David Claffey <dnclaffey@gmail.com>:
authorzwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>
Fri, 12 Jun 2009 04:14:18 +0000 (04:14 +0000)
committerzwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>
Fri, 12 Jun 2009 04:14:18 +0000 (04:14 +0000)
This patch helps fix MIPS big endian (elf32-tradbigmips) targets.
If "-endian big" is not set in target create, the endianess defaults to
little.  mw and md commands will still work, but binary file loads will
have the incorrect word order loaded into memory.

The EJTAG processor access data register (PrAcc) is little endian
regardless of the CPU endianness; it is always loaded LSB first. This
is confirmed by the fact that mips_ejtag_drscan_32() uses buf_set_u32()
to load the scan field; buf_set_u32() is a little-endian formatter. For
big endian targets, data buffers have to be modified so the LSB of each
u32 or u16 is at the lower (first) memory location.  If the drscan
out_value word order is set using buf_set_u32() then it makes sense to
also fixup the in_value with buf_get_u32(); a symmetry argument. This
has no affect on little endian hosts.

git-svn-id: svn://svn.berlios.de/openocd/trunk@2219 b42882b7-edfa-0310-969c-e2dbd0fdcd60

src/target/mips_ejtag.c
src/target/mips_m4k.c

index 2394b00c351323d95aaffaa72928af5b04eee99f..4c8010b5388e7dce7ce4eae6e515d5fbc6ac92b6 100644 (file)
@@ -118,7 +118,7 @@ int mips_ejtag_drscan_32(mips_ejtag_t *ejtag_info, u32 *data)
        if (tap==NULL)
                return ERROR_FAIL;
        scan_field_t field;
        if (tap==NULL)
                return ERROR_FAIL;
        scan_field_t field;
-       u8 t[4];
+       u8 t[4], r[4];
        int retval;
 
        field.tap = tap;
        int retval;
 
        field.tap = tap;
@@ -126,7 +126,7 @@ int mips_ejtag_drscan_32(mips_ejtag_t *ejtag_info, u32 *data)
        field.out_value = t;
        buf_set_u32(field.out_value, 0, field.num_bits, *data);
 
        field.out_value = t;
        buf_set_u32(field.out_value, 0, field.num_bits, *data);
 
-       field.in_value = (u8*)data;
+       field.in_value = r;
        
        
        
        
        
        
@@ -139,6 +139,8 @@ int mips_ejtag_drscan_32(mips_ejtag_t *ejtag_info, u32 *data)
                return retval;
        }
 
                return retval;
        }
 
+       *data = buf_get_u32(field.in_value, 0, 32);
+
        keep_alive();
 
        return ERROR_OK;
        keep_alive();
 
        return ERROR_OK;
index 5e98a2a0a18477acf021f46c6b13a5d39e9a59a7..b271efe12132e93cb17adb037323f6cf251305b2 100644 (file)
@@ -732,6 +732,7 @@ int mips_m4k_read_memory(struct target_s *target, u32 address, u32 size, u32 cou
 {
        mips32_common_t *mips32 = target->arch_info;
        mips_ejtag_t *ejtag_info = &mips32->ejtag_info;
 {
        mips32_common_t *mips32 = target->arch_info;
        mips_ejtag_t *ejtag_info = &mips32->ejtag_info;
+       int retval;
 
        LOG_DEBUG("address: 0x%8.8x, size: 0x%8.8x, count: 0x%8.8x", address, size, count);
 
 
        LOG_DEBUG("address: 0x%8.8x, size: 0x%8.8x, count: 0x%8.8x", address, size, count);
 
@@ -755,22 +756,46 @@ int mips_m4k_read_memory(struct target_s *target, u32 address, u32 size, u32 cou
                case 1:
                        /* if noDMA off, use DMAACC mode for memory read */
                        if(ejtag_info->impcode & EJTAG_IMP_NODMA)
                case 1:
                        /* if noDMA off, use DMAACC mode for memory read */
                        if(ejtag_info->impcode & EJTAG_IMP_NODMA)
-                               return mips32_pracc_read_mem(ejtag_info, address, size, count, (void *)buffer);
+                               retval = mips32_pracc_read_mem(ejtag_info, address, size, count, (void *)buffer);
                        else
                        else
-                               return mips32_dmaacc_read_mem(ejtag_info, address, size, count, (void *)buffer);
+                               retval = mips32_dmaacc_read_mem(ejtag_info, address, size, count, (void *)buffer);
+                       break;
                default:
                        LOG_ERROR("BUG: we shouldn't get here");
                        exit(-1);
                        break;
        }
 
                default:
                        LOG_ERROR("BUG: we shouldn't get here");
                        exit(-1);
                        break;
        }
 
-       return ERROR_OK;
+       /* TAP data register is loaded LSB first (little endian) */
+       if (target->endianness == TARGET_BIG_ENDIAN) 
+       {
+               u32 i, t32;
+               u16 t16;
+
+               for(i = 0; i < (count*size); i += size)
+               {
+                       switch(size)
+                       {
+                               case 4:
+                                       t32 = le_to_h_u32(&buffer[i]);
+                                       h_u32_to_be(&buffer[i], t32);
+                                       break;
+                               case 2:
+                                       t16 = le_to_h_u16(&buffer[i]);
+                                       h_u16_to_be(&buffer[i], t16);
+                                       break;
+                       }
+               }
+       }
+       
+       return retval;
 }
 
 int mips_m4k_write_memory(struct target_s *target, u32 address, u32 size, u32 count, u8 *buffer)
 {
        mips32_common_t *mips32 = target->arch_info;
        mips_ejtag_t *ejtag_info = &mips32->ejtag_info;
 }
 
 int mips_m4k_write_memory(struct target_s *target, u32 address, u32 size, u32 count, u8 *buffer)
 {
        mips32_common_t *mips32 = target->arch_info;
        mips_ejtag_t *ejtag_info = &mips32->ejtag_info;
+       int retval;
 
        LOG_DEBUG("address: 0x%8.8x, size: 0x%8.8x, count: 0x%8.8x", address, size, count);
 
 
        LOG_DEBUG("address: 0x%8.8x, size: 0x%8.8x, count: 0x%8.8x", address, size, count);
 
@@ -793,10 +818,6 @@ int mips_m4k_write_memory(struct target_s *target, u32 address, u32 size, u32 co
                case 2:
                case 1:
                        /* if noDMA off, use DMAACC mode for memory write */
                case 2:
                case 1:
                        /* if noDMA off, use DMAACC mode for memory write */
-                       if(ejtag_info->impcode & EJTAG_IMP_NODMA)
-                               mips32_pracc_write_mem(ejtag_info, address, size, count, (void *)buffer);
-                       else
-                               mips32_dmaacc_write_mem(ejtag_info, address, size, count, (void *)buffer);
                        break;
                default:
                        LOG_ERROR("BUG: we shouldn't get here");
                        break;
                default:
                        LOG_ERROR("BUG: we shouldn't get here");
@@ -804,7 +825,35 @@ int mips_m4k_write_memory(struct target_s *target, u32 address, u32 size, u32 co
                        break;
        }
 
                        break;
        }
 
-       return ERROR_OK;
+       /* TAP data register is loaded LSB first (little endian) */
+       if (target->endianness == TARGET_BIG_ENDIAN)
+       {
+               u32 i, t32;
+               u16 t16;
+
+               for(i = 0; i < (count*size); i += size)
+               {
+                       switch(size) 
+                       {
+                               case 4:
+                                       t32 = be_to_h_u32(&buffer[i]);
+                                       h_u32_to_le(&buffer[i], t32);
+                                       break;
+                               case 2:
+                                       t16 = be_to_h_u16(&buffer[i]);
+                                       h_u16_to_le(&buffer[i], t16);
+                                       break;
+                       }
+               }
+       }          
+
+       if(ejtag_info->impcode & EJTAG_IMP_NODMA)
+               retval = mips32_pracc_write_mem(ejtag_info, address, size, count, (void *)buffer);
+       else
+               retval = mips32_dmaacc_write_mem(ejtag_info, address, size, count, (void *)buffer);
+       
+
+       return retval;
 }
 
 int mips_m4k_register_commands(struct command_context_s *cmd_ctx)
 }
 
 int mips_m4k_register_commands(struct command_context_s *cmd_ctx)

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)