AT91SAM4L: handle reset run/halt in SMAP
[openocd.git] / tcl /
2015-04-14 Tomas VanekAT91SAM4L: handle reset run/halt in SMAP 04/2604/5
2015-04-14 Uwe Bonnesturtelizer2-revC: Tested with real hardware. 84/2584/4
2015-04-14 Andreas Färbertcl/board: Add Infineon XMC 2Go config 64/2564/3
2015-04-14 Andreas Färbertcl/board: Add Infineon XMC1100 Boot Kit config 72/2472/5
2015-04-14 Andreas Färbertcl/target: Add Infineon XMC1000 family target config 71/2471/5
2015-04-14 Andreas Färbertcl/board: Add Spansion SK-FM4-176L-S6E2CC config 70/2570/3
2015-04-14 Andreas Färbertcl/target: Add Spansion FM4 config 69/2569/2
2015-04-14 Ed Berosetem357: Corrected EM357 support including errata details 81/2581/3
2015-04-14 Paul Fertsertcl/interface/parport: default to sane value on non... 72/2572/2
2015-04-14 Jeff Ciesielskitcl/board: Add Infineon XMC4500 Relax Kit config 67/2567/3
2015-04-14 Jeff Ciesielskitcl/board: Add Infineon XMC4200 Application Kit config 66/2566/3
2015-04-14 Andreas Färbertcl/board: Add Infineon XMC4500 Application Kit configs 81/2481/4
2015-04-14 Andreas Färbertcl/target: Add Infineon XMC4000 family config 80/2480/4
2015-04-14 Felipe Balbitcl: icepick: add icepick_d_set_coreid 24/2624/2
2015-04-14 Felipe Balbitarget: icepick: call icepick_c_setup 23/2623/2
2015-04-14 Felipe Balbitarget: icepick: switch over to icepick_c_router 22/2622/2
2015-04-14 Felipe Balbitcl: target: am437x: pass coreid 21/2621/2
2015-04-14 Felipe Balbitarget: am437x: use more descriptive names 20/2620/2
2015-04-14 Felipe Balbitarget: am437x: fix DebugSS DAP ID 19/2619/2
2015-04-14 Felipe Balbitcl: board: add AM437x IDK support 17/2617/3
2015-04-14 Felipe Balbitcl: am437x: add reset-init event handler 16/2616/3
2015-04-14 Felipe Balbitcl: am437x: disable watchdog on reset-end 15/2615/3
2015-04-14 Felipe Balbitcl: am437x: define registers to be used later 14/2614/3
2015-04-14 Felipe Balbitcl: board: ti_am43xx_evm: follow xds100v2 requirements 13/2613/3
2015-04-14 Felipe Balbitcl: board: ti_am437x_evm: select jtag transport 12/2612/2
2015-04-14 Felipe Balbitcl: target: am437x: use entire SRAM area 11/2611/2
2015-04-14 Felipe Balbitcl: target: am437x.cfg: pass correct dbgbase 02/2602/2
2015-03-25 Uwe BonnesAdd configuration for EFM32 Gecko boards with Segger... 85/2585/4
2015-03-25 Angus Grattontransport: make 'transport select' auto-select the... 51/2551/7
2015-03-25 Paul Fertserdrivers/cmsis-dap: port to common SWD framework 56/2356/9
2015-03-25 Paul Fertsertcl/board/twr-k60f120m: remove useless flash bank 0... 95/2595/3
2015-03-25 Paul Fertserarmv7m: add generic trace support (TPIU, ITM, etc.) 38/2538/14
2015-03-10 Uwe Bonnesstm32l1.cfg: Add missing dash to fix f7394049d3 commit. 90/2590/3
2015-03-09 Andreas Fritiofsontcl: Add default hooks for STM32F3x 96/2196/5
2015-03-09 Matthijs van Duintcl/interface/ftdi/xdsv2: fix and clarify EMU* signals 31/2231/3
2015-03-09 Uwe Bonnesstm32l1.cfg: Add ID Code of Cat.2 devices. 17/2517/4
2015-03-09 Uwe Bonnesstm32f3x.cfg: Remove duplicate item. 54/2554/3
2015-03-09 Nemui Trinomiuslpc2000: Add LPC407x/8x flash size auto detection 55/2555/2
2015-03-09 Arne Wichmanntarget & board: AT91SAM7A2 and Olimex SAM7-LA2 18/2318/5
2015-02-22 Paul Fertsercfg: add board and target configs for TI SimpleLink... 65/2465/6
2015-02-22 Uwe BonnesProvide genuine F3 nucleo config and source it for... 34/2434/3
2015-02-22 Oleksij Rempeltcl/target|board: add configs for Alphascale asm9260t 15/2515/3
2015-02-22 Andreas Fritiofsoncfg: Fix Kinetis kwikstik/kx config 27/2227/3
2015-02-11 Anton Kuzmintcl/interface/ftdi: correct LED config for BusBlaster... 39/2539/2
2015-02-11 Andreas Bomholtzsim3x: new flash driver for Silabs SiM3 microcontroller... 78/2078/19
2015-02-11 Angus Grattonnrf51 - Add async loader. Performance on nrf51822QAA... 04/2204/12
2015-02-11 Joerg FischerJ-Link serial number config option 21/2521/3
2015-02-11 Oleksij Rempeltcl: add TP-LINK TL-MR3020 to the firmware recovery... 20/2520/6
2015-02-11 Oleksij Rempeltcl/target|board: add config Atheros ar9331 19/2519/5
2015-02-11 Pawel Simini51: support for Nuvoton NuMicro M051 series flash... 26/2426/3
2015-02-11 Jacob Palssontcl/target: add CC2538 and CC26xx target files (with... 32/2232/5
2015-02-11 Ed Berosetem357: added target files for em357 and em358 70/2470/8
2015-02-11 Heinz Schweigercfg: TI Tiva C dk-tm4c129x Evaluation Kits 67/1867/6
2015-02-11 Tomas Vanekpsoc4: support for Cypress PSoC 41xx/42xx family 82/2282/6
2015-02-04 Paul Fertserflash/nor/stm32lx: use 0 base to autodetect second... 03/2503/2
2015-02-02 Uwe BonnesAdd more STM32F3 IDs in target/stm32f3.cfg. 35/2435/3
2015-01-30 Paul Fertsertcl/target: add lpc8xx.cfg 64/2464/4
2015-01-26 Paul Fertsertcl/board: frdm kinetis boards have SRST connected 62/2462/2
2015-01-26 Paul Fertsertcl/target/stellaris: Snowflake supports SYSRESETREQ too 61/2461/2
2015-01-26 Paul Fertsertcl/target: consolidate Kinetis configs 60/2460/2
2015-01-26 Thomas Eichingertcl/board: Add ST NUCLEO L152RE configuration 89/2489/3
2015-01-26 Paul Fertsercfg: add srst_nogate to the supported targets, remove... 59/2459/3
2015-01-26 Uwe Bonnesstm32f4/nucleo: Use only one configuration for all... 97/2397/4
2015-01-26 Uwe Bonnesstm32f0/nucleo: Use only one configuration for all... 96/2396/4
2015-01-15 Karl Palssontarget/stm32xx: Endian is not configurable. 46/2446/2
2015-01-15 Paul Fertsertcl/interface/ftdi: add config for the IoT-LAB adapter 15/2415/2
2015-01-15 Andreas Färbertcl/board: Add TI TMDX570LS20SUSB board config 40/2440/2
2015-01-15 Karl Palssoncfg: stm32l1: Use specific chipname 47/2447/2
2015-01-09 Spencer Olivercfg: fix lpc17xx regression 84/2384/2
2014-12-03 Karl Palssonstm32l: split l0/l1 support no jtag, different HSI... 05/2405/2
2014-12-03 Juha Niskanenstm32: Fix L0/1xx CPUTAPID setting and add new L1xx... 76/2376/2
2014-11-24 Uwe Bonnestcl/target/stm32f4: ramp up JTAG speed, HSI is 16MHz... 83/2383/2
2014-11-24 Uwe Bonnestcl/target/stm32f4x: add F401 and F411 IDs 79/2379/3
2014-11-02 Paul Fertsertcl/interface/ftdi/swd-resistor-hack: clarify and add... 57/2357/2
2014-10-16 Spencer Olivercmsis-dap: add serial number support 29/2329/3
2014-10-06 Spencer Olivercfg: remove incorrect execute permissions 33/2333/2
2014-10-06 Rémi PRUD'HOMMEstm32: Add config file for a new board STM32L052 dsicovery 17/2317/4
2014-10-06 Rémi PRUD'HOMMEstm32: add L0xx CPUTAPID 15/2315/4
2014-10-06 Paul Fertserinterface/ftdi/olimex-arm-usb-ocd-h: fix nTRST control... 86/2286/4
2014-09-29 Karl Palssontcl/board: add TI Tiva C ek-tm4c1294xl config 63/2063/5
2014-09-22 Andreas Fritiofsontarget: Remove "-variant" argument 83/2283/2
2014-09-22 Austin PhillipsSupport hla_serial command for ST-LINK adapters. 98/2198/8
2014-09-15 Nemui Trinomiuscfg: Added Nucleo-F411RE board config. 59/2259/2
2014-09-15 Paul Fertsertcl/board/sheevaplug: add adapter_khz setting 66/2266/2
2014-09-11 Paul Fertsertcl/interface/ftdi/sheevaplug: fix device description 65/2265/2
2014-09-08 Vanya Sergeevcfg: refactor lpc1xxx targets onto one base config 60/1960/13
2014-09-08 Бурага Александрtcl/target: add config for К1879ХБ1Я, a hybrid ARM11... 72/2272/2
2014-09-08 Paul Fertsertcl/interface/ftdi: fix TRST for Olimex TINY adapters 47/2247/2
2014-09-08 Paul Fertsertcl/interface/ftdi: add kt-link config (with SWD) for... 69/2269/2
2014-09-08 Paul Fertsertcl/target/imx6: add yet another SJC tapid 53/2253/3
2014-08-19 Paul Fertsertcl/interface/ftdi: auto-select SWD from converters... 48/2248/2
2014-08-19 Eldar Khayrullintcl/board/stm32ldiscovery: fix breakage 55/2255/2
2014-08-11 Andrey Smirnovtcl/board: Add board configuration for nRF51822-mKIT 16/2116/7
2014-08-11 Angus GrattonnRF51822: Add workaround for PAN-16 where not all RAM... 02/2202/4
2014-08-11 Andrey Skvortsovtcl/target: added support for TI OMAP/AM 3505 and 3517 27/2127/3
2014-08-11 Paul FertserAllow transports to override the selected target (hla... 64/1664/11
2014-08-04 Andreas Fritiofsoninterface/ftdi: Mark flyswatter.cfg as tested 37/2237/2
2014-08-02 Paul Fertsertcl/board: fix all the remaining boards that were sourc... 30/2230/2
2014-07-10 Fredrik Hederstiernatcl/board: add STM32429I-EVAL and STM32439I-EVAL dev... 71/2171/3
2014-07-10 Paul Fertsertcl/target/stm32l: restore slow clock on reset 88/2188/3
next