From: Richard Uhler Date: Thu, 25 Aug 2011 20:29:33 +0000 (-0700) Subject: Implementation of a new jtag remote_bitbang driver. X-Git-Tag: v0.6.0-rc1~577 X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=commitdiff_plain;h=1411ad11c182d02769bb0954f7f5b01d66652a6b Implementation of a new jtag remote_bitbang driver. The driver sends ascii encoded bitbang commands over unix sockets or TCP to another process. This driver is useful for debugging software running on processors which are being simulated. --- diff --git a/configure.ac b/configure.ac index b6c04ab4dd..ec51bd7e27 100644 --- a/configure.ac +++ b/configure.ac @@ -498,6 +498,10 @@ if test $build_zy1000 = yes; then fi AC_MSG_RESULT($build_zy1000) +AC_ARG_ENABLE(remote-bitbang, + AS_HELP_STRING([--enable-remote-bitbang], [Enable building support for the Remote Bitbang jtag driver]), + [build_remote_bitbang=$enableval], [build_remote_bitbang=no]) + AC_MSG_CHECKING([whether to enable dummy minidriver]) if test $build_minidriver_dummy = yes; then @@ -778,6 +782,13 @@ if test "$use_internal_jimtcl" = yes; then fi fi +if test $build_remote_bitbang = yes; then + build_bitbang=yes + AC_DEFINE(BUILD_REMOTE_BITBANG, 1, [1 if you want the Remote Bitbang JTAG driver.]) +else + AC_DEFINE(BUILD_REMOTE_BITBNAG, 0, [0 if you don't want the Remote Bitbang JTAG driver.]) +fi + #-- Deal with MingW/Cygwin FTD2XX issues if test $is_win32 = yes; then @@ -1075,6 +1086,7 @@ AM_CONDITIONAL(VSLLINK, test $build_vsllink = yes) AM_CONDITIONAL(RLINK, test $build_rlink = yes) AM_CONDITIONAL(ULINK, test $build_ulink = yes) AM_CONDITIONAL(ARMJTAGEW, test $build_armjtagew = yes) +AM_CONDITIONAL(REMOTE_BITBANG, test $build_remote_bitbang = yes) AM_CONDITIONAL(BUSPIRATE, test $build_buspirate = yes) AM_CONDITIONAL(USB, test $build_usb = yes) AM_CONDITIONAL(IS_CYGWIN, test $is_cygwin = yes) diff --git a/doc/manual/jtag/drivers/remote_bitbang.txt b/doc/manual/jtag/drivers/remote_bitbang.txt new file mode 100644 index 0000000000..5a800479d7 --- /dev/null +++ b/doc/manual/jtag/drivers/remote_bitbang.txt @@ -0,0 +1,53 @@ +/** @remote_bitbangpage OpenOCD Developer's Guide + +The remote_bitbang JTAG driver is used to drive JTAG from a remote process. The +remote_bitbang driver communicates via TCP or UNIX sockets with some remote +process using an ASCII encoding of the bitbang interface. The remote process +presumably then drives the JTAG however it pleases. The remote process should +act as a server, listening for connections from the openocd remote_bitbang +driver. + +The remote bitbang driver is useful for debugging software running on +processors which are being simulated. + +The bitbang interface consists of the following functions. + +blink on + Blink a light somewhere. The argument on is either 1 or 0. + +read + Sample the value of tdo. + +write tck tms tdi + Set the value of tck, tms, and tdi. + +reset trst srst + Set the value of trst, srst. + +An additional function, quit, is added to the remote_bitbang interface to +indicate there will be no more requests and the connection with the remote +driver should be closed. + +These five functions are encoded in ascii by assigning a single character to +each possible request. The assignments are: + + B - Blink on + b - Blink off + R - Read request + Q - Quit request + 0 - Write 0 0 0 + 1 - Write 0 0 1 + 2 - Write 0 1 0 + 3 - Write 0 1 1 + 4 - Write 1 0 0 + 5 - Write 1 0 1 + 6 - Write 1 1 0 + 7 - Write 1 1 1 + r - Reset 0 0 + s - Reset 0 1 + t - Reset 1 0 + u - Reset 1 1 + +The read response is encoded in ascii as either digit 0 or 1. + + */ diff --git a/doc/openocd.texi b/doc/openocd.texi index 8b7e58887b..05c06b8759 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -2321,6 +2321,43 @@ ft2232_vid_pid 0x0403 0xbdc8 @end example @end deffn +@deffn {Interface Driver} {remote_bitbang} +Drive JTAG from a remote process. This sets up a UNIX or TCP socket connection +with a remote process and sends ASCII encoded bitbang requests to that process +instead of directly driving JTAG. + +The remote_bitbang driver is useful for debugging software running on +processors which are being simulated. + +@deffn {Config Command} {remote_bitbang_port} number +Specifies the TCP port of the remote process to connect to or 0 to use UNIX +sockets instead of TCP. +@end deffn + +@deffn {Config Command} {remote_bitbang_host} hostname +Specifies the hostname of the remote process to connect to using TCP, or the +name of the UNIX socket to use if remote_bitbang_port is 0. +@end deffn + +For example, to connect remotely via TCP to the host foobar you might have +something like: + +@example +interface remote_bitbang +remote_bitbang_port 3335 +remote_bitbang_host foobar +@end example + +To connect to another process running locally via UNIX sockets with socket +named mysocket: + +@example +interface remote_bitbang +remote_bitbang_port 0 +remote_bitbang_host mysocket +@end example +@end deffn + @deffn {Interface Driver} {usb_blaster} USB JTAG/USB-Blaster compatibles over one of the userspace libraries for FTDI chips. These interfaces have several commands, used to diff --git a/src/jtag/drivers/Makefile.am b/src/jtag/drivers/Makefile.am index 805d1a4902..408ea81009 100644 --- a/src/jtag/drivers/Makefile.am +++ b/src/jtag/drivers/Makefile.am @@ -81,6 +81,9 @@ endif if BUSPIRATE DRIVERFILES += buspirate.c endif +if REMOTE_BITBANG +DRIVERFILES += remote_bitbang.c +endif noinst_HEADERS = \ bitbang.h \ diff --git a/src/jtag/drivers/remote_bitbang.c b/src/jtag/drivers/remote_bitbang.c new file mode 100644 index 0000000000..d3ab1b11d3 --- /dev/null +++ b/src/jtag/drivers/remote_bitbang.c @@ -0,0 +1,286 @@ +/*************************************************************************** + * Copyright (C) 2011 by Richard Uhler * + * ruhler@mit.edu * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the * + * Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + ***************************************************************************/ +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include +#include +#include +#include +#include "bitbang.h" + +// from unix man page and sys/un.h: +#define UNIX_PATH_MAX 108 + +// arbitrary limit on host name length: +#define REMOTE_BITBANG_HOST_MAX 255 + +#define REMOTE_BITBANG_RAISE_ERROR(expr ...) \ + LOG_ERROR(expr); LOG_ERROR("Terminating openocd."); exit(-1); + +static char remote_bitbang_host[REMOTE_BITBANG_HOST_MAX] = "openocd"; +static uint16_t remote_bitbang_port = 0; + +FILE* remote_bitbang_in; +FILE* remote_bitbang_out; + +static void remote_bitbang_putc(int c) +{ + if (EOF == fputc(c, remote_bitbang_out)) { + REMOTE_BITBANG_RAISE_ERROR("remote_bitbang_putc: %s", strerror(errno)); + } +} + +static int remote_bitbang_quit(void) +{ + if (EOF == fputc('Q', remote_bitbang_out)) { + LOG_ERROR("fputs: %s", strerror(errno)); + return ERROR_FAIL; + } + + if (EOF == fflush(remote_bitbang_out)) { + LOG_ERROR("fflush: %s", strerror(errno)); + return ERROR_FAIL; + } + + // We only need to close one of the FILE*s, because they both use the same + // underlying file descriptor. + if (EOF == fclose(remote_bitbang_out)) { + LOG_ERROR("fclose: %s", strerror(errno)); + return ERROR_FAIL; + } + + LOG_INFO("remote_bitbang interface quit"); + return ERROR_OK; +} + +// Get the next read response. +static int remote_bitbang_rread(void) +{ + if (EOF == fflush(remote_bitbang_out)) { + remote_bitbang_quit(); + REMOTE_BITBANG_RAISE_ERROR("fflush: %s", strerror(errno)); + } + + int c = fgetc(remote_bitbang_in); + switch (c) { + case '0': return 0; + case '1': return 1; + default: + remote_bitbang_quit(); + REMOTE_BITBANG_RAISE_ERROR( + "remote_bitbang: invalid read response: %c(%i)", c, c); + } +} + +static int remote_bitbang_read(void) +{ + remote_bitbang_putc('R'); + return remote_bitbang_rread(); +} + +static void remote_bitbang_write(int tck, int tms, int tdi) +{ + char c = '0' + ((tck ? 0x4 : 0x0) | (tms ? 0x2 : 0x0) | (tdi ? 0x1 : 0x0)); + remote_bitbang_putc(c); +} + +static void remote_bitbang_reset(int trst, int srst) +{ + char c = 'r' + ((trst ? 0x2 : 0x0) | (srst ? 0x1 : 0x0)); + remote_bitbang_putc(c); +} + +static void remote_bitbang_blink(int on) +{ + char c = on ? 'B' : 'b'; + remote_bitbang_putc(c); +} + +static struct bitbang_interface remote_bitbang_bitbang = { + .read = &remote_bitbang_read, + .write = &remote_bitbang_write, + .reset = &remote_bitbang_reset, + .blink = &remote_bitbang_blink, +}; + +static int remote_bitbang_speed(int speed) +{ + return ERROR_OK; +} + +static int remote_bitbang_init_tcp(void) +{ + LOG_INFO("Connecting to %s:%i", remote_bitbang_host, remote_bitbang_port); + int fd = socket(PF_INET, SOCK_STREAM, 0); + if (fd < 0) { + LOG_ERROR("socket: %s", strerror(errno)); + return ERROR_FAIL; + } + + struct hostent* hent = gethostbyname(remote_bitbang_host); + if (hent == NULL) { + char* errorstr = "???"; + switch (h_errno) { + case HOST_NOT_FOUND: errorstr = "host not found"; break; + case NO_ADDRESS: errorstr = "no address"; break; + case NO_RECOVERY: errorstr = "no recovery"; break; + case TRY_AGAIN: errorstr = "try again"; break; + } + LOG_ERROR("gethostbyname: %s", errorstr); + return ERROR_FAIL; + } + + struct sockaddr_in addr; + addr.sin_family = AF_INET; + addr.sin_port = htons(remote_bitbang_port); + addr.sin_addr = *(struct in_addr*)hent->h_addr; + if (connect(fd, (struct sockaddr*)&addr, sizeof(struct sockaddr_in)) < 0) { + LOG_ERROR("connect: %s", strerror(errno)); + return ERROR_FAIL; + } + + remote_bitbang_in = fdopen(fd, "r"); + if (remote_bitbang_in == NULL) { + LOG_ERROR("fdopen: failed to open read stream"); + return ERROR_FAIL; + } + + remote_bitbang_out = fdopen(fd, "w"); + if (remote_bitbang_out == NULL) { + LOG_ERROR("fdopen: failed to open write stream"); + return ERROR_FAIL; + } + + LOG_INFO("remote_bitbang driver initialized"); + return ERROR_OK; +} + +static int remote_bitbang_init_unix(void) +{ + LOG_INFO("Connecting to unix socket %s", remote_bitbang_host); + int fd = socket(PF_UNIX, SOCK_STREAM, 0); + if (fd < 0) { + LOG_ERROR("socket: %s", strerror(errno)); + return ERROR_FAIL; + } + + struct sockaddr_un addr; + addr.sun_family = AF_UNIX; + strncpy(addr.sun_path, remote_bitbang_host, UNIX_PATH_MAX); + addr.sun_path[UNIX_PATH_MAX-1] = '\0'; + + if (connect(fd, (struct sockaddr*)&addr, sizeof(struct sockaddr_un)) < 0) { + LOG_ERROR("connect: %s", strerror(errno)); + return ERROR_FAIL; + } + + remote_bitbang_in = fdopen(fd, "r"); + if (remote_bitbang_in == NULL) { + LOG_ERROR("fdopen: failed to open read stream"); + return ERROR_FAIL; + } + + remote_bitbang_out = fdopen(fd, "w"); + if (remote_bitbang_out == NULL) { + LOG_ERROR("fdopen: failed to open write stream"); + return ERROR_FAIL; + } + + LOG_INFO("remote_bitbang driver initialized"); + return ERROR_OK; +} + +static int remote_bitbang_init(void) +{ + bitbang_interface = &remote_bitbang_bitbang; + + LOG_INFO("Initializing remote_bitbang driver"); + if (remote_bitbang_port == 0) { + return remote_bitbang_init_unix(); + } + return remote_bitbang_init_tcp(); +} + +static int remote_bitbang_khz(int khz, int* jtag_speed) +{ + *jtag_speed = 0; + return ERROR_OK; +} + +static int remote_bitbang_speed_div(int speed, int* khz) +{ + // I don't think this really matters any. + *khz = 1; + return ERROR_OK; +} + + +COMMAND_HANDLER(remote_bitbang_handle_remote_bitbang_port_command) +{ + if (CMD_ARGC == 1) { + COMMAND_PARSE_NUMBER(u16, CMD_ARGV[0], remote_bitbang_port); + return ERROR_OK; + } + return ERROR_COMMAND_SYNTAX_ERROR; +} + +COMMAND_HANDLER(remote_bitbang_handle_remote_bitbang_host_command) +{ + if (CMD_ARGC == 1) { + strncpy(remote_bitbang_host, CMD_ARGV[0], REMOTE_BITBANG_HOST_MAX); + remote_bitbang_host[REMOTE_BITBANG_HOST_MAX-1] = '\0'; + return ERROR_OK; + } + return ERROR_COMMAND_SYNTAX_ERROR; +} + + +static const struct command_registration remote_bitbang_command_handlers[] = { + { + .name = "remote_bitbang_port", + .handler = remote_bitbang_handle_remote_bitbang_port_command, + .mode = COMMAND_CONFIG, + .help = "Set the port to use to connect to the remote jtag.\n" + " if 0, use unix sockets to connect to the remote jtag.", + .usage = "port_number", + }, + { + .name = "remote_bitbang_host", + .handler = remote_bitbang_handle_remote_bitbang_host_command, + .mode = COMMAND_CONFIG, + .help = "Set the host to use to connect to the remote jtag.\n" + " if port is 0, this is the name of the unix socket to use.", + .usage = "host_name", + }, + COMMAND_REGISTRATION_DONE, +}; + +struct jtag_interface remote_bitbang_interface = { + .name = "remote_bitbang", + .execute_queue = &bitbang_execute_queue, + .speed = &remote_bitbang_speed, + .commands = remote_bitbang_command_handlers, + .init = &remote_bitbang_init, + .quit = &remote_bitbang_quit, + .khz = &remote_bitbang_khz, + .speed_div = &remote_bitbang_speed_div, +}; diff --git a/src/jtag/interfaces.c b/src/jtag/interfaces.c index dbc69d074a..76a4e8d103 100644 --- a/src/jtag/interfaces.c +++ b/src/jtag/interfaces.c @@ -97,6 +97,9 @@ extern struct jtag_interface armjtagew_interface; #if BUILD_BUSPIRATE == 1 extern struct jtag_interface buspirate_interface; #endif +#if BUILD_REMOTE_BITBANG == 1 +extern struct jtag_interface remote_bitbang_interface; +#endif #endif // standard drivers /** @@ -163,6 +166,9 @@ struct jtag_interface *jtag_interfaces[] = { #if BUILD_BUSPIRATE == 1 &buspirate_interface, #endif +#if BUILD_REMOTE_BITBANG == 1 + &remote_bitbang_interface, +#endif #endif // standard drivers NULL, };