Cortex-A8: basic watchpoint support
authorDavid Brownell <dbrownell@users.sourceforge.net>
Wed, 2 Dec 2009 05:47:45 +0000 (21:47 -0800)
committerDavid Brownell <dbrownell@users.sourceforge.net>
Wed, 2 Dec 2009 05:47:45 +0000 (21:47 -0800)
Actually this should handle both breakpoints and watchpoints ... but
the DPM framework only handles watchpoints for now.  Works on Beagle.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
src/target/cortex_a8.c

index 81402d79d422c62d91b5db484127f71f1dde34b7..a289d96a6e492a4717b37551dcc912951b4d934d 100644 (file)
@@ -460,6 +460,66 @@ static int cortex_a8_instr_read_data_r0(struct arm_dpm *dpm,
        return cortex_a8_read_dcc(a8, data, &dscr);
 }
 
+static int cortex_a8_bpwp_enable(struct arm_dpm *dpm, unsigned index,
+               uint32_t addr, uint32_t control)
+{
+       struct cortex_a8_common *a8 = dpm_to_a8(dpm);
+       uint32_t vr = a8->armv7a_common.debug_base;
+       uint32_t cr = a8->armv7a_common.debug_base;
+       int retval;
+
+       switch (index) {
+       case 0 ... 15:          /* breakpoints */
+               vr += CPUDBG_BVR_BASE;
+               cr += CPUDBG_BCR_BASE;
+               break;
+       case 16 ... 31:         /* watchpoints */
+               vr += CPUDBG_WVR_BASE;
+               cr += CPUDBG_WCR_BASE;
+               index -= 16;
+               break;
+       default:
+               return ERROR_FAIL;
+       }
+       vr += 4 * index;
+       cr += 4 * index;
+
+       LOG_DEBUG("A8: bpwp enable, vr %08x cr %08x",
+                       (unsigned) vr, (unsigned) cr);
+
+       retval = cortex_a8_dap_write_memap_register_u32(dpm->arm->target,
+                       vr, addr);
+       if (retval != ERROR_OK)
+               return retval;
+       retval = cortex_a8_dap_write_memap_register_u32(dpm->arm->target,
+                       cr, control);
+       return retval;
+}
+
+static int cortex_a8_bpwp_disable(struct arm_dpm *dpm, unsigned index)
+{
+       struct cortex_a8_common *a8 = dpm_to_a8(dpm);
+       uint32_t cr;
+
+       switch (index) {
+       case 0 ... 15:
+               cr = a8->armv7a_common.debug_base + CPUDBG_BCR_BASE;
+               break;
+       case 16 ... 31:
+               cr = a8->armv7a_common.debug_base + CPUDBG_WCR_BASE;
+               index -= 16;
+               break;
+       default:
+               return ERROR_FAIL;
+       }
+       cr += 4 * index;
+
+       LOG_DEBUG("A8: bpwp disable, cr %08x", (unsigned) cr);
+
+       /* clear control register */
+       return cortex_a8_dap_write_memap_register_u32(dpm->arm->target, cr, 0);
+}
+
 static int cortex_a8_dpm_setup(struct cortex_a8_common *a8, uint32_t didr)
 {
        struct arm_dpm *dpm = &a8->armv7a_common.dpm;
@@ -477,6 +537,9 @@ static int cortex_a8_dpm_setup(struct cortex_a8_common *a8, uint32_t didr)
        dpm->instr_read_data_dcc = cortex_a8_instr_read_data_dcc;
        dpm->instr_read_data_r0 = cortex_a8_instr_read_data_r0;
 
+       dpm->bpwp_enable = cortex_a8_bpwp_enable;
+       dpm->bpwp_disable = cortex_a8_bpwp_disable;
+
        return arm_dpm_setup(dpm);
 }
 
@@ -745,6 +808,7 @@ static int cortex_a8_debug_entry(struct target *target)
                case 5:         /* vector catch */
                        target->debug_reason = DBG_REASON_BREAKPOINT;
                        break;
+               case 2:         /* asynch watchpoint */
                case 10:        /* precise watchpoint */
                        target->debug_reason = DBG_REASON_WATCHPOINT;
                        /* REVISIT could collect WFAR later, to see just
@@ -1276,6 +1340,8 @@ static int cortex_a8_write_memory(struct target *target, uint32_t address,
                 *
                 * For both ICache and DCache, walk all cache lines in the
                 * address range. Cortex-A8 has fixed 64 byte line length.
+                *
+                * REVISIT per ARMv7, these may trigger watchpoints ...
                 */
 
                /* invalidate I-Cache */

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)