Change-Id: I98825c7fb9bdee75b69b06005ed12a3f64ec4db4
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Reviewed-on: http://openocd.zylin.com/139
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
#
if { [info exists PARPORTADDR] } {
#
if { [info exists PARPORTADDR] } {
- set _PARPORTADDR $PARPORTADDR
+ set _PARPORTADDR $PARPORTADDR
# http://github.com/esden/floss-jtag
#
# This is the pre v0.3 Floss-JTAG compatible config file. It can also be used
# http://github.com/esden/floss-jtag
#
# This is the pre v0.3 Floss-JTAG compatible config file. It can also be used
-# for newer versions of Floss-JTAG with empty or not populated eeprom. If you
-# have several Floss-JTAG connected you have to use the usb id to select a
+# for newer versions of Floss-JTAG with empty or not populated EEPROM. If you
+# have several Floss-JTAG connected you have to use the USB ID to select a
-# If you have a Floss-JTAG WITH eeprom that is programmed use flossjtag.cfg
-# file.
+# If you have a Floss-JTAG WITH EEPROM that is programmed, use the
+# flossjtag.cfg file.
# http://github.com/esden/floss-jtag
#
# This is the v0.3 and v1.0 Floss-JTAG compatible config file. It relies on the
# http://github.com/esden/floss-jtag
#
# This is the v0.3 and v1.0 Floss-JTAG compatible config file. It relies on the
-# existence of an eeprom on Floss-JTAG containing a name. If you have several
+# existence of an EEPROM on Floss-JTAG containing a name. If you have several
# Floss-JTAG adapters connected you can use the serial number to select a
# specific device.
#
# Floss-JTAG adapters connected you can use the serial number to select a
# specific device.
#
-# If your Floss-JTAG does not have an eeprom or eeprom is empty use
+# If your Floss-JTAG does not have an EEPROM, or the EEPROM is empty, use the
# flossjtag-noeeprom.cfg file.
#
# flossjtag-noeeprom.cfg file.
#
# Parallel port wiggler (many clones available) on port 0x378
#
# Addresses: 0x378/LPT1 or 0x278/LPT2 ...
# Parallel port wiggler (many clones available) on port 0x378
#
# Addresses: 0x378/LPT1 or 0x278/LPT2 ...
if { [info exists PARPORTADDR] } {
if { [info exists PARPORTADDR] } {
- set _PARPORTADDR $PARPORTADDR
+ set _PARPORTADDR $PARPORTADDR
#
if { [info exists PARPORTADDR] } {
#
if { [info exists PARPORTADDR] } {
- set _PARPORTADDR $PARPORTADDR
+ set _PARPORTADDR $PARPORTADDR
-# USBprog is broken w/short tms sequences, this is a workaround
+# USBprog is broken w/short TMS sequences, this is a workaround
# until the C code can be fixed.
# until the C code can be fixed.
-tms_sequence long
\ No newline at end of file
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)