Introduce a new ERROR_TARGET_ALGO_EXIT as currently used
ERROR_TARGET_TIMEOUT should be reserved for the timeout only.
Do not load PC directly from CPU HW as the register value
has already been cached.
Change-Id: I0d3630da41fd021676789dc12b52545cc0432ba8
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/5329
Tested-by: jenkins
Reviewed-by: Christopher Head <chead@zaber.com>
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
struct armv7m_common *armv7m = target_to_armv7m(target);
struct armv7m_algorithm *armv7m_algorithm_info = arch_info;
int retval = ERROR_OK;
struct armv7m_common *armv7m = target_to_armv7m(target);
struct armv7m_algorithm *armv7m_algorithm_info = arch_info;
int retval = ERROR_OK;
/* NOTE: armv7m_run_algorithm requires that each algorithm uses a software breakpoint
* at the exit point */
/* NOTE: armv7m_run_algorithm requires that each algorithm uses a software breakpoint
* at the exit point */
return ERROR_TARGET_TIMEOUT;
}
return ERROR_TARGET_TIMEOUT;
}
- armv7m->load_core_reg_u32(target, 15, &pc);
- if (exit_point && (pc != exit_point)) {
- LOG_DEBUG("failed algorithm halted at 0x%" PRIx32 ", expected 0x%" TARGET_PRIxADDR,
- pc,
- exit_point);
- return ERROR_TARGET_TIMEOUT;
+ if (exit_point) {
+ /* PC value has been cached in cortex_m_debug_entry() */
+ uint32_t pc = buf_get_u32(armv7m->arm.pc->value, 0, 32);
+ if (pc != exit_point) {
+ LOG_DEBUG("failed algorithm halted at 0x%" PRIx32 ", expected 0x%" TARGET_PRIxADDR,
+ pc, exit_point);
+ return ERROR_TARGET_ALGO_EXIT;
+ }
}
/* Read memory values to mem_params[] */
}
/* Read memory values to mem_params[] */
#define ERROR_TARGET_NOT_RUNNING (-310)
#define ERROR_TARGET_NOT_EXAMINED (-311)
#define ERROR_TARGET_DUPLICATE_BREAKPOINT (-312)
#define ERROR_TARGET_NOT_RUNNING (-310)
#define ERROR_TARGET_NOT_EXAMINED (-311)
#define ERROR_TARGET_DUPLICATE_BREAKPOINT (-312)
+#define ERROR_TARGET_ALGO_EXIT (-313)
extern bool get_target_reset_nag(void);
extern bool get_target_reset_nag(void);
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)