From: zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>
Date: Thu, 2 Jul 2009 04:55:35 +0000 (+0000)
Subject: David Brownell <david-b@pacbell.net>:
X-Git-Tag: v0.2.0~68
X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=commitdiff_plain;h=6d08c1800c7d313c3e6be9fe2c7124df02749665

David Brownell <david-b@pacbell.net>:

Prepare the DaVinci PLL code to support the version 0x0E module
used in newer chips (e.g. dm365):  rename the original code so
it's specific to version 0x02 PLL modules, and update the dm355evm
code to use that new name.

Fix two minor bugs in that version 2 code:  sysclk3 setup used
the sysclk2 divider address (affecting video processing on dm355,
no worry for now) and sysclk2 setup had a syntax error.

Also minor fixups to dm355evm, mostly to permit use of RTCK.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2447 b42882b7-edfa-0310-969c-e2dbd0fdcd60
---

diff --git a/tcl/board/dm355evm.cfg b/tcl/board/dm355evm.cfg
index 9e6dc73ba5..9b32ef9e2e 100644
--- a/tcl/board/dm355evm.cfg
+++ b/tcl/board/dm355evm.cfg
@@ -1,4 +1,3 @@
-#
 # DM355 EVM board
 #   http://focus.ti.com/docs/toolsw/folders/print/tmdsevm355.html
 #   http://c6000.spectrumdigital.com/evmdm355/
@@ -22,7 +21,7 @@ proc dm355evm_init {} {
 	puts "Initialize DM355 EVM board"
 
 	# CLKIN	= 24 MHz ... can't talk quickly to ARM yet
-	jtag_khz 1500
+	jtag_rclk 1500
 
 	########################
 	# PLL1		= 432 MHz (/8, x144)
@@ -37,10 +36,10 @@ proc dm355evm_init {} {
 	set pll_divs [dict create]
 	dict set pll_divs div3 16
 	dict set pll_divs div4 8
-	pll_setup $addr 144 $pll_divs
+	pll_v02_setup $addr 144 $pll_divs
 
 	# ARM is now running at 216 MHz, so JTAG can go faster
-	jtag_khz 20000
+	jtag_rclk 20000
 
 	########################
 	# PLL2		= 342 MHz (/8, x114)
@@ -50,7 +49,7 @@ proc dm355evm_init {} {
 	set addr [dict get $dm355 pllc2]
 	set pll_divs [dict create]
 	dict set pll_divs prediv 8
-	pll_setup $addr 114 $pll_divs
+	pll_v02_setup $addr 114 $pll_divs
 
 	########################
 	# PINMUX
diff --git a/tcl/target/davinci.cfg b/tcl/target/davinci.cfg
index 0a3da27d50..07a26b21c1 100644
--- a/tcl/target/davinci.cfg
+++ b/tcl/target/davinci.cfg
@@ -31,12 +31,10 @@ proc mmw {reg setbits clearbits} {
 # For PLLs that don't have a given register (e.g. plldiv8), or where a
 # given divider is non-programmable, caller provides *NO* config mapping.
 #
-# REVISIT there are minor differences between the PLL controllers.
-# Handle those; maybe check the ID register.  This version behaves
-# for at least the dm355.  On dm6446 and dm357 the PLLRST polarity
-# is different.  On dm365 there are more changes.
-#
-proc pll_setup {pll_addr mult config} {
+
+# PLL version 0x02: tested on dm355
+# REVISIT:  On dm6446 and dm357 the PLLRST polarity is different.
+proc pll_v02_setup {pll_addr mult config} {
 	set pll_ctrl_addr [expr $pll_addr + 0x100]
 	set pll_ctrl [mrw $pll_ctrl_addr]
 
@@ -98,7 +96,7 @@ proc pll_setup {pll_addr mult config} {
 		set go 1
 	}
 	if { [dict exists $config div2] } {
-		1et div [dict get $config div2]
+		set div [dict get $config div2]
 		set div [expr 0x8000 | ($div - 1)]
 		mww [expr $pll_addr + 0x011c] $div
 		set go 1
@@ -106,7 +104,7 @@ proc pll_setup {pll_addr mult config} {
 	if { [dict exists $config div3] } {
 		set div [dict get $config div3]
 		set div [expr 0x8000 | ($div - 1)]
-		mww [expr $pll_addr + 0x011c] $div
+		mww [expr $pll_addr + 0x0120] $div
 		set go 1
 	}
 	if { [dict exists $config div4] } {