openocd.git
9 years agoopenocd.texi: minor fixes in Reset Configuration
Aaron Carroll [Fri, 28 Jan 2011 06:20:24 +0000 (17:20 +1100)]
openocd.texi: minor fixes in Reset Configuration

Signed-off-by: Aaron Carroll <aaronc@cse.unsw.edu.au>
9 years agoadd cortex-r4 etm id to dap info
Mathias K [Thu, 27 Jan 2011 08:16:09 +0000 (09:16 +0100)]
add cortex-r4 etm id to dap info

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
9 years ago- add xds100v2 configuaration file
Mathias K [Wed, 26 Jan 2011 16:35:56 +0000 (17:35 +0100)]
- add xds100v2 configuaration file

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
9 years agoFixed small mistakes in at91sam3 info command
Thomas Schmid [Tue, 25 Jan 2011 16:15:30 +0000 (08:15 -0800)]
Fixed small mistakes in at91sam3 info command

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
9 years agoadd basic TI xds100v2 support
Mathias K [Wed, 26 Jan 2011 12:28:48 +0000 (12:28 +0000)]
add basic TI xds100v2 support

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
9 years agofix segfault from stack corruption in ahbap_debugport_init
Andreas Fritiofson [Wed, 26 Jan 2011 12:13:14 +0000 (12:13 +0000)]
fix segfault from stack corruption in ahbap_debugport_init

ahbap_debugport_init was queueing reads to a local stack variable but
didn't execute the queue before returning. Since the result of the reads
are not used anyway, it's better to pass NULL as the destination instead of
a dummy variable. I changed this throughout the function, even for the
reads that were actually executed.

Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
9 years agostellaris: automatically generate and update device IDs
Eric Wetzel [Tue, 18 Jan 2011 16:17:22 +0000 (11:17 -0500)]
stellaris: automatically generate and update device IDs

Added a Perl script to contrib that uses the header files in StellarisWare complete Firmware Development Package provided by TI/Luminary to generate a new list of device IDs

Used Perl script and revision 6734 of TI/Luminary StellarisWare to update device IDs

9 years agoFlash driver for em357
Erik Botö [Mon, 10 Jan 2011 18:13:52 +0000 (19:13 +0100)]
Flash driver for em357

Hi,

I took the stm32x NOR flash driver and adapted it for the Ember EM357
chip. This chip is very similar to em351 and stm32w so the driver
should be easily extended to support those as well if anyone can get
their hands on some of those for testing.

changelog:
Added NOR flash driver em357

Best regards,
Erik Botö

9 years agostr9xpec: Find flash controller from the chain.
Santeri Salko [Thu, 13 Jan 2011 13:21:06 +0000 (15:21 +0200)]
str9xpec: Find flash controller from the chain.

Find the flash controller by position since it is before the core,
not after it.

This fixes the problem that str9xpec enable_turbo (or any other
str9xpec command) did not work. (See my post in
http://forum.sparkfun.com/viewtopic.php?f=18&t=25542)

Signed-off-by: Santeri Salko <santeri.salko@gmail.com>
9 years agotransport: fix transport command args gaffe
simon qian [Thu, 13 Jan 2011 07:27:42 +0000 (08:27 +0100)]
transport: fix transport command args gaffe

the wrong index of argv. argv[0] is the command itself,
argv[1] the the transport to select.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
9 years agotransport: fix LOG_DEBUG gaffe
simon qian [Thu, 13 Jan 2011 07:25:22 +0000 (08:25 +0100)]
transport: fix LOG_DEBUG gaffe

LOG_DEBUG() arguments are only evaluated when DEBUG logging
is enabled, do not use arguments that have side effects
like foo++.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
9 years agocfi: fix release build warnings
Spencer Oliver [Mon, 10 Jan 2011 09:37:18 +0000 (09:37 +0000)]
cfi: fix release build warnings

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
9 years agonit: more LOG_* \n fixes
Eric Wetzel [Thu, 6 Jan 2011 02:54:12 +0000 (21:54 -0500)]
nit: more LOG_* \n fixes

Remove extra \n from LOG_DEBUG, LOG_INFO, and LOG_WARNING messages

Remove LOG_INFO_N
LOG_INFO_N was only used once and had a \n at the end

Change LOG_USER_N calls that end with \n to LOG_USER

9 years agoAdd another level of procedures to LPC2xxx initialization - procedures for specific...
Freddie Chopin [Sat, 8 Jan 2011 11:29:31 +0000 (12:29 +0100)]
Add another level of procedures to LPC2xxx initialization - procedures for specific targets (setup_lpc<number>) take core clock and adapter clock as parameters. This way "constant" parameters (flash size and type, CPUTAPID, etc.) do not need to be copied if one wishes to change the "variable" parameters - like the core clock or adapter clock - in a board config file or somewhere else.

Signed-off-by: Freddie Chopin <freddie_chopin@op.pl>
9 years agopresent CM3 Trace agenda
David Brownell [Sun, 9 Jan 2011 02:11:12 +0000 (18:11 -0800)]
present CM3 Trace agenda

9 years agoAdd common LPC2xxx setup procedure, use in all LPC2xxx files.
Freddie Chopin [Thu, 6 Jan 2011 11:48:05 +0000 (12:48 +0100)]
Add common LPC2xxx setup procedure, use in all LPC2xxx files.

Signed-off-by: Freddie Chopin <freddie_chopin@op.pl>
9 years agocfi: use safer arch detection
Spencer Oliver [Thu, 6 Jan 2011 10:35:59 +0000 (10:35 +0000)]
cfi: use safer arch detection

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
9 years agoloader: update loader src for armv7-m arch
Spencer Oliver [Thu, 6 Jan 2011 10:35:02 +0000 (10:35 +0000)]
loader: update loader src for armv7-m arch

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
9 years agoAdd the support for the armv7m arch.
Jonathan Dumaresq [Wed, 5 Jan 2011 16:48:41 +0000 (11:48 -0500)]
Add the support for the armv7m arch.

Signed-off-by: Jonathan Dumaresq <jdumaresq@cimeq.qc.ca>
9 years agoAdd the contrib file for the armv7m arch
Jonathan Dumaresq [Wed, 5 Jan 2011 16:47:58 +0000 (11:47 -0500)]
Add the contrib file for the armv7m arch

Signed-off-by: Jonathan Dumaresq <jdumaresq@cimeq.qc.ca>
9 years agonit: do not add \n at end of LOG_ERROR
Eric Wetzel [Wed, 5 Jan 2011 19:24:54 +0000 (14:24 -0500)]
nit: do not add \n at end of LOG_ERROR

Fixed in many other places, and submitted in response to Øyvind's invitation.

9 years agomips32: add fastdata loader working area
Spencer Oliver [Tue, 4 Jan 2011 12:29:49 +0000 (12:29 +0000)]
mips32: add fastdata loader working area

Add a working area that is preserved between calls to
mips_m4k_bulk_write_memory - this gives us a speed increase
of approx 3kb/sec during flash writes to the pic32mx.

This area is released during a resume/reset.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
9 years agotarget: change working area free data type
Spencer Oliver [Fri, 24 Dec 2010 11:17:09 +0000 (11:17 +0000)]
target: change working area free data type

We only use the struct working_area member 'free' as a
true/false type so might as well use a bool data type.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
9 years agonit: do not add \n at end of LOG_ERROR
Øyvind Harboe [Mon, 3 Jan 2011 12:37:38 +0000 (13:37 +0100)]
nit: do not add \n at end of LOG_ERROR

This is done in many other places as well, patch
to fix gratefully accepted!

9 years agoerror handling: the error number is not part of the user interface
Øyvind Harboe [Mon, 3 Jan 2011 12:30:28 +0000 (13:30 +0100)]
error handling: the error number is not part of the user interface

Do not propagate error number to user. This is for internal
programming purposes only. Error messages to the user is
reported as text via LOG_ERROR().

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
9 years agoactux3.cfg: add function to setup for u-boot debugging
Michael Schwingen [Sun, 2 Jan 2011 20:01:22 +0000 (21:01 +0100)]
actux3.cfg: add function to setup for u-boot debugging

Signed-off-by: Michael Schwingen <michael@schwingen.org>
9 years agocfi_protect is not implemented on Spansion flashes (many do not even have protection...
Michael Schwingen [Sun, 2 Jan 2011 20:01:20 +0000 (21:01 +0100)]
cfi_protect is not implemented on Spansion flashes (many do not even have protection bits). Demote from error to warning, so that common board code can use "flash write_image erase unlock" regardless of the flash type.

Signed-off-by: Michael Schwingen <michael@schwingen.org>
9 years agonon-CFI flash code uses data from CFI structures. Make sure that timeouts are filled...
Michael Schwingen [Sun, 2 Jan 2011 20:01:19 +0000 (21:01 +0100)]
non-CFI flash code uses data from CFI structures. Make sure that timeouts are filled in on non-CFI flashes, and print CFI information in all cases, nut just on CFI flashes.

Signed-off-by: Michael Schwingen <michael@schwingen.org>
9 years agosvf: implement sleep for RUNTEST min_time
Jon Povey [Sun, 2 Jan 2011 14:52:48 +0000 (23:52 +0900)]
svf: implement sleep for RUNTEST min_time

Signed-off-by: Jon Povey <jon.povey@racelogic.co.uk>
min_time was effectively ignored, I needed it to program a Lattice MachXO
which uses a RUNTEST to wait for an erase operation, amongst other things.

With this patch pauses happen and I can program the device with an SVF
generated in LSC ispVM (with "Rev D Standard" checked to suppress
nonstandard LOOP statements)

9 years agosvf: fix USAGE and related error reporting
Jon Povey [Sun, 2 Jan 2011 14:52:47 +0000 (23:52 +0900)]
svf: fix USAGE and related error reporting

Signed-off-by: Jon Povey <jon.povey@racelogic.co.uk>
9 years agoNAND/S3CXXXX: remove private "target" copy
Antonio Borneo [Fri, 31 Dec 2010 11:46:09 +0000 (19:46 +0800)]
NAND/S3CXXXX: remove private "target" copy

Remove "target" form private data, and use
common one in struct nand_block.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
9 years agoNAND/ORION: remove private "target" copy
Antonio Borneo [Fri, 31 Dec 2010 11:46:08 +0000 (19:46 +0800)]
NAND/ORION: remove private "target" copy

Remove "target" form private data, and use
common one in struct nand_block.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
9 years agoNAND/NUC910: remove private "target" copy
Antonio Borneo [Fri, 31 Dec 2010 11:46:07 +0000 (19:46 +0800)]
NAND/NUC910: remove private "target" copy

Remove "target" form private data, and use
common one in struct nand_block.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
9 years agoNAND/MX3: remove private "target" copy
Antonio Borneo [Fri, 31 Dec 2010 11:46:06 +0000 (19:46 +0800)]
NAND/MX3: remove private "target" copy

Remove "target" form private data, and use
common one in struct nand_block.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
9 years agoNAND/MX2: remove private "target" copy
Antonio Borneo [Fri, 31 Dec 2010 11:46:05 +0000 (19:46 +0800)]
NAND/MX2: remove private "target" copy

Remove "target" form private data, and use
common one in struct nand_block.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
9 years agoNAND/LPC3180: remove private "target" copy
Antonio Borneo [Fri, 31 Dec 2010 11:46:04 +0000 (19:46 +0800)]
NAND/LPC3180: remove private "target" copy

Remove "target" form private data, and use
common one in struct nand_block.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
9 years agoNAND/DAVINCI: remove private "target" copy
Antonio Borneo [Fri, 31 Dec 2010 11:46:03 +0000 (19:46 +0800)]
NAND/DAVINCI: remove private "target" copy

Remove "target" form private data, and use
common one in struct nand_block.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
9 years agoNAND/AT91SAM9: remove private "target" copy
Antonio Borneo [Fri, 31 Dec 2010 11:46:02 +0000 (19:46 +0800)]
NAND/AT91SAM9: remove private "target" copy

Remove "target" form private data, and use
common one in struct nand_block.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
9 years agoNAND/TCL: prepare for common "target" reference
Antonio Borneo [Fri, 31 Dec 2010 11:46:01 +0000 (19:46 +0800)]
NAND/TCL: prepare for common "target" reference

Every NAND driver keeps private copy of "target"
structure.
Prepare infostructure to move private "target"
copy in common/shared struct nand_device.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
9 years agoNAND/TCL: fix segfault on syntax error
Antonio Borneo [Fri, 31 Dec 2010 11:18:11 +0000 (19:18 +0800)]
NAND/TCL: fix segfault on syntax error

Fix segfault if incomplete command "nand device dummy"
is executed.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
9 years agoNAND/CORE: Comment use of alive_sleep()
Antonio Borneo [Fri, 31 Dec 2010 11:18:10 +0000 (19:18 +0800)]
NAND/CORE: Comment use of alive_sleep()

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
9 years agoNAND/CORE: Replace decimal dot in messages
Antonio Borneo [Fri, 31 Dec 2010 11:18:09 +0000 (19:18 +0800)]
NAND/CORE: Replace decimal dot in messages

Table of NAND devices reports operating voltage.
Replace comma with proper decimal dot.

Øyvind: "." is correct for UK/US, but incorrect for
many other languages. OpenOCD is not localized at this
point, so sticking to "." for US/UK should be OK.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
9 years agoflash/nand: review NAND driver interface
Antonio Borneo [Fri, 31 Dec 2010 11:18:08 +0000 (19:18 +0800)]
flash/nand: review NAND driver interface

From struct nand_flash_controller :
- remove unused field register_commands;
- remove field controller_ready, exported but
  never referenced.
Remove dead code pointed by controller_ready.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
9 years agoCORTEX A8: Fix broken CPU identification
Marek Vasut [Thu, 30 Dec 2010 03:54:24 +0000 (04:54 +0100)]
CORTEX A8: Fix broken CPU identification

This patch fixes the issue where the OMAP CPU (and possibly others) was mistaken
for iMX51 and therefore had misadjusted debug base.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
9 years agoCompilation Warnings on OS X 10.5
Andrew MacIsaac [Wed, 29 Dec 2010 20:15:48 +0000 (12:15 -0800)]
Compilation Warnings on OS X 10.5

I received a number of "-Wshadow" related warnings (treated as errors) while
trying to build on OS X Leopard.  In addition, there were two miscellaneous
other warnings in the flash drivers.  Attached are two patches which correct
these issues and the commit messages to accompany them.

My system has the following configuration (taken from uname -a):

Darwin 9.8.0 Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT 2009;
root:xnu-1228.15.4~1/RELEASE_I386 i386

=== Werror_patch.txt Commit Message ===
compilation: fixes for -Wshadow warnings on OS X

These changes fix -Wshadow compilation warnings on OS X 10.5.8

Compiled with the following configure command:

../configure --prefix=/usr/local --enable-maintainer-mode --enable-jlink
--enable-ft2232_libftdi

=== flash_patch.txt Commit Message ===
compilation: fixes for flash driver warnings on OS X

These changes fix two compilation warnings on OS X 10.5.8:

../../../../src/flash/nor/at91sam3.c:2767: warning: redundant redeclaration
of 'at91sam3_flash'
../../../../src/flash/nor/at91sam3.c:101: warning: previous declaration of
'at91sam3_flash' was here

and

../../../../src/flash/nor/stmsmi.c:205: warning: format not a string literal
and no format arguments

Compiled with the following configure command:

../configure --prefix=/usr/local --enable-maintainer-mode --enable-jlink
--enable-ft2232_libftdi
===

Andrew

9 years agowarning: fix warning where GCC didn't catch a doubly declared global structure
Øyvind Harboe [Wed, 29 Dec 2010 21:14:43 +0000 (22:14 +0100)]
warning: fix warning where GCC didn't catch a doubly declared global structure

Why hasn't earlier versions of GCC caught this? Bug?

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
9 years agowarnings: use more 'const' for char *
Øyvind Harboe [Wed, 29 Dec 2010 21:07:21 +0000 (22:07 +0100)]
warnings: use more 'const' for char *

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
9 years agotarget: do not expose error numbers to users
Øyvind Harboe [Wed, 29 Dec 2010 19:58:30 +0000 (20:58 +0100)]
target: do not expose error numbers to users

error numbers are only reported at DEBUG log levels and
used internally, they are not part of the user interface.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
9 years agoinitial SWD transport (SWD infrastructure #2)
David Brownell [Sat, 25 Dec 2010 02:50:41 +0000 (18:50 -0800)]
initial SWD transport (SWD infrastructure #2)

This piggy backs on JTAG so it's not yet pretty, but that
seems unavoidable so far given today's OpenOCD internals.

SWD init and data transfer  are unfinished and untested, but
that should cause no regressions, and will be addressed by
the time drivers start using this infrastructure.  Checking
in whould get the code working better sooner, and turn up any
structural/architectural issues while they're easier to fix.

The debug adapter drivers will provide simple SWD driver
structs with methods that kick in as needed (instead of JTAG).
So far just one adapter driver has been updated (not yet
ready to use or circulate).

The biggest issues are probably
  - fault handling, where the ARM Debug Interface V5 pipelining
    needs work in both JTAG and SWD modes and
  - missing  rewrite of block I/O code to work on both of our
Cortex-ready transports (Current code is  hard-wired to JTAG);
relates also to the pipelining issue.
  - omitted support to activate/deactivate SWO/SWV trace (this is
    technically trivial, but configuring what to trace is NOT.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
----

 doc/openocd.texi        |   17 ++
 src/jtag/core.c         |    3
 src/jtag/interface.h    |    4
 src/jtag/jtag.h         |    2
 src/jtag/swd.h          |  114 +++++++++++++++++++
 src/jtag/tcl.c          |    2
 src/target/adi_v5_swd.c |  281 ++++++++++++++++++++++++++++++++++++++++++++++--
 src/target/arm_adi_v5.c |    8 +
 src/target/arm_adi_v5.h |    3
 9 files changed, 425 insertions(+), 9 deletions(-)

9 years agostm32x : always use valid flash base address
Spencer Oliver [Thu, 23 Dec 2010 13:10:15 +0000 (13:10 +0000)]
stm32x : always use valid flash base address

This change matches the previous behaviour of using the known
flash address.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
9 years agoflash: print flash bank name on flash info cmd
Spencer Oliver [Thu, 23 Dec 2010 12:39:22 +0000 (12:39 +0000)]
flash: print flash bank name on flash info cmd

The flash bank name is a required element in adding flash banks,
however other than looking at the config file there is no way of
getting the name used in openocd.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
9 years agostm32: fix reversed option byte write
Spencer Oliver [Thu, 23 Dec 2010 12:06:12 +0000 (12:06 +0000)]
stm32: fix reversed option byte write

This has been a long standing bug that has never been spotted.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
9 years agostm32: update option bytes for stm32xl family
Spencer Oliver [Thu, 23 Dec 2010 12:04:53 +0000 (12:04 +0000)]
stm32: update option bytes for stm32xl family

add supoort for xl family boot bank option.
The option byte handling will be cleaned up in a later patch.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
9 years agostm32: add stm32 xl family flash support
Spencer Oliver [Wed, 22 Dec 2010 17:20:11 +0000 (17:20 +0000)]
stm32: add stm32 xl family flash support

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
9 years agostm32: add dual flash bank support
Spencer Oliver [Wed, 22 Dec 2010 17:18:14 +0000 (17:18 +0000)]
stm32: add dual flash bank support

This patch adds the initial dual flash bank support for devices such
as the stm32xl family.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
9 years agocontrib: change stm32 flash loader extension
Spencer Oliver [Fri, 10 Dec 2010 10:35:03 +0000 (10:35 +0000)]
contrib: change stm32 flash loader extension

As the stm32 flash loader now uses the preprocessor change extension
so that it used by default.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
9 years agolpc2148: redo to the new target configuration scheme
Øyvind Harboe [Tue, 21 Dec 2010 19:59:12 +0000 (20:59 +0100)]
lpc2148: redo to the new target configuration scheme

Define a proc which PCBs can easily override.

Also demonstrates how to add multiple TAP exepcted-id's
using arguments.

Added 0x3f0f0f0f as expected TAP-id. Old LPC2148 silicon
I happened to have on my desk?

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
9 years agoconfig: add init_targets proc that is executed just before init
Øyvind Harboe [Sun, 19 Dec 2010 10:24:51 +0000 (11:24 +0100)]
config: add init_targets proc that is executed just before init

this allows configuration scripts to export a init_targets proc
rather than setting up the target directly.

This allows for new conventions in how to set up target vs. board
script and how to transfer default settings between board and
target scripts.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
9 years agobootstrap: by default the submodules are initialized
Øyvind Harboe [Wed, 22 Dec 2010 13:29:34 +0000 (14:29 +0100)]
bootstrap: by default the submodules are initialized

use "nosubmodule" to skip setting up submodules.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
9 years agoserver: remove error value from LOG_INFO
Øyvind Harboe [Tue, 21 Dec 2010 13:07:17 +0000 (14:07 +0100)]
server: remove error value from LOG_INFO

the error values is not part of the interface to the user,
so they should never be printed in LOG_INFO or LOG_USER.

Printing them in LOG_DEBUG() rarely makes much sense but
is OK.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
9 years agotcl/interface/flashlink.cfg: Fix broken ST URL
Tormod Volden [Sun, 19 Dec 2010 22:39:05 +0000 (23:39 +0100)]
tcl/interface/flashlink.cfg: Fix broken ST URL

9 years agotcl/board: Clean up STM32 EVAL boards configurations
Tormod Volden [Sun, 19 Dec 2010 22:39:04 +0000 (23:39 +0100)]
tcl/board: Clean up STM32 EVAL boards configurations

Make consistent use of hex memory size for flashing.

Delete stm32f10x_128k_eval.cfg. It has no product reference
nor any settings in it.

9 years agotcl/board: Fix ST URLs in stm32* eval board configuration files
Tormod Volden [Sun, 19 Dec 2010 22:39:03 +0000 (23:39 +0100)]
tcl/board: Fix ST URLs in stm32* eval board configuration files

ST recently rewamped (screwed up) their web site and broke all links.
Also match the chip names with those on the web site product
descriptions.

9 years agoupdate IXP42x target / XBA board config
Michael Schwingen [Sun, 19 Dec 2010 15:17:46 +0000 (16:17 +0100)]
update IXP42x target / XBA board config

9 years agoAdd support for Hilscher netX controllers
Michael Trensch [Thu, 16 Dec 2010 14:33:16 +0000 (15:33 +0100)]
Add support for Hilscher netX controllers

9 years agoscript: support only Tcl comments
Øyvind Harboe [Sat, 18 Dec 2010 09:16:26 +0000 (10:16 +0100)]
script: support only Tcl comments

Only Tcl comments are now supported. For classic style
commands comments were supported at the end of the line.

Move in the direction of letting the script language
decide syntax, rather than have special rules for some
commands.

Before this patch goes in, the scripts should be updated
to use ;# instead of # for end of line comments.

> mdw 0 1 2
mdw ['phys'] address [count]
  zy1000.cpu mdw address [count]
Command handler execution failed
in procedure 'mdw'
> mdw 0 1 #2
mdw ['phys'] address [count]
  zy1000.cpu mdw address [count]
Command handler execution failed
in procedure 'mdw'
> mdw 0 1 ;#2
0x00000000: ffffffff
> mdw 0 1
0x00000000: ffffffff
> mdw 0
0x00000000: ffffffff

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
9 years agoTCL: fix non TCL comments
Antonio Borneo [Sat, 18 Dec 2010 17:22:53 +0000 (01:22 +0800)]
TCL: fix non TCL comments

End of line comments fixed with ';' before '#'.
Added few additional 'space' to keep indentation in
multi-line comments.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
9 years agoopenocd doc: update the comments about Jim Tcl a bit
Øyvind Harboe [Thu, 16 Dec 2010 08:12:22 +0000 (09:12 +0100)]
openocd doc: update the comments about Jim Tcl a bit

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
9 years agoFix for compilation failure amt_jtagaccel.c
John Devereux [Tue, 14 Dec 2010 12:17:01 +0000 (12:17 +0000)]
Fix for compilation failure amt_jtagaccel.c

Hi,

I think there are errors in amt_jtagaccel.c

I attach a small patch that I needed to make it compile.

9 years agoFix for segfault in handle_nand_dump_command.
Paul Richards [Wed, 15 Dec 2010 12:42:03 +0000 (21:42 +0900)]
Fix for segfault in handle_nand_dump_command.

9 years agostm32: fix unprotect
Øyvind Harboe [Tue, 14 Dec 2010 08:26:08 +0000 (09:26 +0100)]
stm32: fix unprotect

the unprotect fn in stm32 needs to unprotect more sectors
than was requested aligned to some boundary.

Print warning when this happens.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
9 years agoflash: clarify protect documentation
Øyvind Harboe [Tue, 14 Dec 2010 08:29:26 +0000 (09:29 +0100)]
flash: clarify protect documentation

some chips unprotect more than the range asked for. The
protect fn, must unprotect/protect minimally the range given.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
9 years agocontrib: add source to the cfi flash loaders
Spencer Oliver [Fri, 10 Dec 2010 19:37:39 +0000 (19:37 +0000)]
contrib: add source to the cfi flash loaders

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
9 years agocontrib: make sure loaders use correct arch
Spencer Oliver [Thu, 9 Dec 2010 16:42:04 +0000 (16:42 +0000)]
contrib: make sure loaders use correct arch

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
9 years agostm32: add STM32E-EVAL external memory config script
Spencer Oliver [Wed, 8 Dec 2010 17:15:42 +0000 (17:15 +0000)]
stm32: add STM32E-EVAL external memory config script

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
9 years agocfi: disable buffer writes for M29W128G
Spencer Oliver [Wed, 8 Dec 2010 17:11:07 +0000 (17:11 +0000)]
cfi: disable buffer writes for M29W128G

For some reason buffer writes for the M29W128G do not work reliably,
so disable them.

See:
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=504a3e72208fc6a65924426ff5693982590bccdc

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
9 years agocfi: allow optional buffer write support
Spencer Oliver [Wed, 8 Dec 2010 17:07:08 +0000 (17:07 +0000)]
cfi: allow optional buffer write support

Some flash's do not support buffer writes, so we now check
they are supported before trying to use them.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
9 years agocfi: calculate correct timeouts
Spencer Oliver [Wed, 8 Dec 2010 17:04:23 +0000 (17:04 +0000)]
cfi: calculate correct timeouts

The existing code used incorrect timeout values for the various cfi
operations. We now calculate the timeouts and convert to
msecs if necessary.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
9 years agocfi: prefix string hex output
Spencer Oliver [Wed, 8 Dec 2010 16:57:44 +0000 (16:57 +0000)]
cfi: prefix string hex output

Add hex prefix so we know output is not decimal.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
9 years agocfi: add time format to cfi query output
Spencer Oliver [Wed, 8 Dec 2010 10:57:36 +0000 (10:57 +0000)]
cfi: add time format to cfi query output

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
9 years agocfi: whitespace and long line cleanup
Spencer Oliver [Wed, 8 Dec 2010 10:14:15 +0000 (10:14 +0000)]
cfi: whitespace and long line cleanup

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
9 years agoFix for segmentation fault from freed memory access in jtag_unregister_event_callback()
Paul Richards [Wed, 8 Dec 2010 06:48:55 +0000 (15:48 +0900)]
Fix for segmentation fault from freed memory access in jtag_unregister_event_callback()

9 years agoremove srst_pulls_trst from LPC2xxx target scripts
Freddie Chopin [Sat, 4 Dec 2010 14:45:40 +0000 (15:45 +0100)]
remove srst_pulls_trst from LPC2xxx target scripts

LPC2xxx do not require reset_config srst_pulls_trst. This can cause various "strange" problems when flashing the chip, because "reset halt" actually allows the chip to run for some short period of time and execute some code.

Signed-off-by: Freddie Chopin <freddie_chopin@op.pl>
9 years agobuild: fix build from previous commit
Spencer Oliver [Wed, 8 Dec 2010 19:54:10 +0000 (19:54 +0000)]
build: fix build from previous commit

commit 740b9e25b410c164e661d0334a9ea4168406726b broke the drivers
for ftdi and parport due to retval already being defined.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
9 years agojtag: getting the JTAG speed can fail
Øyvind Harboe [Mon, 6 Dec 2010 08:21:23 +0000 (09:21 +0100)]
jtag: getting the JTAG speed can fail

If the JTAG speed has not been set, then it has no defined
value, add code to propagate the error.

No change to actual behavior as no new failure paths have
been introduced. This is a no-op patch to make subsequent patches
smaller.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
9 years agosvf: various improvements
Andrew Leech [Mon, 6 Dec 2010 21:05:56 +0000 (08:05 +1100)]
svf: various improvements

* added support for targeting particular tap
* improved file reading
* improved command line parsing
* added progress meter
* more readable time measurement output

9 years agolpc2478 target config: CCLK as (mandatory) parameter
Rolf Meeser [Fri, 3 Dec 2010 13:10:40 +0000 (14:10 +0100)]
lpc2478 target config: CCLK as (mandatory) parameter

9 years agoxscale: trace buffer remains enabled until explicitly disabled
Mike Dunn [Thu, 2 Dec 2010 19:08:28 +0000 (11:08 -0800)]
xscale: trace buffer remains enabled until explicitly disabled

Hi everyone,

Since a call went out for patches... been sitting on this for months.  For some
reason, the xscale trace buffer is automatically disabled as soon as a break
occurs and the trace data is collected.  This patch was a result of the
frustration of always re-enabling it, or else hitting a breakpoint and checking
the trace data, only to discover that I forgot to re-enable it before resuming.
Don't see why it should work this way.  There is no run-time penalty, AFAIK.

Along the way, I also cleaned up a little by removing the ugly practice of
recording wrap mode by setting the fill count variable to "-1", replacing it
with an enum that records the trace mode.

I've been using this for months.  Comments, criticisms gratefully received.

Mike

Signed-off-by: Mike Dunn <mikedunn@newsguy.com>
9 years agoAdd board config for Embedded Artists LPC2478-32
Rolf Meeser [Fri, 3 Dec 2010 13:03:28 +0000 (14:03 +0100)]
Add board config for Embedded Artists LPC2478-32

9 years agoFix flash name in Hitex LPC2929 board config
Rolf Meeser [Fri, 3 Dec 2010 12:54:47 +0000 (13:54 +0100)]
Fix flash name in Hitex LPC2929 board config

9 years agoFix sector layout for 504-KiB LPC2000 devices
Rolf Meeser [Fri, 3 Dec 2010 13:06:11 +0000 (14:06 +0100)]
Fix sector layout for 504-KiB LPC2000 devices

9 years agostm32: set default soft reset config
Spencer Oliver [Thu, 2 Dec 2010 13:12:48 +0000 (13:12 +0000)]
stm32: set default soft reset config

If no srst is configured then default to using sysresetreq to
reset the target.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
9 years agoluminary: remove unused config cmds.
Spencer Oliver [Thu, 2 Dec 2010 13:11:08 +0000 (13:11 +0000)]
luminary: remove unused config cmds.

Due to commit e40aee2954d2beabe1d8c530d9ff1e564fb01f48 we now honour the
targets 'reset_config' setting. Previously we ignored the srst setting
for luminary targets.

Luminary targets have never supported using srst to reset into debug mode
so remove the option from the target configs files.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
9 years agocortex_m3: change cortec_m3 reset_config behaviour
Spencer Oliver [Thu, 2 Dec 2010 12:58:50 +0000 (12:58 +0000)]
cortex_m3: change cortec_m3 reset_config behaviour

Currently the cmd 'cortex_m3 reset_config' will overide the default
target's 'reset_config'.
Chnage the behaviour to use the target 'reset_config' if configured and
fallback if not.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
9 years agoconfig: fix luminary jtag config
Spencer Oliver [Thu, 2 Dec 2010 22:01:44 +0000 (22:01 +0000)]
config: fix luminary jtag config

When this config was updated in commit e3773e3e3d1f1ee0dbb0b69e8babe8419784d1c1
the old jtag declaration was not removed.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
9 years agorename some target scripts to be consistent with the rest
Freddie Chopin [Wed, 1 Dec 2010 21:55:56 +0000 (22:55 +0100)]
rename some target scripts to be consistent with the rest

Rename Atmel target scripts which had wrong name ("at91" missing for ARM7 AT91SAM7..., "at" missing for AVR ATmega...)

Signed-off-by: Freddie Chopin <freddie_chopin@op.pl>
9 years agoprofile: use 100Hz as a default sampling frequency
Øyvind Harboe [Wed, 1 Dec 2010 14:28:56 +0000 (15:28 +0100)]
profile: use 100Hz as a default sampling frequency

it's a lie that is somewhere in the vicinity of the
truth. Certainly 64MHz confuses gprof and produces
zero output and no error messages.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
9 years agolpc2900.c: Improve debug output for device probing
Rolf Meeser [Wed, 1 Dec 2010 07:28:43 +0000 (08:28 +0100)]
lpc2900.c: Improve debug output for device probing

9 years agolpc2900.c: Add support for new device LPC2926
Rolf Meeser [Wed, 1 Dec 2010 07:22:29 +0000 (08:22 +0100)]
lpc2900.c: Add support for new device LPC2926

9 years agoLPC2900: Avoid false positive reprobing if first probing fails
Rolf Meeser [Sat, 27 Nov 2010 22:09:59 +0000 (23:09 +0100)]
LPC2900: Avoid false positive reprobing if first probing fails