From: Freddie Chopin <freddie.chopin@gmail.com>
Date: Tue, 1 May 2012 17:47:28 +0000 (+0200)
Subject: Use hardware reset and connect under reset on boards with ST-LINK/V2, as
X-Git-Tag: v0.6.0-rc1~95
X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=commitdiff_plain;h=caeb05720595287e9a9865ff5f9e764c92be152d

Use hardware reset and connect under reset on boards with ST-LINK/V2, as
now it is supported.

Change-Id: Id3b2ca9a2270974a5f453323f9057ecece400c94
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-on: http://openocd.zylin.com/609
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
---

diff --git a/tcl/board/stm320518_eval_stlink.cfg b/tcl/board/stm320518_eval_stlink.cfg
index a832984d06..804ff2c39c 100644
--- a/tcl/board/stm320518_eval_stlink.cfg
+++ b/tcl/board/stm320518_eval_stlink.cfg
@@ -13,3 +13,6 @@ set WORKAREASIZE 0x2000
 set CHIPNAME STM32F051R8T6
 
 source [find target/stm32f0x_stlink.cfg]
+
+# use hardware reset, connect under reset
+reset_config srst_only srst_nogate
diff --git a/tcl/board/stm3220g_eval_stlink.cfg b/tcl/board/stm3220g_eval_stlink.cfg
index 6ac3751f1d..578a0e8a70 100644
--- a/tcl/board/stm3220g_eval_stlink.cfg
+++ b/tcl/board/stm3220g_eval_stlink.cfg
@@ -13,3 +13,6 @@ set WORKAREASIZE 0x20000
 set CHIPNAME STM32F207IGH6
 
 source [find target/stm32f2x_stlink.cfg]
+
+# use hardware reset, connect under reset
+reset_config srst_only srst_nogate
diff --git a/tcl/board/stm3241g_eval_stlink.cfg b/tcl/board/stm3241g_eval_stlink.cfg
index d17cdd935e..4e3beb9258 100644
--- a/tcl/board/stm3241g_eval_stlink.cfg
+++ b/tcl/board/stm3241g_eval_stlink.cfg
@@ -13,3 +13,6 @@ set WORKAREASIZE 0x20000
 set CHIPNAME STM32F417IGH6
 
 source [find target/stm32f4x_stlink.cfg]
+
+# use hardware reset, connect under reset
+reset_config srst_only srst_nogate
diff --git a/tcl/board/stm32f0discovery.cfg b/tcl/board/stm32f0discovery.cfg
index 392a6e6ffe..678eea68cc 100644
--- a/tcl/board/stm32f0discovery.cfg
+++ b/tcl/board/stm32f0discovery.cfg
@@ -5,3 +5,6 @@ source [find interface/stlink-v2.cfg]
 
 set WORKAREASIZE 0x2000
 source [find target/stm32f0x_stlink.cfg]
+
+# use hardware reset, connect under reset
+reset_config srst_only srst_nogate
diff --git a/tcl/board/stm32f4discovery.cfg b/tcl/board/stm32f4discovery.cfg
index 98125e1710..ae54e18c47 100644
--- a/tcl/board/stm32f4discovery.cfg
+++ b/tcl/board/stm32f4discovery.cfg
@@ -4,3 +4,6 @@
 source [find interface/stlink-v2.cfg]
 
 source [find target/stm32f4x_stlink.cfg]
+
+# use hardware reset, connect under reset
+reset_config srst_only srst_nogate
diff --git a/tcl/board/stm32ldiscovery.cfg b/tcl/board/stm32ldiscovery.cfg
index 9f47073111..a8eac815ec 100644
--- a/tcl/board/stm32ldiscovery.cfg
+++ b/tcl/board/stm32ldiscovery.cfg
@@ -4,3 +4,6 @@
 source [find interface/stlink-v2.cfg]
 
 source [find target/stm32lx_stlink.cfg]
+
+# use hardware reset, connect under reset
+reset_config srst_only srst_nogate