From: Paul Fertser <fercerpav@gmail.com>
Date: Wed, 3 Apr 2019 15:31:57 +0000 (+0200)
Subject: flash/nor: use command_print() in command "flash banks"
X-Git-Tag: v0.11.0-rc1~680
X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=commitdiff_plain;h=2caa3455ada686baea01a50d092e4244c461e101

flash/nor: use command_print() in command "flash banks"

The command uses LOG_USER() instead of command_print().
Fix it.

This change was part of http://openocd.zylin.com/1815 from Paul
Fertser and has been extracted and rebased to simplify the review.

Change-Id: I92e5e5954a75b96093b3ed6af73a7536c063b639
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5083
Tested-by: jenkins
---

diff --git a/src/flash/nor/tcl.c b/src/flash/nor/tcl.c
index 0daa531b8f..b336cffda7 100644
--- a/src/flash/nor/tcl.c
+++ b/src/flash/nor/tcl.c
@@ -1167,7 +1167,7 @@ COMMAND_HANDLER(handle_flash_banks_command)
 
 	unsigned n = 0;
 	for (struct flash_bank *p = flash_bank_list(); p; p = p->next, n++) {
-		LOG_USER("#%d : %s (%s) at " TARGET_ADDR_FMT ", size 0x%8.8" PRIx32 ", "
+		command_print(CMD, "#%d : %s (%s) at " TARGET_ADDR_FMT ", size 0x%8.8" PRIx32 ", "
 			"buswidth %u, chipwidth %u", p->bank_number,
 			p->name, p->driver->name, p->base, p->size,
 			p->bus_width, p->chip_width);