From: luca vinci Date: Wed, 8 Jan 2020 09:15:40 +0000 (+0100) Subject: bluenrg-x: simplyfied the driver X-Git-Tag: v0.11.0-rc1~418 X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=commitdiff_plain;h=e9932ef23d4af8466e724b7603549778fb93c294 bluenrg-x: simplyfied the driver Adopted only fast algorithm for flash programming: - write_word and write_byte methods have been removed. - start and end write alignments have been defined. Moved flash controller registers offsets in a common file shared with the flash algorithm. - the flash base address is passed to the flash algorithm as a parameter. Removed unused functions Change-Id: I80aeab3994e477044bbcf02e66d9525dae0cb491 Signed-off-by: luca vinci Reviewed-on: http://openocd.zylin.com/5393 Tested-by: jenkins Reviewed-by: Tomas Vanek Reviewed-by: Michele Sardo --- diff --git a/contrib/loaders/flash/bluenrg-x/Makefile b/contrib/loaders/flash/bluenrg-x/Makefile index ce86e481a4..1a5cfc013f 100644 --- a/contrib/loaders/flash/bluenrg-x/Makefile +++ b/contrib/loaders/flash/bluenrg-x/Makefile @@ -8,18 +8,15 @@ OBJDUMP=$(CROSS_COMPILE)objdump CFLAGS = -c -mthumb -mcpu=cortex-m0 -O3 -g -all:bluenrg-2_write.inc bluenrg-lp_write.inc +all: bluenrg-x_write.inc .PHONY: clean .INTERMEDIATE: bluenrg-x_write.o -bluenrg-2_write.o: bluenrg-x_write.c +%.o: %.c $(CC) $(CFLAGS) -Wall -Wextra -Wa,-adhln=$*.lst $< -o $@ -bluenrg-lp_write.o: bluenrg-x_write.c - $(CC) $(CFLAGS) -D BLUENRG_LP -Wall -Wextra -Wa,-adhln=$*.lst $< -o $@ - %.bin: %.o $(OBJCOPY) -Obinary $< $@ diff --git a/contrib/loaders/flash/bluenrg-x/bluenrg-2_write.inc b/contrib/loaders/flash/bluenrg-x/bluenrg-2_write.inc deleted file mode 100644 index 1ce4c860eb..0000000000 --- a/contrib/loaders/flash/bluenrg-x/bluenrg-2_write.inc +++ /dev/null @@ -1,18 +0,0 @@ -/* Autogenerated with ../../../../src/helper/bin2char.sh */ -0x05,0x93,0x43,0x68,0x06,0x00,0x09,0x93,0x05,0x9b,0x07,0x91,0x06,0x92,0x34,0x4d, -0x34,0x4c,0x00,0x2b,0x5d,0xd0,0x72,0x68,0x33,0x68,0x9a,0x42,0xfb,0xd0,0x33,0x68, -0x00,0x2b,0x56,0xd0,0x72,0x68,0x33,0x68,0x9a,0x42,0x53,0xd9,0x73,0x68,0x07,0x9a, -0xd3,0x1a,0x0f,0x2b,0xef,0xdd,0x00,0x21,0x2b,0x4a,0x03,0x93,0x11,0x60,0x00,0x2b, -0x37,0xd0,0x2a,0x4a,0x06,0x9b,0x94,0x46,0x63,0x44,0x18,0x00,0x73,0x68,0x08,0x96, -0x04,0x93,0x1a,0x00,0x26,0x4b,0x99,0x46,0x26,0x4b,0x98,0x46,0x26,0x4b,0x9c,0x46, -0x26,0x4b,0x9b,0x46,0x26,0x4b,0x9a,0x46,0x01,0x23,0x91,0x68,0x17,0x68,0x01,0x91, -0xd1,0x68,0x56,0x68,0x02,0x91,0x3f,0x21,0x29,0x60,0x81,0x03,0x09,0x0c,0x21,0x60, -0x49,0x46,0x0f,0x60,0x47,0x46,0x3e,0x60,0x66,0x46,0x01,0x99,0x31,0x60,0x5e,0x46, -0x02,0x99,0x31,0x60,0x51,0x46,0xcc,0x26,0x0e,0x60,0x29,0x68,0x0b,0x42,0xfc,0xd0, -0x04,0x99,0x03,0x9e,0x10,0x32,0x10,0x30,0x51,0x1a,0x8e,0x42,0xdd,0xd8,0x08,0x9e, -0x72,0x60,0x03,0x9a,0x06,0x9b,0x94,0x46,0x63,0x44,0x06,0x93,0x07,0x9a,0x73,0x68, -0x9a,0x42,0x01,0xd8,0x09,0x9b,0x73,0x60,0x05,0x9b,0x03,0x9a,0x9b,0x1a,0x05,0x93, -0xa1,0xd1,0x00,0xbe,0x33,0x68,0x72,0x68,0x9b,0x1a,0xaa,0xd5,0x9b,0xe7,0xc0,0x46, -0x10,0x00,0x10,0x40,0x18,0x00,0x10,0x40,0x0c,0x00,0x10,0x40,0x00,0x00,0xfc,0xef, -0x40,0x00,0x10,0x40,0x44,0x00,0x10,0x40,0x48,0x00,0x10,0x40,0x4c,0x00,0x10,0x40, -0x00,0x00,0x10,0x40, diff --git a/contrib/loaders/flash/bluenrg-x/bluenrg-lp_write.inc b/contrib/loaders/flash/bluenrg-x/bluenrg-lp_write.inc deleted file mode 100644 index cc9b2a174f..0000000000 --- a/contrib/loaders/flash/bluenrg-x/bluenrg-lp_write.inc +++ /dev/null @@ -1,18 +0,0 @@ -/* Autogenerated with ../../../../src/helper/bin2char.sh */ -0x05,0x93,0x43,0x68,0x06,0x00,0x09,0x93,0x05,0x9b,0x07,0x91,0x06,0x92,0x34,0x4d, -0x34,0x4c,0x00,0x2b,0x5d,0xd0,0x72,0x68,0x33,0x68,0x9a,0x42,0xfb,0xd0,0x33,0x68, -0x00,0x2b,0x56,0xd0,0x72,0x68,0x33,0x68,0x9a,0x42,0x53,0xd9,0x73,0x68,0x07,0x9a, -0xd3,0x1a,0x0f,0x2b,0xef,0xdd,0x00,0x21,0x2b,0x4a,0x03,0x93,0x11,0x60,0x00,0x2b, -0x37,0xd0,0x2a,0x4a,0x06,0x9b,0x94,0x46,0x63,0x44,0x18,0x00,0x73,0x68,0x08,0x96, -0x04,0x93,0x1a,0x00,0x26,0x4b,0x99,0x46,0x26,0x4b,0x98,0x46,0x26,0x4b,0x9c,0x46, -0x26,0x4b,0x9b,0x46,0x26,0x4b,0x9a,0x46,0x01,0x23,0x91,0x68,0x17,0x68,0x01,0x91, -0xd1,0x68,0x56,0x68,0x02,0x91,0x3f,0x21,0x29,0x60,0x81,0x03,0x09,0x0c,0x21,0x60, -0x49,0x46,0x0f,0x60,0x47,0x46,0x3e,0x60,0x66,0x46,0x01,0x99,0x31,0x60,0x5e,0x46, -0x02,0x99,0x31,0x60,0x51,0x46,0xcc,0x26,0x0e,0x60,0x29,0x68,0x0b,0x42,0xfc,0xd0, -0x04,0x99,0x03,0x9e,0x10,0x32,0x10,0x30,0x51,0x1a,0x8e,0x42,0xdd,0xd8,0x08,0x9e, -0x72,0x60,0x03,0x9a,0x06,0x9b,0x94,0x46,0x63,0x44,0x06,0x93,0x07,0x9a,0x73,0x68, -0x9a,0x42,0x01,0xd8,0x09,0x9b,0x73,0x60,0x05,0x9b,0x03,0x9a,0x9b,0x1a,0x05,0x93, -0xa1,0xd1,0x00,0xbe,0x33,0x68,0x72,0x68,0x9b,0x1a,0xaa,0xd5,0x9b,0xe7,0xc0,0x46, -0x10,0x10,0x00,0x40,0x18,0x10,0x00,0x40,0x0c,0x10,0x00,0x40,0x00,0x00,0xfc,0xef, -0x40,0x10,0x00,0x40,0x44,0x10,0x00,0x40,0x48,0x10,0x00,0x40,0x4c,0x10,0x00,0x40, -0x00,0x10,0x00,0x40, diff --git a/contrib/loaders/flash/bluenrg-x/bluenrg-x_write.c b/contrib/loaders/flash/bluenrg-x/bluenrg-x_write.c index 695f9145ae..f09f7f58ab 100644 --- a/contrib/loaders/flash/bluenrg-x/bluenrg-x_write.c +++ b/contrib/loaders/flash/bluenrg-x/bluenrg-x_write.c @@ -2,6 +2,7 @@ /* Then postprocess output of command "arm-none-eabi-objdump -d bluenrgx.o" to make a C array of bytes */ #include +#include "../../../../src/flash/nor/bluenrg-x.h" /* Status Values ----------------------------------------------------------*/ #define SUCCESS 0 @@ -13,59 +14,22 @@ #define ERR_ERASE_REQUIRED 6 #define ERR_VERIFY_FAILED 7 -/* Flash Controller defines ---------------------------------------------------*/ -#ifdef BLUENRG_LP -#define FLASH_REG_COMMAND ((volatile uint32_t *)0x40001000) -#define FLASH_REG_CONFIG ((volatile uint32_t *)0x40001004) -#define FLASH_REG_IRQSTAT ((volatile uint32_t *)0x40001008) -#define FLASH_REG_IRQMASK ((volatile uint32_t *)0x4000100C) -#define FLASH_REG_IRQRAW ((volatile uint32_t *)0x40001010) -#define FLASH_REG_ADDRESS ((volatile uint32_t *)0x40001018) -#define FLASH_REG_UNLOCKM ((volatile uint32_t *)0x4000101C) -#define FLASH_REG_UNLOCKL ((volatile uint32_t *)0x40001020) -#define FLASH_REG_DATA0 ((volatile uint32_t *)0x40001040) -#define FLASH_REG_DATA1 ((volatile uint32_t *)0x40001044) -#define FLASH_REG_DATA2 ((volatile uint32_t *)0x40001048) -#define FLASH_REG_DATA3 ((volatile uint32_t *)0x4000104C) -#define FLASH_SIZE_REG 0x40001014 -#else -#define FLASH_REG_COMMAND ((volatile uint32_t *)0x40100000) -#define FLASH_REG_CONFIG ((volatile uint32_t *)0x40100004) -#define FLASH_REG_IRQSTAT ((volatile uint32_t *)0x40100008) -#define FLASH_REG_IRQMASK ((volatile uint32_t *)0x4010000C) -#define FLASH_REG_IRQRAW ((volatile uint32_t *)0x40100010) -#define FLASH_REG_ADDRESS ((volatile uint32_t *)0x40100018) -#define FLASH_REG_UNLOCKM ((volatile uint32_t *)0x4010001C) -#define FLASH_REG_UNLOCKL ((volatile uint32_t *)0x40100020) -#define FLASH_REG_DATA0 ((volatile uint32_t *)0x40100040) -#define FLASH_REG_DATA1 ((volatile uint32_t *)0x40100044) -#define FLASH_REG_DATA2 ((volatile uint32_t *)0x40100048) -#define FLASH_REG_DATA3 ((volatile uint32_t *)0x4010004C) -#define FLASH_SIZE_REG 0x40100014 -#endif - #define MFB_MASS_ERASE 0x01 #define MFB_PAGE_ERASE 0x02 #define DO_ERASE 0x0100 #define DO_VERIFY 0x0200 -#define FLASH_CMD_ERASE_PAGE 0x11 -#define FLASH_CMD_MASSERASE 0x22 -#define FLASH_CMD_WRITE 0x33 -#define FLASH_CMD_BURSTWRITE 0xCC -#define FLASH_INT_CMDDONE 0x01 -#define MFB_BOTTOM (0x10040000) -#define MFB_SIZE_B ((16 * (((*(uint32_t *) FLASH_SIZE_REG) + 1) >> 12)) * 1024) -#define MFB_SIZE_W (MFB_SIZE_B/4) -#define MFB_TOP (MFB_BOTTOM+MFB_SIZE_B-1) -#define MFB_PAGE_SIZE_B (2048) -#define MFB_PAGE_SIZE_W (MFB_PAGE_SIZE_B/4) + +#define MFB_BOTTOM (0x10040000) +#define MFB_SIZE_B(regs_base) ((16 * (((*(volatile uint32_t *)(regs_base + FLASH_SIZE_REG)) + 1) >> 12)) * 1024) +#define MFB_SIZE_W (MFB_SIZE_B/4) +#define MFB_TOP (MFB_BOTTOM+MFB_SIZE_B-1) +#define MFB_PAGE_SIZE_B (2048) +#define MFB_PAGE_SIZE_W (MFB_PAGE_SIZE_B/4) #define AREA_ERROR 0x01 #define AREA_MFB 0x04 -#define FLASH_WORD_LEN 4 - typedef struct { volatile uint8_t *wp; uint8_t *rp; @@ -73,29 +37,29 @@ typedef struct { /* Flash Commands --------------------------------------------------------*/ static inline __attribute__((always_inline)) uint32_t flashWrite(uint32_t address, uint8_t **data, - uint32_t writeLength) + uint32_t writeLength, uint32_t flash_regs_base) { uint32_t index, flash_word[4]; uint8_t i; - *FLASH_REG_IRQMASK = 0; + *((volatile uint32_t *)(flash_regs_base + FLASH_REG_IRQMASK)) = 0; for (index = 0; index < writeLength; index += (FLASH_WORD_LEN*4)) { for (i = 0; i < 4; i++) flash_word[i] = (*(uint32_t *) (*data + i*4)); /* Clear the IRQ flags */ - *FLASH_REG_IRQRAW = 0x0000003F; + *((volatile uint32_t *)(flash_regs_base + FLASH_REG_IRQRAW)) = 0x0000003F; /* Load the flash address to write */ - *FLASH_REG_ADDRESS = (uint16_t)((address + index - MFB_BOTTOM) >> 2); + *((volatile uint32_t *)(flash_regs_base + FLASH_REG_ADDRESS)) = (uint16_t)((address + index - MFB_BOTTOM) >> 2); /* Prepare and load the data to flash */ - *FLASH_REG_DATA0 = flash_word[0]; - *FLASH_REG_DATA1 = flash_word[1]; - *FLASH_REG_DATA2 = flash_word[2]; - *FLASH_REG_DATA3 = flash_word[3]; + *((volatile uint32_t *)(flash_regs_base + FLASH_REG_DATA0)) = flash_word[0]; + *((volatile uint32_t *)(flash_regs_base + FLASH_REG_DATA1)) = flash_word[1]; + *((volatile uint32_t *)(flash_regs_base + FLASH_REG_DATA2)) = flash_word[2]; + *((volatile uint32_t *)(flash_regs_base + FLASH_REG_DATA3)) = flash_word[3]; /* Flash write command */ - *FLASH_REG_COMMAND = FLASH_CMD_BURSTWRITE; + *((volatile uint32_t *)(flash_regs_base + FLASH_REG_COMMAND)) = FLASH_CMD_BURSTWRITE; /* Wait the end of the flash write command */ - while ((*FLASH_REG_IRQRAW & FLASH_INT_CMDDONE) == 0) + while ((*((volatile uint32_t *)(flash_regs_base + FLASH_REG_IRQRAW)) & FLASH_INT_CMDDONE) == 0) ; *data += (FLASH_WORD_LEN * 4); } @@ -106,7 +70,8 @@ static inline __attribute__((always_inline)) uint32_t flashWrite(uint32_t addres __attribute__((naked)) __attribute__((noreturn)) void write(uint8_t *work_area_p, uint8_t *fifo_end, uint8_t *target_address, - uint32_t count) + uint32_t count, + uint32_t flash_regs_base) { uint32_t retval; volatile work_area_t *work_area = (work_area_t *) work_area_p; @@ -134,7 +99,7 @@ __attribute__((naked)) __attribute__((noreturn)) void write(uint8_t *work_area_p continue; } - retval = flashWrite((uint32_t) target_address, (uint8_t **) &work_area->rp, fifo_linear_size); + retval = flashWrite((uint32_t) target_address, (uint8_t **) &work_area->rp, fifo_linear_size, flash_regs_base); if (retval != SUCCESS) { work_area->rp = (uint8_t *)retval; break; diff --git a/contrib/loaders/flash/bluenrg-x/bluenrg-x_write.inc b/contrib/loaders/flash/bluenrg-x/bluenrg-x_write.inc new file mode 100644 index 0000000000..ff05634bb2 --- /dev/null +++ b/contrib/loaders/flash/bluenrg-x/bluenrg-x_write.inc @@ -0,0 +1,17 @@ +/* Autogenerated with ../../../../src/helper/bin2char.sh */ +0x05,0x93,0x43,0x68,0x14,0x9e,0x09,0x93,0x05,0x9b,0x05,0x00,0x07,0x91,0x06,0x92, +0x01,0x24,0xb1,0x46,0x00,0x2b,0x68,0xd0,0x6a,0x68,0x2b,0x68,0x9a,0x42,0xfb,0xd0, +0x2b,0x68,0x00,0x2b,0x61,0xd0,0x6a,0x68,0x2b,0x68,0x9a,0x42,0x5e,0xd9,0x6b,0x68, +0x07,0x9a,0xd3,0x1a,0x0f,0x2b,0xef,0xdd,0x4a,0x46,0x00,0x21,0x03,0x93,0xd1,0x60, +0x00,0x2b,0x42,0xd0,0x40,0x22,0x4a,0x44,0x90,0x46,0x44,0x22,0x4a,0x44,0x00,0x92, +0x48,0x22,0x4a,0x44,0x93,0x46,0x4c,0x22,0x27,0x4f,0x4a,0x44,0xbc,0x46,0x4e,0x46, +0x92,0x46,0x06,0x99,0x4b,0x46,0x61,0x44,0x08,0x00,0x00,0x99,0x18,0x36,0x6a,0x68, +0x08,0x95,0x8c,0x46,0x55,0x46,0xda,0x46,0xb3,0x46,0x10,0x33,0x04,0x92,0x11,0x68, +0x5e,0x46,0x00,0x91,0x51,0x68,0x97,0x68,0x01,0x91,0xd1,0x68,0x02,0x91,0x3f,0x21, +0x19,0x60,0x81,0x03,0x09,0x0c,0x31,0x60,0x46,0x46,0x00,0x99,0x31,0x60,0x66,0x46, +0x01,0x99,0x31,0x60,0x56,0x46,0x02,0x99,0x37,0x60,0x29,0x60,0xcc,0x26,0x49,0x46, +0x0e,0x60,0x19,0x68,0x0c,0x42,0xfc,0xd0,0x04,0x99,0x03,0x9e,0x10,0x32,0x10,0x30, +0x51,0x1a,0x8e,0x42,0xdb,0xd8,0x08,0x9d,0x6a,0x60,0x03,0x9a,0x06,0x9b,0x94,0x46, +0x63,0x44,0x06,0x93,0x07,0x9a,0x6b,0x68,0x9a,0x42,0x01,0xd8,0x09,0x9b,0x6b,0x60, +0x05,0x9b,0x03,0x9a,0x9b,0x1a,0x05,0x93,0x96,0xd1,0x00,0xbe,0x2b,0x68,0x6a,0x68, +0x9b,0x1a,0x9f,0xd5,0x90,0xe7,0xc0,0x46,0x00,0x00,0xfc,0xef, diff --git a/doc/openocd.texi b/doc/openocd.texi index 8bb4df6851..8aab1ad941 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -5842,15 +5842,7 @@ Note that when users ask to erase all the sectors of the flash, a mass erase com each single sector one by one. @example -flash erase_sector 0 0 79 # It will perform a mass erase on BlueNRG-1 -@end example - -@example -flash erase_sector 0 0 127 # It will perform a mass erase on BlueNRG-2 -@end example - -@example -flash erase_sector 0 0 127 # It will perform a mass erase on BlueNRG-LP +flash erase_sector 0 0 last # It will perform a mass erase @end example Triggering a mass erase is also useful when users want to disable readout protection. diff --git a/src/flash/nor/Makefile.am b/src/flash/nor/Makefile.am index 18b3b859b1..64c4a9079c 100644 --- a/src/flash/nor/Makefile.am +++ b/src/flash/nor/Makefile.am @@ -76,6 +76,7 @@ NOR_DRIVERS = \ NORHEADERS = \ %D%/core.h \ %D%/cc3220sf.h \ + %D%/bluenrg-x.h \ %D%/cc26xx.h \ %D%/cfi.h \ %D%/driver.h \ diff --git a/src/flash/nor/bluenrg-x.c b/src/flash/nor/bluenrg-x.c index 79821168e4..f7f5e63709 100644 --- a/src/flash/nor/bluenrg-x.c +++ b/src/flash/nor/bluenrg-x.c @@ -24,119 +24,63 @@ #include #include #include "imp.h" +#include "bluenrg-x.h" -#define BLUENRG2_IDCODE (0x0200A041) -#define BLUENRGLP_IDCODE (0x0201E041) #define BLUENRG2_JTAG_REG (flash_priv_data_2.jtag_idcode_reg) #define BLUENRGLP_JTAG_REG (flash_priv_data_lp.jtag_idcode_reg) -#define FLASH_SIZE_REG(bluenrgx_info) (bluenrgx_info->flash_ptr->flash_size_reg) #define DIE_ID_REG(bluenrgx_info) (bluenrgx_info->flash_ptr->die_id_reg) #define JTAG_IDCODE_REG(bluenrgx_info) (bluenrgx_info->flash_ptr->jtag_idcode_reg) -#define FLASH_BASE(bluenrgx_info) (bluenrgx_info->flash_ptr->flash_base) #define FLASH_PAGE_SIZE(bluenrgx_info) (bluenrgx_info->flash_ptr->flash_page_size) -#define FLASH_REG_COMMAND(bluenrgx_info) (bluenrgx_info->flash_ptr->flash_reg_command) -#define FLASH_REG_IRQRAW(bluenrgx_info) (bluenrgx_info->flash_ptr->flash_reg_irqraw) -#define FLASH_REG_ADDRESS(bluenrgx_info) (bluenrgx_info->flash_ptr->flash_reg_address) -#define FLASH_REG_DATA(bluenrgx_info) (bluenrgx_info->flash_ptr->flash_reg_data) -#define FLASH_CMD_ERASE_PAGE 0x11 -#define FLASH_CMD_MASSERASE 0x22 -#define FLASH_CMD_WRITE 0x33 -#define FLASH_CMD_BURSTWRITE 0xCC -#define FLASH_INT_CMDDONE 0x01 -#define FLASH_WORD_LEN 4 - -/* See contrib/loaders/flash/bluenrg-x/bluenrg-x_write.c for source and - * hints how to generate the data! - */ -static const uint8_t bluenrgx_flash_write_code_2[] = { -#include "../../../contrib/loaders/flash/bluenrg-x/bluenrg-2_write.inc" - }; - -static const uint8_t bluenrgx_flash_write_code_lp[] = { -#include "../../../contrib/loaders/flash/bluenrg-x/bluenrg-lp_write.inc" - }; struct flash_ctrl_priv_data { - uint32_t flash_size_reg; uint32_t die_id_reg; uint32_t jtag_idcode_reg; uint32_t flash_base; + uint32_t flash_regs_base; uint32_t flash_page_size; - uint32_t flash_reg_command; - uint32_t flash_reg_irqraw; - uint32_t flash_reg_address; - uint32_t flash_reg_data; uint32_t jtag_idcode; char *part_name; - const uint8_t *flash_write_code; - uint32_t flash_write_code_size; }; const struct flash_ctrl_priv_data flash_priv_data_1 = { - .flash_size_reg = 0x40100014, .die_id_reg = 0x4090001C, .jtag_idcode_reg = 0x40900028, .flash_base = 0x10040000, + .flash_regs_base = 0x40100000, .flash_page_size = 2048, - .flash_reg_command = 0x40100000, - .flash_reg_irqraw = 0x40100010, - .flash_reg_address = 0x40100018, - .flash_reg_data = 0x40100040, .jtag_idcode = 0x00000000, .part_name = "BLUENRG-1", - .flash_write_code = bluenrgx_flash_write_code_2, - .flash_write_code_size = sizeof(bluenrgx_flash_write_code_2), }; const struct flash_ctrl_priv_data flash_priv_data_2 = { - .flash_size_reg = 0x40100014, .die_id_reg = 0x4090001C, .jtag_idcode_reg = 0x40900028, .flash_base = 0x10040000, + .flash_regs_base = 0x40100000, .flash_page_size = 2048, - .flash_reg_command = 0x40100000, - .flash_reg_irqraw = 0x40100010, - .flash_reg_address = 0x40100018, - .flash_reg_data = 0x40100040, - .jtag_idcode = BLUENRG2_IDCODE, + .jtag_idcode = 0x0200A041, .part_name = "BLUENRG-2", - .flash_write_code = bluenrgx_flash_write_code_2, - .flash_write_code_size = sizeof(bluenrgx_flash_write_code_2), }; const struct flash_ctrl_priv_data flash_priv_data_lp = { - .flash_size_reg = 0x40001014, .die_id_reg = 0x40000000, .jtag_idcode_reg = 0x40000004, .flash_base = 0x10040000, + .flash_regs_base = 0x40001000, .flash_page_size = 2048, - .flash_reg_command = 0x40001000, - .flash_reg_irqraw = 0x40001010, - .flash_reg_address = 0x40001018, - .flash_reg_data = 0x40001040, - .jtag_idcode = BLUENRGLP_IDCODE, + .jtag_idcode = 0x0201E041, .part_name = "BLUENRG-LP", - .flash_write_code = bluenrgx_flash_write_code_lp, - .flash_write_code_size = sizeof(bluenrgx_flash_write_code_lp), }; struct bluenrgx_flash_bank { int probed; uint32_t die_id; const struct flash_ctrl_priv_data *flash_ptr; - const uint8_t *flash_write_code; - uint32_t flash_write_code_size; }; const struct flash_ctrl_priv_data *flash_ctrl[] = {&flash_priv_data_1, &flash_priv_data_2, &flash_priv_data_lp}; -static int bluenrgx_protect_check(struct flash_bank *bank) -{ - /* Nothing to do. Protection is only handled in SW. */ - return ERROR_OK; -} - /* flash_bank bluenrg-x 0 0 0 0 */ FLASH_BANK_COMMAND_HANDLER(bluenrgx_flash_bank_command) { @@ -150,6 +94,9 @@ FLASH_BANK_COMMAND_HANDLER(bluenrgx_flash_bank_command) return ERROR_FAIL; } + bank->write_start_alignment = 16; + bank->write_end_alignment = 16; + bank->driver_priv = bluenrgx_info; bluenrgx_info->probed = 0; @@ -160,6 +107,22 @@ FLASH_BANK_COMMAND_HANDLER(bluenrgx_flash_bank_command) return ERROR_OK; } +static inline uint32_t bluenrgx_get_flash_reg(struct flash_bank *bank, uint32_t reg_offset) +{ + struct bluenrgx_flash_bank *bluenrgx_info = bank->driver_priv; + return bluenrgx_info->flash_ptr->flash_regs_base + reg_offset; +} + +static inline int bluenrgx_read_flash_reg(struct flash_bank *bank, uint32_t reg_offset, uint32_t *value) +{ + return target_read_u32(bank->target, bluenrgx_get_flash_reg(bank, reg_offset), value); +} + +static inline int bluenrgx_write_flash_reg(struct flash_bank *bank, uint32_t reg_offset, uint32_t value) +{ + return target_write_u32(bank->target, bluenrgx_get_flash_reg(bank, reg_offset), value); +} + static int bluenrgx_erase(struct flash_bank *bank, int first, int last) { int retval = ERROR_OK; @@ -186,25 +149,25 @@ static int bluenrgx_erase(struct flash_bank *bank, int first, int last) if (mass_erase) { command = FLASH_CMD_MASSERASE; address = bank->base; - if (target_write_u32(target, FLASH_REG_IRQRAW(bluenrgx_info), 0x3f) != ERROR_OK) { + if (bluenrgx_write_flash_reg(bank, FLASH_REG_IRQRAW, 0x3f) != ERROR_OK) { LOG_ERROR("Register write failed"); return ERROR_FAIL; } - if (target_write_u32(target, FLASH_REG_ADDRESS(bluenrgx_info), - (address - FLASH_BASE(bluenrgx_info)) >> 2) != ERROR_OK) { + if (bluenrgx_write_flash_reg(bank, FLASH_REG_ADDRESS, + (address - bank->base) >> 2) != ERROR_OK) { LOG_ERROR("Register write failed"); return ERROR_FAIL; } - if (target_write_u32(target, FLASH_REG_COMMAND(bluenrgx_info), command) != ERROR_OK) { + if (bluenrgx_write_flash_reg(bank, FLASH_REG_COMMAND, command) != ERROR_OK) { LOG_ERROR("Register write failed"); return ERROR_FAIL; } for (int i = 0; i < 100; i++) { uint32_t value; - if (target_read_u32(target, FLASH_REG_IRQRAW(bluenrgx_info), &value)) { + if (bluenrgx_read_flash_reg(bank, FLASH_REG_IRQRAW, &value)) { LOG_ERROR("Register write failed"); return ERROR_FAIL; } @@ -222,25 +185,25 @@ static int bluenrgx_erase(struct flash_bank *bank, int first, int last) address = bank->base+i*FLASH_PAGE_SIZE(bluenrgx_info); LOG_DEBUG("address = %08x, index = %d", address, i); - if (target_write_u32(target, FLASH_REG_IRQRAW(bluenrgx_info), 0x3f) != ERROR_OK) { + if (bluenrgx_write_flash_reg(bank, FLASH_REG_IRQRAW, 0x3f) != ERROR_OK) { LOG_ERROR("Register write failed"); return ERROR_FAIL; } - if (target_write_u32(target, FLASH_REG_ADDRESS(bluenrgx_info), - (address - FLASH_BASE(bluenrgx_info)) >> 2) != ERROR_OK) { + if (bluenrgx_write_flash_reg(bank, FLASH_REG_ADDRESS, + (address - bank->base) >> 2) != ERROR_OK) { LOG_ERROR("Register write failed"); return ERROR_FAIL; } - if (target_write_u32(target, FLASH_REG_COMMAND(bluenrgx_info), command) != ERROR_OK) { + if (bluenrgx_write_flash_reg(bank, FLASH_REG_COMMAND, command) != ERROR_OK) { LOG_ERROR("Failed"); return ERROR_FAIL; } for (int j = 0; j < 100; j++) { uint32_t value; - if (target_read_u32(target, FLASH_REG_IRQRAW(bluenrgx_info), &value)) { + if (bluenrgx_read_flash_reg(bank, FLASH_REG_IRQRAW, &value)) { LOG_ERROR("Register write failed"); return ERROR_FAIL; } @@ -258,143 +221,6 @@ static int bluenrgx_erase(struct flash_bank *bank, int first, int last) } -static int bluenrgx_protect(struct flash_bank *bank, int set, int first, int last) -{ - /* Protection is only handled in software: no hardware write protection - available in BlueNRG-x devices */ - int sector; - - for (sector = first; sector <= last; sector++) - bank->sectors[sector].is_protected = set; - return ERROR_OK; -} - -static int bluenrgx_write_word(struct flash_bank *bank, uint32_t address_base, uint8_t *values, uint32_t count) -{ - int retval = ERROR_OK; - struct target *target = bank->target; - struct bluenrgx_flash_bank *bluenrgx_info = bank->driver_priv; - - retval = target_write_u32(target, FLASH_REG_IRQRAW(bluenrgx_info), 0x3f); - if (retval != ERROR_OK) { - LOG_ERROR("Register write failed, error code: %d", retval); - return retval; - } - - for (uint32_t i = 0; i < count; i++) { - uint32_t address = address_base + i * FLASH_WORD_LEN; - - retval = target_write_u32(target, FLASH_REG_ADDRESS(bluenrgx_info), - (address - FLASH_BASE(bluenrgx_info)) >> 2); - if (retval != ERROR_OK) { - LOG_ERROR("Register write failed, error code: %d", retval); - return retval; - } - - retval = target_write_buffer(target, FLASH_REG_DATA(bluenrgx_info), - FLASH_WORD_LEN, values + i * FLASH_WORD_LEN); - if (retval != ERROR_OK) { - LOG_ERROR("Register write failed, error code: %d", retval); - return retval; - } - - retval = target_write_u32(target, FLASH_REG_COMMAND(bluenrgx_info), FLASH_CMD_WRITE); - if (retval != ERROR_OK) { - LOG_ERROR("Register write failed, error code: %d", retval); - return retval; - } - - for (int j = 0; j < 100; j++) { - uint32_t reg_value; - retval = target_read_u32(target, FLASH_REG_IRQRAW(bluenrgx_info), ®_value); - - if (retval != ERROR_OK) { - LOG_ERROR("Register read failed, error code: %d", retval); - return retval; - } - - if (reg_value & FLASH_INT_CMDDONE) - break; - - if (j == 99) { - LOG_ERROR("Write command failed (timeout)"); - return ERROR_FAIL; - } - } - } - return retval; -} - -static int bluenrgx_write_bytes(struct flash_bank *bank, uint32_t address_base, uint8_t *buffer, uint32_t count) -{ - int retval = ERROR_OK; - struct target *target = bank->target; - uint8_t *new_buffer = NULL; - uint32_t pre_bytes = 0, post_bytes = 0, pre_word, post_word, pre_address, post_address; - - if (count == 0) { - /* Just return if there are no bytes to write */ - return retval; - } - - if (address_base & 3) { - pre_bytes = address_base & 3; - pre_address = address_base - pre_bytes; - } - - if ((count + pre_bytes) & 3) { - post_bytes = ((count + pre_bytes + 3) & ~3) - (count + pre_bytes); - post_address = (address_base + count) & ~3; - } - - if (pre_bytes || post_bytes) { - uint32_t old_count = count; - - count = old_count + pre_bytes + post_bytes; - - new_buffer = malloc(count); - - if (new_buffer == NULL) { - LOG_ERROR("odd number of bytes to write and no memory " - "for padding buffer"); - return ERROR_FAIL; - } - - LOG_INFO("Requested number of bytes to write and/or address not word aligned (%" PRIu32 "), extending to %" - PRIu32 " ", old_count, count); - - if (pre_bytes) { - if (target_read_u32(target, pre_address, &pre_word)) { - LOG_ERROR("Memory read failed"); - free(new_buffer); - return ERROR_FAIL; - } - - } - - if (post_bytes) { - if (target_read_u32(target, post_address, &post_word)) { - LOG_ERROR("Memory read failed"); - free(new_buffer); - return ERROR_FAIL; - } - - } - - memcpy(new_buffer, &pre_word, pre_bytes); - memcpy((new_buffer+((pre_bytes+old_count) & ~3)), &post_word, 4); - memcpy(new_buffer+pre_bytes, buffer, old_count); - buffer = new_buffer; - } - - retval = bluenrgx_write_word(bank, address_base - pre_bytes, buffer, count/4); - - if (new_buffer) - free(new_buffer); - - return retval; -} - static int bluenrgx_write(struct flash_bank *bank, const uint8_t *buffer, uint32_t offset, uint32_t count) { @@ -406,10 +232,16 @@ static int bluenrgx_write(struct flash_bank *bank, const uint8_t *buffer, struct working_area *source; uint32_t address = bank->base + offset; struct reg_param reg_params[5]; + struct mem_param mem_params[1]; struct armv7m_algorithm armv7m_info; int retval = ERROR_OK; - uint32_t pre_size = 0, fast_size = 0, post_size = 0; - uint32_t pre_offset = 0, fast_offset = 0, post_offset = 0; + + /* See contrib/loaders/flash/bluenrg-x/bluenrg-x_write.c for source and + * hints how to generate the data! + */ + static const uint8_t bluenrgx_flash_write_code[] = { +#include "../../../contrib/loaders/flash/bluenrg-x/bluenrg-x_write.inc" + }; /* check preconditions */ if (bluenrgx_info->probed == 0) @@ -427,133 +259,105 @@ static int bluenrgx_write(struct flash_bank *bank, const uint8_t *buffer, return ERROR_TARGET_NOT_HALTED; } - /* We are good here and we need to compute pre_size, fast_size, post_size */ - pre_size = MIN(count, ((offset+0xF) & ~0xF) - offset); - pre_offset = offset; - fast_size = 16*((count - pre_size) / 16); - fast_offset = offset + pre_size; - post_size = (count-pre_size-fast_size) % 16; - post_offset = fast_offset + fast_size; - - LOG_DEBUG("pre_size = %08x, pre_offset=%08x", pre_size, pre_offset); - LOG_DEBUG("fast_size = %08x, fast_offset=%08x", fast_size, fast_offset); - LOG_DEBUG("post_size = %08x, post_offset=%08x", post_size, post_offset); - - /* Program initial chunk not 16 bytes aligned */ - retval = bluenrgx_write_bytes(bank, bank->base+pre_offset, (uint8_t *) buffer, pre_size); - if (retval) { - LOG_ERROR("bluenrgx_write_bytes failed %d", retval); - return ERROR_FAIL; + if (target_alloc_working_area(target, sizeof(bluenrgx_flash_write_code), + &write_algorithm) != ERROR_OK) { + LOG_WARNING("no working area available, can't do block memory writes"); + return ERROR_TARGET_RESOURCE_NOT_AVAILABLE; } - /* Program chunk 16 bytes aligned in fast mode */ - if (fast_size) { - - if (target_alloc_working_area(target, bluenrgx_info->flash_write_code_size, - &write_algorithm) != ERROR_OK) { - LOG_WARNING("no working area available, can't do block memory writes"); - return ERROR_TARGET_RESOURCE_NOT_AVAILABLE; - } - - retval = target_write_buffer(target, write_algorithm->address, - bluenrgx_info->flash_write_code_size, - bluenrgx_info->flash_write_code); - if (retval != ERROR_OK) - return retval; + retval = target_write_buffer(target, write_algorithm->address, + sizeof(bluenrgx_flash_write_code), + bluenrgx_flash_write_code); + if (retval != ERROR_OK) + return retval; - /* memory buffer */ - if (target_alloc_working_area(target, buffer_size, &source)) { - LOG_WARNING("no large enough working area available"); - return ERROR_TARGET_RESOURCE_NOT_AVAILABLE; - } + /* memory buffer */ + if (target_alloc_working_area(target, buffer_size, &source)) { + LOG_WARNING("no large enough working area available"); + return ERROR_TARGET_RESOURCE_NOT_AVAILABLE; + } - /* Stack pointer area */ - if (target_alloc_working_area(target, 64, - &write_algorithm_sp) != ERROR_OK) { - LOG_DEBUG("no working area for write code stack pointer"); - return ERROR_TARGET_RESOURCE_NOT_AVAILABLE; - } + /* Stack pointer area */ + if (target_alloc_working_area(target, 128, + &write_algorithm_sp) != ERROR_OK) { + LOG_DEBUG("no working area for write code stack pointer"); + return ERROR_TARGET_RESOURCE_NOT_AVAILABLE; + } - armv7m_info.common_magic = ARMV7M_COMMON_MAGIC; - armv7m_info.core_mode = ARM_MODE_THREAD; - - init_reg_param(®_params[0], "r0", 32, PARAM_IN_OUT); - init_reg_param(®_params[1], "r1", 32, PARAM_OUT); - init_reg_param(®_params[2], "r2", 32, PARAM_OUT); - init_reg_param(®_params[3], "r3", 32, PARAM_OUT); - init_reg_param(®_params[4], "sp", 32, PARAM_OUT); - - /* FIFO start address (first two words used for write and read pointers) */ - buf_set_u32(reg_params[0].value, 0, 32, source->address); - /* FIFO end address (first two words used for write and read pointers) */ - buf_set_u32(reg_params[1].value, 0, 32, source->address + source->size); - /* Flash memory address */ - buf_set_u32(reg_params[2].value, 0, 32, address+pre_size); - /* Number of bytes */ - buf_set_u32(reg_params[3].value, 0, 32, fast_size); - /* Stack pointer for program working area */ - buf_set_u32(reg_params[4].value, 0, 32, write_algorithm_sp->address); - - LOG_DEBUG("source->address = " TARGET_ADDR_FMT, source->address); - LOG_DEBUG("source->address+ source->size = " TARGET_ADDR_FMT, source->address+source->size); - LOG_DEBUG("write_algorithm_sp->address = " TARGET_ADDR_FMT, write_algorithm_sp->address); - LOG_DEBUG("address = %08x", address+pre_size); - LOG_DEBUG("count = %08x", count); - - retval = target_run_flash_async_algorithm(target, - buffer+pre_size, - fast_size/16, - 16, /* Block size: we write in block of 16 bytes to enjoy burstwrite speed */ - 0, - NULL, - 5, - reg_params, - source->address, - source->size, - write_algorithm->address, - 0, - &armv7m_info); - - if (retval == ERROR_FLASH_OPERATION_FAILED) { - LOG_ERROR("error executing bluenrg-x flash write algorithm"); - - uint32_t error = buf_get_u32(reg_params[0].value, 0, 32); - - if (error != 0) - LOG_ERROR("flash write failed = %08" PRIx32, error); - } + armv7m_info.common_magic = ARMV7M_COMMON_MAGIC; + armv7m_info.core_mode = ARM_MODE_THREAD; + + init_reg_param(®_params[0], "r0", 32, PARAM_IN_OUT); + init_reg_param(®_params[1], "r1", 32, PARAM_OUT); + init_reg_param(®_params[2], "r2", 32, PARAM_OUT); + init_reg_param(®_params[3], "r3", 32, PARAM_OUT); + init_reg_param(®_params[4], "sp", 32, PARAM_OUT); + /* Put the parameter at the first available stack location */ + init_mem_param(&mem_params[0], write_algorithm_sp->address + 80, 32, PARAM_OUT); + + /* FIFO start address (first two words used for write and read pointers) */ + buf_set_u32(reg_params[0].value, 0, 32, source->address); + /* FIFO end address (first two words used for write and read pointers) */ + buf_set_u32(reg_params[1].value, 0, 32, source->address + source->size); + /* Flash memory address */ + buf_set_u32(reg_params[2].value, 0, 32, address); + /* Number of bytes */ + buf_set_u32(reg_params[3].value, 0, 32, count); + /* Stack pointer for program working area */ + buf_set_u32(reg_params[4].value, 0, 32, write_algorithm_sp->address); + /* Flash register base address */ + buf_set_u32(mem_params[0].value, 0, 32, bluenrgx_info->flash_ptr->flash_regs_base); + + LOG_DEBUG("source->address = " TARGET_ADDR_FMT, source->address); + LOG_DEBUG("source->address+ source->size = " TARGET_ADDR_FMT, source->address+source->size); + LOG_DEBUG("write_algorithm_sp->address = " TARGET_ADDR_FMT, write_algorithm_sp->address); + LOG_DEBUG("address = %08x", address); + LOG_DEBUG("count = %08x", count); + + retval = target_run_flash_async_algorithm(target, + buffer, + count/16, + 16, /* Block size: we write in block of 16 bytes to enjoy burstwrite speed */ + 1, + mem_params, + 5, + reg_params, + source->address, + source->size, + write_algorithm->address, + 0, + &armv7m_info); + + if (retval == ERROR_FLASH_OPERATION_FAILED) { + LOG_ERROR("error executing bluenrg-x flash write algorithm"); + + uint32_t error = buf_get_u32(reg_params[0].value, 0, 32); + + if (error != 0) + LOG_ERROR("flash write failed = %08" PRIx32, error); + } + if (retval == ERROR_OK) { + uint32_t rp; + /* Read back rp and check that is valid */ + retval = target_read_u32(target, source->address+4, &rp); if (retval == ERROR_OK) { - uint32_t rp; - /* Read back rp and check that is valid */ - retval = target_read_u32(target, source->address+4, &rp); - if (retval == ERROR_OK) { - if ((rp < source->address+8) || (rp > (source->address + source->size))) { - LOG_ERROR("flash write failed = %08" PRIx32, rp); - retval = ERROR_FLASH_OPERATION_FAILED; - } + if ((rp < source->address+8) || (rp > (source->address + source->size))) { + LOG_ERROR("flash write failed = %08" PRIx32, rp); + retval = ERROR_FLASH_OPERATION_FAILED; } } - target_free_working_area(target, source); - target_free_working_area(target, write_algorithm); - target_free_working_area(target, write_algorithm_sp); - - destroy_reg_param(®_params[0]); - destroy_reg_param(®_params[1]); - destroy_reg_param(®_params[2]); - destroy_reg_param(®_params[3]); - destroy_reg_param(®_params[4]); - if (retval != ERROR_OK) - return retval; - } + target_free_working_area(target, source); + target_free_working_area(target, write_algorithm); + target_free_working_area(target, write_algorithm_sp); + + destroy_reg_param(®_params[0]); + destroy_reg_param(®_params[1]); + destroy_reg_param(®_params[2]); + destroy_reg_param(®_params[3]); + destroy_reg_param(®_params[4]); + destroy_mem_param(&mem_params[0]); - /* Program chunk at end, not addressable by fast burst write algorithm */ - retval = bluenrgx_write_bytes(bank, bank->base+post_offset, - (uint8_t *) (buffer+pre_size+fast_size), post_size); - if (retval) { - LOG_ERROR("bluenrgx_write_bytes failed %d", retval); - return ERROR_FAIL; - } return retval; } @@ -567,7 +371,7 @@ static int bluenrgx_probe(struct flash_bank *bank) if (retval != ERROR_OK) return retval; - if (idcode != BLUENRGLP_IDCODE) { + if (idcode != flash_priv_data_lp.jtag_idcode) { retval = target_read_u32(bank->target, BLUENRG2_JTAG_REG, &idcode); if (retval != ERROR_OK) return retval; @@ -575,19 +379,16 @@ static int bluenrgx_probe(struct flash_bank *bank) /* Default device is BlueNRG-1 */ bluenrgx_info->flash_ptr = &flash_priv_data_1; - bluenrgx_info->flash_write_code = flash_priv_data_1.flash_write_code; - bluenrgx_info->flash_write_code_size = flash_priv_data_1.flash_write_code_size; + bank->base = flash_priv_data_1.flash_base; for (i = 0; i < (int)(sizeof(flash_ctrl)/sizeof(*flash_ctrl)); i++) { if (idcode == (*flash_ctrl[i]).jtag_idcode) { bluenrgx_info->flash_ptr = flash_ctrl[i]; - bluenrgx_info->flash_write_code = (*flash_ctrl[i]).flash_write_code; - bluenrgx_info->flash_write_code_size = (*flash_ctrl[i]).flash_write_code_size; + bank->base = (*flash_ctrl[i]).flash_base; break; } } - - retval = target_read_u32(bank->target, FLASH_SIZE_REG(bluenrgx_info), &size_info); + retval = bluenrgx_read_flash_reg(bank, FLASH_SIZE_REG, &size_info); if (retval != ERROR_OK) return retval; @@ -596,7 +397,6 @@ static int bluenrgx_probe(struct flash_bank *bank) return retval; bank->size = (size_info + 1) * FLASH_WORD_LEN; - bank->base = FLASH_BASE(bluenrgx_info); bank->num_sectors = bank->size/FLASH_PAGE_SIZE(bluenrgx_info); bank->sectors = realloc(bank->sectors, sizeof(struct flash_sector) * bank->num_sectors); @@ -650,12 +450,12 @@ const struct flash_driver bluenrgx_flash = { .name = "bluenrg-x", .flash_bank_command = bluenrgx_flash_bank_command, .erase = bluenrgx_erase, - .protect = bluenrgx_protect, + .protect = NULL, .write = bluenrgx_write, .read = default_flash_read, .probe = bluenrgx_probe, .erase_check = default_flash_blank_check, - .protect_check = bluenrgx_protect_check, + .protect_check = NULL, .auto_probe = bluenrgx_auto_probe, .info = bluenrgx_get_info, }; diff --git a/src/flash/nor/bluenrg-x.h b/src/flash/nor/bluenrg-x.h new file mode 100644 index 0000000000..3b84b8b19f --- /dev/null +++ b/src/flash/nor/bluenrg-x.h @@ -0,0 +1,45 @@ +/*************************************************************************** + * Copyright (C) 2019 by STMicroelectronics. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program. If not, see . * + ***************************************************************************/ + +#ifndef OPENOCD_FLASH_NOR_BLUENRGX_H +#define OPENOCD_FLASH_NOR_BLUENRGX_H + +/* Flash Controller registers offsets */ +#define FLASH_REG_COMMAND 0x00 +#define FLASH_REG_CONFIG 0x04 +#define FLASH_REG_IRQSTAT 0x08 +#define FLASH_REG_IRQMASK 0x0C +#define FLASH_REG_IRQRAW 0x10 +#define FLASH_REG_ADDRESS 0x18 +#define FLASH_REG_UNLOCKM 0x1C +#define FLASH_REG_UNLOCKL 0x20 +#define FLASH_REG_DATA0 0x40 +#define FLASH_REG_DATA1 0x44 +#define FLASH_REG_DATA2 0x48 +#define FLASH_REG_DATA3 0x4C +#define FLASH_SIZE_REG 0x14 + +/* Flash Controller commands */ +#define FLASH_CMD_ERASE_PAGE 0x11 +#define FLASH_CMD_MASSERASE 0x22 +#define FLASH_CMD_WRITE 0x33 +#define FLASH_CMD_BURSTWRITE 0xCC +#define FLASH_INT_CMDDONE 0x01 + +#define FLASH_WORD_LEN 4 + +#endif /* OPENOCD_FLASH_NOR_BLUENRGX_H */ diff --git a/tcl/target/bluenrg-x.cfg b/tcl/target/bluenrg-x.cfg index 691bbbf83b..a9d321ee6b 100644 --- a/tcl/target/bluenrg-x.cfg +++ b/tcl/target/bluenrg-x.cfg @@ -23,13 +23,7 @@ if { [info exists WORKAREASIZE] } { adapter speed 4000 -if { [info exists CPUTAPID] } { - set _CPUTAPID $CPUTAPID -} else { - set _CPUTAPID 0x0bb11477 -} - -swj_newdap $_CHIPNAME cpu -expected-id $_CPUTAPID +swj_newdap $_CHIPNAME cpu -expected-id 0x0bb11477 -expected-id 0x0bc11477 dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu set _TARGETNAME $_CHIPNAME.cpu