From: Andreas Kemnade <andreas@kemnade.info>
Date: Sun, 4 Mar 2018 08:07:23 +0000 (+0100)
Subject: efm32: correct erase address if bank->base != 0
X-Git-Tag: v0.11.0-rc1~949
X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=commitdiff_plain;h=e406f2b0dce0b7c6974ca715700f445e2580a36d;ds=sidebyside

efm32: correct erase address if bank->base != 0

Prepare for additional flash banks not located at address 0

Change-Id: I60b78c917f94fa52bf24df9e3315536f776eec84
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-on: http://openocd.zylin.com/4440
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
---

diff --git a/src/flash/nor/efm32.c b/src/flash/nor/efm32.c
index 1d70bd5017..8ff689cc03 100644
--- a/src/flash/nor/efm32.c
+++ b/src/flash/nor/efm32.c
@@ -429,7 +429,7 @@ static int efm32x_erase_page(struct flash_bank *bank, uint32_t addr)
 	 */
 	int ret = 0;
 	uint32_t status = 0;
-
+	addr += bank->base;
 	LOG_DEBUG("erasing flash page at 0x%08" PRIx32, addr);
 
 	ret = efm32x_write_reg_u32(bank, EFM32_MSC_REG_ADDRB, addr);