stlink: remove stlink_api command

Remove stlink_api command.

Change-Id: I8f7885d3756fec462f9ebbee2ed285a98a51366c
Signed-off-by: Mathias K <kesmtp@freenet.de>
Reviewed-on: http://openocd.zylin.com/1760
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

diff --git a/doc/openocd.texi b/doc/openocd.texi
index 5f2b89ed8e35b96fff57b9780d22acb470ffc9d1..7558eb8b3082a3ae7f5db22d8cb112aec483d2d1 100644 (file)
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -3041,10 +3041,6 @@ Specifies the adapter layout to use.
 The vendor ID and product ID of the device.
 @end deffn
 
-@deffn {Config Command} {stlink_api} api_level
-Manually sets the stlink api used, valid options are 1 or 2. (@b{STLINK Only}).
-@end deffn
-
 @deffn {Config Command} {trace} source_clock_hz [output_file_path]
 Enable SWO tracing (if supported). The source clock rate for the
 trace port must be specified, this is typically the CPU clock rate. If

diff --git a/src/jtag/drivers/stlink_usb.c b/src/jtag/drivers/stlink_usb.c
index 957f1d40fdd7bd642837c48a7ab484b2e3e65a7d..597df6d00e8b26e47f6b9af977ee5a265af76a29 100644 (file)
--- a/src/jtag/drivers/stlink_usb.c
+++ b/src/jtag/drivers/stlink_usb.c
@@ -1652,12 +1652,7 @@ static int stlink_usb_open(struct hl_interface_param_s *param, void **fd)
 
        api = h->version.jtag_api_max;
 
-       /* check that user has not requested certain api version
-        * and if they have check it is supported */
-       if ((param->api != 0) && (param->api <= h->version.jtag_api_max)) {
-               api = param->api;
-               LOG_INFO("using stlink api v%d", api);
-       }
+       LOG_INFO("using stlink api v%d", api);
 
        /* set the used jtag api, this will default to the newest supported version */
        h->jtag_api = api;

diff --git a/src/jtag/hla/hla_interface.c b/src/jtag/hla/hla_interface.c
index 81cac4886d26181b631f8602a970d9e893c429b5..1b6a3e31dcf1904e1553fb64c75a48d9863b7528 100644 (file)
--- a/src/jtag/hla/hla_interface.c
+++ b/src/jtag/hla/hla_interface.c
@@ -214,21 +214,6 @@ COMMAND_HANDLER(hl_interface_handle_vid_pid_command)
        return ERROR_OK;
 }
 
-COMMAND_HANDLER(stlink_interface_handle_api_command)
-{
-       if (CMD_ARGC != 1)
-               return ERROR_COMMAND_SYNTAX_ERROR;
-
-       unsigned new_api;
-       COMMAND_PARSE_NUMBER(uint, CMD_ARGV[0], new_api);
-       if ((new_api == 0) || (new_api > 2))
-               return ERROR_COMMAND_SYNTAX_ERROR;
-
-       hl_if.param.api = new_api;
-
-       return ERROR_OK;
-}
-
 COMMAND_HANDLER(interface_handle_trace_command)
 {
        FILE *f = NULL;
@@ -284,13 +269,6 @@ static const struct command_registration hl_interface_command_handlers[] = {
         .usage = "(vid pid)* ",
         },
         {
-        .name = "stlink_api",
-        .handler = &stlink_interface_handle_api_command,
-        .mode = COMMAND_CONFIG,
-        .help = "set the desired stlink api level",
-        .usage = "api version 1 or 2",
-        },
-        {
         .name = "trace",
         .handler = &interface_handle_trace_command,
         .mode = COMMAND_CONFIG,