target/cortex_m: do not use VECTRESET on Cortex-M0, M0+ and M1 94/4794/4
authorTomas Vanek <vanekt@fbl.cz>
Fri, 7 Dec 2018 16:00:12 +0000 (17:00 +0100)
committerTomas Vanek <vanekt@fbl.cz>
Wed, 19 Dec 2018 13:14:09 +0000 (13:14 +0000)
Cortex-M0, M0+ and M1 do not support VECTRESET bit in AIRCR.
Without this change the 'reset' command silently fails if VECTRESET
is requested.

Detect these cores, show warning if VECTRESET is about to use
and use SYSRESETREQ instead.

Change-Id: Ief174373e3ef0e6b287c57911c0aca4dfa8209f2
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/4794
Tested-by: jenkins
Reviewed-by: Jean-Christian de Rivaz <jcamdr70@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
doc/openocd.texi
src/target/cortex_m.c
src/target/cortex_m.h

index 11ee93e..bc24aed 100644 (file)
@@ -9002,11 +9002,15 @@ otherwise fallback to @option{vectreset}.
 @item @option{sysresetreq} use NVIC SYSRESETREQ to reset system.
 @item @option{vectreset} use NVIC VECTRESET to reset system.
 @end itemize
-Using @option{vectreset} is a safe option for all current Cortex-M cores.
+
+Using @option{vectreset} is a safe option for Cortex-M3, M4 and M7 cores.
 This however has the disadvantage of only resetting the core, all peripherals
-are unaffected. A solution would be to use a @code{reset-init} event handler to manually reset
-the peripherals.
+are unaffected. A solution would be to use a @code{reset-init} event handler
+to manually reset the peripherals.
 @xref{targetevents,,Target Events}.
+
+Cortex-M0, M0+ and M1 do not support @option{vectreset}, use @option{sysresetreq}
+instead.
 @end deffn
 
 @subsection ARMv8-A specific commands
index 07fea51..bb8c06d 100644 (file)
@@ -1041,10 +1041,18 @@ static int cortex_m_assert_reset(struct target *target)
                retval = ERROR_OK;
        } else {
                /* Use a standard Cortex-M3 software reset mechanism.
-                * We default to using VECRESET as it is supported on all current cores.
+                * We default to using VECRESET as it is supported on all current cores
+                * (except Cortex-M0, M0+ and M1 which support SYSRESETREQ only!)
                 * This has the disadvantage of not resetting the peripherals, so a
                 * reset-init event handler is needed to perform any peripheral resets.
                 */
+               if (!cortex_m->vectreset_supported
+                               && reset_config == CORTEX_M_RESET_VECTRESET) {
+                       reset_config = CORTEX_M_RESET_SYSRESETREQ;
+                       LOG_WARNING("VECTRESET is not supported on this Cortex-M core, using SYSRESETREQ instead.");
+                       LOG_WARNING("Set 'cortex_m reset_config sysresetreq'.");
+               }
+
                LOG_DEBUG("Using Cortex-M %s", (reset_config == CORTEX_M_RESET_SYSRESETREQ)
                        ? "SYSRESETREQ" : "VECTRESET");
 
@@ -2027,6 +2035,9 @@ int cortex_m_examine(struct target *target)
                }
                LOG_DEBUG("cpuid: 0x%8.8" PRIx32 "", cpuid);
 
+               /* VECTRESET is not supported on Cortex-M0, M0+ and M1 */
+               cortex_m->vectreset_supported = i > 1;
+
                if (i == 4) {
                        target_read_u32(target, MVFR0, &mvfr0);
                        target_read_u32(target, MVFR1, &mvfr1);
@@ -2418,8 +2429,14 @@ COMMAND_HANDLER(handle_cortex_m_reset_config_command)
        if (CMD_ARGC > 0) {
                if (strcmp(*CMD_ARGV, "sysresetreq") == 0)
                        cortex_m->soft_reset_config = CORTEX_M_RESET_SYSRESETREQ;
-               else if (strcmp(*CMD_ARGV, "vectreset") == 0)
-                       cortex_m->soft_reset_config = CORTEX_M_RESET_VECTRESET;
+
+               else if (strcmp(*CMD_ARGV, "vectreset") == 0) {
+                       if (target_was_examined(target)
+                                       && !cortex_m->vectreset_supported)
+                               LOG_WARNING("VECTRESET is not supported on your Cortex-M core!");
+                       else
+                               cortex_m->soft_reset_config = CORTEX_M_RESET_VECTRESET;
+               }
        }
 
        switch (cortex_m->soft_reset_config) {
index 2daf4cb..22d9735 100644 (file)
@@ -184,6 +184,7 @@ struct cortex_m_common {
        struct reg_cache *dwt_cache;
 
        enum cortex_m_soft_reset_config soft_reset_config;
+       bool vectreset_supported;
 
        enum cortex_m_isrmasking_mode isrmasking_mode;