Spencer Oliver [Mon, 17 Oct 2011 21:04:21 +0000 (22:04 +0100)]
luminary: add peripheral reset script
some luminary device classes require a reset script
to emulate a hardware reset.
Change-Id: Id505c92451244b48b0238c2130aebab2df8d208b
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/30
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
Tested-by: Øyvind Harboe <oyvindharboe@gmail.com>
Karl Kurbjun [Sun, 2 Oct 2011 17:41:33 +0000 (11:41 -0600)]
AM/DM37x: Use ICEPick warm reset and include halt when gdb connects.
Using the ICEPick reset seems to allow the processor to be halted sooner
and the halt on gdb connection makes the connect process more robust.
Change-Id: I0586f6e6becc60a729030509ef58907a19d545ec
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/23
Tested-by: Øyvind Harboe <oyvindharboe@gmail.com>
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
Karl Kurbjun [Sun, 2 Oct 2011 16:52:20 +0000 (10:52 -0600)]
ICEPick-C: Add support for warm reset through JTAG controller and provide finer detail functions.
This sets up simple functions that can later be used to provide additional
ICEPick Operations.
Change-Id: I313b8679267696fad87d23f3692963e513f2fe21
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/22
Tested-by: Øyvind Harboe <oyvindharboe@gmail.com>
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
Attila Kinali [Mon, 10 Oct 2011 13:09:22 +0000 (15:09 +0200)]
Add the SAM3N familly to the chip_details table
Change-Id: Ic122d324eacf6e667ed6008ebb84708be944222c
Signed-off-by: Attila Kinali <attila@kinali.ch>
Reviewed-on: http://openocd.zylin.com/29
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
Tested-by: Øyvind Harboe <oyvindharboe@gmail.com>
Øyvind Harboe [Fri, 14 Oct 2011 12:55:17 +0000 (14:55 +0200)]
target_request: add target_got_message() that can be used to improve DCC performance
API change to allow implementing a back-off algorithm for
polling hardware.
Change-Id: I6cbe8b4534c8dfeb8442305171ea96b5481c1f17
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/26
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
Tested-by: Øyvind Harboe <oyvindharboe@gmail.com>
Øyvind Harboe [Fri, 14 Oct 2011 13:05:45 +0000 (15:05 +0200)]
target: DCC / target message backoff algorithm
by immediately polling again when we have received a message from
the target instead of waiting 100ms, we can hope for much better
performance. More than 100x? :-)
Change-Id: Ieaf0c6c8b6e5addc482895670ffbf9a743e07a29
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/27
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
Tested-by: Øyvind Harboe <oyvindharboe@gmail.com>
Jim Norris [Fri, 14 Oct 2011 18:42:26 +0000 (13:42 -0500)]
Add some more detail for setting up Gerrit account.
1) Add a couple more steps when setting up the Gerrit account.
Change-Id: I5d81feac4650d4d28653d14cfc0baf14270424c1
Signed-off-by: Jim Norris <u17263@att.net>
Reviewed-on: http://openocd.zylin.com/28
Reviewed-by: Peter Stuge <peter@stuge.se>
Tested-by: Peter Stuge <peter@stuge.se>
Spencer Oliver [Fri, 14 Oct 2011 08:40:58 +0000 (09:40 +0100)]
arm-jtag-ew: whitespace cleanup
Change-Id: I8861e825f9c84525e0c09c3adaa3fe300640770d
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Reviewed-on: http://openocd.zylin.com/21
Tested-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Spencer Oliver [Fri, 14 Oct 2011 12:03:29 +0000 (13:03 +0100)]
flash: fix lpc2000 driver typo
Change-Id: I3a759ed98a27fd186c12355b846d5e97dba86c5b
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Uwe Hermann [Thu, 13 Oct 2011 22:21:06 +0000 (00:21 +0200)]
Add an interface file for DLP Design DLP-USB1232H.
The DLP Design DLP-USB1232H UART/SPI/JTAG module is based on an FTDI FT2232H
chip. Among other things, it can used as JTAG programmer if connected to
the JTAG target properly. I have successfully wired the module to an
Olimex STM32-H103 eval board and flashed a firmware onto that using OpenOCD.
The setup details and schematics are documented at:
http://randomprojects.org/wiki/DLP-USB1232H_and_OpenOCD_based_JTAG_adapter
Change-Id: I5eb9255a61eeece233009bee77d7dc3b5d1afb8b
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Reviewed-on: http://openocd.zylin.com/20
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Tested-by: Spencer Oliver <spen@spen-soft.co.uk>
Uwe Hermann [Thu, 13 Oct 2011 22:13:47 +0000 (00:13 +0200)]
Add a board file for the Glyn Tonga2.
This is a Toshiba TMPA900CMXBG (ARM9) based SO-DIMM CPU module with 64MB
DDR SDRAM, 256MB NAND flash, and on-board Ethernet.
The board file provides a tonga2_init function which sets up the
PLL/clocks and memory (SDRAM and SRAM), which allows writing a boot-loader
into RAM via JTAG.
Change-Id: I60522b97997bdf50e1f25aebab910d93a98522fb
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Reviewed-on: http://openocd.zylin.com/19
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Tested-by: Spencer Oliver <spen@spen-soft.co.uk>
Spencer Oliver [Thu, 13 Oct 2011 18:58:06 +0000 (19:58 +0100)]
target: whitespace cleanup
Change-Id: I1453f4f3dc0add529da20577e38b8b82d7d00366
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Reviewed-on: http://openocd.zylin.com/18
Reviewed-by: Alex Austin <alex.austin@spectrumdsi.com>
Tested-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Michel Jaouen [Mon, 3 Oct 2011 17:05:59 +0000 (19:05 +0200)]
breakpoint : smp software breakpoint issue
Change-Id: Iefe78bad71d4fdb38ae412ab8fe2f6282836c22e
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/14
Tested-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Peter Stuge [Wed, 12 Oct 2011 18:48:21 +0000 (18:48 +0000)]
Merge "docs: update HACKING to point to Gerrit"
Øyvind Harboe [Wed, 12 Oct 2011 18:21:18 +0000 (20:21 +0200)]
docs: update HACKING to point to Gerrit
Change-Id: If79e86c731ac06aaefca1aebde40e7cb3de68e4d
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Spencer Oliver [Wed, 12 Oct 2011 11:25:59 +0000 (12:25 +0100)]
docs: update more url's
Change-Id: I476078f32910579fed55777c3b0e6da3ef3363b7
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Spencer Oliver [Wed, 12 Oct 2011 08:32:59 +0000 (09:32 +0100)]
docs: update project url's
Change-Id: I54fc3aff722ed25143aad85e58d19b72fcecbba0
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Michel Jaouen [Mon, 3 Oct 2011 17:03:47 +0000 (19:03 +0200)]
breakpoint : indentation
Change-Id: Icdb8f72dbb516cd0dfc612c3d61b6801f6382be6
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Spencer Oliver [Tue, 11 Oct 2011 16:18:05 +0000 (17:18 +0100)]
replace berlios url's with sourceforge url's
Change-Id: I1c9957bb64df87cee7c5e832f21453eb8934a5fb
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Spencer Oliver [Tue, 11 Oct 2011 12:01:22 +0000 (13:01 +0100)]
contrib: remove extra lf
Change-Id: I6e16010e13ad2ea0cdff99b2e8805c74bcd0eb56
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Andreas Fritiofson [Sun, 31 Jul 2011 08:31:56 +0000 (10:31 +0200)]
stm32f1x: use async algorithm in flash programming routine
Let the target algorithm be running in the background and buffer data
continuously through a FIFO. This reduces or removes the effect of latency
because only a very small number of queue executions needs to be done per
buffer fill. Previously, the many repeated target state changes, register
accesses (really inefficient) and algorithm uploads caused the flash
programming to be latency bound in many cases. Now it should scale better
with increased throughput.
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Andreas Fritiofson [Sun, 17 Jul 2011 12:07:26 +0000 (14:07 +0200)]
stm32f1x: use register base instead of register offset
Access the different flash banks' registers using a bank specific register
base and a register specific offset. This is equivalent but feels more
natural.
Some accesses were discovered that maybe should not be hard coded to bank0
registers. Add a note about that.
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Andreas Fritiofson [Fri, 15 Jul 2011 20:21:34 +0000 (22:21 +0200)]
cortex_m3: use armv7m's async algorithm implementation
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Andreas Fritiofson [Fri, 15 Jul 2011 20:20:34 +0000 (22:20 +0200)]
armv7m: implement async algorithm functions
Split armv7m_run_algorithm into two pieces and use them to reimplement it.
The arch_info parameter is used to keep context between the two calls, so
both calls must refer to the same armv7m_algorithm struct. Ugly but works
for a proof-of-concept.
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Andreas Fritiofson [Fri, 15 Jul 2011 20:18:39 +0000 (22:18 +0200)]
target: add async algorithm entries to the target type
On supported targets, this may be used to start a long running algorithm in
the background so the target may be interacted with during execution and
later wait for its completion.
The most obvious use case is a double buffered flash algorithm that can
upload the next block of data while the algorithm is flashing the current.
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Simon Barner [Fri, 16 Sep 2011 19:15:19 +0000 (21:15 +0200)]
arm-jtag-ew: Send GDB keep_alive() messages when logging USB communication
- Ticket: #35
Simon Barner [Fri, 16 Sep 2011 19:14:39 +0000 (21:14 +0200)]
arm-jtag-ew: Formatting
Simon Barner [Fri, 16 Sep 2011 19:13:39 +0000 (21:13 +0200)]
arm-jtag-ew: In armjtagew_init(), set initial JTAG speed to 32 kHz (before TAP initialization).
This prevents rare communication errors during startup.
Simon Barner [Fri, 16 Sep 2011 19:12:47 +0000 (21:12 +0200)]
arm-jtag-ew: Emit a warning if interface firmware version != 1.6
Simon Barner [Fri, 16 Sep 2011 19:11:40 +0000 (21:11 +0200)]
arm-jtag-ew: Declare interface as `jtag_only'
Simon Barner [Fri, 16 Sep 2011 19:10:23 +0000 (21:10 +0200)]
arm-jtag-ew: Provide armjtagew_speed_div() in order to fix interactive use of `adapter_khz'
Simon Barner [Fri, 16 Sep 2011 19:08:10 +0000 (21:08 +0200)]
arm-jtag-ew: Fix setting interface speed (2/2)
Interface expects speed in Hz, not kHz
- Ticket #34
Simon Barner [Fri, 16 Sep 2011 19:06:02 +0000 (21:06 +0200)]
arm-jtag-ew: Fix setting interface speed (1/2)
CMD_SET_TCK_FREQUENCY message length is 5, not 4
- Ticket: #34
Eugeniy Meshcheryakov [Tue, 4 Oct 2011 13:14:02 +0000 (15:14 +0200)]
Add udev rules for openmoko neo1973 debug board
Clément Burin des Roziers [Fri, 16 Sep 2011 13:55:54 +0000 (15:55 +0200)]
STM32L: Added flash driver and target
Added the flash driver for the STM32L family, which highly differ from the STM32F family.
Added the TCL target file for JTAG access.
Ash Charles [Fri, 30 Sep 2011 23:17:21 +0000 (16:17 -0700)]
Verdex: Add support for Gumstix Verdex boards.
Gumstix Verdex is a PXA270-based series of computer-on-modules. This
configuration file is based off the voipac.cfg configuration with
a different flash memory configuration. This has been tested flyswatter
adapter to reflash a Gumstix Verdex XL6P board.
Michel Jaouen [Mon, 19 Sep 2011 14:49:23 +0000 (16:49 +0200)]
u8500 : config for L2 cache
Michel Jaouen [Thu, 29 Sep 2011 15:17:27 +0000 (17:17 +0200)]
armv7a ,cortex a : add L1, L2 cache support, va to pa support
Steve Bennett [Thu, 29 Sep 2011 06:12:41 +0000 (16:12 +1000)]
jim-nvp is moving from jimtcl to openocd
The jim-nvp code is specific to openocd, so it belongs in openocd,
not in the core jimtcl.
Signed-off-by: Steve Bennett <steveb@workware.net.au>
Vladimir Zapolskiy [Wed, 28 Sep 2011 16:41:23 +0000 (19:41 +0300)]
AM/DM37x: add ES1.2 silicon type into account
The missing value for ES1.2 silicon revision is mentioned in
sprugn4m.pdf, and the recent TI Beagleboard XM is powered by it,
so let support the revision.
Mathias K [Wed, 21 Sep 2011 17:18:26 +0000 (19:18 +0200)]
add target events, run algorithm and default r/w buffer api
Target events are added to get better gdb support. The run
algorithm functionality are implemented to support feature
fast flash write functionality. The new r/w buffer api is now
used to support the special memory address handling. The output
of the md command was fixed.
Michel Jaouen [Tue, 20 Sep 2011 07:37:52 +0000 (09:37 +0200)]
kinetis : fix deadlock on device having hasidcode false.
Mathias K [Sat, 17 Sep 2011 08:09:50 +0000 (10:09 +0200)]
kinetis cpu flash driver
Initial release of the freescale kinetis cpu flash driver.
Luca Bruno [Tue, 13 Sep 2011 13:11:01 +0000 (15:11 +0200)]
contrib: fix udev rules for tty based adaptors
Most serial adaptors are identified by udev with SUBSYSTEM=tty and
without DEVTYPE. This patch fix udev rules to work with any listed
tty-based adaptor. It has been tested with a FTDI-based Bus Pirate.
Signed-off-by: Luca Bruno <lucab@debian.org>
Mathias K [Mon, 12 Sep 2011 19:24:17 +0000 (21:24 +0200)]
kinetis auto mass erase on secured devices
This is a proof of concept to get access to the debug port of a
secured kinetis cpu. On full flash erase the cpu is automatically
secured and the debug port is not accessible.
To get this to work the srst line is needed and the necessary
configuration should be added to the configuration file.
Luca Bruno [Sat, 10 Sep 2011 15:01:46 +0000 (17:01 +0200)]
Fixes and spellchecks for various Buspirate output messages
Signed-off-by: Luca Bruno <lucab@debian.org>
Uwe Bonnes [Thu, 1 Sep 2011 15:14:35 +0000 (17:14 +0200)]
Add definition for the STEVAL-PCC010 board with the STM32F207
Richard Uhler [Thu, 25 Aug 2011 20:29:33 +0000 (13:29 -0700)]
Implementation of a new jtag remote_bitbang driver.
The driver sends ascii encoded bitbang commands over unix sockets or TCP to
another process. This driver is useful for debugging software running on
processors which are being simulated.
Martin Schmölzer [Wed, 31 Aug 2011 15:22:21 +0000 (17:22 +0200)]
ULINK driver: Remove typedefs in ulink.c
Signed-off-by: Martin Schmölzer <martin.schmoelzer@student.tuwien.ac.at>
Martin Schmölzer [Wed, 31 Aug 2011 14:51:41 +0000 (16:51 +0200)]
ULINK driver: Remove typedefs in OpenULINK firmware: Use typedefs from stdint.h (uint8_t, uint16_t) instead of custom typedefs in shorttypes.h (u8, u16, ...)
Signed-off-by: Martin Schmölzer <martin.schmoelzer@student.tuwien.ac.at>
Martin Schmölzer [Tue, 30 Aug 2011 22:20:35 +0000 (00:20 +0200)]
ULINK driver: Remove typedefs in OpenULINK firmware USB descriptor structures
Signed-off-by: Martin Schmölzer <martin.schmoelzer@student.tuwien.ac.at>
Rodrigo L. Rosa [Wed, 31 Aug 2011 22:43:11 +0000 (15:43 -0700)]
usleep to jtag_sleep
this will help avoid platform specific timing issues
Rodrigo L. Rosa [Wed, 31 Aug 2011 19:37:20 +0000 (12:37 -0700)]
static for some functions
made two functions into static, since they are not required by anything external
Rodrigo L. Rosa [Wed, 31 Aug 2011 19:32:14 +0000 (12:32 -0700)]
speed up, relocate function
added an attempt to use the non-reseting halting sequence. if it fails, then the full sequence will be attempted. this makes things a bit faster most of the time.
changed the location of a function, avoiding a forward def
Øyvind Harboe [Wed, 31 Aug 2011 14:27:09 +0000 (16:27 +0200)]
Merge branch 'dsp5680xx_cherry' of git://repo.or.cz/openocd/dsp568013 into fix
Martin Schmoelzer [Tue, 23 Aug 2011 15:22:53 +0000 (17:22 +0200)]
ULINK driver: Update firmware image to reflect the latest changes in source code.
Signed-off-by: Martin Schmölzer <martin.schmoelzer@student.tuwien.ac.at>
Martin Schmoelzer [Thu, 4 Aug 2011 20:30:25 +0000 (22:30 +0200)]
ULINK driver: Add '-lm' linker flag when building this driver (required for correct calculation of JTAG TCK speed setting)
Signed-off-by: Martin Schmölzer <martin.schmoelzer@student.tuwien.ac.at>
Martin Schmoelzer [Thu, 4 Aug 2011 17:03:59 +0000 (19:03 +0200)]
ULINK driver: Implement variable TCK frequency in OpenOCD driver
Signed-off-by: Martin Schmölzer <martin.schmoelzer@student.tuwien.ac.at>
Martin Schmölzer [Mon, 4 Jul 2011 17:03:29 +0000 (19:03 +0200)]
ULINK driver: Implement variable TCK frequency in OpenULINK firmware
Also, speed up jtag_clock_tck() significantly (150 kHz -> 375 kHz)
Signed-off-by: Martin Schmölzer <martin.schmoelzer@student.tuwien.ac.at>
Martin Schmoelzer [Tue, 23 Aug 2011 12:21:56 +0000 (14:21 +0200)]
ULINK driver: Fix whitespace in OpenULINK firmware usb.c module (trivial)
Signed-off-by: Martin Schmölzer <martin.schmoelzer@student.tuwien.ac.at>
Martin Schmoelzer [Tue, 23 Aug 2011 14:53:03 +0000 (16:53 +0200)]
ULINK driver: Implement JTAG_PATHMOVE command
Signed-off-by: Martin Schmölzer <martin.schmoelzer@student.tuwien.ac.at>
Martin Schmölzer [Mon, 4 Jul 2011 10:29:02 +0000 (12:29 +0200)]
ULINK driver: Implement JTAG_STABLECLOCKS command
Signed-off-by: Martin Schmölzer <martin.schmoelzer@student.tuwien.ac.at>
Martin Schmölzer [Mon, 4 Jul 2011 17:50:46 +0000 (19:50 +0200)]
ULINK driver: Implement command to manually force downloading firmware image from arbitrary location
Signed-off-by: Martin Schmölzer <martin.schmoelzer@student.tuwien.ac.at>
Martin Schmölzer [Mon, 4 Jul 2011 10:38:47 +0000 (12:38 +0200)]
ULINK driver: Re-order queue functions to reflect the order in commands.h
Signed-off-by: Martin Schmölzer <martin.schmoelzer@student.tuwien.ac.at>
Martin Schmölzer [Mon, 4 Jul 2011 10:30:13 +0000 (12:30 +0200)]
ULINK driver: Properly propagate return values in ulink_execute_queue()
Signed-off-by: Martin Schmölzer <martin.schmoelzer@student.tuwien.ac.at>
Martin Schmölzer [Sun, 26 Jun 2011 23:00:15 +0000 (01:00 +0200)]
ULINK driver: Update some comments, fix some coding mistakes
Signed-off-by: Martin Schmölzer <martin.schmoelzer@student.tuwien.ac.at>
simonqian.openocd [Tue, 30 Aug 2011 17:52:20 +0000 (01:52 +0800)]
vsllink driver compile fails with'vsllink_debug_buffer' defined but not used
USB communication is handled by code under versaloon directory.
So _DEBUG_USB_COMMS_ should not be used in vsllink.c.
Attachment is the patch.
Rodrigo L. Rosa [Wed, 31 Aug 2011 04:14:33 +0000 (21:14 -0700)]
removed trailing whitespaces
emacs is awesome.
replace-regexp RET [ ]+$ RET RET
and it's done
Rodrigo L. Rosa [Wed, 31 Aug 2011 04:08:59 +0000 (21:08 -0700)]
fix enter debug mode for locking
added an alternative way to enter debug mode, which does not require restarting the chip.
this will not always work, but in general it will (failure 0.3%), and failure is not a dramatic issue, simply have to use the full sequence.
the user can only access "halt", which uses the full sequence, so the user should not have any problems.
restarting the chip requires reconfiguring the flash module. the doc is very poor, so i'd rather have the two methods, and live with the 0.3%.
Rodrigo L. Rosa [Tue, 30 Aug 2011 21:46:20 +0000 (14:46 -0700)]
fix irlen handling
sometimes the master tap will be enabled, since tap switching is required during halt/lock/unlocking procedures.
now irscan handles this, avoiding unnecessary warnings and preventing errors.
Rodrigo L. Rosa [Tue, 30 Aug 2011 22:13:49 +0000 (15:13 -0700)]
fix debug mode,lock,unlock
got new info regarding setting the chip to debug mode, and locking/unlocking flash memory.
the newer implementation is a bit slower, but always works.
the previous implementation would randomly (as once every 25k-70k times) get the chip into a state where the freescale tool would be necessary. this is fixed now.
added functions to play around with the jtag state machine. they are not the happiest, but are necessary to be able to execute the halting/locking/unlocking sequences.
Conflicts:
src/target/dsp5680xx.c
Rodrigo L. Rosa [Tue, 30 Aug 2011 21:26:05 +0000 (14:26 -0700)]
fix error handling during halt
the user can execute halt, but no enter_debug_mode. modified the error handling to suite this.
the new implementation of unlocking will use enter_debug_mode, and should not get the same errors as the user would, because not being able to enter debug mode is actually success when checking for locked flash.
Rodrigo L. Rosa [Tue, 30 Aug 2011 21:19:09 +0000 (14:19 -0700)]
optional crc for flash writing
crc check was always performed on newly flashed data, now it is optional
flash mem can be locked by writing a specific word to a specific address in flash.
to verify flash, target must be halted, and this will (when the new halt sequence is implemented) require reseting the chip. if the target is reset after writing the lock words, then it will lock, hence the CRC will fail because it is not possible to read stuff from the target.
also added a function that resets the jtag state machine.
this is not used yet, but will be soon.
it is implemented to allow strict control over JTAG state machine, necessary to implement to halt and unlocking sequences.
Rodrigo L. Rosa [Tue, 30 Aug 2011 20:49:44 +0000 (13:49 -0700)]
def syntax to match tap irlen
the master tap has a 4 bit irlen
changed the instructions to be 4 bit, ie, removed the zeros.
it makes it clearer to interpret.
Rodrigo L. Rosa [Tue, 16 Aug 2011 02:50:59 +0000 (19:50 -0700)]
dsp568013 disable polling by default
Heythem Bouhaja [Mon, 9 May 2011 08:40:35 +0000 (10:40 +0200)]
cortex_a hybrid & context breakpoints
Evan Hunter [Fri, 26 Aug 2011 06:30:45 +0000 (16:30 +1000)]
Fix off by one bug in FreeRTOS
Jonathan Dumaresq [Wed, 24 Aug 2011 20:13:35 +0000 (16:13 -0400)]
Add Valuline HD to config file
This will add the BSTAP for the medium and high density devices
Jonathan Dumaresq [Wed, 24 Aug 2011 20:08:18 +0000 (16:08 -0400)]
This will add the Value Line HD of stm32 devices.
This has been tested on STM32F100VE
Jie Zhang [Wed, 24 Aug 2011 15:23:04 +0000 (11:23 -0400)]
remove target argument from gdb packet handling functions
Evan [Mon, 18 Jul 2011 03:47:24 +0000 (13:47 +1000)]
Add suspended task list to FreeRTOS support
Evan Hunter [Tue, 23 Aug 2011 04:02:24 +0000 (14:02 +1000)]
Fix FreeRTOS thread list parsing
Jim Paris [Mon, 22 Aug 2011 20:48:14 +0000 (16:48 -0400)]
Fix redbee config files
Currently the board/redbee-*.cfg files incorrectly include the
interface definition. Move the interfaces to interface/,
and create a single board/redbee.cfg that is common to both boards.
Intended usage is now:
openocd -f interface/redbee-econotag.cfg -f board/redbee.cfg
Andreas Bießmann [Fri, 19 Aug 2011 14:53:40 +0000 (16:53 +0200)]
non_cfi: add SST39WF1601 support
Invented by jknick in sparkfun forum:
http://forum.sparkfun.com/viewtopic.php?t=19788
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
olivier Schonken [Sat, 20 Aug 2011 14:31:35 +0000 (16:31 +0200)]
Fix Sam3u flash bank 1 issue
Gunnar Henne [Thu, 18 Aug 2011 08:52:16 +0000 (09:52 +0100)]
cfi: add EN29LV800BB support
Posted by telekatz@gmx.de in the bettyhacks forum for openocd
0.4.0 and integrated into 0.5.0 by Gunnar Henne.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Jie Zhang [Wed, 17 Aug 2011 15:21:22 +0000 (11:21 -0400)]
remove white space before TAB
Spencer Oliver [Tue, 16 Aug 2011 16:33:19 +0000 (17:33 +0100)]
build: check buspirate build host
buspirate has never supported building on native windows (mingw).
configure will now check this is not the case.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
SimonQian [Mon, 11 Jul 2011 17:48:05 +0000 (01:48 +0800)]
versaloon driver update
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Spencer Oliver [Tue, 16 Aug 2011 11:06:57 +0000 (12:06 +0100)]
build: check guess-rev.sh can be found/executed
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Spencer Oliver [Tue, 16 Aug 2011 11:00:27 +0000 (12:00 +0100)]
build: rename configure.in to configure.ac
configure.ac is the correct name to use with modern autotools.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Spencer Oliver [Tue, 16 Aug 2011 10:58:06 +0000 (11:58 +0100)]
jim: update to fix mingw/msys build issues
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Jie Zhang [Mon, 15 Aug 2011 14:52:11 +0000 (10:52 -0400)]
show git commit number even when cross-compiling
AC_CHECK_FILE will die when cross-compiling. So don't use it to test the existence of guess-rev.sh.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Øyvind Harboe [Sun, 14 Aug 2011 16:28:12 +0000 (18:28 +0200)]
jimtcl: delete OpenOCD's broken 'stacktrace' command
Use "info stacktrace" instead. This fixes build problems with
latest Jim Tcl.
Stefan Mahr [Wed, 10 Aug 2011 21:42:28 +0000 (23:42 +0200)]
mips: fix potential alignment error
Stefan Mahr [Wed, 10 Aug 2011 21:29:20 +0000 (23:29 +0200)]
mips: fix reading uint32 and uint16 when running on big endian host
Stefan Mahr [Wed, 10 Aug 2011 20:34:41 +0000 (22:34 +0200)]
target: add helper functions to get/set u16 or u32 array from/to buffer
Spencer Oliver [Wed, 10 Aug 2011 21:23:29 +0000 (22:23 +0100)]
ftd2xx: fix build warnings
Due to build warnings introduced in newer versions of ftd2xx we
use strings to report errors rather than result codes. This also
gives us the same behaviour as libftdi.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Jie Zhang [Wed, 10 Aug 2011 19:32:09 +0000 (15:32 -0400)]
remove useless pxref to SMP subsection
Øyvind Harboe [Thu, 11 Aug 2011 14:23:15 +0000 (16:23 +0200)]
Merge branch 'dsp5680xx_cherry' of git://repo.or.cz/openocd/dsp568013 into HEAD
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)
Code Review / openocd.git / log