Remove since long deprecated ft2232 driver 36/3236/3
authorAndreas Fritiofson <andreas.fritiofson@gmail.com>
Mon, 15 Feb 2016 20:59:28 +0000 (21:59 +0100)
committerAndreas Fritiofson <andreas.fritiofson@gmail.com>
Sun, 6 Nov 2016 09:45:06 +0000 (09:45 +0000)
Purge all legacy interface configurations so there's no more confusion
over which one to use.

Also remove doc/INSTALL.txt which mentions ft2232 but otherwise just
duplicates what INSTALL says.

Change-Id: Ic94f808f123d4917e600b79309f1272c78a7bb11
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/3236
Tested-by: jenkins
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
62 files changed:
README
TODO
configure.ac
doc/INSTALL.txt [deleted file]
doc/Makefile.am
doc/manual/release.txt
doc/openocd.texi
src/jtag/drivers/Makefile.am
src/jtag/drivers/ft2232.c [deleted file]
src/jtag/drivers/ftd2xx_common.h
src/jtag/interfaces.c
tcl/interface/axm0432.cfg [deleted file]
tcl/interface/busblaster.cfg [deleted file]
tcl/interface/calao-usb-a9260-c01.cfg [deleted file]
tcl/interface/calao-usb-a9260-c02.cfg [deleted file]
tcl/interface/cortino.cfg [deleted file]
tcl/interface/digilent-hs1.cfg [deleted file]
tcl/interface/dlp-usb1232h.cfg [deleted file]
tcl/interface/flossjtag-noeeprom.cfg [deleted file]
tcl/interface/flossjtag.cfg [deleted file]
tcl/interface/flyswatter.cfg [deleted file]
tcl/interface/flyswatter2.cfg [deleted file]
tcl/interface/hilscher_nxhx10_etm.cfg [deleted file]
tcl/interface/hilscher_nxhx500_etm.cfg [deleted file]
tcl/interface/hilscher_nxhx500_re.cfg [deleted file]
tcl/interface/hilscher_nxhx50_etm.cfg [deleted file]
tcl/interface/hilscher_nxhx50_re.cfg [deleted file]
tcl/interface/hitex_str9-comstick.cfg [deleted file]
tcl/interface/icebear.cfg [deleted file]
tcl/interface/jtag-lock-pick_tiny_2.cfg [deleted file]
tcl/interface/jtagkey-tiny.cfg [deleted file]
tcl/interface/jtagkey.cfg [deleted file]
tcl/interface/jtagkey2.cfg [deleted file]
tcl/interface/jtagkey2p.cfg [deleted file]
tcl/interface/kt-link.cfg [deleted file]
tcl/interface/lisa-l.cfg [deleted file]
tcl/interface/luminary-icdi.cfg [deleted file]
tcl/interface/luminary-lm3s811.cfg [deleted file]
tcl/interface/luminary.cfg [deleted file]
tcl/interface/minimodule.cfg [deleted file]
tcl/interface/neodb.cfg [deleted file]
tcl/interface/ngxtech.cfg [deleted file]
tcl/interface/olimex-arm-usb-ocd-h.cfg [deleted file]
tcl/interface/olimex-arm-usb-ocd.cfg [deleted file]
tcl/interface/olimex-arm-usb-tiny-h.cfg [deleted file]
tcl/interface/olimex-jtag-tiny.cfg [deleted file]
tcl/interface/oocdlink.cfg [deleted file]
tcl/interface/opendous_ftdi.cfg [deleted file]
tcl/interface/openocd-usb-hs.cfg [deleted file]
tcl/interface/openocd-usb.cfg [deleted file]
tcl/interface/openrd.cfg [deleted file]
tcl/interface/redbee-econotag.cfg [deleted file]
tcl/interface/redbee-usb.cfg [deleted file]
tcl/interface/sheevaplug.cfg [deleted file]
tcl/interface/signalyzer-h2.cfg [deleted file]
tcl/interface/signalyzer-h4.cfg [deleted file]
tcl/interface/signalyzer-lite.cfg [deleted file]
tcl/interface/signalyzer.cfg [deleted file]
tcl/interface/stm32-stick.cfg [deleted file]
tcl/interface/turtelizer2.cfg [deleted file]
tcl/interface/vpaclink.cfg [deleted file]
tcl/interface/xds100v2.cfg [deleted file]

diff --git a/README b/README
index df4bc3b..7ca5957 100644 (file)
--- a/README
+++ b/README
@@ -45,9 +45,6 @@ e.g.:
   openocd -f interface/stlink-v2-1.cfg -c "transport select hla_swd" \
           -f target/stm32l0.cfg
 
-NB: when using an FTDI-based adapter you should prefer configs in the
-ftdi directory; the old configs for the ft2232 are deprecated.
-
 After OpenOCD startup, connect GDB with
 
   (gdb) target extended-remote localhost:3333
@@ -228,7 +225,7 @@ USB-based adapters depend on libusb-1.0 and some older drivers require
 libusb-0.1 or libusb-compat-0.1. A compatible implementation, such as
 FreeBSD's, additionally needs the corresponding .pc files.
 
-USB-Blaster, ASIX Presto, OpenJTAG and ft2232 interface adapter
+USB-Blaster, ASIX Presto and OpenJTAG interface adapter
 drivers need either one of:
   - libftdi: http://www.intra2net.com/en/developer/libftdi/index.php
   - ftd2xx: http://www.ftdichip.com/Drivers/D2XX.htm (proprietary,
diff --git a/TODO b/TODO
index f50af3e..aa43fdd 100644 (file)
--- a/TODO
+++ b/TODO
@@ -93,9 +93,6 @@ interface support:
   -# rewrite implementation to use non-blocking I/O
 - J-Link driver:
   - fix to work with long scan chains, such as R.Doss's svf test.
-- FT2232 (libftdi):
-  - make performance comparable to alternatives (on Win32, D2XX is faster)
-  - make usability comparable to alternatives
 - Autodetect USB based adapters; this should be easy on Linux.  If there's
   more than one, list the options; otherwise, just select that one.
 
index 52b2e96..5fb4d2c 100644 (file)
@@ -397,26 +397,6 @@ AC_ARG_ENABLE([parport_giveio],
       [Enable use of giveio for parport (for CygWin only)]),
     [parport_use_giveio=$enableval], [parport_use_giveio=])
 
-AC_ARG_ENABLE([ft2232_libftdi], [], [
-if test $enableval = yes; then
-  AC_MSG_ERROR([The ft2232 driver is deprecated, use --enable-ftdi to build its replacement, or force the old driver with --enable-legacy-ft2232_libftdi])
-fi
-])
-
-AC_ARG_ENABLE([ft2232_ftd2xx], [], [
-if test $enableval = yes; then
-  AC_MSG_ERROR([The ft2232 driver is deprecated, use --enable-ftdi to build its replacement, or force the old driver with --enable-legacy-ft2232_ftd2xx])
-fi
-])
-
-AC_ARG_ENABLE([legacy-ft2232_libftdi],
-  AS_HELP_STRING([--enable-legacy-ft2232_libftdi], [(DEPRECATED) Enable building support for FT2232 based devices using the libftdi library]),
-  [build_ft2232_libftdi=$enableval], [build_ft2232_libftdi=no])
-
-AC_ARG_ENABLE([legacy-ft2232_ftd2xx],
-  AS_HELP_STRING([--enable-legacy-ft2232_ftd2xx], [(DEPRECATED) Enable building support for FT2232 based devices using the D2XX library from ftdichip.com]),
-  [build_ft2232_ftd2xx=$enableval], [build_ft2232_ftd2xx=no])
-
 AC_ARG_ENABLE([jtag_vpi],
   AS_HELP_STRING([--enable-jtag_vpi], [Enable building support for JTAG VPI]),
   [build_jtag_vpi=$enableval], [build_jtag_vpi=no])
@@ -699,18 +679,6 @@ else
   AC_DEFINE([BUILD_BITBANG], [0], [0 if you don't want a bitbang interface.])
 fi
 
-if test $build_ft2232_libftdi = yes; then
-  AC_DEFINE([BUILD_FT2232_LIBFTDI], [1], [1 if you want libftdi ft2232.])
-else
-  AC_DEFINE([BUILD_FT2232_LIBFTDI], [0], [0 if you don't want libftdi ft2232.])
-fi
-
-if test $build_ft2232_ftd2xx = yes; then
-  AC_DEFINE([BUILD_FT2232_FTD2XX], [1], [1 if you want ftd2xx ft2232.])
-else
-  AC_DEFINE([BUILD_FT2232_FTD2XX], [0], [0 if you don't want ftd2xx ft2232.])
-fi
-
 if test $build_usb_blaster_libftdi = yes; then
   AC_DEFINE([BUILD_USB_BLASTER_LIBFTDI], [1], [1 if you want libftdi usb_blaster.])
 else
@@ -815,7 +783,7 @@ then
   AC_MSG_ERROR([The option: with_ftd2xx_linux_tardir is for LINUX only.])
 fi
 
-if test $build_ft2232_ftd2xx = yes -o $build_presto_ftd2xx = yes -o $build_usb_blaster_ftd2xx = yes -o $build_openjtag_ftd2xx = yes; then
+if test $build_presto_ftd2xx = yes -o $build_usb_blaster_ftd2xx = yes -o $build_openjtag_ftd2xx = yes; then
   AC_MSG_CHECKING([for ftd2xx.lib exists (win32)])
 
   # if we are given a zipdir...
@@ -864,7 +832,7 @@ then
    AC_MSG_ERROR([The option: with_ftd2xx_linux_tardir is for LINUX only.])
 fi
 
-if test $build_ft2232_ftd2xx = yes -o $build_presto_ftd2xx = yes -o $build_usb_blaster_ftd2xx = yes ; then
+if test $build_presto_ftd2xx = yes -o $build_usb_blaster_ftd2xx = yes ; then
    AC_MSG_CHECKING([for libftd2xx.a (darwin)])
 
    if test ! -f /usr/local/include/ftd2xx.h ; then
@@ -885,10 +853,10 @@ then
    AC_MSG_ERROR([The option: --with-ftd2xx-win32-zipdir is for win32 only])
 fi
 
-if test $build_ft2232_ftd2xx = yes -o $build_presto_ftd2xx = yes -o $build_usb_blaster_ftd2xx = yes -o $build_openjtag_ftd2xx = yes; then
+if test $build_presto_ftd2xx = yes -o $build_usb_blaster_ftd2xx = yes -o $build_openjtag_ftd2xx = yes; then
    # Must be linux
    if test $host_os != linux-gnu && test $host_os != linux ; then
-      AC_MSG_ERROR([The (linux) ftd2xx library from FTDICHIP.com is linux only. Try --enable-ft2232-libftdi instead])
+      AC_MSG_ERROR([The (linux) ftd2xx library from FTDICHIP.com is linux only. Try --enable-*-libftdi instead])
   fi
   # Are we given a TAR directory?
   if test "${with_ftd2xx_linux_tardir+set}" = set
@@ -948,7 +916,7 @@ if test $build_ft2232_ftd2xx = yes -o $build_presto_ftd2xx = yes -o $build_usb_b
 fi
 fi # linux
 
-if test $build_ft2232_ftd2xx = yes -o $build_presto_ftd2xx = yes -o $build_usb_blaster_ftd2xx = yes ; then
+if test $build_presto_ftd2xx = yes -o $build_usb_blaster_ftd2xx = yes ; then
 
 # Before we go any further - make sure we can *BUILD* and *RUN*
 # a simple app with the "ftd2xx.lib" file - in what ever form we where given
@@ -982,29 +950,6 @@ AC_RUN_IFELSE([AC_LANG_PROGRAM([[
     AC_MSG_RESULT([Skipping as we are cross-compiling])
   ])
 
-AC_MSG_CHECKING([for ftd2xx highspeed device support])
-AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
-#include "confdefs.h"
-#if IS_WIN32
-#include "windows.h"
-#endif
-#include <stdio.h>
-#include <ftd2xx.h>
-
-DWORD x = FT_DEVICE_4232H;
-    ]], [])], [
-      AC_DEFINE([BUILD_FT2232_HIGHSPEED], [1],
-        [Support FT2232H/FT4232HS with FTD2XX or libftdi.])
-      build_ft2232_highspeed=yes
-    ], [
-      build_ft2232_highspeed=no
-    ])
-  AC_MSG_RESULT([$build_ft2232_highspeed])
-
-  if test $build_ft2232_highspeed = no; then
-    AC_MSG_WARN([You need a newer FTD2XX driver (version 2.04.16 or later).])
-  fi
-
 AC_MSG_CHECKING([for ftd2xx FT232H device support])
 AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
 #include "confdefs.h"
@@ -1032,7 +977,7 @@ LDFLAGS=$LDFLAGS_SAVE
 CFLAGS=$CFLAGS_SAVE
 fi
 
-if test $build_ft2232_libftdi = yes -o $build_usb_blaster_libftdi = yes -o \
+if test $build_usb_blaster_libftdi = yes -o \
   $build_openjtag_ftdi = yes -o $build_presto_libftdi = yes; then
 
   # we can have libftdi or libftdi1, so check it and use the latest one
@@ -1079,25 +1024,6 @@ if test $build_ft2232_libftdi = yes -o $build_usb_blaster_libftdi = yes -o \
       AC_SEARCH_LIBS([ftdi_new], [], [], [AC_MSG_ERROR([Cannot link with libftdi])])
     ])
 
-AC_MSG_CHECKING([for libftdi highspeed device support])
-AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
-#include <stdio.h>
-#include <ftdi.h>
-  ]], [[
-enum ftdi_chip_type x = TYPE_2232H;
-    ]])], [
-      AC_DEFINE([BUILD_FT2232_HIGHSPEED], [1],
-        [Support FT2232H/FT4232HS with FTD2XX or libftdi.])
-      build_ft2232_highspeed=yes
-    ], [
-      build_ft2232_highspeed=no
-    ])
-    AC_MSG_RESULT([$build_ft2232_highspeed])
-
-    if test $build_ft2232_highspeed = no; then
-      AC_MSG_WARN([You need a newer libftdi version (0.16 or later).])
-    fi
-
 AC_MSG_CHECKING([for libftdi FT232H device support])
 AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
 #include <stdio.h>
@@ -1205,8 +1131,6 @@ AM_CONDITIONAL([IOUTIL], [test $build_ioutil = yes])
 AM_CONDITIONAL([AT91RM9200], [test $build_at91rm9200 = yes])
 AM_CONDITIONAL([BCM2835GPIO], [test $build_bcm2835gpio = yes])
 AM_CONDITIONAL([BITBANG], [test $build_bitbang = yes])
-AM_CONDITIONAL([FT2232_LIBFTDI], [test $build_ft2232_libftdi = yes])
-AM_CONDITIONAL([FT2232_DRIVER], [test $build_ft2232_ftd2xx = yes -o $build_ft2232_libftdi = yes])
 AM_CONDITIONAL([USB_BLASTER_LIBFTDI], [test $build_usb_blaster_libftdi = yes])
 AM_CONDITIONAL([USB_BLASTER_FTD2XX], [test $build_usb_blaster_ftd2xx = yes])
 AM_CONDITIONAL([JTAG_VPI], [test $build_jtag_vpi = yes -o $build_jtag_vpi = yes])
@@ -1329,12 +1253,3 @@ m4_foreach([adapter], [USB1_ADAPTERS, USB_ADAPTERS, USB0_ADAPTERS,
        esac
 ])
 echo
-
-if test $build_ft2232_libftdi = yes -o $build_ft2232_ftd2xx = yes; then
-       if test $enable_ftdi = no; then
-               AC_MSG_WARN([Building the deprecated 'ft2232' adapter driver but not its replacement!])
-               AC_MSG_WARN([Please consider using --enable-ftdi instead.])
-       else
-               AC_MSG_WARN([Building the deprecated 'ft2232' adapter driver.])
-       fi
-fi
diff --git a/doc/INSTALL.txt b/doc/INSTALL.txt
deleted file mode 100644 (file)
index c329be2..0000000
+++ /dev/null
@@ -1,204 +0,0 @@
-TODO!!! this should be merged into openocd.texi!!!
-
-
-Prerequisites
-=============
-
-When building with support for FTDI FT2232 based devices, you need at least
-one of the following libraries:
-
-- libftdi (http://www.intra2net.com/opensource/ftdi/)
-- libftd2xx (http://www.ftdichip.com/Drivers/D2XX.htm)
-
-On Windows, you need either Cygwin or MinGW, but compilation for MinGW is also
-possible using a Cygwin host.
-
-Basic Installation
-==================
-
-   OpenOCD is distributed without autotools generated files, i.e. without a
-configure script. Run ./bootstrap in the openocd directory to have all
-necessary files generated.
-
-   You have to explicitly enable desired JTAG interfaces during configure:
-
-./configure --enable-parport --enable-ft2232-libftdi (OR  --enable-ft2232-ftd2xx) \
-            --enable-amtjtagaccel
-
-   Under Windows/Cygwin, only the ftd2xx driver is supported for FT2232 based
-devices. You have to specify the location of the FTDI driver package with the
---with-ftd2xx=/full/path/name option.
-
-Under Linux you can choose to build the parport driver with support for
-/dev/parportN instead of the default access with direct port I/O using
---enable-parport_ppdev. This has the advantage of running OpenOCD without root
-privileges at the expense of a slight performance decrease. This is also
-available on FreeBSD using PPI, but the naming of the devices is different.
-
-Generic installation instructions
-=================================
-
-   These are generic installation instructions.
-
-   The `configure' shell script attempts to guess correct values for
-various system-dependent variables used during compilation.  It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions.  Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, a file
-`config.cache' that saves the results of its tests to speed up
-reconfiguring, and a file `config.log' containing compiler output
-(useful mainly for debugging `configure').
-
-   If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
-be considered for the next release.  If at some point `config.cache'
-contains results you don't want to keep, you may remove or edit it.
-
-   The file `configure.in' is used to create `configure' by a program
-called `autoconf'.  You only need `configure.in' if you want to change
-it or regenerate `configure' using a newer version of `autoconf'.
-
-The simplest way to compile this package is:
-
-  1. `cd' to the directory containing the package's source code and type
-     `./configure' to configure the package for your system.  If you're
-     using `csh' on an old version of System V, you might need to type
-     `sh ./configure' instead to prevent `csh' from trying to execute
-     `configure' itself.
-
-     Running `configure' takes a while.  While running, it prints some
-     messages telling which features it is checking for.
-
-  2. Type `make' to compile the package.
-
-  3. Type `make install' to install the programs and any data files and
-     documentation.
-
-  4. You can remove the program binaries and object files from the
-     source code directory by typing `make clean'.
-
-Compilers and Options
-=====================
-
-   Some systems require unusual options for compilation or linking that
-the `configure' script does not know about.  You can give `configure'
-initial values for variables by setting them in the environment.  Using
-a Bourne-compatible shell, you can do that on the command line like
-this:
-     CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
-
-Or on systems that have the `env' program, you can do it like this:
-     env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
-
-Compiling For Multiple Architectures
-====================================
-
-   You can compile the package for more than one kind of computer at the
-same time, by placing the object files for each architecture in their
-own directory.  To do this, you must use a version of `make' that
-supports the `VPATH' variable, such as GNU `make'.  `cd' to the
-directory where you want the object files and executables to go and run
-the `configure' script.  `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.
-
-   If you have to use a `make' that does not supports the `VPATH'
-variable, you have to compile the package for one architecture at a time
-in the source code directory.  After you have installed the package for
-one architecture, use `make distclean' before reconfiguring for another
-architecture.
-
-Installation Names
-==================
-
-   By default, `make install' will install the package's files in
-`/usr/local/bin', `/usr/local/man', etc.  You can specify an
-installation prefix other than `/usr/local' by giving `configure' the
-option `--prefix=PATH'.
-
-   You can specify separate installation prefixes for
-architecture-specific files and architecture-independent files.  If you
-give `configure' the option `--exec-prefix=PATH', the package will use
-PATH as the prefix for installing programs and libraries.
-Documentation and other data files will still use the regular prefix.
-
-   If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-
-Optional Features
-=================
-
-   Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System).  The
-`README' should mention any `--enable-' and `--with-' options that the
-package recognizes.
-
-   For packages that use the X Window System, `configure' can usually
-find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
-
-Specifying the System Type
-==========================
-
-   There may be some features `configure' can not figure out
-automatically, but needs to determine by the type of host the package
-will run on.  Usually `configure' can figure that out, but if it prints
-a message saying it can not guess the host type, give it the
-`--host=TYPE' option.  TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name with three fields:
-     CPU-COMPANY-SYSTEM
-
-See the file `config.sub' for the possible values of each field.  If
-`config.sub' isn't included in this package, then this package doesn't
-need to know the host type.
-
-   If you are building compiler tools for cross-compiling, you can also
-use the `--target=TYPE' option to select the type of system they will
-produce code for and the `--build=TYPE' option to select the type of
-system on which you are compiling the package.
-
-Sharing Defaults
-================
-
-   If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists.  Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
-
-Operation Controls
-==================
-
-   `configure' recognizes the following options to control how it
-operates.
-
-`--cache-file=FILE'
-     Use and save the results of the tests in FILE instead of
-     `./config.cache'.  Set FILE to `/dev/null' to disable caching, for
-     debugging `configure'.
-
-`--help'
-     Print a summary of the options to `configure', and exit.
-
-`--quiet'
-`--silent'
-`-q'
-     Do not print messages saying which checks are being made.
-
-`--srcdir=DIR'
-     Look for the package's source code in directory DIR.  Usually
-     `configure' can determine that directory automatically.
-
-`--version'
-     Print the version of Autoconf used to generate the `configure'
-     script, and exit.
-
-`configure' also accepts some other, not widely useful, options.
-
index 935c8f9..24f68a1 100644 (file)
@@ -2,8 +2,7 @@ info_TEXINFOS = openocd.texi
 openocd_TEXINFOS = fdl.texi
 man_MANS = openocd.1
 EXTRA_DIST = openocd.1 \
-       manual \
-       INSTALL.txt
+       manual
 
 MAINTAINERCLEANFILES = \
        $(srcdir)/Makefile.in \
index d144756..83f668f 100644 (file)
@@ -334,7 +334,7 @@ git tag -m "The openocd-${PACKAGE_VERSION} release." "${PACKAGE_TAG}"
      configuring its contents, using them to build a copy of OpenOCD,
      and verifying that the result prints the correct release version
      in its startup banner.  (For example,
-     "configure --enable-ft2232_libftdi --enable-parport"
+     "configure --enable-parport"
      then "make" and run "src/openocd -v" as a sanity check.)
   -# Run <code>make docs</code> to create the
      documentation which will be published.
index ff5593d..34cf69d 100644 (file)
@@ -898,7 +898,7 @@ using a Signalyzer FT2232-based JTAG adapter to talk to
 a board with an Atmel AT91SAM7X256 microcontroller:
 
 @example
-source [find interface/signalyzer.cfg]
+source [find interface/ftdi/signalyzer.cfg]
 
 # GDB can also flash my flash!
 gdb_memory_map enable
@@ -910,7 +910,7 @@ source [find target/sam7x256.cfg]
 Here is the command line equivalent of that configuration:
 
 @example
-openocd -f interface/signalyzer.cfg \
+openocd -f interface/ftdi/signalyzer.cfg \
         -c "gdb_memory_map enable" \
         -c "gdb_flash_program enable" \
         -f target/sam7x256.cfg
@@ -2403,109 +2403,12 @@ A dummy software-only driver for debugging.
 Cirrus Logic EP93xx based single-board computer bit-banging (in development)
 @end deffn
 
-@deffn {Interface Driver} {ft2232}
-FTDI FT2232 (USB) based devices over one of the userspace libraries.
-
-Note that this driver has several flaws and the @command{ftdi} driver is
-recommended as its replacement.
-
-These interfaces have several commands, used to configure the driver
-before initializing the JTAG scan chain:
-
-@deffn {Config Command} {ft2232_device_desc} description
-Provides the USB device description (the @emph{iProduct string})
-of the FTDI FT2232 device. If not
-specified, the FTDI default value is used. This setting is only valid
-if compiled with FTD2XX support.
-@end deffn
-
-@deffn {Config Command} {ft2232_serial} serial-number
-Specifies the @var{serial-number} of the FTDI FT2232 device to use,
-in case the vendor provides unique IDs and more than one FT2232 device
-is connected to the host.
-If not specified, serial numbers are not considered.
-(Note that USB serial numbers can be arbitrary Unicode strings,
-and are not restricted to containing only decimal digits.)
-@end deffn
-
-@deffn {Config Command} {ft2232_layout} name
-Each vendor's FT2232 device can use different GPIO signals
-to control output-enables, reset signals, and LEDs.
-Currently valid layout @var{name} values include:
-@itemize @minus
-@item @b{axm0432_jtag} Axiom AXM-0432
-@item @b{comstick} Hitex STR9 comstick
-@item @b{cortino} Hitex Cortino JTAG interface
-@item @b{evb_lm3s811} TI/Luminary Micro EVB_LM3S811 as a JTAG interface,
-either for the local Cortex-M3 (SRST only)
-or in a passthrough mode (neither SRST nor TRST)
-This layout can not support the SWO trace mechanism, and should be
-used only for older boards (before rev C).
-@item @b{luminary_icdi} This layout should be used with most TI/Luminary
-eval boards, including Rev C LM3S811 eval boards and the eponymous
-ICDI boards, to debug either the local Cortex-M3 or in passthrough mode
-to debug some other target. It can support the SWO trace mechanism.
-@item @b{flyswatter} Tin Can Tools Flyswatter
-@item @b{icebear} ICEbear JTAG adapter from Section 5
-@item @b{jtagkey} Amontec JTAGkey and JTAGkey-Tiny (and compatibles)
-@item @b{jtagkey2} Amontec JTAGkey2 (and compatibles)
-@item @b{m5960} American Microsystems M5960
-@item @b{olimex-jtag} Olimex ARM-USB-OCD and ARM-USB-Tiny
-@item @b{oocdlink} OOCDLink
-@c oocdlink ~= jtagkey_prototype_v1
-@item @b{redbee-econotag} Integrated with a Redbee development board.
-@item @b{redbee-usb} Integrated with a Redbee USB-stick development board.
-@item @b{sheevaplug} Marvell Sheevaplug development kit
-@item @b{signalyzer} Xverve Signalyzer
-@item @b{stm32stick} Hitex STM32 Performance Stick
-@item @b{turtelizer2} egnite Software turtelizer2
-@item @b{usbjtag} "USBJTAG-1" layout described in the OpenOCD diploma thesis
-@end itemize
-@end deffn
-
-@deffn {Config Command} {ft2232_vid_pid} [vid pid]+
-The vendor ID and product ID of the FTDI FT2232 device. If not specified, the FTDI
-default values are used.
-Currently, up to eight [@var{vid}, @var{pid}] pairs may be given, e.g.
-@example
-ft2232_vid_pid 0x0403 0xcff8 0x15ba 0x0003
-@end example
-@end deffn
-
-@deffn {Config Command} {ft2232_latency} ms
-On some systems using FT2232 based JTAG interfaces the FT_Read function call in
-ft2232_read() fails to return the expected number of bytes. This can be caused by
-USB communication delays and has proved hard to reproduce and debug. Setting the
-FT2232 latency timer to a larger value increases delays for short USB packets but it
-also reduces the risk of timeouts before receiving the expected number of bytes.
-The OpenOCD default value is 2 and for some systems a value of 10 has proved useful.
-@end deffn
-
-@deffn {Config Command} {ft2232_channel} channel
-Used to select the channel of the ft2232 chip to use (between 1 and 4).
-The default value is 1.
-@end deffn
-
-For example, the interface config file for a
-Turtelizer JTAG Adapter looks something like this:
-
-@example
-interface ft2232
-ft2232_device_desc "Turtelizer JTAG/RS232 Adapter"
-ft2232_layout turtelizer2
-ft2232_vid_pid 0x0403 0xbdc8
-@end example
-@end deffn
-
 @deffn {Interface Driver} {ftdi}
 This driver is for adapters using the MPSSE (Multi-Protocol Synchronous Serial
 Engine) mode built into many FTDI chips, such as the FT2232, FT4232 and FT232H.
-It is a complete rewrite to address a large number of problems with the ft2232
-interface driver.
 
 The driver is using libusb-1.0 in asynchronous mode to talk to the FTDI device,
-bypassing intermediate libraries like libftdi of D2XX. Performance-wise it is
-consistently faster than the ft2232 driver, sometimes several times faster.
+bypassing intermediate libraries like libftdi of D2XX.
 
 A major improvement of this driver is that support for new FTDI based adapters
 can be added competely through configuration files, without the need to patch
@@ -9344,16 +9247,6 @@ supply stable enough for the Amontec JTAGkey to be operated.
 
 @b{Laptops running on battery have this problem too...}
 
-@item @b{USB Power} When using the Amontec JTAGkey, sometimes OpenOCD crashes with the
-following error messages: "Error: ft2232.c:201 ft2232_read(): FT_Read returned:
-4" and "Error: ft2232.c:365 ft2232_send_and_recv(): couldn't read from FT2232".
-What does that mean and what might be the reason for this?
-
-First of all, the reason might be the USB power supply. Try using a self-powered
-hub instead of a direct connection to your computer. Secondly, the error code 4
-corresponds to an FT_IO_ERROR, which means that the driver for the FTDI USB
-chip ran into some sort of error - this points us to a USB problem.
-
 @item @b{GDB Disconnects} When using the Amontec JTAGkey, sometimes OpenOCD crashes with the following
 error message: "Error: gdb_server.c:101 gdb_get_char(): read: 10054".
 What does that mean and what might be the reason for this?
index c81c08e..4c4e774 100644 (file)
@@ -60,9 +60,6 @@ endif
 if DUMMY
 DRIVERFILES += dummy.c
 endif
-if FT2232_DRIVER
-DRIVERFILES += ft2232.c
-endif
 if FTDI
 DRIVERFILES += ftdi.c mpsse.c
 endif
diff --git a/src/jtag/drivers/ft2232.c b/src/jtag/drivers/ft2232.c
deleted file mode 100644 (file)
index 621da8e..0000000
+++ /dev/null
@@ -1,4308 +0,0 @@
-/***************************************************************************
-*   Copyright (C) 2009 by Øyvind Harboe                                   *
-*      Øyvind Harboe <oyvind.harboe@zylin.com>                               *
-*                                                                         *
-*   Copyright (C) 2009 by SoftPLC Corporation.  http://softplc.com        *
-*      Dick Hollenbeck <dick@softplc.com>                                    *
-*                                                                         *
-*   Copyright (C) 2004, 2006 by Dominic Rath                              *
-*   Dominic.Rath@gmx.de                                                   *
-*                                                                         *
-*   Copyright (C) 2008 by Spencer Oliver                                  *
-*   spen@spen-soft.co.uk                                                  *
-*                                                                         *
-*   This program is free software; you can redistribute it and/or modify  *
-*   it under the terms of the GNU General Public License as published by  *
-*   the Free Software Foundation; either version 2 of the License, or     *
-*   (at your option) any later version.                                   *
-*                                                                         *
-*   This program is distributed in the hope that it will be useful,       *
-*   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
-*   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
-*   GNU General Public License for more details.                          *
-*                                                                         *
-*   You should have received a copy of the GNU General Public License     *
-*   along with this program.  If not, see <http://www.gnu.org/licenses/>. *
-***************************************************************************/
-
-/**
- * @file
- * JTAG adapters based on the FT2232 full and high speed USB parts are
- * popular low cost JTAG debug solutions.  Many FT2232 based JTAG adapters
- * are discrete, but development boards may integrate them as alternatives
- * to more capable (and expensive) third party JTAG pods.
- *
- * JTAG uses only one of the two communications channels ("MPSSE engines")
- * on these devices.  Adapters based on FT4232 parts have four ports/channels
- * (A/B/C/D), instead of just two (A/B).
- *
- * Especially on development boards integrating one of these chips (as
- * opposed to discrete pods/dongles), the additional channels can be used
- * for a variety of purposes, but OpenOCD only uses one channel at a time.
- *
- *  - As a USB-to-serial adapter for the target's console UART ...
- *    which may be able to support ROM boot loaders that load initial
- *    firmware images to flash (or SRAM).
- *
- *  - On systems which support ARM's SWD in addition to JTAG, or instead
- *    of it, that second port can be used for reading SWV/SWO trace data.
- *
- *  - Additional JTAG links, e.g. to a CPLD or * FPGA.
- *
- * FT2232 based JTAG adapters are "dumb" not "smart", because most JTAG
- * request/response interactions involve round trips over the USB link.
- * A "smart" JTAG adapter has intelligence close to the scan chain, so it
- * can for example poll quickly for a status change (usually taking on the
- * order of microseconds not milliseconds) before beginning a queued
- * transaction which require the previous one to have completed.
- *
- * There are dozens of adapters of this type, differing in details which
- * this driver needs to understand.  Those "layout" details are required
- * as part of FT2232 driver configuration.
- *
- * This code uses information contained in the MPSSE specification which was
- * found here:
- * http://www.ftdichip.com/Documents/AppNotes/AN2232C-01_MPSSE_Cmnd.pdf
- * Hereafter this is called the "MPSSE Spec".
- *
- * The datasheet for the ftdichip.com's FT2232D part is here:
- * http://www.ftdichip.com/Documents/DataSheets/DS_FT2232D.pdf
- *
- * Also note the issue with code 0x4b (clock data to TMS) noted in
- * http://developer.intra2net.com/mailarchive/html/libftdi/2009/msg00292.html
- * which can affect longer JTAG state paths.
- */
-
-#ifdef HAVE_CONFIG_H
-#include "config.h"
-#endif
-
-/* project specific includes */
-#include <jtag/interface.h>
-#include <transport/transport.h>
-#include <helper/time_support.h>
-
-#if IS_CYGWIN == 1
-#include <windows.h>
-#endif
-
-#include <assert.h>
-
-#if (BUILD_FT2232_FTD2XX == 1 && BUILD_FT2232_LIBFTDI == 1)
-#error "BUILD_FT2232_FTD2XX && BUILD_FT2232_LIBFTDI are mutually exclusive"
-#elif (BUILD_FT2232_FTD2XX != 1 && BUILD_FT2232_LIBFTDI != 1)
-#error "BUILD_FT2232_FTD2XX || BUILD_FT2232_LIBFTDI must be chosen"
-#endif
-
-/* FT2232 access library includes */
-#if BUILD_FT2232_FTD2XX == 1
-#include <ftd2xx.h>
-#include "ftd2xx_common.h"
-
-enum ftdi_interface {
-       INTERFACE_ANY = 0,
-       INTERFACE_A   = 1,
-       INTERFACE_B   = 2,
-       INTERFACE_C   = 3,
-       INTERFACE_D   = 4
-};
-
-#elif BUILD_FT2232_LIBFTDI == 1
-#include <ftdi.h>
-#endif
-
-/* max TCK for the high speed devices 30000 kHz */
-#define        FTDI_x232H_MAX_TCK      30000
-/* max TCK for the full speed devices 6000 kHz */
-#define FTDI_2232C_MAX_TCK 6000
-/* this speed value tells that RTCK is requested */
-#define RTCK_SPEED -1
-
-/*
- * On my Athlon XP 1900+ EHCI host with FT2232H JTAG dongle I get read timeout
- * errors with a retry count of 100. Increasing it solves the problem for me.
- *     - Dimitar
- *
- * FIXME There's likely an issue with the usb_read_timeout from libftdi.
- * Fix that (libusb? kernel? libftdi? here?) and restore the retry count
- * to something sane.
- */
-#define LIBFTDI_READ_RETRY_COUNT               2000
-
-#ifndef BUILD_FT2232_HIGHSPEED
- #if BUILD_FT2232_FTD2XX == 1
-       enum { FT_DEVICE_2232H = 6, FT_DEVICE_4232H, FT_DEVICE_232H };
- #elif BUILD_FT2232_LIBFTDI == 1
-       enum ftdi_chip_type { TYPE_2232H = 4, TYPE_4232H = 5, TYPE_232H = 6 };
- #endif
-#endif
-
-/**
- * Send out \a num_cycles on the TCK line while the TAP(s) are in a
- * stable state.  Calling code must ensure that current state is stable,
- * that verification is not done in here.
- *
- * @param num_cycles The number of clocks cycles to send.
- * @param cmd The command to send.
- *
- * @returns ERROR_OK on success, or ERROR_JTAG_QUEUE_FAILED on failure.
- */
-static int ft2232_stableclocks(int num_cycles, struct jtag_command *cmd);
-
-static char *ft2232_device_desc_A;
-static char *ft2232_device_desc;
-static char *ft2232_serial;
-static uint8_t ft2232_latency = 2;
-static unsigned ft2232_max_tck = FTDI_2232C_MAX_TCK;
-static int ft2232_channel = INTERFACE_ANY;
-
-#define MAX_USB_IDS 8
-/* vid = pid = 0 marks the end of the list */
-static uint16_t ft2232_vid[MAX_USB_IDS + 1] = { 0x0403, 0 };
-static uint16_t ft2232_pid[MAX_USB_IDS + 1] = { 0x6010, 0 };
-
-struct ft2232_layout {
-       const char *name;
-       int (*init)(void);
-       void (*reset)(int trst, int srst);
-       void (*blink)(void);
-       int channel;
-};
-
-/* init procedures for supported layouts */
-static int usbjtag_init(void);
-static int jtagkey_init(void);
-static int lm3s811_jtag_init(void);
-static int icdi_jtag_init(void);
-static int olimex_jtag_init(void);
-static int flyswatter1_init(void);
-static int flyswatter2_init(void);
-static int minimodule_init(void);
-static int turtle_init(void);
-static int comstick_init(void);
-static int stm32stick_init(void);
-static int axm0432_jtag_init(void);
-static int sheevaplug_init(void);
-static int icebear_jtag_init(void);
-static int cortino_jtag_init(void);
-static int signalyzer_init(void);
-static int signalyzer_h_init(void);
-static int ktlink_init(void);
-static int redbee_init(void);
-static int lisa_l_init(void);
-static int flossjtag_init(void);
-static int xds100v2_init(void);
-static int digilent_hs1_init(void);
-
-/* reset procedures for supported layouts */
-static void ftx23_reset(int trst, int srst);
-static void jtagkey_reset(int trst, int srst);
-static void olimex_jtag_reset(int trst, int srst);
-static void flyswatter1_reset(int trst, int srst);
-static void flyswatter2_reset(int trst, int srst);
-static void minimodule_reset(int trst, int srst);
-static void turtle_reset(int trst, int srst);
-static void comstick_reset(int trst, int srst);
-static void stm32stick_reset(int trst, int srst);
-static void axm0432_jtag_reset(int trst, int srst);
-static void sheevaplug_reset(int trst, int srst);
-static void icebear_jtag_reset(int trst, int srst);
-static void signalyzer_h_reset(int trst, int srst);
-static void ktlink_reset(int trst, int srst);
-static void redbee_reset(int trst, int srst);
-static void xds100v2_reset(int trst, int srst);
-static void digilent_hs1_reset(int trst, int srst);
-
-/* blink procedures for layouts that support a blinking led */
-static void olimex_jtag_blink(void);
-static void flyswatter1_jtag_blink(void);
-static void flyswatter2_jtag_blink(void);
-static void turtle_jtag_blink(void);
-static void signalyzer_h_blink(void);
-static void ktlink_blink(void);
-static void lisa_l_blink(void);
-static void flossjtag_blink(void);
-
-/* common transport support options */
-
-/* static const char *jtag_and_swd[] = { "jtag", "swd", NULL }; */
-
-static const struct ft2232_layout  ft2232_layouts[] = {
-       { .name = "usbjtag",
-               .init = usbjtag_init,
-               .reset = ftx23_reset,
-       },
-       { .name = "jtagkey",
-               .init = jtagkey_init,
-               .reset = jtagkey_reset,
-       },
-       { .name = "jtagkey_prototype_v1",
-               .init = jtagkey_init,
-               .reset = jtagkey_reset,
-       },
-       { .name = "oocdlink",
-               .init = jtagkey_init,
-               .reset = jtagkey_reset,
-       },
-       { .name = "signalyzer",
-               .init = signalyzer_init,
-               .reset = ftx23_reset,
-       },
-       { .name = "evb_lm3s811",
-               .init = lm3s811_jtag_init,
-               .reset = ftx23_reset,
-       },
-       { .name = "luminary_icdi",
-               .init = icdi_jtag_init,
-               .reset = ftx23_reset,
-       },
-       { .name = "olimex-jtag",
-               .init = olimex_jtag_init,
-               .reset = olimex_jtag_reset,
-               .blink = olimex_jtag_blink
-       },
-       { .name = "flyswatter",
-               .init = flyswatter1_init,
-               .reset = flyswatter1_reset,
-               .blink = flyswatter1_jtag_blink
-       },
-       { .name = "flyswatter2",
-               .init = flyswatter2_init,
-               .reset = flyswatter2_reset,
-               .blink = flyswatter2_jtag_blink
-       },
-       { .name = "minimodule",
-               .init = minimodule_init,
-               .reset = minimodule_reset,
-       },
-       { .name = "turtelizer2",
-               .init = turtle_init,
-               .reset = turtle_reset,
-               .blink = turtle_jtag_blink
-       },
-       { .name = "comstick",
-               .init = comstick_init,
-               .reset = comstick_reset,
-       },
-       { .name = "stm32stick",
-               .init = stm32stick_init,
-               .reset = stm32stick_reset,
-       },
-       { .name = "axm0432_jtag",
-               .init = axm0432_jtag_init,
-               .reset = axm0432_jtag_reset,
-       },
-       { .name = "sheevaplug",
-               .init = sheevaplug_init,
-               .reset = sheevaplug_reset,
-       },
-       { .name = "icebear",
-               .init = icebear_jtag_init,
-               .reset = icebear_jtag_reset,
-       },
-       { .name = "cortino",
-               .init = cortino_jtag_init,
-               .reset = comstick_reset,
-       },
-       { .name = "signalyzer-h",
-               .init = signalyzer_h_init,
-               .reset = signalyzer_h_reset,
-               .blink = signalyzer_h_blink
-       },
-       { .name = "ktlink",
-               .init = ktlink_init,
-               .reset = ktlink_reset,
-               .blink = ktlink_blink
-       },
-       { .name = "redbee-econotag",
-               .init = redbee_init,
-               .reset = redbee_reset,
-       },
-       { .name = "redbee-usb",
-               .init = redbee_init,
-               .reset = redbee_reset,
-               .channel = INTERFACE_B,
-       },
-       { .name = "lisa-l",
-               .init = lisa_l_init,
-               .reset = ftx23_reset,
-               .blink = lisa_l_blink,
-               .channel = INTERFACE_B,
-       },
-       { .name = "flossjtag",
-               .init = flossjtag_init,
-               .reset = ftx23_reset,
-               .blink = flossjtag_blink,
-       },
-       { .name = "xds100v2",
-               .init = xds100v2_init,
-               .reset = xds100v2_reset,
-       },
-       { .name = "digilent-hs1",
-               .init = digilent_hs1_init,
-               .reset = digilent_hs1_reset,
-               .channel = INTERFACE_A,
-       },
-       { .name = NULL, /* END OF TABLE */ },
-};
-
-/* bitmask used to drive nTRST; usually a GPIOLx signal */
-static uint8_t nTRST;
-static uint8_t nTRSTnOE;
-/* bitmask used to drive nSRST; usually a GPIOLx signal */
-static uint8_t nSRST;
-static uint8_t nSRSTnOE;
-
-/** the layout being used with this debug session */
-static const struct ft2232_layout *layout;
-
-/** default bitmask values driven on DBUS: TCK/TDI/TDO/TMS and GPIOL(0..4) */
-static uint8_t low_output;
-
-/* note that direction bit == 1 means that signal is an output */
-
-/** default direction bitmask for DBUS: TCK/TDI/TDO/TMS and GPIOL(0..4) */
-static uint8_t low_direction;
-/** default value bitmask for CBUS GPIOH(0..4) */
-static uint8_t high_output;
-/** default direction bitmask for CBUS GPIOH(0..4) */
-static uint8_t high_direction;
-
-#if BUILD_FT2232_FTD2XX == 1
-static FT_HANDLE ftdih;
-static FT_DEVICE ftdi_device;
-#elif BUILD_FT2232_LIBFTDI == 1
-static struct ftdi_context ftdic;
-static enum ftdi_chip_type ftdi_device;
-#endif
-
-static struct jtag_command *first_unsent;      /* next command that has to be sent */
-static int require_send;
-
-/*     http://urjtag.wiki.sourceforge.net/Cable + FT2232 says:
-
-       "There is a significant difference between libftdi and libftd2xx. The latter
-       one allows to schedule up to 64*64 bytes of result data while libftdi fails
-       with more than 4*64. As a consequence, the FT2232 driver is forced to
-       perform around 16x more USB transactions for long command streams with TDO
-       capture when running with libftdi."
-
-       No idea how we get
-       #define FT2232_BUFFER_SIZE 131072
-       a comment would have been nice.
-*/
-
-#if BUILD_FT2232_FTD2XX == 1
-#define FT2232_BUFFER_READ_QUEUE_SIZE (64*64)
-#else
-#define FT2232_BUFFER_READ_QUEUE_SIZE (64*4)
-#endif
-
-#define FT2232_BUFFER_SIZE 131072
-
-static uint8_t *ft2232_buffer;
-static int ft2232_buffer_size;
-static int ft2232_read_pointer;
-static int ft2232_expect_read;
-
-/**
- * Function buffer_write
- * writes a byte into the byte buffer, "ft2232_buffer", which must be sent later.
- * @param val is the byte to send.
- */
-static inline void buffer_write(uint8_t val)
-{
-       assert(ft2232_buffer);
-       assert((unsigned) ft2232_buffer_size < (unsigned) FT2232_BUFFER_SIZE);
-       ft2232_buffer[ft2232_buffer_size++] = val;
-}
-
-/**
- * Function buffer_read
- * returns a byte from the byte buffer.
- */
-static inline uint8_t buffer_read(void)
-{
-       assert(ft2232_buffer);
-       assert(ft2232_read_pointer < ft2232_buffer_size);
-       return ft2232_buffer[ft2232_read_pointer++];
-}
-
-/**
- * Clocks out \a bit_count bits on the TMS line, starting with the least
- * significant bit of tms_bits and progressing to more significant bits.
- * Rigorous state transition logging is done here via tap_set_state().
- *
- * @param mpsse_cmd One of the MPSSE TMS oriented commands such as
- *     0x4b or 0x6b.  See the MPSSE spec referenced above for their
- *     functionality. The MPSSE command "Clock Data to TMS/CS Pin (no Read)"
- *     is often used for this, 0x4b.
- *
- * @param tms_bits Holds the sequence of bits to send.
- * @param tms_count Tells how many bits in the sequence.
- * @param tdi_bit A single bit to pass on to TDI before the first TCK
- *     cycle and held static for the duration of TMS clocking.
- *
- * See the MPSSE spec referenced above.
- */
-static void clock_tms(uint8_t mpsse_cmd, int tms_bits, int tms_count, bool tdi_bit)
-{
-       uint8_t tms_byte;
-       int i;
-       int tms_ndx;    /* bit index into tms_byte */
-
-       assert(tms_count > 0);
-
-       DEBUG_JTAG_IO("mpsse cmd=%02x, tms_bits = 0x%08x, bit_count=%d",
-               mpsse_cmd, tms_bits, tms_count);
-
-       for (tms_byte = tms_ndx = i = 0; i < tms_count; ++i, tms_bits >>= 1) {
-               bool bit = tms_bits & 1;
-
-               if (bit)
-                       tms_byte |= (1 << tms_ndx);
-
-               /* always do state transitions in public view */
-               tap_set_state(tap_state_transition(tap_get_state(), bit));
-
-               /*      we wrote a bit to tms_byte just above, increment bit index.  if bit was zero
-                * also increment.
-               */
-               ++tms_ndx;
-
-               if (tms_ndx == 7 || i == tms_count-1) {
-                       buffer_write(mpsse_cmd);
-                       buffer_write(tms_ndx - 1);
-
-                       /*      Bit 7 of the byte is passed on to TDI/DO before the first TCK/SK of
-                        * TMS/CS and is held static for the duration of TMS/CS clocking.
-                       */
-                       buffer_write(tms_byte | (tdi_bit << 7));
-               }
-       }
-}
-
-/**
- * Function get_tms_buffer_requirements
- * returns what clock_tms() will consume if called with
- * same \a bit_count.
- */
-static inline int get_tms_buffer_requirements(int bit_count)
-{
-       return ((bit_count + 6)/7) * 3;
-}
-
-/**
- * Function move_to_state
- * moves the TAP controller from the current state to a
- * \a goal_state through a path given by tap_get_tms_path().  State transition
- * logging is performed by delegation to clock_tms().
- *
- * @param goal_state is the destination state for the move.
- */
-static void move_to_state(tap_state_t goal_state)
-{
-       tap_state_t start_state = tap_get_state();
-
-       /*      goal_state is 1/2 of a tuple/pair of states which allow convenient
-        * lookup of the required TMS pattern to move to this state from the start state.
-       */
-
-       /* do the 2 lookups */
-       int tms_bits  = tap_get_tms_path(start_state, goal_state);
-       int tms_count = tap_get_tms_path_len(start_state, goal_state);
-
-       DEBUG_JTAG_IO("start=%s goal=%s", tap_state_name(start_state), tap_state_name(goal_state));
-
-       clock_tms(0x4b,  tms_bits, tms_count, 0);
-}
-
-static int ft2232_write(uint8_t *buf, int size, uint32_t *bytes_written)
-{
-#if BUILD_FT2232_FTD2XX == 1
-       FT_STATUS status;
-       DWORD dw_bytes_written = 0;
-       status = FT_Write(ftdih, buf, size, &dw_bytes_written);
-       if (status != FT_OK) {
-               *bytes_written = dw_bytes_written;
-               LOG_ERROR("FT_Write returned: %s", ftd2xx_status_string(status));
-               return ERROR_JTAG_DEVICE_ERROR;
-       } else
-               *bytes_written = dw_bytes_written;
-
-#elif BUILD_FT2232_LIBFTDI == 1
-       int retval = ftdi_write_data(&ftdic, buf, size);
-       if (retval < 0) {
-               *bytes_written = 0;
-               LOG_ERROR("ftdi_write_data: %s", ftdi_get_error_string(&ftdic));
-               return ERROR_JTAG_DEVICE_ERROR;
-       } else
-               *bytes_written = retval;
-
-#endif
-
-       if (*bytes_written != (uint32_t)size)
-               return ERROR_JTAG_DEVICE_ERROR;
-
-       return ERROR_OK;
-}
-
-static int ft2232_read(uint8_t *buf, uint32_t size, uint32_t *bytes_read)
-{
-#if BUILD_FT2232_FTD2XX == 1
-       DWORD dw_bytes_read;
-       FT_STATUS status;
-       int timeout = 5;
-       *bytes_read = 0;
-
-       while ((*bytes_read < size) && timeout--) {
-               status = FT_Read(ftdih, buf + *bytes_read, size -
-                               *bytes_read, &dw_bytes_read);
-               if (status != FT_OK) {
-                       *bytes_read = 0;
-                       LOG_ERROR("FT_Read returned: %s", ftd2xx_status_string(status));
-                       return ERROR_JTAG_DEVICE_ERROR;
-               }
-               *bytes_read += dw_bytes_read;
-       }
-
-#elif BUILD_FT2232_LIBFTDI == 1
-       int retval;
-       int timeout = LIBFTDI_READ_RETRY_COUNT;
-       *bytes_read = 0;
-
-       while ((*bytes_read < size) && timeout--) {
-               retval = ftdi_read_data(&ftdic, buf + *bytes_read, size - *bytes_read);
-               if (retval < 0) {
-                       *bytes_read = 0;
-                       LOG_ERROR("ftdi_read_data: %s", ftdi_get_error_string(&ftdic));
-                       return ERROR_JTAG_DEVICE_ERROR;
-               }
-               *bytes_read += retval;
-       }
-
-#endif
-
-       if (*bytes_read < size) {
-               LOG_ERROR("couldn't read enough bytes from "
-                       "FT2232 device (%i < %i)",
-                       (unsigned)*bytes_read,
-                       (unsigned)size);
-               return ERROR_JTAG_DEVICE_ERROR;
-       }
-
-       return ERROR_OK;
-}
-
-static bool ft2232_device_is_highspeed(void)
-{
-#if BUILD_FT2232_FTD2XX == 1
-       return (ftdi_device == FT_DEVICE_2232H) || (ftdi_device == FT_DEVICE_4232H)
- #ifdef HAS_ENUM_FT232H
-               || (ftdi_device == FT_DEVICE_232H)
- #endif
-       ;
-#elif BUILD_FT2232_LIBFTDI == 1
-       return (ftdi_device == TYPE_2232H || ftdi_device == TYPE_4232H
- #ifdef HAS_ENUM_FT232H
-               || ftdi_device == TYPE_232H
- #endif
-       );
-#endif
-}
-
-/*
- * Commands that only apply to the highspeed FTx232H devices (FT2232H, FT4232H, FT232H).
- * See chapter 6 in http://www.ftdichip.com/Documents/AppNotes/
- * AN_108_Command_Processor_for_MPSSE_and_MCU_Host_Bus_Emulation_Modes.pdf
- */
-
-static int ftx232h_adaptive_clocking(bool enable)
-{
-       uint8_t buf = enable ? 0x96 : 0x97;
-       LOG_DEBUG("%2.2x", buf);
-
-       uint32_t bytes_written;
-       int retval;
-
-       retval = ft2232_write(&buf, sizeof(buf), &bytes_written);
-       if (retval != ERROR_OK) {
-               LOG_ERROR("couldn't write command to %s adaptive clocking"
-                       , enable ? "enable" : "disable");
-               return retval;
-       }
-
-       return ERROR_OK;
-}
-
-/**
- * Enable/disable the clk divide by 5 of the 60MHz master clock.
- * This result in a JTAG clock speed range of 91.553Hz-6MHz
- * respective 457.763Hz-30MHz.
- */
-static int ftx232h_clk_divide_by_5(bool enable)
-{
-       uint32_t bytes_written;
-       uint8_t buf = enable ?  0x8b : 0x8a;
-
-       if (ft2232_write(&buf, sizeof(buf), &bytes_written) != ERROR_OK) {
-               LOG_ERROR("couldn't write command to %s clk divide by 5"
-                       , enable ? "enable" : "disable");
-               return ERROR_JTAG_INIT_FAILED;
-       }
-       ft2232_max_tck = enable ? FTDI_2232C_MAX_TCK : FTDI_x232H_MAX_TCK;
-       LOG_INFO("max TCK change to: %u kHz", ft2232_max_tck);
-
-       return ERROR_OK;
-}
-
-static int ft2232_speed(int speed)
-{
-       uint8_t buf[3];
-       int retval;
-       uint32_t bytes_written;
-
-       retval = ERROR_OK;
-       bool enable_adaptive_clocking = (RTCK_SPEED == speed);
-       if (ft2232_device_is_highspeed())
-               retval = ftx232h_adaptive_clocking(enable_adaptive_clocking);
-       else if (enable_adaptive_clocking) {
-               LOG_ERROR("ft2232 device %lu does not support RTCK"
-                       , (long unsigned int)ftdi_device);
-               return ERROR_FAIL;
-       }
-
-       if ((enable_adaptive_clocking) || (ERROR_OK != retval))
-               return retval;
-
-       buf[0] = 0x86;                                  /* command "set divisor" */
-       buf[1] = speed & 0xff;                  /* valueL (0 = 6MHz, 1 = 3MHz, 2 = 2.0MHz, ...*/
-       buf[2] = (speed >> 8) & 0xff;   /* valueH */
-
-       LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]);
-       retval = ft2232_write(buf, sizeof(buf), &bytes_written);
-       if (retval != ERROR_OK) {
-               LOG_ERROR("couldn't set FT2232 TCK speed");
-               return retval;
-       }
-
-       return ERROR_OK;
-}
-
-static int ft2232_speed_div(int speed, int *khz)
-{
-       /* Take a look in the FT2232 manual,
-        * AN2232C-01 Command Processor for
-        * MPSSE and MCU Host Bus. Chapter 3.8 */
-
-       *khz = (RTCK_SPEED == speed) ? 0 : ft2232_max_tck / (1 + speed);
-
-       return ERROR_OK;
-}
-
-static int ft2232_khz(int khz, int *jtag_speed)
-{
-       if (khz == 0) {
-               if (ft2232_device_is_highspeed()) {
-                       *jtag_speed = RTCK_SPEED;
-                       return ERROR_OK;
-               } else {
-                       LOG_DEBUG("RCLK not supported");
-                       return ERROR_FAIL;
-               }
-       }
-
-       /* Take a look in the FT2232 manual,
-        * AN2232C-01 Command Processor for
-        * MPSSE and MCU Host Bus. Chapter 3.8
-        *
-        * We will calc here with a multiplier
-        * of 10 for better rounding later. */
-
-       /* Calc speed, (ft2232_max_tck / khz) - 1
-        * Use 65000 for better rounding */
-       *jtag_speed = ((ft2232_max_tck*10) / khz) - 10;
-
-       /* Add 0.9 for rounding */
-       *jtag_speed += 9;
-
-       /* Calc real speed */
-       *jtag_speed = *jtag_speed / 10;
-
-       /* Check if speed is greater than 0 */
-       if (*jtag_speed < 0)
-               *jtag_speed = 0;
-
-       /* Check max value */
-       if (*jtag_speed > 0xFFFF)
-               *jtag_speed = 0xFFFF;
-
-       return ERROR_OK;
-}
-
-static void ft2232_end_state(tap_state_t state)
-{
-       if (tap_is_state_stable(state))
-               tap_set_end_state(state);
-       else {
-               LOG_ERROR("BUG: %s is not a stable end state", tap_state_name(state));
-               exit(-1);
-       }
-}
-
-static void ft2232_read_scan(enum scan_type type, uint8_t *buffer, int scan_size)
-{
-       int num_bytes = (scan_size + 7) / 8;
-       int bits_left = scan_size;
-       int cur_byte  = 0;
-
-       while (num_bytes-- > 1) {
-               buffer[cur_byte++] = buffer_read();
-               bits_left -= 8;
-       }
-
-       buffer[cur_byte] = 0x0;
-
-       /* There is one more partial byte left from the clock data in/out instructions */
-       if (bits_left > 1)
-               buffer[cur_byte] = buffer_read() >> 1;
-       /* This shift depends on the length of the
-        *clock data to tms instruction, insterted
-        *at end of the scan, now fixed to a two
-        *step transition in ft2232_add_scan */
-       buffer[cur_byte] = (buffer[cur_byte] | (((buffer_read()) << 1) & 0x80)) >> (8 - bits_left);
-}
-
-static void ft2232_debug_dump_buffer(void)
-{
-       int i;
-       char line[256];
-       char *line_p = line;
-
-       for (i = 0; i < ft2232_buffer_size; i++) {
-               line_p += snprintf(line_p,
-                               sizeof(line) - (line_p - line),
-                               "%2.2x ",
-                               ft2232_buffer[i]);
-               if (i % 16 == 15) {
-                       LOG_DEBUG("%s", line);
-                       line_p = line;
-               }
-       }
-
-       if (line_p != line)
-               LOG_DEBUG("%s", line);
-}
-
-static int ft2232_send_and_recv(struct jtag_command *first, struct jtag_command *last)
-{
-       struct jtag_command *cmd;
-       uint8_t *buffer;
-       int scan_size;
-       enum scan_type type;
-       int retval;
-       uint32_t bytes_written = 0;
-       uint32_t bytes_read = 0;
-
-#ifdef _DEBUG_USB_IO_
-       struct timeval start, inter, inter2, end;
-       struct timeval d_inter, d_inter2, d_end;
-#endif
-
-#ifdef _DEBUG_USB_COMMS_
-       LOG_DEBUG("write buffer (size %i):", ft2232_buffer_size);
-       ft2232_debug_dump_buffer();
-#endif
-
-#ifdef _DEBUG_USB_IO_
-       gettimeofday(&start, NULL);
-#endif
-
-       retval = ft2232_write(ft2232_buffer, ft2232_buffer_size, &bytes_written);
-       if (retval != ERROR_OK) {
-               LOG_ERROR("couldn't write MPSSE commands to FT2232");
-               return retval;
-       }
-
-#ifdef _DEBUG_USB_IO_
-       gettimeofday(&inter, NULL);
-#endif
-
-       if (ft2232_expect_read) {
-               /* FIXME this "timeout" is never changed ... */
-               int timeout = LIBFTDI_READ_RETRY_COUNT;
-               ft2232_buffer_size = 0;
-
-#ifdef _DEBUG_USB_IO_
-               gettimeofday(&inter2, NULL);
-#endif
-
-               retval = ft2232_read(ft2232_buffer, ft2232_expect_read, &bytes_read);
-               if (retval != ERROR_OK) {
-                       LOG_ERROR("couldn't read from FT2232");
-                       return retval;
-               }
-
-#ifdef _DEBUG_USB_IO_
-               gettimeofday(&end, NULL);
-
-               timeval_subtract(&d_inter, &inter, &start);
-               timeval_subtract(&d_inter2, &inter2, &start);
-               timeval_subtract(&d_end, &end, &start);
-
-               LOG_INFO("inter: %u.%06u, inter2: %u.%06u end: %u.%06u",
-                       (unsigned)d_inter.tv_sec, (unsigned)d_inter.tv_usec,
-                       (unsigned)d_inter2.tv_sec, (unsigned)d_inter2.tv_usec,
-                       (unsigned)d_end.tv_sec, (unsigned)d_end.tv_usec);
-#endif
-
-               ft2232_buffer_size = bytes_read;
-
-               if (ft2232_expect_read != ft2232_buffer_size) {
-                       LOG_ERROR("ft2232_expect_read (%i) != "
-                               "ft2232_buffer_size (%i) "
-                               "(%i retries)",
-                               ft2232_expect_read,
-                               ft2232_buffer_size,
-                               LIBFTDI_READ_RETRY_COUNT - timeout);
-                       ft2232_debug_dump_buffer();
-
-                       exit(-1);
-               }
-
-#ifdef _DEBUG_USB_COMMS_
-               LOG_DEBUG("read buffer (%i retries): %i bytes",
-                       LIBFTDI_READ_RETRY_COUNT - timeout,
-                       ft2232_buffer_size);
-               ft2232_debug_dump_buffer();
-#endif
-       }
-
-       ft2232_expect_read  = 0;
-       ft2232_read_pointer = 0;
-
-       /* return ERROR_OK, unless a jtag_read_buffer returns a failed check
-        * that wasn't handled by a caller-provided error handler
-        */
-       retval = ERROR_OK;
-
-       cmd = first;
-       while (cmd != last) {
-               switch (cmd->type) {
-                       case JTAG_SCAN:
-                               type = jtag_scan_type(cmd->cmd.scan);
-                               if (type != SCAN_OUT) {
-                                       scan_size = jtag_scan_size(cmd->cmd.scan);
-                                       buffer = calloc(DIV_ROUND_UP(scan_size, 8), 1);
-                                       ft2232_read_scan(type, buffer, scan_size);
-                                       if (jtag_read_buffer(buffer, cmd->cmd.scan) != ERROR_OK)
-                                               retval = ERROR_JTAG_QUEUE_FAILED;
-                                       free(buffer);
-                               }
-                               break;
-
-                       default:
-                               break;
-               }
-
-               cmd = cmd->next;
-       }
-
-       ft2232_buffer_size = 0;
-
-       return retval;
-}
-
-/**
- * Function ft2232_add_pathmove
- * moves the TAP controller from the current state to a new state through the
- * given path, where path is an array of tap_state_t's.
- *
- * @param path is an array of tap_stat_t which gives the states to traverse through
- *   ending with the last state at path[num_states-1]
- * @param num_states is the count of state steps to move through
- */
-static void ft2232_add_pathmove(tap_state_t *path, int num_states)
-{
-       int state_count = 0;
-
-       assert((unsigned) num_states <= 32u);           /* tms_bits only holds 32 bits */
-
-       DEBUG_JTAG_IO("-");
-
-       /* this loop verifies that the path is legal and logs each state in the path */
-       while (num_states) {
-               unsigned char tms_byte = 0;             /* zero this on each MPSSE batch */
-               int bit_count = 0;
-               int num_states_batch = num_states > 7 ? 7 : num_states;
-
-               /* command "Clock Data to TMS/CS Pin (no Read)" */
-               buffer_write(0x4b);
-
-               /* number of states remaining */
-               buffer_write(num_states_batch - 1);
-
-               while (num_states_batch--) {
-                       /* either TMS=0 or TMS=1 must work ... */
-                       if (tap_state_transition(tap_get_state(), false) == path[state_count])
-                               buf_set_u32(&tms_byte, bit_count++, 1, 0x0);
-                       else if (tap_state_transition(tap_get_state(), true) == path[state_count])
-                               buf_set_u32(&tms_byte, bit_count++, 1, 0x1);
-
-                       /* ... or else the caller goofed BADLY */
-                       else {
-                               LOG_ERROR("BUG: %s -> %s isn't a valid "
-                                       "TAP state transition",
-                                       tap_state_name(tap_get_state()),
-                                       tap_state_name(path[state_count]));
-                               exit(-1);
-                       }
-
-                       tap_set_state(path[state_count]);
-                       state_count++;
-                       num_states--;
-               }
-
-               buffer_write(tms_byte);
-       }
-       tap_set_end_state(tap_get_state());
-}
-
-static void ft2232_add_scan(bool ir_scan, enum scan_type type, uint8_t *buffer, int scan_size)
-{
-       int num_bytes = (scan_size + 7) / 8;
-       int bits_left = scan_size;
-       int cur_byte  = 0;
-       int last_bit;
-
-       if (!ir_scan) {
-               if (tap_get_state() != TAP_DRSHIFT)
-                       move_to_state(TAP_DRSHIFT);
-       } else {
-               if (tap_get_state() != TAP_IRSHIFT)
-                       move_to_state(TAP_IRSHIFT);
-       }
-
-       /* add command for complete bytes */
-       while (num_bytes > 1) {
-               int thisrun_bytes;
-               if (type == SCAN_IO) {
-                       /* Clock Data Bytes In and Out LSB First */
-                       buffer_write(0x39);
-                       /* LOG_DEBUG("added TDI bytes (io %i)", num_bytes); */
-               } else if (type == SCAN_OUT) {
-                       /* Clock Data Bytes Out on -ve Clock Edge LSB First (no Read) */
-                       buffer_write(0x19);
-                       /* LOG_DEBUG("added TDI bytes (o)"); */
-               } else if (type == SCAN_IN) {
-                       /* Clock Data Bytes In on +ve Clock Edge LSB First (no Write) */
-                       buffer_write(0x28);
-                       /* LOG_DEBUG("added TDI bytes (i %i)", num_bytes); */
-               }
-
-               thisrun_bytes = (num_bytes > 65537) ? 65536 : (num_bytes - 1);
-               num_bytes -= thisrun_bytes;
-
-               buffer_write((uint8_t) (thisrun_bytes - 1));
-               buffer_write((uint8_t) ((thisrun_bytes - 1) >> 8));
-
-               if (type != SCAN_IN) {
-                       /* add complete bytes */
-                       while (thisrun_bytes-- > 0) {
-                               buffer_write(buffer[cur_byte++]);
-                               bits_left -= 8;
-                       }
-               } else /* (type == SCAN_IN) */
-                       bits_left -= 8 * (thisrun_bytes);
-       }
-
-       /* the most signifcant bit is scanned during TAP movement */
-       if (type != SCAN_IN)
-               last_bit = (buffer[cur_byte] >> (bits_left - 1)) & 0x1;
-       else
-               last_bit = 0;
-
-       /* process remaining bits but the last one */
-       if (bits_left > 1) {
-               if (type == SCAN_IO) {
-                       /* Clock Data Bits In and Out LSB First */
-                       buffer_write(0x3b);
-                       /* LOG_DEBUG("added TDI bits (io) %i", bits_left - 1); */
-               } else if (type == SCAN_OUT) {
-                       /* Clock Data Bits Out on -ve Clock Edge LSB First (no Read) */
-                       buffer_write(0x1b);
-                       /* LOG_DEBUG("added TDI bits (o)"); */
-               } else if (type == SCAN_IN) {
-                       /* Clock Data Bits In on +ve Clock Edge LSB First (no Write) */
-                       buffer_write(0x2a);
-                       /* LOG_DEBUG("added TDI bits (i %i)", bits_left - 1); */
-               }
-
-               buffer_write(bits_left - 2);
-               if (type != SCAN_IN)
-                       buffer_write(buffer[cur_byte]);
-       }
-
-       if ((ir_scan && (tap_get_end_state() == TAP_IRSHIFT))
-                       || (!ir_scan && (tap_get_end_state() == TAP_DRSHIFT))) {
-               if (type == SCAN_IO) {
-                       /* Clock Data Bits In and Out LSB First */
-                       buffer_write(0x3b);
-                       /* LOG_DEBUG("added TDI bits (io) %i", bits_left - 1); */
-               } else if (type == SCAN_OUT) {
-                       /* Clock Data Bits Out on -ve Clock Edge LSB First (no Read) */
-                       buffer_write(0x1b);
-                       /* LOG_DEBUG("added TDI bits (o)"); */
-               } else if (type == SCAN_IN) {
-                       /* Clock Data Bits In on +ve Clock Edge LSB First (no Write) */
-                       buffer_write(0x2a);
-                       /* LOG_DEBUG("added TDI bits (i %i)", bits_left - 1); */
-               }
-               buffer_write(0x0);
-               if (type != SCAN_IN)
-                       buffer_write(last_bit);
-       } else {
-               int tms_bits;
-               int tms_count;
-               uint8_t mpsse_cmd;
-
-               /* move from Shift-IR/DR to end state */
-               if (type != SCAN_OUT) {
-                       /* We always go to the PAUSE state in two step at the end of an IN or IO
-                        *scan
-                        * This must be coordinated with the bit shifts in ft2232_read_scan    */
-                       tms_bits  = 0x01;
-                       tms_count = 2;
-                       /* Clock Data to TMS/CS Pin with Read */
-                       mpsse_cmd = 0x6b;
-               } else {
-                       tms_bits  = tap_get_tms_path(tap_get_state(), tap_get_end_state());
-                       tms_count = tap_get_tms_path_len(tap_get_state(), tap_get_end_state());
-                       /* Clock Data to TMS/CS Pin (no Read) */
-                       mpsse_cmd = 0x4b;
-               }
-
-               DEBUG_JTAG_IO("finish %s", (type == SCAN_OUT) ? "without read" : "via PAUSE");
-               clock_tms(mpsse_cmd, tms_bits, tms_count, last_bit);
-       }
-
-       if (tap_get_state() != tap_get_end_state())
-               move_to_state(tap_get_end_state());
-}
-
-static int ft2232_large_scan(struct scan_command *cmd,
-       enum scan_type type,
-       uint8_t *buffer,
-       int scan_size)
-{
-       int num_bytes = (scan_size + 7) / 8;
-       int bits_left = scan_size;
-       int cur_byte  = 0;
-       int last_bit;
-       uint8_t *receive_buffer  = malloc(DIV_ROUND_UP(scan_size, 8));
-       uint8_t *receive_pointer = receive_buffer;
-       uint32_t bytes_written;
-       uint32_t bytes_read;
-       int retval;
-       int thisrun_read = 0;
-
-       if (!receive_buffer) {
-               LOG_ERROR("failed to allocate memory");
-               exit(-1);
-       }
-
-       if (cmd->ir_scan) {
-               LOG_ERROR("BUG: large IR scans are not supported");
-               exit(-1);
-       }
-
-       if (tap_get_state() != TAP_DRSHIFT)
-               move_to_state(TAP_DRSHIFT);
-
-       retval = ft2232_write(ft2232_buffer, ft2232_buffer_size, &bytes_written);
-       if (retval != ERROR_OK) {
-               LOG_ERROR("couldn't write MPSSE commands to FT2232");
-               exit(-1);
-       }
-       LOG_DEBUG("ft2232_buffer_size: %i, bytes_written: %i",
-               ft2232_buffer_size, (int)bytes_written);
-       ft2232_buffer_size = 0;
-
-       /* add command for complete bytes */
-       while (num_bytes > 1) {
-               int thisrun_bytes;
-
-               if (type == SCAN_IO) {
-                       /* Clock Data Bytes In and Out LSB First */
-                       buffer_write(0x39);
-                       /* LOG_DEBUG("added TDI bytes (io %i)", num_bytes); */
-               } else if (type == SCAN_OUT) {
-                       /* Clock Data Bytes Out on -ve Clock Edge LSB First (no Read) */
-                       buffer_write(0x19);
-                       /* LOG_DEBUG("added TDI bytes (o)"); */
-               } else if (type == SCAN_IN) {
-                       /* Clock Data Bytes In on +ve Clock Edge LSB First (no Write) */
-                       buffer_write(0x28);
-                       /* LOG_DEBUG("added TDI bytes (i %i)", num_bytes); */
-               }
-
-               thisrun_bytes = (num_bytes > 65537) ? 65536 : (num_bytes - 1);
-               thisrun_read  = thisrun_bytes;
-               num_bytes    -= thisrun_bytes;
-               buffer_write((uint8_t) (thisrun_bytes - 1));
-               buffer_write((uint8_t) ((thisrun_bytes - 1) >> 8));
-
-               if (type != SCAN_IN) {
-                       /* add complete bytes */
-                       while (thisrun_bytes-- > 0) {
-                               buffer_write(buffer[cur_byte]);
-                               cur_byte++;
-                               bits_left -= 8;
-                       }
-               } else /* (type == SCAN_IN) */
-                       bits_left -= 8 * (thisrun_bytes);
-
-               retval = ft2232_write(ft2232_buffer, ft2232_buffer_size, &bytes_written);
-               if (retval != ERROR_OK) {
-                       LOG_ERROR("couldn't write MPSSE commands to FT2232");
-                       exit(-1);
-               }
-               LOG_DEBUG("ft2232_buffer_size: %i, bytes_written: %i",
-                       ft2232_buffer_size,
-                       (int)bytes_written);
-               ft2232_buffer_size = 0;
-
-               if (type != SCAN_OUT) {
-                       retval = ft2232_read(receive_pointer, thisrun_read, &bytes_read);
-                       if (retval != ERROR_OK) {
-                               LOG_ERROR("couldn't read from FT2232");
-                               exit(-1);
-                       }
-                       LOG_DEBUG("thisrun_read: %i, bytes_read: %i",
-                               thisrun_read,
-                               (int)bytes_read);
-                       receive_pointer += bytes_read;
-               }
-       }
-
-       thisrun_read = 0;
-
-       /* the most signifcant bit is scanned during TAP movement */
-       if (type != SCAN_IN)
-               last_bit = (buffer[cur_byte] >> (bits_left - 1)) & 0x1;
-       else
-               last_bit = 0;
-
-       /* process remaining bits but the last one */
-       if (bits_left > 1) {
-               if (type == SCAN_IO) {
-                       /* Clock Data Bits In and Out LSB First */
-                       buffer_write(0x3b);
-                       /* LOG_DEBUG("added TDI bits (io) %i", bits_left - 1); */
-               } else if (type == SCAN_OUT) {
-                       /* Clock Data Bits Out on -ve Clock Edge LSB First (no Read) */
-                       buffer_write(0x1b);
-                       /* LOG_DEBUG("added TDI bits (o)"); */
-               } else if (type == SCAN_IN) {
-                       /* Clock Data Bits In on +ve Clock Edge LSB First (no Write) */
-                       buffer_write(0x2a);
-                       /* LOG_DEBUG("added TDI bits (i %i)", bits_left - 1); */
-               }
-               buffer_write(bits_left - 2);
-               if (type != SCAN_IN)
-                       buffer_write(buffer[cur_byte]);
-
-               if (type != SCAN_OUT)
-                       thisrun_read += 2;
-       }
-
-       if (tap_get_end_state() == TAP_DRSHIFT) {
-               if (type == SCAN_IO) {
-                       /* Clock Data Bits In and Out LSB First */
-                       buffer_write(0x3b);
-                       /* LOG_DEBUG("added TDI bits (io) %i", bits_left - 1); */
-               } else if (type == SCAN_OUT) {
-                       /* Clock Data Bits Out on -ve Clock Edge LSB First (no Read) */
-                       buffer_write(0x1b);
-                       /* LOG_DEBUG("added TDI bits (o)"); */
-               } else if (type == SCAN_IN) {
-                       /* Clock Data Bits In on +ve Clock Edge LSB First (no Write) */
-                       buffer_write(0x2a);
-                       /* LOG_DEBUG("added TDI bits (i %i)", bits_left - 1); */
-               }
-               buffer_write(0x0);
-               buffer_write(last_bit);
-       } else {
-               int tms_bits  = tap_get_tms_path(tap_get_state(), tap_get_end_state());
-               int tms_count = tap_get_tms_path_len(tap_get_state(), tap_get_end_state());
-               uint8_t mpsse_cmd;
-
-               /* move from Shift-IR/DR to end state */
-               if (type != SCAN_OUT) {
-                       /* Clock Data to TMS/CS Pin with Read */
-                       mpsse_cmd = 0x6b;
-                       /* LOG_DEBUG("added TMS scan (read)"); */
-               } else {
-                       /* Clock Data to TMS/CS Pin (no Read) */
-                       mpsse_cmd = 0x4b;
-                       /* LOG_DEBUG("added TMS scan (no read)"); */
-               }
-
-               DEBUG_JTAG_IO("finish, %s", (type == SCAN_OUT) ? "no read" : "read");
-               clock_tms(mpsse_cmd, tms_bits, tms_count, last_bit);
-       }
-
-       if (type != SCAN_OUT)
-               thisrun_read += 1;
-
-       retval = ft2232_write(ft2232_buffer, ft2232_buffer_size, &bytes_written);
-       if (retval != ERROR_OK) {
-               LOG_ERROR("couldn't write MPSSE commands to FT2232");
-               exit(-1);
-       }
-       LOG_DEBUG("ft2232_buffer_size: %i, bytes_written: %i",
-               ft2232_buffer_size,
-               (int)bytes_written);
-       ft2232_buffer_size = 0;
-
-       if (type != SCAN_OUT) {
-               retval = ft2232_read(receive_pointer, thisrun_read, &bytes_read);
-               if (retval != ERROR_OK) {
-                       LOG_ERROR("couldn't read from FT2232");
-                       exit(-1);
-               }
-               LOG_DEBUG("thisrun_read: %i, bytes_read: %i",
-                       thisrun_read,
-                       (int)bytes_read);
-       }
-
-       free(receive_buffer);
-
-       return ERROR_OK;
-}
-
-static int ft2232_predict_scan_out(int scan_size, enum scan_type type)
-{
-       int predicted_size = 3;
-       int num_bytes = (scan_size - 1) / 8;
-
-       if (tap_get_state() != TAP_DRSHIFT)
-               predicted_size += get_tms_buffer_requirements(
-                               tap_get_tms_path_len(tap_get_state(), TAP_DRSHIFT));
-
-       if (type == SCAN_IN) {  /* only from device to host */
-               /* complete bytes */
-               predicted_size += DIV_ROUND_UP(num_bytes, 65536) * 3;
-
-               /* remaining bits - 1 (up to 7) */
-               predicted_size += ((scan_size - 1) % 8) ? 2 : 0;
-       } else {/* host to device, or bidirectional
-                * complete bytes */
-               predicted_size += num_bytes + DIV_ROUND_UP(num_bytes, 65536) * 3;
-
-               /* remaining bits -1 (up to 7) */
-               predicted_size += ((scan_size - 1) % 8) ? 3 : 0;
-       }
-
-       return predicted_size;
-}
-
-static int ft2232_predict_scan_in(int scan_size, enum scan_type type)
-{
-       int predicted_size = 0;
-
-       if (type != SCAN_OUT) {
-               /* complete bytes */
-               predicted_size +=
-                       (DIV_ROUND_UP(scan_size, 8) > 1) ? (DIV_ROUND_UP(scan_size, 8) - 1) : 0;
-
-               /* remaining bits - 1 */
-               predicted_size += ((scan_size - 1) % 8) ? 1 : 0;
-
-               /* last bit (from TMS scan) */
-               predicted_size += 1;
-       }
-
-       /* LOG_DEBUG("scan_size: %i, predicted_size: %i", scan_size, predicted_size); */
-
-       return predicted_size;
-}
-
-/* semi-generic FT2232/FT4232 reset code */
-static void ftx23_reset(int trst, int srst)
-{
-       enum reset_types jtag_reset_config = jtag_get_reset_config();
-       if (trst == 1) {
-               if (jtag_reset_config & RESET_TRST_OPEN_DRAIN)
-                       low_direction |= nTRSTnOE;      /* switch to output pin (output is low) */
-               else
-                       low_output &= ~nTRST;           /* switch output low */
-       } else if (trst == 0) {
-               if (jtag_reset_config & RESET_TRST_OPEN_DRAIN)
-                       low_direction &= ~nTRSTnOE;     /* switch to input pin (high-Z + internal
-                                                        *and external pullup) */
-               else
-                       low_output |= nTRST;            /* switch output high */
-       }
-
-       if (srst == 1) {
-               if (jtag_reset_config & RESET_SRST_PUSH_PULL)
-                       low_output &= ~nSRST;           /* switch output low */
-               else
-                       low_direction |= nSRSTnOE;      /* switch to output pin (output is low) */
-       } else if (srst == 0) {
-               if (jtag_reset_config & RESET_SRST_PUSH_PULL)
-                       low_output |= nSRST;            /* switch output high */
-               else
-                       low_direction &= ~nSRSTnOE;     /* switch to input pin (high-Z) */
-       }
-
-       /* command "set data bits low byte" */
-       buffer_write(0x80);
-       buffer_write(low_output);
-       buffer_write(low_direction);
-}
-
-static void jtagkey_reset(int trst, int srst)
-{
-       enum reset_types jtag_reset_config = jtag_get_reset_config();
-       if (trst == 1) {
-               if (jtag_reset_config & RESET_TRST_OPEN_DRAIN)
-                       high_output &= ~nTRSTnOE;
-               else
-                       high_output &= ~nTRST;
-       } else if (trst == 0) {
-               if (jtag_reset_config & RESET_TRST_OPEN_DRAIN)
-                       high_output |= nTRSTnOE;
-               else
-                       high_output |= nTRST;
-       }
-
-       if (srst == 1) {
-               if (jtag_reset_config & RESET_SRST_PUSH_PULL)
-                       high_output &= ~nSRST;
-               else
-                       high_output &= ~nSRSTnOE;
-       } else if (srst == 0) {
-               if (jtag_reset_config & RESET_SRST_PUSH_PULL)
-                       high_output |= nSRST;
-               else
-                       high_output |= nSRSTnOE;
-       }
-
-       /* command "set data bits high byte" */
-       buffer_write(0x82);
-       buffer_write(high_output);
-       buffer_write(high_direction);
-       LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x",
-               trst,
-               srst,
-               high_output,
-               high_direction);
-}
-
-static void olimex_jtag_reset(int trst, int srst)
-{
-       enum reset_types jtag_reset_config = jtag_get_reset_config();
-       if (trst == 1) {
-               if (jtag_reset_config & RESET_TRST_OPEN_DRAIN)
-                       high_output &= ~nTRSTnOE;
-               else
-                       high_output &= ~nTRST;
-       } else if (trst == 0) {
-               if (jtag_reset_config & RESET_TRST_OPEN_DRAIN)
-                       high_output |= nTRSTnOE;
-               else
-                       high_output |= nTRST;
-       }
-
-       if (srst == 1)
-               high_output |= nSRST;
-       else if (srst == 0)
-               high_output &= ~nSRST;
-
-       /* command "set data bits high byte" */
-       buffer_write(0x82);
-       buffer_write(high_output);
-       buffer_write(high_direction);
-       LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x",
-               trst,
-               srst,
-               high_output,
-               high_direction);
-}
-
-static void axm0432_jtag_reset(int trst, int srst)
-{
-       if (trst == 1) {
-               tap_set_state(TAP_RESET);
-               high_output &= ~nTRST;
-       } else if (trst == 0)
-               high_output |= nTRST;
-
-       if (srst == 1)
-               high_output &= ~nSRST;
-       else if (srst == 0)
-               high_output |= nSRST;
-
-       /* command "set data bits low byte" */
-       buffer_write(0x82);
-       buffer_write(high_output);
-       buffer_write(high_direction);
-       LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x",
-               trst,
-               srst,
-               high_output,
-               high_direction);
-}
-
-static void flyswatter_reset(int trst, int srst)
-{
-       if (trst == 1)
-               low_output &= ~nTRST;
-       else if (trst == 0)
-               low_output |= nTRST;
-
-       if (srst == 1)
-               low_output |= nSRST;
-       else if (srst == 0)
-               low_output &= ~nSRST;
-
-       /* command "set data bits low byte" */
-       buffer_write(0x80);
-       buffer_write(low_output);
-       buffer_write(low_direction);
-       LOG_DEBUG("trst: %i, srst: %i, low_output: 0x%2.2x, low_direction: 0x%2.2x",
-               trst,
-               srst,
-               low_output,
-               low_direction);
-}
-
-static void flyswatter1_reset(int trst, int srst)
-{
-       flyswatter_reset(trst, srst);
-}
-
-static void flyswatter2_reset(int trst, int srst)
-{
-       flyswatter_reset(trst, !srst);
-}
-
-static void minimodule_reset(int trst, int srst)
-{
-       if (srst == 1)
-               low_output &= ~nSRST;
-       else if (srst == 0)
-               low_output |= nSRST;
-
-       /* command "set data bits low byte" */
-       buffer_write(0x80);
-       buffer_write(low_output);
-       buffer_write(low_direction);
-       LOG_DEBUG("trst: %i, srst: %i, low_output: 0x%2.2x, low_direction: 0x%2.2x",
-               trst,
-               srst,
-               low_output,
-               low_direction);
-}
-
-static void turtle_reset(int trst, int srst)
-{
-       if (trst == 1)
-               LOG_ERROR("Can't assert TRST: the adapter lacks this signal");
-
-       if (srst == 1)
-               low_output |= nSRST;
-       else if (srst == 0)
-               low_output &= ~nSRST;
-
-       /* command "set data bits low byte" */
-       buffer_write(0x80);
-       buffer_write(low_output);
-       buffer_write(low_direction);
-       LOG_DEBUG("srst: %i, low_output: 0x%2.2x, low_direction: 0x%2.2x",
-               srst,
-               low_output,
-               low_direction);
-}
-
-static void comstick_reset(int trst, int srst)
-{
-       if (trst == 1)
-               high_output &= ~nTRST;
-       else if (trst == 0)
-               high_output |= nTRST;
-
-       if (srst == 1)
-               high_output &= ~nSRST;
-       else if (srst == 0)
-               high_output |= nSRST;
-
-       /* command "set data bits high byte" */
-       buffer_write(0x82);
-       buffer_write(high_output);
-       buffer_write(high_direction);
-       LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x",
-               trst,
-               srst,
-               high_output,
-               high_direction);
-}
-
-static void stm32stick_reset(int trst, int srst)
-{
-       if (trst == 1)
-               high_output &= ~nTRST;
-       else if (trst == 0)
-               high_output |= nTRST;
-
-       if (srst == 1)
-               low_output &= ~nSRST;
-       else if (srst == 0)
-               low_output |= nSRST;
-
-       /* command "set data bits low byte" */
-       buffer_write(0x80);
-       buffer_write(low_output);
-       buffer_write(low_direction);
-
-       /* command "set data bits high byte" */
-       buffer_write(0x82);
-       buffer_write(high_output);
-       buffer_write(high_direction);
-       LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x",
-               trst,
-               srst,
-               high_output,
-               high_direction);
-}
-
-static void sheevaplug_reset(int trst, int srst)
-{
-       if (trst == 1)
-               high_output &= ~nTRST;
-       else if (trst == 0)
-               high_output |= nTRST;
-
-       if (srst == 1)
-               high_output &= ~nSRSTnOE;
-       else if (srst == 0)
-               high_output |= nSRSTnOE;
-
-       /* command "set data bits high byte" */
-       buffer_write(0x82);
-       buffer_write(high_output);
-       buffer_write(high_direction);
-       LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x",
-               trst,
-               srst,
-               high_output,
-               high_direction);
-}
-
-static void redbee_reset(int trst, int srst)
-{
-       if (trst == 1) {
-               tap_set_state(TAP_RESET);
-               high_output &= ~nTRST;
-       } else if (trst == 0)
-               high_output |= nTRST;
-
-       if (srst == 1)
-               high_output &= ~nSRST;
-       else if (srst == 0)
-               high_output |= nSRST;
-
-       /* command "set data bits low byte" */
-       buffer_write(0x82);
-       buffer_write(high_output);
-       buffer_write(high_direction);
-       LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, "
-               "high_direction: 0x%2.2x", trst, srst, high_output,
-               high_direction);
-}
-
-static void xds100v2_reset(int trst, int srst)
-{
-       if (trst == 1) {
-               tap_set_state(TAP_RESET);
-               high_output &= ~nTRST;
-       } else if (trst == 0)
-               high_output |= nTRST;
-
-       if (srst == 1)
-               high_output |= nSRST;
-       else if (srst == 0)
-               high_output &= ~nSRST;
-
-       /* command "set data bits low byte" */
-       buffer_write(0x82);
-       buffer_write(high_output);
-       buffer_write(high_direction);
-       LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, "
-               "high_direction: 0x%2.2x", trst, srst, high_output,
-               high_direction);
-}
-
-static int ft2232_execute_runtest(struct jtag_command *cmd)
-{
-       int retval;
-       int i;
-       int predicted_size = 0;
-       retval = ERROR_OK;
-
-       DEBUG_JTAG_IO("runtest %i cycles, end in %s",
-               cmd->cmd.runtest->num_cycles,
-               tap_state_name(cmd->cmd.runtest->end_state));
-
-       /* only send the maximum buffer size that FT2232C can handle */
-       predicted_size = 0;
-       if (tap_get_state() != TAP_IDLE)
-               predicted_size += 3;
-       predicted_size += 3 * DIV_ROUND_UP(cmd->cmd.runtest->num_cycles, 7);
-       if (cmd->cmd.runtest->end_state != TAP_IDLE)
-               predicted_size += 3;
-       if (tap_get_end_state() != TAP_IDLE)
-               predicted_size += 3;
-       if (ft2232_buffer_size + predicted_size + 1 > FT2232_BUFFER_SIZE) {
-               if (ft2232_send_and_recv(first_unsent, cmd) != ERROR_OK)
-                       retval = ERROR_JTAG_QUEUE_FAILED;
-               require_send = 0;
-               first_unsent = cmd;
-       }
-       if (tap_get_state() != TAP_IDLE) {
-               move_to_state(TAP_IDLE);
-               require_send = 1;
-       }
-       i = cmd->cmd.runtest->num_cycles;
-       while (i > 0) {
-               /* there are no state transitions in this code, so omit state tracking */
-
-               /* command "Clock Data to TMS/CS Pin (no Read)" */
-               buffer_write(0x4b);
-
-               /* scan 7 bits */
-               buffer_write((i > 7) ? 6 : (i - 1));
-
-               /* TMS data bits */
-               buffer_write(0x0);
-
-               i -= (i > 7) ? 7 : i;
-               /* LOG_DEBUG("added TMS scan (no read)"); */
-       }
-
-       ft2232_end_state(cmd->cmd.runtest->end_state);
-
-       if (tap_get_state() != tap_get_end_state())
-               move_to_state(tap_get_end_state());
-
-       require_send = 1;
-       DEBUG_JTAG_IO("runtest: %i, end in %s",
-               cmd->cmd.runtest->num_cycles,
-               tap_state_name(tap_get_end_state()));
-       return retval;
-}
-
-static int ft2232_execute_statemove(struct jtag_command *cmd)
-{
-       int predicted_size = 0;
-       int retval = ERROR_OK;
-
-       DEBUG_JTAG_IO("statemove end in %s",
-               tap_state_name(cmd->cmd.statemove->end_state));
-
-       /* only send the maximum buffer size that FT2232C can handle */
-       predicted_size = 3;
-       if (ft2232_buffer_size + predicted_size + 1 > FT2232_BUFFER_SIZE) {
-               if (ft2232_send_and_recv(first_unsent, cmd) != ERROR_OK)
-                       retval = ERROR_JTAG_QUEUE_FAILED;
-               require_send = 0;
-               first_unsent = cmd;
-       }
-       ft2232_end_state(cmd->cmd.statemove->end_state);
-
-       /* For TAP_RESET, ignore the current recorded state.  It's often
-        * wrong at server startup, and this transation is critical whenever
-        * it's requested.
-        */
-       if (tap_get_end_state() == TAP_RESET) {
-               clock_tms(0x4b,  0xff, 5, 0);
-               require_send = 1;
-
-               /* shortest-path move to desired end state */
-       } else if (tap_get_state() != tap_get_end_state()) {
-               move_to_state(tap_get_end_state());
-               require_send = 1;
-       }
-
-       return retval;
-}
-
-/**
- * Clock a bunch of TMS (or SWDIO) transitions, to change the JTAG
- * (or SWD) state machine.
- */
-static int ft2232_execute_tms(struct jtag_command *cmd)
-{
-       int retval = ERROR_OK;
-       unsigned num_bits = cmd->cmd.tms->num_bits;
-       const uint8_t *bits = cmd->cmd.tms->bits;
-       unsigned count;
-
-       DEBUG_JTAG_IO("TMS: %d bits", num_bits);
-
-       /* only send the maximum buffer size that FT2232C can handle */
-       count = 3 * DIV_ROUND_UP(num_bits, 4);
-       if (ft2232_buffer_size + 3*count + 1 > FT2232_BUFFER_SIZE) {
-               if (ft2232_send_and_recv(first_unsent, cmd) != ERROR_OK)
-                       retval = ERROR_JTAG_QUEUE_FAILED;
-
-               require_send = 0;
-               first_unsent = cmd;
-       }
-
-       /* Shift out in batches of at most 6 bits; there's a report of an
-        * FT2232 bug in this area, where shifting exactly 7 bits can make
-        * problems with TMS signaling for the last clock cycle:
-        *
-        *    http://developer.intra2net.com/mailarchive/html/
-        *              libftdi/2009/msg00292.html
-        *
-        * Command 0x4b is: "Clock Data to TMS/CS Pin (no Read)"
-        *
-        * Note that pathmoves in JTAG are not often seven bits, so that
-        * isn't a particularly likely situation outside of "special"
-        * signaling such as switching between JTAG and SWD modes.
-        */
-       while (num_bits) {
-               if (num_bits <= 6) {
-                       buffer_write(0x4b);
-                       buffer_write(num_bits - 1);
-                       buffer_write(*bits & 0x3f);
-                       break;
-               }
-
-               /* Yes, this is lazy ... we COULD shift out more data
-                * bits per operation, but doing it in nybbles is easy
-                */
-               buffer_write(0x4b);
-               buffer_write(3);
-               buffer_write(*bits & 0xf);
-               num_bits -= 4;
-
-               count  = (num_bits > 4) ? 4 : num_bits;
-
-               buffer_write(0x4b);
-               buffer_write(count - 1);
-               buffer_write((*bits >> 4) & 0xf);
-               num_bits -= count;
-
-               bits++;
-       }
-
-       require_send = 1;
-       return retval;
-}
-
-static int ft2232_execute_pathmove(struct jtag_command *cmd)
-{
-       int predicted_size = 0;
-       int retval = ERROR_OK;
-
-       tap_state_t *path = cmd->cmd.pathmove->path;
-       int num_states    = cmd->cmd.pathmove->num_states;
-
-       DEBUG_JTAG_IO("pathmove: %i states, current: %s  end: %s", num_states,
-               tap_state_name(tap_get_state()),
-               tap_state_name(path[num_states-1]));
-
-       /* only send the maximum buffer size that FT2232C can handle */
-       predicted_size = 3 * DIV_ROUND_UP(num_states, 7);
-       if (ft2232_buffer_size + predicted_size + 1 > FT2232_BUFFER_SIZE) {
-               if (ft2232_send_and_recv(first_unsent, cmd) != ERROR_OK)
-                       retval = ERROR_JTAG_QUEUE_FAILED;
-
-               require_send = 0;
-               first_unsent = cmd;
-       }
-
-       ft2232_add_pathmove(path, num_states);
-       require_send = 1;
-
-       return retval;
-}
-
-static int ft2232_execute_scan(struct jtag_command *cmd)
-{
-       uint8_t *buffer;
-       int scan_size;                          /* size of IR or DR scan */
-       int predicted_size = 0;
-       int retval = ERROR_OK;
-
-       enum scan_type type = jtag_scan_type(cmd->cmd.scan);
-
-       DEBUG_JTAG_IO("%s type:%d", cmd->cmd.scan->ir_scan ? "IRSCAN" : "DRSCAN", type);
-
-       scan_size = jtag_build_buffer(cmd->cmd.scan, &buffer);
-
-       predicted_size = ft2232_predict_scan_out(scan_size, type);
-       if ((predicted_size + 1) > FT2232_BUFFER_SIZE) {
-               LOG_DEBUG("oversized ft2232 scan (predicted_size > FT2232_BUFFER_SIZE)");
-               /* unsent commands before this */
-               if (first_unsent != cmd)
-                       if (ft2232_send_and_recv(first_unsent, cmd) != ERROR_OK)
-                               retval = ERROR_JTAG_QUEUE_FAILED;
-
-               /* current command */
-               ft2232_end_state(cmd->cmd.scan->end_state);
-               ft2232_large_scan(cmd->cmd.scan, type, buffer, scan_size);
-               require_send = 0;
-               first_unsent = cmd->next;
-               if (buffer)
-                       free(buffer);
-               return retval;
-       } else if (ft2232_buffer_size + predicted_size + 1 > FT2232_BUFFER_SIZE) {
-               LOG_DEBUG(
-                       "ft2232 buffer size reached, sending queued commands (first_unsent: %p, cmd: %p)",
-                       first_unsent,
-                       cmd);
-               if (ft2232_send_and_recv(first_unsent, cmd) != ERROR_OK)
-                       retval = ERROR_JTAG_QUEUE_FAILED;
-               require_send = 0;
-               first_unsent = cmd;
-       }
-       ft2232_expect_read += ft2232_predict_scan_in(scan_size, type);
-       /* LOG_DEBUG("new read size: %i", ft2232_expect_read); */
-       ft2232_end_state(cmd->cmd.scan->end_state);
-       ft2232_add_scan(cmd->cmd.scan->ir_scan, type, buffer, scan_size);
-       require_send = 1;
-       if (buffer)
-               free(buffer);
-       DEBUG_JTAG_IO("%s scan, %i bits, end in %s",
-               (cmd->cmd.scan->ir_scan) ? "IR" : "DR", scan_size,
-               tap_state_name(tap_get_end_state()));
-       return retval;
-
-}
-
-static int ft2232_execute_reset(struct jtag_command *cmd)
-{
-       int retval;
-       int predicted_size = 0;
-       retval = ERROR_OK;
-
-       DEBUG_JTAG_IO("reset trst: %i srst %i",
-               cmd->cmd.reset->trst, cmd->cmd.reset->srst);
-
-       /* only send the maximum buffer size that FT2232C can handle */
-       predicted_size = 3;
-       if (ft2232_buffer_size + predicted_size + 1 > FT2232_BUFFER_SIZE) {
-               if (ft2232_send_and_recv(first_unsent, cmd) != ERROR_OK)
-                       retval = ERROR_JTAG_QUEUE_FAILED;
-               require_send = 0;
-               first_unsent = cmd;
-       }
-
-       if ((cmd->cmd.reset->trst == 1) ||
-           (cmd->cmd.reset->srst && (jtag_get_reset_config() & RESET_SRST_PULLS_TRST)))
-               tap_set_state(TAP_RESET);
-
-       layout->reset(cmd->cmd.reset->trst, cmd->cmd.reset->srst);
-       require_send = 1;
-
-       DEBUG_JTAG_IO("trst: %i, srst: %i",
-               cmd->cmd.reset->trst, cmd->cmd.reset->srst);
-       return retval;
-}
-
-static int ft2232_execute_sleep(struct jtag_command *cmd)
-{
-       int retval;
-       retval = ERROR_OK;
-
-       DEBUG_JTAG_IO("sleep %" PRIi32, cmd->cmd.sleep->us);
-
-       if (ft2232_send_and_recv(first_unsent, cmd) != ERROR_OK)
-               retval = ERROR_JTAG_QUEUE_FAILED;
-       first_unsent = cmd->next;
-       jtag_sleep(cmd->cmd.sleep->us);
-       DEBUG_JTAG_IO("sleep %" PRIi32 " usec while in %s",
-               cmd->cmd.sleep->us,
-               tap_state_name(tap_get_state()));
-       return retval;
-}
-
-static int ft2232_execute_stableclocks(struct jtag_command *cmd)
-{
-       int retval;
-       retval = ERROR_OK;
-
-       /* this is only allowed while in a stable state.  A check for a stable
-        * state was done in jtag_add_clocks()
-        */
-       if (ft2232_stableclocks(cmd->cmd.stableclocks->num_cycles, cmd) != ERROR_OK)
-               retval = ERROR_JTAG_QUEUE_FAILED;
-       DEBUG_JTAG_IO("clocks %i while in %s",
-               cmd->cmd.stableclocks->num_cycles,
-               tap_state_name(tap_get_state()));
-       return retval;
-}
-
-static int ft2232_execute_command(struct jtag_command *cmd)
-{
-       int retval;
-
-       switch (cmd->type) {
-               case JTAG_RESET:
-                       retval = ft2232_execute_reset(cmd);
-                       break;
-               case JTAG_RUNTEST:
-                       retval = ft2232_execute_runtest(cmd);
-                       break;
-               case JTAG_TLR_RESET:
-                       retval = ft2232_execute_statemove(cmd);
-                       break;
-               case JTAG_PATHMOVE:
-                       retval = ft2232_execute_pathmove(cmd);
-                       break;
-               case JTAG_SCAN:
-                       retval = ft2232_execute_scan(cmd);
-                       break;
-               case JTAG_SLEEP:
-                       retval = ft2232_execute_sleep(cmd);
-                       break;
-               case JTAG_STABLECLOCKS:
-                       retval = ft2232_execute_stableclocks(cmd);
-                       break;
-               case JTAG_TMS:
-                       retval = ft2232_execute_tms(cmd);
-                       break;
-               default:
-                       LOG_ERROR("BUG: unknown JTAG command type encountered");
-                       retval = ERROR_JTAG_QUEUE_FAILED;
-                       break;
-       }
-       return retval;
-}
-
-static int ft2232_execute_queue(void)
-{
-       struct jtag_command *cmd = jtag_command_queue;  /* currently processed command */
-       int retval;
-
-       first_unsent = cmd;             /* next command that has to be sent */
-       require_send = 0;
-
-       /* return ERROR_OK, unless ft2232_send_and_recv reports a failed check
-        * that wasn't handled by a caller-provided error handler
-        */
-       retval = ERROR_OK;
-
-       ft2232_buffer_size = 0;
-       ft2232_expect_read = 0;
-
-       /* blink, if the current layout has that feature */
-       if (layout->blink)
-               layout->blink();
-
-       while (cmd) {
-               /* fill the write buffer with the desired command */
-               if (ft2232_execute_command(cmd) != ERROR_OK)
-                       retval = ERROR_JTAG_QUEUE_FAILED;
-               /* Start reading input before FT2232 TX buffer fills up.
-                * Sometimes this happens because we don't know the
-                * length of the last command before we execute it. So
-                * we simple inform the user.
-                */
-               cmd = cmd->next;
-
-               if (ft2232_expect_read >= FT2232_BUFFER_READ_QUEUE_SIZE) {
-                       if (ft2232_expect_read > (FT2232_BUFFER_READ_QUEUE_SIZE+1))
-                               LOG_DEBUG("read buffer size looks too high %d/%d",
-                                       ft2232_expect_read,
-                                       (FT2232_BUFFER_READ_QUEUE_SIZE+1));
-                       if (ft2232_send_and_recv(first_unsent, cmd) != ERROR_OK)
-                               retval = ERROR_JTAG_QUEUE_FAILED;
-                       first_unsent = cmd;
-               }
-       }
-
-       if (require_send > 0)
-               if (ft2232_send_and_recv(first_unsent, cmd) != ERROR_OK)
-                       retval = ERROR_JTAG_QUEUE_FAILED;
-
-       return retval;
-}
-
-#if BUILD_FT2232_FTD2XX == 1
-static int ft2232_init_ftd2xx(uint16_t vid, uint16_t pid, int more, int *try_more)
-{
-       FT_STATUS status;
-       DWORD deviceID;
-       char SerialNumber[16];
-       char Description[64];
-       DWORD openex_flags  = 0;
-       char *openex_string = NULL;
-       uint8_t latency_timer;
-
-       if (layout == NULL) {
-               LOG_WARNING("No ft2232 layout specified'");
-               return ERROR_JTAG_INIT_FAILED;
-       }
-
-       LOG_DEBUG("'ft2232' interface using FTD2XX with '%s' layout (%4.4x:%4.4x)",
-                       layout->name, vid, pid);
-
-#if IS_WIN32 == 0
-       /* Add non-standard Vid/Pid to the linux driver */
-       status = FT_SetVIDPID(vid, pid);
-       if (status != FT_OK)
-               LOG_WARNING("couldn't add %4.4x:%4.4x", vid, pid);
-
-#endif
-
-       if (ft2232_device_desc && ft2232_serial) {
-               LOG_WARNING(
-                       "can't open by device description and serial number, giving precedence to serial");
-               ft2232_device_desc = NULL;
-       }
-
-       if (ft2232_device_desc) {
-               openex_string = ft2232_device_desc;
-               openex_flags  = FT_OPEN_BY_DESCRIPTION;
-       } else if (ft2232_serial) {
-               openex_string = ft2232_serial;
-               openex_flags  = FT_OPEN_BY_SERIAL_NUMBER;
-       } else {
-               LOG_ERROR("neither device description nor serial number specified");
-               LOG_ERROR(
-                       "please add \"ft2232_device_desc <string>\" or \"ft2232_serial <string>\" to your .cfg file");
-
-               return ERROR_JTAG_INIT_FAILED;
-       }
-
-       status = FT_OpenEx(openex_string, openex_flags, &ftdih);
-       if (status != FT_OK) {
-               /* under Win32, the FTD2XX driver appends an "A" to the end
-                * of the description, if we tried by the desc, then
-                * try by the alternate "A" description. */
-               if (openex_string == ft2232_device_desc) {
-                       /* Try the alternate method. */
-                       openex_string = ft2232_device_desc_A;
-                       status = FT_OpenEx(openex_string, openex_flags, &ftdih);
-                       if (status == FT_OK) {
-                               /* yea, the "alternate" method worked! */
-                       } else {
-                               /* drat, give the user a meaningfull message.
-                                * telling the use we tried *BOTH* methods. */
-                               LOG_WARNING("Unable to open FTDI Device tried: '%s' and '%s'",
-                                       ft2232_device_desc,
-                                       ft2232_device_desc_A);
-                       }
-               }
-       }
-
-       if (status != FT_OK) {
-               DWORD num_devices;
-
-               if (more) {
-                       LOG_WARNING("unable to open ftdi device (trying more): %s",
-                               ftd2xx_status_string(status));
-                       *try_more = 1;
-                       return ERROR_JTAG_INIT_FAILED;
-               }
-               LOG_ERROR("unable to open ftdi device: %s",
-                       ftd2xx_status_string(status));
-               status = FT_ListDevices(&num_devices, NULL, FT_LIST_NUMBER_ONLY);
-               if (status == FT_OK) {
-                       char **desc_array = malloc(sizeof(char *) * (num_devices + 1));
-                       uint32_t i;
-
-                       for (i = 0; i < num_devices; i++)
-                               desc_array[i] = malloc(64);
-
-                       desc_array[num_devices] = NULL;
-
-                       status = FT_ListDevices(desc_array, &num_devices, FT_LIST_ALL | openex_flags);
-
-                       if (status == FT_OK) {
-                               LOG_ERROR("ListDevices: %" PRIu32, (uint32_t)num_devices);
-                               for (i = 0; i < num_devices; i++)
-                                       LOG_ERROR("%" PRIu32 ": \"%s\"", i, desc_array[i]);
-                       }
-
-                       for (i = 0; i < num_devices; i++)
-                               free(desc_array[i]);
-
-                       free(desc_array);
-               } else
-                       LOG_ERROR("ListDevices: NONE");
-               return ERROR_JTAG_INIT_FAILED;
-       }
-
-       status = FT_SetLatencyTimer(ftdih, ft2232_latency);
-       if (status != FT_OK) {
-               LOG_ERROR("unable to set latency timer: %s",
-                       ftd2xx_status_string(status));
-               return ERROR_JTAG_INIT_FAILED;
-       }
-
-       status = FT_GetLatencyTimer(ftdih, &latency_timer);
-       if (status != FT_OK) {
-               /* ftd2xx 1.04 (linux) has a bug when calling FT_GetLatencyTimer
-                * so ignore errors if using this driver version */
-               DWORD dw_version;
-
-               status = FT_GetDriverVersion(ftdih, &dw_version);
-               LOG_ERROR("unable to get latency timer: %s",
-                       ftd2xx_status_string(status));
-
-               if ((status == FT_OK) && (dw_version == 0x10004)) {
-                       LOG_ERROR("ftd2xx 1.04 detected - this has known issues " \
-                               "with FT_GetLatencyTimer, upgrade to a newer version");
-               } else
-                       return ERROR_JTAG_INIT_FAILED;
-       } else
-               LOG_DEBUG("current latency timer: %i", latency_timer);
-
-       status = FT_SetTimeouts(ftdih, 5000, 5000);
-       if (status != FT_OK) {
-               LOG_ERROR("unable to set timeouts: %s",
-                       ftd2xx_status_string(status));
-               return ERROR_JTAG_INIT_FAILED;
-       }
-
-       status = FT_SetBitMode(ftdih, 0x0b, 2);
-       if (status != FT_OK) {
-               LOG_ERROR("unable to enable bit i/o mode: %s",
-                       ftd2xx_status_string(status));
-               return ERROR_JTAG_INIT_FAILED;
-       }
-
-       status = FT_GetDeviceInfo(ftdih, &ftdi_device, &deviceID,
-                       SerialNumber, Description, NULL);
-       if (status != FT_OK) {
-               LOG_ERROR("unable to get FT_GetDeviceInfo: %s",
-                       ftd2xx_status_string(status));
-               return ERROR_JTAG_INIT_FAILED;
-       } else {
-               static const char *type_str[] = {
-                       "BM", "AM", "100AX", "UNKNOWN", "2232C", "232R", "2232H", "4232H", "232H"
-               };
-               unsigned no_of_known_types = ARRAY_SIZE(type_str) - 1;
-               unsigned type_index = ((unsigned)ftdi_device <= no_of_known_types)
-                       ? ftdi_device : FT_DEVICE_UNKNOWN;
-               LOG_INFO("device: %" PRIu32 " \"%s\"", (uint32_t)ftdi_device, type_str[type_index]);
-               LOG_INFO("deviceID: %" PRIu32, (uint32_t)deviceID);
-               LOG_INFO("SerialNumber: %s", SerialNumber);
-               LOG_INFO("Description: %s", Description);
-       }
-
-       return ERROR_OK;
-}
-
-static int ft2232_purge_ftd2xx(void)
-{
-       FT_STATUS status;
-
-       status = FT_Purge(ftdih, FT_PURGE_RX | FT_PURGE_TX);
-       if (status != FT_OK) {
-               LOG_ERROR("error purging ftd2xx device: %s",
-                       ftd2xx_status_string(status));
-               return ERROR_JTAG_INIT_FAILED;
-       }
-
-       return ERROR_OK;
-}
-
-#endif /* BUILD_FT2232_FTD2XX == 1 */
-
-#if BUILD_FT2232_LIBFTDI == 1
-static int ft2232_init_libftdi(uint16_t vid, uint16_t pid, int more, int *try_more, int channel)
-{
-       uint8_t latency_timer;
-
-       if (layout == NULL) {
-               LOG_WARNING("No ft2232 layout specified'");
-               return ERROR_JTAG_INIT_FAILED;
-       }
-
-       LOG_DEBUG("'ft2232' interface using libftdi with '%s' layout (%4.4x:%4.4x)",
-               layout->name, vid, pid);
-
-       if (ftdi_init(&ftdic) < 0)
-               return ERROR_JTAG_INIT_FAILED;
-
-       /* default to INTERFACE_A */
-       if (channel == INTERFACE_ANY)
-               channel = INTERFACE_A;
-       if (ftdi_set_interface(&ftdic, channel) < 0) {
-               LOG_ERROR("unable to select FT2232 channel A: %s", ftdic.error_str);
-               return ERROR_JTAG_INIT_FAILED;
-       }
-
-       /* context, vendor id, product id */
-       if (ftdi_usb_open_desc(&ftdic, vid, pid, ft2232_device_desc, ft2232_serial) < 0) {
-               if (more)
-                       LOG_WARNING("unable to open ftdi device (trying more): %s",
-                               ftdic.error_str);
-               else
-                       LOG_ERROR("unable to open ftdi device: %s", ftdic.error_str);
-               *try_more = 1;
-               return ERROR_JTAG_INIT_FAILED;
-       }
-
-       /* There is already a reset in ftdi_usb_open_desc, this should be redundant */
-       if (ftdi_usb_reset(&ftdic) < 0) {
-               LOG_ERROR("unable to reset ftdi device");
-               return ERROR_JTAG_INIT_FAILED;
-       }
-
-       if (ftdi_set_latency_timer(&ftdic, ft2232_latency) < 0) {
-               LOG_ERROR("unable to set latency timer");
-               return ERROR_JTAG_INIT_FAILED;
-       }
-
-       if (ftdi_get_latency_timer(&ftdic, &latency_timer) < 0) {
-               LOG_ERROR("unable to get latency timer");
-               return ERROR_JTAG_INIT_FAILED;
-       } else
-               LOG_DEBUG("current latency timer: %i", latency_timer);
-
-       ftdi_set_bitmode(&ftdic, 0x0b, 2);      /* ctx, JTAG I/O mask */
-
-       ftdi_device = ftdic.type;
-       static const char *type_str[] = {
-               "AM", "BM", "2232C", "R", "2232H", "4232H", "232H", "Unknown"
-       };
-       unsigned no_of_known_types = ARRAY_SIZE(type_str) - 1;
-       unsigned type_index = ((unsigned)ftdi_device < no_of_known_types)
-               ? ftdi_device : no_of_known_types;
-       LOG_DEBUG("FTDI chip type: %i \"%s\"", (int)ftdi_device, type_str[type_index]);
-       return ERROR_OK;
-}
-
-static int ft2232_purge_libftdi(void)
-{
-       if (ftdi_usb_purge_buffers(&ftdic) < 0) {
-               LOG_ERROR("ftdi_purge_buffers: %s", ftdic.error_str);
-               return ERROR_JTAG_INIT_FAILED;
-       }
-
-       return ERROR_OK;
-}
-
-#endif /* BUILD_FT2232_LIBFTDI == 1 */
-
-static int ft2232_set_data_bits_low_byte(uint8_t value, uint8_t direction)
-{
-       uint8_t buf[3];
-       uint32_t bytes_written;
-
-       buf[0] = 0x80;          /* command "set data bits low byte" */
-       buf[1] = value;         /* value */
-       buf[2] = direction;     /* direction */
-
-       LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]);
-
-       if (ft2232_write(buf, sizeof(buf), &bytes_written) != ERROR_OK) {
-               LOG_ERROR("couldn't initialize data bits low byte");
-               return ERROR_JTAG_INIT_FAILED;
-       }
-
-       return ERROR_OK;
-}
-
-static int ft2232_set_data_bits_high_byte(uint8_t value, uint8_t direction)
-{
-       uint8_t buf[3];
-       uint32_t bytes_written;
-
-       buf[0] = 0x82;          /* command "set data bits high byte" */
-       buf[1] = value;         /* value */
-       buf[2] = direction;     /* direction */
-
-       LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]);
-
-       if (ft2232_write(buf, sizeof(buf), &bytes_written) != ERROR_OK) {
-               LOG_ERROR("couldn't initialize data bits high byte");
-               return ERROR_JTAG_INIT_FAILED;
-       }
-
-       return ERROR_OK;
-}
-
-static int ft2232_init(void)
-{
-       uint8_t buf[1];
-       int retval;
-       uint32_t bytes_written;
-
-       LOG_WARNING("Using DEPRECATED interface driver 'ft2232'");
-#if BUILD_FTDI
-       LOG_INFO("Consider using the 'ftdi' interface driver, with configuration files in interface/ftdi/...");
-#endif
-
-       if (tap_get_tms_path_len(TAP_IRPAUSE, TAP_IRPAUSE) == 7)
-               LOG_DEBUG("ft2232 interface using 7 step jtag state transitions");
-       else
-               LOG_DEBUG("ft2232 interface using shortest path jtag state transitions");
-       if (layout == NULL) {
-               LOG_WARNING("No ft2232 layout specified'");
-               return ERROR_JTAG_INIT_FAILED;
-       }
-
-       for (int i = 0; 1; i++) {
-               /*
-                * "more indicates that there are more IDs to try, so we should
-                * not print an error for an ID mismatch (but for anything
-                * else, we should).
-                *
-                * try_more indicates that the error code returned indicates an
-                * ID mismatch (and nothing else) and that we should proceeed
-                * with the next ID pair.
-                */
-               int more = ft2232_vid[i + 1] || ft2232_pid[i + 1];
-               int try_more = 0;
-
-#if BUILD_FT2232_FTD2XX == 1
-               retval = ft2232_init_ftd2xx(ft2232_vid[i], ft2232_pid[i],
-                               more, &try_more);
-#elif BUILD_FT2232_LIBFTDI == 1
-               retval = ft2232_init_libftdi(ft2232_vid[i], ft2232_pid[i],
-                               more, &try_more, ft2232_channel);
-#endif
-               if (retval >= 0)
-                       break;
-               if (!more || !try_more)
-                       return retval;
-       }
-
-       ft2232_buffer_size = 0;
-       ft2232_buffer = malloc(FT2232_BUFFER_SIZE);
-
-       if (layout->init() != ERROR_OK)
-               return ERROR_JTAG_INIT_FAILED;
-
-       if (ft2232_device_is_highspeed()) {
-#ifndef BUILD_FT2232_HIGHSPEED
- #if BUILD_FT2232_FTD2XX == 1
-               LOG_WARNING(
-                       "High Speed device found - You need a newer FTD2XX driver (version 2.04.16 or later)");
- #elif BUILD_FT2232_LIBFTDI == 1
-               LOG_WARNING(
-                       "High Speed device found - You need a newer libftdi version (0.16 or later)");
- #endif
-#endif
-               /* make sure the legacy mode is disabled */
-               if (ftx232h_clk_divide_by_5(false) != ERROR_OK)
-                       return ERROR_JTAG_INIT_FAILED;
-       }
-
-       buf[0] = 0x85;  /* Disconnect TDI/DO to TDO/DI for Loopback */
-       retval = ft2232_write(buf, 1, &bytes_written);
-       if (retval != ERROR_OK) {
-               LOG_ERROR("couldn't write to FT2232 to disable loopback");
-               return ERROR_JTAG_INIT_FAILED;
-       }
-
-#if BUILD_FT2232_FTD2XX == 1
-       return ft2232_purge_ftd2xx();
-#elif BUILD_FT2232_LIBFTDI == 1
-       return ft2232_purge_libftdi();
-#endif
-
-       return ERROR_OK;
-}
-
-/** Updates defaults for DBUS signals:  the four JTAG signals
- * (TCK, TDI, TDO, TMS) and * the four GPIOL signals.
- */
-static inline void ftx232_dbus_init(void)
-{
-       low_output    = 0x08;
-       low_direction = 0x0b;
-}
-
-/** Initializes DBUS signals:  the four JTAG signals (TCK, TDI, TDO, TMS),
- * the four GPIOL signals.  Initialization covers value and direction,
- * as customized for each layout.
- */
-static int ftx232_dbus_write(void)
-{
-       enum reset_types jtag_reset_config = jtag_get_reset_config();
-       if (jtag_reset_config & RESET_TRST_OPEN_DRAIN) {
-               low_direction &= ~nTRSTnOE;     /* nTRST input */
-               low_output &= ~nTRST;   /* nTRST = 0 */
-       } else {
-               low_direction |= nTRSTnOE;      /* nTRST output */
-               low_output |= nTRST;            /* nTRST = 1 */
-       }
-
-       if (jtag_reset_config & RESET_SRST_PUSH_PULL) {
-               low_direction |= nSRSTnOE;      /* nSRST output */
-               low_output |= nSRST;            /* nSRST = 1 */
-       } else {
-               low_direction &= ~nSRSTnOE;     /* nSRST input */
-               low_output &= ~nSRST;   /* nSRST = 0 */
-       }
-
-       /* initialize low byte for jtag */
-       if (ft2232_set_data_bits_low_byte(low_output, low_direction) != ERROR_OK) {
-               LOG_ERROR("couldn't initialize FT2232 DBUS");
-               return ERROR_JTAG_INIT_FAILED;
-       }
-
-       return ERROR_OK;
-}
-
-static int usbjtag_init(void)
-{
-       /*
-        * NOTE:  This is now _specific_ to the "usbjtag" layout.
-        * Don't try cram any more layouts into this.
-        */
-       ftx232_dbus_init();
-
-       nTRST    = 0x10;
-       nTRSTnOE = 0x10;
-       nSRST    = 0x40;
-       nSRSTnOE = 0x40;
-
-       return ftx232_dbus_write();
-}
-
-static int lm3s811_jtag_init(void)
-{
-       ftx232_dbus_init();
-
-       /* There are multiple revisions of LM3S811 eval boards:
-        * - Rev B (and older?) boards have no SWO trace support.
-        * - Rev C boards add ADBUS_6 DBG_ENn and BDBUS_4 SWO_EN;
-        *   they should use the "luminary_icdi" layout instead.
-        */
-       nTRST = 0x0;
-       nTRSTnOE = 0x00;
-       nSRST = 0x20;
-       nSRSTnOE = 0x20;
-       low_output    = 0x88;
-       low_direction = 0x8b;
-
-       return ftx232_dbus_write();
-}
-
-static int icdi_jtag_init(void)
-{
-       ftx232_dbus_init();
-
-       /* Most Luminary eval boards support SWO trace output,
-        * and should use this "luminary_icdi" layout.
-        *
-        * ADBUS 0..3 are used for JTAG as usual.  GPIOs are used
-        * to switch between JTAG and SWD, or switch the ft2232 UART
-        * on the second MPSSE channel/interface (BDBUS)
-        * between (i) the stellaris UART (on Luminary boards)
-        * or (ii) SWO trace data (generic).
-        *
-        * We come up in JTAG mode and may switch to SWD later (with
-        * SWO/trace option if SWD is active).
-        *
-        * DBUS == GPIO-Lx
-        * CBUS == GPIO-Hx
-        */
-
-
-#define ICDI_JTAG_EN (1 << 7)          /* ADBUS 7 (a.k.a. DBGMOD) */
-#define ICDI_DBG_ENn (1 << 6)          /* ADBUS 6 */
-#define ICDI_SRST (1 << 5)             /* ADBUS 5 */
-
-
-       /* GPIOs on second channel/interface (UART) ... */
-#define ICDI_SWO_EN (1 << 4)           /* BDBUS 4 */
-#define ICDI_TX_SWO (1 << 1)           /* BDBUS 1 */
-#define ICDI_VCP_RX (1 << 0)           /* BDBUS 0 (to stellaris UART) */
-
-       nTRST = 0x0;
-       nTRSTnOE = 0x00;
-       nSRST = ICDI_SRST;
-       nSRSTnOE = ICDI_SRST;
-
-       low_direction |= ICDI_JTAG_EN | ICDI_DBG_ENn;
-       low_output    |= ICDI_JTAG_EN;
-       low_output    &= ~ICDI_DBG_ENn;
-
-       return ftx232_dbus_write();
-}
-
-static int signalyzer_init(void)
-{
-       ftx232_dbus_init();
-
-       nTRST    = 0x10;
-       nTRSTnOE = 0x10;
-       nSRST    = 0x20;
-       nSRSTnOE = 0x20;
-       return ftx232_dbus_write();
-}
-
-static int axm0432_jtag_init(void)
-{
-       low_output    = 0x08;
-       low_direction = 0x2b;
-
-       /* initialize low byte for jtag */
-       if (ft2232_set_data_bits_low_byte(low_output, low_direction) != ERROR_OK) {
-               LOG_ERROR("couldn't initialize FT2232 with 'JTAGkey' layout");
-               return ERROR_JTAG_INIT_FAILED;
-       }
-
-       if (strcmp(layout->name, "axm0432_jtag") == 0) {
-               nTRST    = 0x08;
-               nTRSTnOE = 0x0;         /* No output enable for TRST*/
-               nSRST    = 0x04;
-               nSRSTnOE = 0x0;         /* No output enable for SRST*/
-       } else {
-               LOG_ERROR("BUG: axm0432_jtag_init called for non axm0432 layout");
-               exit(-1);
-       }
-
-       high_output    = 0x0;
-       high_direction = 0x0c;
-
-       enum reset_types jtag_reset_config = jtag_get_reset_config();
-       if (jtag_reset_config & RESET_TRST_OPEN_DRAIN)
-               LOG_ERROR("can't set nTRSTOE to push-pull on the Dicarlo jtag");
-       else
-               high_output |= nTRST;
-
-       if (jtag_reset_config & RESET_SRST_PUSH_PULL)
-               LOG_ERROR("can't set nSRST to push-pull on the Dicarlo jtag");
-       else
-               high_output |= nSRST;
-
-       /* initialize high byte for jtag */
-       if (ft2232_set_data_bits_high_byte(high_output, high_direction) != ERROR_OK) {
-               LOG_ERROR("couldn't initialize FT2232 with 'Dicarlo' layout");
-               return ERROR_JTAG_INIT_FAILED;
-       }
-
-       return ERROR_OK;
-}
-
-static int redbee_init(void)
-{
-       low_output    = 0x08;
-       low_direction = 0x2b;
-
-       /* initialize low byte for jtag */
-       if (ft2232_set_data_bits_low_byte(low_output, low_direction) != ERROR_OK) {
-               LOG_ERROR("couldn't initialize FT2232 with 'redbee' layout");
-               return ERROR_JTAG_INIT_FAILED;
-       }
-
-       nTRST    = 0x08;
-       nTRSTnOE = 0x0;         /* No output enable for TRST*/
-       nSRST    = 0x04;
-       nSRSTnOE = 0x0;         /* No output enable for SRST*/
-
-       high_output    = 0x0;
-       high_direction = 0x0c;
-
-       enum reset_types jtag_reset_config = jtag_get_reset_config();
-       if (jtag_reset_config & RESET_TRST_OPEN_DRAIN)
-               LOG_ERROR("can't set nTRSTOE to push-pull on redbee");
-       else
-               high_output |= nTRST;
-
-       if (jtag_reset_config & RESET_SRST_PUSH_PULL)
-               LOG_ERROR("can't set nSRST to push-pull on redbee");
-       else
-               high_output |= nSRST;
-
-       /* initialize high byte for jtag */
-       if (ft2232_set_data_bits_high_byte(high_output, high_direction) != ERROR_OK) {
-               LOG_ERROR("couldn't initialize FT2232 with 'redbee' layout");
-               return ERROR_JTAG_INIT_FAILED;
-       }
-
-       return ERROR_OK;
-}
-
-static int jtagkey_init(void)
-{
-       low_output    = 0x08;
-       low_direction = 0x1b;
-
-       /* initialize low byte for jtag */
-       if (ft2232_set_data_bits_low_byte(low_output, low_direction) != ERROR_OK) {
-               LOG_ERROR("couldn't initialize FT2232 with 'JTAGkey' layout");
-               return ERROR_JTAG_INIT_FAILED;
-       }
-
-       if (strcmp(layout->name, "jtagkey") == 0) {
-               nTRST    = 0x01;
-               nTRSTnOE = 0x4;
-               nSRST    = 0x02;
-               nSRSTnOE = 0x08;
-       } else if ((strcmp(layout->name, "jtagkey_prototype_v1") == 0)
-                  || (strcmp(layout->name, "oocdlink") == 0)) {
-               nTRST    = 0x02;
-               nTRSTnOE = 0x1;
-               nSRST    = 0x08;
-               nSRSTnOE = 0x04;
-       } else {
-               LOG_ERROR("BUG: jtagkey_init called for non jtagkey layout");
-               exit(-1);
-       }
-
-       high_output    = 0x0;
-       high_direction = 0x0f;
-
-       enum reset_types jtag_reset_config = jtag_get_reset_config();
-       if (jtag_reset_config & RESET_TRST_OPEN_DRAIN) {
-               high_output |= nTRSTnOE;
-               high_output &= ~nTRST;
-       } else {
-               high_output &= ~nTRSTnOE;
-               high_output |= nTRST;
-       }
-
-       if (jtag_reset_config & RESET_SRST_PUSH_PULL) {
-               high_output &= ~nSRSTnOE;
-               high_output |= nSRST;
-       } else {
-               high_output |= nSRSTnOE;
-               high_output &= ~nSRST;
-       }
-
-       /* initialize high byte for jtag */
-       if (ft2232_set_data_bits_high_byte(high_output, high_direction) != ERROR_OK) {
-               LOG_ERROR("couldn't initialize FT2232 with 'JTAGkey' layout");
-               return ERROR_JTAG_INIT_FAILED;
-       }
-
-       return ERROR_OK;
-}
-
-static int olimex_jtag_init(void)
-{
-       low_output    = 0x08;
-       low_direction = 0x1b;
-
-       /* initialize low byte for jtag */
-       if (ft2232_set_data_bits_low_byte(low_output, low_direction) != ERROR_OK) {
-               LOG_ERROR("couldn't initialize FT2232 with 'Olimex' layout");
-               return ERROR_JTAG_INIT_FAILED;
-       }
-
-       nTRST    = 0x01;
-       nTRSTnOE = 0x4;
-       nSRST    = 0x02;
-       nSRSTnOE = 0x00;/* no output enable for nSRST */
-
-       high_output    = 0x0;
-       high_direction = 0x0f;
-
-       enum reset_types jtag_reset_config = jtag_get_reset_config();
-       if (jtag_reset_config & RESET_TRST_OPEN_DRAIN) {
-               high_output |= nTRSTnOE;
-               high_output &= ~nTRST;
-       } else {
-               high_output &= ~nTRSTnOE;
-               high_output |= nTRST;
-       }
-
-       if (jtag_reset_config & RESET_SRST_PUSH_PULL)
-               LOG_ERROR("can't set nSRST to push-pull on the Olimex ARM-USB-OCD");
-       else
-               high_output &= ~nSRST;
-
-       /* turn red LED on */
-       high_output |= 0x08;
-
-       /* initialize high byte for jtag */
-       if (ft2232_set_data_bits_high_byte(high_output, high_direction) != ERROR_OK) {
-               LOG_ERROR("couldn't initialize FT2232 with 'Olimex' layout");
-               return ERROR_JTAG_INIT_FAILED;
-       }
-
-       return ERROR_OK;
-}
-
-static int flyswatter_init(int rev)
-{
-       low_output    = 0x18;
-       low_direction = 0x7b;
-
-       if ((rev < 0) || (rev > 3)) {
-               LOG_ERROR("bogus 'flyswatter' revision supplied (%i)", rev);
-               return ERROR_JTAG_INIT_FAILED;
-       }
-
-       if (rev == 1)
-               low_direction |= 1 << 7;
-
-       /* initialize low byte for jtag */
-       if (ft2232_set_data_bits_low_byte(low_output, low_direction) != ERROR_OK) {
-               LOG_ERROR("couldn't initialize FT2232 with 'flyswatter' layout");
-               return ERROR_JTAG_INIT_FAILED;
-       }
-
-       nTRST    = 0x10;
-       nTRSTnOE = 0x0;         /* not output enable for nTRST */
-       nSRST    = 0x20;
-       nSRSTnOE = 0x00;        /* no output enable for nSRST */
-
-       high_output    = 0x00;
-
-       if (rev == 1)
-               high_direction = 0x0c;
-       else
-               high_direction = 0x01;
-
-       /* turn red LED3 on, LED2 off */
-       high_output |= 0x08;
-
-       /* initialize high byte for jtag */
-       if (ft2232_set_data_bits_high_byte(high_output, high_direction) != ERROR_OK) {
-               LOG_ERROR("couldn't initialize FT2232 with 'flyswatter' layout");
-               return ERROR_JTAG_INIT_FAILED;
-       }
-
-       return ERROR_OK;
-}
-
-static int flyswatter1_init(void)
-{
-       return flyswatter_init(1);
-}
-
-static int flyswatter2_init(void)
-{
-       return flyswatter_init(2);
-}
-
-static int minimodule_init(void)
-{
-       low_output    = 0x18;   /* check if srst should be 1 or 0 initially. (0x08) (flyswatter was
-                                * 0x18) */
-       low_direction = 0xfb;   /* 0xfb; */
-
-       /* initialize low byte for jtag */
-       if (ft2232_set_data_bits_low_byte(low_output, low_direction) != ERROR_OK) {
-               LOG_ERROR("couldn't initialize FT2232 with 'minimodule' layout");
-               return ERROR_JTAG_INIT_FAILED;
-       }
-
-
-       nSRST    = 0x20;
-
-       high_output    = 0x00;
-       high_direction = 0x05;
-
-       /* turn red LED3 on, LED2 off */
-       /* high_output |= 0x08; */
-
-       /* initialize high byte for jtag */
-       if (ft2232_set_data_bits_high_byte(high_output, high_direction) != ERROR_OK) {
-               LOG_ERROR("couldn't initialize FT2232 with 'minimodule' layout");
-               return ERROR_JTAG_INIT_FAILED;
-       }
-
-       return ERROR_OK;
-}
-
-static int turtle_init(void)
-{
-       low_output    = 0x08;
-       low_direction = 0x5b;
-
-       /* initialize low byte for jtag */
-       if (ft2232_set_data_bits_low_byte(low_output, low_direction) != ERROR_OK) {
-               LOG_ERROR("couldn't initialize FT2232 with 'turtelizer2' layout");
-               return ERROR_JTAG_INIT_FAILED;
-       }
-
-       nSRST = 0x40;
-
-       high_output    = 0x00;
-       high_direction = 0x0C;
-
-       /* initialize high byte for jtag */
-       if (ft2232_set_data_bits_high_byte(high_output, high_direction) != ERROR_OK) {
-               LOG_ERROR("couldn't initialize FT2232 with 'turtelizer2' layout");
-               return ERROR_JTAG_INIT_FAILED;
-       }
-
-       return ERROR_OK;
-}
-
-static int comstick_init(void)
-{
-       low_output    = 0x08;
-       low_direction = 0x0b;
-
-       /* initialize low byte for jtag */
-       if (ft2232_set_data_bits_low_byte(low_output, low_direction) != ERROR_OK) {
-               LOG_ERROR("couldn't initialize FT2232 with 'comstick' layout");
-               return ERROR_JTAG_INIT_FAILED;
-       }
-
-       nTRST    = 0x01;
-       nTRSTnOE = 0x00;        /* no output enable for nTRST */
-       nSRST    = 0x02;
-       nSRSTnOE = 0x00;        /* no output enable for nSRST */
-
-       high_output    = 0x03;
-       high_direction = 0x03;
-
-       /* initialize high byte for jtag */
-       if (ft2232_set_data_bits_high_byte(high_output, high_direction) != ERROR_OK) {
-               LOG_ERROR("couldn't initialize FT2232 with 'comstick' layout");
-               return ERROR_JTAG_INIT_FAILED;
-       }
-
-       return ERROR_OK;
-}
-
-static int stm32stick_init(void)
-{
-       low_output    = 0x88;
-       low_direction = 0x8b;
-
-       /* initialize low byte for jtag */
-       if (ft2232_set_data_bits_low_byte(low_output, low_direction) != ERROR_OK) {
-               LOG_ERROR("couldn't initialize FT2232 with 'stm32stick' layout");
-               return ERROR_JTAG_INIT_FAILED;
-       }
-
-       nTRST    = 0x01;
-       nTRSTnOE = 0x00;        /* no output enable for nTRST */
-       nSRST    = 0x80;
-       nSRSTnOE = 0x00;        /* no output enable for nSRST */
-
-       high_output    = 0x01;
-       high_direction = 0x03;
-
-       /* initialize high byte for jtag */
-       if (ft2232_set_data_bits_high_byte(high_output, high_direction) != ERROR_OK) {
-               LOG_ERROR("couldn't initialize FT2232 with 'stm32stick' layout");
-               return ERROR_JTAG_INIT_FAILED;
-       }
-
-       return ERROR_OK;
-}
-
-static int sheevaplug_init(void)
-{
-       low_output = 0x08;
-       low_direction = 0x1b;
-
-       /* initialize low byte for jtag */
-       if (ft2232_set_data_bits_low_byte(low_output, low_direction) != ERROR_OK) {
-               LOG_ERROR("couldn't initialize FT2232 with 'sheevaplug' layout");
-               return ERROR_JTAG_INIT_FAILED;
-       }
-
-       nTRSTnOE = 0x1;
-       nTRST = 0x02;
-       nSRSTnOE = 0x4;
-       nSRST = 0x08;
-
-       high_output = 0x0;
-       high_direction = 0x0f;
-
-       /* nTRST is always push-pull */
-       high_output &= ~nTRSTnOE;
-       high_output |= nTRST;
-
-       /* nSRST is always open-drain */
-       high_output |= nSRSTnOE;
-       high_output &= ~nSRST;
-
-       /* initialize high byte for jtag */
-       if (ft2232_set_data_bits_high_byte(high_output, high_direction) != ERROR_OK) {
-               LOG_ERROR("couldn't initialize FT2232 with 'sheevaplug' layout");
-               return ERROR_JTAG_INIT_FAILED;
-       }
-
-       return ERROR_OK;
-}
-
-static int cortino_jtag_init(void)
-{
-       low_output    = 0x08;
-       low_direction = 0x1b;
-
-       /* initialize low byte for jtag */
-       if (ft2232_set_data_bits_low_byte(low_output, low_direction) != ERROR_OK) {
-               LOG_ERROR("couldn't initialize FT2232 with 'cortino' layout");
-               return ERROR_JTAG_INIT_FAILED;
-       }
-
-       nTRST    = 0x01;
-       nTRSTnOE = 0x00;        /* no output enable for nTRST */
-       nSRST    = 0x02;
-       nSRSTnOE = 0x00;        /* no output enable for nSRST */
-
-       high_output    = 0x03;
-       high_direction = 0x03;
-
-       /* initialize high byte for jtag */
-       if (ft2232_set_data_bits_high_byte(high_output, high_direction) != ERROR_OK) {
-               LOG_ERROR("couldn't initialize FT2232 with 'cortino' layout");
-               return ERROR_JTAG_INIT_FAILED;
-       }
-
-       return ERROR_OK;
-}
-
-static int lisa_l_init(void)
-{
-       ftx232_dbus_init();
-
-       nTRST    = 0x10;
-       nTRSTnOE = 0x10;
-       nSRST    = 0x40;
-       nSRSTnOE = 0x40;
-
-       high_output = 0x00;
-       high_direction = 0x18;
-
-       /* initialize high byte for jtag */
-       if (ft2232_set_data_bits_high_byte(high_output, high_direction) != ERROR_OK) {
-               LOG_ERROR("couldn't initialize FT2232 with 'lisa_l' layout");
-               return ERROR_JTAG_INIT_FAILED;
-       }
-
-       return ftx232_dbus_write();
-}
-
-static int flossjtag_init(void)
-{
-       ftx232_dbus_init();
-
-       nTRST    = 0x10;
-       nTRSTnOE = 0x10;
-       nSRST    = 0x40;
-       nSRSTnOE = 0x40;
-
-       high_output = 0x00;
-       high_direction = 0x18;
-
-       /* initialize high byte for jtag */
-       if (ft2232_set_data_bits_high_byte(high_output, high_direction) != ERROR_OK) {
-               LOG_ERROR("couldn't initialize FT2232 with 'Floss-JTAG' layout");
-               return ERROR_JTAG_INIT_FAILED;
-       }
-
-       return ftx232_dbus_write();
-}
-
-/*
- * The reference schematic from TI for the XDS100v2 has a CPLD on which opens
- * the door for a number of different configurations
- *
- * Known Implementations:
- * http://processors.wiki.ti.com/images/9/93/TMS570LS20216_USB_STICK_Schematic.pdf
- *
- * http://processors.wiki.ti.com/index.php/XDS100 (rev2)
- *     * CLPD logic: Rising edge to enable outputs (XDS100_PWR_RST)
- *             * ACBUS3 to transition 0->1 (OE rising edge)
- *     * CPLD logic: Put the EMU0/1 pins in Hi-Z:
- *             * ADBUS5/GPIOL1 = EMU_EN = 1
- *             * ADBUS6/GPIOL2 = EMU0 = 0
- *             * ACBUS4/SPARE0 = EMU1 = 0
- *     * CPLD logic: Disable loopback
- *             * ACBUS6/SPARE2 = LOOPBACK = 0
- */
-#define XDS100_nEMU_EN  (1<<5)
-#define XDS100_nEMU0    (1<<6)
-
-#define XDS100_PWR_RST  (1<<3)
-#define XDS100_nEMU1    (1<<4)
-#define XDS100_LOOPBACK (1<<6)
-static int xds100v2_init(void)
-{
-       /* These are in the lower byte */
-       nTRST    = 0x10;
-       nTRSTnOE = 0x10;
-
-       /* These aren't actually used on 14 pin connectors
-        * These are in the upper byte */
-       nSRST    = 0x01;
-       nSRSTnOE = 0x01;
-
-       low_output    = 0x08 | nTRST | XDS100_nEMU_EN;
-       low_direction = 0x0b | nTRSTnOE | XDS100_nEMU_EN | XDS100_nEMU0;
-
-       if (ft2232_set_data_bits_low_byte(low_output, low_direction) != ERROR_OK) {
-               LOG_ERROR("couldn't initialize FT2232 with 'xds100v2' layout");
-               return ERROR_JTAG_INIT_FAILED;
-       }
-
-       high_output = 0;
-       high_direction = nSRSTnOE | XDS100_LOOPBACK | XDS100_PWR_RST | XDS100_nEMU1;
-
-       /* initialize high byte for jtag */
-       if (ft2232_set_data_bits_high_byte(high_output, high_direction) != ERROR_OK) {
-               LOG_ERROR("couldn't put CPLD in to reset with 'xds100v2' layout");
-               return ERROR_JTAG_INIT_FAILED;
-       }
-
-       high_output |= XDS100_PWR_RST;
-
-       /* initialize high byte for jtag */
-       if (ft2232_set_data_bits_high_byte(high_output, high_direction) != ERROR_OK) {
-               LOG_ERROR("couldn't bring CPLD out of reset with 'xds100v2' layout");
-               return ERROR_JTAG_INIT_FAILED;
-       }
-
-       return ERROR_OK;
-}
-
-static void olimex_jtag_blink(void)
-{
-       /* Olimex ARM-USB-OCD has a LED connected to ACBUS3
-        * ACBUS3 is bit 3 of the GPIOH port
-        */
-       high_output ^= 0x08;
-
-       buffer_write(0x82);
-       buffer_write(high_output);
-       buffer_write(high_direction);
-}
-
-static void flyswatter_jtag_blink(unsigned char led)
-{
-       buffer_write(0x82);
-       buffer_write(high_output ^ led);
-       buffer_write(high_direction);
-}
-
-static void flyswatter1_jtag_blink(void)
-{
-       /*
-        * Flyswatter has two LEDs connected to ACBUS2 and ACBUS3
-        */
-       flyswatter_jtag_blink(0xc);
-}
-
-static void flyswatter2_jtag_blink(void)
-{
-       /*
-        * Flyswatter2 only has one LED connected to ACBUS2
-        */
-       flyswatter_jtag_blink(0x4);
-}
-
-static void turtle_jtag_blink(void)
-{
-       /*
-        * Turtelizer2 has two LEDs connected to ACBUS2 and ACBUS3
-        */
-       if (high_output & 0x08)
-               high_output = 0x04;
-       else
-               high_output = 0x08;
-
-       buffer_write(0x82);
-       buffer_write(high_output);
-       buffer_write(high_direction);
-}
-
-static void lisa_l_blink(void)
-{
-       /*
-        * Lisa/L has two LEDs connected to BCBUS3 and BCBUS4
-        */
-       if (high_output & 0x10)
-               high_output = 0x08;
-       else
-               high_output = 0x10;
-
-       buffer_write(0x82);
-       buffer_write(high_output);
-       buffer_write(high_direction);
-}
-
-static void flossjtag_blink(void)
-{
-       /*
-        * Floss-JTAG has two LEDs connected to ACBUS3 and ACBUS4
-        */
-       if (high_output & 0x10)
-               high_output = 0x08;
-       else
-               high_output = 0x10;
-
-       buffer_write(0x82);
-       buffer_write(high_output);
-       buffer_write(high_direction);
-}
-
-static int ft2232_quit(void)
-{
-#if BUILD_FT2232_FTD2XX == 1
-
-       FT_Close(ftdih);
-#elif BUILD_FT2232_LIBFTDI == 1
-       ftdi_usb_close(&ftdic);
-
-       ftdi_deinit(&ftdic);
-#endif
-
-       free(ft2232_buffer);
-       ft2232_buffer = NULL;
-
-       return ERROR_OK;
-}
-
-COMMAND_HANDLER(ft2232_handle_device_desc_command)
-{
-       char *cp;
-       char buf[200];
-       if (CMD_ARGC == 1) {
-               ft2232_device_desc = strdup(CMD_ARGV[0]);
-               cp = strchr(ft2232_device_desc, 0);
-               /* under Win32, the FTD2XX driver appends an "A" to the end
-                * of the description, this examines the given desc
-                * and creates the 'missing' _A or non_A variable. */
-               if ((cp[-1] == 'A') && (cp[-2] == ' ')) {
-                       /* it was, so make this the "A" version. */
-                       ft2232_device_desc_A = ft2232_device_desc;
-                       /* and *CREATE* the non-A version. */
-                       strcpy(buf, ft2232_device_desc);
-                       cp = strchr(buf, 0);
-                       cp[-2] = 0;
-                       ft2232_device_desc = strdup(buf);
-               } else {
-                       /* <space > A not defined
-                        * so create it */
-                       sprintf(buf, "%s A", ft2232_device_desc);
-                       ft2232_device_desc_A = strdup(buf);
-               }
-       } else
-               LOG_ERROR("expected exactly one argument to ft2232_device_desc <description>");
-
-       return ERROR_OK;
-}
-
-COMMAND_HANDLER(ft2232_handle_serial_command)
-{
-       if (CMD_ARGC == 1)
-               ft2232_serial = strdup(CMD_ARGV[0]);
-       else
-               return ERROR_COMMAND_SYNTAX_ERROR;
-
-       return ERROR_OK;
-}
-
-COMMAND_HANDLER(ft2232_handle_layout_command)
-{
-       if (CMD_ARGC != 1)
-               return ERROR_COMMAND_SYNTAX_ERROR;
-
-       if (layout) {
-               LOG_ERROR("already specified ft2232_layout %s",
-                       layout->name);
-               return (strcmp(layout->name, CMD_ARGV[0]) != 0)
-                      ? ERROR_FAIL
-                      : ERROR_OK;
-       }
-
-       for (const struct ft2232_layout *l = ft2232_layouts; l->name; l++) {
-               if (strcmp(l->name, CMD_ARGV[0]) == 0) {
-                       layout = l;
-                       ft2232_channel = l->channel;
-                       return ERROR_OK;
-               }
-       }
-
-       LOG_ERROR("No FT2232 layout '%s' found", CMD_ARGV[0]);
-       return ERROR_FAIL;
-}
-
-COMMAND_HANDLER(ft2232_handle_vid_pid_command)
-{
-       if (CMD_ARGC > MAX_USB_IDS * 2) {
-               LOG_WARNING("ignoring extra IDs in ft2232_vid_pid "
-                       "(maximum is %d pairs)", MAX_USB_IDS);
-               CMD_ARGC = MAX_USB_IDS * 2;
-       }
-       if (CMD_ARGC < 2 || (CMD_ARGC & 1)) {
-               LOG_WARNING("incomplete ft2232_vid_pid configuration directive");
-               if (CMD_ARGC < 2)
-                       return ERROR_COMMAND_SYNTAX_ERROR;
-               /* remove the incomplete trailing id */
-               CMD_ARGC -= 1;
-       }
-
-       unsigned i;
-       for (i = 0; i < CMD_ARGC; i += 2) {
-               COMMAND_PARSE_NUMBER(u16, CMD_ARGV[i], ft2232_vid[i >> 1]);
-               COMMAND_PARSE_NUMBER(u16, CMD_ARGV[i + 1], ft2232_pid[i >> 1]);
-       }
-
-       /*
-        * Explicitly terminate, in case there are multiples instances of
-        * ft2232_vid_pid.
-        */
-       ft2232_vid[i >> 1] = ft2232_pid[i >> 1] = 0;
-
-       return ERROR_OK;
-}
-
-COMMAND_HANDLER(ft2232_handle_latency_command)
-{
-       if (CMD_ARGC == 1)
-               ft2232_latency = atoi(CMD_ARGV[0]);
-       else
-               return ERROR_COMMAND_SYNTAX_ERROR;
-
-       return ERROR_OK;
-}
-
-COMMAND_HANDLER(ft2232_handle_channel_command)
-{
-       if (CMD_ARGC == 1) {
-               ft2232_channel = atoi(CMD_ARGV[0]);
-               if (ft2232_channel < 0 || ft2232_channel > 4)
-                       LOG_ERROR("ft2232_channel must be in the 0 to 4 range");
-       } else
-               LOG_ERROR("expected exactly one argument to ft2232_channel <ch>");
-
-       return ERROR_OK;
-}
-
-static int ft2232_stableclocks(int num_cycles, struct jtag_command *cmd)
-{
-       int retval = 0;
-
-       /* 7 bits of either ones or zeros. */
-       uint8_t tms = (tap_get_state() == TAP_RESET ? 0x7F : 0x00);
-
-       while (num_cycles > 0) {
-               /* the command 0x4b, "Clock Data to TMS/CS Pin (no Read)" handles
-                * at most 7 bits per invocation.  Here we invoke it potentially
-                * several times.
-                */
-               int bitcount_per_command = (num_cycles > 7) ? 7 : num_cycles;
-
-               if (ft2232_buffer_size + 3 >= FT2232_BUFFER_SIZE) {
-                       if (ft2232_send_and_recv(first_unsent, cmd) != ERROR_OK)
-                               retval = ERROR_JTAG_QUEUE_FAILED;
-
-                       first_unsent = cmd;
-               }
-
-               /* there are no state transitions in this code, so omit state tracking */
-
-               /* command "Clock Data to TMS/CS Pin (no Read)" */
-               buffer_write(0x4b);
-
-               /* scan 7 bit */
-               buffer_write(bitcount_per_command - 1);
-
-               /* TMS data bits are either all zeros or ones to stay in the current stable state */
-               buffer_write(tms);
-
-               require_send = 1;
-
-               num_cycles -= bitcount_per_command;
-       }
-
-       return retval;
-}
-
-/* ---------------------------------------------------------------------
- * Support for IceBear JTAG adapter from Section5:
- *     http://section5.ch/icebear
- *
- * Author: Sten, debian@sansys-electronic.com
- */
-
-/* Icebear pin layout
- *
- * ADBUS5 (nEMU) nSRST | 2   1|        GND (10k->VCC)
- * GND GND             | 4   3|        n.c.
- * ADBUS3 TMS          | 6   5|        ADBUS6 VCC
- * ADBUS0 TCK          | 8   7|        ADBUS7 (GND)
- * ADBUS4 nTRST                |10   9|        ACBUS0 (GND)
- * ADBUS1 TDI          |12  11|        ACBUS1 (GND)
- * ADBUS2 TDO          |14  13|        GND GND
- *
- * ADBUS0 O L TCK              ACBUS0 GND
- * ADBUS1 O L TDI              ACBUS1 GND
- * ADBUS2 I   TDO              ACBUS2 n.c.
- * ADBUS3 O H TMS              ACBUS3 n.c.
- * ADBUS4 O H nTRST
- * ADBUS5 O H nSRST
- * ADBUS6 -   VCC
- * ADBUS7 -   GND
- */
-static int icebear_jtag_init(void)
-{
-       low_direction   = 0x0b; /* output: TCK TDI TMS; input: TDO */
-       low_output      = 0x08; /* high: TMS; low: TCK TDI */
-       nTRST           = 0x10;
-       nSRST           = 0x20;
-
-       enum reset_types jtag_reset_config = jtag_get_reset_config();
-       if ((jtag_reset_config & RESET_TRST_OPEN_DRAIN) != 0)
-               low_direction   &= ~nTRST;      /* nTRST high impedance */
-       else {
-               low_direction   |= nTRST;
-               low_output      |= nTRST;
-       }
-
-       low_direction   |= nSRST;
-       low_output      |= nSRST;
-
-       /* initialize low byte for jtag */
-       if (ft2232_set_data_bits_low_byte(low_output, low_direction) != ERROR_OK) {
-               LOG_ERROR("couldn't initialize FT2232 with 'IceBear' layout (low)");
-               return ERROR_JTAG_INIT_FAILED;
-       }
-
-       high_output    = 0x0;
-       high_direction = 0x00;
-
-       /* initialize high byte for jtag */
-       if (ft2232_set_data_bits_high_byte(high_output, high_direction) != ERROR_OK) {
-               LOG_ERROR("couldn't initialize FT2232 with 'IceBear' layout (high)");
-               return ERROR_JTAG_INIT_FAILED;
-       }
-
-       return ERROR_OK;
-}
-
-static void icebear_jtag_reset(int trst, int srst)
-{
-       if (trst == 1) {
-               low_direction   |= nTRST;
-               low_output      &= ~nTRST;
-       } else if (trst == 0) {
-               enum reset_types jtag_reset_config = jtag_get_reset_config();
-               if ((jtag_reset_config & RESET_TRST_OPEN_DRAIN) != 0)
-                       low_direction   &= ~nTRST;
-               else
-                       low_output      |= nTRST;
-       }
-
-       if (srst == 1)
-               low_output &= ~nSRST;
-       else if (srst == 0)
-               low_output |= nSRST;
-
-       /* command "set data bits low byte" */
-       buffer_write(0x80);
-       buffer_write(low_output);
-       buffer_write(low_direction);
-
-       LOG_DEBUG("trst: %i, srst: %i, low_output: 0x%2.2x, low_direction: 0x%2.2x",
-               trst,
-               srst,
-               low_output,
-               low_direction);
-}
-
-/* ---------------------------------------------------------------------
- * Support for Signalyzer H2 and Signalyzer H4
- * JTAG adapter from Xverve Technologies Inc.
- * http://www.signalyzer.com or http://www.xverve.com
- *
- * Author: Oleg Seiljus, oleg@signalyzer.com
- */
-static unsigned char signalyzer_h_side;
-static unsigned int signalyzer_h_adapter_type;
-
-static int signalyzer_h_ctrl_write(int address, unsigned short value);
-
-#if BUILD_FT2232_FTD2XX == 1
-static int signalyzer_h_ctrl_read(int address, unsigned short *value);
-#endif
-
-#define SIGNALYZER_COMMAND_ADDR                                        128
-#define SIGNALYZER_DATA_BUFFER_ADDR                            129
-
-#define SIGNALYZER_COMMAND_VERSION                             0x41
-#define SIGNALYZER_COMMAND_RESET                               0x42
-#define SIGNALYZER_COMMAND_POWERCONTROL_GET            0x50
-#define SIGNALYZER_COMMAND_POWERCONTROL_SET            0x51
-#define SIGNALYZER_COMMAND_PWM_SET                             0x52
-#define SIGNALYZER_COMMAND_LED_SET                             0x53
-#define SIGNALYZER_COMMAND_ADC                                 0x54
-#define SIGNALYZER_COMMAND_GPIO_STATE                  0x55
-#define SIGNALYZER_COMMAND_GPIO_MODE                   0x56
-#define SIGNALYZER_COMMAND_GPIO_PORT                   0x57
-#define SIGNALYZER_COMMAND_I2C                                 0x58
-
-#define SIGNALYZER_CHAN_A                                              1
-#define SIGNALYZER_CHAN_B                                              2
-/* LEDS use channel C */
-#define SIGNALYZER_CHAN_C                                              4
-
-#define SIGNALYZER_LED_GREEN                                   1
-#define SIGNALYZER_LED_RED                                             2
-
-#define SIGNALYZER_MODULE_TYPE_EM_LT16_A               0x0301
-#define SIGNALYZER_MODULE_TYPE_EM_ARM_JTAG             0x0302
-#define SIGNALYZER_MODULE_TYPE_EM_JTAG                 0x0303
-#define SIGNALYZER_MODULE_TYPE_EM_ARM_JTAG_P   0x0304
-#define SIGNALYZER_MODULE_TYPE_EM_JTAG_P               0x0305
-
-
-static int signalyzer_h_ctrl_write(int address, unsigned short value)
-{
-#if BUILD_FT2232_FTD2XX == 1
-       return FT_WriteEE(ftdih, address, value);
-#elif BUILD_FT2232_LIBFTDI == 1
-       return 0;
-#endif
-}
-
-#if BUILD_FT2232_FTD2XX == 1
-static int signalyzer_h_ctrl_read(int address, unsigned short *value)
-{
-       return FT_ReadEE(ftdih, address, value);
-}
-#endif
-
-static int signalyzer_h_led_set(unsigned char channel, unsigned char led,
-       int on_time_ms, int off_time_ms, unsigned char cycles)
-{
-       unsigned char on_time;
-       unsigned char off_time;
-
-       if (on_time_ms < 0xFFFF)
-               on_time = (unsigned char)(on_time_ms / 62);
-       else
-               on_time = 0xFF;
-
-       off_time = (unsigned char)(off_time_ms / 62);
-
-#if BUILD_FT2232_FTD2XX == 1
-       FT_STATUS status;
-
-       status = signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR,
-                       ((uint32_t)(channel << 8) | led));
-       if (status != FT_OK) {
-               LOG_ERROR("signalyzer_h_ctrl_write  returned: %s",
-                       ftd2xx_status_string(status));
-               return ERROR_JTAG_DEVICE_ERROR;
-       }
-
-       status = signalyzer_h_ctrl_write((SIGNALYZER_DATA_BUFFER_ADDR + 1),
-                       ((uint32_t)(on_time << 8) | off_time));
-       if (status != FT_OK) {
-               LOG_ERROR("signalyzer_h_ctrl_write  returned: %s",
-                       ftd2xx_status_string(status));
-               return ERROR_JTAG_DEVICE_ERROR;
-       }
-
-       status = signalyzer_h_ctrl_write((SIGNALYZER_DATA_BUFFER_ADDR + 2),
-                       ((uint32_t)cycles));
-       if (status != FT_OK) {
-               LOG_ERROR("signalyzer_h_ctrl_write  returned: %s",
-                       ftd2xx_status_string(status));
-               return ERROR_JTAG_DEVICE_ERROR;
-       }
-
-       status = signalyzer_h_ctrl_write(SIGNALYZER_COMMAND_ADDR,
-                               SIGNALYZER_COMMAND_LED_SET);
-       if (status != FT_OK) {
-               LOG_ERROR("signalyzer_h_ctrl_write  returned: %s",
-                       ftd2xx_status_string(status));
-               return ERROR_JTAG_DEVICE_ERROR;
-       }
-
-       return ERROR_OK;
-#elif BUILD_FT2232_LIBFTDI == 1
-       int retval;
-
-       retval = signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR,
-                               ((uint32_t)(channel << 8) | led));
-       if (retval < 0) {
-               LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
-                       ftdi_get_error_string(&ftdic));
-               return ERROR_JTAG_DEVICE_ERROR;
-       }
-
-       retval = signalyzer_h_ctrl_write((SIGNALYZER_DATA_BUFFER_ADDR + 1),
-                       ((uint32_t)(on_time << 8) | off_time));
-       if (retval < 0) {
-               LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
-                       ftdi_get_error_string(&ftdic));
-               return ERROR_JTAG_DEVICE_ERROR;
-       }
-
-       retval = signalyzer_h_ctrl_write((SIGNALYZER_DATA_BUFFER_ADDR + 2),
-                       (uint32_t)cycles);
-       if (retval < 0) {
-               LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
-                       ftdi_get_error_string(&ftdic));
-               return ERROR_JTAG_DEVICE_ERROR;
-       }
-
-       retval = signalyzer_h_ctrl_write(SIGNALYZER_COMMAND_ADDR,
-                       SIGNALYZER_COMMAND_LED_SET);
-       if (retval < 0) {
-               LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
-                       ftdi_get_error_string(&ftdic));
-               return ERROR_JTAG_DEVICE_ERROR;
-       }
-
-       return ERROR_OK;
-#endif
-}
-
-static int signalyzer_h_init(void)
-{
-#if BUILD_FT2232_FTD2XX == 1
-       FT_STATUS status;
-       int i;
-#endif
-
-       char *end_of_desc;
-
-       uint16_t read_buf[12] = { 0 };
-
-       /* turn on center green led */
-       signalyzer_h_led_set(SIGNALYZER_CHAN_C, SIGNALYZER_LED_GREEN,
-               0xFFFF, 0x00, 0x00);
-
-       /* determine what channel config wants to open
-        * TODO: change me... current implementation is made to work
-        * with openocd description parsing.
-        */
-       end_of_desc = strrchr(ft2232_device_desc, 0x00);
-
-       if (end_of_desc) {
-               signalyzer_h_side = *(end_of_desc - 1);
-               if (signalyzer_h_side == 'B')
-                       signalyzer_h_side = SIGNALYZER_CHAN_B;
-               else
-                       signalyzer_h_side = SIGNALYZER_CHAN_A;
-       } else {
-               LOG_ERROR("No Channel was specified");
-               return ERROR_FAIL;
-       }
-
-       signalyzer_h_led_set(signalyzer_h_side, SIGNALYZER_LED_GREEN,
-               1000, 1000, 0xFF);
-
-#if BUILD_FT2232_FTD2XX == 1
-       /* read signalyzer versionining information */
-       status = signalyzer_h_ctrl_write(SIGNALYZER_COMMAND_ADDR,
-                       SIGNALYZER_COMMAND_VERSION);
-       if (status != FT_OK) {
-               LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
-                       ftd2xx_status_string(status));
-               return ERROR_JTAG_DEVICE_ERROR;
-       }
-
-       for (i = 0; i < 10; i++) {
-               status = signalyzer_h_ctrl_read((SIGNALYZER_DATA_BUFFER_ADDR + i),
-                               &read_buf[i]);
-               if (status != FT_OK) {
-                       LOG_ERROR("signalyzer_h_ctrl_read returned: %s",
-                               ftd2xx_status_string(status));
-                       return ERROR_JTAG_DEVICE_ERROR;
-               }
-       }
-
-       LOG_INFO("Signalyzer: ID info: { %.4x %.4x %.4x %.4x %.4x %.4x %.4x }",
-               read_buf[0], read_buf[1], read_buf[2], read_buf[3],
-               read_buf[4], read_buf[5], read_buf[6]);
-
-       /* set gpio register */
-       status = signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR,
-                       (uint32_t)(signalyzer_h_side << 8));
-       if (status != FT_OK) {
-               LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
-                       ftd2xx_status_string(status));
-               return ERROR_JTAG_DEVICE_ERROR;
-       }
-
-       status = signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR + 1, 0x0404);
-       if (status != FT_OK) {
-               LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
-                       ftd2xx_status_string(status));
-               return ERROR_JTAG_DEVICE_ERROR;
-       }
-
-       status = signalyzer_h_ctrl_write(SIGNALYZER_COMMAND_ADDR,
-                       SIGNALYZER_COMMAND_GPIO_STATE);
-       if (status != FT_OK) {
-               LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
-                       ftd2xx_status_string(status));
-               return ERROR_JTAG_DEVICE_ERROR;
-       }
-
-       /* read adapter type information */
-       status = signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR,
-                       ((uint32_t)(signalyzer_h_side << 8) | 0x01));
-       if (status != FT_OK) {
-               LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
-                       ftd2xx_status_string(status));
-               return ERROR_JTAG_DEVICE_ERROR;
-       }
-
-       status = signalyzer_h_ctrl_write(
-                       (SIGNALYZER_DATA_BUFFER_ADDR + 1), 0xA000);
-       if (status != FT_OK) {
-               LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
-                       ftd2xx_status_string(status));
-               return ERROR_JTAG_DEVICE_ERROR;
-       }
-
-       status = signalyzer_h_ctrl_write(
-                       (SIGNALYZER_DATA_BUFFER_ADDR + 2), 0x0008);
-       if (status != FT_OK) {
-               LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
-                       ftd2xx_status_string(status));
-               return ERROR_JTAG_DEVICE_ERROR;
-       }
-
-       status = signalyzer_h_ctrl_write(SIGNALYZER_COMMAND_ADDR,
-                       SIGNALYZER_COMMAND_I2C);
-       if (status != FT_OK) {
-               LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
-                       ftd2xx_status_string(status));
-               return ERROR_JTAG_DEVICE_ERROR;
-       }
-
-       usleep(100000);
-
-       status = signalyzer_h_ctrl_read(SIGNALYZER_COMMAND_ADDR, &read_buf[0]);
-       if (status != FT_OK) {
-               LOG_ERROR("signalyzer_h_ctrl_read returned: %s",
-                       ftd2xx_status_string(status));
-               return ERROR_JTAG_DEVICE_ERROR;
-       }
-
-       if (read_buf[0] != 0x0498)
-               signalyzer_h_adapter_type = 0x0000;
-       else {
-               for (i = 0; i < 4; i++) {
-                       status = signalyzer_h_ctrl_read((SIGNALYZER_DATA_BUFFER_ADDR + i), &read_buf[i]);
-                       if (status != FT_OK) {
-                               LOG_ERROR("signalyzer_h_ctrl_read returned: %s",
-                                       ftd2xx_status_string(status));
-                               return ERROR_JTAG_DEVICE_ERROR;
-                       }
-               }
-
-               signalyzer_h_adapter_type = read_buf[0];
-       }
-
-#elif BUILD_FT2232_LIBFTDI == 1
-       /* currently libftdi does not allow reading individual eeprom
-        * locations, therefore adapter type cannot be detected.
-        * override with most common type
-        */
-       signalyzer_h_adapter_type = SIGNALYZER_MODULE_TYPE_EM_ARM_JTAG;
-#endif
-
-       enum reset_types jtag_reset_config = jtag_get_reset_config();
-
-       /* ADAPTOR: EM_LT16_A */
-       if (signalyzer_h_adapter_type == SIGNALYZER_MODULE_TYPE_EM_LT16_A) {
-               LOG_INFO("Signalyzer: EM-LT (16-channel level translator) "
-                       "detected. (HW: %2x).", (read_buf[1] >> 8));
-
-               nTRST    = 0x10;
-               nTRSTnOE = 0x10;
-               nSRST    = 0x20;
-               nSRSTnOE = 0x20;
-
-               low_output     = 0x08;
-               low_direction  = 0x1b;
-
-               high_output    = 0x0;
-               high_direction = 0x0;
-
-               if (jtag_reset_config & RESET_TRST_OPEN_DRAIN) {
-                       low_direction &= ~nTRSTnOE;     /* nTRST input */
-                       low_output    &= ~nTRST;        /* nTRST = 0 */
-               } else {
-                       low_direction |= nTRSTnOE;      /* nTRST output */
-                       low_output    |= nTRST;         /* nTRST = 1 */
-               }
-
-               if (jtag_reset_config & RESET_SRST_PUSH_PULL) {
-                       low_direction |= nSRSTnOE;      /* nSRST output */
-                       low_output    |= nSRST;         /* nSRST = 1 */
-               } else {
-                       low_direction &= ~nSRSTnOE;     /* nSRST input */
-                       low_output    &= ~nSRST;        /* nSRST = 0 */
-               }
-
-#if BUILD_FT2232_FTD2XX == 1
-               /* enable power to the module */
-               status = signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR,
-                               ((uint32_t)(signalyzer_h_side << 8) | 0x01));
-               if (status != FT_OK) {
-                       LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
-                               ftd2xx_status_string(status));
-                       return ERROR_JTAG_DEVICE_ERROR;
-               }
-
-               status = signalyzer_h_ctrl_write(SIGNALYZER_COMMAND_ADDR,
-                               SIGNALYZER_COMMAND_POWERCONTROL_SET);
-               if (status != FT_OK) {
-                       LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
-                               ftd2xx_status_string(status));
-                       return ERROR_JTAG_DEVICE_ERROR;
-               }
-
-               /* set gpio mode register */
-               status = signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR,
-                               (uint32_t)(signalyzer_h_side << 8));
-               if (status != FT_OK) {
-                       LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
-                               ftd2xx_status_string(status));
-                       return ERROR_JTAG_DEVICE_ERROR;
-               }
-
-               status = signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR + 1, 0x0000);
-               if (status != FT_OK) {
-                       LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
-                               ftd2xx_status_string(status));
-                       return ERROR_JTAG_DEVICE_ERROR;
-               }
-
-               status = signalyzer_h_ctrl_write(SIGNALYZER_COMMAND_ADDR, SIGNALYZER_COMMAND_GPIO_MODE);
-               if (status != FT_OK) {
-                       LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
-                               ftd2xx_status_string(status));
-                       return ERROR_JTAG_DEVICE_ERROR;
-               }
-
-               /* set gpio register */
-               status = signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR,
-                               (uint32_t)(signalyzer_h_side << 8));
-               if (status != FT_OK) {
-                       LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
-                               ftd2xx_status_string(status));
-                       return ERROR_JTAG_DEVICE_ERROR;
-               }
-
-               status = signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR + 1, 0x4040);
-               if (status != FT_OK) {
-                       LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
-                               ftd2xx_status_string(status));
-                       return ERROR_JTAG_DEVICE_ERROR;
-               }
-
-               status = signalyzer_h_ctrl_write(SIGNALYZER_COMMAND_ADDR,
-                               SIGNALYZER_COMMAND_GPIO_STATE);
-               if (status != FT_OK) {
-                       LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
-                               ftd2xx_status_string(status));
-                       return ERROR_JTAG_DEVICE_ERROR;
-               }
-#endif
-       }
-       /* ADAPTOR: EM_ARM_JTAG, EM_ARM_JTAG_P, EM_JTAG, EM_JTAG_P */
-       else if ((signalyzer_h_adapter_type == SIGNALYZER_MODULE_TYPE_EM_ARM_JTAG) ||
-                (signalyzer_h_adapter_type == SIGNALYZER_MODULE_TYPE_EM_ARM_JTAG_P) ||
-                (signalyzer_h_adapter_type == SIGNALYZER_MODULE_TYPE_EM_JTAG)  ||
-                (signalyzer_h_adapter_type == SIGNALYZER_MODULE_TYPE_EM_JTAG_P)) {
-               if (signalyzer_h_adapter_type
-                   == SIGNALYZER_MODULE_TYPE_EM_ARM_JTAG)
-                       LOG_INFO("Signalyzer: EM-ARM-JTAG (ARM JTAG) "
-                               "detected. (HW: %2x).", (read_buf[1] >> 8));
-               else if (signalyzer_h_adapter_type
-                        == SIGNALYZER_MODULE_TYPE_EM_ARM_JTAG_P)
-                       LOG_INFO("Signalyzer: EM-ARM-JTAG_P "
-                               "(ARM JTAG with PSU) detected. (HW: %2x).",
-                               (read_buf[1] >> 8));
-               else if (signalyzer_h_adapter_type
-                        == SIGNALYZER_MODULE_TYPE_EM_JTAG)
-                       LOG_INFO("Signalyzer: EM-JTAG (Generic JTAG) "
-                               "detected. (HW: %2x).", (read_buf[1] >> 8));
-               else if (signalyzer_h_adapter_type
-                        == SIGNALYZER_MODULE_TYPE_EM_JTAG_P)
-                       LOG_INFO("Signalyzer: EM-JTAG-P "
-                               "(Generic JTAG with PSU) detected. (HW: %2x).",
-                               (read_buf[1] >> 8));
-
-               nTRST          = 0x02;
-               nTRSTnOE       = 0x04;
-               nSRST          = 0x08;
-               nSRSTnOE       = 0x10;
-
-               low_output     = 0x08;
-               low_direction  = 0x1b;
-
-               high_output    = 0x0;
-               high_direction = 0x1f;
-
-               if (jtag_reset_config & RESET_TRST_OPEN_DRAIN) {
-                       high_output |= nTRSTnOE;
-                       high_output &= ~nTRST;
-               } else {
-                       high_output &= ~nTRSTnOE;
-                       high_output |= nTRST;
-               }
-
-               if (jtag_reset_config & RESET_SRST_PUSH_PULL) {
-                       high_output &= ~nSRSTnOE;
-                       high_output |= nSRST;
-               } else {
-                       high_output |= nSRSTnOE;
-                       high_output &= ~nSRST;
-               }
-
-#if BUILD_FT2232_FTD2XX == 1
-               /* enable power to the module */
-               status = signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR,
-                               ((uint32_t)(signalyzer_h_side << 8) | 0x01));
-               if (status != FT_OK) {
-                       LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
-                               ftd2xx_status_string(status));
-                       return ERROR_JTAG_DEVICE_ERROR;
-               }
-
-               status = signalyzer_h_ctrl_write(SIGNALYZER_COMMAND_ADDR,
-                               SIGNALYZER_COMMAND_POWERCONTROL_SET);
-               if (status != FT_OK) {
-                       LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
-                               ftd2xx_status_string(status));
-                       return ERROR_JTAG_DEVICE_ERROR;
-               }
-
-               /* set gpio mode register (IO_16 and IO_17 set as analog
-                * inputs, other is gpio)
-                */
-               status = signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR,
-                               (uint32_t)(signalyzer_h_side << 8));
-               if (status != FT_OK) {
-                       LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
-                               ftd2xx_status_string(status));
-                       return ERROR_JTAG_DEVICE_ERROR;
-               }
-
-               status = signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR + 1, 0x0060);
-               if (status != FT_OK) {
-                       LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
-                               ftd2xx_status_string(status));
-                       return ERROR_JTAG_DEVICE_ERROR;
-               }
-
-               status = signalyzer_h_ctrl_write(SIGNALYZER_COMMAND_ADDR, SIGNALYZER_COMMAND_GPIO_MODE);
-               if (status != FT_OK) {
-                       LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
-                               ftd2xx_status_string(status));
-                       return ERROR_JTAG_DEVICE_ERROR;
-               }
-
-               /* set gpio register (all inputs, for -P modules,
-                * PSU will be turned off)
-                */
-               status = signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR,
-                               (uint32_t)(signalyzer_h_side << 8));
-               if (status != FT_OK) {
-                       LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
-                               ftd2xx_status_string(status));
-                       return ERROR_JTAG_DEVICE_ERROR;
-               }
-
-               status = signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR + 1, 0x0000);
-               if (status != FT_OK) {
-                       LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
-                               ftd2xx_status_string(status));
-                       return ERROR_JTAG_DEVICE_ERROR;
-               }
-
-               status = signalyzer_h_ctrl_write(SIGNALYZER_COMMAND_ADDR, SIGNALYZER_COMMAND_GPIO_STATE);
-               if (status != FT_OK) {
-                       LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
-                               ftd2xx_status_string(status));
-                       return ERROR_JTAG_DEVICE_ERROR;
-               }
-#endif
-       } else if (signalyzer_h_adapter_type == 0x0000) {
-               LOG_INFO("Signalyzer: No external modules were detected.");
-
-               nTRST    = 0x10;
-               nTRSTnOE = 0x10;
-               nSRST    = 0x20;
-               nSRSTnOE = 0x20;
-
-               low_output     = 0x08;
-               low_direction  = 0x1b;
-
-               high_output    = 0x0;
-               high_direction = 0x0;
-
-               if (jtag_reset_config & RESET_TRST_OPEN_DRAIN) {
-                       low_direction &= ~nTRSTnOE;     /* nTRST input */
-                       low_output    &= ~nTRST;        /* nTRST = 0 */
-               } else {
-                       low_direction |= nTRSTnOE;      /* nTRST output */
-                       low_output    |= nTRST;         /* nTRST = 1 */
-               }
-
-               if (jtag_reset_config & RESET_SRST_PUSH_PULL) {
-                       low_direction |= nSRSTnOE;      /* nSRST output */
-                       low_output    |= nSRST;         /* nSRST = 1 */
-               } else {
-                       low_direction &= ~nSRSTnOE;     /* nSRST input */
-                       low_output    &= ~nSRST;        /* nSRST = 0 */
-               }
-       } else {
-               LOG_ERROR("Unknown module type is detected: %.4x",
-                       signalyzer_h_adapter_type);
-               return ERROR_JTAG_DEVICE_ERROR;
-       }
-
-       /* initialize low byte of controller for jtag operation */
-       if (ft2232_set_data_bits_low_byte(low_output, low_direction) != ERROR_OK) {
-               LOG_ERROR("couldn't initialize Signalyzer-H layout");
-               return ERROR_JTAG_INIT_FAILED;
-       }
-
-#if BUILD_FT2232_FTD2XX == 1
-       if (ftdi_device == FT_DEVICE_2232H) {
-               /* initialize high byte of controller for jtag operation */
-               if (ft2232_set_data_bits_high_byte(high_output, high_direction) != ERROR_OK) {
-                       LOG_ERROR("couldn't initialize Signalyzer-H layout");
-                       return ERROR_JTAG_INIT_FAILED;
-               }
-       }
-#elif BUILD_FT2232_LIBFTDI == 1
-       if (ftdi_device == TYPE_2232H) {
-               /* initialize high byte of controller for jtag operation */
-               if (ft2232_set_data_bits_high_byte(high_output, high_direction) != ERROR_OK) {
-                       LOG_ERROR("couldn't initialize Signalyzer-H layout");
-                       return ERROR_JTAG_INIT_FAILED;
-               }
-       }
-#endif
-       return ERROR_OK;
-}
-
-static void signalyzer_h_reset(int trst, int srst)
-{
-       enum reset_types jtag_reset_config = jtag_get_reset_config();
-
-       /* ADAPTOR: EM_LT16_A */
-       if (signalyzer_h_adapter_type == SIGNALYZER_MODULE_TYPE_EM_LT16_A) {
-               if (trst == 1) {
-                       if (jtag_reset_config & RESET_TRST_OPEN_DRAIN)
-                               /* switch to output pin (output is low) */
-                               low_direction |= nTRSTnOE;
-                       else
-                               /* switch output low */
-                               low_output &= ~nTRST;
-               } else if (trst == 0) {
-                       if (jtag_reset_config & RESET_TRST_OPEN_DRAIN)
-                               /* switch to input pin (high-Z + internal
-                                * and external pullup) */
-                               low_direction &= ~nTRSTnOE;
-                       else
-                               /* switch output high */
-                               low_output |= nTRST;
-               }
-
-               if (srst == 1) {
-                       if (jtag_reset_config & RESET_SRST_PUSH_PULL)
-                               /* switch output low */
-                               low_output &= ~nSRST;
-                       else
-                               /* switch to output pin (output is low) */
-                               low_direction |= nSRSTnOE;
-               } else if (srst == 0) {
-                       if (jtag_reset_config & RESET_SRST_PUSH_PULL)
-                               /* switch output high */
-                               low_output |= nSRST;
-                       else
-                               /* switch to input pin (high-Z) */
-                               low_direction &= ~nSRSTnOE;
-               }
-
-               /* command "set data bits low byte" */
-               buffer_write(0x80);
-               buffer_write(low_output);
-               buffer_write(low_direction);
-               LOG_DEBUG("trst: %i, srst: %i, low_output: 0x%2.2x, "
-                       "low_direction: 0x%2.2x",
-                       trst, srst, low_output, low_direction);
-       }
-       /* ADAPTOR: EM_ARM_JTAG,  EM_ARM_JTAG_P, EM_JTAG, EM_JTAG_P */
-       else if ((signalyzer_h_adapter_type == SIGNALYZER_MODULE_TYPE_EM_ARM_JTAG) ||
-                (signalyzer_h_adapter_type == SIGNALYZER_MODULE_TYPE_EM_ARM_JTAG_P) ||
-                (signalyzer_h_adapter_type == SIGNALYZER_MODULE_TYPE_EM_JTAG)  ||
-                (signalyzer_h_adapter_type == SIGNALYZER_MODULE_TYPE_EM_JTAG_P)) {
-               if (trst == 1) {
-                       if (jtag_reset_config & RESET_TRST_OPEN_DRAIN)
-                               high_output &= ~nTRSTnOE;
-                       else
-                               high_output &= ~nTRST;
-               } else if (trst == 0) {
-                       if (jtag_reset_config & RESET_TRST_OPEN_DRAIN)
-                               high_output |= nTRSTnOE;
-                       else
-                               high_output |= nTRST;
-               }
-
-               if (srst == 1) {
-                       if (jtag_reset_config & RESET_SRST_PUSH_PULL)
-                               high_output &= ~nSRST;
-                       else
-                               high_output &= ~nSRSTnOE;
-               } else if (srst == 0) {
-                       if (jtag_reset_config & RESET_SRST_PUSH_PULL)
-                               high_output |= nSRST;
-                       else
-                               high_output |= nSRSTnOE;
-               }
-
-               /* command "set data bits high byte" */
-               buffer_write(0x82);
-               buffer_write(high_output);
-               buffer_write(high_direction);
-               LOG_INFO("trst: %i, srst: %i, high_output: 0x%2.2x, "
-                       "high_direction: 0x%2.2x",
-                       trst, srst, high_output, high_direction);
-       } else if (signalyzer_h_adapter_type == 0x0000) {
-               if (trst == 1) {
-                       if (jtag_reset_config & RESET_TRST_OPEN_DRAIN)
-                               /* switch to output pin (output is low) */
-                               low_direction |= nTRSTnOE;
-                       else
-                               /* switch output low */
-                               low_output &= ~nTRST;
-               } else if (trst == 0) {
-                       if (jtag_reset_config & RESET_TRST_OPEN_DRAIN)
-                               /* switch to input pin (high-Z + internal
-                                * and external pullup) */
-                               low_direction &= ~nTRSTnOE;
-                       else
-                               /* switch output high */
-                               low_output |= nTRST;
-               }
-
-               if (srst == 1) {
-                       if (jtag_reset_config & RESET_SRST_PUSH_PULL)
-                               /* switch output low */
-                               low_output &= ~nSRST;
-                       else
-                               /* switch to output pin (output is low) */
-                               low_direction |= nSRSTnOE;
-               } else if (srst == 0) {
-                       if (jtag_reset_config & RESET_SRST_PUSH_PULL)
-                               /* switch output high */
-                               low_output |= nSRST;
-                       else
-                               /* switch to input pin (high-Z) */
-                               low_direction &= ~nSRSTnOE;
-               }
-
-               /* command "set data bits low byte" */
-               buffer_write(0x80);
-               buffer_write(low_output);
-               buffer_write(low_direction);
-               LOG_DEBUG("trst: %i, srst: %i, low_output: 0x%2.2x, "
-                       "low_direction: 0x%2.2x",
-                       trst, srst, low_output, low_direction);
-       }
-}
-
-static void signalyzer_h_blink(void)
-{
-       signalyzer_h_led_set(signalyzer_h_side, SIGNALYZER_LED_RED, 100, 0, 1);
-}
-
-/********************************************************************
- * Support for KT-LINK
- * JTAG adapter from KRISTECH
- * http://www.kristech.eu
- *******************************************************************/
-static int ktlink_init(void)
-{
-       uint8_t swd_en = 0x20;  /* 0x20 SWD disable, 0x00 SWD enable (ADBUS5) */
-
-       low_output    = 0x08 | swd_en;  /* value; TMS=1,TCK=0,TDI=0,SWD=swd_en */
-       low_direction = 0x3B;           /* out=1; TCK/TDI/TMS=out,TDO=in,SWD=out,RTCK=in,SRSTIN=in */
-
-       /* initialize low byte for jtag */
-       if (ft2232_set_data_bits_low_byte(low_output, low_direction) != ERROR_OK) {
-               LOG_ERROR("couldn't initialize FT2232 with 'ktlink' layout");
-               return ERROR_JTAG_INIT_FAILED;
-       }
-
-       nTRST    = 0x01;
-       nSRST    = 0x02;
-       nTRSTnOE = 0x04;
-       nSRSTnOE = 0x08;
-
-       high_output    = 0x80;  /* turn LED on */
-       high_direction = 0xFF;  /* all outputs */
-
-       enum reset_types jtag_reset_config = jtag_get_reset_config();
-
-       if (jtag_reset_config & RESET_TRST_OPEN_DRAIN) {
-               high_output |= nTRSTnOE;
-               high_output &= ~nTRST;
-       } else {
-               high_output &= ~nTRSTnOE;
-               high_output |= nTRST;
-       }
-
-       if (jtag_reset_config & RESET_SRST_PUSH_PULL) {
-               high_output &= ~nSRSTnOE;
-               high_output |= nSRST;
-       } else {
-               high_output |= nSRSTnOE;
-               high_output &= ~nSRST;
-       }
-
-       /* initialize high byte for jtag */
-       if (ft2232_set_data_bits_high_byte(high_output, high_direction) != ERROR_OK) {
-               LOG_ERROR("couldn't initialize FT2232 with 'ktlink' layout");
-               return ERROR_JTAG_INIT_FAILED;
-       }
-
-       return ERROR_OK;
-}
-
-static void ktlink_reset(int trst, int srst)
-{
-       enum reset_types jtag_reset_config = jtag_get_reset_config();
-
-       if (trst == 1) {
-               if (jtag_reset_config & RESET_TRST_OPEN_DRAIN)
-                       high_output &= ~nTRSTnOE;
-               else
-                       high_output &= ~nTRST;
-       } else if (trst == 0) {
-               if (jtag_reset_config & RESET_TRST_OPEN_DRAIN)
-                       high_output |= nTRSTnOE;
-               else
-                       high_output |= nTRST;
-       }
-
-       if (srst == 1) {
-               if (jtag_reset_config & RESET_SRST_PUSH_PULL)
-                       high_output &= ~nSRST;
-               else
-                       high_output &= ~nSRSTnOE;
-       } else if (srst == 0) {
-               if (jtag_reset_config & RESET_SRST_PUSH_PULL)
-                       high_output |= nSRST;
-               else
-                       high_output |= nSRSTnOE;
-       }
-
-       buffer_write(0x82);     /* command "set data bits high byte" */
-       buffer_write(high_output);
-       buffer_write(high_direction);
-       LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x",
-               trst,
-               srst,
-               high_output,
-               high_direction);
-}
-
-static void ktlink_blink(void)
-{
-       /* LED connected to ACBUS7 */
-       high_output ^= 0x80;
-
-       buffer_write(0x82);     /* command "set data bits high byte" */
-       buffer_write(high_output);
-       buffer_write(high_direction);
-}
-
-/********************************************************************
- * Support for Digilent HS-1
- * JTAG adapter from Digilent
- * http://www.digilent.com
- * Author: Stephane Bonnet bonnetst@hds.utc.fr
- *******************************************************************/
-
-static int digilent_hs1_init(void)
-{
-       /* the adapter only supports the base JTAG signals, no nTRST
-          nor nSRST */
-       low_output      = 0x88;
-       low_direction   = 0x8b;
-
-       /* initialize low byte for jtag */
-       if (ft2232_set_data_bits_low_byte(low_output, low_direction) != ERROR_OK) {
-               LOG_ERROR("couldn't initialize FT2232 with 'digilent_hs1' layout");
-               return ERROR_JTAG_INIT_FAILED;
-       }
-       return ERROR_OK;
-}
-
-static void digilent_hs1_reset(int trst, int srst)
-{
-       /* Dummy function, no reset signals supported. */
-}
-
-static const struct command_registration ft2232_command_handlers[] = {
-       {
-               .name = "ft2232_device_desc",
-               .handler = &ft2232_handle_device_desc_command,
-               .mode = COMMAND_CONFIG,
-               .help = "set the USB device description of the FTDI FT2232 device",
-               .usage = "description_string",
-       },
-       {
-               .name = "ft2232_serial",
-               .handler = &ft2232_handle_serial_command,
-               .mode = COMMAND_CONFIG,
-               .help = "set the serial number of the FTDI FT2232 device",
-               .usage = "serial_string",
-       },
-       {
-               .name = "ft2232_layout",
-               .handler = &ft2232_handle_layout_command,
-               .mode = COMMAND_CONFIG,
-               .help = "set the layout of the FT2232 GPIO signals used "
-                       "to control output-enables and reset signals",
-               .usage = "layout_name",
-       },
-       {
-               .name = "ft2232_vid_pid",
-               .handler = &ft2232_handle_vid_pid_command,
-               .mode = COMMAND_CONFIG,
-               .help = "the vendor ID and product ID of the FTDI FT2232 device",
-               .usage = "(vid pid)* ",
-       },
-       {
-               .name = "ft2232_latency",
-               .handler = &ft2232_handle_latency_command,
-               .mode = COMMAND_CONFIG,
-               .help = "set the FT2232 latency timer to a new value",
-               .usage = "value",
-       },
-       {
-               .name = "ft2232_channel",
-               .handler = &ft2232_handle_channel_command,
-               .mode = COMMAND_CONFIG,
-               .help = "set the FT2232 channel to a new value",
-               .usage = "value",
-       },
-       COMMAND_REGISTRATION_DONE
-};
-
-struct jtag_interface ft2232_interface = {
-       .name = "ft2232",
-       .supported = DEBUG_CAP_TMS_SEQ,
-       .commands = ft2232_command_handlers,
-       .transports = jtag_only,
-
-       .init = ft2232_init,
-       .quit = ft2232_quit,
-       .speed = ft2232_speed,
-       .speed_div = ft2232_speed_div,
-       .khz = ft2232_khz,
-       .execute_queue = ft2232_execute_queue,
-};
index 14b8455..eaf14ae 100644 (file)
@@ -20,7 +20,7 @@
 #ifndef OPENOCD_JTAG_DRIVERS_FTD2XX_COMMON_H
 #define OPENOCD_JTAG_DRIVERS_FTD2XX_COMMON_H
 
-#if ((BUILD_FT2232_FTD2XX == 1) || (BUILD_PRESTO_FTD2XX == 1) || (BUILD_USB_BLASTER_FTD2XX == 1))
+#if ((BUILD_PRESTO_FTD2XX == 1) || (BUILD_USB_BLASTER_FTD2XX == 1))
 #include <ftd2xx.h>
 
 static const char *ftd2xx_status_string(FT_STATUS status)
index 64fdd71..1ee29d2 100644 (file)
@@ -51,12 +51,6 @@ extern struct jtag_interface parport_interface;
 #if BUILD_DUMMY == 1
 extern struct jtag_interface dummy_interface;
 #endif
-#if BUILD_FT2232_FTD2XX == 1
-extern struct jtag_interface ft2232_interface;
-#endif
-#if BUILD_FT2232_LIBFTDI == 1
-extern struct jtag_interface ft2232_interface;
-#endif
 #if BUILD_FTDI == 1
 extern struct jtag_interface ftdi_interface;
 #endif
@@ -150,12 +144,6 @@ struct jtag_interface *jtag_interfaces[] = {
 #if BUILD_DUMMY == 1
                &dummy_interface,
 #endif
-#if BUILD_FT2232_FTD2XX == 1
-               &ft2232_interface,
-#endif
-#if BUILD_FT2232_LIBFTDI == 1
-               &ft2232_interface,
-#endif
 #if BUILD_FTDI == 1
                &ftdi_interface,
 #endif
diff --git a/tcl/interface/axm0432.cfg b/tcl/interface/axm0432.cfg
deleted file mode 100644 (file)
index d2a2aaa..0000000
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Axiom axm0432
-#
-# http://www.axman.com
-#
-
-interface ft2232
-ft2232_device_desc "Symphony SoundBite"
-ft2232_layout "axm0432_jtag"
-ft2232_vid_pid 0x0403 0x6010
-
diff --git a/tcl/interface/busblaster.cfg b/tcl/interface/busblaster.cfg
deleted file mode 100644 (file)
index f87a482..0000000
+++ /dev/null
@@ -1,14 +0,0 @@
-#
-# Dangerous Prototypes - Bus Blaster
-#
-# The Bus Blaster has a configurable buffer between the FTDI FT2232H and the
-# JTAG header which allows it to emulate various debugger types. It comes
-# configured as a JTAGkey device.
-#
-# http://dangerousprototypes.com/docs/Bus_Blaster
-#
-
-interface ft2232
-ft2232_device_desc "Dual RS232-HS"
-ft2232_layout jtagkey
-ft2232_vid_pid 0x0403 0x6010
diff --git a/tcl/interface/calao-usb-a9260-c01.cfg b/tcl/interface/calao-usb-a9260-c01.cfg
deleted file mode 100644 (file)
index c660671..0000000
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# CALAO Systems USB-A9260-C01
-#
-# http://www.calao-systems.com/
-#
-
-interface ft2232
-ft2232_layout jtagkey
-ft2232_device_desc "USB-A9260"
-ft2232_vid_pid 0x0403 0x6010
-script interface/calao-usb-a9260.cfg
-script target/at91sam9260minimal.cfg
-
diff --git a/tcl/interface/calao-usb-a9260-c02.cfg b/tcl/interface/calao-usb-a9260-c02.cfg
deleted file mode 100644 (file)
index 2461b70..0000000
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# CALAO Systems USB-A9260-C02
-#
-# http://www.calao-systems.com/
-#
-
-interface ft2232
-ft2232_layout jtagkey
-ft2232_device_desc "USB-A9260"
-ft2232_vid_pid 0x0403 0x6001
-script interface/calao-usb-a9260.cfg
-script target/at91sam9260minimal.cfg
-
diff --git a/tcl/interface/cortino.cfg b/tcl/interface/cortino.cfg
deleted file mode 100644 (file)
index e2b2301..0000000
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Hitex Cortino
-#
-# http://www.hitex.com/index.php?id=cortino
-#
-
-interface ft2232
-ft2232_device_desc "Cortino"
-ft2232_layout cortino
-ft2232_vid_pid 0x0640 0x0032
-
diff --git a/tcl/interface/digilent-hs1.cfg b/tcl/interface/digilent-hs1.cfg
deleted file mode 100644 (file)
index e35f0cf..0000000
+++ /dev/null
@@ -1,15 +0,0 @@
-#
-# Digilent HS1
-#
-# The Digilent HS1 is a high-speed FT2232H-based adapter, compliant with the
-# Xilinx JTAG 14-pin pinout.
-# It does not support ARM reset signals (SRST and TRST) but can still be used for
-# hardware debugging, with some limitations.
-#
-# http://www.digilentinc.com/Products/Detail.cfm?NavPath=2,395,922&Prod=JTAG-HS1
-#
-
-interface ft2232
-ft2232_device_desc "Digilent Adept USB Device"
-ft2232_layout digilent-hs1
-ft2232_vid_pid 0x0403 0x6010
diff --git a/tcl/interface/dlp-usb1232h.cfg b/tcl/interface/dlp-usb1232h.cfg
deleted file mode 100644 (file)
index 7432413..0000000
+++ /dev/null
@@ -1,14 +0,0 @@
-#
-# DLP Design DLP-USB1232H USB-to-UART/FIFO interface module
-#
-# http://www.dlpdesign.com/usb/usb1232h.shtml
-#
-# Schematics for OpenOCD usage:
-# http://randomprojects.org/wiki/DLP-USB1232H_and_OpenOCD_based_JTAG_adapter
-#
-
-interface ft2232
-ft2232_device_desc "Dual RS232-HS"
-ft2232_layout usbjtag
-ft2232_vid_pid 0x0403 0x6010
-
diff --git a/tcl/interface/flossjtag-noeeprom.cfg b/tcl/interface/flossjtag-noeeprom.cfg
deleted file mode 100644 (file)
index 66c010b..0000000
+++ /dev/null
@@ -1,19 +0,0 @@
-#
-# FlossJTAG
-#
-# http://github.com/esden/floss-jtag
-#
-# This is the pre v0.3 Floss-JTAG compatible config file. It can also be used
-# for newer versions of Floss-JTAG with empty or not populated EEPROM. If you
-# have several Floss-JTAG connected you have to use the USB ID to select a
-# specific one.
-#
-# If you have a Floss-JTAG WITH EEPROM that is programmed, use the
-# flossjtag.cfg file.
-#
-
-interface ft2232
-ft2232_vid_pid 0x0403 0x6010
-ft2232_device_desc "Dual RS232-HS"
-ft2232_layout "usbjtag"
-ft2232_latency 2
diff --git a/tcl/interface/flossjtag.cfg b/tcl/interface/flossjtag.cfg
deleted file mode 100644 (file)
index fbbabc1..0000000
+++ /dev/null
@@ -1,20 +0,0 @@
-#
-# FlossJTAG
-#
-# http://github.com/esden/floss-jtag
-#
-# This is the v0.3 and v1.0 Floss-JTAG compatible config file. It relies on the
-# existence of an EEPROM on Floss-JTAG containing a name. If you have several
-# Floss-JTAG adapters connected you can use the serial number to select a
-# specific device.
-#
-# If your Floss-JTAG does not have an EEPROM, or the EEPROM is empty, use the
-# flossjtag-noeeprom.cfg file.
-#
-
-interface ft2232
-ft2232_vid_pid 0x0403 0x6010
-ft2232_device_desc "FLOSS-JTAG"
-#ft2232_serial "FJ000001"
-ft2232_layout "flossjtag"
-ft2232_latency 2
diff --git a/tcl/interface/flyswatter.cfg b/tcl/interface/flyswatter.cfg
deleted file mode 100644 (file)
index 5bac05b..0000000
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# TinCanTools Flyswatter
-#
-# http://www.tincantools.com/product.php?productid=16134
-#
-
-interface ft2232
-ft2232_device_desc "Flyswatter"
-ft2232_layout "flyswatter"
-ft2232_vid_pid 0x0403 0x6010
diff --git a/tcl/interface/flyswatter2.cfg b/tcl/interface/flyswatter2.cfg
deleted file mode 100644 (file)
index 21e7fed..0000000
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# TinCanTools Flyswatter 2
-#
-# http://www.tincantools.com/product.php?productid=16153
-#
-
-interface ft2232
-ft2232_device_desc "Flyswatter2"
-ft2232_layout "flyswatter2"
-ft2232_vid_pid 0x0403 0x6010
diff --git a/tcl/interface/hilscher_nxhx10_etm.cfg b/tcl/interface/hilscher_nxhx10_etm.cfg
deleted file mode 100644 (file)
index b16ed1a..0000000
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Hilscher NXHX 10-ETM
-#
-# http://de.hilscher.com/products_details_hardware.html?p_id=P_4ce145a5983e6
-#
-
-interface ft2232
-ft2232_device_desc "NXHX 10-ETM"
-ft2232_layout comstick
-ft2232_vid_pid 0x0640 0x0028
-adapter_khz 6000
diff --git a/tcl/interface/hilscher_nxhx500_etm.cfg b/tcl/interface/hilscher_nxhx500_etm.cfg
deleted file mode 100644 (file)
index 840ffaf..0000000
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Hilscher NXHX 500-ETM
-#
-# http://de.hilscher.com/files_design/8/NXHX500-ETM_description_Rev01_EN.pdf
-#
-
-interface ft2232
-ft2232_device_desc "NXHX 500-ETM"
-ft2232_layout comstick
-ft2232_vid_pid 0x0640 0x0028
-adapter_khz 6000
diff --git a/tcl/interface/hilscher_nxhx500_re.cfg b/tcl/interface/hilscher_nxhx500_re.cfg
deleted file mode 100644 (file)
index 1d1b754..0000000
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Hilscher NXHX 500-RE
-#
-# http://de.hilscher.com/products_details_hardware.html?p_id=P_461ff2053bad1&bs=20
-#
-
-interface ft2232
-ft2232_device_desc "NXHX 500-RE"
-ft2232_layout comstick
-ft2232_vid_pid 0x0640 0x0028
-adapter_khz 6000
diff --git a/tcl/interface/hilscher_nxhx50_etm.cfg b/tcl/interface/hilscher_nxhx50_etm.cfg
deleted file mode 100644 (file)
index ff98c28..0000000
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Hilscher NXHX 50-ETM
-#
-# http://de.hilscher.com/files_design/8/NXHX50-ETM_description_Rev01_EN.pdf
-#
-
-interface ft2232
-ft2232_device_desc "NXHX 50-ETM"
-ft2232_layout comstick
-ft2232_vid_pid 0x0640 0x0028
-adapter_khz 6000
diff --git a/tcl/interface/hilscher_nxhx50_re.cfg b/tcl/interface/hilscher_nxhx50_re.cfg
deleted file mode 100644 (file)
index 0573e03..0000000
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Hilscher NXHX 50-RE
-#
-# http://de.hilscher.com/products_details_hardware.html?p_id=P_483c0f582ad36&bs=20
-#
-
-interface ft2232
-ft2232_device_desc "NXHX50-RE"
-ft2232_layout comstick
-ft2232_vid_pid 0x0640 0x0028
-adapter_khz 6000
diff --git a/tcl/interface/hitex_str9-comstick.cfg b/tcl/interface/hitex_str9-comstick.cfg
deleted file mode 100644 (file)
index a38be78..0000000
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Hitex STR9-comStick
-#
-# http://www.hitex.com/index.php?id=383
-#
-
-interface ft2232
-ft2232_device_desc "STR9-comStick"
-ft2232_layout comstick
-ft2232_vid_pid 0x0640 0x002c
-
diff --git a/tcl/interface/icebear.cfg b/tcl/interface/icebear.cfg
deleted file mode 100644 (file)
index 88b5e36..0000000
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Section5 ICEBear
-#
-# http://section5.ch/icebear
-#
-
-interface ft2232
-ft2232_device_desc "ICEbear JTAG adapter"
-ft2232_layout icebear
-ft2232_vid_pid 0x0403 0xc140
-
diff --git a/tcl/interface/jtag-lock-pick_tiny_2.cfg b/tcl/interface/jtag-lock-pick_tiny_2.cfg
deleted file mode 100644 (file)
index 539f0f9..0000000
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# DISTORTEC JTAG-lock-pick Tiny 2
-#
-# http://www.distortec.com
-#
-
-interface ft2232
-ft2232_device_desc "JTAG-lock-pick Tiny 2"
-ft2232_layout ktlink
-ft2232_vid_pid 0x0403 0x8220
diff --git a/tcl/interface/jtagkey-tiny.cfg b/tcl/interface/jtagkey-tiny.cfg
deleted file mode 100644 (file)
index 633fdda..0000000
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# Amontec JTAGkey-tiny
-#
-# http://www.amontec.com/jtagkey-tiny.shtml
-#
-
-# The JTAGkey-tiny uses exactly the same config as the JTAGkey.
-source [find interface/jtagkey.cfg]
-
diff --git a/tcl/interface/jtagkey.cfg b/tcl/interface/jtagkey.cfg
deleted file mode 100644 (file)
index ca45dfc..0000000
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Amontec JTAGkey
-#
-# http://www.amontec.com/jtagkey.shtml
-#
-
-interface ft2232
-ft2232_device_desc "Amontec JTAGkey"
-ft2232_layout jtagkey
-ft2232_vid_pid 0x0403 0xcff8
-
diff --git a/tcl/interface/jtagkey2.cfg b/tcl/interface/jtagkey2.cfg
deleted file mode 100644 (file)
index 40a0b0d..0000000
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Amontec JTAGkey2
-#
-# http://www.amontec.com/jtagkey2.shtml
-#
-
-interface ft2232
-ft2232_device_desc "Amontec JTAGkey-2"
-ft2232_layout jtagkey
-ft2232_vid_pid 0x0403 0xCFF8
-
diff --git a/tcl/interface/jtagkey2p.cfg b/tcl/interface/jtagkey2p.cfg
deleted file mode 100644 (file)
index 98a9417..0000000
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Amontec JTAGkey2P
-#
-# http://www.amontec.com/jtagkey2p.shtml
-#
-
-interface ft2232
-ft2232_device_desc "Amontec JTAGkey-2P"
-ft2232_layout jtagkey
-ft2232_vid_pid 0x0403 0xCFF8
-
diff --git a/tcl/interface/kt-link.cfg b/tcl/interface/kt-link.cfg
deleted file mode 100644 (file)
index 93af8e4..0000000
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# Kristech KT-Link
-#
-# http://www.kristech.eu
-#
-
-interface ft2232
-ft2232_device_desc "KT-LINK"
-ft2232_layout ktlink
-ft2232_vid_pid 0x0403 0xBBE2
diff --git a/tcl/interface/lisa-l.cfg b/tcl/interface/lisa-l.cfg
deleted file mode 100644 (file)
index cc7d6cc..0000000
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Lisa/L
-#
-# http://paparazzi.enac.fr/wiki/Lisa
-#
-
-interface ft2232
-ft2232_vid_pid 0x0403 0x6010
-ft2232_device_desc "Lisa/L"
-ft2232_layout "lisa-l"
-ft2232_latency 2
diff --git a/tcl/interface/luminary-icdi.cfg b/tcl/interface/luminary-icdi.cfg
deleted file mode 100644 (file)
index 94e00ae..0000000
+++ /dev/null
@@ -1,21 +0,0 @@
-#
-# Luminary Micro Stellaris LM3S9B9x Evaluation Kits
-# In-Circuit Debug Interface (ICDI) Board
-#
-# Essentially all Luminary debug hardware is the same, (with both
-# JTAG and SWD support compatible with ICDI boards.  This ICDI adapter
-# configuration is JTAG-only, but the same hardware handles SWD too.
-#
-# This is a discrete FT2232 based debug board which supports ARM's
-# JTAG/SWD connectors in both backwards-compatible 20-pin format and
-# in the new-style compact 10-pin.  There's also an 8-pin connector
-# with serial port support.  It's included with LM3S9B9x eval boards.
-#
-# http://www.luminarymicro.com/products/ek-lm3s9b90.html
-# http://www.luminarymicro.com/products/ek-lm3s9b92.html
-#
-
-interface ft2232
-ft2232_device_desc "Luminary Micro ICDI Board"
-ft2232_layout luminary_icdi
-ft2232_vid_pid 0x0403 0xbcda
diff --git a/tcl/interface/luminary-lm3s811.cfg b/tcl/interface/luminary-lm3s811.cfg
deleted file mode 100644 (file)
index fd747c0..0000000
+++ /dev/null
@@ -1,18 +0,0 @@
-#
-# Luminary Micro Stellaris LM3S811 Evaluation Kit
-#
-# http://www.luminarymicro.com/products/stellaris_811_evaluation_kits.html
-#
-# NOTE:  this is only for boards *before* Rev C, which adds support
-# for SWO tracing with ADBUS_6 DBG_ENn and BDBUS_4 SWO_EN signals.
-# The "evb_lm3s811" layout doesn't set up those signals.
-#
-# Rev C boards work more like the other Stellaris eval boards.  They
-# need to use the "luminary_icdi" layout to work correctly.
-#
-
-interface ft2232
-ft2232_device_desc "LM3S811 Evaluation Board"
-ft2232_layout evb_lm3s811
-ft2232_vid_pid 0x0403 0xbcd9
-
diff --git a/tcl/interface/luminary.cfg b/tcl/interface/luminary.cfg
deleted file mode 100644 (file)
index e94e514..0000000
+++ /dev/null
@@ -1,31 +0,0 @@
-#
-# Luminary Micro Stellaris Evaluation Kits
-#
-# http://www.luminarymicro.com/products/evaluation_kits.html
-#
-# There are a number of evaluation kits for Stellaris Cortex-M3 chips.
-# Currently they all bundle FT2232 based debug support.  When that is
-# used (instead of an external adapter), use this config file in one
-# of these two modes:
-#
-# - Eval board debug ... debug of the Stellaris chip via port A.
-#
-# - Other board debug ... same thing, but the board acts as a debug
-#   adapter for another board (using a standard ARM JTAG connector).
-#   The Stellaris chip stays in reset.
-#
-# Those support both JTAG and SWD.  SWD is an ARM-only two-wire debug
-# protocol; in 2009, OpenOCD does not support SWD.
-#
-# Port B of the FT2232 chip is normally used as a serial link to the
-# Stellaris chip.  On most boards (but not older LM3S811 eval boards),
-# when SWD is used Port B may instead be used to read low-bandwidth
-# "SWO trace" data, including so-called "printf style" output from
-# firmware via the ITM module as well as profile data.
-#
-
-interface ft2232
-ft2232_device_desc "Stellaris Evaluation Board"
-ft2232_layout luminary_icdi
-ft2232_vid_pid 0x0403 0xbcd9
-
diff --git a/tcl/interface/minimodule.cfg b/tcl/interface/minimodule.cfg
deleted file mode 100644 (file)
index c8f9ba1..0000000
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# FTDI MiniModule
-#
-# http://www.ftdichip.com/Support/Documents/DataSheets/Modules/DS_FT2232H_Mini_Module.pdf
-#
-
-interface ft2232
-ft2232_device_desc "FT2232H MiniModule"
-ft2232_layout "minimodule"
-ft2232_vid_pid 0x0403 0x6010
diff --git a/tcl/interface/neodb.cfg b/tcl/interface/neodb.cfg
deleted file mode 100644 (file)
index 8e2f526..0000000
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# Openmoko USB JTAG/RS232 adapter
-#
-# http://wiki.openmoko.org/wiki/Debug_Board_v3
-#
-
-interface ft2232
-ft2232_device_desc "Debug Board for Neo1973"
-ft2232_layout jtagkey
-ft2232_vid_pid 0x1457 0x5118
diff --git a/tcl/interface/ngxtech.cfg b/tcl/interface/ngxtech.cfg
deleted file mode 100644 (file)
index 9dfe01c..0000000
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# NGX ARM USB JTAG
-#
-# http://shop.ngxtechnologies.com/product_info.php?cPath=26&products_id=30
-#
-
-interface ft2232
-ft2232_device_desc "NGX JTAG A"
-ft2232_vid_pid 0x0403 0x6010
-ft2232_layout "oocdlink"
diff --git a/tcl/interface/olimex-arm-usb-ocd-h.cfg b/tcl/interface/olimex-arm-usb-ocd-h.cfg
deleted file mode 100644 (file)
index 47daa92..0000000
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Olimex ARM-USB-OCD-H
-#
-# http://www.olimex.com/dev/arm-usb-ocd.html
-#
-
-interface ft2232
-ft2232_device_desc "Olimex OpenOCD JTAG ARM-USB-OCD-H"
-ft2232_layout olimex-jtag
-ft2232_vid_pid 0x15ba 0x002b
-
diff --git a/tcl/interface/olimex-arm-usb-ocd.cfg b/tcl/interface/olimex-arm-usb-ocd.cfg
deleted file mode 100644 (file)
index 569dcef..0000000
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Olimex ARM-USB-OCD
-#
-# http://www.olimex.com/dev/arm-usb-ocd.html
-#
-
-interface ft2232
-ft2232_device_desc "Olimex OpenOCD JTAG"
-ft2232_layout olimex-jtag
-ft2232_vid_pid 0x15ba 0x0003
-
diff --git a/tcl/interface/olimex-arm-usb-tiny-h.cfg b/tcl/interface/olimex-arm-usb-tiny-h.cfg
deleted file mode 100644 (file)
index b6aa952..0000000
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Olimex ARM-USB-TINY-H
-#
-# http://www.olimex.com/dev/arm-usb-tiny-h.html
-#
-
-interface ft2232
-ft2232_device_desc "Olimex OpenOCD JTAG ARM-USB-TINY-H"
-ft2232_layout olimex-jtag
-ft2232_vid_pid 0x15ba 0x002a
-
diff --git a/tcl/interface/olimex-jtag-tiny.cfg b/tcl/interface/olimex-jtag-tiny.cfg
deleted file mode 100644 (file)
index f28ed9d..0000000
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Olimex ARM-USB-TINY
-#
-# http://www.olimex.com/dev/arm-usb-tiny.html
-#
-
-interface ft2232
-ft2232_device_desc "Olimex OpenOCD JTAG TINY"
-ft2232_layout olimex-jtag
-ft2232_vid_pid 0x15ba 0x0004
-
diff --git a/tcl/interface/oocdlink.cfg b/tcl/interface/oocdlink.cfg
deleted file mode 100644 (file)
index 4e962f5..0000000
+++ /dev/null
@@ -1,12 +0,0 @@
-#
-# Joern Kaipf's OOCDLink
-#
-# http://www.joernonline.de/contrexx2/cms/index.php?page=126
-#
-
-interface ft2232
-ft2232_device_desc "OOCDLink"
-ft2232_layout oocdlink
-ft2232_vid_pid 0x0403 0xbaf8
-adapter_khz 5
-
diff --git a/tcl/interface/opendous_ftdi.cfg b/tcl/interface/opendous_ftdi.cfg
deleted file mode 100644 (file)
index e0e05c4..0000000
+++ /dev/null
@@ -1,15 +0,0 @@
-#
-# Opendous
-#
-# http://code.google.com/p/opendous/wiki/JTAG
-#
-# According to the website, it is similar to jtagkey, but it uses channel B
-# (and it has a different pid number).
-#
-
-interface ft2232
-ft2232_device_desc "Dual RS232-HS"
-ft2232_layout jtagkey
-ft2232_vid_pid 0x0403 0x6010
-ft2232_channel 2
-
diff --git a/tcl/interface/openocd-usb-hs.cfg b/tcl/interface/openocd-usb-hs.cfg
deleted file mode 100644 (file)
index ddf3dce..0000000
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# embedded projects openocd usb adapter v3
-#
-# http://shop.embedded-projects.net/index.php?module=artikel&action=artikel&id=14
-#
-
-interface ft2232
-ft2232_vid_pid 0x0403 0x6010
-ft2232_device_desc "Dual RS232-HS"
-ft2232_layout "oocdlink"
-ft2232_latency 2
diff --git a/tcl/interface/openocd-usb.cfg b/tcl/interface/openocd-usb.cfg
deleted file mode 100644 (file)
index 4000b23..0000000
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Hubert Hoegl's USB to JTAG
-#
-# http://www.hs-augsburg.de/~hhoegl/proj/usbjtag/usbjtag.html
-#
-
-interface ft2232
-ft2232_vid_pid 0x0403 0x6010
-ft2232_device_desc "Dual RS232"
-ft2232_layout "oocdlink"
-ft2232_latency 2
diff --git a/tcl/interface/openrd.cfg b/tcl/interface/openrd.cfg
deleted file mode 100644 (file)
index 322b508..0000000
+++ /dev/null
@@ -1,12 +0,0 @@
-#
-# Marvell OpenRD
-#
-# http://www.marvell.com/products/embedded_processors/developer/kirkwood/openrd.jsp
-#
-
-interface ft2232
-ft2232_layout sheevaplug
-ft2232_vid_pid 0x0403 0x9e90
-ft2232_device_desc "OpenRD JTAGKey FT2232D B"
-adapter_khz 3000
-
diff --git a/tcl/interface/redbee-econotag.cfg b/tcl/interface/redbee-econotag.cfg
deleted file mode 100644 (file)
index 7e17a05..0000000
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# Redwire Redbee-Econotag
-#
-# http://www.redwirellc.com/store/node/1
-#
-# The Redbee-Econotag has an onboard FT2232H with:
-#  - FT2232H channel A wired to mc13224v JTAG
-#  - FT2232H channel B wired to mc13224v UART1
-#
-
-interface ft2232
-ft2232_layout redbee-econotag
-ft2232_vid_pid 0x0403 0x6010
diff --git a/tcl/interface/redbee-usb.cfg b/tcl/interface/redbee-usb.cfg
deleted file mode 100644 (file)
index 5e7e4f7..0000000
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# Redwire Redbee-USB
-#
-# http://www.redwirellc.com
-#
-# The Redbee-USB has an onboard FT2232H with:
-#  - FT2232H channel B wired to mc13224v JTAG
-#  - FT2232H channel A wired to mc13224v UART1
-#
-
-interface ft2232
-ft2232_layout redbee-usb
-ft2232_vid_pid 0x0403 0x6010
diff --git a/tcl/interface/sheevaplug.cfg b/tcl/interface/sheevaplug.cfg
deleted file mode 100644 (file)
index d46d71e..0000000
+++ /dev/null
@@ -1,12 +0,0 @@
-#
-# Marvel SheevaPlug Development Kit
-#
-# http://www.marvell.com/products/embedded_processors/developer/kirkwood/sheevaplug.jsp
-#
-
-interface ft2232
-ft2232_layout sheevaplug
-ft2232_vid_pid 0x9e88 0x9e8f
-ft2232_device_desc "SheevaPlug JTAGKey FT2232D B"
-adapter_khz 2000
-
diff --git a/tcl/interface/signalyzer-h2.cfg b/tcl/interface/signalyzer-h2.cfg
deleted file mode 100644 (file)
index 24288ac..0000000
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Xverve Signalyzer H2 (DT-USB-SH2)
-#
-# http://www.signalyzer.com
-#
-
-interface ft2232
-ft2232_device_desc "Signalyzer H2"
-ft2232_layout signalyzer-h
-ft2232_vid_pid 0x0403 0xbca2
-
diff --git a/tcl/interface/signalyzer-h4.cfg b/tcl/interface/signalyzer-h4.cfg
deleted file mode 100644 (file)
index d2b260b..0000000
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Xverve Signalyzer H4 (DT-USB-SH4)
-#
-# http://www.signalyzer.com
-#
-
-interface ft2232
-ft2232_device_desc "Signalyzer H4"
-ft2232_layout signalyzer-h
-ft2232_vid_pid 0x0403 0xbca4
-
diff --git a/tcl/interface/signalyzer-lite.cfg b/tcl/interface/signalyzer-lite.cfg
deleted file mode 100644 (file)
index 834bc0c..0000000
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Xverve Signalyzer LITE (DT-USB-SLITE)
-#
-# http://www.signalyzer.com
-#
-
-interface ft2232
-ft2232_device_desc "Signalyzer LITE"
-ft2232_layout signalyzer
-ft2232_vid_pid 0x0403 0xbca1
-
diff --git a/tcl/interface/signalyzer.cfg b/tcl/interface/signalyzer.cfg
deleted file mode 100644 (file)
index b0581c5..0000000
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Xverve Signalyzer Tool (DT-USB-ST)
-#
-# http://www.signalyzer.com
-#
-
-interface ft2232
-ft2232_device_desc "Signalyzer"
-ft2232_layout signalyzer
-ft2232_vid_pid 0x0403 0xbca0
-
diff --git a/tcl/interface/stm32-stick.cfg b/tcl/interface/stm32-stick.cfg
deleted file mode 100644 (file)
index 9dcf816..0000000
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Hitex STM32-PerformanceStick
-#
-# http://www.hitex.com/index.php?id=340
-#
-
-interface ft2232
-ft2232_device_desc "STM32-PerformanceStick"
-ft2232_layout stm32stick
-ft2232_vid_pid 0x0640 0x002d
-
diff --git a/tcl/interface/turtelizer2.cfg b/tcl/interface/turtelizer2.cfg
deleted file mode 100644 (file)
index c5e10c0..0000000
+++ /dev/null
@@ -1,15 +0,0 @@
-#
-# egnite Turtelizer 2
-#
-# http://www.ethernut.de/en/hardware/turtelizer/index.html
-#
-# Deprecated, if possible use tcl/interface/ftdi/turtelizer...
-# To run, one of following configure option needed
-#  --enable-legacy-ft2232_libftdi
-#  --enable-legacy-ft2232_ftd2xx
-
-interface ft2232
-ft2232_device_desc "Turtelizer JTAG/RS232 Adapter"
-ft2232_layout turtelizer2
-ft2232_vid_pid 0x0403 0xbdc8
-
diff --git a/tcl/interface/vpaclink.cfg b/tcl/interface/vpaclink.cfg
deleted file mode 100644 (file)
index a4795d3..0000000
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# Voipac VPACLink
-#
-# http://voipac.com/27M-JTG-000
-#
-
-interface ft2232
-ft2232_device_desc "VPACLink A"
-ft2232_layout oocdlink
-ft2232_vid_pid 0x0403 0x6010
diff --git a/tcl/interface/xds100v2.cfg b/tcl/interface/xds100v2.cfg
deleted file mode 100644 (file)
index f14f1d8..0000000
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# Texas Instruments XDS100v2
-#
-# http://processors.wiki.ti.com/index.php/XDS100#XDS100v2_Features
-#
-
-interface ft2232
-ft2232_device_desc "Texas Instruments Inc.XDS100 Ver 2.0"
-ft2232_layout xds100v2
-ft2232_vid_pid 0x0403 0xa6d0