+/**************************************************************************
+ * Copyright (C) 2012 by Andreas Fritiofson *
+ * andreas.fritiofson@gmail.com *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the *
+ * Free Software Foundation, Inc., *
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ ***************************************************************************/
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "mpsse.h"
+#include "helper/log.h"
+#include <libusb-1.0/libusb.h>
+
+/* Compatibility define for older libusb-1.0 */
+#ifndef LIBUSB_CALL
+#define LIBUSB_CALL
+#endif
+
+#ifdef _DEBUG_JTAG_IO_
+#define DEBUG_IO(expr...) LOG_DEBUG(expr)
+#define DEBUG_PRINT_BUF(buf, len) \
+ do { \
+ char buf_string[32 * 3 + 1]; \
+ int buf_string_pos = 0; \
+ for (int i = 0; i < len; i++) { \
+ buf_string_pos += sprintf(buf_string + buf_string_pos, " %02x", buf[i]); \
+ if (i % 32 == 32 - 1) { \
+ LOG_DEBUG("%s", buf_string); \
+ buf_string_pos = 0; \
+ } \
+ } \
+ if (buf_string_pos > 0) \
+ LOG_DEBUG("%s", buf_string);\
+ } while (0)
+#else
+#define DEBUG_IO(expr...) do {} while (0)
+#define DEBUG_PRINT_BUF(buf, len) do {} while (0)
+#endif
+
+#define FTDI_DEVICE_OUT_REQTYPE (LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_RECIPIENT_DEVICE)
+#define FTDI_DEVICE_IN_REQTYPE (0x80 | LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_RECIPIENT_DEVICE)
+
+#define BITMODE_MPSSE 0x02
+
+#define SIO_RESET_REQUEST 0x00
+#define SIO_SET_LATENCY_TIMER_REQUEST 0x09
+#define SIO_GET_LATENCY_TIMER_REQUEST 0x0A
+#define SIO_SET_BITMODE_REQUEST 0x0B
+
+#define SIO_RESET_SIO 0
+#define SIO_RESET_PURGE_RX 1
+#define SIO_RESET_PURGE_TX 2
+
+struct mpsse_ctx {
+ libusb_context *usb_ctx;
+ libusb_device_handle *usb_dev;
+ unsigned int usb_write_timeout;
+ unsigned int usb_read_timeout;
+ uint8_t in_ep;
+ uint8_t out_ep;
+ uint16_t max_packet_size;
+ uint16_t index;
+ uint8_t interface;
+ enum ftdi_chip_type type;
+ uint8_t *write_buffer;
+ unsigned write_size;
+ unsigned write_count;
+ uint8_t *read_buffer;
+ unsigned read_size;
+ unsigned read_count;
+ uint8_t *read_chunk;
+ unsigned read_chunk_size;
+ struct bit_copy_queue read_queue;
+};
+
+/* Returns true if the string descriptor indexed by str_index in device matches string */
+static bool string_descriptor_equal(libusb_device_handle *device, uint8_t str_index,
+ const char *string)
+{
+ int retval;
+ char desc_string[256]; /* Max size of string descriptor */
+ retval = libusb_get_string_descriptor_ascii(device, str_index, (unsigned char *)desc_string,
+ sizeof(desc_string));
+ if (retval < 0) {
+ LOG_ERROR("libusb_get_string_descriptor_ascii() failed with %d", retval);
+ return false;
+ }
+ return strncmp(string, desc_string, sizeof(desc_string)) == 0;
+}
+
+/* Helper to open a libusb device that matches vid, pid, product string and/or serial string.
+ * Set any field to 0 as a wildcard. If the device is found true is returned, with ctx containing
+ * the already opened handle. ctx->interface must be set to the desired interface (channel) number
+ * prior to calling this function. */
+static bool open_matching_device(struct mpsse_ctx *ctx, const uint16_t *vid, const uint16_t *pid,
+ const char *product, const char *serial)
+{
+ libusb_device **list;
+ struct libusb_device_descriptor desc;
+ struct libusb_config_descriptor *config0;
+ int err;
+ bool found = false;
+ ssize_t cnt = libusb_get_device_list(ctx->usb_ctx, &list);
+ if (cnt < 0)
+ LOG_ERROR("libusb_get_device_list() failed with %zi", cnt);
+
+ for (ssize_t i = 0; i < cnt; i++) {
+ libusb_device *device = list[i];
+
+ err = libusb_get_device_descriptor(device, &desc);
+ if (err != LIBUSB_SUCCESS) {
+ LOG_ERROR("libusb_get_device_descriptor() failed with %d", err);
+ continue;
+ }
+
+ if (vid && *vid != desc.idVendor)
+ continue;
+ if (pid && *pid != desc.idProduct)
+ continue;
+
+ err = libusb_open(device, &ctx->usb_dev);
+ if (err != LIBUSB_SUCCESS) {
+ LOG_ERROR("libusb_open() failed with %d", err);
+ continue;
+ }
+
+ if (product && !string_descriptor_equal(ctx->usb_dev, desc.iProduct, product)) {
+ libusb_close(ctx->usb_dev);
+ continue;
+ }
+
+ if (serial && !string_descriptor_equal(ctx->usb_dev, desc.iSerialNumber, serial)) {
+ libusb_close(ctx->usb_dev);
+ continue;
+ }
+
+ found = true;
+ break;
+ }
+
+ libusb_free_device_list(list, 1);
+
+ if (!found) {
+ LOG_ERROR("no device found");
+ return false;
+ }
+
+ err = libusb_get_config_descriptor(libusb_get_device(ctx->usb_dev), 0, &config0);
+ if (err != LIBUSB_SUCCESS) {
+ LOG_ERROR("libusb_get_config_descriptor() failed with %d", err);
+ libusb_close(ctx->usb_dev);
+ return false;
+ }
+
+ /* Make sure the first configuration is selected */
+ int cfg;
+ err = libusb_get_configuration(ctx->usb_dev, &cfg);
+ if (err != LIBUSB_SUCCESS) {
+ LOG_ERROR("libusb_get_configuration() failed with %d", err);
+ goto error;
+ }
+
+ if (desc.bNumConfigurations > 0 && cfg != config0->bConfigurationValue) {
+ err = libusb_set_configuration(ctx->usb_dev, config0->bConfigurationValue);
+ if (err != LIBUSB_SUCCESS) {
+ LOG_ERROR("libusb_set_configuration() failed with %d", err);
+ goto error;
+ }
+ }
+
+ /* Try to detach ftdi_sio kernel module */
+ err = libusb_detach_kernel_driver(ctx->usb_dev, ctx->interface);
+ if (err != LIBUSB_SUCCESS && err != LIBUSB_ERROR_NOT_FOUND
+ && err != LIBUSB_ERROR_NOT_SUPPORTED) {
+ LOG_ERROR("libusb_detach_kernel_driver() failed with %d", err);
+ goto error;
+ }
+
+ err = libusb_claim_interface(ctx->usb_dev, ctx->interface);
+ if (err != LIBUSB_SUCCESS) {
+ LOG_ERROR("libusb_claim_interface() failed with %d", err);
+ goto error;
+ }
+
+ /* Reset FTDI device */
+ err = libusb_control_transfer(ctx->usb_dev, FTDI_DEVICE_OUT_REQTYPE,
+ SIO_RESET_REQUEST, SIO_RESET_SIO,
+ ctx->index, NULL, 0, ctx->usb_write_timeout);
+ if (err < 0) {
+ LOG_ERROR("failed to reset FTDI device: %d", err);
+ goto error;
+ }
+
+ switch (desc.bcdDevice) {
+ case 0x500:
+ ctx->type = TYPE_FT2232C;
+ break;
+ case 0x700:
+ ctx->type = TYPE_FT2232H;
+ break;
+ case 0x800:
+ ctx->type = TYPE_FT4232H;
+ break;
+ default:
+ LOG_ERROR("unsupported FTDI chip type: 0x%04x", desc.bcdDevice);
+ goto error;
+ }
+
+ /* Determine maximum packet size and endpoint addresses */
+ if (!(desc.bNumConfigurations > 0 && ctx->interface < config0->bNumInterfaces
+ && config0->interface[ctx->interface].num_altsetting > 0))
+ goto desc_error;
+
+ const struct libusb_interface_descriptor *descriptor;
+ descriptor = &config0->interface[ctx->interface].altsetting[0];
+ if (descriptor->bNumEndpoints != 2)
+ goto desc_error;
+
+ ctx->in_ep = 0;
+ ctx->out_ep = 0;
+ for (int i = 0; i < descriptor->bNumEndpoints; i++) {
+ if (descriptor->endpoint[i].bEndpointAddress & 0x80) {
+ ctx->in_ep = descriptor->endpoint[i].bEndpointAddress;
+ ctx->max_packet_size =
+ descriptor->endpoint[i].wMaxPacketSize;
+ } else {
+ ctx->out_ep = descriptor->endpoint[i].bEndpointAddress;
+ }
+ }
+
+ if (ctx->in_ep == 0 || ctx->out_ep == 0)
+ goto desc_error;
+
+ libusb_free_config_descriptor(config0);
+ return true;
+
+desc_error:
+ LOG_ERROR("unrecognized USB device descriptor");
+error:
+ libusb_free_config_descriptor(config0);
+ libusb_close(ctx->usb_dev);
+ return false;
+}
+
+struct mpsse_ctx *mpsse_open(const uint16_t *vid, const uint16_t *pid, const char *description,
+ const char *serial, int channel)
+{
+ struct mpsse_ctx *ctx = calloc(1, sizeof(*ctx));
+ int err;
+
+ if (!ctx)
+ return 0;
+
+ bit_copy_queue_init(&ctx->read_queue);
+ ctx->read_chunk_size = 16384;
+ ctx->read_size = 16384;
+ ctx->write_size = 16384;
+ ctx->read_chunk = malloc(ctx->read_chunk_size);
+ ctx->read_buffer = malloc(ctx->read_size);
+ ctx->write_buffer = malloc(ctx->write_size);
+ if (!ctx->read_chunk || !ctx->read_buffer || !ctx->write_buffer)
+ goto error;
+
+ ctx->interface = channel;
+ ctx->index = channel + 1;
+ ctx->usb_read_timeout = 5000;
+ ctx->usb_write_timeout = 5000;
+
+ err = libusb_init(&ctx->usb_ctx);
+ if (err != LIBUSB_SUCCESS) {
+ LOG_ERROR("libusb_init() failed with %d", err);
+ goto error;
+ }
+
+ if (!open_matching_device(ctx, vid, pid, description, serial)) {
+ /* Four hex digits plus terminating zero each */
+ char vidstr[5];
+ char pidstr[5];
+ LOG_ERROR("unable to open ftdi device with vid %s, pid %s, description '%s' and "
+ "serial '%s'",
+ vid ? sprintf(vidstr, "%04x", *vid), vidstr : "*",
+ pid ? sprintf(pidstr, "%04x", *pid), pidstr : "*",
+ description ? description : "*",
+ serial ? serial : "*");
+ ctx->usb_dev = 0;
+ goto error;
+ }
+
+ err = libusb_control_transfer(ctx->usb_dev, FTDI_DEVICE_OUT_REQTYPE,
+ SIO_SET_LATENCY_TIMER_REQUEST, 255, ctx->index, NULL, 0,
+ ctx->usb_write_timeout);
+ if (err < 0) {
+ LOG_ERROR("unable to set latency timer: %d", err);
+ goto error;
+ }
+
+ err = libusb_control_transfer(ctx->usb_dev,
+ FTDI_DEVICE_OUT_REQTYPE,
+ SIO_SET_BITMODE_REQUEST,
+ 0x0b | (BITMODE_MPSSE << 8),
+ ctx->index,
+ NULL,
+ 0,
+ ctx->usb_write_timeout);
+ if (err < 0) {
+ LOG_ERROR("unable to set MPSSE bitmode: %d", err);
+ goto error;
+ }
+
+ mpsse_purge(ctx);
+
+ return ctx;
+error:
+ mpsse_close(ctx);
+ return 0;
+}
+
+void mpsse_close(struct mpsse_ctx *ctx)
+{
+ if (ctx->usb_dev)
+ libusb_close(ctx->usb_dev);
+ if (ctx->usb_ctx)
+ libusb_exit(ctx->usb_ctx);
+ bit_copy_discard(&ctx->read_queue);
+ if (ctx->write_buffer)
+ free(ctx->write_buffer);
+ if (ctx->read_buffer)
+ free(ctx->read_buffer);
+ if (ctx->read_chunk)
+ free(ctx->read_chunk);
+
+ free(ctx);
+}
+
+bool mpsse_is_high_speed(struct mpsse_ctx *ctx)
+{
+ return ctx->type != TYPE_FT2232C;
+}
+
+void mpsse_purge(struct mpsse_ctx *ctx)
+{
+ int err;
+ LOG_DEBUG("-");
+ ctx->write_count = 0;
+ ctx->read_count = 0;
+ bit_copy_discard(&ctx->read_queue);
+ err = libusb_control_transfer(ctx->usb_dev, FTDI_DEVICE_OUT_REQTYPE, SIO_RESET_REQUEST,
+ SIO_RESET_PURGE_RX, ctx->index, NULL, 0, ctx->usb_write_timeout);
+ if (err < 0) {
+ LOG_ERROR("unable to purge ftdi rx buffers: %d", err);
+ return;
+ }
+
+ err = libusb_control_transfer(ctx->usb_dev, FTDI_DEVICE_OUT_REQTYPE, SIO_RESET_REQUEST,
+ SIO_RESET_PURGE_TX, ctx->index, NULL, 0, ctx->usb_write_timeout);
+ if (err < 0) {
+ LOG_ERROR("unable to purge ftdi tx buffers: %d", err);
+ return;
+ }
+}
+
+static unsigned buffer_write_space(struct mpsse_ctx *ctx)
+{
+ /* Reserve one byte for SEND_IMMEDIATE */
+ return ctx->write_size - ctx->write_count - 1;
+}
+
+static unsigned buffer_read_space(struct mpsse_ctx *ctx)
+{
+ return ctx->read_size - ctx->read_count;
+}
+
+static void buffer_write_byte(struct mpsse_ctx *ctx, uint8_t data)
+{
+ DEBUG_IO("%02x", data);
+ assert(ctx->write_count < ctx->write_size);
+ ctx->write_buffer[ctx->write_count++] = data;
+}
+
+static unsigned buffer_write(struct mpsse_ctx *ctx, const uint8_t *out, unsigned out_offset,
+ unsigned bit_count)
+{
+ DEBUG_IO("%d bits", bit_count);
+ assert(ctx->write_count + DIV_ROUND_UP(bit_count, 8) <= ctx->write_size);
+ bit_copy(ctx->write_buffer + ctx->write_count, 0, out, out_offset, bit_count);
+ ctx->write_count += DIV_ROUND_UP(bit_count, 8);
+ return bit_count;
+}
+
+static unsigned buffer_add_read(struct mpsse_ctx *ctx, uint8_t *in, unsigned in_offset,
+ unsigned bit_count, unsigned offset)
+{
+ DEBUG_IO("%d bits, offset %d", bit_count, offset);
+ assert(ctx->read_count + DIV_ROUND_UP(bit_count, 8) <= ctx->read_size);
+ bit_copy_queued(&ctx->read_queue, in, in_offset, ctx->read_buffer + ctx->read_count, offset,
+ bit_count);
+ ctx->read_count += DIV_ROUND_UP(bit_count, 8);
+ return bit_count;
+}
+
+int mpsse_clock_data_out(struct mpsse_ctx *ctx, const uint8_t *out, unsigned out_offset,
+ unsigned length, uint8_t mode)
+{
+ return mpsse_clock_data(ctx, out, out_offset, 0, 0, length, mode);
+}
+
+int mpsse_clock_data_in(struct mpsse_ctx *ctx, uint8_t *in, unsigned in_offset, unsigned length,
+ uint8_t mode)
+{
+ return mpsse_clock_data(ctx, 0, 0, in, in_offset, length, mode);
+}
+
+int mpsse_clock_data(struct mpsse_ctx *ctx, const uint8_t *out, unsigned out_offset, uint8_t *in,
+ unsigned in_offset, unsigned length, uint8_t mode)
+{
+ /* TODO: Fix MSB first modes */
+ DEBUG_IO("%s%s %d bits", in ? "in" : "", out ? "out" : "", length);
+ int retval = ERROR_OK;
+
+ /* TODO: On H chips, use command 0x8E/0x8F if in and out are both 0 */
+ if (out || (!out && !in))
+ mode |= 0x10;
+ if (in)
+ mode |= 0x20;
+
+ while (length > 0) {
+ /* Guarantee buffer space enough for a minimum size transfer */
+ if (buffer_write_space(ctx) + (length < 8) < (out ? 4 : 3)
+ || (in && buffer_read_space(ctx) < 1))
+ retval = mpsse_flush(ctx);
+
+ if (length < 8) {
+ /* Transfer remaining bits in bit mode */
+ buffer_write_byte(ctx, 0x02 | mode);
+ buffer_write_byte(ctx, length - 1);
+ if (out)
+ out_offset += buffer_write(ctx, out, out_offset, length);
+ if (in)
+ in_offset += buffer_add_read(ctx, in, in_offset, length, 8 - length);
+ if (!out && !in)
+ buffer_write_byte(ctx, 0x00);
+ length = 0;
+ } else {
+ /* Byte transfer */
+ unsigned this_bytes = length / 8;
+ /* MPSSE command limit */
+ if (this_bytes > 65536)
+ this_bytes = 65536;
+ /* Buffer space limit. We already made sure there's space for the minimum
+ *transfer. */
+ if (out && this_bytes + 3 > buffer_write_space(ctx))
+ this_bytes = buffer_write_space(ctx) - 3;
+ if (in && this_bytes > buffer_read_space(ctx))
+ this_bytes = buffer_read_space(ctx);
+
+ if (this_bytes > 0) {
+ buffer_write_byte(ctx, mode);
+ buffer_write_byte(ctx, (this_bytes - 1) & 0xff);
+ buffer_write_byte(ctx, (this_bytes - 1) >> 8);
+ if (out)
+ out_offset += buffer_write(ctx,
+ out,
+ out_offset,
+ this_bytes * 8);
+ if (in)
+ in_offset += buffer_add_read(ctx,
+ in,
+ in_offset,
+ this_bytes * 8,
+ 0);
+ if (!out && !in)
+ for (unsigned n = 0; n < this_bytes; n++)
+ buffer_write_byte(ctx, 0x00);
+ length -= this_bytes * 8;
+ }
+ }
+ }
+ return retval;
+}
+
+int mpsse_clock_tms_cs_out(struct mpsse_ctx *ctx, const uint8_t *out, unsigned out_offset,
+ unsigned length, bool tdi, uint8_t mode)
+{
+ return mpsse_clock_tms_cs(ctx, out, out_offset, 0, 0, length, tdi, mode);
+}
+
+int mpsse_clock_tms_cs(struct mpsse_ctx *ctx, const uint8_t *out, unsigned out_offset, uint8_t *in,
+ unsigned in_offset, unsigned length, bool tdi, uint8_t mode)
+{
+ DEBUG_IO("%sout %d bits, tdi=%d", in ? "in" : "", length, tdi);
+ assert(out);
+ int retval = ERROR_OK;
+
+ mode |= 0x42;
+ if (in)
+ mode |= 0x20;
+
+ while (length > 0) {
+ /* Guarantee buffer space enough for a minimum size transfer */
+ if (buffer_write_space(ctx) < 3 || (in && buffer_read_space(ctx) < 1))
+ retval = mpsse_flush(ctx);
+
+ /* Byte transfer */
+ unsigned this_bits = length;
+ /* MPSSE command limit */
+ /* NOTE: there's a report of an FT2232 bug in this area, where shifting
+ * exactly 7 bits can make problems with TMS signaling for the last
+ * clock cycle:
+ *
+ * http://developer.intra2net.com/mailarchive/html/libftdi/2009/msg00292.html
+ */
+ if (this_bits > 7)
+ this_bits = 7;
+
+ if (this_bits > 0) {
+ buffer_write_byte(ctx, mode);
+ buffer_write_byte(ctx, this_bits - 1);
+ uint8_t data = 0;
+ /* TODO: Fix MSB first, if allowed in MPSSE */
+ bit_copy(&data, 0, out, out_offset, this_bits);
+ out_offset += this_bits;
+ buffer_write_byte(ctx, data | (tdi ? 0x80 : 0x00));
+ if (in)
+ in_offset += buffer_add_read(ctx,
+ in,
+ in_offset,
+ this_bits,
+ 8 - this_bits);
+ length -= this_bits;
+ }
+ }
+ return retval;
+}
+
+int mpsse_set_data_bits_low_byte(struct mpsse_ctx *ctx, uint8_t data, uint8_t dir)
+{
+ DEBUG_IO("-");
+ int retval = ERROR_OK;
+
+ if (buffer_write_space(ctx) < 3)
+ retval = mpsse_flush(ctx);
+
+ buffer_write_byte(ctx, 0x80);
+ buffer_write_byte(ctx, data);
+ buffer_write_byte(ctx, dir);
+
+ return retval;
+}
+
+int mpsse_set_data_bits_high_byte(struct mpsse_ctx *ctx, uint8_t data, uint8_t dir)
+{
+ DEBUG_IO("-");
+ int retval = ERROR_OK;
+
+ if (buffer_write_space(ctx) < 3)
+ retval = mpsse_flush(ctx);
+
+ buffer_write_byte(ctx, 0x82);
+ buffer_write_byte(ctx, data);
+ buffer_write_byte(ctx, dir);
+
+ return retval;
+}
+
+int mpsse_read_data_bits_low_byte(struct mpsse_ctx *ctx, uint8_t *data)
+{
+ DEBUG_IO("-");
+ int retval = ERROR_OK;
+
+ if (buffer_write_space(ctx) < 1)
+ retval = mpsse_flush(ctx);
+
+ buffer_write_byte(ctx, 0x81);
+ buffer_add_read(ctx, data, 0, 8, 0);
+
+ return retval;
+}
+
+int mpsse_read_data_bits_high_byte(struct mpsse_ctx *ctx, uint8_t *data)
+{
+ DEBUG_IO("-");
+ int retval = ERROR_OK;
+
+ if (buffer_write_space(ctx) < 1)
+ retval = mpsse_flush(ctx);
+
+ buffer_write_byte(ctx, 0x83);
+ buffer_add_read(ctx, data, 0, 8, 0);
+
+ return retval;
+}
+
+static int single_byte_boolean_helper(struct mpsse_ctx *ctx, bool var, uint8_t val_if_true,
+ uint8_t val_if_false)
+{
+ int retval = ERROR_OK;
+
+ if (buffer_write_space(ctx) < 1)
+ retval = mpsse_flush(ctx);
+
+ buffer_write_byte(ctx, var ? val_if_true : val_if_false);
+
+ return retval;
+}
+
+int mpsse_loopback_config(struct mpsse_ctx *ctx, bool enable)
+{
+ LOG_DEBUG("%s", enable ? "on" : "off");
+ return single_byte_boolean_helper(ctx, enable, 0x84, 0x85);
+}
+
+int mpsse_set_divisor(struct mpsse_ctx *ctx, uint16_t divisor)
+{
+ LOG_DEBUG("%d", divisor);
+ int retval = ERROR_OK;
+
+ if (buffer_write_space(ctx) < 3)
+ retval = mpsse_flush(ctx);
+
+ buffer_write_byte(ctx, 0x86);
+ buffer_write_byte(ctx, divisor & 0xff);
+ buffer_write_byte(ctx, divisor >> 8);
+
+ return retval;
+}
+
+int mpsse_divide_by_5_config(struct mpsse_ctx *ctx, bool enable)
+{
+ if (!mpsse_is_high_speed(ctx))
+ return ERROR_FAIL;
+
+ LOG_DEBUG("%s", enable ? "on" : "off");
+
+ return single_byte_boolean_helper(ctx, enable, 0x8b, 0x8a);
+}
+
+int mpsse_rtck_config(struct mpsse_ctx *ctx, bool enable)
+{
+ if (!mpsse_is_high_speed(ctx))
+ return ERROR_FAIL;
+
+ LOG_DEBUG("%s", enable ? "on" : "off");
+
+ return single_byte_boolean_helper(ctx, enable, 0x96, 0x97);
+}
+
+int mpsse_set_frequency(struct mpsse_ctx *ctx, int frequency)
+{
+ LOG_DEBUG("target %d Hz", frequency);
+ assert(frequency >= 0);
+ int base_clock;
+
+ if (frequency == 0)
+ return mpsse_rtck_config(ctx, true);
+
+ mpsse_rtck_config(ctx, false); /* just try */
+
+ if (frequency > 60000000 / 2 / 65536 && mpsse_is_high_speed(ctx)) {
+ int retval = mpsse_divide_by_5_config(ctx, false);
+ if (retval != ERROR_OK)
+ return retval;
+ base_clock = 60000000;
+ } else {
+ mpsse_divide_by_5_config(ctx, true); /* just try */
+ base_clock = 12000000;
+ }
+
+ int divisor = (base_clock / 2 + frequency - 1) / frequency - 1;
+ if (divisor > 65535)
+ divisor = 65535;
+ assert(divisor >= 0);
+
+ int retval = mpsse_set_divisor(ctx, divisor);
+ if (retval != ERROR_OK)
+ return retval;
+
+ frequency = base_clock / 2 / (1 + divisor);
+ LOG_DEBUG("actually %d Hz", frequency);
+
+ return frequency;
+}
+
+/* Context needed by the callbacks */
+struct transfer_result {
+ struct mpsse_ctx *ctx;
+ bool done;
+ unsigned transferred;
+};
+
+static LIBUSB_CALL void read_cb(struct libusb_transfer *transfer)
+{
+ struct transfer_result *res = (struct transfer_result *)transfer->user_data;
+ struct mpsse_ctx *ctx = res->ctx;
+
+ unsigned packet_size = ctx->max_packet_size;
+
+ DEBUG_PRINT_BUF(transfer->buffer, transfer->actual_length);
+
+ /* Strip the two status bytes sent at the beginning of each USB packet
+ * while copying the chunk buffer to the read buffer */
+ unsigned num_packets = DIV_ROUND_UP(transfer->actual_length, packet_size);
+ unsigned chunk_remains = transfer->actual_length;
+ for (unsigned i = 0; i < num_packets && chunk_remains > 2; i++) {
+ unsigned this_size = packet_size - 2;
+ if (this_size > chunk_remains - 2)
+ this_size = chunk_remains - 2;
+ if (this_size > ctx->read_count - res->transferred)
+ this_size = ctx->read_count - res->transferred;
+ memcpy(ctx->read_buffer + res->transferred,
+ ctx->read_chunk + packet_size * i + 2,
+ this_size);
+ res->transferred += this_size;
+ chunk_remains -= this_size + 2;
+ if (res->transferred == ctx->read_count) {
+ res->done = true;
+ break;
+ }
+ }
+
+ DEBUG_IO("raw chunk %d, transferred %d of %d", transfer->actual_length, res->transferred,
+ ctx->read_count);
+
+ if (!res->done)
+ if (libusb_submit_transfer(transfer) != LIBUSB_SUCCESS)
+ res->done = true;
+}
+
+static LIBUSB_CALL void write_cb(struct libusb_transfer *transfer)
+{
+ struct transfer_result *res = (struct transfer_result *)transfer->user_data;
+ struct mpsse_ctx *ctx = res->ctx;
+
+ res->transferred += transfer->actual_length;
+
+ DEBUG_IO("transferred %d of %d", res->transferred, ctx->write_count);
+
+ DEBUG_PRINT_BUF(transfer->buffer, transfer->actual_length);
+
+ if (res->transferred == ctx->write_count)
+ res->done = true;
+ else {
+ transfer->length = ctx->write_count - res->transferred;
+ transfer->buffer = ctx->write_buffer + res->transferred;
+ if (libusb_submit_transfer(transfer) != LIBUSB_SUCCESS)
+ res->done = true;
+ }
+}
+
+int mpsse_flush(struct mpsse_ctx *ctx)
+{
+ DEBUG_IO("write %d%s, read %d", ctx->write_count, ctx->read_count ? "+1" : "",
+ ctx->read_count);
+ assert(ctx->write_count > 0 || ctx->read_count == 0); /* No read data without write data */
+ int retval = ERROR_OK;
+
+ if (ctx->write_count == 0)
+ return retval;
+
+ struct libusb_transfer *read_transfer = 0;
+ struct transfer_result read_result = { .ctx = ctx, .done = true };
+ if (ctx->read_count) {
+ buffer_write_byte(ctx, 0x87); /* SEND_IMMEDIATE */
+ read_result.done = false;
+ read_transfer = libusb_alloc_transfer(0);
+ libusb_fill_bulk_transfer(read_transfer, ctx->usb_dev, ctx->in_ep, ctx->read_chunk,
+ ctx->read_chunk_size, read_cb, &read_result,
+ ctx->usb_read_timeout);
+ retval = libusb_submit_transfer(read_transfer);
+ }
+
+ struct transfer_result write_result = { .ctx = ctx, .done = false };
+ struct libusb_transfer *write_transfer = libusb_alloc_transfer(0);
+ libusb_fill_bulk_transfer(write_transfer, ctx->usb_dev, ctx->out_ep, ctx->write_buffer,
+ ctx->write_count, write_cb, &write_result, ctx->usb_write_timeout);
+ retval = libusb_submit_transfer(write_transfer);
+
+ /* Polling loop, more or less taken from libftdi */
+ while (!write_result.done || !read_result.done) {
+ retval = libusb_handle_events(ctx->usb_ctx);
+ keep_alive();
+ if (retval != LIBUSB_SUCCESS && retval != LIBUSB_ERROR_INTERRUPTED) {
+ libusb_cancel_transfer(write_transfer);
+ if (read_transfer)
+ libusb_cancel_transfer(read_transfer);
+ while (!write_result.done || !read_result.done)
+ if (libusb_handle_events(ctx->usb_ctx) != LIBUSB_SUCCESS)
+ break;
+ }
+ }
+
+ if (retval != LIBUSB_SUCCESS) {
+ LOG_ERROR("libusb_handle_events() failed with %d", retval);
+ retval = ERROR_FAIL;
+ } else if (write_result.transferred < ctx->write_count) {
+ LOG_ERROR("ftdi device did not accept all data: %d, tried %d",
+ write_result.transferred,
+ ctx->write_count);
+ retval = ERROR_FAIL;
+ } else if (read_result.transferred < ctx->read_count) {
+ LOG_ERROR("ftdi device did not return all data: %d, expected %d",
+ read_result.transferred,
+ ctx->read_count);
+ retval = ERROR_FAIL;
+ } else if (ctx->read_count) {
+ ctx->write_count = 0;
+ ctx->read_count = 0;
+ bit_copy_execute(&ctx->read_queue);
+ retval = ERROR_OK;
+ } else {
+ ctx->write_count = 0;
+ bit_copy_discard(&ctx->read_queue);
+ retval = ERROR_OK;
+ }
+
+ libusb_free_transfer(write_transfer);
+ if (read_transfer)
+ libusb_free_transfer(read_transfer);
+
+ if (retval != ERROR_OK)
+ mpsse_purge(ctx);
+
+ return retval;
+}
Code Review / openocd.git / commitdiff