apr 2018 16:21:30 +0000 (19:21 +0300)]
jtag: drivers: sysfsgpio: lift upper gpio number limit

Recent Linux maps GPIOs from 1023 downwards so do not limit the number
to 1000.

This should fix #183.

Change-Id: I6d4f493b670be9ed9b82759f0fb686a9faddbbf5
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/4502
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
16 months agojtag/drivers: Add support for TI XDS110 debug probe 22/4322/6
Edward Fewell [Tue, 2 Jan 2018 21:27:51 +0000 (15:27 -0600)]
jtag/drivers: Add support for TI XDS110 debug probe

Add support for the XDS110 debug probe using the APIs in the
probe's firmware. Includes support for older versions of the
firmware (with reduced performance) and support for a newer
version that includes OpenOCD specific APIs. Tested on various
TI LauchPads including MSP432P4, MSP432E4, CC2650, CC2652, and
CC3220SF.

Updated to add better support for swd switch. Removed issues found with
clang static analysis.

Updated to add rules entry for the XDS110 probe and Tiva DFU mode (which
affects both XDS110 and ICDI probes).

Change-Id: Ib274143111a68e67e80003797c6a68e3e80976b2
Signed-off-by: Edward Fewell <efewell@ti.com>
Reviewed-on: http://openocd.zylin.com/4322
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
16 months agoFix warnings exposed by GCC8 26/4526/3
Paul Fertser [Tue, 22 May 2018 09:04:31 +0000 (12:04 +0300)]
Fix warnings exposed by GCC8

gcc (GCC) 8.1.0 generates new warnings and thus fails the build.

The ARM disassembler warnings actually exposed a bug in SMALW, SMULW and
SMUL instructions decoding.

Reported by Eimers on IRC.

Change-Id: I200c70f75a9e07a1f13a592addc1c5fb37714440
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/4526
Tested-by: jenkins
Reviewed-by: Jiri Kastner <cz172638@gmail.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
16 months agoconfigure.ac: Fix required libjaylink version 50/4450/2
Marc Schink [Tue, 16 Jan 2018 08:24:27 +0000 (09:24 +0100)]
configure.ac: Fix required libjaylink version

Change-Id: I9ede86eeef8991db52ffa188ff293c14bd50a1f4
Signed-off-by: Marc Schink <openocd-dev@marcschink.de>
Reviewed-on: http://openocd.zylin.com/4450
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
17 months agodoc: fix several typos within manual documents 10/4510/2
Antonio Borneo [Sat, 10 Feb 2018 22:56:30 +0000 (23:56 +0100)]
doc: fix several typos within manual documents

Mostly trivial fixes spotted by spell checker

Change-Id: I3af693faf5506c866e2abe253a0e37aea3c4d284
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4510
Tested-by: jenkins
Reviewed-by: Christopher Head <chead@zaber.com>
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
17 months agoarm_dpm: flush both scratch registers (R0 and R1) 06/4506/2
Philipp Tomsich [Fri, 27 Apr 2018 17:59:56 +0000 (19:59 +0200)]
arm_dpm: flush both scratch registers (R0 and R1)

Neither the initial loop to clear dirty registers (which visits all
registers starting at R2 and counting upwards) nor the final explicit
flushes ensure a write-back in arm_dpm_write_dirty_registers.

This change makes sure that both our scratch registers (i.e. R0 and
R1) are written back to the target.

Change-Id: If65be4f371cd40af9a0cfa97f3730b070b92e981
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-on: http://openocd.zylin.com/4506
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
17 months agodoc: fix several typos in openocd.texi 02/4402/2
Antonio Borneo [Sat, 10 Feb 2018 14:08:26 +0000 (15:08 +0100)]
doc: fix several typos in openocd.texi

Mostly trivial fixes spotted by spell checker
One fix s/are/is/
No changes in the content of the document

Change-Id: Ic2d8696860c540e901e8c5190f8f1e7dce80545f
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4402
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
17 months agoChibiOS thread states: Update thread state to label mapping 88/4488/5
Faisal Shah [Tue, 10 Apr 2018 03:46:45 +0000 (22:46 -0500)]
ChibiOS thread states: Update thread state to label mapping

Fixed style issue.
Removed #define with list of strings, and just put the
strings in the array initialization directly.
Removed empty space at the start of line.

Change-Id: I76580be203d7d69b8c5b5440f820156543e0d5cc
Signed-off-by: Faisal Shah <faisal.shah@gmail.com>
Reviewed-on: http://openocd.zylin.com/4488
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>