stm32lx.c: Read IDcode at appropriate address.

Trying to read the L0 idcode at the L1 idcode address 0xE0042000 often
resulted in an uncatched error. Reading at the right L0 address 0x40015800
afterwards results in reading 0. So access to the device is denied..

Change-Id: I6de92cf99a5d5d46c72f9ba055613cbc5753a951
Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Reviewed-on: http://openocd.zylin.com/3883
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

diff --git a/src/flash/nor/stm32lx.c b/src/flash/nor/stm32lx.c
index 0c2fddc92004a3d6eca5cbfd8fb40d05eb7c873f..fdfaad4cf7e8102f7593312bf471b39059512129 100644 (file)
--- a/src/flash/nor/stm32lx.c
+++ b/src/flash/nor/stm32lx.c
@@ -726,16 +726,13 @@ reset_pg_and_lock:
 
 static int stm32lx_read_id_code(struct target *target, uint32_t *id)
 {
 
 static int stm32lx_read_id_code(struct target *target, uint32_t *id)
 {

-       /* read stm32 device id register */
-       int retval = target_read_u32(target, DBGMCU_IDCODE, id);
-       if (retval != ERROR_OK)
-               return retval;
-
-       /* STM32L0 parts will have 0 there, try reading the L0's location for
-        * DBG_IDCODE in case this is an L0 part. */
-       if (*id == 0)
+       struct armv7m_common *armv7m = target_to_armv7m(target);
+       int retval;
+       if (armv7m->arm.is_armv6m == true)

                retval = target_read_u32(target, DBGMCU_IDCODE_L0, id);
                retval = target_read_u32(target, DBGMCU_IDCODE_L0, id);

-
+       else
+       /* read stm32 device id register */
+               retval = target_read_u32(target, DBGMCU_IDCODE, id);

        return retval;
 }
 
        return retval;
 }