From: David Brownell <dbrownell@users.sourceforge.net>
Date: Sat, 28 Nov 2009 02:50:31 +0000 (-0800)
Subject: omap3530.cfg: use new "reset-assert" event
X-Git-Tag: v0.4.0-rc1~298
X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=commitdiff_plain;h=ddce517e3a2144e27a26090aef7ef1a7f2270af1;ds=sidebyside

omap3530.cfg: use new "reset-assert" event

Replaces previous "reset-assert-pre" workaround.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
---

diff --git a/tcl/target/omap3530.cfg b/tcl/target/omap3530.cfg
index 0a83423c68..74edd7289f 100644
--- a/tcl/target/omap3530.cfg
+++ b/tcl/target/omap3530.cfg
@@ -65,10 +65,10 @@ proc omap3_dbginit {target} {
 jtag_rclk 1000
 $_TARGETNAME configure -event "reset-start" { jtag_rclk 1000 }
 
-# REVISIT This assumes that SRST is unavailable, so we must assert reset
+# Assume SRST is unavailable (e.g. TI-14 JTAG), so we must assert reset
 # ourselves using PRM_RSTCTRL.  RST_GS (2) is a warm reset, like ICEpick
 # would issue.  RST_DPLL3 (4) is a cold reset.
 set PRM_RSTCTRL 0x48307250
-$_TARGETNAME configure -event reset-assert-pre "$_TARGETNAME mww $PRM_RSTCTRL 2"
+$_TARGETNAME configure -event reset-assert "$_TARGETNAME mww $PRM_RSTCTRL 2"
 
 $_TARGETNAME configure -event reset-assert-post "omap3_dbginit $_TARGETNAME"