arm_adi_v5: Rewrite MEM-AP transfer implementation

Create a single pair of relatively simple functions to handle all variants
of MEM-AP transfers. This replaces the many separate functions that
handled different access sizes and packed or non-packed transfers, which
were all implemented rather differently.

With this single implementation, performance should be more consistent,
regardless of transfer type.

Change-Id: I89960e437fc6ba68a389c074fab8eac91abcf844
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/1658
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

diff --git a/src/target/arm_adi_v5.c b/src/target/arm_adi_v5.c
index 67fb23b2ec5dea39e3508fd9924a5a1c3cf85091..68af7f34ddfcf6cecf7617a1819886854a4c7969 100644 (file)
--- a/src/target/arm_adi_v5.c
+++ b/src/target/arm_adi_v5.c
@@ -10,6 +10,9 @@
  *                                                                         *
  *   Copyright (C) 2009-2010 by David Brownell                             *
  *                                                                         *
  *                                                                         *
  *   Copyright (C) 2009-2010 by David Brownell                             *
  *                                                                         *

+ *   Copyright (C) 2013 by Andreas Fritiofson                              *
+ *   andreas.fritiofson@gmail.com                                          *
+ *                                                                         *

  *   This program is free software; you can redistribute it and/or modify  *
  *   it under the terms of the GNU General Public License as published by  *
  *   the Free Software Foundation; either version 2 of the License, or     *
  *   This program is free software; you can redistribute it and/or modify  *
  *   it under the terms of the GNU General Public License as published by  *
  *   the Free Software Foundation; either version 2 of the License, or     *


@@ -115,6 +118,33 @@ void dap_ap_select(struct adiv5_dap *dap, uint8_t ap)
        }
 }
 
        }
 }
 

+static int dap_setup_accessport_csw(struct adiv5_dap *dap, uint32_t csw)
+{
+       csw = csw | CSW_DBGSWENABLE | CSW_MASTER_DEBUG | CSW_HPROT |
+               dap->apcsw[dap->ap_current >> 24];
+
+       if (csw != dap->ap_csw_value) {
+               /* LOG_DEBUG("DAP: Set CSW %x",csw); */
+               int retval = dap_queue_ap_write(dap, AP_REG_CSW, csw);
+               if (retval != ERROR_OK)
+                       return retval;
+               dap->ap_csw_value = csw;
+       }
+       return ERROR_OK;
+}
+
+static int dap_setup_accessport_tar(struct adiv5_dap *dap, uint32_t tar)
+{
+       if (tar != dap->ap_tar_value || dap->ap_csw_value & CSW_ADDRINC_MASK) {
+               /* LOG_DEBUG("DAP: Set TAR %x",tar); */
+               int retval = dap_queue_ap_write(dap, AP_REG_TAR, tar);
+               if (retval != ERROR_OK)
+                       return retval;
+               dap->ap_tar_value = tar;
+       }
+       return ERROR_OK;
+}
+

 /**
  * Queue transactions setting up transfer parameters for the
  * currently selected MEM-AP.
 /**
  * Queue transactions setting up transfer parameters for the
  * currently selected MEM-AP.


@@ -137,26 +167,12 @@ void dap_ap_select(struct adiv5_dap *dap, uint8_t ap)
 int dap_setup_accessport(struct adiv5_dap *dap, uint32_t csw, uint32_t tar)
 {
        int retval;
 int dap_setup_accessport(struct adiv5_dap *dap, uint32_t csw, uint32_t tar)
 {
        int retval;

-       csw = csw | CSW_DBGSWENABLE | CSW_MASTER_DEBUG | CSW_HPROT |
-               dap->apcsw[dap->ap_current >> 24];
-
-       if (csw != dap->ap_csw_value) {
-               /* LOG_DEBUG("DAP: Set CSW %x",csw); */
-               retval = dap_queue_ap_write(dap, AP_REG_CSW, csw);
-               if (retval != ERROR_OK)
-                       return retval;
-               dap->ap_csw_value = csw;
-       }
-       if (tar != dap->ap_tar_value) {
-               /* LOG_DEBUG("DAP: Set TAR %x",tar); */
-               retval = dap_queue_ap_write(dap, AP_REG_TAR, tar);
-               if (retval != ERROR_OK)
-                       return retval;
-               dap->ap_tar_value = tar;
-       }
-       /* Disable TAR cache when autoincrementing */
-       if (csw & CSW_ADDRINC_MASK)
-               dap->ap_tar_value = -1;
+       retval = dap_setup_accessport_csw(dap, csw);
+       if (retval != ERROR_OK)
+               return retval;
+       retval = dap_setup_accessport_tar(dap, tar);
+       if (retval != ERROR_OK)
+               return retval;

        return ERROR_OK;
 }
 
        return ERROR_OK;
 }
 


@@ -261,521 +277,257 @@ int mem_ap_write_atomic_u32(struct adiv5_dap *dap, uint32_t address,
        return dap_run(dap);
 }
 
        return dap_run(dap);
 }
 

-int mem_ap_write_buf_u32(struct adiv5_dap *dap, const uint8_t *buffer, int count, uint32_t address, bool addr_incr)
+/**
+ * Synchronous write of a block of memory, using a specific access size.
+ *
+ * @param dap The DAP connected to the MEM-AP.
+ * @param buffer The data buffer to write. No particular alignment is assumed.
+ * @param size Which access size to use, in bytes. 1, 2 or 4.
+ * @param count The number of writes to do (in size units, not bytes).
+ * @param address Address to be written; it must be writable by the currently selected MEM-AP.
+ * @param addrinc Whether the target address should be increased for each write or not. This
+ *  should normally be true, except when writing to e.g. a FIFO.
+ * @return ERROR_OK on success, otherwise an error code.
+ */
+int mem_ap_write(struct adiv5_dap *dap, const uint8_t *buffer, uint32_t size, uint32_t count,
+               uint32_t address, bool addrinc)

 {
 {

-       int wcount, blocksize, writecount, errorcount = 0, retval = ERROR_OK;
-       uint32_t adr = address;
-       uint32_t incr_flag = addr_incr ? CSW_ADDRINC_SINGLE : CSW_ADDRINC_OFF;
-
-       wcount = count >> 2;
-
-       while (wcount > 0) {
-               /* Adjust to write blocks within boundaries aligned to the TAR auto-increment size */
-               blocksize = max_tar_block_size(dap->tar_autoincr_block, address) / 4;
-               if (wcount < blocksize)
-                       blocksize = wcount;
-
-               /* handle unaligned data at 4k boundary */
-               if (blocksize == 0)
-                       blocksize = 1;
+       size_t nbytes = size * count;
+       const uint32_t csw_addrincr = addrinc ? CSW_ADDRINC_SINGLE : CSW_ADDRINC_OFF;
+       uint32_t csw_size;
+       int retval;

 
 

-               retval = dap_setup_accessport(dap, CSW_32BIT | incr_flag, address);
-               if (retval != ERROR_OK)
-                       return retval;
+       if (size == 4)
+               csw_size = CSW_32BIT;
+       else if (size == 2)
+               csw_size = CSW_16BIT;
+       else if (size == 1)
+               csw_size = CSW_8BIT;
+       else
+               return ERROR_TARGET_UNALIGNED_ACCESS;

 
 

-               for (writecount = 0; writecount < blocksize; writecount++) {
-                       uint32_t outvalue = 0;
-                       outvalue |= (uint32_t)*buffer++ << 8 * (adr++ & 3);
-                       outvalue |= (uint32_t)*buffer++ << 8 * (adr++ & 3);
-                       outvalue |= (uint32_t)*buffer++ << 8 * (adr++ & 3);
-                       outvalue |= (uint32_t)*buffer++ << 8 * (adr++ & 3);
+       retval = dap_setup_accessport_tar(dap, address);
+       if (retval != ERROR_OK)
+               return retval;

 
 

-                       retval = dap_queue_ap_write(dap, AP_REG_DRW, outvalue);
-                       if (retval != ERROR_OK)
-                               break;
-               }
+       while (nbytes > 0) {
+               uint32_t this_size = size;

 
 

-               retval = dap_run(dap);
-               if (retval == ERROR_OK) {
-                       wcount -= blocksize;
-                       if (addr_incr)
-                               address += 4 * blocksize;
-               } else
-                       errorcount++;
-
-               if (errorcount > 1) {
-                       LOG_WARNING("Block write error address 0x%" PRIx32 ", wcount 0x%x", address, wcount);
-                       return retval;
+               /* Select packed transfer if possible */
+               if (addrinc && dap->packed_transfers && nbytes >= 4
+                               && max_tar_block_size(dap->tar_autoincr_block, address) >= 4) {
+                       this_size = 4;
+                       retval = dap_setup_accessport_csw(dap, csw_size | CSW_ADDRINC_PACKED);
+               } else {
+                       retval = dap_setup_accessport_csw(dap, csw_size | csw_addrincr);

                }
                }

-       }
-
-       return retval;
-}

 
 

-static int mem_ap_write_buf_packed_u16(struct adiv5_dap *dap,
-               const uint8_t *buffer, int count, uint32_t address)
-{
-       int retval = ERROR_OK;
-       int wcount, blocksize, writecount;
-
-       wcount = count >> 1;
-
-       while (wcount > 0) {
-               int nbytes;
-
-               /* Adjust to write blocks within boundaries aligned to the TAR auto-increment size */
-               blocksize = max_tar_block_size(dap->tar_autoincr_block, address) / 2;
-
-               if (wcount < blocksize)
-                       blocksize = wcount;
-
-               /* handle unaligned data at 4k boundary */
-               if (blocksize == 0)
-                       blocksize = 1;
-
-               retval = dap_setup_accessport(dap, CSW_16BIT | CSW_ADDRINC_PACKED, address);
-               if (retval != ERROR_OK)
-                       return retval;
-               writecount = blocksize;
-
-               do {
-                       nbytes = MIN((writecount << 1), 4);
-
-                       if (nbytes < 4) {
-                               retval = mem_ap_write_buf_u16(dap, buffer,
-                                               nbytes, address);
-                               if (retval != ERROR_OK) {
-                                       LOG_WARNING("Block write error address "
-                                               "0x%" PRIx32 ", count 0x%x",
-                                               address, count);
-                                       return retval;
-                               }
-
-                               address += nbytes;
-                               buffer += nbytes;
-                       } else {
-                               assert(nbytes == 4);
-
-                               uint32_t outvalue = 0;
-                               outvalue |= (uint32_t)*buffer++ << 8 * (address++ & 3);
-                               outvalue |= (uint32_t)*buffer++ << 8 * (address++ & 3);
-                               outvalue |= (uint32_t)*buffer++ << 8 * (address++ & 3);
-                               outvalue |= (uint32_t)*buffer++ << 8 * (address++ & 3);
-
-                               retval = dap_queue_ap_write(dap,
-                                               AP_REG_DRW, outvalue);
-                               if (retval != ERROR_OK)
-                                       break;
-
-                               retval = dap_run(dap);
-                               if (retval != ERROR_OK) {
-                                       LOG_WARNING("Block write error address "
-                                               "0x%" PRIx32 ", count 0x%x",
-                                               address, count);
-                                       return retval;
-                               }
-                       }
-
-                       writecount -= nbytes >> 1;
-
-               } while (writecount);
-               wcount -= blocksize;
-       }
-
-       return retval;
-}
-
-int mem_ap_write_buf_u16(struct adiv5_dap *dap, const uint8_t *buffer, int count, uint32_t address)
-{
-       int retval = ERROR_OK;
-
-       if (dap->packed_transfers && count >= 4)
-               return mem_ap_write_buf_packed_u16(dap, buffer, count, address);
-
-       while (count > 0) {
-               retval = dap_setup_accessport(dap, CSW_16BIT | CSW_ADDRINC_SINGLE, address);

                if (retval != ERROR_OK)
                if (retval != ERROR_OK)

-                       return retval;
+                       break;

 
 

+               /* How many source bytes each transfer will consume, and their location in the DRW,
+                * depends on the type of transfer and alignment. See ARM document IHI0031C. */

                uint32_t outvalue = 0;
                uint32_t outvalue = 0;

-               outvalue |= (uint32_t)*buffer++ << 8 * (address++ & 3);
-               outvalue |= (uint32_t)*buffer++ << 8 * (address++ & 3);
+               switch (this_size) {
+               case 4:
+                       outvalue |= (uint32_t)*buffer++ << 8 * (address++ & 3);
+                       outvalue |= (uint32_t)*buffer++ << 8 * (address++ & 3);
+               case 2:
+                       outvalue |= (uint32_t)*buffer++ << 8 * (address++ & 3);
+               case 1:
+                       outvalue |= (uint32_t)*buffer++ << 8 * (address++ & 3);
+               }
+
+               nbytes -= this_size;

 
                retval = dap_queue_ap_write(dap, AP_REG_DRW, outvalue);
                if (retval != ERROR_OK)
                        break;
 
 
                retval = dap_queue_ap_write(dap, AP_REG_DRW, outvalue);
                if (retval != ERROR_OK)
                        break;
 

+               /* Rewrite TAR if it wrapped */
+               if (addrinc && address % dap->tar_autoincr_block < size && nbytes > 0) {
+                       retval = dap_setup_accessport_tar(dap, address);
+                       if (retval != ERROR_OK)
+                               break;
+               }
+       }
+
+       /* REVISIT: Might want to have a queued version of this function that does not run. */
+       if (retval == ERROR_OK)

                retval = dap_run(dap);
                retval = dap_run(dap);

-               if (retval != ERROR_OK)
-                       break;

 
 

-               count -= 2;
+       if (retval != ERROR_OK) {
+               uint32_t tar;
+               if (dap_queue_ap_read(dap, AP_REG_TAR, &tar) == ERROR_OK
+                               && dap_run(dap) == ERROR_OK)
+                       LOG_ERROR("Failed to write memory at 0x%08"PRIx32, tar);
+               else
+                       LOG_ERROR("Failed to write memory and, additionally, failed to find out where");

        }
 
        return retval;
 }
 
        }
 
        return retval;
 }
 

-static int mem_ap_write_buf_packed_u8(struct adiv5_dap *dap,
-               const uint8_t *buffer, int count, uint32_t address)
+/* Compatibility wrappers around mem_ap_write(). Note that the count is in bytes for these. */
+int mem_ap_write_buf_u32(struct adiv5_dap *dap, const uint8_t *buffer, int count, uint32_t address, bool addr_incr)

 {
 {

-       int retval = ERROR_OK;
-       int wcount, blocksize, writecount;
-
-       wcount = count;
-
-       while (wcount > 0) {
-               int nbytes;
-
-               /* Adjust to write blocks within boundaries aligned to the TAR auto-increment size */
-               blocksize = max_tar_block_size(dap->tar_autoincr_block, address);
-
-               if (wcount < blocksize)
-                       blocksize = wcount;
-
-               retval = dap_setup_accessport(dap, CSW_8BIT | CSW_ADDRINC_PACKED, address);
-               if (retval != ERROR_OK)
-                       return retval;
-               writecount = blocksize;
-
-               do {
-                       nbytes = MIN(writecount, 4);
-
-                       if (nbytes < 4) {
-                               retval = mem_ap_write_buf_u8(dap, buffer, nbytes, address);
-                               if (retval != ERROR_OK) {
-                                       LOG_WARNING("Block write error address "
-                                               "0x%" PRIx32 ", count 0x%x",
-                                               address, count);
-                                       return retval;
-                               }
-
-                               address += nbytes;
-                               buffer += nbytes;
-                       } else {
-                               assert(nbytes == 4);
-
-                               uint32_t outvalue = 0;
-                               outvalue |= (uint32_t)*buffer++ << 8 * (address++ & 3);
-                               outvalue |= (uint32_t)*buffer++ << 8 * (address++ & 3);
-                               outvalue |= (uint32_t)*buffer++ << 8 * (address++ & 3);
-                               outvalue |= (uint32_t)*buffer++ << 8 * (address++ & 3);
-
-                               retval = dap_queue_ap_write(dap,
-                                               AP_REG_DRW, outvalue);
-                               if (retval != ERROR_OK)
-                                       break;
-
-                               retval = dap_run(dap);
-                               if (retval != ERROR_OK) {
-                                       LOG_WARNING("Block write error address "
-                                               "0x%" PRIx32 ", count 0x%x",
-                                               address, count);
-                                       return retval;
-                               }
-                       }
-
-                       writecount -= nbytes;
-
-               } while (writecount);
-               wcount -= blocksize;
-       }
+       return mem_ap_write(dap, buffer, 4, count / 4, address, true);
+}

 
 

-       return retval;
+int mem_ap_write_buf_u16(struct adiv5_dap *dap, const uint8_t *buffer, int count, uint32_t address)
+{
+       return mem_ap_write(dap, buffer, 2, count / 2, address, true);

 }
 
 int mem_ap_write_buf_u8(struct adiv5_dap *dap, const uint8_t *buffer, int count, uint32_t address)
 {
 }
 
 int mem_ap_write_buf_u8(struct adiv5_dap *dap, const uint8_t *buffer, int count, uint32_t address)
 {

-       int retval = ERROR_OK;
-
-       if (dap->packed_transfers && count >= 4)
-               return mem_ap_write_buf_packed_u8(dap, buffer, count, address);
-
-       while (count > 0) {
-               retval = dap_setup_accessport(dap, CSW_8BIT | CSW_ADDRINC_SINGLE, address);
-               if (retval != ERROR_OK)
-                       return retval;
-               uint32_t outvalue = (uint32_t)*buffer++ << 8 * (address++ & 0x3);
-               retval = dap_queue_ap_write(dap, AP_REG_DRW, outvalue);
-               if (retval != ERROR_OK)
-                       break;
-
-               retval = dap_run(dap);
-               if (retval != ERROR_OK)
-                       break;
-
-               count--;
-       }
-
-       return retval;
+       return mem_ap_write(dap, buffer, 1, count, address, true);

 }
 
 /**
 }
 
 /**

- * Synchronously read a block of 32-bit words into a buffer
+ * Synchronous read of a block of memory, using a specific access size.
+ *

  * @param dap The DAP connected to the MEM-AP.
  * @param dap The DAP connected to the MEM-AP.

- * @param buffer where the words will be stored (in host byte order).
- * @param count How many words to read.
- * @param address Memory address from which to read words; all the
- * @param addr_incr if true, increment the source address for each u32
- *     words must be readable by the currently selected MEM-AP.
+ * @param buffer The data buffer to receive the data. No particular alignment is assumed.
+ * @param size Which access size to use, in bytes. 1, 2 or 4.
+ * @param count The number of reads to do (in size units, not bytes).
+ * @param address Address to be read; it must be readable by the currently selected MEM-AP.
+ * @param addrinc Whether the target address should be increased after each read or not. This
+ *  should normally be true, except when reading from e.g. a FIFO.
+ * @return ERROR_OK on success, otherwise an error code.

  */
  */

-int mem_ap_read_buf_u32(struct adiv5_dap *dap, uint8_t *buffer,
-               int count, uint32_t address, bool addr_incr)
+int mem_ap_read(struct adiv5_dap *dap, uint8_t *buffer, uint32_t size, uint32_t count,
+               uint32_t adr, bool addrinc)

 {
 {

-       int wcount, blocksize, readcount, errorcount = 0, retval = ERROR_OK;
-       uint32_t adr = address;
-       uint8_t *pBuffer = buffer;
-       uint32_t incr_flag = CSW_ADDRINC_OFF;
-
-       count >>= 2;
-       wcount = count;
-
-       while (wcount > 0) {
-               /* Adjust to read blocks within boundaries aligned to the
-                * TAR autoincrement size (at least 2^10).  Autoincrement
-                * mode avoids an extra per-word roundtrip to update TAR.
-                */
-               blocksize = max_tar_block_size(dap->tar_autoincr_block, address) / 4;
-               if (wcount < blocksize)
-                       blocksize = wcount;
+       size_t nbytes = size * count;
+       const uint32_t csw_addrincr = addrinc ? CSW_ADDRINC_SINGLE : CSW_ADDRINC_OFF;
+       uint32_t csw_size;
+       uint32_t address = adr;
+       int retval;
+
+       if (size == 4)
+               csw_size = CSW_32BIT;
+       else if (size == 2)
+               csw_size = CSW_16BIT;
+       else if (size == 1)
+               csw_size = CSW_8BIT;
+       else
+               return ERROR_TARGET_UNALIGNED_ACCESS;
+
+       /* Allocate buffer to hold the sequence of DRW reads that will be made. This is a significant
+        * over-allocation if packed transfers are going to be used, but determining the real need at
+        * this point would be messy. */
+       uint32_t *read_buf = malloc(count * sizeof(uint32_t));
+       uint32_t *read_ptr = read_buf;
+       if (read_buf == NULL) {
+               LOG_ERROR("Failed to allocate read buffer");
+               return ERROR_FAIL;
+       }

 
 

-               /* handle unaligned data at 4k boundary */
-               if (blocksize == 0)
-                       blocksize = 1;
+       retval = dap_setup_accessport_tar(dap, address);
+       if (retval != ERROR_OK)
+               return retval;

 
 

-               if (addr_incr)
-                       incr_flag = CSW_ADDRINC_SINGLE;
+       /* Queue up all reads. Each read will store the entire DRW word in the read buffer. How many
+        * useful bytes it contains, and their location in the word, depends on the type of transfer
+        * and alignment. */
+       while (nbytes > 0) {
+               uint32_t this_size = size;
+
+               /* Select packed transfer if possible */
+               if (addrinc && dap->packed_transfers && nbytes >= 4
+                               && max_tar_block_size(dap->tar_autoincr_block, address) >= 4) {
+                       this_size = 4;
+                       retval = dap_setup_accessport_csw(dap, csw_size | CSW_ADDRINC_PACKED);
+               } else {
+                       retval = dap_setup_accessport_csw(dap, csw_size | csw_addrincr);
+               }
+               if (retval != ERROR_OK)
+                       break;

 
 

-               retval = dap_setup_accessport(dap, CSW_32BIT | incr_flag,
-                               address);
+               retval = dap_queue_ap_read(dap, AP_REG_DRW, read_ptr++);

                if (retval != ERROR_OK)
                if (retval != ERROR_OK)

-                       return retval;
+                       break;

 
 

-               retval = dap_queue_ap_read_block(dap, AP_REG_DRW, blocksize, buffer);
+               nbytes -= this_size;
+               address += this_size;

 
 

-               retval = dap_run(dap);
-               if (retval != ERROR_OK) {
-                       errorcount++;
-                       if (errorcount <= 1) {
-                               /* try again */
-                               continue;
-                       }
-                       LOG_WARNING("Block read error address 0x%" PRIx32, address);
-                       return retval;
+               /* Rewrite TAR if it wrapped */
+               if (addrinc && address % dap->tar_autoincr_block < size && nbytes > 0) {
+                       retval = dap_setup_accessport_tar(dap, address);
+                       if (retval != ERROR_OK)
+                               break;

                }
                }

-               wcount = wcount - blocksize;
-               if (addr_incr)
-                       address += 4 * blocksize;
-               buffer += 4 * blocksize;

        }
 
        }
 

-       /* if we have an unaligned access - reorder data */
-       if (adr & 0x3u) {
-               for (readcount = 0; readcount < count; readcount++) {
-                       int i;
-                       uint32_t data;
-                       memcpy(&data, pBuffer, sizeof(uint32_t));
-
-                       for (i = 0; i < 4; i++) {
-                               *((uint8_t *)pBuffer) =
-                                               (data >> 8 * (adr & 0x3));
-                               pBuffer++;
-                               adr++;
-                       }
+       if (retval == ERROR_OK)
+               retval = dap_run(dap);
+
+       /* Restore state */
+       address = adr;
+       nbytes = size * count;
+       read_ptr = read_buf;
+
+       /* If something failed, read TAR to find out how much data was successfully read, so we can
+        * at least give the caller what we have. */
+       if (retval != ERROR_OK) {
+               uint32_t tar;
+               if (dap_queue_ap_read(dap, AP_REG_TAR, &tar) == ERROR_OK
+                               && dap_run(dap) == ERROR_OK) {
+                       LOG_ERROR("Failed to read memory at 0x%08"PRIx32, tar);
+                       if (nbytes > tar - address)
+                               nbytes = tar - address;
+               } else {
+                       LOG_ERROR("Failed to read memory and, additionally, failed to find out where");
+                       nbytes = 0;

                }
        }
 
                }
        }
 

-       return retval;
-}
-
-static int mem_ap_read_buf_packed_u16(struct adiv5_dap *dap,
-               uint8_t *buffer, int count, uint32_t address)
-{
-       uint32_t invalue;
-       int retval = ERROR_OK;
-       int wcount, blocksize, readcount, i;
-
-       wcount = count >> 1;
-
-       while (wcount > 0) {
-               int nbytes;
-
-               /* Adjust to read blocks within boundaries aligned to the TAR autoincremnent size*/
-               blocksize = max_tar_block_size(dap->tar_autoincr_block, address) / 2;
-               if (wcount < blocksize)
-                       blocksize = wcount;
-
-               retval = dap_setup_accessport(dap, CSW_16BIT | CSW_ADDRINC_PACKED, address);
-               if (retval != ERROR_OK)
-                       return retval;
+       /* Replay loop to populate caller's buffer from the correct word and byte lane */
+       while (nbytes > 0) {
+               uint32_t this_size = size;

 
 

-               /* handle unaligned data at 4k boundary */
-               if (blocksize == 0)
-                       blocksize = 1;
-               readcount = blocksize;
-
-               do {
-                       retval = dap_queue_ap_read(dap, AP_REG_DRW, &invalue);
-                       if (retval != ERROR_OK)
-                               return retval;
-                       retval = dap_run(dap);
-                       if (retval != ERROR_OK) {
-                               LOG_WARNING("Block read error address 0x%" PRIx32 ", count 0x%x", address, count);
-                               return retval;
-                       }
-
-                       nbytes = MIN((readcount << 1), 4);
+               if (addrinc && dap->packed_transfers && nbytes >= 4
+                               && max_tar_block_size(dap->tar_autoincr_block, address) >= 4) {
+                       this_size = 4;
+               }

 
 

-                       for (i = 0; i < nbytes; i++) {
-                               *((uint8_t *)buffer) = (invalue >> 8 * (address & 0x3));
-                               buffer++;
-                               address++;
-                       }
+               switch (this_size) {
+               case 4:
+                       *buffer++ = *read_ptr >> 8 * (address++ & 3);
+                       *buffer++ = *read_ptr >> 8 * (address++ & 3);
+               case 2:
+                       *buffer++ = *read_ptr >> 8 * (address++ & 3);
+               case 1:
+                       *buffer++ = *read_ptr >> 8 * (address++ & 3);
+               }

 
 

-                       readcount -= (nbytes >> 1);
-               } while (readcount);
-               wcount -= blocksize;
+               read_ptr++;
+               nbytes -= this_size;

        }
 
        }
 

+       free(read_buf);

        return retval;
 }
 
        return retval;
 }
 

-/**
- * Synchronously read a block of 16-bit halfwords into a buffer
- * @param dap The DAP connected to the MEM-AP.
- * @param buffer where the halfwords will be stored (in host byte order).
- * @param count How many halfwords to read.
- * @param address Memory address from which to read words; all the
- *     words must be readable by the currently selected MEM-AP.
- */
-int mem_ap_read_buf_u16(struct adiv5_dap *dap, uint8_t *buffer,
-               int count, uint32_t address)
+/* Compatibility wrappers around mem_ap_read(). Note that the count is in bytes for these (despite
+ * what their doxygen documentation said). */
+int mem_ap_read_buf_u32(struct adiv5_dap *dap, uint8_t *buffer,
+               int count, uint32_t address, bool addr_incr)

 {
 {

-       uint32_t invalue, i;
-       int retval = ERROR_OK;
-
-       if (dap->packed_transfers && count >= 4)
-               return mem_ap_read_buf_packed_u16(dap, buffer, count, address);
-
-       while (count > 0) {
-               retval = dap_setup_accessport(dap, CSW_16BIT | CSW_ADDRINC_SINGLE, address);
-               if (retval != ERROR_OK)
-                       return retval;
-               retval = dap_queue_ap_read(dap, AP_REG_DRW, &invalue);
-               if (retval != ERROR_OK)
-                       break;
-
-               retval = dap_run(dap);
-               if (retval != ERROR_OK)
-                       break;
-
-               if (address & 0x1) {
-                       for (i = 0; i < 2; i++) {
-                               *((uint8_t *)buffer) = (invalue >> 8 * (address & 0x3));
-                               buffer++;
-                               address++;
-                       }
-               } else {
-                       uint16_t svalue = (invalue >> 8 * (address & 0x3));
-                       memcpy(buffer, &svalue, sizeof(uint16_t));
-                       address += 2;
-                       buffer += 2;
-               }
-               count -= 2;
-       }
-
-       return retval;
+       return mem_ap_read(dap, buffer, 4, count / 4, address, addr_incr);

 }
 
 }
 

-/* FIX!!! is this a potential performance bottleneck w.r.t. requiring too many
- * roundtrips when jtag_execute_queue() has a large overhead(e.g. for USB)s?
- *
- * The solution is to arrange for a large out/in scan in this loop and
- * and convert data afterwards.
- */
-static int mem_ap_read_buf_packed_u8(struct adiv5_dap *dap,
-               uint8_t *buffer, int count, uint32_t address)
+int mem_ap_read_buf_u16(struct adiv5_dap *dap, uint8_t *buffer,
+               int count, uint32_t address)

 {
 {

-       uint32_t invalue;
-       int retval = ERROR_OK;
-       int wcount, blocksize, readcount, i;
-
-       wcount = count;
-
-       while (wcount > 0) {
-               int nbytes;
-
-               /* Adjust to read blocks within boundaries aligned to the TAR autoincremnent size*/
-               blocksize = max_tar_block_size(dap->tar_autoincr_block, address);
-
-               if (wcount < blocksize)
-                       blocksize = wcount;
-
-               retval = dap_setup_accessport(dap, CSW_8BIT | CSW_ADDRINC_PACKED, address);
-               if (retval != ERROR_OK)
-                       return retval;
-               readcount = blocksize;
-
-               do {
-                       retval = dap_queue_ap_read(dap, AP_REG_DRW, &invalue);
-                       if (retval != ERROR_OK)
-                               return retval;
-                       retval = dap_run(dap);
-                       if (retval != ERROR_OK) {
-                               LOG_WARNING("Block read error address 0x%" PRIx32 ", count 0x%x", address, count);
-                               return retval;
-                       }
-
-                       nbytes = MIN(readcount, 4);
-
-                       for (i = 0; i < nbytes; i++) {
-                               *((uint8_t *)buffer) = (invalue >> 8 * (address & 0x3));
-                               buffer++;
-                               address++;
-                       }
-
-                       readcount -= nbytes;
-               } while (readcount);
-               wcount -= blocksize;
-       }
-
-       return retval;
+       return mem_ap_read(dap, buffer, 2, count / 2, address, true);

 }
 
 }
 

-/**
- * Synchronously read a block of bytes into a buffer
- * @param dap The DAP connected to the MEM-AP.
- * @param buffer where the bytes will be stored.
- * @param count How many bytes to read.
- * @param address Memory address from which to read data; all the
- *     data must be readable by the currently selected MEM-AP.
- */

 int mem_ap_read_buf_u8(struct adiv5_dap *dap, uint8_t *buffer,
                int count, uint32_t address)
 {
 int mem_ap_read_buf_u8(struct adiv5_dap *dap, uint8_t *buffer,
                int count, uint32_t address)
 {

-       uint32_t invalue;
-       int retval = ERROR_OK;
-
-       if (dap->packed_transfers && count >= 4)
-               return mem_ap_read_buf_packed_u8(dap, buffer, count, address);
-
-       while (count > 0) {
-               retval = dap_setup_accessport(dap, CSW_8BIT | CSW_ADDRINC_SINGLE, address);
-               if (retval != ERROR_OK)
-                       return retval;
-               retval = dap_queue_ap_read(dap, AP_REG_DRW, &invalue);
-               if (retval != ERROR_OK)
-                       return retval;
-               retval = dap_run(dap);
-               if (retval != ERROR_OK)
-                       break;
-
-               *((uint8_t *)buffer) = (invalue >> 8 * (address & 0x3));
-               count--;
-               address++;
-               buffer++;
-       }
-
-       return retval;
+       return mem_ap_read(dap, buffer, 1, count, address, true);

 }
 
 /*--------------------------------------------------------------------*/
 }
 
 /*--------------------------------------------------------------------*/

diff --git a/src/target/arm_adi_v5.h b/src/target/arm_adi_v5.h
index 7cc90b241521ee77e5939244404eb4d9f289d049..f2f29a47b9947850b099105b612d8f5f5f751320 100644 (file)
--- a/src/target/arm_adi_v5.h
+++ b/src/target/arm_adi_v5.h
@@ -410,6 +410,8 @@ int mem_ap_read_buf_u16(struct adiv5_dap *swjdp,
                uint8_t *buffer, int count, uint32_t address);
 int mem_ap_read_buf_u32(struct adiv5_dap *swjdp,
                uint8_t *buffer, int count, uint32_t address, bool addr_incr);
                uint8_t *buffer, int count, uint32_t address);
 int mem_ap_read_buf_u32(struct adiv5_dap *swjdp,
                uint8_t *buffer, int count, uint32_t address, bool addr_incr);

+int mem_ap_read(struct adiv5_dap *dap, uint8_t *buffer, uint32_t size,
+               uint32_t count, uint32_t address, bool addrinc);

 
 int mem_ap_write_buf_u8(struct adiv5_dap *swjdp,
                const uint8_t *buffer, int count, uint32_t address);
 
 int mem_ap_write_buf_u8(struct adiv5_dap *swjdp,
                const uint8_t *buffer, int count, uint32_t address);


@@ -417,6 +419,9 @@ int mem_ap_write_buf_u16(struct adiv5_dap *swjdp,
                const uint8_t *buffer, int count, uint32_t address);
 int mem_ap_write_buf_u32(struct adiv5_dap *swjdp,
                const uint8_t *buffer, int count, uint32_t address, bool addr_incr);
                const uint8_t *buffer, int count, uint32_t address);
 int mem_ap_write_buf_u32(struct adiv5_dap *swjdp,
                const uint8_t *buffer, int count, uint32_t address, bool addr_incr);

+int mem_ap_write(struct adiv5_dap *dap, const uint8_t *buffer, uint32_t size,
+               uint32_t count, uint32_t address, bool addrinc);
+

 
 /* Queued MEM-AP memory mapped single word transfers with selection of ap */
 int mem_ap_sel_read_u32(struct adiv5_dap *swjdp, uint8_t ap,
 
 /* Queued MEM-AP memory mapped single word transfers with selection of ap */
 int mem_ap_sel_read_u32(struct adiv5_dap *swjdp, uint8_t ap,