The coding style is quite permissive allowing 120 chars per line,
but abuses are still present.
Fix them, wrapping the lines.
Change-Id: I94d66b651d759a60ec35f7ba115c43933e70ed69
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5626
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
}
/** single word instruction */
}
/** single word instruction */
-static inline int dsp563xx_once_ir_exec(struct jtag_tap *tap, int flush, uint8_t instr, uint8_t rw, uint8_t go, uint8_t ex)
+static inline int dsp563xx_once_ir_exec(struct jtag_tap *tap, int flush, uint8_t instr,
+ uint8_t rw, uint8_t go, uint8_t ex)
- * Prior to the execution of any Flash module command, the Flash module Clock Divider (CLKDIV) register must be initialized. The values of this register determine the speed of the internal Flash Clock (FCLK). FCLK must be in the range of 150kHz ≤ FCLK ≤ 200kHz for proper operation of the Flash module. (Running FCLK too slowly wears out the module, while running it too fast under programs Flash leading to bit errors.)
+ * Prior to the execution of any Flash module command, the Flash module Clock
+ * Divider (CLKDIV) register must be initialized. The values of this register
+ * determine the speed of the internal Flash Clock (FCLK). FCLK must be in the
+ * range of 150kHz ≤ FCLK ≤ 200kHz for proper operation of the Flash module.
+ * (Running FCLK too slowly wears out the module, while running it too fast
+ * under programs Flash leading to bit errors.)
- * Executes the FM calculate signature command. The FM will calculate over the data from @address to @address + @words -1. The result is written to a register, then read out by this function and returned in @signature. The value @signature may be compared to the the one returned by perl_crc to verify the flash was written correctly.
+ * Executes the FM calculate signature command. The FM will calculate over the
+ * data from @address to @address + @words -1. The result is written to a
+ * register, then read out by this function and returned in @signature. The
+ * value @signature may be compared to the the one returned by perl_crc to
+ * verify the flash was written correctly.
*
* @param target
* @param address Start of flash array where the signature should be calculated.
*
* @param target
* @param address Start of flash array where the signature should be calculated.
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)