From: Tarek BOCHKATI Date: Mon, 6 Jan 2020 16:19:31 +0000 (+0100) Subject: flash/nor: add support of STM32WB on top STM32L4 flash driver X-Git-Tag: v0.11.0-rc1~514 X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=commitdiff_plain;h=a6a642bf72a12c9a1fc4b92de2dc46d12cb3b58e flash/nor: add support of STM32WB on top STM32L4 flash driver Change-Id: I9fb6700085d817d35a691f6484193f67939a4e0f Signed-off-by: Laurent LEMELE Signed-off-by: Tarek BOCHKATI Reviewed-on: http://openocd.zylin.com/4933 Tested-by: jenkins Reviewed-by: Tomas Vanek --- diff --git a/doc/openocd.texi b/doc/openocd.texi index b79325276d..c526a632a7 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -6869,7 +6869,7 @@ The @var{num} parameter is a value shown by @command{flash banks}. @end deffn @deffn {Flash Driver} stm32l4x -All members of the STM32L4 microcontroller families from STMicroelectronics +All members of the STM32L4 and STM32WB microcontroller families from STMicroelectronics include internal flash and use ARM Cortex-M4 cores. The driver automatically recognizes a number of these chips using the chip identification register, and autoconfigures itself. @@ -6911,7 +6911,9 @@ is the register offset of the Option byte to read. For example to read the FLASH_OPTR register: @example stm32l4x option_read 0 0x20 -# Option Register: <0x40022020> = 0xffeff8aa +# Option Register (for STM32L4x): <0x40022020> = 0xffeff8aa +# Option Register (for STM32WBx): <0x58004020> = ... +# The correct flash base address will be used automatically @end example The above example will read out the FLASH_OPTR register which contains the RDP diff --git a/src/flash/nor/stm32l4x.c b/src/flash/nor/stm32l4x.c index 9057872ac5..a373f11686 100644 --- a/src/flash/nor/stm32l4x.c +++ b/src/flash/nor/stm32l4x.c @@ -169,6 +169,10 @@ static const struct stm32l4_rev stm32_470_revs[] = { { 0x1000, "A" }, { 0x1001, "Z" }, { 0x1003, "Y" }, { 0x100F, "W" }, }; +static const struct stm32l4_rev stm32_495_revs[] = { + { 0x2001, "2.1" }, +}; + static const struct stm32l4_part_info stm32l4_parts[] = { { .id = 0x415, @@ -230,6 +234,16 @@ static const struct stm32l4_part_info stm32l4_parts[] = { .flash_regs_base = 0x40022000, .fsize_addr = 0x1FFF75E0, }, + { + .id = 0x495, + .revs = stm32_495_revs, + .num_revs = ARRAY_SIZE(stm32_495_revs), + .device_str = "STM32WB5x", + .max_flash_size_kb = 1024, + .has_dual_bank = false, + .flash_regs_base = 0x58004000, + .fsize_addr = 0x1FFF75E0, + }, }; /* flash bank stm32l4x 0 0 */ @@ -714,7 +728,7 @@ static int stm32l4_probe(struct flash_bank *bank) } if (!stm32l4_info->part_info) { - LOG_WARNING("Cannot identify target as an STM32L4 family device."); + LOG_WARNING("Cannot identify target as an STM32 L4 or WB family device."); return ERROR_FAIL; } @@ -804,6 +818,12 @@ static int stm32l4_probe(struct flash_bank *bank) stm32l4_info->bank1_sectors = num_pages / 2; } break; + case 0x495: + /* single bank flash */ + page_size = 4096; + num_pages = flash_size_in_kb / 4; + stm32l4_info->bank1_sectors = num_pages; + break; default: LOG_ERROR("unsupported device"); return ERROR_FAIL; @@ -881,7 +901,7 @@ static int get_stm32l4_info(struct flash_bank *bank, char *buf, int buf_size) part_info->device_str, rev_id); return ERROR_OK; } else { - snprintf(buf, buf_size, "Cannot identify target as a STM32L4x device"); + snprintf(buf, buf_size, "Cannot identify target as an STM32 L4 or WB device"); return ERROR_FAIL; } diff --git a/tcl/target/stm32wbx.cfg b/tcl/target/stm32wbx.cfg new file mode 100644 index 0000000000..138bcf186b --- /dev/null +++ b/tcl/target/stm32wbx.cfg @@ -0,0 +1,103 @@ +# script for stm32wbx family + +# +# stm32wb devices support both JTAG and SWD transports. +# +source [find target/swj-dp.tcl] +source [find mem_helper.tcl] + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME stm32wbx +} + +set _ENDIAN little + +# Work-area is a space in RAM used for flash programming +# By default use 64kB +if { [info exists WORKAREASIZE] } { + set _WORKAREASIZE $WORKAREASIZE +} else { + set _WORKAREASIZE 0x10000 +} + +#jtag scan chain +if { [info exists CPUTAPID] } { + set _CPUTAPID $CPUTAPID +} else { + if { [using_jtag] } { + set _CPUTAPID 0x6ba00477 + } else { + # SWD IDCODE (single drop, arm) + set _CPUTAPID 0x6ba02477 + } +} + +swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID +dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu + +if {[using_jtag]} { + jtag newtap $_CHIPNAME bs -irlen 5 +} + +set _TARGETNAME $_CHIPNAME.cpu +target create $_TARGETNAME cortex_m -endian $_ENDIAN -dap $_CHIPNAME.dap + +$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0 + +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME stm32l4x 0 0 0 0 $_TARGETNAME + +# Common knowledges tells JTAG speed should be <= F_CPU/6. +# F_CPU after reset is MSI 4MHz, so use F_JTAG = 500 kHz to stay on +# the safe side. +# +# Note that there is a pretty wide band where things are +# more or less stable, see http://openocd.zylin.com/#/c/3366/ +adapter_khz 500 + +adapter_nsrst_delay 100 +if {[using_jtag]} { + jtag_ntrst_delay 100 +} + +reset_config srst_nogate + +if {![using_hla]} { + # if srst is not fitted use SYSRESETREQ to + # perform a soft reset + cortex_m reset_config sysresetreq +} + +$_TARGETNAME configure -event reset-init { + # CPU comes out of reset with MSI_ON | MSI_RDY | MSI Range 4 MHz. + # Configure system to use MSI 24 MHz clock, compliant with VOS default Range1. + # 2 WS compliant with VOS=Range1 and 24 MHz. + mmw 0x58004000 0x00000102 0 ;# FLASH_ACR |= PRFTBE | 2(Latency) + mmw 0x58000000 0x00000091 0 ;# RCC_CR = MSI_ON | MSI Range 24 MHz + # Boost JTAG frequency + adapter_khz 4000 +} + +$_TARGETNAME configure -event reset-start { + # Reset clock is MSI (4 MHz) + adapter_khz 500 +} + +$_TARGETNAME configure -event examine-end { + # Enable debug during low power modes (uses more power) + # DBGMCU_CR |= DBG_STANDBY | DBG_STOP | DBG_SLEEP + mmw 0xE0042004 0x00000007 0 + + # Stop watchdog counters during halt + # DBGMCU_APB1_FZR1 |= DBG_IWDG_STOP | DBG_WWDG_STOP + mmw 0xE004203C 0x00001800 0 +} + +$_TARGETNAME configure -event trace-config { + # Set TRACE_IOEN; TRACE_MODE is set to async; when using sync + # change this value accordingly to configure trace pins + # assignment + mmw 0xE0042004 0x00000020 0 +}