From: David Brownell Date: Sat, 28 Nov 2009 18:40:26 +0000 (-0800) Subject: target: uplevel add_{break,watch}point() error checks X-Git-Tag: v0.4.0-rc1~295 X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=commitdiff_plain;h=acbe054a38a45432f5948026e1e9258b4e2910c2 target: uplevel add_{break,watch}point() error checks In target_type.h it's documented that the target must be halted for add_breakpoint() ... and with slight ambiguity, also for its add_watchpoint() sibling. So rather than verifying that constraint in the CPU drivers, do it in the target_add_{break,watch}point() routines. Add minor paranoia on the remove_*point() paths too: save the return value, and print it out in in the LOG_DEBUG message in case it's nonzero. Note that with some current cores, like all ARMv7 ones I've looked at, there's no technical issue preventing watchpoint or breakpoint add/remove operations on active cores. This model seems deeply wired into OpenOCD though. ALSO: the ARM targets were fairly "good" about enforcing that constraint themselves. The MIPS ones were relied on other code to catch such stuff, but it's not clear such code existed ... keep an eye out for new issues on MIPS. Signed-off-by: David Brownell --- diff --git a/src/target/arm7_9_common.c b/src/target/arm7_9_common.c index f7b86693d2..b5553cd801 100644 --- a/src/target/arm7_9_common.c +++ b/src/target/arm7_9_common.c @@ -426,12 +426,6 @@ int arm7_9_add_breakpoint(struct target *target, struct breakpoint *breakpoint) { struct arm7_9_common *arm7_9 = target_to_arm7_9(target); - if (target->state != TARGET_HALTED) - { - LOG_WARNING("target not halted"); - return ERROR_TARGET_NOT_HALTED; - } - if (arm7_9->breakpoint_count == 0) { /* make sure we don't have any dangling breakpoints. This is vital upon @@ -631,12 +625,6 @@ int arm7_9_add_watchpoint(struct target *target, struct watchpoint *watchpoint) { struct arm7_9_common *arm7_9 = target_to_arm7_9(target); - if (target->state != TARGET_HALTED) - { - LOG_WARNING("target not halted"); - return ERROR_TARGET_NOT_HALTED; - } - if (arm7_9->wp_available < 1) { return ERROR_TARGET_RESOURCE_NOT_AVAILABLE; diff --git a/src/target/breakpoints.c b/src/target/breakpoints.c index 16ab7e0caa..2542c41a6f 100644 --- a/src/target/breakpoints.c +++ b/src/target/breakpoints.c @@ -109,6 +109,7 @@ static void breakpoint_free(struct target *target, struct breakpoint *breakpoint { struct breakpoint *breakpoint = target->breakpoints; struct breakpoint **breakpoint_p = &target->breakpoints; + int retval; while (breakpoint) { @@ -121,9 +122,9 @@ static void breakpoint_free(struct target *target, struct breakpoint *breakpoint if (breakpoint == NULL) return; - target_remove_breakpoint(target, breakpoint); + retval = target_remove_breakpoint(target, breakpoint); - LOG_DEBUG("BPID: %d", breakpoint->unique_id ); + LOG_DEBUG("free BPID: %d --> %d", breakpoint->unique_id, retval); (*breakpoint_p) = breakpoint->next; free(breakpoint->orig_instr); free(breakpoint); @@ -249,6 +250,7 @@ static void watchpoint_free(struct target *target, struct watchpoint *watchpoint { struct watchpoint *watchpoint = target->watchpoints; struct watchpoint **watchpoint_p = &target->watchpoints; + int retval; while (watchpoint) { @@ -260,8 +262,8 @@ static void watchpoint_free(struct target *target, struct watchpoint *watchpoint if (watchpoint == NULL) return; - target_remove_watchpoint(target, watchpoint); - LOG_DEBUG("WPID: %d", watchpoint->unique_id ); + retval = target_remove_watchpoint(target, watchpoint); + LOG_DEBUG("free WPID: %d --> %d", watchpoint->unique_id, retval); (*watchpoint_p) = watchpoint->next; free(watchpoint); } diff --git a/src/target/cortex_m3.c b/src/target/cortex_m3.c index 7cfe540a38..ad59c785ce 100644 --- a/src/target/cortex_m3.c +++ b/src/target/cortex_m3.c @@ -1141,13 +1141,6 @@ cortex_m3_add_watchpoint(struct target *target, struct watchpoint *watchpoint) { struct cortex_m3_common *cortex_m3 = target_to_cm3(target); - /* REVISIT why check? DWT can be updated with core running ... */ - if (target->state != TARGET_HALTED) - { - LOG_WARNING("target not halted"); - return ERROR_TARGET_NOT_HALTED; - } - if (cortex_m3->dwt_comp_available < 1) { LOG_DEBUG("no comparators?"); diff --git a/src/target/target.c b/src/target/target.c index a2bd88689c..28387f447e 100644 --- a/src/target/target.c +++ b/src/target/target.c @@ -606,6 +606,10 @@ int target_bulk_write_memory(struct target *target, int target_add_breakpoint(struct target *target, struct breakpoint *breakpoint) { + if (target->state != TARGET_HALTED) { + LOG_WARNING("target %s is not halted", target->cmd_name); + return ERROR_TARGET_NOT_HALTED; + } return target->type->add_breakpoint(target, breakpoint); } int target_remove_breakpoint(struct target *target, @@ -617,6 +621,10 @@ int target_remove_breakpoint(struct target *target, int target_add_watchpoint(struct target *target, struct watchpoint *watchpoint) { + if (target->state != TARGET_HALTED) { + LOG_WARNING("target %s is not halted", target->cmd_name); + return ERROR_TARGET_NOT_HALTED; + } return target->type->add_watchpoint(target, watchpoint); } int target_remove_watchpoint(struct target *target, diff --git a/src/target/target_type.h b/src/target/target_type.h index 333b58b41f..d141608b41 100644 --- a/src/target/target_type.h +++ b/src/target/target_type.h @@ -124,18 +124,24 @@ struct target_type * Target must be halted while this is invoked as this * will actually set up breakpoints on target. * - * The breakpoint hardware will be set up upon adding the first breakpoint. + * The breakpoint hardware will be set up upon adding the + * first breakpoint. * * Upon GDB connection all breakpoints/watchpoints are cleared. */ int (*add_breakpoint)(struct target *target, struct breakpoint *breakpoint); - /* remove breakpoint. hw will only be updated if the target is currently halted. + /* remove breakpoint. hw will only be updated if the target + * is currently halted. * However, this method can be invoked on unresponsive targets. */ int (*remove_breakpoint)(struct target *target, struct breakpoint *breakpoint); + + /* add watchpoint ... see add_breakpoint() comment above. */ int (*add_watchpoint)(struct target *target, struct watchpoint *watchpoint); - /* remove watchpoint. hw will only be updated if the target is currently halted. + + /* remove watchpoint. hw will only be updated if the target + * is currently halted. * However, this method can be invoked on unresponsive targets. */ int (*remove_watchpoint)(struct target *target, struct watchpoint *watchpoint); diff --git a/src/target/xscale.c b/src/target/xscale.c index 1a18ab85aa..49653a96ee 100644 --- a/src/target/xscale.c +++ b/src/target/xscale.c @@ -2137,12 +2137,6 @@ static int xscale_add_breakpoint(struct target *target, { struct xscale_common *xscale = target_to_xscale(target); - if (target->state != TARGET_HALTED) - { - LOG_WARNING("target not halted"); - return ERROR_TARGET_NOT_HALTED; - } - if ((breakpoint->type == BKPT_HARD) && (xscale->ibcr_available < 1)) { LOG_INFO("no breakpoint unit available for hardware breakpoint"); @@ -2300,12 +2294,6 @@ static int xscale_add_watchpoint(struct target *target, { struct xscale_common *xscale = target_to_xscale(target); - if (target->state != TARGET_HALTED) - { - LOG_WARNING("target not halted"); - return ERROR_TARGET_NOT_HALTED; - } - if (xscale->dbr_available < 1) { return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;