From: Spencer Oliver Date: Thu, 27 Feb 2014 20:44:19 +0000 (+0000) Subject: cfg: change default SAM4L cortex_m reset_config X-Git-Tag: v0.8.0-rc1~41 X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=commitdiff_plain;h=0694bc652d68e66130b0322bbae38d49a19566b0 cfg: change default SAM4L cortex_m reset_config From testing this target does not seem to support using SYSRESETREQ, change the default to the safe VECTRESET. This target also has other reset issues (srst not working) that will be addressed in another patch. Change-Id: Icfc78347dc71aa3a062ddea63190a818d7fbc760 Signed-off-by: Spencer Oliver Reviewed-on: http://openocd.zylin.com/1995 Tested-by: jenkins Reviewed-by: Angus Gratton --- diff --git a/tcl/target/at91sam4lXX.cfg b/tcl/target/at91sam4lXX.cfg index 590d78f357..77ff98a8c9 100644 --- a/tcl/target/at91sam4lXX.cfg +++ b/tcl/target/at91sam4lXX.cfg @@ -6,3 +6,6 @@ source [find target/at91sam4XXX.cfg] set _FLASHNAME $_CHIPNAME.flash flash bank $_FLASHNAME at91sam4l 0x00000000 0 1 1 $_TARGETNAME +# if srst is not fitted use VECTRESET to perform a soft reset +# this will only reset the core, not the peripherals +cortex_m reset_config vectreset