missing target types are arm946e, avr32_ap7k, cortex_r4, dsp5680xx,
hla_target, mips_mips64, nds32_v2, nds32_v3, nds32_v3m, quark_d20xx,
quark_x10xx, riscv, stm8 and testee
Change-Id: I38f6ed78ee88c09add4b779cd409ebb1e219304f
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: http://openocd.zylin.com/5487
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Reviewed-by: Tim Newsome <tim@casualhacker.net>
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
At this writing, the supported CPU types are:
@itemize @bullet
At this writing, the supported CPU types are:
@itemize @bullet
-@item @code{aarch64} -- this is an ARMv8-A core with an MMU
-@item @code{arm11} -- this is a generation of ARMv6 cores
-@item @code{arm720t} -- this is an ARMv4 core with an MMU
-@item @code{arm7tdmi} -- this is an ARMv4 core
-@item @code{arm920t} -- this is an ARMv4 core with an MMU
-@item @code{arm926ejs} -- this is an ARMv5 core with an MMU
-@item @code{arm966e} -- this is an ARMv5 core
-@item @code{arm9tdmi} -- this is an ARMv4 core
+@item @code{aarch64} -- this is an ARMv8-A core with an MMU.
+@item @code{arm11} -- this is a generation of ARMv6 cores.
+@item @code{arm720t} -- this is an ARMv4 core with an MMU.
+@item @code{arm7tdmi} -- this is an ARMv4 core.
+@item @code{arm920t} -- this is an ARMv4 core with an MMU.
+@item @code{arm926ejs} -- this is an ARMv5 core with an MMU.
+@item @code{arm946e} -- this is an ARMv5 core with an MMU.
+@item @code{arm966e} -- this is an ARMv5 core.
+@item @code{arm9tdmi} -- this is an ARMv4 core.
@item @code{avr} -- implements Atmel's 8-bit AVR instruction set.
(Support for this is preliminary and incomplete.)
@item @code{avr} -- implements Atmel's 8-bit AVR instruction set.
(Support for this is preliminary and incomplete.)
-@item @code{cortex_a} -- this is an ARMv7-A core with an MMU
+@item @code{avr32_ap7k} -- this an AVR32 core.
+@item @code{cortex_a} -- this is an ARMv7-A core with an MMU.
@item @code{cortex_m} -- this is an ARMv7-M core, supporting only the
compact Thumb2 instruction set. Supports also ARMv6-M and ARMv8-M cores
@item @code{cortex_m} -- this is an ARMv7-M core, supporting only the
compact Thumb2 instruction set. Supports also ARMv6-M and ARMv8-M cores
-@item @code{dragonite} -- resembles arm966e
+@item @code{cortex_r4} -- this is an ARMv7-R core.
+@item @code{dragonite} -- resembles arm966e.
@item @code{dsp563xx} -- implements Freescale's 24-bit DSP.
(Support for this is still incomplete.)
@item @code{dsp563xx} -- implements Freescale's 24-bit DSP.
(Support for this is still incomplete.)
+@item @code{dsp5680xx} -- implements Freescale's 5680x DSP.
@item @code{esirisc} -- this is an EnSilica eSi-RISC core.
The current implementation supports eSi-32xx cores.
@item @code{esirisc} -- this is an EnSilica eSi-RISC core.
The current implementation supports eSi-32xx cores.
-@item @code{fa526} -- resembles arm920 (w/o Thumb)
-@item @code{feroceon} -- resembles arm926
+@item @code{fa526} -- resembles arm920 (w/o Thumb).
+@item @code{feroceon} -- resembles arm926.
+@item @code{hla_target} -- a Cortex-M alternative to work with HL adapters like ST-Link.
@item @code{ls1_sap} -- this is the SAP on NXP LS102x CPUs,
allowing access to physical memory addresses independently of CPU cores.
@item @code{mem_ap} -- this is an ARM debug infrastructure Access Port without a CPU, through which bus read and write cycles can be generated; it may be useful for working with non-CPU hardware behind an AP or during development of support for new CPUs.
@item @code{ls1_sap} -- this is the SAP on NXP LS102x CPUs,
allowing access to physical memory addresses independently of CPU cores.
@item @code{mem_ap} -- this is an ARM debug infrastructure Access Port without a CPU, through which bus read and write cycles can be generated; it may be useful for working with non-CPU hardware behind an AP or during development of support for new CPUs.
-@item @code{mips_m4k} -- a MIPS core
+@item @code{mips_m4k} -- a MIPS core.
+@item @code{mips_mips64} -- a MIPS64 core.
+@item @code{nds32_v2} -- this is an Andes NDS32 v2 core.
+@item @code{nds32_v3} -- this is an Andes NDS32 v3 core.
+@item @code{nds32_v3m} -- this is an Andes NDS32 v3m core.
@item @code{or1k} -- this is an OpenRISC 1000 core.
The current implementation supports three JTAG TAP cores:
@itemize @minus
@item @code{or1k} -- this is an OpenRISC 1000 core.
The current implementation supports three JTAG TAP cores:
@itemize @minus
@item @code{Advanced debug interface} (See: @url{http://opencores.org/project@comma{}adv_debug_sys})
@item @code{SoC Debug Interface} (See: @url{http://opencores.org/project@comma{}dbg_interface})
@end itemize
@item @code{Advanced debug interface} (See: @url{http://opencores.org/project@comma{}adv_debug_sys})
@item @code{SoC Debug Interface} (See: @url{http://opencores.org/project@comma{}dbg_interface})
@end itemize
+@item @code{quark_d20xx} -- an Intel Quark D20xx core.
+@item @code{quark_x10xx} -- an Intel Quark X10xx core.
+@item @code{riscv} -- a RISC-V core.
+@item @code{stm8} -- implements an STM8 core.
+@item @code{testee} -- a dummy target for cases without a real CPU, e.g. CPLD.
@item @code{xscale} -- this is actually an architecture,
not a CPU type. It is based on the ARMv5 architecture.
@end itemize
@item @code{xscale} -- this is actually an architecture,
not a CPU type. It is based on the ARMv5 architecture.
@end itemize
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)