Alan Bowman [Wed, 11 May 2011 11:12:07 +0000 (12:12 +0100)]
Correct stacking direction and use of address offset
Michel Jaouen [Mon, 9 May 2011 15:30:55 +0000 (17:30 +0200)]
cortex a : smp doc update
Øyvind Harboe [Wed, 4 May 2011 05:14:06 +0000 (07:14 +0200)]
beagleboard: add support for various icepick versions
The beagleboard icepick jtag tap id's vary.
Jonas Hoerberg [Thu, 5 May 2011 08:02:21 +0000 (08:02 +0000)]
at91rm9200-ek: add low default communication speed
Alexandre Pereira da Silva [Wed, 27 Apr 2011 12:21:40 +0000 (09:21 -0300)]
Add support for the lpc2460 target
Alexandre Pereira da Silva [Wed, 27 Apr 2011 12:19:55 +0000 (09:19 -0300)]
Make the lpc2xxx generic driver support romless parts
Jie Zhang [Tue, 3 May 2011 18:43:22 +0000 (14:43 -0400)]
Remove useless MIPS code in avr32_ap7k.c.
Jonas Hörberg [Thu, 28 Apr 2011 07:17:57 +0000 (09:17 +0200)]
adapter speed: require init script setting and centralize activation from drivers to core.c
Signed-off-by: Jonas Hörberg <jhorberg@sauer-danfoss.com>
Øyvind Harboe [Thu, 28 Apr 2011 20:17:48 +0000 (22:17 +0200)]
ecos: add 64 bit types for sprintf/sscanf
Michel Jaouen [Tue, 19 Apr 2011 07:39:21 +0000 (09:39 +0200)]
u8500.cfg : ste u8500 support
Michel Jaouen [Tue, 19 Apr 2011 07:36:41 +0000 (09:36 +0200)]
gdb_server : 'R' command replied by OK
Michel Jaouen [Tue, 19 Apr 2011 06:50:00 +0000 (08:50 +0200)]
cortex_a : smp support
Conflicts:
src/target/cortex_a.c
Michel Jaouen [Tue, 19 Apr 2011 06:43:33 +0000 (08:43 +0200)]
smp : infra for smp minimum support
Øyvind Harboe [Wed, 27 Apr 2011 21:02:28 +0000 (23:02 +0200)]
cfi: leave check on whether target is running to target_write_memory()
there was a check in clearing the status register that
called exit() if the target was running. target_write_memory()
has such a check and will report the error correctly.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
SimonQian [Sun, 24 Apr 2011 15:35:27 +0000 (23:35 +0800)]
add STM32F2 revY
SimonQian [Sun, 24 Apr 2011 15:33:53 +0000 (23:33 +0800)]
remove read of flash_size in STM32F2
Damjan Marion [Thu, 21 Apr 2011 20:07:03 +0000 (22:07 +0200)]
buspirate: fix building on some OSes
Michel Jaouen [Mon, 18 Apr 2011 15:43:51 +0000 (17:43 +0200)]
rtos : compilation error on amd64
Alexandre Pereira da Silva [Tue, 12 Apr 2011 15:56:28 +0000 (12:56 -0300)]
Fix non cfi x16 nor flash connected to x8 bus. The ids in the table should be masked before comparison.
Alexandre Pereira da Silva [Tue, 12 Apr 2011 16:06:13 +0000 (13:06 -0300)]
Make the LPC32xx nand driver support up to 5 address cycles. This will only work in the SLC driver.
Alexandre Pereira da Silva [Tue, 12 Apr 2011 13:56:56 +0000 (10:56 -0300)]
Make the LPC32xx slc nand driver the default
Øyvind Harboe [Wed, 13 Apr 2011 19:51:42 +0000 (21:51 +0200)]
jtag: clarify jtag->init() and jtag->quit() definitions
only set jtag global pointer if jtag->init() succeeds. Less code,
more clear what the rules are.
Fix nit that error value from init() was not propagated unmodified.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Broadcom Corporation (Evan Hunter) [Thu, 14 Apr 2011 08:25:01 +0000 (10:25 +0200)]
RTOS Thread awareness support wip
- works on Cortex-M3 with ThreadX and FreeRTOS
Compared to original patch a few nits were fixed:
- remove stricmp usage
- unsigned compare fix
- printf formatting fixes
- fixed a bug with overrunning a memory buffer allocated with malloc.
Spencer Oliver [Wed, 13 Apr 2011 16:04:34 +0000 (17:04 +0100)]
pic32: update pic32mx flash driver
Update devices as per the latest programming manual.
We now use the full DEVID to identify the target. Previously we used
a 8bit id but that has now been changed in the manual.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Luca Ellero [Wed, 13 Apr 2011 18:55:19 +0000 (18:55 +0000)]
Replace byte-access to memory with faster word-access
Freescale iMX53 doesn't seem to like unaligned accesses to his memory
mapped registers.
Anyway this patch makes dump_image/load_image 4X faster for every
access through APB.
Signed-off-by: Luca Ellero <lroluk@gmail.com>
Luca Ellero [Wed, 13 Apr 2011 18:55:18 +0000 (18:55 +0000)]
Add opcodes for load/store registers words immediate post-indexed
Signed-off-by: Luca Ellero <lroluk@gmail.com>
Luca Ellero [Wed, 13 Apr 2011 18:55:17 +0000 (18:55 +0000)]
Add preliminary support for Freescale iMX53
Signed-off-by: Luca Ellero <lroluk@gmail.com>
Alexandre Pereira da Silva [Wed, 13 Apr 2011 14:50:53 +0000 (11:50 -0300)]
Add the REV A tap id to the LPC3250 configuration
Michel JAOUEN [Tue, 12 Apr 2011 14:48:22 +0000 (16:48 +0200)]
cortex_a :apb mem read/write working with mmu_on
Conflicts:
src/target/cortex_a.c
Michel JAOUEN [Tue, 12 Apr 2011 16:24:50 +0000 (18:24 +0200)]
cortex_a : multiple target on the same dap
Michel JAOUEN [Tue, 12 Apr 2011 16:09:18 +0000 (18:09 +0200)]
cortex_a : use dap ref from armv4_5common
Jean-Christophe PLAGNIOL-VILLARD [Sat, 9 Apr 2011 04:07:41 +0000 (06:07 +0200)]
at91: add at91sam9263 chip register definition
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
Jean-Christophe PLAGNIOL-VILLARD [Sat, 9 Apr 2011 16:06:36 +0000 (18:06 +0200)]
at91: add chip register definition and generic init support
for
- pio
- pmc
- rstc
- wdt
- sdramc
- smc
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
Jean-Christophe PLAGNIOL-VILLARD [Sat, 9 Apr 2011 04:07:42 +0000 (06:07 +0200)]
add at91sam9263-ek support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
Jean-Christophe PLAGNIOL-VILLARD [Sat, 9 Apr 2011 04:07:40 +0000 (06:07 +0200)]
add at91sam9261-ek support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
Jean-Christophe PLAGNIOL-VILLARD [Sat, 9 Apr 2011 04:07:39 +0000 (06:07 +0200)]
at91: add at91sam9261 chip register definition
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
Jean-Christophe PLAGNIOL-VILLARD [Sat, 9 Apr 2011 04:21:57 +0000 (06:21 +0200)]
jlink: jlink_debug_buffer use inline function when _DEBUG_USB_COMMS_ not define
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
Ali Lown [Sun, 3 Apr 2011 21:16:51 +0000 (22:16 +0100)]
Buffering for up to 64 bytes in USB Blaster.
Uses a global buffer.
Add self to acknowledgements.
Ali Lown [Sun, 3 Apr 2011 20:56:14 +0000 (21:56 +0100)]
Add support for LED to USB Blaster code.
Spencer Oliver [Tue, 5 Apr 2011 11:13:48 +0000 (12:13 +0100)]
build: correctly use AC_LANG_PROGRAM
With newer versions of autoconf >= 2.68 we receive warnings about the
incorrect use of AC_LANG_PROGRAM. This fixes those warnings.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Michel JAOUEN [Tue, 5 Apr 2011 16:41:32 +0000 (18:41 +0200)]
cortex_a : implement jtag console for cortex_a
Drasko DRASKOVIC [Mon, 4 Apr 2011 13:33:04 +0000 (15:33 +0200)]
Added mips_ejtag_drscan_32_out() for optimization.
Drasko DRASKOVIC [Mon, 4 Apr 2011 13:24:59 +0000 (15:24 +0200)]
Corrected waiting on PrAcc in wait_for_pracc_rw(). Added necessary check that PrAcc is "1" before FASTDATA access.
Drasko DRASKOVIC [Mon, 4 Apr 2011 11:06:18 +0000 (13:06 +0200)]
Added correct endianess treatment for big endian targets. Now it is possible to use mips_m4k_write_memory() and mips_m4k_read_memory() to correctly set-up SDRAM, as well as bulk data write, which already handled endianess well. Also added correct endianess manipulation in case of fallback from erroneus bulk write to simple write (to avoid byte swapping two times).
Øyvind Harboe [Sat, 2 Apr 2011 07:00:01 +0000 (09:00 +0200)]
pandaboard: use new -dbgbase option to workaround broken ROM table
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Fri, 1 Apr 2011 19:00:44 +0000 (21:00 +0200)]
cortex_a: delete dbgbase hack vestiges
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Michel JAOUEN [Fri, 1 Apr 2011 15:54:28 +0000 (17:54 +0200)]
cortex_a: fix gaffe in first implementation of -dbgbase
Øyvind Harboe [Fri, 1 Apr 2011 11:02:24 +0000 (13:02 +0200)]
Merge remote branch 'origin/master' into HEAD
Øyvind Harboe [Fri, 1 Apr 2011 10:32:41 +0000 (12:32 +0200)]
mips: fix gaffe in previous commit
accidentally invoked return jtag_execute_queue() in the
middle of a fn. Hmm.... I would have expected gcc or
at least lint to catch this.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Fri, 1 Apr 2011 07:59:30 +0000 (09:59 +0200)]
cortex_a: remove broken dbgbase patchup code
the patchup code would get false positives when checking
whether a dbgbase had to be corrected.
The solution is to have autodetect default, with manual override
in scripts.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Phil [Thu, 31 Mar 2011 23:21:53 +0000 (16:21 -0700)]
Added s19 to (fast_)load_image documentation to match the online help.
Øyvind Harboe [Thu, 31 Mar 2011 22:00:39 +0000 (00:00 +0200)]
mips: illustrates how to improve performance
Do not require unecessary roundtrips for clocking out
data.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Thu, 31 Mar 2011 16:37:19 +0000 (18:37 +0200)]
types: write memory now uses const
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Thu, 31 Mar 2011 16:42:10 +0000 (18:42 +0200)]
mips: delete kludgy code that modifies data sent to write_memory()
Could this cause confusion as data sent to write would be flipped
and then if the caller subsequently used the data, e.g. a
compare mismatch might happen?
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Thu, 31 Mar 2011 11:32:28 +0000 (13:32 +0200)]
startup: fix bugs in cleanup upon errors during startup
Importantly adapter cleanup will now happen upon startup failure.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Thu, 31 Mar 2011 21:46:32 +0000 (23:46 +0200)]
mips: mips32_pracc_exec error propagation fixes
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Thu, 31 Mar 2011 21:39:10 +0000 (23:39 +0200)]
mips: mips_ejtag_get_impcode error propagation added
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Thu, 31 Mar 2011 21:31:37 +0000 (23:31 +0200)]
mips: fix mips_ejtag_set_instr error handling
this fn does not fail, it queues data.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Thu, 31 Mar 2011 21:07:55 +0000 (23:07 +0200)]
mips: fix error handling for jtag_execute_queue()
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Thu, 31 Mar 2011 16:46:14 +0000 (18:46 +0200)]
xscale: fix gaffe in phys write
it would *read* instead of *write* to memory
when the MMU was disabled.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Wed, 30 Mar 2011 11:34:50 +0000 (13:34 +0200)]
cortex-a: use -dbgbase option
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Wed, 30 Mar 2011 11:32:47 +0000 (13:32 +0200)]
target: add -dbgbase option to target configuration
Really a Cortex-A specific option, but there is no
system in place to support target specific options
currently and there has been no need for such a system
until now.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Olivier Schonken [Mon, 28 Mar 2011 17:31:17 +0000 (19:31 +0200)]
at91sam3: Modified cidr comparisson to ignore version bits
production processor versions increment, thus the version
bits should be ignored for future proofing. e.g.
Engineering sample version == 0x00, production version 0x01
Øyvind Harboe [Wed, 30 Mar 2011 11:08:39 +0000 (13:08 +0200)]
docs: add HACKING file to help users get started with patches
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Alexandre Pereira da Silva [Tue, 29 Mar 2011 19:19:47 +0000 (16:19 -0300)]
Clarify LPC32XX address cycles message
Hi,
This is a more descriptive message about LPC32XX error, when the nand
chip needs 5 address cycles.
Thanks.
Alexandre Pereira da Silva [Tue, 29 Mar 2011 19:17:11 +0000 (16:17 -0300)]
Add Micron 2GiB nand
Hi,
This will add support for a new nand chip device.
Thanks.
Andrew Lyon [Mon, 28 Mar 2011 10:28:13 +0000 (11:28 +0100)]
bugfix for step <address> mips_m4k
The patch below fixes step <address> on mips_m4k.
Spencer Oliver <spen@spen-soft.co.uk>:
The current code is used on all other arch's - is
there a underlying issue with those aswell ?
Øyvind Harboe [Sun, 27 Mar 2011 21:50:53 +0000 (23:50 +0200)]
command: fix leak when executing commands
found via valgrind, not observed/reported.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Tue, 22 Mar 2011 10:29:10 +0000 (11:29 +0100)]
cortex_a: rename cortex_a8.c/h to cortex_a.c/h
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Tue, 22 Mar 2011 08:21:16 +0000 (09:21 +0100)]
omap4430: tried to add in workaround for broken dbgbase query
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Mon, 21 Mar 2011 13:10:57 +0000 (14:10 +0100)]
cortex a9: merge cortex a9 and a8 code
better to keep this in a single file.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Mon, 21 Mar 2011 13:13:09 +0000 (14:13 +0100)]
omap4430: cortex a9 and a8 are now merged again
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Mon, 21 Mar 2011 12:30:09 +0000 (13:30 +0100)]
zy1000: fix bug in ir scan handling
set cur_instr to BYPASS as optimisation code will
rely on checking the cached value.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Fri, 18 Mar 2011 12:47:17 +0000 (13:47 +0100)]
zy1000: removed JTAG master TCP/IP server
Move ZY1000 OpenOCD driver more in the direction of being
a client to simplify code.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Sun, 20 Mar 2011 18:44:48 +0000 (19:44 +0100)]
dsp563xx_once: fix warning and potential bug
I don't think dsp563xx_once_read_register() would ever
be called with len==0, but it would have been broken in
that case.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Thu, 3 Mar 2011 10:00:14 +0000 (11:00 +0100)]
zy1000: add code to check that SRST asserts
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Mathias K [Thu, 3 Mar 2011 10:01:46 +0000 (11:01 +0100)]
target: allow targets to override memory alignment
Targets can implement read/write_buffer to handle
alignment.
John and Tina Peterson [Thu, 17 Mar 2011 06:34:44 +0000 (07:34 +0100)]
SYS_WRITE0 fix
Problem is, trying to print "Hello, world!\n" just prints endless H's, because r1 is never incremented.
One way to fix it would be to add a "++" after "r1".
Uwe Hermann [Thu, 17 Mar 2011 02:22:12 +0000 (03:22 +0100)]
Fix a bunch of typos.
Fix a bunch of typos.
Most are in code comments, so nothing should break. UNKOWN_COMMAND and
CMD_UNKOWN are not used elsewhere, so correcting the spelling should
also not break anything.
Øyvind Harboe [Mon, 14 Mar 2011 14:32:14 +0000 (15:32 +0100)]
dsp563xx: fix alignment warnings
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Tue, 15 Mar 2011 09:43:45 +0000 (10:43 +0100)]
dsp563xx: fix bug in x buffer handling
found by inspection.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Thu, 3 Mar 2011 09:16:17 +0000 (10:16 +0100)]
zy1000: switch to pthread
pthreads work under Linux and eCos.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Thu, 3 Mar 2011 08:22:25 +0000 (09:22 +0100)]
zy1000: fix JTAG over TCP/IP performance problem
only flush write queue just before waiting for more data,
rather than when fetching more data from the buffer.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Thu, 3 Mar 2011 08:16:11 +0000 (09:16 +0100)]
zy1000: fix incorrect usage of jtag_sleep()
Found by inspection: the correct thing in the context is to use
usleep() rather than jtag_sleep(). Relates to JTAG over TCP/IP
only.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Thu, 3 Mar 2011 08:14:30 +0000 (09:14 +0100)]
jtag: clean up jtag_sleep, handle short sleeps correctly via usleep
short sleeps are handled via usleep, longer sleeps we round up
to nearest ms.
There was a bug in jtag_sleep() in that it would round *down*
to nearest ms, thus making all <1ms sleeps 0. Found by inspection
rather than symptom.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Tue, 15 Mar 2011 08:39:20 +0000 (09:39 +0100)]
zy1000: reduce memory usage for fw upgrade fn
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Aaron Carroll [Wed, 9 Mar 2011 19:39:56 +0000 (06:39 +1100)]
omap4430: add Blaze config
Signed-off-by: Aaron Carroll <aaronc@ok-labs.com>
Aaron Carroll [Wed, 9 Mar 2011 19:39:55 +0000 (06:39 +1100)]
omap4430: force hardware breakpoints for GDB
Soft breakpoints are currently broken if the MMU is enabled due to incorrect
cache flushing. Until this is fixed, force the use of hardware breakpoints.
Signed-off-by: Aaron Carroll <aaronc@ok-labs.com>
Jean-Christophe PLAGNIOL-VILLARD [Mon, 7 Mar 2011 14:11:29 +0000 (15:11 +0100)]
jlink: add Emulator configuration support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
Jean-Christophe PLAGNIOL-VILLARD [Mon, 7 Mar 2011 14:11:28 +0000 (15:11 +0100)]
jlink: add detect hw type
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
Jean-Christophe PLAGNIOL-VILLARD [Mon, 7 Mar 2011 14:11:27 +0000 (15:11 +0100)]
jlink: use tap buffer as 2k
as said in the datasheet Section 3.3.2 Organization of buffers
All buffers are big enough to hold 2 KByte of data.
this will double the speed of download
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
Jean-Christophe PLAGNIOL-VILLARD [Mon, 7 Mar 2011 14:11:26 +0000 (15:11 +0100)]
jlink: add capability dumper and command
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
Mathias K [Thu, 3 Mar 2011 09:28:21 +0000 (10:28 +0100)]
ft2232: fix log message and change log output to debug
Jean-Christophe PLAGNIOL-VILLARD [Wed, 2 Mar 2011 11:57:08 +0000 (12:57 +0100)]
at91: add at91sam9g45 support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
Jean-Christophe PLAGNIOL-VILLARD [Wed, 2 Mar 2011 11:57:07 +0000 (12:57 +0100)]
at91: add at91sam9g10 support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
Jean-Christophe PLAGNIOL-VILLARD [Wed, 2 Mar 2011 11:57:06 +0000 (12:57 +0100)]
at91sam9260: update sram information
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
Jean-Christophe PLAGNIOL-VILLARD [Wed, 2 Mar 2011 11:57:05 +0000 (12:57 +0100)]
at91: add at91sam9263 support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
Jean-Christophe PLAGNIOL-VILLARD [Wed, 2 Mar 2011 11:57:04 +0000 (12:57 +0100)]
at91: add at91sam9261 support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
Jean-Christophe PLAGNIOL-VILLARD [Wed, 2 Mar 2011 11:57:03 +0000 (12:57 +0100)]
at91sam9: factorise cpu support
all at91sam9 are nearly the same except sram and soc name
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
Jean-Christophe PLAGNIOL-VILLARD [Mon, 28 Feb 2011 19:40:47 +0000 (20:40 +0100)]
jlink: add jlink_pid to specify the pid to use
this will allow us to use multiple jlink at the same time as when
the USB-Address is specified the PID change from 0x0101 to
(0x101 + usb_adress)
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)
Code Review / openocd.git / log