NOR: lpc2000 Add support for LPC84x devices 84/4684/10
authorRod Boyce <developer@teamboyce.co.uk>
Sun, 16 Dec 2018 17:41:39 +0000 (17:41 +0000)
committerTomas Vanek <vanekt@fbl.cz>
Wed, 2 Jan 2019 21:54:03 +0000 (21:54 +0000)
These devices differ from LPC8xx devices in that they have a different
IAP entry point, but everything else is the same.  Using Tcl to pass
different IAP entry point.
no new Clang analyser warnings and no new build sanitizers issues.

Change-Id: I2d654dd250f416e74262c0228cad8713a283402f
Signed-off-by: Rod Boyce <developer@teamboyce.co.uk>
Reviewed-on: http://openocd.zylin.com/4684
Reviewed-by: Jean-Christian de Rivaz <jcamdr70@gmail.com>
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
doc/openocd.texi
src/flash/nor/lpc2000.c
tcl/target/lpc1xxx.cfg
tcl/target/lpc84x.cfg [new file with mode: 0644]

index 21b55dc..4b1a5de 100644 (file)
@@ -5910,7 +5910,7 @@ The LPC2888 is supported by the @var{lpc288x} driver.
 The LPC29xx family is supported by the @var{lpc2900} driver.
 @end quotation
 
-The @var{lpc2000} driver defines two mandatory and one optional parameters,
+The @var{lpc2000} driver defines two mandatory and two optional parameters,
 which must appear in the following order:
 
 @itemize
@@ -5937,6 +5937,8 @@ table, the boot ROM will almost certainly ignore your flash image.
 However, if you do provide it,
 with most tool chains @command{verify_image} will fail.
 @end quotation
+@item @option{iap_entry} ... optional telling the driver to use a different
+ROM IAP entry point.
 @end itemize
 
 LPC flashes don't require the chip and bus width to be specified.
index 53ece42..e62fc79 100644 (file)
@@ -82,6 +82,7 @@
  * - 822 | 4 (tested with LPC824)
  * - 8N04
  * - NHS31xx (tested with NHS3100)
+ * - 844 | 5 (tested with LPC845)
  *
  * lpc1100:
  * - 11xx
 #define NHS3152        0x4e315220
 #define NHS3153        0x4e315320 /* Only specified in Rev.1 of the datasheet */
 
+#define LPC844_201     0x00008441
+#define LPC844_201_1   0x00008442
+#define LPC844_201_2   0x00008444
+
+#define LPC845_301     0x00008451
+#define LPC845_301_1   0x00008452
+#define LPC845_301_2   0x00008453
+#define LPC845_301_3   0x00008454
+
 #define IAP_CODE_LEN 0x34
 
 #define LPC11xx_REG_SECTORS    24
@@ -294,6 +304,7 @@ struct lpc2000_flash_bank {
        int checksum_vector;
        uint32_t iap_max_stack;
        uint32_t lpc4300_bank;
+       uint32_t iap_entry_alternative;
        bool probed;
 };
 
@@ -546,6 +557,10 @@ static int lpc2000_build_sector_list(struct flash_bank *bank)
                                lpc2000_info->cmd51_max_buffer = 1024; /* For LPC824, has 8kB of SRAM */
                                bank->num_sectors = 32;
                                break;
+                       case 64 * 1024:
+                               lpc2000_info->cmd51_max_buffer = 1024; /* For LPC844, has 8kB of SRAM */
+                               bank->num_sectors = 64;
+                               break;
                        default:
                                LOG_ERROR("BUG: unknown bank->size encountered");
                                exit(-1);
@@ -757,6 +772,9 @@ static int lpc2000_iap_call(struct flash_bank *bank, struct working_area *iap_wo
                        exit(-1);
        }
 
+       if (lpc2000_info->iap_entry_alternative != 0x0)
+               iap_entry_point = lpc2000_info->iap_entry_alternative;
+
        struct mem_param mem_params[2];
 
        /* command parameter table */
@@ -954,6 +972,8 @@ FLASH_BANK_COMMAND_HANDLER(lpc2000_flash_bank_command)
                if (strcmp(CMD_ARGV[8], "calc_checksum") == 0)
                        lpc2000_info->calc_checksum = 1;
        }
+       if (CMD_ARGC >= 10 && !lpc2000_info->iap_entry_alternative)
+               COMMAND_PARSE_NUMBER(u32, CMD_ARGV[9], lpc2000_info->iap_entry_alternative);
 
        return ERROR_OK;
 }
@@ -1476,6 +1496,17 @@ static int lpc2000_auto_probe_flash(struct flash_bank *bank)
                        bank->size = 30 * 1024;
                        break;
 
+               case LPC844_201:
+               case LPC844_201_1:
+               case LPC844_201_2:
+               case LPC845_301:
+               case LPC845_301_1:
+               case LPC845_301_2:
+               case LPC845_301_3:
+                       lpc2000_info->variant = lpc800;
+                       bank->size = 64 * 1024;
+                       break;
+
                default:
                        LOG_ERROR("BUG: unknown Part ID encountered: 0x%" PRIx32, part_id);
                        exit(-1);
index 701adf2..1969e46 100644 (file)
@@ -99,10 +99,14 @@ $_TARGETNAME configure -work-area-phys 0x10000000 -work-area-size $_WORKAREASIZE
 # (same cmd51 destination boundary alignment, and all three support 256 byte
 # transfers).
 #
-# flash bank <name> lpc2000 <base> <size> 0 0 <target#> <variant> <clock> [calc checksum]
+# flash bank <name> lpc2000 <base> <size> 0 0 <target#> <variant> <clock> [calc checksum] [iap entry]
+set _IAP_ENTRY 0
+if { [info exists IAP_ENTRY] } {
+       set _IAP_ENTRY $IAP_ENTRY
+}
 set _FLASHNAME $_CHIPNAME.flash
 flash bank $_FLASHNAME lpc2000 0x0 0 0 0 $_TARGETNAME \
-       auto $_CCLK calc_checksum
+       auto $_CCLK calc_checksum $_IAP_ENTRY
 
 if { $_CHIPSERIES == "lpc800" || $_CHIPSERIES == "lpc1100" || $_CHIPSERIES == "lpc1200" || $_CHIPSERIES == "lpc1300" } {
        # Do not remap 0x0000-0x0200 to anything but the flash (i.e. select
diff --git a/tcl/target/lpc84x.cfg b/tcl/target/lpc84x.cfg
new file mode 100644 (file)
index 0000000..cb36698
--- /dev/null
@@ -0,0 +1,11 @@
+# NXP LPC84x Cortex-M0+ with at least 8kB SRAM
+if { ![info exists CHIPNAME] } {
+       set CHIPNAME lpc84x
+}
+set CHIPSERIES lpc800
+if { ![info exists WORKAREASIZE] } {
+       set WORKAREASIZE 0x1fe0
+}
+
+set IAP_ENTRY 0x0F001FF1
+source [find target/lpc1xxx.cfg]