openocd.git
6 years agoAllow autoscan up to 64 bit IR lengths 32/832/6
Andreas Fritiofson [Wed, 5 Jun 2013 21:44:42 +0000 (23:44 +0200)]
Allow autoscan up to 64 bit IR lengths

Change-Id: Ib15ff67b57606fe6c7997f3f9bd90e096acd5f3d
Signed-off-by: Evan Hunter <ehunter@broadcom.com>
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/832
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
6 years agoAdd support for 64 bit parameter to irscan 31/831/5
Evan Hunter [Tue, 23 Oct 2012 20:53:55 +0000 (07:53 +1100)]
Add support for 64 bit parameter to irscan

Change-Id: I89e0422456c59ee86c4b6d9bd3b3ad32051b31ac
Signed-off-by: Evan Hunter <ehunter@broadcom.com>
Reviewed-on: http://openocd.zylin.com/831
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
6 years agodrivers/jtag: usb_blaster add pin controls 48/1448/8
Robert Jarzmik [Sun, 16 Jun 2013 18:22:30 +0000 (20:22 +0200)]
drivers/jtag: usb_blaster add pin controls

Add pin controls (pin6 and pin8). These pins can be
controled either :
 - with a fixed value (0 or 1)
 - by TRST or SRST reset signal (driven low when signal
 activated).

Change-Id: Ie6a3e57fc6ba6a38fdb9a009c976e3febab8f578
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Reviewed-on: http://openocd.zylin.com/1448
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Tested-by: jenkins
6 years agoflash/nor/spi: uniform all hex data to lowercase 53/1453/2
Antonio Borneo [Fri, 21 Jun 2013 13:30:01 +0000 (21:30 +0800)]
flash/nor/spi: uniform all hex data to lowercase

Change-Id: I3daee7218283e521bf490993dba02a8658540951
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/1453
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
6 years agoflash/nor/spi: add flash Micron n25q064 52/1452/2
Antonio Borneo [Fri, 21 Jun 2013 13:27:56 +0000 (21:27 +0800)]
flash/nor/spi: add flash Micron n25q064

Change-Id: Ic39bb6d020767cece2eaa4e194071be8b002ece4
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/1452
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
6 years agoBus Pirate driver: Small assorted fixes. 37/1437/2
R. Diez [Sat, 8 Jun 2013 14:07:28 +0000 (16:07 +0200)]
Bus Pirate driver: Small assorted fixes.

Fixes are:
- Discard any stale data from the previous connection.
- Disable CR/LF translation on the (virtual USB) serial port.
- Increase the average USB packet size. The 1 KiB buffer was underutilised.
- Option "buspirate_speed fast" now works out of the box.
- Some extra comments, error checking, etc.

Change-Id: I72c49d943a8ce9c5e5d1644ef90cb1482f93c618
Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de>
Reviewed-on: http://openocd.zylin.com/1437
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
6 years agostm32f2x: Correct calculation of number of 128k sectors. 50/1450/2
Andreas Fritiofson [Wed, 19 Jun 2013 21:28:26 +0000 (23:28 +0200)]
stm32f2x: Correct calculation of number of 128k sectors.

Fixes regression introduced in 9785f51f that caused write outside
allocated memory during probe of devices with <1024K flash.

Reported-by: Alexander Pakhomov <ker0sin@yandex.ru>
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Change-Id: Ifba8833e436064624efbf678162538fd351a5702
Reviewed-on: http://openocd.zylin.com/1450
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
6 years agobuild: add missing configure quotes 45/1445/2
Spencer Oliver [Fri, 14 Jun 2013 19:59:30 +0000 (20:59 +0100)]
build: add missing configure quotes

Change-Id: I14abb24292d4c2ff088c7b95773f73ceac3287cd
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1445
Tested-by: jenkins
6 years agobuild: fix incorrect configure quotes 44/1444/2
Spencer Oliver [Fri, 14 Jun 2013 19:58:48 +0000 (20:58 +0100)]
build: fix incorrect configure quotes

Change-Id: I427035df1ab2bfb2ec6ac8fafc9683f7d3e3bf06
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1444
Tested-by: jenkins
6 years agohla: Add Simulated DCC register for target communicaton 64/1364/3
Brent Roman [Fri, 26 Apr 2013 00:51:51 +0000 (17:51 -0700)]
hla: Add Simulated DCC register for target communicaton

Change-Id: I193be169059caba661e46de8081d7e92f92cafee
Signed-off-by: Brent Roman <brent@mbari.org>
Reviewed-on: http://openocd.zylin.com/1364
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
6 years ago[RFC] mips: Enable bulk write optimization for all writes 15/1215/5
Andreas Fritiofson [Sat, 9 Mar 2013 09:44:07 +0000 (10:44 +0100)]
[RFC] mips: Enable bulk write optimization for all writes

mips_m4k_bulk_write_memory was only called from target_write_buffer as an
optimization when the word count was large enough.

Remove mips_m4k_bulk_write_memory from the target type, causing the default
implementation to call the regular mips_m4k_write_memory instead.

Perform the dispatch to bulk write in mips_m4k_write_memory, enabling the
optimization for target_write_memory() writes with size 4, in addition to
target_write_buffer() writes.

It also enables making the choice of bulk write vs regular write
specifically for the architecture and not relying on the generic target
code to make a sensible decision.

Change-Id: I295f21a67ceaa195802403f2518ea2e0a025c1c7
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/1215
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Tested-by: jenkins
6 years agocfg: add stm32 flash driver alias 28/1428/2
Spencer Oliver [Thu, 30 May 2013 09:54:54 +0000 (10:54 +0100)]
cfg: add stm32 flash driver alias

This will enable the user to use either name when calling flash driver cmds.

For example the stm32f3x family use the same flash driver as the stm32f1x, so
the user has to use 'stm32f1x mass_erase 0' which can be confusing.
Now the user can also use 'stm32f3x mass_erase 0' with the same result.

Change-Id: I14280674c8dfa2ce1c01e327af7f38e36150462c
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1428
Tested-by: jenkins
6 years agostm32w: add STM32w108xx generic configuration 39/1439/4
Giuseppe Barba [Sun, 9 Jun 2013 16:28:16 +0000 (18:28 +0200)]
stm32w: add STM32w108xx generic configuration

Add generic TCL configuration for STM STM108Wxx chips.

Change-Id: I981cdccb78833f442c3be4188c8c023064067e4e
Signed-off-by: Giuseppe Barba <giuseppe.barba@gmail.com>
Reviewed-on: http://openocd.zylin.com/1439
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
6 years agostm32: add new stm32f0 device id 35/1435/2
Spencer Oliver [Thu, 6 Jun 2013 08:53:26 +0000 (09:53 +0100)]
stm32: add new stm32f0 device id

updated from RM0091 rev4.

Change-Id: Ic5e46229b85ce3974ef3016724d29a94037ac577
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1435
Tested-by: jenkins
6 years agocortex_a: remove memory leak on failure 33/1433/2
Spencer Oliver [Wed, 5 Jun 2013 19:19:11 +0000 (20:19 +0100)]
cortex_a: remove memory leak on failure

If mem_ap_sel_write_atomic_u32 fails then tmp_buff may not be released.
Detected by clang.

Change-Id: I3d5416bd47d0eea61f61ec02ac5e43c82f114108
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1433
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
6 years agostr9: ignore boundary scan version 36/1436/2
Spencer Oliver [Fri, 7 Jun 2013 14:52:20 +0000 (15:52 +0100)]
str9: ignore boundary scan version

Ignore version of Boundary Scan TAP in newer revisions of the str9.

Change-Id: I6e205f8c731f07078c469e686025857c180f3a6d
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1436
Tested-by: jenkins
6 years agoChange variable scope. 41/1441/2
Jim Norris [Wed, 12 Jun 2013 01:42:08 +0000 (20:42 -0500)]
Change variable scope.

Change scope of the variable gdb_reg_list_idx from global to module.

Change-Id: Ib8273c0769c11c1d5a338e4711efbddb8e8a0243
Signed-off-by: Jim Norris <u17263@att.net>
Reviewed-on: http://openocd.zylin.com/1441
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
6 years agoconfigure: remove --enable-libusb0 option, rework libusb selection 34/1434/6
Paul Fertser [Mon, 3 Jun 2013 20:07:07 +0000 (00:07 +0400)]
configure: remove --enable-libusb0 option, rework libusb selection

This makes libusb handling more consistent: if any driver requires
libusb, first check for libusb-1 availability, if not found and
libusb0 is ok for this case, try libusb0.

A user-visible bug fixed by this is that when a user was selecting a
driver that required libusb-1 but was lacking the necessary dev files
or libraries, configure didn't complain (but the build was failing of
course).

--enable-stlink doesn't really require libusb-1 but since it's using the
same automake symbol HLAADAPTER, ti_icdi is getting built too which needs
libusb1 unconditionally. Since using libusb-0.1 makes little sense anyway,
leave that as is.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Change-Id: I630a4ad9e4583743d45b2233bf5d8f4e5c0aab82
Reviewed-on: http://openocd.zylin.com/1434
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
6 years agolibusb1_common, ftdi: clarify libusb_open error message 30/1430/6
Paul Fertser [Fri, 31 May 2013 10:57:56 +0000 (14:57 +0400)]
libusb1_common, ftdi: clarify libusb_open error message

Print a user-friendly message when libusb_open() fails, e.g.
Error: libusb_open() failed with LIBUSB_ERROR_ACCESS
when there's a permissions problem.

Also output a configure warning if libusb older than 1.0.9 is detected.

Change-Id: I800f71f06672fe06c0a98a4e469f853b5021bcfe
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1430
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
6 years agoftdi: config for TUMPA 38/1438/2
Paul Fertser [Sat, 8 Jun 2013 15:15:48 +0000 (19:15 +0400)]
ftdi: config for TUMPA

Add a config file for TIAO USB Multi-Protocol Adapter.

Based on schematics from http://www.mediafire.com/?zv158nnx1gv0cy2

Cc: Volkan K <volkan-k@users.sourceforge.net>
Change-Id: I0dfd93b0b1e558e4ccd7c94c005c099947ec94df
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1438
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
6 years agobuild: fix incorrect GPL address from last commit 40/1440/2
Spencer Oliver [Mon, 10 Jun 2013 09:47:49 +0000 (10:47 +0100)]
build: fix incorrect GPL address from last commit

962b3eb40cc5b69d9b3d6fcc4c5d56c4d204a307 included the old GPL address.

Change-Id: I7affbdc3fc1c9251ea90796ab9eeef4d56ba4308
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1440
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
6 years agoAdd BCM2835 (as found in Raspberry Pi) interface driver 58/758/11
Paul Fertser [Sun, 22 Jul 2012 13:28:02 +0000 (17:28 +0400)]
Add BCM2835 (as found in Raspberry Pi) interface driver

This adds support for JTAG programming by bitbanging GPIOs exposed on
the RaspberryPi's expansion header.

Tested by connecting directly to an STM32VLDiscovery board, without any
additional circuity. I observed maximum about 4MHz on the TCK pin with an
old analogue 'scope and about 100kHz when setting the speed to 100kHz.
Busyloop waiting is needed because even with a single 0ns nanosleep call
(with FIFO priority) it lowers the TCK speed to ~30kHz which is way too low
to be useful.

The speed testing with adapter_khz 2000 gave the following results:
sudo chrt -f 1 nice -n -19 ./src/openocd \
     -f interface/raspberrypi-native.cfg \
     -c "set WORKAREASIZE 0x2000" \
     -f target/stm32f1x.cfg -c "adapter_khz 2000"

wrote 131072 bytes from file random.bin in 3.973677s (32.212 KiB/s)
dumped 131072 bytes in 1.445699s (88.538 KiB/s)

This is 3.7 times faster for writing and 14.3 times faster for reading
compared to the generic sysfsgpio driver; probably the writing speed is
limited by the target itself here and reading speed might be considerably
higher too with appropriate connection and a capable target.

BCM2835 name is choosen over BCM2708 because the published peripherals
datasheet uses the particular model name and not family name.

Change-Id: Ib78168be27f53c2a3c88c3dd8154d1190c318c78
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/758
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
6 years agoupdate files to correct FSF address 26/1426/4
Spencer Oliver [Sun, 2 Jun 2013 19:32:36 +0000 (20:32 +0100)]
update files to correct FSF address

Change-Id: I429f7fd51f77b0e7c86d7a7f110ca31afd76c173
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1426
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
6 years agoAdded OpenJTAG Driver 06/1406/6
Ryan Corbin [Wed, 15 May 2013 17:13:50 +0000 (13:13 -0400)]
Added OpenJTAG Driver

Updated OpenJTAG driver from www.openjtag.org to work with latest version of OpenOCD.

Change-Id: I2917f4e5835fb9ca5265e81dc38515fa97ae9503
Signed-off-by: Ryan Corbin <corbin.ryan@gmail.com>
Reviewed-on: http://openocd.zylin.com/1406
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
6 years agonds32: add new target type nds32_v2, nds32_v3, nds32_v3m 59/1259/14
Hsiangkai Wang [Tue, 5 Feb 2013 03:55:37 +0000 (11:55 +0800)]
nds32: add new target type nds32_v2, nds32_v3, nds32_v3m

Add target code for Andes targets.

Change-Id: Ibf0e1b61b06127ca7d9ed502d98d7e2aeebbbe82
Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com>
Reviewed-on: http://openocd.zylin.com/1259
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
6 years agoaice: add Andes AICE support 56/1256/13
Hsiangkai Wang [Tue, 5 Feb 2013 01:34:18 +0000 (09:34 +0800)]
aice: add Andes AICE support

Andes AICE uses USB to transfer packets between OpenOCD and AICE.
It uses high-level USB commands to control targets instead of using
JTAG signals. I define an interface as aice_port_api_s. It contains
all basic operations needed by target-dependent code.

Change-Id: I117bc4f938fab2732e44c509ea68b30172d6fdb9
Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com>
Reviewed-on: http://openocd.zylin.com/1256
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
6 years agodrivers/jtag: rewrite usb_blaster driver 67/467/11
Robert Jarzmik [Sun, 14 Apr 2013 20:23:18 +0000 (22:23 +0200)]
drivers/jtag: rewrite usb_blaster driver

Rewrite the Altera USB Blaster dongle driver :

 - make extensive use of byte-shift mode, to improve JTAG
   speed.
   This is the main reason of the rewrite. It improves the
   memory dumps with a factor 3 at least, and upload 100
   times, from 1 kBytes/sec to 100 kBytes/sec with a
   USB-Blaster connected to an Altera Virtual JTAG TAP +
   OpenRISC CPU.

 - split the low level API part (between FTDI and FTD2xx)
 from core driver, so that in the future, if both libftdi
 and ftd2xx can coexist, the driver will be able to switch
 dynamically from one access to the other.

Change-Id: I2ee9cedf4a5eb27501f337993ee0cdee52517e7c
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Marek Czerski <ma.czerski@gmail.com>
Tested-by: Franck Jullien <franck.jullien@gmail.com>
Reviewed-on: http://openocd.zylin.com/467
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-by: Alexandre Becoulet <alexandre.becoulet@free.fr>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
6 years agocortex_m: print 'Cortex-M' rather than 'Cortex-M3' 29/1429/2
Spencer Oliver [Thu, 30 May 2013 10:33:27 +0000 (11:33 +0100)]
cortex_m: print 'Cortex-M' rather than 'Cortex-M3'

This file is used by all the Cortex-M family not just Cortex-M3.

Change-Id: Ie8680535b220c66bb8fcd862510407a46a73e8a0
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1429
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
6 years agocortex_a: fix FTBS on ARM due to alignment issues 69/1369/4
Andreas Fritiofson [Sun, 5 May 2013 19:04:25 +0000 (21:04 +0200)]
cortex_a: fix FTBS on ARM due to alignment issues

Native compilation on RaspberryPi with
gcc (Debian 4.6.3-1) 4.6.3
Target: arm-linux-gnueabi

ends with error:

cortex_a.c: In function 'cortex_a8_read_apb_ab_memory':
cortex_a.c:2063:40: error: cast increases required alignment of target type [-Werror=cast-align]
cc1: all warnings being treated as errors

Also check for malloc failure.

This patch is compile-tested only.

Change-Id: I580c505424d03ac3a565de54182db22277c52ac1
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/1369
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
6 years agorlink: fix speed table generation 31/1431/2
Paul Fertser [Sun, 2 Jun 2013 09:28:37 +0000 (13:28 +0400)]
rlink: fix speed table generation

The speed table generation (by using explicit
make -f Makefile.rlink) was broken since
865efd828a267992db0f2a92a731c5ce23a34236 Dec 2 2009 which did a bunch of
renaming and included hand-editing of a generated rlink_speed_table.c file.

This patch is compile-tested, i.e. the new generated rlink_speed_table.c
links fine with the rlink driver.

Change-Id: I1789a2f2f5bf20183b772d55c55fe68a0bd05cf5
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1431
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
6 years agouser guide: Update the ZY1000 description. 57/1357/3
William M.A. Traynor [Mon, 22 Apr 2013 18:49:30 +0000 (14:49 -0400)]
user guide: Update the ZY1000 description.

As per request from Peter at Ultimate Solutions, updated the
description of the ZY100 Stand-alone JTAG probe.

Signed-off-by: Bill Traynor <wmat@alphatroop.com>
Change-Id: Ia5c0b9a7261becd524a02aba1b22a98a2e09a4c9
Signed-off-by: William M.A. Traynor <wmat@alphatroop.com>
Reviewed-on: http://openocd.zylin.com/1357
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
6 years agotools: add sample remote_bitbang sysfsgpio server 03/1403/5
Paul Fertser [Thu, 9 May 2013 09:22:20 +0000 (13:22 +0400)]
tools: add sample remote_bitbang sysfsgpio server

This adds a sample server that implements remote_bitbang protocol,
based on sysfsgpio interface driver.

Change-Id: I17633e91f819ab7b806606e1a1c38d5366ab4598
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1403
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
6 years agocortex_m, hla_target: do not try asserting SRST if it's not present 05/1405/3
Paul Fertser [Sat, 11 May 2013 11:55:20 +0000 (15:55 +0400)]
cortex_m, hla_target: do not try asserting SRST if it's not present

This should cover all the cases when RESET_SRST_NO_GATING is set
without RESET_HAS_SRST. This might happen when RESET_SRST_NO_GATING is
automatically set by a target code (and not from tcl).

However, there're some other places (mips_m4k, arm7_9_common) where
adding RESET_SRST_PULLS_TRST would lead to trying to use SRST even if
it's not present. Currently it's impossible for the user to enable
that flag without enabling SRST.

Change-Id: Ib1c6f68feed0b8057d55afd5f260bb22ab332ced
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1405
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
6 years agointerface/ftdi: remove "untested" warning from DP Busblaster 19/1419/2
Paul Fertser [Mon, 20 May 2013 09:25:57 +0000 (13:25 +0400)]
interface/ftdi: remove "untested" warning from DP Busblaster

This is reported as working by mitsakos on IRC.

Change-Id: I26b97779c3e8e237c5b3996aa81183031b12ec0c
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1419
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
6 years agotargets: fix target_type name for Cortex-A targets 20/1420/4
Paul Fertser [Thu, 23 May 2013 11:20:45 +0000 (15:20 +0400)]
targets: fix target_type name for Cortex-A targets

Commit d9ba56c295f057e716519a798bf9cdb4898c24f4 did a bunch of
renaming of cortex_a8 to cortex_a, including the names in config
files. However that introduced a regression as the name in target_type
struct remained unchanged.

This adds the last missing bit: actual renaming of the target name as
understood by OpenOCD.

Also change the (hopefully) last instance of using it in the supplied
config files, namely from imx6.cfg.

Change-Id: Ib9289fc6d946630133ec6e36c20015ccb50acf61
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1420
Tested-by: jenkins
Reviewed-by: Chris Johns <chrisj@rtems.org>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
6 years agoremote_bitbang: De-duplicate init code and clean up on error 80/1380/3
Andreas Fritiofson [Sun, 5 May 2013 22:09:03 +0000 (00:09 +0200)]
remote_bitbang: De-duplicate init code and clean up on error

Change-Id: I8be413a9e1683f96f835232f9ff25d9bd42099de
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/1380
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
6 years agoremote_bitbang: Convert to use getaddrinfo() 79/1379/3
Andreas Fritiofson [Sun, 5 May 2013 21:58:32 +0000 (23:58 +0200)]
remote_bitbang: Convert to use getaddrinfo()

Since gethostbyname() is deprecated and inconvenient, rewrite to use
getaddrinfo() using an implementation more or less copied from its man
page. This automatically enables support for IPv6.

This also fixes a FTBFS on ARM due to alignment issues.

Change-Id: I990a49506cac4b26faf77587937e506138371f7c
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/1379
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
6 years agoAdded functionality to the SYS_SYSTEM semihosting call. 45/1345/5
Brandon Warhurst [Thu, 18 Apr 2013 18:05:26 +0000 (14:05 -0400)]
Added functionality to the SYS_SYSTEM semihosting call.

There seems to be a few missing semihosting calls.  I
am not sure why this one is actually missing, since it
seems simple enough to implement.  It was tested using
an HTC HD7 connected to openocd through a "home brew"
ftdi 4232H board.

Change-Id: Ie17dc96c6d48227a3dc9ff1e21201a85498a10b1
Signed-off-by: Brandon Warhurst <roboknight@gmail.com>
Reviewed-on: http://openocd.zylin.com/1345
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
6 years agoAdded: RTOS awareness for embKernel 34/1334/2
Ravaz [Tue, 16 Apr 2013 23:18:16 +0000 (01:18 +0200)]
Added: RTOS awareness for embKernel

Change-Id: I98b60f50a5fc486bda83b83ad7ec73826ee11607
Signed-off-by: Ravaz <embkernel@gmail.com>
Reviewed-on: http://openocd.zylin.com/1334
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
6 years agostm32 configs: use 4kB working area size by default 78/1378/3
Paul Fertser [Sat, 4 May 2013 21:09:15 +0000 (01:09 +0400)]
stm32 configs: use 4kB working area size by default

This is needed for configs that might be used with the cheapest
STM32F100 parts that have only 4kB SRAM.

Restrictions for the other STM32 families are verified to be set
appropriately.

Change-Id: I1ad2370435015604db9f27c1a76c153480311a28
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1378
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
6 years agotelnet_server: support C-p, C-n for moving through history 76/1376/2
Paul Fertser [Fri, 3 May 2013 13:19:43 +0000 (17:19 +0400)]
telnet_server: support C-p, C-n for moving through history

This modifies telnet server to allow using common readline combinations to
move up/down history, without the need to touch cursor keys.

Change-Id: Ib659075883e91794b44f391f7c29bbdfdd679d10
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1376
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
6 years agoefm32: fix FTBFS on ARM due to alignment issues 70/1370/2
Paul Fertser [Mon, 29 Apr 2013 19:31:50 +0000 (23:31 +0400)]
efm32: fix FTBFS on ARM due to alignment issues

The following warnings prevent OpenOCD from building:
efm32.c: In function 'efm32x_read_lock_data':
efm32.c:373:8: error: cast increases required alignment of target type [-Werror=cast-align]
efm32.c:386:9: error: cast increases required alignment of target type [-Werror=cast-align]
efm32.c:394:9: error: cast increases required alignment of target type [-Werror=cast-align]
efm32.c:402:9: error: cast increases required alignment of target type [-Werror=cast-align]
efm32.c: In function 'efm32x_get_page_lock':
efm32.c:430:17: error: cast increases required alignment of target type [-Werror=cast-align]
efm32.c: In function 'efm32x_set_page_lock':
efm32.c:441:19: error: cast increases required alignment of target type [-Werror=cast-align]
cc1: all warnings being treated as errors

This patch is compile-tested only.

Change-Id: Ia3a8f342e0f5e30c8ea4de9435c5c7a80bc100e3
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1370
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
6 years agosysfsgpio: do not try to initialise absent signals 75/1375/2
Paul Fertser [Fri, 3 May 2013 08:49:07 +0000 (12:49 +0400)]
sysfsgpio: do not try to initialise absent signals

When e.g. SRST is not specified, the current code results in assigning 0 to
srst_fd and subsequently a stray '1' is output on screen on reset.

Avoid this by not doing bogus initialisation.

Change-Id: Iadb847a384a927ae746124cf6e4e3c6cc8b11406
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1375
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
6 years agojtag/adapter: add connect_[de]assert_srst to reset_config usage 77/1377/2
Paul Fertser [Sat, 4 May 2013 16:05:41 +0000 (20:05 +0400)]
jtag/adapter: add connect_[de]assert_srst to reset_config usage

Add the connect under reset options to the online help for
reset_config.

Change-Id: I4b9a87b234de01531390b39b898a848841d1e834
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1377
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
6 years agogdb_server: remove target_handle_event from gdb event callback 72/1372/2
Hsiangkai Wang [Wed, 1 May 2013 02:23:38 +0000 (10:23 +0800)]
gdb_server: remove target_handle_event from gdb event callback

In target_call_event_callbacks(), it will execute

1. target_handle_event (use Jim_EvalObj() to evaluate event
   statements in config files)
2. call user registered callbacks

Before calling user registered callbacks, target_handle_event has
been executed.  So, there is no need to call target_handle_event()
in gdb event callback.  It will execute event statements in config
files twice.

Change-Id: I84629e324fa3eb909907badf2319b4138ba89f07
Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com>
Reviewed-on: http://openocd.zylin.com/1372
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
6 years agoRestore normal development cycle
Freddie Chopin [Sun, 5 May 2013 08:43:24 +0000 (10:43 +0200)]
Restore normal development cycle

1. Archive NEWS for 0.7.0 release
2. Add new blank NEWS file
3. Bump version to 0.8.0 and restore "-dev" suffix

Change-Id: I21febc042faeed294f3beeb5e683535dbf011e8f
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
6 years agoThe openocd-0.7.0 release. v0.7.0
Freddie Chopin [Sun, 5 May 2013 07:46:23 +0000 (09:46 +0200)]
The openocd-0.7.0 release.

Change-Id: I08157f47ac056e6d2089119dd2d6cbab11b521e8
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
6 years agodoc: add info about FT232H and JTAG-lock-pick Tiny 2 adapter 67/1367/2
Freddie Chopin [Sun, 28 Apr 2013 08:53:13 +0000 (10:53 +0200)]
doc: add info about FT232H and JTAG-lock-pick Tiny 2 adapter

Change-Id: I3b1047580669da3f17ea87183536275a10671fec
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-on: http://openocd.zylin.com/1367
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
6 years agodoc: Update list of interfaces, targets and boards 66/1366/2
Freddie Chopin [Sun, 28 Apr 2013 08:33:22 +0000 (10:33 +0200)]
doc: Update list of interfaces, targets and boards

Change-Id: If9481e061f09a37f9ee3c461a1a0ce4d382a9a0d
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-on: http://openocd.zylin.com/1366
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
6 years agodev-doc: fix to release process docs 68/1368/2
Freddie Chopin [Sun, 28 Apr 2013 11:33:16 +0000 (13:33 +0200)]
dev-doc: fix to release process docs

Change-Id: I916e7ff1af211baef1c6d56fd44d292ee6983599
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-on: http://openocd.zylin.com/1368
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
6 years agocfg: remove whitespace 74/1374/2
Spencer Oliver [Thu, 2 May 2013 15:04:45 +0000 (16:04 +0100)]
cfg: remove whitespace

Change-Id: I20edbb50efc03711195102f4c6dc8bcfaf043d44
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1374
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
6 years agocfg: ignore ICEPick jrc tap version 73/1373/3
Spencer Oliver [Thu, 2 May 2013 14:53:54 +0000 (15:53 +0100)]
cfg: ignore ICEPick jrc tap version

Due to reports of newer targets using a updated version of the ICEPick tap
rather than add another tapid we ignore the tap version.

Also see Trac 49 for details.

Change-Id: Ic78414c54af2545c817e1bb2c860970c1b587259
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1373
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
6 years agoRestore -dev suffix
Freddie Chopin [Sun, 28 Apr 2013 11:12:40 +0000 (13:12 +0200)]
Restore -dev suffix

Change-Id: I26f49e02d228b59533237607fa8307ecc627409e
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
6 years agoThe openocd-0.7.0-rc2 release candidate. v0.7.0-rc2
Freddie Chopin [Sun, 28 Apr 2013 10:38:42 +0000 (12:38 +0200)]
The openocd-0.7.0-rc2 release candidate.

Change-Id: I0a3576dd098d73437547b619c726cacd8f1dba64
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
6 years agotarget: rename cortex_a8 to cortex_a 30/1130/5
Spencer Oliver [Fri, 1 Feb 2013 15:43:21 +0000 (15:43 +0000)]
target: rename cortex_a8 to cortex_a

Rename cortex_a8 target to use a more correct cortex_a name.
This also adds a deprecated_name var so that older scripts issue a warning
to update the target name.

cfg files have also been updated to the new target name.

Change-Id: I0eb1429c9281321efeb444b27a662a941a2ab67f
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1130
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
6 years agotarget: rename cortex_m3 to cortex_m 29/1129/5
Spencer Oliver [Fri, 1 Feb 2013 15:34:51 +0000 (15:34 +0000)]
target: rename cortex_m3 to cortex_m

Rename cortex_m3 target to use a more correct cortex_m name.
This also adds a deprecated_name var so that older scripts issue a warning
to update the target name.

cfg files have also been updated to the new target name.

Change-Id: Ia8429f38e88da677249c5caa560c50f8ce56ea10
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1129
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
6 years agoMention "lpc4300" (with "lpc1800" alias) flash drivers in manual 52/1352/2
Freddie Chopin [Sat, 20 Apr 2013 09:05:32 +0000 (11:05 +0200)]
Mention "lpc4300" (with "lpc1800" alias) flash drivers in manual

Change-Id: I0bb28910b2c07b1ca5bd644e0d88b931d585d3e7
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-on: http://openocd.zylin.com/1352
Tested-by: jenkins
6 years agocortex_m: remove old target breakpoints/watchpoints 63/1363/2
Spencer Oliver [Thu, 25 Apr 2013 16:13:41 +0000 (17:13 +0100)]
cortex_m: remove old target breakpoints/watchpoints

Sometimes the target may have breakpoint registers set from a previous
debug session, we can either sync them or as we have chosen here clear them.

Change-Id: I439a623ebbf010246a70e5596d04aa7d546da731
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1363
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
6 years agokinetis: fix "SF1" parts to limit FlexRAM usage 58/1358/2
Christopher Kilgour [Tue, 23 Apr 2013 02:08:15 +0000 (19:08 -0700)]
kinetis: fix "SF1" parts to limit FlexRAM usage

Ensure FlexRAM usage is limited to half the FlexRAM size when programming.
Assume the FlexNVM sector size is equal to half the FlexRAM.
Fix sector erase checking which had an error introduced when the
  kinetis_ftfx_command( ) signature was changed.

Change-Id: I88edd9c7d4a4ba474cad7b00052feaeedfa8ced8
Signed-off-by: Christopher Kilgour <techie@whiterocker.com>
Reviewed-on: http://openocd.zylin.com/1358
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
6 years agobuild: fix libftd2xx regression 55/1355/2
Spencer Oliver [Mon, 22 Apr 2013 14:10:56 +0000 (15:10 +0100)]
build: fix libftd2xx regression

Fix build when targeting closed src ftd2xx drivers.
configure is unable to find the dynamic linking loader lib (dl) as it
is included before ftd2xx library.

Change-Id: Ibe7308b66ed846288a31f7a27ff549b6f39baeec
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1355
Tested-by: jenkins
Reviewed-by: Luca Bruno <lucab@debian.org>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
6 years agoarm: fix arm reg regression 62/1362/2
Spencer Oliver [Tue, 23 Apr 2013 11:15:07 +0000 (12:15 +0100)]
arm: fix arm reg regression

Seems commit fc2abe63fd3cea7497da7be2955d333bd3f800b9 caused a regression
in that the arm reg cmd no longer worked. The issue was caused because we
changed the value of ARM_MODE_THREAD which was being checked in arm_init_arch_info.

Change-Id: Id571d4ab336d1b0e2b93363147af245d24b65ca5
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1362
Tested-by: jenkins
Reviewed-by: Luca Bruno <lucab@debian.org>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
6 years agobuild fix: ft2232 59/1359/2
Oleksij Rempel [Mon, 15 Apr 2013 05:57:40 +0000 (07:57 +0200)]
build fix: ft2232

fix build with-ftd2xx-lib

Change-Id: I4a9b5d204c29b7a0714a59494b2b5f959c73f99b
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-on: http://openocd.zylin.com/1359
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
6 years agogdb server: Fix bug. Parse 'M' packet error. 60/1360/2
Hsiangkai Wang [Tue, 23 Apr 2013 10:42:07 +0000 (18:42 +0800)]
gdb server: Fix bug. Parse 'M' packet error.

The format of 'M' packet is 'M addr,length:XX...'. The data
follows ':' immediately. No need to '+2' to SEPARATOR in
unhexify(), because SEPARATOR points to data correctly.

Change-Id: I15b5758b540816cc727752e7bf68cd45e623f603
Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com>
Reviewed-on: http://openocd.zylin.com/1360
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
6 years agoUpdate NEWS 56/1356/2
Spencer Oliver [Mon, 22 Apr 2013 15:59:39 +0000 (16:59 +0100)]
Update NEWS

Change-Id: Icfc1245552a400232988cf44f54e5c46af1db873
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1356
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
6 years agoRestore -dev suffix
Freddie Chopin [Sun, 21 Apr 2013 08:32:58 +0000 (10:32 +0200)]
Restore -dev suffix

Change-Id: I3662c5993766a76d6dd62b919c56cc059c4e50d4
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
6 years agoThe openocd-0.7.0-rc1 release candidate. v0.7.0-rc1
Freddie Chopin [Sun, 21 Apr 2013 07:42:33 +0000 (09:42 +0200)]
The openocd-0.7.0-rc1 release candidate.

Change-Id: I2992c31b56b88062cdd8a8208506a61f6367fcbf
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
6 years agoAdd "lpc1800" alias for "lpc4300" flash driver 51/1351/3
Freddie Chopin [Sat, 20 Apr 2013 08:39:51 +0000 (10:39 +0200)]
Add "lpc1800" alias for "lpc4300" flash driver

Change-Id: I6d2bb9105cc778bd1d21580022529d684c3b21b0
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-on: http://openocd.zylin.com/1351
Tested-by: jenkins
6 years agoflash/nor: add lpc4300 variant to lpc2000 driver 26/1126/5
Matt Dittrich [Tue, 5 Feb 2013 16:53:49 +0000 (10:53 -0600)]
flash/nor: add lpc4300 variant to lpc2000 driver

This patch adds flash programming support for internal flash of the
LPC43x2/3/5/7 part, tested on a LPC4337 (also tested on a LPC1768
and LPC2468). It should also work with LPC1800's with onchip flash.
The "base" parameter of the "flash bank" command is now significant
for the lpc4300 variant and required to determine the bank number
parameter needed by the IAP routines.

NOTE: I could only program flash successfully when the chip is powered
with "P2_7" pulled low to put it in ISP mode.  When running from flash
(and not the ISP ROM), the target fails to halt and the sector erase
fails. This is similar to the behavior I remember when trying out the
spifi driver on a LPC4350... lots of power cycles to make progress, one
To burn, one to run.  So I am not confident my config is set up correctly.

Change-Id: I8a75ef1b95cedd5b5898b2dedff477f502fd19f3
Signed-off-by: Matt Dittrich <mdittrich.dev@gmail.com>
Reviewed-on: http://openocd.zylin.com/1126
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
Tested-by: jenkins
6 years agoImprove HACKING 50/1350/4
Freddie Chopin [Sat, 20 Apr 2013 07:56:06 +0000 (09:56 +0200)]
Improve HACKING

Reword info about creating SSH key - it's not required to add it to
Github account. Mention adding created SSH key to Gerrit account -
without this step it's not possible to access Gerrit in further
steps.

Change-Id: Ibd81521fbe47d4b4beae0b77cdc9d939fd3ee20c
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-on: http://openocd.zylin.com/1350
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
6 years agotelnet: add telnet history support 10/1310/2
Spencer Oliver [Wed, 27 Mar 2013 16:28:31 +0000 (16:28 +0000)]
telnet: add telnet history support

adapted from Yoshinori Sato's patch:
https://github.com/ysat0/openocd/commit/2f07f4600a0da8206612d78c159bbe1171aa41c2

Change-Id: I084b86d316b0aa6e9593f007c024961dbda805e9
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1310
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
6 years agoSupport newer OSBDM firmware 48/1348/2
R. Steve McKown [Fri, 19 Apr 2013 17:29:59 +0000 (11:29 -0600)]
Support newer OSBDM firmware

OSBDM: add new VID:PID implemented in OSJTAG/OSBDM firmware somewhere
between versions 30.13 and 31.21.  PFLASH programming works with this
patch, tested on a Freescale Kinetis TWR-K20D72M using its onboard OSBDM
JTAG adapter.

Note: flash program testing required hacking kinetis_write() to force
longword programming, as the FTFL program section commands formulated by
kinetis_write() currently fail on this board's PK20DX256VLL7 processor.

Change-Id: Ib7b92ff2fe9ebf6158fb1489f554a19e96cd9651
Signed-off-by: R. Steve McKown <rsmckown@gmail.com>
Reviewed-on: http://openocd.zylin.com/1348
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
6 years agostm32f30x: Add boundary scan TAP ID to match silicon 54/1354/2
Andreas Fritiofson [Sat, 20 Apr 2013 15:29:46 +0000 (17:29 +0200)]
stm32f30x: Add boundary scan TAP ID to match silicon

Change-Id: I74ef3cfc437540aedd99da46ac3e0c6cd9c5cd8d
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/1354
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
6 years agomips: m4k alternate pracc code. Patch 4 96/1196/9
Salvador Arroyo [Wed, 3 Apr 2013 15:12:01 +0000 (17:12 +0200)]
mips: m4k alternate pracc code. Patch 4

Now all the functions with only fetch accesses are modified.
The same delay between scans has been added to mips32_pracc_fastdata_xfer(), it should work
at the same scan rates as the other pracc functions, but it needs higher scan_delays
to work.

Change-Id: Ifb31d8ea6de9d22674385782913d221a2494dbbf
Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es>
Reviewed-on: http://openocd.zylin.com/1196
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
6 years agomips: m4k alternate pracc code. Patch 3 95/1195/12
Salvador Arroyo [Sun, 3 Mar 2013 19:11:38 +0000 (20:11 +0100)]
mips: m4k alternate pracc code. Patch 3

Functions mips32_pracc_read_mem(), mips32_cp0_read() and mips32_pracc_read_regs() are now modified.
mips32_cp0_read() is very similar to mips32_read_u32() with one store access.
mips32_pracc_read_regs() is the only function that can not be executed from only one queue.
Now this function is modified to use reg8, it saves all the registers but does not restore reg8.
To remedy this, mips_ejtag_config_step() is called after mips32_save_context() in
mips_m4k_debug_entry(). Function mips_ejtag_config_step() is modified to use reg8 and
restore it from ejtag info instead of using DeSave for save/restore.

Change-Id: Icc224f6d7e41abdec94199483401cb512cc0b450
Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es>
Reviewed-on: http://openocd.zylin.com/1195
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
6 years agomips: m4k alternate pracc code. Patch 2 94/1194/11
Salvador Arroyo [Sun, 3 Mar 2013 12:08:42 +0000 (13:08 +0100)]
mips: m4k alternate pracc code. Patch 2

Each pracc function defines a variable ctx of type struct pracc_queue_info.
To simplify the code tree auxiliary functions are defined: pracc_queue_init(), pracc_add() and
pracc_queue_free().
The second parameter in pracc_add() is the store address if the instruction is a store at dmseg,
otherwise it should be 0.
The code is executed by mips32_pracc_queue_exec(). If ejtag_info->mode is 0 mips32_pracc_exec()
is called and it should work like with current code.
To generate the delay between scans the number of clock ticks are calculated with the help of
jtag_get_speed_khz(). Due to delays in the execution of each single ftdi instruction the number of ticks
are higher as it should be, specially at higher scan rates.
mips32_pracc_read_u32() should now work with the new code.

Change-Id: I471590a4fc89b56af10bd46c48767b4c64de154f
Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es>
Reviewed-on: http://openocd.zylin.com/1194
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
6 years agomips: m4k alternate pracc code. Patch 1 93/1193/8
Salvador Arroyo [Sun, 3 Mar 2013 09:50:42 +0000 (10:50 +0100)]
mips: m4k alternate pracc code. Patch 1

This patch and the following patches define another way of doing processor access without the need to read back
the pracc address as needed in current pracc code.
Current pracc code is executed linearly and unconditionally. The processor starts execution at 0xff200200
and the fetch address is ever incremented by 4, including the last instruction in the delay slot of the branch to start.
Most of the processor accesses are fetch and some are store accesses.
After a previous patch regarding the way of restoring registers (reg8 and reg9), there are no load processor accesses.
The pracc address for a store depends only on the store instruction given before.
m4k core has a 5 stage pipeline and the memory access is done in the 3rth stage. This means that the store access
will not arrive immediately after a store instruction, it appears after another instruction enters the pipeline.
For reference: MD00249 mips32 m4k manual.
A new struct pracc_queue_info is defined to help each function in generating the code. The field pracc_list holds in the
lower half the list of instructions and in the upper half the store addressess, if any. In this way the list can be used by
current code or by the new one to generate the sequence of pracc accesses.
For every pracc access only one scan to register "all" is used by calling the new function mips_ejtag_add_scan_96().
This function does not call jtag_execute_queue(), all the scans needed can be queued before calling for execution.
The pracc bit is not checked before execution, is checked after the queue has been executed.
Without calling the wait function the code works much faster, but the scan frequency must be limited. For pic32mx
with core clock at 4Mhz works  up to 600Khz and with 8Mhz up to 1200. To increase the scan frequency a delay
between scans is added by calling jtag_add_cloks().
A time delay in nano seconds is stored in scan_delay, a new field in ejtag_info, and a handler is provided for it.
A mode field is added to ejtag_info to hold the working mode. If a time delay of 2ms (2000000 ns) or higher is set,
current code is executed, if lower, new code is executed.
Initial default values are set in function mips32_init_arch_info. A reset does not change this settings.

Change-Id: I266bdb386b24744435b6e29d8489a68c0c15ff65
Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es>
Reviewed-on: http://openocd.zylin.com/1193
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
6 years agoImprove clone command in README 49/1349/2
Freddie Chopin [Sat, 20 Apr 2013 07:47:41 +0000 (09:47 +0200)]
Improve clone command in README

Without the explicit dir at the end the repository will be cloned to "code".

Change-Id: Icd8b55b4ba74f23b214c3844e2fb785377768119
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-on: http://openocd.zylin.com/1349
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
Tested-by: jenkins
6 years agostm32w: Added sample target configuration for STM32W108 with STLink-V2 47/1347/2
Ben Nahill [Fri, 19 Apr 2013 15:10:04 +0000 (11:10 -0400)]
stm32w: Added sample target configuration for STM32W108 with STLink-V2

As requested, here is the target configuration that I'm using for an
STLink-V2-attached STM32W108C8. For some reason, it only seems to work
with "reset_config trst_only".

Change-Id: Icbff4f83343e1f505d8afdfc53ff6f8b7496cac9
Signed-off-by: Ben Nahill <bnahill@gmail.com>
Reviewed-on: http://openocd.zylin.com/1347
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
6 years agotopic: STM32W support added to em357 driver 36/1336/2
Ben Nahill [Wed, 17 Apr 2013 20:46:07 +0000 (16:46 -0400)]
topic: STM32W support added to em357 driver

The em357 driver only supported one page configuration (192k in 96 2048k)
pages. This is fine for em357 chips since that's the size they have, but
ST's STM32W chips (pretty much the same) have different flash
configurations available (64, 128, 192, 256k). I can't find anywhere
that would indicate the size of the chip anywhere in memory so the
selection must be manual, using the 'size' parameter. For backwards
compatibility, any size not known to be in use defaults to the 192k
configuration. I don't have any em357 devices to test, but I also found
that I had to re-assert the FPEC clock enable before performing an
erase. This is a single line and shouldn't break any configurations.

My testing so far has only been with a 64k device with 8k of RAM.

Change-Id: Ic0ac400a9696efaa09d1407dd4a4d456bc2c318b
Signed-off-by: Ben Nahill <bnahill@gmail.com>
Reviewed-on: http://openocd.zylin.com/1336
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
6 years agoprogram: do not poll target after reset run 31/1331/2
Spencer Oliver [Fri, 12 Apr 2013 12:10:35 +0000 (13:10 +0100)]
program: do not poll target after reset run

Disable polling the target before we issue a 'reset run'. This stops errors or
warnings if the target disables the SWD or JTAG interface as part of the
application code.

Change-Id: I5019dffdad41a8e210003ece1caf89069ee0f223
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1331
Tested-by: jenkins
6 years agostlink: fix connect under reset issues 15/1315/2
Spencer Oliver [Thu, 11 Apr 2013 10:15:32 +0000 (11:15 +0100)]
stlink: fix connect under reset issues

We need to make sure that srst is asserted before we attempt to switch into
jtag or swd mode otherwise we receive a error (-9) - invalid device id.

Change-Id: I625166c751cfba8e8a5290f40122bb9afc9dbb39
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1315
Tested-by: jenkins
6 years agoparport: fix parport_toggling_time regression 09/1309/2
Spencer Oliver [Tue, 26 Mar 2013 15:23:16 +0000 (15:23 +0000)]
parport: fix parport_toggling_time regression

If parport_toggling_time is called before the adapter speed has been
configured then the call fails. Probably not the best fix, but does at least
enable parport_toggling_time to be used again.

This regression was added in commit 740b9e25b410c164e661d0334a9ea4168406726b

Change-Id: I90300916d6bda5ef053c557e5ac136c4f002bdd1
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1309
Tested-by: jenkins
6 years agoft2232: remove ft2232_large_scan memory leak 78/1278/3
Andreas Fritiofson [Tue, 19 Mar 2013 13:58:24 +0000 (13:58 +0000)]
ft2232: remove ft2232_large_scan memory leak

This is a very long outstanding issue see:
http://lists.berlios.de/pipermail/openocd-development/2011-June/019404.html

As this driver is deprecated the fix is added to purely to reduce the warnings
reported by clang.

Change-Id: I3a16a704e0e8db27efda50fdcfdd35abf5ebed0f
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1278
Tested-by: jenkins
6 years agolibusb: disable debug messages by default 14/1314/2
Spencer Oliver [Tue, 9 Apr 2013 14:40:18 +0000 (15:40 +0100)]
libusb: disable debug messages by default

Change-Id: I15dec0f521502139b57adaff576516af7883a74b
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1314
Tested-by: jenkins
6 years agojimtcl: update embedded jimtcl 11/1311/2
Spencer Oliver [Thu, 28 Mar 2013 09:57:41 +0000 (09:57 +0000)]
jimtcl: update embedded jimtcl

Update to latest jimtcl commit 2c1eba991e21a6f0b531fb0f83e21f9e6ee7c515.
This fixes issues when building on certain versions of Mac OSX.

Change-Id: I551477752d7913c84e6deb60b889d0c14bd200a0
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1311
Tested-by: jenkins
Reviewed-by: Xiaofan <xiaofanc@gmail.com>
6 years agocfg: Added cfg script for at91sam4sd32x targets 33/1333/2
Peter Dietzsch [Mon, 15 Apr 2013 15:17:08 +0000 (17:17 +0200)]
cfg: Added cfg script for at91sam4sd32x targets

Change-Id: I3b8a54d89a180bfded3dae3f1fe3d940540e6e7d
Signed-off-by: Peter Dietzsch <peter.dietzsch@ib-dt.de>
Reviewed-on: http://openocd.zylin.com/1333
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
6 years agoflash: Added support for at91sam4sd32c 32/1332/2
Peter Dietzsch [Mon, 15 Apr 2013 15:16:30 +0000 (17:16 +0200)]
flash: Added support for at91sam4sd32c

Change-Id: I7223980602d7595a3dd7a3ceaac3f58d4f73f88d
Signed-off-by: Peter Dietzsch <peter.dietzsch@ib-dt.de>
Reviewed-on: http://openocd.zylin.com/1332
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
6 years agoft2232: fix input scan ending in drshift/irshift 49/1049/2
Yann Vernier [Tue, 11 Dec 2012 11:52:24 +0000 (12:52 +0100)]
ft2232: fix input scan ending in drshift/irshift

The final bit was incorrectly added as output data, even if no data was
to be written. Changed it to match handling of other bits.

Change-Id: I91e5ba0c932876bfb579c22e6c7ef0300baa1534
Signed-off-by: Yann Vernier <yann.vernier@orsoc.se>
Reviewed-on: http://openocd.zylin.com/1049
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
6 years agoarm_adi_v5: fix for csw nonsecure access. 76/1276/3
Michel JAOUEN [Mon, 18 Mar 2013 15:45:40 +0000 (16:45 +0100)]
arm_adi_v5: fix for csw nonsecure access.

Add command to fix CSW_SPROT in register AP_CSW.
This solves dap apmem access in non secure access.

Change-Id: I7cfcb6434d75f5cfd4a2630a059901cdeea010ce
Signed-off-by: Michel JAOUEN <michel.jaouen@stericsson.com>
Reviewed-on: http://openocd.zylin.com/1276
Tested-by: jenkins
Reviewed-by: mike brown
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
6 years agomips: code cleanup in cp0 command handlers 90/1190/5
Salvador Arroyo [Sat, 2 Mar 2013 15:20:42 +0000 (16:20 +0100)]
mips: code cleanup in cp0 command handlers

After calling mips32_cp0_read() nothing has been queued, the call to jtag_exec_queue() is unnecessary.

Change-Id: Ie25438045a8e9b6b1b170df7b52609d45f284b5a
Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es>
Reviewed-on: http://openocd.zylin.com/1190
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
6 years agomips: change in restoring debug working register 46/1146/6
Salvador Arroyo [Sun, 24 Feb 2013 16:05:28 +0000 (17:05 +0100)]
mips: change in restoring debug working register

In current devel code there are 3 functions (related to m4k code) that need to restore register 8 from pracc stack:
mips32_pracc_read_u32()
mips32_cp0_read()
mips32_pracc_write_mem_generic()

And mips32_pracc_read_mem() needs to restore regs 8 and 9 from pracc stack.

Values in this registers should be the same as read by mips32_pracc_read_regs() when entering debug
mode and can be modified by mips32_pracc_write_regs() when leaving debug mode.
There is no need to read their values from the processor registers every time.

The fields reg8 and reg9 are added to struct mips_ejtag to store these register values
and the call to mips32_save_context() is shifted in mips_m4k_debug_entry() in order
to store them before any other function needs to restore these registers.
For the same reason in function mips_m4k_step() the call to mips_m4k_set_breakpoint(), if needed,
should be made after calling mips_m4k_debug_entry().
For single word write the number of pracc accesses are now 9 or 8, from 13 or 12 in current code,
single word read takes now 10 instead of 12.

This patch is really the first in a set of patches for an alternate m4k pracc code
much faster that current code. At least for me with pic32mx works fine.

Change-Id: Ibd9df5e8b9f78ce05a180949ba6a561c761b61d6
Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es>
Reviewed-on: http://openocd.zylin.com/1146
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
6 years agomips: mips32_pracc_fastdata_xfer() little modification 42/1142/3
Salvador Arroyo [Sat, 23 Feb 2013 21:53:35 +0000 (22:53 +0100)]
mips: mips32_pracc_fastdata_xfer() little modification

In this function after loading the handler code and the jump code there is a call
to wait_for_pracc_rw() to verify that a pracc access is pending.
Next the address is read to verify that the handler is running, the address should be at
fastdata area.
Next, another call is made to wait_for_pracc_rw(). This call is not needed, we now already
that a pracc access is pending.
Better we call this function before loading the end address to be sure it is loaded correctly.

Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es>
Change-Id: If311450ea634786fc28cf1a8e18ed24ce5257d20
Reviewed-on: http://openocd.zylin.com/1142
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
6 years agopic32mx: 0 wait state option 41/1141/3
Salvador Arroyo [Sat, 23 Feb 2013 19:00:21 +0000 (20:00 +0100)]
pic32mx: 0 wait state option

By default pic32mx starts after any reset with 1 wait state for RAM access/exec.
It can be changed to 0 wait states by clearing the BMXWSDRM bit (bit 6) in BMXCON register.
With 0 wait states near doubles the execution speed. CRC check sum can be done much faster
increasing verify_image speed. Fast data transfer also works with a bit higher scan rate, up to 1500 Khz.
This option can be set at any time with
mww 0xbf882004 0x40
or cleared with
mww 0xbf882008 0x40.
Some numbers for FTDI/HS with current devel code and a elf file:

Core clock / wait states              verify_image speed
------------------------------------|------------------------------

        4 Mhz    /    1                            21 KiB/s
        4 Mhz    /    0                            36 KiB/s
        8 Mhz    /    1                            37 KiB/s
        8 Mhz    /    0                            57 KiB/s

Change-Id: I4092ad0f3753f72f77108718d0ed3a3ab84e3b23
Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es>
Reviewed-on: http://openocd.zylin.com/1141
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Xiaofan <xiaofanc@gmail.com>
6 years agopic32mx: false pending at low core clock 39/1139/4
Salvador Arroyo [Sun, 17 Feb 2013 18:23:16 +0000 (19:23 +0100)]
pic32mx: false pending at low core clock

To show up the fail try to step with the core clock set to 31.25Khz
and with a ftdi/hs adapter or with a wiggler, -not with ft2232-.
The scan frequency should be set to 300Khz or higher, at lower frequency probably will not fail.

The code exits with error because the pracc address is at 0x0.

It also fails when using the "all" register, but in this case the code works without any message because the
pracc address is at 0xff202004 when it fails.

I never saw this fail with the core clock set to 500Khz or higher, but ...

The workaround simply puts a 1 ms delay after the execution of the DERET instruction.

Change-Id: I38e8c01a9c39aedd3282140543b83a0844d8ad29
Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es>
Reviewed-on: http://openocd.zylin.com/1139
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
6 years agoAdded support for ARMv7-M in arm io. 88/1188/6
Henrik Nilsson [Wed, 27 Feb 2013 18:16:47 +0000 (19:16 +0100)]
Added support for ARMv7-M in arm io.

Added support for ARMv7-M targets in arm_nandwrite and
arm_nandread.

Change-Id: Iab1d78d401f735e191c6a8519f3619035a300fae
Signed-off-by: Henrik Nilsson <henrik.nilsson@bytequest.se>
Reviewed-on: http://openocd.zylin.com/1188
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
6 years agoAdd abort when JTAG-DP transaction times out. 15/1115/3
Evan Hunter [Thu, 17 Jan 2013 10:23:55 +0000 (18:23 +0800)]
Add abort when JTAG-DP transaction times out.

Fixes system hang for devices that don't ignore
transactions to bad addresses.

Change-Id: Ia98344d7efc12951ef79dbc82b8f792b70a22cee
Signed-off-by: Evan Hunter <ehunter@broadcom.com>
Reviewed-on: http://openocd.zylin.com/1115
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
6 years agoarm_adi_v5: fix mem_ap_read_buf_u32() JTAG nastiness.. 77/1277/4
mike brown [Mon, 18 Mar 2013 17:19:14 +0000 (17:19 +0000)]
arm_adi_v5: fix mem_ap_read_buf_u32() JTAG nastiness..

Moved JTAG code out of transport-neutral file (arm_adi_v5.c) into
transport specific file (adi_v5_jtag.c).
Added ap_block_read to dap_ops interface (arm_adi_v5.h) to support
the move.

Change-Id: I796d3984f138aad052b97c77ac9c12ffd1158f74
Signed-off-by: mike brown <mike@theshedworks.org.uk>
Reviewed-on: http://openocd.zylin.com/1277
Tested-by: jenkins
Reviewed-by: Michel JAOUEN <michel.jaouen@stericsson.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
6 years agogdb server: Fix buffer overrun - sprintf appends a terminating null to the data which... 12/1312/2
Evan Hunter [Tue, 2 Apr 2013 06:35:23 +0000 (17:35 +1100)]
gdb server: Fix buffer overrun - sprintf appends a terminating null to the data which was overrunning the supplied buffer.

Fixes regression introduced in commit 07dcd5648d146d38f9ffa619f0737587e592d0b6

Signed-off-by: Evan Hunter <ehunter@broadcom.com>
Change-Id: Iec64233c0da5a044fb984c4b1803309cb636efe9
Reviewed-on: http://openocd.zylin.com/1312
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
6 years agoti_icdi: add icdi_usb_query result check 79/1279/2
Spencer Oliver [Tue, 19 Mar 2013 14:14:51 +0000 (14:14 +0000)]
ti_icdi: add icdi_usb_query result check

Change-Id: I0b40586677a77ee6ae46fe120a677616bde22d1e
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1279
Tested-by: jenkins
Reviewed-by: Xiaofan <xiaofanc@gmail.com>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
6 years agodocs: update incorrect urls 48/1248/3
Spencer Oliver [Sat, 16 Mar 2013 20:38:38 +0000 (20:38 +0000)]
docs: update incorrect urls

These were missed when git was moved to the new SF platform during Nov 2012.

Change-Id: I7b4ae9dea010d95f9bf4c26841b5b724f41768be
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1248
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Tested-by: jenkins