target: Remove read_memory_imp 19/1219/2
authorAndreas Fritiofson <andreas.fritiofson@gmail.com>
Sun, 10 Mar 2013 13:39:31 +0000 (14:39 +0100)
committerSpencer Oliver <spen@spen-soft.co.uk>
Wed, 13 Mar 2013 12:36:09 +0000 (12:36 +0000)
Change-Id: Idc6ef3b075ccbb5945df8fea746011cb17175d8f
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/1219
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
src/rtos/linux.c
src/target/cortex_a.c
src/target/target.c
src/target/target.h
src/target/target_type.h

index e0f71ef46c83ca60170874d68adbdfe975216522..23b1a9e58c751dce6c571e448b29ad2d1b397edd 100644 (file)
@@ -140,9 +140,9 @@ static int linux_read_memory(struct target *target,
                return ERROR_FAIL;
        }
 #ifdef PHYS
-       target->type->read_phys_memory(target, pa, size, count, buffer);
+       target_read_phys_memory(target, pa, size, count, buffer);
 #endif
-       target->type->read_memory(target, address, size, count, buffer);
+       target_read_memory(target, address, size, count, buffer);
        return ERROR_OK;
 }
 
index ead35deb7daf9897b1e206b91c315561b46191ca..3923b3d10d0ecec9ceaf9a26ca64e4840c692d26 100644 (file)
@@ -1398,7 +1398,7 @@ static int cortex_a8_set_breakpoint(struct target *target,
                        buf_set_u32(code, 0, 32, ARMV5_T_BKPT(0x11));
                else
                        buf_set_u32(code, 0, 32, ARMV5_BKPT(0x11));
-               retval = target->type->read_memory(target,
+               retval = target_read_memory(target,
                                breakpoint->address & 0xFFFFFFFE,
                                breakpoint->length, 1,
                                breakpoint->orig_instr);
index 183005e4d08e2c5817eb990e5182ce7f4bb2ba8c..db676b970537a032f353cd083083dfe0a14feae2 100644 (file)
@@ -657,16 +657,6 @@ const char *target_type_name(struct target *target)
        return target->type->name;
 }
 
-static int target_read_memory_imp(struct target *target, uint32_t address,
-               uint32_t size, uint32_t count, uint8_t *buffer)
-{
-       if (!target_was_examined(target)) {
-               LOG_ERROR("Target not examined yet");
-               return ERROR_FAIL;
-       }
-       return target->type->read_memory_imp(target, address, size, count, buffer);
-}
-
 static int target_soft_reset_halt(struct target *target)
 {
        if (!target_was_examined(target)) {
@@ -941,12 +931,20 @@ int target_run_flash_async_algorithm(struct target *target,
 int target_read_memory(struct target *target,
                uint32_t address, uint32_t size, uint32_t count, uint8_t *buffer)
 {
+       if (!target_was_examined(target)) {
+               LOG_ERROR("Target not examined yet");
+               return ERROR_FAIL;
+       }
        return target->type->read_memory(target, address, size, count, buffer);
 }
 
-static int target_read_phys_memory(struct target *target,
+int target_read_phys_memory(struct target *target,
                uint32_t address, uint32_t size, uint32_t count, uint8_t *buffer)
 {
+       if (!target_was_examined(target)) {
+               LOG_ERROR("Target not examined yet");
+               return ERROR_FAIL;
+       }
        return target->type->read_phys_memory(target, address, size, count, buffer);
 }
 
@@ -960,7 +958,7 @@ int target_write_memory(struct target *target,
        return target->type->write_memory(target, address, size, count, buffer);
 }
 
-static int target_write_phys_memory(struct target *target,
+int target_write_phys_memory(struct target *target,
                uint32_t address, uint32_t size, uint32_t count, const uint8_t *buffer)
 {
        if (!target_was_examined(target)) {
@@ -1083,17 +1081,6 @@ static int target_init_one(struct command_context *cmd_ctx,
                return retval;
        }
 
-       /**
-        * @todo get rid of those *memory_imp() methods, now that all
-        * callers are using target_*_memory() accessors ... and make
-        * sure the "physical" paths handle the same issues.
-        */
-       /* a non-invasive way(in terms of patches) to add some code that
-        * runs before the type->write/read_memory implementation
-        */
-       type->read_memory_imp = target->type->read_memory;
-       type->read_memory = target_read_memory_imp;
-
        /* Sanity-check MMU support ... stub in what we must, to help
         * implement it in stages, but warn if we need to do so.
         */
index 3eade513a2da87df8ece319feabe4f93b3107d12..3baafbe70d09278e57beb66ce3643e8412905b25 100644 (file)
@@ -461,6 +461,8 @@ int target_run_flash_async_algorithm(struct target *target,
  */
 int target_read_memory(struct target *target,
                uint32_t address, uint32_t size, uint32_t count, uint8_t *buffer);
+int target_read_phys_memory(struct target *target,
+               uint32_t address, uint32_t size, uint32_t count, uint8_t *buffer);
 /**
  * Write @a count items of @a size bytes to the memory of @a target at
  * the @a address given. @a address must be aligned to @a size
@@ -480,6 +482,8 @@ int target_read_memory(struct target *target,
  */
 int target_write_memory(struct target *target,
                uint32_t address, uint32_t size, uint32_t count, const uint8_t *buffer);
+int target_write_phys_memory(struct target *target,
+               uint32_t address, uint32_t size, uint32_t count, const uint8_t *buffer);
 
 /**
  * Write @a count items of 4 bytes to the memory of @a target at
index 6017e334a15cca8b725bd4d5661f21057b188ac7..5b72d841ab4be87b53319acb20783dcd2748046f 100644 (file)
@@ -107,8 +107,7 @@ struct target_type {
        * size: 1 = byte (8bit), 2 = half-word (16bit), 4 = word (32bit)
        * count: number of items of <size>
        */
-       int (*read_memory_imp)(struct target *target, uint32_t address,
-                       uint32_t size, uint32_t count, uint8_t *buffer);
+
        /**
         * Target memory read callback.  Do @b not call this function
         * directly, use target_read_memory() instead.

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)