From: Paul Fertser Date: Sun, 22 Sep 2013 18:09:26 +0000 (+0400) Subject: board: add TM4C123G LaunchPad config X-Git-Tag: v0.8.0-rc1~234 X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=commitdiff_plain;h=24099b4c144f1c6d1244b8b4d98c0fd69c9ff2fc board: add TM4C123G LaunchPad config Almost the same as the LM4F120 LaunchPad but the chip is using the new naming scheme (Tiva C series), supports USB OTG and has some new PWM hardware blocks. Change-Id: I6a7b2df76768766471f366cddaf64df3cc63f5f2 Signed-off-by: Paul Fertser Reviewed-on: http://openocd.zylin.com/1647 Tested-by: jenkins Reviewed-by: Spencer Oliver --- diff --git a/tcl/board/ek-tm4c123gxl.cfg b/tcl/board/ek-tm4c123gxl.cfg new file mode 100644 index 0000000000..f7b7d9f762 --- /dev/null +++ b/tcl/board/ek-tm4c123gxl.cfg @@ -0,0 +1,11 @@ +# +# TI Tiva C Series ek-tm4c123gxl Launchpad Evaluation Kit +# +# http://www.ti.com/tool/ek-tm4c123gxl +# + +source [find interface/ti-icdi.cfg] + +set WORKAREASIZE 0x8000 +set CHIPNAME tm4c123gh6pm +source [find target/stellaris_icdi.cfg]