int handle_arm7_9_dcc_downloads_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
int handle_arm7_9_etm_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+/**
+ * Clear watchpoints for an ARM7/9 target.
+ *
+ * @param arm7_9 Pointer to the common struct for an ARM7/9 target
+ * @return JTAG error status after executing queue
+ */
static int arm7_9_clear_watchpoints(arm7_9_common_t *arm7_9)
{
embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W0_CONTROL_VALUE], 0x0);
return jtag_execute_queue();
}
+/**
+ * Assign a watchpoint to one of the two available hardware comparators in an
+ * ARM7 or ARM9 target.
+ *
+ * @param arm7_9 Pointer to the common struct for an ARM7/9 target
+ * @param breakpoint Pointer to the breakpoint to be used as a watchpoint
+ */
static void arm7_9_assign_wp(arm7_9_common_t *arm7_9, breakpoint_t *breakpoint)
{
if (!arm7_9->wp0_used)
}
}
-/* set up embedded ice registers */
+/**
+ * Setup an ARM7/9 target's embedded ICE registers for software breakpoints.
+ *
+ * @param arm7_9 Pointer to common struct for ARM7/9 targets
+ * @return Error codes if there is a problem finding a watchpoint or the result
+ * of executing the JTAG queue
+ */
static int arm7_9_set_software_breakpoints(arm7_9_common_t *arm7_9)
{
if (arm7_9->sw_breakpoints_added)
return jtag_execute_queue();
}
-/* set things up after a reset / on startup */
+/**
+ * Setup the common pieces for an ARM7/9 target after reset or on startup.
+ *
+ * @param target Pointer to an ARM7/9 target to setup
+ * @return Result of clearing the watchpoints on the target
+ */
int arm7_9_setup(target_t *target)
{
armv4_5_common_t *armv4_5 = target->arch_info;
return arm7_9_clear_watchpoints(arm7_9);
}
+/**
+ * Retrieves the architecture information pointers for ARMv4/5 and ARM7/9
+ * targets. A return of ERROR_OK signifies that the target is a valid target
+ * and that the pointers have been set properly.
+ *
+ * @param target Pointer to the target device to get the pointers from
+ * @param armv4_5_p Pointer to be filled in with the common struct for ARMV4/5
+ * targets
+ * @param arm7_9_p Pointer to be filled in with the common struct for ARM7/9
+ * targets
+ * @return ERROR_OK if successful
+ */
int arm7_9_get_arch_pointers(target_t *target, armv4_5_common_t **armv4_5_p, arm7_9_common_t **arm7_9_p)
{
armv4_5_common_t *armv4_5 = target->arch_info;
return ERROR_OK;
}
-/* we set up the breakpoint even if it is already set. Some action, e.g. reset
- * might have erased the values in embedded ice
+/**
+ * Set either a hardware or software breakpoint on an ARM7/9 target. The
+ * breakpoint is set up even if it is already set. Some actions, e.g. reset,
+ * might have erased the values in Embedded ICE.
+ *
+ * @param target Pointer to the target device to set the breakpoints on
+ * @param breakpoint Pointer to the breakpoint to be set
+ * @return For hardware breakpoints, this is the result of executing the JTAG
+ * queue. For software breakpoints, this will be the status of the
+ * required memory reads and writes
*/
int arm7_9_set_breakpoint(struct target_s *target, breakpoint_t *breakpoint)
{
return retval;
}
+/**
+ * Unsets an existing breakpoint on an ARM7/9 target. If it is a hardware
+ * breakpoint, the watchpoint used will be freed and the Embedded ICE registers
+ * will be updated. Otherwise, the software breakpoint will be restored to its
+ * original instruction if it hasn't already been modified.
+ *
+ * @param target Pointer to ARM7/9 target to unset the breakpoint from
+ * @param breakpoint Pointer to breakpoint to be unset
+ * @return For hardware breakpoints, this is the result of executing the JTAG
+ * queue. For software breakpoints, this will be the status of the
+ * required memory reads and writes
+ */
int arm7_9_unset_breakpoint(struct target_s *target, breakpoint_t *breakpoint)
{
int retval = ERROR_OK;
return retval;
}
+/**
+ * Add a breakpoint to an ARM7/9 target. This makes sure that there are no
+ * dangling breakpoints and that the desired breakpoint can be added.
+ *
+ * @param target Pointer to the target ARM7/9 device to add a breakpoint to
+ * @param breakpoint Pointer to the breakpoint to be added
+ * @return An error status if there is a problem adding the breakpoint or the
+ * result of setting the breakpoint
+ */
int arm7_9_add_breakpoint(struct target_s *target, breakpoint_t *breakpoint)
{
armv4_5_common_t *armv4_5 = target->arch_info;
return arm7_9_set_breakpoint(target, breakpoint);
}
+/**
+ * Removes a breakpoint from an ARM7/9 target. This will make sure there are no
+ * dangling breakpoints and updates available watchpoints if it is a hardware
+ * breakpoint.
+ *
+ * @param target Pointer to the target to have a breakpoint removed
+ * @param breakpoint Pointer to the breakpoint to be removed
+ * @return Error status if there was a problem unsetting the breakpoint or the
+ * watchpoints could not be cleared
+ */
int arm7_9_remove_breakpoint(struct target_s *target, breakpoint_t *breakpoint)
{
int retval = ERROR_OK;
return ERROR_OK;
}
+/**
+ * Sets a watchpoint for an ARM7/9 target in one of the watchpoint units. It is
+ * considered a bug to call this function when there are no available watchpoint
+ * units.
+ *
+ * @param target Pointer to an ARM7/9 target to set a watchpoint on
+ * @param watchpoint Pointer to the watchpoint to be set
+ * @return Error status if watchpoint set fails or the result of executing the
+ * JTAG queue
+ */
int arm7_9_set_watchpoint(struct target_s *target, watchpoint_t *watchpoint)
{
int retval = ERROR_OK;
return ERROR_OK;
}
+/**
+ * Unset an existing watchpoint and clear the used watchpoint unit.
+ *
+ * @param target Pointer to the target to have the watchpoint removed
+ * @param watchpoint Pointer to the watchpoint to be removed
+ * @return Error status while trying to unset the watchpoint or the result of
+ * executing the JTAG queue
+ */
int arm7_9_unset_watchpoint(struct target_s *target, watchpoint_t *watchpoint)
{
int retval = ERROR_OK;
return ERROR_OK;
}
+/**
+ * Add a watchpoint to an ARM7/9 target. If there are no watchpoint units
+ * available, an error response is returned.
+ *
+ * @param target Pointer to the ARM7/9 target to add a watchpoint to
+ * @param watchpoint Pointer to the watchpoint to be added
+ * @return Error status while trying to add the watchpoint
+ */
int arm7_9_add_watchpoint(struct target_s *target, watchpoint_t *watchpoint)
{
armv4_5_common_t *armv4_5 = target->arch_info;
return ERROR_OK;
}
+/**
+ * Remove a watchpoint from an ARM7/9 target. The watchpoint will be unset and
+ * the used watchpoint unit will be reopened.
+ *
+ * @param target Pointer to the target to remove a watchpoint from
+ * @param watchpoint Pointer to the watchpoint to be removed
+ * @return Result of trying to unset the watchpoint
+ */
int arm7_9_remove_watchpoint(struct target_s *target, watchpoint_t *watchpoint)
{
int retval = ERROR_OK;
return ERROR_OK;
}
+/**
+ * Restarts the target by sending a RESTART instruction and moving the JTAG
+ * state to IDLE. This includes a timeout waiting for DBGACK and SYSCOMP to be
+ * asserted by the processor.
+ *
+ * @param target Pointer to target to issue commands to
+ * @return Error status if there is a timeout or a problem while executing the
+ * JTAG queue
+ */
int arm7_9_execute_sys_speed(struct target_s *target)
{
int retval;
return ERROR_OK;
}
+/**
+ * Restarts the target by sending a RESTART instruction and moving the JTAG
+ * state to IDLE. This validates that DBGACK and SYSCOMP are set without
+ * waiting until they are.
+ *
+ * @param target Pointer to the target to issue commands to
+ * @return Always ERROR_OK
+ */
int arm7_9_execute_fast_sys_speed(struct target_s *target)
{
static int set=0;
}
/* read debug status register */
- embeddedice_read_reg_w_check(dbg_stat, check_value, check_value);
+ embeddedice_read_reg_w_check(dbg_stat, check_value, check_mask);
return ERROR_OK;
}
Code Review / openocd.git / commitdiff