mips: load code in buffer mode 62/1562/6
authorSalvador Arroyo <sarroyofdez@yahoo.es>
Fri, 23 Aug 2013 16:50:43 +0000 (18:50 +0200)
committerFreddie Chopin <freddie.chopin@gmail.com>
Fri, 9 May 2014 20:37:42 +0000 (20:37 +0000)
Currently the functions mips32_checksum_memory() and mips32_blank_check_memory()
load the code word by word.
The bug in cache code is a good reason for doing so.
If there is no other reason we can load the code as a buffer to save time.
mips_m4k_write_memory() expect a buffer in target endianness, this is done by
target_buffer_set_u32_array().
Cleaned up exit code.
Tested on ar7241 big endian and pic32mx little endian with verify_image.
Flash erase check only tested in pic32mx.

Change-Id: Ib63ed98732b2e23b058e7349a0a57934b7604905
Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es>
Reviewed-on: http://openocd.zylin.com/1562
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
src/target/mips32.c

index 7cf5477dcaefeea15141e8374919e71569987120..b05a56312721ff3df57d8186fe5eca3c37fd8402 100644 (file)
@@ -606,10 +606,8 @@ int mips32_checksum_memory(struct target *target, uint32_t address,
        struct working_area *crc_algorithm;
        struct reg_param reg_params[2];
        struct mips32_algorithm mips32_info;
-       int retval;
-       uint32_t i;
 
-       /* see contib/loaders/checksum/mips32.s for src */
+       /* see contrib/loaders/checksum/mips32.s for src */
 
        static const uint32_t mips_crc_code[] = {
                0x248C0000,             /* addiu        $t4, $a0, 0 */
@@ -644,9 +642,12 @@ int mips32_checksum_memory(struct target *target, uint32_t address,
        if (target_alloc_working_area(target, sizeof(mips_crc_code), &crc_algorithm) != ERROR_OK)
                return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
 
-       /* convert flash writing code into a buffer in target endianness */
-       for (i = 0; i < ARRAY_SIZE(mips_crc_code); i++)
-               target_write_u32(target, crc_algorithm->address + i*sizeof(uint32_t), mips_crc_code[i]);
+       /* convert mips crc code into a buffer in target endianness */
+       uint8_t mips_crc_code_8[sizeof(mips_crc_code)];
+       target_buffer_set_u32_array(target, mips_crc_code_8,
+                                       ARRAY_SIZE(mips_crc_code), mips_crc_code);
+
+       target_write_buffer(target, crc_algorithm->address, sizeof(mips_crc_code), mips_crc_code_8);
 
        mips32_info.common_magic = MIPS32_COMMON_MAGIC;
        mips32_info.isa_mode = MIPS32_ISA_MIPS32;
@@ -659,24 +660,19 @@ int mips32_checksum_memory(struct target *target, uint32_t address,
 
        int timeout = 20000 * (1 + (count / (1024 * 1024)));
 
-       retval = target_run_algorithm(target, 0, NULL, 2, reg_params,
-                       crc_algorithm->address, crc_algorithm->address + (sizeof(mips_crc_code)-4), timeout,
+       int retval = target_run_algorithm(target, 0, NULL, 2, reg_params,
+                       crc_algorithm->address, crc_algorithm->address + (sizeof(mips_crc_code) - 4), timeout,
                        &mips32_info);
-       if (retval != ERROR_OK) {
-               destroy_reg_param(&reg_params[0]);
-               destroy_reg_param(&reg_params[1]);
-               target_free_working_area(target, crc_algorithm);
-               return retval;
-       }
 
-       *checksum = buf_get_u32(reg_params[0].value, 0, 32);
+       if (retval == ERROR_OK)
+               *checksum = buf_get_u32(reg_params[0].value, 0, 32);
 
        destroy_reg_param(&reg_params[0]);
        destroy_reg_param(&reg_params[1]);
 
        target_free_working_area(target, crc_algorithm);
 
-       return ERROR_OK;
+       return retval;
 }
 
 /** Checks whether a memory region is zeroed. */
@@ -686,8 +682,6 @@ int mips32_blank_check_memory(struct target *target,
        struct working_area *erase_check_algorithm;
        struct reg_param reg_params[3];
        struct mips32_algorithm mips32_info;
-       int retval;
-       uint32_t i;
 
        static const uint32_t erase_check_code[] = {
                                                /* nbyte: */
@@ -703,11 +697,12 @@ int mips32_blank_check_memory(struct target *target,
        if (target_alloc_working_area(target, sizeof(erase_check_code), &erase_check_algorithm) != ERROR_OK)
                return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
 
-       /* convert flash writing code into a buffer in target endianness */
-       for (i = 0; i < ARRAY_SIZE(erase_check_code); i++) {
-               target_write_u32(target, erase_check_algorithm->address + i*sizeof(uint32_t),
-                               erase_check_code[i]);
-       }
+       /* convert erase check code into a buffer in target endianness */
+       uint8_t erase_check_code_8[sizeof(erase_check_code)];
+       target_buffer_set_u32_array(target, erase_check_code_8,
+                                       ARRAY_SIZE(erase_check_code), erase_check_code);
+
+       target_write_buffer(target, erase_check_algorithm->address, sizeof(erase_check_code), erase_check_code_8);
 
        mips32_info.common_magic = MIPS32_COMMON_MAGIC;
        mips32_info.isa_mode = MIPS32_ISA_MIPS32;
@@ -721,19 +716,13 @@ int mips32_blank_check_memory(struct target *target,
        init_reg_param(&reg_params[2], "a2", 32, PARAM_IN_OUT);
        buf_set_u32(reg_params[2].value, 0, 32, 0xff);
 
-       retval = target_run_algorithm(target, 0, NULL, 3, reg_params,
+       int retval = target_run_algorithm(target, 0, NULL, 3, reg_params,
                        erase_check_algorithm->address,
-                       erase_check_algorithm->address + (sizeof(erase_check_code)-4),
+                       erase_check_algorithm->address + (sizeof(erase_check_code) - 4),
                        10000, &mips32_info);
-       if (retval != ERROR_OK) {
-               destroy_reg_param(&reg_params[0]);
-               destroy_reg_param(&reg_params[1]);
-               destroy_reg_param(&reg_params[2]);
-               target_free_working_area(target, erase_check_algorithm);
-               return retval;
-       }
 
-       *blank = buf_get_u32(reg_params[2].value, 0, 32);
+       if (retval == ERROR_OK)
+               *blank = buf_get_u32(reg_params[2].value, 0, 32);
 
        destroy_reg_param(&reg_params[0]);
        destroy_reg_param(&reg_params[1]);
@@ -741,7 +730,7 @@ int mips32_blank_check_memory(struct target *target,
 
        target_free_working_area(target, erase_check_algorithm);
 
-       return ERROR_OK;
+       return retval;
 }
 
 static int mips32_verify_pointer(struct command_context *cmd_ctx,

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)