--- /dev/null
+/***************************************************************************
+ * Copyright (C) 2018 by Simon Qian *
+ * SimonQian@SimonQian.com *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program. If not, see <http://www.gnu.org/licenses/>. *
+ ***************************************************************************/
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "imp.h"
+#include <helper/binarybuffer.h>
+#include <target/algorithm.h>
+#include <target/armv7m.h>
+
+#define W600_FLASH_SECSIZE 0x1000
+#define W600_FLASH_PAGESIZE 0x100
+#define W600_FLASH_BASE 0x08000000
+#define W600_FLASH_PROTECT_SIZE 0x2000
+
+/* w600 register locations */
+
+#define QFLASH_REGBASE 0X40002000
+#define QFLASH_CMD_INFO (QFLASH_REGBASE + 0)
+#define QFLASH_CMD_START (QFLASH_REGBASE + 4)
+#define QFLASH_BUFFER (QFLASH_REGBASE + 0X200)
+
+#define QFLASH_CMD_READ (1ul << 14)
+#define QFLASH_CMD_WRITE 0
+#define QFLASH_CMD_ADDR (1ul << 31)
+#define QFLASH_CMD_DATA (1ul << 15)
+#define QFLASH_CMD_DATALEN(len) (((len) & 0x3FF) << 16)
+
+#define QFLASH_CMD_RDID (QFLASH_CMD_READ | 0x9F)
+#define QFLASH_CMD_WREN (QFLASH_CMD_WRITE | 0x06)
+#define QFLASH_CMD_WRDI (QFLASH_CMD_WRITE | 0x04)
+#define QFLASH_CMD_SE (QFLASH_CMD_WRITE | QFLASH_CMD_ADDR | (1ul << 11) | 0x20)
+#define QFLASH_CMD_PP (QFLASH_CMD_WRITE | QFLASH_CMD_ADDR | (1ul << 12) | 0x02)
+
+#define QFLASH_START (1ul << 28)
+#define QFLASH_ADDR(addr) (((addr) & 0xFFFFF) << 8)
+#define QFLASH_CRM(crm) (((crm) & 0xFF) << 0)
+
+struct w600_flash_param {
+ uint8_t id;
+ uint8_t se_delay;
+ uint8_t pp_delay;
+};
+static const struct w600_flash_param w600_param[] = {
+ {
+ .id = 0x85,
+ .se_delay = 8,
+ .pp_delay = 2,
+ },
+ {
+ .id = 0x1C,
+ .se_delay = 50,
+ .pp_delay = 1,
+ },
+ {
+ .id = 0xC8,
+ .se_delay = 45,
+ .pp_delay = 1,
+ },
+ {
+ .id = 0x0B,
+ .se_delay = 60,
+ .pp_delay = 1,
+ },
+ {
+ .id = 0x68,
+ .se_delay = 50,
+ .pp_delay = 1,
+ },
+};
+
+struct w600_flash_bank {
+ int probed;
+
+ uint32_t id;
+ const struct w600_flash_param *param;
+ uint32_t register_base;
+ uint32_t user_bank_size;
+};
+
+/* flash bank w600 <base> <size> 0 0 <target#>
+ */
+FLASH_BANK_COMMAND_HANDLER(w600_flash_bank_command)
+{
+ struct w600_flash_bank *w600_info;
+
+ if (CMD_ARGC < 6)
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
+ w600_info = malloc(sizeof(struct w600_flash_bank));
+
+ bank->driver_priv = w600_info;
+ w600_info->probed = 0;
+ w600_info->register_base = QFLASH_REGBASE;
+ w600_info->user_bank_size = bank->size;
+
+ return ERROR_OK;
+}
+
+static int w600_get_delay(struct flash_bank *bank, uint32_t cmd)
+{
+ struct w600_flash_bank *w600_info = bank->driver_priv;
+
+ if (!w600_info->param)
+ return 0;
+
+ switch (cmd) {
+ case QFLASH_CMD_SE:
+ return w600_info->param->se_delay;
+ case QFLASH_CMD_PP:
+ return w600_info->param->pp_delay;
+ default:
+ return 0;
+ }
+}
+
+static int w600_start_do(struct flash_bank *bank, uint32_t cmd, uint32_t addr,
+ uint32_t len, int timeout)
+{
+ struct target *target = bank->target;
+
+ if (len > 0)
+ cmd |= QFLASH_CMD_DATALEN(len - 1) | QFLASH_CMD_DATA;
+
+ LOG_DEBUG("WRITE CMD: 0x%08" PRIx32 "", cmd);
+ int retval = target_write_u32(target, QFLASH_CMD_INFO, cmd);
+ if (retval != ERROR_OK)
+ return retval;
+
+ addr |= QFLASH_START;
+ LOG_DEBUG("WRITE START: 0x%08" PRIx32 "", addr);
+ retval = target_write_u32(target, QFLASH_CMD_START, addr);
+ if (retval != ERROR_OK)
+ return retval;
+
+ LOG_DEBUG("DELAY %dms", timeout);
+ alive_sleep(timeout);
+
+ int retry = 100;
+ uint32_t status;
+ for (;;) {
+ LOG_DEBUG("READ START...");
+ retval = target_read_u32(target, QFLASH_CMD_START, &status);
+ if (retval == ERROR_OK)
+ LOG_DEBUG("READ START: 0x%08" PRIx32 "", status);
+ else
+ LOG_DEBUG("READ START FAILED");
+
+ if ((retval != ERROR_OK) || (status & QFLASH_START)) {
+ if (retry-- <= 0) {
+ LOG_ERROR("timed out waiting for flash");
+ return ERROR_FAIL;
+ }
+ continue;
+ }
+ break;
+ }
+
+ return retval;
+}
+
+static int w600_write_enable(struct flash_bank *bank)
+{
+ return w600_start_do(bank, QFLASH_CMD_WREN, 0, 0, 0);
+}
+
+static int w600_write_disable(struct flash_bank *bank)
+{
+ return w600_start_do(bank, QFLASH_CMD_WRDI, 0, 0, 0);
+}
+
+static int w600_start(struct flash_bank *bank, uint32_t cmd, uint32_t addr,
+ uint32_t len)
+{
+ int retval = w600_write_enable(bank);
+ if (retval != ERROR_OK)
+ return retval;
+
+ retval = w600_start_do(bank, cmd, addr, len, w600_get_delay(bank, cmd));
+ if (retval != ERROR_OK)
+ return retval;
+
+ retval = w600_write_disable(bank);
+ if (retval != ERROR_OK)
+ return retval;
+
+ return retval;
+}
+
+static int w600_erase(struct flash_bank *bank, int first, int last)
+{
+ int retval = ERROR_OK;
+
+ if (bank->target->state != TARGET_HALTED) {
+ LOG_ERROR("Target not halted");
+ return ERROR_TARGET_NOT_HALTED;
+ }
+ if (first < W600_FLASH_PROTECT_SIZE / W600_FLASH_SECSIZE) {
+ LOG_ERROR("can not erase protected area");
+ return ERROR_FAIL;
+ }
+
+ for (int i = first; i <= last; i++) {
+ retval = w600_start(bank, QFLASH_CMD_SE,
+ QFLASH_ADDR(bank->sectors[i].offset), 0);
+ if (retval != ERROR_OK)
+ break;
+ }
+
+ return retval;
+}
+
+static int w600_write(struct flash_bank *bank, const uint8_t *buffer,
+ uint32_t offset, uint32_t count)
+{
+ struct target *target = bank->target;
+ int retval = ERROR_OK;
+
+ if (bank->target->state != TARGET_HALTED) {
+ LOG_ERROR("Target not halted");
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ if ((offset % W600_FLASH_PAGESIZE) != 0) {
+ LOG_WARNING("offset 0x%" PRIx32 " breaks required %" PRIu32 "-byte alignment",
+ offset, W600_FLASH_PAGESIZE);
+ return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
+ }
+
+ if ((count % W600_FLASH_PAGESIZE) != 0) {
+ LOG_WARNING("count 0x%" PRIx32 " breaks required %" PRIu32 "-byte alignment",
+ offset, W600_FLASH_PAGESIZE);
+ return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
+ }
+
+ while (count > 0) {
+ retval = target_write_buffer(target, QFLASH_BUFFER, W600_FLASH_PAGESIZE, buffer);
+ if (retval != ERROR_OK)
+ break;
+
+ retval = w600_start(bank, QFLASH_CMD_PP, QFLASH_ADDR(offset),
+ W600_FLASH_PAGESIZE);
+ if (retval != ERROR_OK)
+ break;
+
+ count -= W600_FLASH_PAGESIZE;
+ offset += W600_FLASH_PAGESIZE;
+ buffer += W600_FLASH_PAGESIZE;
+ }
+
+ return retval;
+}
+
+static int w600_get_flash_id(struct flash_bank *bank, uint32_t *flash_id)
+{
+ struct target *target = bank->target;
+
+ int retval = w600_start(bank, QFLASH_CMD_RDID, 0, 4);
+ if (retval != ERROR_OK)
+ return retval;
+
+ return target_read_u32(target, QFLASH_BUFFER, flash_id);
+}
+
+static int w600_probe(struct flash_bank *bank)
+{
+ struct w600_flash_bank *w600_info = bank->driver_priv;
+ uint32_t flash_size;
+ uint32_t flash_id;
+ size_t i;
+
+ w600_info->probed = 0;
+
+ /* read stm32 device id register */
+ int retval = w600_get_flash_id(bank, &flash_id);
+ if (retval != ERROR_OK)
+ return retval;
+
+ LOG_INFO("flash_id id = 0x%08" PRIx32 "", flash_id);
+ w600_info->id = flash_id;
+ w600_info->param = NULL;
+ for (i = 0; i < ARRAY_SIZE(w600_param); i++) {
+ if (w600_param[i].id == (flash_id & 0xFF)) {
+ w600_info->param = &w600_param[i];
+ break;
+ }
+ }
+ if (!w600_info->param) {
+ LOG_ERROR("flash_id not supported for w600");
+ return ERROR_FAIL;
+ }
+
+ /* if the user sets the size manually then ignore the probed value
+ * this allows us to work around devices that have a invalid flash size register value */
+ if (w600_info->user_bank_size) {
+ LOG_INFO("ignoring flash probed value, using configured bank size");
+ flash_size = w600_info->user_bank_size;
+ } else {
+ flash_size = ((flash_id & 0xFFFFFF) >> 16) & 0xFF;
+ if ((flash_size != 0x14) && (flash_size != 0x13)) {
+ LOG_ERROR("w600 flash size failed, probe inaccurate");
+ return ERROR_FAIL;
+ }
+
+ flash_size = 1 << flash_size;
+ }
+
+ LOG_INFO("flash size = %dkbytes", flash_size / 1024);
+
+ /* calculate numbers of pages */
+ size_t num_pages = flash_size / W600_FLASH_SECSIZE;
+
+ /* check that calculation result makes sense */
+ assert(num_pages > 0);
+
+ if (bank->sectors) {
+ free(bank->sectors);
+ bank->sectors = NULL;
+ }
+
+ bank->base = W600_FLASH_BASE;
+ bank->size = num_pages * W600_FLASH_SECSIZE;
+ bank->num_sectors = num_pages;
+ bank->write_start_alignment = W600_FLASH_PAGESIZE;
+ bank->write_end_alignment = W600_FLASH_PAGESIZE;
+ bank->sectors = malloc(sizeof(struct flash_sector) * num_pages);
+
+ for (i = 0; i < num_pages; i++) {
+ bank->sectors[i].offset = i * W600_FLASH_SECSIZE;
+ bank->sectors[i].size = W600_FLASH_SECSIZE;
+ bank->sectors[i].is_erased = -1;
+ /* offset 0 to W600_FLASH_PROTECT_SIZE shoule be protected */
+ bank->sectors[i].is_protected = (i < W600_FLASH_PROTECT_SIZE / W600_FLASH_SECSIZE);
+ }
+
+ w600_info->probed = 1;
+
+ return ERROR_OK;
+}
+
+static int w600_auto_probe(struct flash_bank *bank)
+{
+ struct w600_flash_bank *w600_info = bank->driver_priv;
+ if (w600_info->probed)
+ return ERROR_OK;
+ return w600_probe(bank);
+}
+
+static int get_w600_info(struct flash_bank *bank, char *buf, int buf_size)
+{
+ uint32_t flash_id;
+
+ /* read w600 device id register */
+ int retval = w600_get_flash_id(bank, &flash_id);
+ if (retval != ERROR_OK)
+ return retval;
+
+ snprintf(buf, buf_size, "w600 : 0x%08" PRIx32 "", flash_id);
+ return ERROR_OK;
+}
+
+struct flash_driver w600_flash = {
+ .name = "w600",
+ .flash_bank_command = w600_flash_bank_command,
+ .erase = w600_erase,
+ .write = w600_write,
+ .read = default_flash_read,
+ .probe = w600_probe,
+ .auto_probe = w600_auto_probe,
+ .erase_check = default_flash_blank_check,
+ .info = get_w600_info,
+ .free_driver_priv = default_flash_free_driver_priv,
+};
Code Review / openocd.git / commitdiff